1 // SPDX-License-Identifier: (GPL-2.0 OR MPL-1.1)
2 /*======================================================================
3
4 A driver for PCMCIA serial devices
5
6 serial_cs.c 1.134 2002/05/04 05:48:53
7
8 The contents of this file are subject to the Mozilla Public
9 License Version 1.1 (the "License"); you may not use this file
10 except in compliance with the License. You may obtain a copy of
11 the License at http://www.mozilla.org/MPL/
12
13 Software distributed under the License is distributed on an "AS
14 IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
15 implied. See the License for the specific language governing
16 rights and limitations under the License.
17
18 The initial developer of the original code is David A. Hinds
19 <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
20 are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
21
22 Alternatively, the contents of this file may be used under the
23 terms of the GNU General Public License version 2 (the "GPL"), in which
24 case the provisions of the GPL are applicable instead of the
25 above. If you wish to allow the use of your version of this file
26 only under the terms of the GPL and not to allow others to use
27 your version of this file under the MPL, indicate your decision
28 by deleting the provisions above and replace them with the notice
29 and other provisions required by the GPL. If you do not delete
30 the provisions above, a recipient may use your version of this
31 file under either the MPL or the GPL.
32
33 ======================================================================*/
34
35 #include <linux/module.h>
36 #include <linux/moduleparam.h>
37 #include <linux/kernel.h>
38 #include <linux/ptrace.h>
39 #include <linux/slab.h>
40 #include <linux/string.h>
41 #include <linux/timer.h>
42 #include <linux/serial_core.h>
43 #include <linux/delay.h>
44 #include <linux/major.h>
45 #include <asm/io.h>
46
47 #include <pcmcia/cistpl.h>
48 #include <pcmcia/ciscode.h>
49 #include <pcmcia/ds.h>
50 #include <pcmcia/cisreg.h>
51
52 #include "8250.h"
53
54
55 /*====================================================================*/
56
57 /* Parameters that can be set with 'insmod' */
58
59 /* Enable the speaker? */
60 static int do_sound = 1;
61 /* Skip strict UART tests? */
62 static int buggy_uart;
63
64 module_param(do_sound, int, 0444);
65 module_param(buggy_uart, int, 0444);
66
67 /*====================================================================*/
68
69 /* Table of multi-port card ID's */
70
71 struct serial_quirk {
72 unsigned int manfid;
73 unsigned int prodid;
74 int multi; /* 1 = multifunction, > 1 = # ports */
75 void (*config)(struct pcmcia_device *);
76 void (*setup)(struct pcmcia_device *, struct uart_8250_port *);
77 void (*wakeup)(struct pcmcia_device *);
78 int (*post)(struct pcmcia_device *);
79 };
80
81 struct serial_info {
82 struct pcmcia_device *p_dev;
83 int ndev;
84 int multi;
85 int slave;
86 int manfid;
87 int prodid;
88 int c950ctrl;
89 int line[4];
90 const struct serial_quirk *quirk;
91 };
92
93 struct serial_cfg_mem {
94 tuple_t tuple;
95 cisparse_t parse;
96 u_char buf[256];
97 };
98
99 /*
100 * vers_1 5.0, "Brain Boxes", "2-Port RS232 card", "r6"
101 * manfid 0x0160, 0x0104
102 * This card appears to have a 14.7456MHz clock.
103 */
104 /* Generic Modem: MD55x (GPRS/EDGE) have
105 * Elan VPU16551 UART with 14.7456MHz oscillator
106 * manfid 0x015D, 0x4C45
107 */
quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_8250_port *uart)108 static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_8250_port *uart)
109 {
110 uart->port.uartclk = 14745600;
111 }
112
quirk_post_ibm(struct pcmcia_device *link)113 static int quirk_post_ibm(struct pcmcia_device *link)
114 {
115 u8 val;
116 int ret;
117
118 ret = pcmcia_read_config_byte(link, 0x800, &val);
119 if (ret)
120 goto failed;
121
122 ret = pcmcia_write_config_byte(link, 0x800, val | 1);
123 if (ret)
124 goto failed;
125 return 0;
126
127 failed:
128 return -ENODEV;
129 }
130
131 /*
132 * Nokia cards are not really multiport cards. Shouldn't this
133 * be handled by setting the quirk entry .multi = 0 | 1 ?
