1 /* 2 * linux/arch/arm/mach-omap1/sleep.S 3 * 4 * Low-level OMAP7XX/1510/1610 sleep/wakeUp support 5 * 6 * Initial SA1110 code: 7 * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com> 8 * 9 * Adapted for PXA by Nicolas Pitre: 10 * Copyright (c) 2002 Monta Vista Software, Inc. 11 * 12 * Support for OMAP1510/1610 by Dirk Behme <dirk.behme@de.bosch.com> 13 * 14 * This program is free software; you can redistribute it and/or modify it 15 * under the terms of the GNU General Public License as published by the 16 * Free Software Foundation; either version 2 of the License, or (at your 17 * option) any later version. 18 * 19 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED 20 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 21 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN 22 * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 23 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 24 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF 25 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 26 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 27 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 28 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 29 * 30 * You should have received a copy of the GNU General Public License along 31 * with this program; if not, write to the Free Software Foundation, Inc., 32 * 675 Mass Ave, Cambridge, MA 02139, USA. 33 */ 34 35 #include <linux/linkage.h> 36 37 #include <asm/assembler.h> 38 39 #include "hardware.h" 40 41 #include "iomap.h" 42 #include "pm.h" 43 44 .text 45 46 47 /* 48 * Forces OMAP into deep sleep state 49 * 50 * omapXXXX_cpu_suspend() 51 * 52 * The values of the registers ARM_IDLECT1 and ARM_IDLECT2 are passed 53 * as arg0 and arg1 from caller. arg0 is stored in register r0 and arg1 54 * in register r1. 55 * 56 * Note: This code get's copied to internal SRAM at boot. When the OMAP 57 * wakes up it continues execution at the point it went to sleep. 58 * 59 * Note: Because of errata work arounds we have processor specific functions 60 * here. They are mostly the same, but slightly different. 61 * 62 */ 63 64 #ifdef CONFIG_ARCH_OMAP15XX 65 .align 3 66 ENTRY(omap1510_cpu_suspend) 67 68 @ save registers on stack 69 stmfd sp!, {r0 - r12, lr} 70 71 @ load base address of Traffic Controller 72 mov r4, #TCMIF_ASM_BASE & 0xff000000 73 orr r4, r4, #TCMIF_ASM_BASE & 0x00ff0000 74 orr r4, r4, #TCMIF_ASM_BASE & 0x0000ff00 75 76 @ work around errata of OMAP1510 PDE bit for TC shut down 77 @ clear PDE bit 78 ldr r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff] 79 bic r5, r5, #PDE_BIT & 0xff 80 str r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff] 81 82 @ set PWD_EN bit 83 and r5, r5, #PWD_EN_BIT & 0xff 84 str r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff] 85 86 @ prepare to put SDRAM into self-refresh manually 87 ldr r5, [r4, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] 88 orr r5, r5, #SELF_REFRESH_MODE & 0xff000000 89 orr r5, r5, #SELF_REFRESH_MODE & 0x000000ff 90 str r5, [r4, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] 91 92 @ prepare to put EMIFS to Sleep 93 ldr r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff] 94 orr r5, r5, #IDLE_EMIFS_REQUEST & 0xff 95 str r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff] 96 97 @ load base address of ARM_IDLECT1 and ARM_IDLECT2 98 mov r4, #CLKGEN_REG_ASM_BASE & 0xff000000 99 orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000 100 orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00 101 102 @ turn off clock domains 103 mov r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff 104 orr r5, r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff00 105 strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] 106 107 @ request ARM idle 108 mov r3, #OMAP1510_DEEP_SLEEP_REQUEST & 0xff 109 orr r3, r3, #OMAP1510_DEEP_SLEEP_REQUEST & 0xff00 110 strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] 111 112 mov r5, #IDLE_WAIT_CYCLES & 0xff 113 orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00 114 l_1510_2: 115 subs r5, r5, #1 116 bne l_1510_2 117 /* 118 * Let's wait for the next wake up event to wake us up. r0 can't be 119 * used here because r0 holds ARM_IDLECT1 120 */ 121 mov r2, #0 122 mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt 123 /* 124 * omap1510_cpu_suspend()'s resume point. 