Home
last modified time | relevance | path

Searched refs:hw_dbg (Results 1 - 25 of 58) sorted by relevance

123

/kernel/linux/linux-6.6/drivers/net/ethernet/intel/igc/
H A Digc_phy.c200 hw_dbg("Timeout is expired after a phy reset\n"); in igc_phy_hw_reset()
270 hw_dbg("autoneg_advertised %x\n", phy->autoneg_advertised); in igc_phy_setup_autoneg()
274 hw_dbg("Advertise 10mb Half duplex\n"); in igc_phy_setup_autoneg()
280 hw_dbg("Advertise 10mb Full duplex\n"); in igc_phy_setup_autoneg()
286 hw_dbg("Advertise 100mb Half duplex\n"); in igc_phy_setup_autoneg()
292 hw_dbg("Advertise 100mb Full duplex\n"); in igc_phy_setup_autoneg()
298 hw_dbg("Advertise 1000mb Half duplex request denied!\n"); in igc_phy_setup_autoneg()
302 hw_dbg("Advertise 1000mb Full duplex\n"); in igc_phy_setup_autoneg()
308 hw_dbg("Advertise 2500mb Half duplex request denied!\n"); in igc_phy_setup_autoneg()
312 hw_dbg("Advertis in igc_phy_setup_autoneg()
[all...]
H A Digc_mac.c40 hw_dbg("Master requests are pending.\n"); in igc_disable_pcie_master()
64 hw_dbg("Programming MAC Address into RAR[0]\n"); in igc_init_rx_addrs()
69 hw_dbg("Clearing RAR[1-%u]\n", rar_count - 1); in igc_init_rx_addrs()
141 hw_dbg("After fix-ups FlowControl is now = %x\n", hw->fc.current_mode); in igc_setup_link()
153 hw_dbg("Initializing the Flow Control address, type and timer regs\n"); in igc_setup_link()
200 hw_dbg("hw->fc.current_mode = %u\n", hw->fc.current_mode); in igc_force_mac_fc()
218 hw_dbg("Flow control param set incorrectly\n"); in igc_force_mac_fc()
410 hw_dbg("Error configuring flow control\n"); in igc_check_for_copper_link()
467 hw_dbg("Error forcing flow control settings\n"); in igc_config_fc_after_link_up()
491 hw_dbg("Coppe in igc_config_fc_after_link_up()
[all...]
H A Digc_i225.c74 hw_dbg("Driver can't access device - SMBI bit is set.\n"); in igc_get_hw_semaphore_i225()
94 hw_dbg("Driver can't access the NVM\n"); in igc_get_hw_semaphore_i225()
134 hw_dbg("Driver can't access resource, SW_FW_SYNC timeout.\n"); in igc_acquire_swfw_sync_i225()
165 hw_dbg("Failed to release SW_FW_SYNC.\n"); in igc_release_swfw_sync_i225()
238 hw_dbg("nvm parameter(s) out of bounds\n"); in igc_write_nvm_srwr()
260 hw_dbg("Shadow RAM write EEWR timed out\n"); in igc_write_nvm_srwr()
378 hw_dbg("Flash update time out\n"); in igc_update_flash_i225()
387 hw_dbg("Flash update time out\n"); in igc_update_flash_i225()
389 hw_dbg("Flash update complete\n"); in igc_update_flash_i225()
415 hw_dbg("EEPRO in igc_update_nvm_checksum_i225()
[all...]