134 */
quirk_config_nokia(struct pcmcia_device *link)135 static void quirk_config_nokia(struct pcmcia_device *link)
136 {
137 struct serial_info *info = link->priv;
138
139 if (info->multi > 1)
140 info->multi = 1;
141 }
142
quirk_wakeup_oxsemi(struct pcmcia_device *link)143 static void quirk_wakeup_oxsemi(struct pcmcia_device *link)
144 {
145 struct serial_info *info = link->priv;
146
147 if (info->c950ctrl)
148 outb(12, info->c950ctrl + 1);
149 }
150
151 /* request_region? oxsemi branch does no request_region too... */
152 /*
153 * This sequence is needed to properly initialize MC45 attached to OXCF950.
154 * I tried decreasing these msleep()s, but it worked properly (survived
155 * 1000 stop/start operations) with these timeouts (or bigger).
156 */
quirk_wakeup_possio_gcc(struct pcmcia_device *link)157 static void quirk_wakeup_possio_gcc(struct pcmcia_device *link)
158 {
159 struct serial_info *info = link->priv;
160 unsigned int ctrl = info->c950ctrl;
161
162 outb(0xA, ctrl + 1);
163 msleep(100);
164 outb(0xE, ctrl + 1);
165 msleep(300);
166 outb(0xC, ctrl + 1);
167 msleep(100);
168 outb(0xE, ctrl + 1);
169 msleep(200);
170 outb(0xF, ctrl + 1);
171 msleep(100);
172 outb(0xE, ctrl + 1);
173 msleep(100);
174 outb(0xC, ctrl + 1);
175 }
176
177 /*
178 * Socket Dual IO: this enables irq's for second port
179 */
quirk_config_socket(struct pcmcia_device *link)180 static void quirk_config_socket(struct pcmcia_device *link)
181 {
182 struct serial_info *info = link->priv;
183
184 if (info->multi)
185 link->config_flags |= CONF_ENABLE_ESR;
186 }
187
188 static const struct serial_quirk quirks[] = {
189 {
190 .manfid = 0x0160,
191 .prodid = 0x0104,
192 .multi = -1,
193 .setup = quirk_setup_brainboxes_0104,
194 }, {
195 .manfid = 0x015D,
196 .prodid = 0x4C45,
197 .multi = -1,
198 .setup = quirk_setup_brainboxes_0104,
199 }, {
200 .manfid = MANFID_IBM,
201 .prodid = ~0,
202 .multi = -1,
203 .post = quirk_post_ibm,
204 }, {
205 .manfid = MANFID_INTEL,
206 .prodid = PRODID_INTEL_DUAL_RS232,
207 .multi = 2,
208 }, {
209 .manfid = MANFID_NATINST,
210 .prodid = PRODID_NATINST_QUAD_RS232,
211 .multi = 4,
212 }, {
213 .manfid = MANFID_NOKIA,
214 .prodid = ~0,
215 .multi = -1,
216 .config = quirk_config_nokia,
217 }, {
218 .manfid = MANFID_OMEGA,
219 .prodid = PRODID_OMEGA_QSP_100,
220 .multi = 4,
221 }, {
222 .manfid = MANFID_OXSEMI,
223 .prodid = ~0,
224 .multi = -1,
225 .wakeup = quirk_wakeup_oxsemi,
226 }, {
227 .manfid = MANFID_POSSIO,
228 .prodid = PRODID_POSSIO_GCC,
229 .multi = -1,
230 .wakeup = quirk_wakeup_possio_gcc,
231 }, {
232 .manfid = MANFID_QUATECH,
233 .prodid = PRODID_QUATECH_DUAL_RS232,
234 .multi = 2,
235 }, {
236 .manfid = MANFID_QUATECH,
237 .prodid = PRODID_QUATECH_DUAL_RS232_D1,
238 .multi = 2,
239 }, {
240 .manfid = MANFID_QUATECH,
241 .prodid = PRODID_QUATECH_DUAL_RS232_G,
242 .multi = 2,
243 }, {
244 .manfid = MANFID_QUATECH,
245 .prodid = PRODID_QUATECH_QUAD_RS232,
246 .multi = 4,
247 }, {
248 .manfid = MANFID_SOCKET,
249 .prodid = PRODID_SOCKET_DUAL_RS232,
250 .multi = 2,
251 .config = quirk_config_socket,
252 }, {
253 .manfid = MANFID_SOCKET,
254 .prodid = ~0,
255 .multi = -1,
256 .config = quirk_config_socket,
257 }
258 };
259
260
261 static int serial_config(struct pcmcia_device *link);
262
263
serial_remove(struct pcmcia_device *link)264 static void serial_remove(struct pcmcia_device *link)
265 {
266 struct serial_info *info = link->priv;
267 int i;
268
269 dev_dbg(&link->dev, "serial_release\n");
270
271 /*
272 * Recheck to see if the device is still configured.