125 * 126 * It will just start executing here, so we'll restore stuff from the 127 * stack, reset the ARM_IDLECT1 and ARM_IDLECT2. 128 */ 129 strh r1, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] 130 strh r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] 131 132 @ restore regs and return 133 ldmfd sp!, {r0 - r12, pc} 134 135 ENTRY(omap1510_cpu_suspend_sz) 136 .word . - omap1510_cpu_suspend 137 #endif /* CONFIG_ARCH_OMAP15XX */ 138 139 #if defined(CONFIG_ARCH_OMAP16XX) 140 .align 3 141 ENTRY(omap1610_cpu_suspend) 142 143 @ save registers on stack 144 stmfd sp!, {r0 - r12, lr} 145 146 @ Drain write cache 147 mov r4, #0 148 mcr p15, 0, r0, c7, c10, 4 149 nop 150 151 @ Load base address of Traffic Controller 152 mov r6, #TCMIF_ASM_BASE & 0xff000000 153 orr r6, r6, #TCMIF_ASM_BASE & 0x00ff0000 154 orr r6, r6, #TCMIF_ASM_BASE & 0x0000ff00 155 156 @ Prepare to put SDRAM into self-refresh manually 157 ldr r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] 158 orr r9, r7, #SELF_REFRESH_MODE & 0xff000000 159 orr r9, r9, #SELF_REFRESH_MODE & 0x000000ff 160 str r9, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] 161 162 @ Prepare to put EMIFS to Sleep 163 ldr r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff] 164 orr r9, r8, #IDLE_EMIFS_REQUEST & 0xff 165 str r9, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff] 166 167 @ Load base address of ARM_IDLECT1 and ARM_IDLECT2 168 mov r4, #CLKGEN_REG_ASM_BASE & 0xff000000 169 orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000 170 orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00 171 172 @ Turn off clock domains 173 @ Do not disable PERCK (0x04) 174 mov r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff 175 orr r5, r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff00 176 strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] 177 178 @ Request ARM idle 179 mov r3, #OMAP1610_IDLECT1_SLEEP_VAL & 0xff 180 orr r3, r3, #OMAP1610_IDLECT1_SLEEP_VAL & 0xff00 181 strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] 182 183 /* 184 * Let's wait for the next wake up event to wake us up. r0 can't be 185 * used here because r0 holds ARM_IDLECT1 186 */ 187 mov r2, #0 188 mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt 189 190 @ Errata (HEL3SU467, section 1.4.4) specifies nop-instructions 191 @ according to this formula: 192 @ 2 + (4*DPLL_MULT)/DPLL_DIV/ARMDIV 193 @ Max DPLL_MULT = 18 194 @ DPLL_DIV = 1 195 @ ARMDIV = 1 196 @ => 74 nop-instructions 197 nop 198 nop 199 nop 200 nop 201 nop 202 nop 203 nop 204 nop 205 nop 206 nop @10 207 nop 208 nop 209 nop 210 nop 211 nop 212 nop 213 nop 214 nop 215 nop 216 nop @20 217 nop 218 nop 219 nop 220 nop 221 nop 222 nop 223 nop 224 nop 225 nop 226 nop @30 227 nop 228 nop 229 nop 230 nop 231 nop 232 nop 233 nop 234 nop 235 nop 236 nop @40 237 nop 238 nop 239 nop 240 nop 241 nop 242 nop 243 nop 244 nop 245 nop 246 nop @50 247 nop 248 nop 249 nop 250 nop 251 nop 252 nop 253 nop 254 nop 255 nop 256 nop @60 257 nop 258 nop 259 nop 260 nop 261 nop 262 nop 263 nop 264 nop 265 nop 266 nop @70 267 nop 268 nop 269 nop 270 nop @74 271 /* 272 * omap1610_cpu_suspend()'s resume point. 273 * 274 * It will just start executing here, so we'll restore stuff from the 275 * stack. 276 */ 277 @ Restore the ARM_IDLECT1 and ARM_IDLECT2. 278 strh r1, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] 279 strh r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] 280 281 @ Restore EMIFF controls 282 str r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] 283 str r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff] 284 285 @ Restore regs and return 286 ldmfd sp!, {r0 - r12, pc} 287 288 ENTRY(omap1610_cpu_suspend_sz) 289 .word . - omap1610_cpu_suspend 290 #endif /* CONFIG_ARCH_OMAP16XX */ 291