H A Digc_nvm.c66 hw_dbg("Could not acquire NVM grant\n"); in igc_acquire_nvm()
108 hw_dbg("nvm parameter(s) out of bounds\n"); in igc_read_nvm_eerd()
170 hw_dbg("NVM Read Error\n"); in igc_validate_nvm_checksum()
177 hw_dbg("NVM Checksum Invalid\n"); in igc_validate_nvm_checksum()
203 hw_dbg("NVM Read Error while updating checksum.\n"); in igc_update_nvm_checksum()
211 hw_dbg("NVM Write Error while updating checksum.\n"); in igc_update_nvm_checksum()
/kernel/linux/linux-5.10/drivers/net/ethernet/intel/igc/
H A Digc_phy.c210 hw_dbg("Timeout is expired after a phy reset\n"); in igc_phy_hw_reset()
280 hw_dbg("autoneg_advertised %x\n", phy->autoneg_advertised); in igc_phy_setup_autoneg()
284 hw_dbg("Advertise 10mb Half duplex\n"); in igc_phy_setup_autoneg()
290 hw_dbg("Advertise 10mb Full duplex\n"); in igc_phy_setup_autoneg()
296 hw_dbg("Advertise 100mb Half duplex\n"); in igc_phy_setup_autoneg()
302 hw_dbg("Advertise 100mb Full duplex\n"); in igc_phy_setup_autoneg()
308 hw_dbg("Advertise 1000mb Half duplex request denied!\n"); in igc_phy_setup_autoneg()
312 hw_dbg("Advertise 1000mb Full duplex\n"); in igc_phy_setup_autoneg()
318 hw_dbg("Advertise 2500mb Half duplex request denied!\n"); in igc_phy_setup_autoneg()
322 hw_dbg("Advertis in igc_phy_setup_autoneg()
[all...]
H A Digc_mac.c40 hw_dbg("Master requests are pending.\n"); in igc_disable_pcie_master()
64 hw_dbg("Programming MAC Address into RAR[0]\n"); in igc_init_rx_addrs()
69 hw_dbg("Clearing RAR[1-%u]\n", rar_count - 1); in igc_init_rx_addrs()
141 hw_dbg("After fix-ups FlowControl is now = %x\n", hw->fc.current_mode); in igc_setup_link()
153 hw_dbg("Initializing the Flow Control address, type and timer regs\n"); in igc_setup_link()
200 hw_dbg("hw->fc.current_mode = %u\n", hw->fc.current_mode); in igc_force_mac_fc()
218 hw_dbg("Flow control param set incorrectly\n"); in igc_force_mac_fc()
410 hw_dbg("Error configuring flow control\n"); in igc_check_for_copper_link()
467 hw_dbg("Error forcing flow control settings\n"); in igc_config_fc_after_link_up()
491 hw_dbg("Coppe in igc_config_fc_after_link_up()
[all...]
H A Digc_i225.c74 hw_dbg("Driver can't access device - SMBI bit is set.\n"); in igc_get_hw_semaphore_i225()
94 hw_dbg("Driver can't access the NVM\n"); in igc_get_hw_semaphore_i225()
134 hw_dbg("Driver can't access resource, SW_FW_SYNC timeout.\n"); in igc_acquire_swfw_sync_i225()
165 hw_dbg("Failed to release SW_FW_SYNC.\n"); in igc_release_swfw_sync_i225()
238 hw_dbg("nvm parameter(s) out of bounds\n"); in igc_write_nvm_srwr()
259 hw_dbg("Shadow RAM write EEWR timed out\n"); in igc_write_nvm_srwr()
378 hw_dbg("Flash update time out\n"); in igc_update_flash_i225()
387 hw_dbg("Flash update time out\n"); in igc_update_flash_i225()
389 hw_dbg("Flash update complete\n"); in igc_update_flash_i225()
415 hw_dbg("EEPRO in igc_update_nvm_checksum_i225()
[all...]