273 */
274 for (i = 0; i < info->ndev; i++)
275 serial8250_unregister_port(info->line[i]);
276
277 if (!info->slave)
278 pcmcia_disable_device(link);
279 }
280
serial_suspend(struct pcmcia_device *link)281 static int serial_suspend(struct pcmcia_device *link)
282 {
283 struct serial_info *info = link->priv;
284 int i;
285
286 for (i = 0; i < info->ndev; i++)
287 serial8250_suspend_port(info->line[i]);
288
289 return 0;
290 }
291
serial_resume(struct pcmcia_device *link)292 static int serial_resume(struct pcmcia_device *link)
293 {
294 struct serial_info *info = link->priv;
295 int i;
296
297 for (i = 0; i < info->ndev; i++)
298 serial8250_resume_port(info->line[i]);
299
300 if (info->quirk && info->quirk->wakeup)
301 info->quirk->wakeup(link);
302
303 return 0;
304 }
305
serial_probe(struct pcmcia_device *link)306 static int serial_probe(struct pcmcia_device *link)
307 {
308 struct serial_info *info;
309 int ret;
310
311 dev_dbg(&link->dev, "serial_attach()\n");
312
313 /* Create new serial device */
314 info = kzalloc(sizeof(*info), GFP_KERNEL);
315 if (!info)
316 return -ENOMEM;
317 info->p_dev = link;
318 link->priv = info;
319
320 link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
321 if (do_sound)
322 link->config_flags |= CONF_ENABLE_SPKR;
323
324 ret = serial_config(link);
325 if (ret)
326 goto free_info;
327
328 return 0;
329
330 free_info:
331 kfree(info);
332 return ret;
333 }
334
serial_detach(struct pcmcia_device *link)335 static void serial_detach(struct pcmcia_device *link)
336 {
337 struct serial_info *info = link->priv;
338
339 dev_dbg(&link->dev, "serial_detach\n");
340
341 /*
342 * Ensure that the ports have been released.
343 */
344 serial_remove(link);
345
346 /* free bits */
347 kfree(info);
348 }
349
350 /*====================================================================*/
351
setup_serial(struct pcmcia_device *handle, struct serial_info *info, unsigned int iobase, int irq)352 static int setup_serial(struct pcmcia_device *handle, struct serial_info *info,
353 unsigned int iobase, int irq)
354 {
355 struct uart_8250_port uart;
356 int line;
357
358 memset(&uart, 0, sizeof(uart));
359 uart.port.iobase = iobase;
360 uart.port.irq = irq;
361 uart.port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
362 uart.port.uartclk = 1843200;
363 uart.port.dev = &handle->dev;
364 if (buggy_uart)
365 uart.port.flags |= UPF_BUGGY_UART;
366
367 if (info->quirk && info->quirk->setup)
368 info->quirk->setup(handle, &uart);
369
370 line = serial8250_register_8250_port(&uart);
371 if (line < 0) {
372 pr_err("serial_cs: serial8250_register_8250_port() at 0x%04lx, irq %d failed\n",
373 (unsigned long)iobase, irq);
374 return -EINVAL;
375 }
376
377 info->line[info->ndev] = line;
378 info->ndev++;
379
380 return 0;
381 }
382
383 /*====================================================================*/
384
pfc_config(struct pcmcia_device *p_dev)385 static int pfc_config(struct pcmcia_device *p_dev)
386 {
387 unsigned int port = 0;
388 struct serial_info *info = p_dev->priv;
389
390 if ((p_dev->resource[1]->end != 0) &&
391 (resource_size(p_dev->resource[1]) == 8)) {
392 port = p_dev->resource[1]->start;
393 info->slave = 1;
394 } else if ((info->manfid == MANFID_OSITECH) &&