H A Digc_nvm.c66 hw_dbg("Could not acquire NVM grant\n"); in igc_acquire_nvm()
108 hw_dbg("nvm parameter(s) out of bounds\n"); in igc_read_nvm_eerd()
170 hw_dbg("NVM Read Error\n"); in igc_validate_nvm_checksum()
177 hw_dbg("NVM Checksum Invalid\n"); in igc_validate_nvm_checksum()
203 hw_dbg("NVM Read Error while updating checksum.\n"); in igc_update_nvm_checksum()
211 hw_dbg("NVM Write Error while updating checksum.\n"); in igc_update_nvm_checksum()
H A Digc_base.c29 hw_dbg("PCI-E Master disable polling has failed\n"); in igc_reset_hw_base()
31 hw_dbg("Masking off all interrupts\n"); in igc_reset_hw_base()
42 hw_dbg("Issuing a global reset to MAC\n"); in igc_reset_hw_base()
51 hw_dbg("Auto Read Done did not complete\n"); in igc_reset_hw_base()
180 hw_dbg("Error resetting the PHY\n"); in igc_init_phy_params_base()
292 hw_dbg("Zeroing the MTA\n"); in igc_init_hw_base()
297 hw_dbg("Zeroing the UTA\n"); in igc_init_hw_base()
367 hw_dbg("Queue disable timed out after 10ms\n"); in igc_rx_fifo_flush_base()
/kernel/linux/linux-6.6/drivers/net/ethernet/intel/igb/
H A De1000_mac.c113 hw_dbg("Programming MAC Address into RAR[0]\n"); in igb_init_rx_addrs()
118 hw_dbg("Clearing RAR[1-%u]\n", rar_count-1); in igb_init_rx_addrs()
303 hw_dbg("NVM Read Error\n"); in igb_check_alt_mac_addr()
323 hw_dbg("NVM Read Error\n"); in igb_check_alt_mac_addr()
333 hw_dbg("Ignoring Alternate Mac Address with MC bit set\n"); in igb_check_alt_mac_addr()
509 hw_dbg("Failed to update MTA_REGISTER, too many retries"); in igb_i21x_hw_doublecheck()
662 hw_dbg("Error configuring flow control\n"); in igb_check_for_copper_link()
703 hw_dbg("After fix-ups FlowControl is now = %x\n", hw->fc.current_mode); in igb_setup_link()
715 hw_dbg("Initializing the Flow Control address, type and timer regs\n"); in igb_setup_link()
812 hw_dbg("NV in igb_set_default_fc()
[all...]
H A De1000_nvm.c179 hw_dbg("Could not acquire NVM grant\n"); in igb_acquire_nvm()
286 hw_dbg("SPI NVM Status error\n"); in igb_ready_nvm_eeprom()
318 hw_dbg("nvm parameter(s) out of bounds\n"); in igb_read_nvm_spi()
376 hw_dbg("nvm parameter(s) out of bounds\n"); in igb_read_nvm_eerd()
421 hw_dbg("nvm parameter(s) out of bounds\n"); in igb_write_nvm_spi()
495 hw_dbg("PBA string buffer was null\n"); in igb_read_part_string()
502 hw_dbg("NVM Read Error\n"); in igb_read_part_string()
508 hw_dbg("NVM Read Error\n"); in igb_read_part_string()
517 hw_dbg("NVM PBA number is not stored as string\n"); in igb_read_part_string()
521 hw_dbg("PB in igb_read_part_string()
[all...]
H A De1000_phy.c120 hw_dbg("PHY Address %d is out of range\n", offset); in igb_read_phy_reg_mdic()
146 hw_dbg("MDI Read did not complete\n"); in igb_read_phy_reg_mdic()
151 hw_dbg("MDI Error\n"); in igb_read_phy_reg_mdic()
176 hw_dbg("PHY Address %d is out of range\n", offset); in igb_write_phy_reg_mdic()
203 hw_dbg("MDI Write did not complete\n"); in igb_write_phy_reg_mdic()
208 hw_dbg("MDI Error\n"); in igb_write_phy_reg_mdic()
249 hw_dbg("I2CCMD Read did not complete\n"); in igb_read_phy_reg_i2c()
253 hw_dbg("I2CCMD Error bit set\n"); in igb_read_phy_reg_i2c()
279 hw_dbg("PHY I2C Address %d is out of range.\n", in igb_write_phy_reg_i2c()
306 hw_dbg("I2CCM in igb_write_phy_reg_i2c()
[all...]