395 (resource_size(p_dev->resource[0]) == 0x40)) {
396 port = p_dev->resource[0]->start + 0x28;
397 info->slave = 1;
398 }
399 if (info->slave)
400 return setup_serial(p_dev, info, port, p_dev->irq);
401
402 dev_warn(&p_dev->dev, "no usable port range found, giving up\n");
403 return -ENODEV;
404 }
405
simple_config_check(struct pcmcia_device *p_dev, void *priv_data)406 static int simple_config_check(struct pcmcia_device *p_dev, void *priv_data)
407 {
408 static const int size_table[2] = { 8, 16 };
409 int *try = priv_data;
410
411 if (p_dev->resource[0]->start == 0)
412 return -ENODEV;
413
414 if ((*try & 0x1) == 0)
415 p_dev->io_lines = 16;
416
417 if (p_dev->resource[0]->end != size_table[(*try >> 1)])
418 return -ENODEV;
419
420 p_dev->resource[0]->end = 8;
421 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
422 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
423
424 return pcmcia_request_io(p_dev);
425 }
426
simple_config_check_notpicky(struct pcmcia_device *p_dev, void *priv_data)427 static int simple_config_check_notpicky(struct pcmcia_device *p_dev,
428 void *priv_data)
429 {
430 static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
431 int j;
432
433 if (p_dev->io_lines > 3)
434 return -ENODEV;
435
436 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
437 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
438 p_dev->resource[0]->end = 8;
439
440 for (j = 0; j < 5; j++) {
441 p_dev->resource[0]->start = base[j];
442 p_dev->io_lines = base[j] ? 16 : 3;
443 if (!pcmcia_request_io(p_dev))
444 return 0;
445 }
446 return -ENODEV;
447 }
448
simple_config(struct pcmcia_device *link)449 static int simple_config(struct pcmcia_device *link)
450 {
451 struct serial_info *info = link->priv;
452 int ret, try;
453
454 /*
455 * First pass: look for a config entry that looks normal.
456 * Two tries: without IO aliases, then with aliases.
457 */
458 link->config_flags |= CONF_AUTO_SET_VPP;
459 for (try = 0; try < 4; try++)
460 if (!pcmcia_loop_config(link, simple_config_check, &try))
461 goto found_port;
462
463 /*
464 * Second pass: try to find an entry that isn't picky about
465 * its base address, then try to grab any standard serial port
466 * address, and finally try to get any free port.
467 */
468 if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL))
469 goto found_port;
470
471 dev_warn(&link->dev, "no usable port range found, giving up\n");
472 return -1;
473
474 found_port:
475 if (info->multi && (info->manfid == MANFID_3COM))
476 link->config_index &= ~(0x08);
477
478 /*
479 * Apply any configuration quirks.
480 */
481 if (info->quirk && info->quirk->config)
482 info->quirk->config(link);
483
484 ret = pcmcia_enable_device(link);
485 if (ret != 0)
486 return -1;
487 return setup_serial(link, info, link->resource[0]->start, link->irq);
488 }
489
multi_config_check(struct pcmcia_device *p_dev, void *priv_data)490 static int multi_config_check(struct pcmcia_device *p_dev, void *priv_data)
491 {
492 int *multi = priv_data;
493
494 if (p_dev->resource[1]->end)
495 return -EINVAL;
496
497 /*
498 * The quad port cards have bad CIS's, so just look for a
499 * window larger than 8 ports and assume it will be right.
500 */
501 if (p_dev->resource[0]->end <= 8)
502 return -EINVAL;
503
504 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
505 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
506 p_dev->resource[0]->end = *multi * 8;
507
508 if (pcmcia_request_io(p_dev))
509 return -ENODEV;
510 return 0;
511 }
512
multi_config_check_notpicky(struct pcmcia_device *p_dev, void *priv_data)513 static int multi_config_check_notpicky(struct pcmcia_device *p_dev,
514 void *priv_data)
515 {
516 int *base2 = priv_data;
517
518 if (!p_dev->resource[0]->end || !p_dev->resource[1]->end ||
519 p_dev->resource[0]->start + 8 != p_dev->resource[1]->start)
520 return -ENODEV;
521
522 p_dev->resource[0]->end = p_dev->resource[1]->end = 8;
523 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
524 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
525
526 if (pcmcia_request_io(p_dev))
527 return -ENODEV;
528
529 *base2 = p_dev->resource[0]->start + 8;
530 return 0;
531 }
532
multi_config(struct pcmcia_device *link)533 static int multi_config(struct pcmcia_device *link)
534 {
535 struct serial_info *info = link->priv;
536 int i, base2 = 0;
537
538 /* First, look for a generic full-sized window */
539 if (!pcmcia_loop_config(link, multi_config_check, &info->multi))
540 base2 = link->resource[0]->start + 8;
541 else {
542 /* If that didn't work, look for two windows */
543 info->multi = 2;
544 if (pcmcia_loop_config(link, multi_config_check_notpicky,
545 &base2)) {
546 dev_warn(&link->dev,
547 "no usable port range found, giving up\n");
548 return -ENODEV;
549 }
550 }
551
552 if (!link->irq)
553 dev_warn(&link->dev, "no usable IRQ found, continuing...\n");
554
555 /*
556 * Apply any configuration quirks.
557 */
558 if (info->quirk && info->quirk->config)
559 info->quirk->config(link);
560
561 i = pcmcia_enable_device(link);
562 if (i != 0)
563 return -ENODEV;
564
565 /* The Oxford Semiconductor OXCF950 cards are in fact single-port:
566 * 8 registers are for the UART, the others are extra registers.
567 * Siemen's MC45 PCMCIA (Possio's GCC) is OXCF950 based too.
568 */
569 if (info->manfid == MANFID_OXSEMI || (info->manfid == MANFID_POSSIO &&
570 info->prodid == PRODID_POSSIO_GCC)) {
571 int err;
572
573 if (link->config_index == 1 ||
574 link->config_index == 3) {
575 err = setup_serial(link, info, base2,
576 link->irq);
577 base2 = link->resource[0]->start;
578 } else {
579 err = setup_serial(link, info, link->resource[0]->start,
580 link->irq);
581 }
582 info->c950ctrl = base2;
583
584 /*
585 * FIXME: We really should wake up the port prior to
586 * handing it over to the serial layer.
587 */
588 if (info->quirk && info->quirk->wakeup)
589 info->quirk->wakeup(link);
590
591 return 0;
592 }
593
594 setup_serial(link, info, link->resource[0]->start, link->irq);
595 for (i = 0; i < info->multi - 1; i++)
596 setup_serial(link, info, base2 + (8 * i),
597 link->irq);
598 return 0;
599 }
600
serial_check_for_multi(struct pcmcia_device *p_dev, void *priv_data)601 static int serial_check_for_multi(struct pcmcia_device *p_dev, void *priv_data)
602 {
603 struct serial_info *info = p_dev->priv;
604
605 if (!p_dev->resource[0]->end)
606 return -EINVAL;
607
608 if ((!p_dev->resource[1]->end) && (p_dev->resource[0]->end % 8 == 0))
609 info->multi = p_dev->resource[0]->end >> 3;
610
611 if ((p_dev->resource[1]->end) && (p_dev->resource[0]->end == 8)
612 && (p_dev->resource[1]->end == 8))
613 info->multi = 2;
614
615 return 0; /* break */
616 }
617
618
serial_config(struct pcmcia_device *link)619 static int serial_config(struct pcmcia_device *link)
620 {
621 struct serial_info *info = link->priv;
622 int i;
623
624 dev_dbg(&link->dev, "serial_config\n");
625
626 /* Is this a compliant multifunction card? */
627 info->multi = (link->socket->functions > 1);
628
629 /* Is this a multiport card? */
630 info->manfid = link->manf_id;
631 info->prodid = link->card_id;
632
633 for (i = 0; i < ARRAY_SIZE(quirks); i++)
634 if ((quirks[i].manfid == ~0 ||
635 quirks[i].manfid == info->manfid) &&
636 (quirks[i].prodid == ~0 ||
637 quirks[i].prodid == info->prodid)) {
638 info->quirk = &quirks[i];
639 break;
640 }
641
642 /*
643 * Another check for dual-serial cards: look for either serial or
644 * multifunction cards that ask for appropriate IO port ranges.