H A De1000_i210.c56 hw_dbg("Driver can't access device - SMBI bit is set.\n"); in igb_get_hw_semaphore_i210()
76 hw_dbg("Driver can't access the NVM\n"); in igb_get_hw_semaphore_i210()
142 hw_dbg("Driver can't access resource, SW_FW_SYNC timeout.\n"); in igb_acquire_swfw_sync_i210()
240 hw_dbg("nvm parameter(s) out of bounds\n"); in igb_write_nvm_srwr()
262 hw_dbg("Shadow RAM write EEWR timed out\n"); in igb_write_nvm_srwr()
345 hw_dbg("Read INVM Word 0x%02x = %x\n", in igb_read_invm_word_i210()
353 hw_dbg("Requested word 0x%02x not found in OTP\n", address); in igb_read_invm_word_i210()
380 hw_dbg("MAC Addr not found in iNVM\n"); in igb_read_invm_i210()
430 hw_dbg("NVM word 0x%02x is not mapped.\n", offset); in igb_read_invm_i210()
585 hw_dbg("EEPRO in igb_update_nvm_checksum_i210()
[all...]
H A De1000_82575.c541 hw_dbg("PHY module has not been recognized\n"); in igb_set_sfp_media_type_82575()
768 hw_dbg("PHY Address %u is out of range\n", offset); in igb_read_phy_reg_sgmii_82575()
800 hw_dbg("PHY Address %d is out of range\n", offset); in igb_write_phy_reg_sgmii_82575()
884 hw_dbg("Vendor ID 0x%08X read at address %u\n", in igb_get_phy_id_82575()
892 hw_dbg("PHY address %u was unreadable\n", phy->addr); in igb_get_phy_id_82575()
927 hw_dbg("Soft resetting SGMII attached PHY...\n"); in igb_phy_hw_reset_sgmii_82575()
1184 hw_dbg("Driver can't access resource, SW_FW_SYNC timeout.\n"); in igb_acquire_swfw_sync_82575()
1249 hw_dbg("MNG configuration cycle has not completed.\n"); in igb_get_cfg_done_82575()
1312 hw_dbg("Error configuring flow control\n"); in igb_check_for_link_82575()
1402 hw_dbg("250 in igb_get_pcs_speed_and_duplex_82575()
[all...]
/kernel/linux/linux-5.10/drivers/net/ethernet/intel/igb/
H A De1000_mac.c113 hw_dbg("Programming MAC Address into RAR[0]\n"); in igb_init_rx_addrs()
118 hw_dbg("Clearing RAR[1-%u]\n", rar_count-1); in igb_init_rx_addrs()
303 hw_dbg("NVM Read Error\n"); in igb_check_alt_mac_addr()
323 hw_dbg("NVM Read Error\n"); in igb_check_alt_mac_addr()
333 hw_dbg("Ignoring Alternate Mac Address with MC bit set\n"); in igb_check_alt_mac_addr()
631 hw_dbg("Error configuring flow control\n"); in igb_check_for_copper_link()
672 hw_dbg("After fix-ups FlowControl is now = %x\n", hw->fc.current_mode); in igb_setup_link()
684 hw_dbg("Initializing the Flow Control address, type and timer regs\n"); in igb_setup_link()
781 hw_dbg("NVM Read Error\n"); in igb_set_default_fc()
830 hw_dbg("h in igb_force_mac_fc()
[all...]
H A De1000_nvm.c179 hw_dbg("Could not acquire NVM grant\n"); in igb_acquire_nvm()
286 hw_dbg("SPI NVM Status error\n"); in igb_ready_nvm_eeprom()
318 hw_dbg("nvm parameter(s) out of bounds\n"); in igb_read_nvm_spi()
376 hw_dbg("nvm parameter(s) out of bounds\n"); in igb_read_nvm_eerd()
421 hw_dbg("nvm parameter(s) out of bounds\n"); in igb_write_nvm_spi()
495 hw_dbg("PBA string buffer was null\n"); in igb_read_part_string()
502 hw_dbg("NVM Read Error\n"); in igb_read_part_string()
508 hw_dbg("NVM Read Error\n"); in igb_read_part_string()
517 hw_dbg("NVM PBA number is not stored as string\n"); in igb_read_part_string()
521 hw_dbg("PB in igb_read_part_string()
[all...]