645 */
646 if ((info->multi == 0) &&
647 (link->has_func_id) &&
648 (link->socket->pcmcia_pfc == 0) &&
649 ((link->func_id == CISTPL_FUNCID_MULTI) ||
650 (link->func_id == CISTPL_FUNCID_SERIAL))) {
651 if (pcmcia_loop_config(link, serial_check_for_multi, info))
652 goto failed;
653 }
654
655 /*
656 * Apply any multi-port quirk.
657 */
658 if (info->quirk && info->quirk->multi != -1)
659 info->multi = info->quirk->multi;
660
661 dev_info(&link->dev,
662 "trying to set up [0x%04x:0x%04x] (pfc: %d, multi: %d, quirk: %p)\n",
663 link->manf_id, link->card_id,
664 link->socket->pcmcia_pfc, info->multi, info->quirk);
665 if (link->socket->pcmcia_pfc)
666 i = pfc_config(link);
667 else if (info->multi > 1)
668 i = multi_config(link);
669 else
670 i = simple_config(link);
671
672 if (i || info->ndev == 0)
673 goto failed;
674
675 /*
676 * Apply any post-init quirk. FIXME: This should really happen
677 * before we register the port, since it might already be in use.
678 */
679 if (info->quirk && info->quirk->post)
680 if (info->quirk->post(link))
681 goto failed;
682
683 return 0;
684
685 failed:
686 dev_warn(&link->dev, "failed to initialize\n");
687 serial_remove(link);
688 return -ENODEV;
689 }
690
691 static const struct pcmcia_device_id serial_ids[] = {
692 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0057, 0x0021),
693 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0089, 0x110a),
694 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0104, 0x000a),
695 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a),
696 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a),
697 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0xea15),
698 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0109, 0x0501),
699 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0138, 0x110a),
700 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0140, 0x000a),
701 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0x3341),
702 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0xc0ab),
703 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x016c, 0x0081),
704 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x021b, 0x0101),
705 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x08a1, 0xc0ab),
706 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63),
707 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63),
708 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef),
709 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef),
710 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea),
711 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM33", 0x2e3ee845, 0x80609023),
712 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a),
713 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29),
714 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719),
715 PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4),
716 PCMCIA_PFC_DEVICE_PROD_ID12(1, "ATKK", "LM33-PCM-T", 0xba9eb7e2, 0x077c174e),
717 PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff),
718 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c),
719 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae),
720 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033),
721 PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58),
722 PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e),
723 PCMCIA_PFC_DEVICE_PROD_ID12(1, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555),
724 PCMCIA_PFC_DEVICE_PROD_ID12(1, "NEC", "PK-UG-J001", 0x18df0ba0, 0x831b1064),
725 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9),
726 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed),
727 PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc),
728 PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f),
729 PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed),
730 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
731 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0e01),
732 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05),
733 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0b05),
734 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101),
735 PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070),
736 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562),
737 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070),
738 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x016c, 0x0020),
739 PCMCIA_MFC_DEVICE_PROD_ID123(1, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f),
740 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c),
741 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3),
742 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15),