H A De1000_phy.c120 hw_dbg("PHY Address %d is out of range\n", offset); in igb_read_phy_reg_mdic()
146 hw_dbg("MDI Read did not complete\n"); in igb_read_phy_reg_mdic()
151 hw_dbg("MDI Error\n"); in igb_read_phy_reg_mdic()
176 hw_dbg("PHY Address %d is out of range\n", offset); in igb_write_phy_reg_mdic()
203 hw_dbg("MDI Write did not complete\n"); in igb_write_phy_reg_mdic()
208 hw_dbg("MDI Error\n"); in igb_write_phy_reg_mdic()
249 hw_dbg("I2CCMD Read did not complete\n"); in igb_read_phy_reg_i2c()
253 hw_dbg("I2CCMD Error bit set\n"); in igb_read_phy_reg_i2c()
279 hw_dbg("PHY I2C Address %d is out of range.\n", in igb_write_phy_reg_i2c()
306 hw_dbg("I2CCM in igb_write_phy_reg_i2c()
[all...]
H A De1000_i210.c56 hw_dbg("Driver can't access device - SMBI bit is set.\n"); in igb_get_hw_semaphore_i210()
76 hw_dbg("Driver can't access the NVM\n"); in igb_get_hw_semaphore_i210()
142 hw_dbg("Driver can't access resource, SW_FW_SYNC timeout.\n"); in igb_acquire_swfw_sync_i210()
240 hw_dbg("nvm parameter(s) out of bounds\n"); in igb_write_nvm_srwr()
262 hw_dbg("Shadow RAM write EEWR timed out\n"); in igb_write_nvm_srwr()
345 hw_dbg("Read INVM Word 0x%02x = %x\n", in igb_read_invm_word_i210()
353 hw_dbg("Requested word 0x%02x not found in OTP\n", address); in igb_read_invm_word_i210()
380 hw_dbg("MAC Addr not found in iNVM\n"); in igb_read_invm_i210()
430 hw_dbg("NVM word 0x%02x is not mapped.\n", offset); in igb_read_invm_i210()
585 hw_dbg("EEPRO in igb_update_nvm_checksum_i210()
[all...]
H A De1000_82575.c541 hw_dbg("PHY module has not been recognized\n"); in igb_set_sfp_media_type_82575()
768 hw_dbg("PHY Address %u is out of range\n", offset); in igb_read_phy_reg_sgmii_82575()
800 hw_dbg("PHY Address %d is out of range\n", offset); in igb_write_phy_reg_sgmii_82575()
884 hw_dbg("Vendor ID 0x%08X read at address %u\n", in igb_get_phy_id_82575()
892 hw_dbg("PHY address %u was unreadable\n", phy->addr); in igb_get_phy_id_82575()
927 hw_dbg("Soft resetting SGMII attached PHY...\n"); in igb_phy_hw_reset_sgmii_82575()
1184 hw_dbg("Driver can't access resource, SW_FW_SYNC timeout.\n"); in igb_acquire_swfw_sync_82575()
1249 hw_dbg("MNG configuration cycle has not completed.\n"); in igb_get_cfg_done_82575()
1312 hw_dbg("Error configuring flow control\n"); in igb_check_for_link_82575()
1402 hw_dbg("250 in igb_get_pcs_speed_and_duplex_82575()
[all...]