743 PCMCIA_MFC_DEVICE_PROD_ID1(1, "Motorola MARQUIS", 0xf03e4e77),
744 PCMCIA_MFC_DEVICE_PROD_ID2(1, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302),
745 PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0301),
746 PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x0276),
747 PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0039),
748 PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0006),
749 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x0101), /* TDK DF2814 */
750 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x100a), /* Xircom CM-56G */
751 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x3e0a), /* TDK DF5660 */
752 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x410a),
753 PCMCIA_DEVICE_MANF_CARD(0x0107, 0x0002), /* USRobotics 14,400 */
754 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d50),
755 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d51),
756 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d52),
757 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d53),
758 PCMCIA_DEVICE_MANF_CARD(0x010b, 0xd180),
759 PCMCIA_DEVICE_MANF_CARD(0x0115, 0x3330), /* USRobotics/SUN 14,400 */
760 PCMCIA_DEVICE_MANF_CARD(0x0124, 0x0100), /* Nokia DTP-2 ver II */
761 PCMCIA_DEVICE_MANF_CARD(0x0134, 0x5600), /* LASAT COMMUNICATIONS A/S */
762 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x000e),
763 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x001b),
764 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0025),
765 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0045),
766 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0052),
767 PCMCIA_DEVICE_MANF_CARD(0x016c, 0x0006), /* Psion 56K+Fax */
768 PCMCIA_DEVICE_MANF_CARD(0x0200, 0x0001), /* MultiMobile */
769 PCMCIA_DEVICE_PROD_ID134("ADV", "TECH", "COMpad-32/85", 0x67459937, 0x916d02ba, 0x8fbe92ae),
770 PCMCIA_DEVICE_PROD_ID124("GATEWAY2000", "CC3144", "PCMCIA MODEM", 0x506bccae, 0xcb3685f1, 0xbd6c43ef),
771 PCMCIA_DEVICE_PROD_ID14("MEGAHERTZ", "PCMCIA MODEM", 0xf510db04, 0xbd6c43ef),
772 PCMCIA_DEVICE_PROD_ID124("TOSHIBA", "T144PF", "PCMCIA MODEM", 0xb4585a1a, 0x7271409c, 0xbd6c43ef),
773 PCMCIA_DEVICE_PROD_ID123("FUJITSU", "FC14F ", "MBH10213", 0x6ee5a3d8, 0x30ead12b, 0xb00f05a0),
774 PCMCIA_DEVICE_PROD_ID123("Novatel Wireless", "Merlin UMTS Modem", "U630", 0x32607776, 0xd9e73b13, 0xe87332e),
775 PCMCIA_DEVICE_PROD_ID13("MEGAHERTZ", "V.34 PCMCIA MODEM", 0xf510db04, 0xbb2cce4a),
776 PCMCIA_DEVICE_PROD_ID12("Brain Boxes", "Bluetooth PC Card", 0xee138382, 0xd4ce9b02),
777 PCMCIA_DEVICE_PROD_ID12("CIRRUS LOGIC", "FAX MODEM", 0xe625f451, 0xcecd6dfa),
778 PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 28800 FAX/DATA MODEM", 0xa3a3062c, 0x8cbd7c76),
779 PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 33600 FAX/DATA MODEM", 0xa3a3062c, 0x5a00ce95),
780 PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed),
781 PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65),
782 PCMCIA_DEVICE_PROD_ID12("IBM", "ISDN/56K/GSM", 0xb569a6e5, 0xfee5297b),
783 PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6),
784 PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb),
785 PCMCIA_DEVICE_PROD_ID12("Intertex", "IX34-PCMCIA", 0xf8a097e3, 0x97880447),
786 PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f),
787 PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f),
788 PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383),
789 PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e),
790 PCMCIA_DEVICE_PROD_ID12("OEM ", "C288MX ", 0xb572d360, 0xd2385b7a),
791 PCMCIA_DEVICE_PROD_ID12("Option International", "V34bis GSM/PSTN Data/Fax Modem", 0x9d7cd6f5, 0x5cb8bf41),
792 PCMCIA_DEVICE_PROD_ID12("Option International", "GSM-Ready 56K/ISDN", 0x9d7cd6f5, 0xb23844aa),
793 PCMCIA_DEVICE_PROD_ID12("PCMCIA ", "C336MX ", 0x99bcafe9, 0xaa25bcab),
794 PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f),
795 PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "Dual RS-232 Serial Port PC Card", 0xc4420b35, 0x031a380d),
796 PCMCIA_DEVICE_PROD_ID12("Telia", "SurfinBird 560P/A+", 0xe2cdd5e, 0xc9314b38),
797 PCMCIA_DEVICE_PROD_ID1("Smart Serial Port", 0x2d8ce292),
798 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "cis/PCMLM28.cis"),
799 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "cis/PCMLM28.cis"),
800 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"),
801 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"),
802 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"),
803 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "TOSHIBA", "Modem/LAN Card", 0xb4585a1a, 0x53f922f8, "cis/PCMLM28.cis"),