/kernel/linux/linux-5.10/drivers/net/ethernet/intel/ixgbe/
H A Dixgbe_x540.c86 hw_dbg(hw, "semaphore failed with %d", status); in ixgbe_reset_hw_X540()
107 hw_dbg(hw, "Reset polling failed to complete.\n"); in ixgbe_reset_hw_X540()
203 hw_dbg(hw, "Eeprom params: type = %d, size = %d\n", in ixgbe_init_eeprom_params_X540()
326 hw_dbg(hw, "EEPROM read failed\n"); in ixgbe_calc_eeprom_checksum_X540()
341 hw_dbg(hw, "EEPROM read failed\n"); in ixgbe_calc_eeprom_checksum_X540()
351 hw_dbg(hw, "EEPROM read failed\n"); in ixgbe_calc_eeprom_checksum_X540()
362 hw_dbg(hw, "EEPROM read failed\n"); in ixgbe_calc_eeprom_checksum_X540()
395 hw_dbg(hw, "EEPROM read failed\n"); in ixgbe_validate_eeprom_checksum_X540()
420 hw_dbg(hw, "Invalid EEPROM checksum"); in ixgbe_validate_eeprom_checksum_X540()
453 hw_dbg(h in ixgbe_update_eeprom_checksum_X540()
[all...]
H A Dixgbe_common.c101 hw_dbg(hw, "Device %x does not support flow control autoneg\n", in ixgbe_device_supports_autoneg_fc()
125 hw_dbg(hw, "ixgbe_fc_rx_pause not valid in strict IEEE mode\n"); in ixgbe_setup_fc_generic()
216 hw_dbg(hw, "Flow control param set incorrectly\n"); in ixgbe_setup_fc_generic()
233 hw_dbg(hw, "Set up FC; PCS1GLCTL = 0x%08X\n", reg); in ixgbe_setup_fc_generic()
256 hw_dbg(hw, "Set up FC; IXGBE_AUTOC = 0x%08X\n", reg); in ixgbe_setup_fc_generic()
501 hw_dbg(hw, "PBA string buffer was null\n"); in ixgbe_read_pba_string_generic()
507 hw_dbg(hw, "NVM Read Error\n"); in ixgbe_read_pba_string_generic()
513 hw_dbg(hw, "NVM Read Error\n"); in ixgbe_read_pba_string_generic()
523 hw_dbg(hw, "NVM PBA number is not stored as string\n"); in ixgbe_read_pba_string_generic()
527 hw_dbg(h in ixgbe_read_pba_string_generic()
[all...]
/kernel/linux/linux-6.6/drivers/net/ethernet/intel/ixgbe/
H A Dixgbe_x540.c86 hw_dbg(hw, "semaphore failed with %d", status); in ixgbe_reset_hw_X540()
107 hw_dbg(hw, "Reset polling failed to complete.\n"); in ixgbe_reset_hw_X540()
203 hw_dbg(hw, "Eeprom params: type = %d, size = %d\n", in ixgbe_init_eeprom_params_X540()
326 hw_dbg(hw, "EEPROM read failed\n"); in ixgbe_calc_eeprom_checksum_X540()
341 hw_dbg(hw, "EEPROM read failed\n"); in ixgbe_calc_eeprom_checksum_X540()
351 hw_dbg(hw, "EEPROM read failed\n"); in ixgbe_calc_eeprom_checksum_X540()
362 hw_dbg(hw, "EEPROM read failed\n"); in ixgbe_calc_eeprom_checksum_X540()
395 hw_dbg(hw, "EEPROM read failed\n"); in ixgbe_validate_eeprom_checksum_X540()
420 hw_dbg(hw, "Invalid EEPROM checksum"); in ixgbe_validate_eeprom_checksum_X540()
453 hw_dbg(h in ixgbe_update_eeprom_checksum_X540()
[all...]
H A Dixgbe_common.c102 hw_dbg(hw, "Device %x does not support flow control autoneg\n", in ixgbe_device_supports_autoneg_fc()
126 hw_dbg(hw, "ixgbe_fc_rx_pause not valid in strict IEEE mode\n"); in ixgbe_setup_fc_generic()
217 hw_dbg(hw, "Flow control param set incorrectly\n"); in ixgbe_setup_fc_generic()
234 hw_dbg(hw, "Set up FC; PCS1GLCTL = 0x%08X\n", reg); in ixgbe_setup_fc_generic()
257 hw_dbg(hw, "Set up FC; IXGBE_AUTOC = 0x%08X\n", reg); in ixgbe_setup_fc_generic()
502 hw_dbg(hw, "PBA string buffer was null\n"); in ixgbe_read_pba_string_generic()
508 hw_dbg(hw, "NVM Read Error\n"); in ixgbe_read_pba_string_generic()
514 hw_dbg(hw, "NVM Read Error\n"); in ixgbe_read_pba_string_generic()
524 hw_dbg(hw, "NVM PBA number is not stored as string\n"); in ixgbe_read_pba_string_generic()
528 hw_dbg(h in ixgbe_read_pba_string_generic()
[all...]
/kernel/linux/linux-5.10/drivers/net/ethernet/intel/i40e/
H A Di40e_lan_hmc.c115 hw_dbg(hw, "i40e_init_lan_hmc: Tx context: asks for 0x%x but max allowed is 0x%x, returns error %d\n", in i40e_init_lan_hmc()
138 hw_dbg(hw, "i40e_init_lan_hmc: Rx context: asks for 0x%x but max allowed is 0x%x, returns error %d\n", in i40e_init_lan_hmc()
161 hw_dbg(hw, "i40e_init_lan_hmc: FCoE context: asks for 0x%x but max allowed is 0x%x, returns error %d\n", in i40e_init_lan_hmc()
184 hw_dbg(hw, "i40e_init_lan_hmc: FCoE filter: asks for 0x%x but max allowed is 0x%x, returns error %d\n", in i40e_init_lan_hmc()
293 hw_dbg(hw, "i40e_create_lan_hmc_object: bad info ptr\n"); in i40e_create_lan_hmc_object()
298 hw_dbg(hw, "i40e_create_lan_hmc_object: bad hmc_info ptr\n"); in i40e_create_lan_hmc_object()
303 hw_dbg(hw, "i40e_create_lan_hmc_object: bad signature\n"); in i40e_create_lan_hmc_object()
309 hw_dbg(hw, "i40e_create_lan_hmc_object: returns error %d\n", in i40e_create_lan_hmc_object()
316 hw_dbg(hw, "i40e_create_lan_hmc_object: returns error %d\n", in i40e_create_lan_hmc_object()
478 hw_dbg(h in i40e_configure_lan_hmc()
[all...]
/kernel/linux/linux-6.6/drivers/net/ethernet/intel/i40e/
H A Di40e_lan_hmc.c115 hw_dbg(hw, "i40e_init_lan_hmc: Tx context: asks for 0x%x but max allowed is 0x%x, returns error %d\n", in i40e_init_lan_hmc()
138 hw_dbg(hw, "i40e_init_lan_hmc: Rx context: asks for 0x%x but max allowed is 0x%x, returns error %d\n", in i40e_init_lan_hmc()
161 hw_dbg(hw, "i40e_init_lan_hmc: FCoE context: asks for 0x%x but max allowed is 0x%x, returns error %d\n", in i40e_init_lan_hmc()
184 hw_dbg(hw, "i40e_init_lan_hmc: FCoE filter: asks for 0x%x but max allowed is 0x%x, returns error %d\n", in i40e_init_lan_hmc()
293 hw_dbg(hw, "i40e_create_lan_hmc_object: bad info ptr\n"); in i40e_create_lan_hmc_object()
298 hw_dbg(hw, "i40e_create_lan_hmc_object: bad hmc_info ptr\n"); in i40e_create_lan_hmc_object()
303 hw_dbg(hw, "i40e_create_lan_hmc_object: bad signature\n"); in i40e_create_lan_hmc_object()
309 hw_dbg(hw, "i40e_create_lan_hmc_object: returns error %d\n", in i40e_create_lan_hmc_object()
316 hw_dbg(hw, "i40e_create_lan_hmc_object: returns error %d\n", in i40e_create_lan_hmc_object()
478 hw_dbg(h in i40e_configure_lan_hmc()
[all...]

Completed in 24 milliseconds

123