804 PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"),
805 PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"),
806 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "cis/3CCFEM556.cis"),
807 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "cis/DP83903.cis"),
808 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "cis/3CXEM556.cis"),
809 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "cis/3CXEM556.cis"),
810 PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */
811 PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC860", 0xd85f6206, 0x698f93db, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC860 3G Network Adapter R1 */
812 PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC710/AC750", 0xd85f6206, 0x761b11e0, "cis/SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */
813 PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */
814 PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */
815 PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "cis/MT5634ZLX.cis"),
816 PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "cis/COMpad2.cis"),
817 PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "cis/COMpad4.cis"),
818 PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "cis/COMpad2.cis"),
819 PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"),
820 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL100 1.00.", 0x19ca78af, 0xf964f42b),
821 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL100", 0x19ca78af, 0x71d98e83),
822 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL232 1.00.", 0x19ca78af, 0x69fb7490),
823 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.", "SERIAL CARD: SL232", 0x19ca78af, 0xb6bc0235),
824 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.", "SERIAL CARD: CF232", 0x63f2e0bd, 0xb9e175d3),
825 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.", "SERIAL CARD: CF232-5", 0x63f2e0bd, 0xfce33442),
826 PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF232", 0x3beb8cf2, 0x171e7190),
827 PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF232-5", 0x3beb8cf2, 0x20da4262),
828 PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF428", 0x3beb8cf2, 0xea5dd57d),
829 PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: CF500", 0x3beb8cf2, 0xd77255fa),
830 PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: IC232", 0x3beb8cf2, 0x6a709903),
831 PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: SL232", 0x3beb8cf2, 0x18430676),
832 PCMCIA_DEVICE_PROD_ID12("Elan", "Serial Port: XL232", 0x3beb8cf2, 0x6f933767),
833 PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: CF332", 0x3beb8cf2, 0x16dc1ba7),
834 PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: SL332", 0x3beb8cf2, 0x19816c41),
835 PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: SL385", 0x3beb8cf2, 0x64112029),
836 PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4),
837 PCMCIA_MFC_DEVICE_PROD_ID12(0, "Elan", "Serial+Parallel Port: SP230", 0x3beb8cf2, 0xdb9e58bc),
838 PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: CF332", 0x3beb8cf2, 0x16dc1ba7),
839 PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: SL332", 0x3beb8cf2, 0x19816c41),
840 PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: SL385", 0x3beb8cf2, 0x64112029),
841 PCMCIA_MFC_DEVICE_PROD_ID12(1, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4),
842 PCMCIA_MFC_DEVICE_PROD_ID12(2, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4),
843 PCMCIA_MFC_DEVICE_PROD_ID12(3, "Elan", "Serial Port: SL432", 0x3beb8cf2, 0x1cce7ac4),
844 PCMCIA_DEVICE_MANF_CARD(0x0279, 0x950b),
845 /* too generic */
846 /* PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0160, 0x0002), */
847 /* PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0160, 0x0002), */
848 PCMCIA_DEVICE_FUNC_ID(2),
849 PCMCIA_DEVICE_NULL,
850 };
851 MODULE_DEVICE_TABLE(pcmcia, serial_ids);
852
853 MODULE_FIRMWARE("cis/PCMLM28.cis");
854 MODULE_FIRMWARE("cis/DP83903.cis");
855 MODULE_FIRMWARE("cis/3CCFEM556.cis");
856 MODULE_FIRMWARE("cis/3CXEM556.cis");
857 MODULE_FIRMWARE("cis/SW_8xx_SER.cis");
858 MODULE_FIRMWARE("cis/SW_7xx_SER.cis");
859 MODULE_FIRMWARE("cis/SW_555_SER.cis");
860 MODULE_FIRMWARE("cis/MT5634ZLX.cis");
861 MODULE_FIRMWARE("cis/COMpad2.cis");
862 MODULE_FIRMWARE("cis/COMpad4.cis");
863 MODULE_FIRMWARE("cis/RS-COM-2P.cis");
864
865 static struct pcmcia_driver serial_cs_driver = {
866 .owner = THIS_MODULE,
867 .name = "serial_cs",
868 .probe = serial_probe,
869 .remove = serial_detach,
870 .id_table = serial_ids,
871 .suspend = serial_suspend,
872 .resume = serial_resume,
873 };
874 module_pcmcia_driver(serial_cs_driver);
875
876 MODULE_LICENSE("GPL");
877