1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /*
3  *  linux/arch/arm/mm/proc-mohawk.S: MMU functions for Marvell PJ1 core
4  *
5  *  PJ1 (codename Mohawk) is a hybrid of the xscale3 and Marvell's own core.
6  *
7  *  Heavily based on proc-arm926.S and proc-xsc3.S
8  */
9 
10 #include <linux/linkage.h>
11 #include <linux/init.h>
12 #include <linux/pgtable.h>
13 #include <asm/assembler.h>
14 #include <asm/hwcap.h>
15 #include <asm/pgtable-hwdef.h>
16 #include <asm/page.h>
17 #include <asm/ptrace.h>
18 #include "proc-macros.S"
19 
20 /*
21  * This is the maximum size of an area which will be flushed.  If the
22  * area is larger than this, then we flush the whole cache.
23  */
24 #define CACHE_DLIMIT	32768
25 
26 /*
27  * The cache line size of the L1 D cache.
28  */
29 #define CACHE_DLINESIZE	32
30 
31 /*
32  * cpu_mohawk_proc_init()
33  */
34 ENTRY(cpu_mohawk_proc_init)
35 	ret	lr
36 
37 /*
38  * cpu_mohawk_proc_fin()
39  */
40 ENTRY(cpu_mohawk_proc_fin)
41 	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
42 	bic	r0, r0, #0x1800			@ ...iz...........
43 	bic	r0, r0, #0x0006			@ .............ca.
44 	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
45 	ret	lr
46 
47 /*
48  * cpu_mohawk_reset(loc)
49  *
50  * Perform a soft reset of the system.  Put the CPU into the
51  * same state as it would be if it had been reset, and branch
52  * to what would be the reset vector.
53  *
54  * loc: location to jump to for soft reset
55  *
56  * (same as arm926)
57  */
58 	.align	5
59 	.pushsection	.idmap.text, "ax"
60 ENTRY(cpu_mohawk_reset)
61 	mov	ip, #0
62 	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches
63 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
64 	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
65 	mrc	p15, 0, ip, c1, c0, 0		@ ctrl register
66 	bic	ip, ip, #0x0007			@ .............cam
67 	bic	ip, ip, #0x1100			@ ...i...s........
68 	mcr	p15, 0, ip, c1, c0, 0		@ ctrl register
69 	ret	r0
70 ENDPROC(cpu_mohawk_reset)
71 	.popsection
72 
73 /*
74  * cpu_mohawk_do_idle()
75  *
76  * Called with IRQs disabled
77  */
78 	.align	5
79 ENTRY(cpu_mohawk_do_idle)
80 	mov	r0, #0
81 	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
82 	mcr	p15, 0, r0, c7, c0, 4		@ wait for interrupt
83 	ret	lr
84 
85 /*
86  *	flush_icache_all()
87  *
88  *	Unconditionally clean and invalidate the entire icache.
89  */
90 ENTRY(mohawk_flush_icache_all)
91 	mov	r0, #0
92 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
93 	ret	lr
94 ENDPROC(mohawk_flush_icache_all)
95 
96 /*
97  *	flush_user_cache_all()
98  *
99  *	Clean and invalidate all cache entries in a particular
100  *	address space.
101  */
102 ENTRY(mohawk_flush_user_cache_all)
103 	/* FALLTHROUGH */
104 
105 /*
106  *	flush_kern_cache_all()
107  *
108  *	Clean and invalidate the entire cache.
109  */
110 ENTRY(mohawk_flush_kern_cache_all)
111 	mov	r2, #VM_EXEC
112 	mov	ip, #0
113 __flush_whole_cache:
114 	mcr	p15, 0, ip, c7, c14, 0		@ clean & invalidate all D cache
115 	tst	r2, #VM_EXEC
116 	mcrne	p15, 0, ip, c7, c5, 0		@ invalidate I cache
117 	mcrne	p15, 0, ip, c7, c10, 0		@ drain write buffer
118 	ret	lr
119 
120 /*
121  *	flush_user_cache_range(start, end, flags)
122  *
123  *	Clean and invalidate a range of cache entries in the
124  *	specified address range.
125  *
126  *	- start	- start address (inclusive)
127  *	- end	- end address (exclusive)
128  *	- flags	- vm_flags describing address space
129  *
130  * (same as arm926)
131  */
132 ENTRY(mohawk_flush_user_cache_range)
133 	mov	ip, #0
134 	sub	r3, r1, r0			@ calculate total size
135 	cmp	r3, #CACHE_DLIMIT
136 	bgt	__flush_whole_cache
137 1:	tst	r2, #VM_EXEC
138 	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D entry
139 	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate I entry
140 	add	r0, r0, #CACHE_DLINESIZE
141 	mcr	p15, 0, r0, c7, c14, 1		@ clean and invalidate D entry
142 	mcrne	p15, 0, r0, c7, c5, 1		@ invalidate I entry
143 	add	r0, r0, #CACHE_DLINESIZE
144 	cmp	r0, r1
145 	blo	1b
146 	tst	r2, #VM_EXEC
147 	mcrne	p15, 0, ip, c7, c10, 4		@ drain WB
148 	ret	lr
149 
150 /*
151  *	coherent_kern_range(start, end)
152  *
153  *	Ensure coherency between the Icache and the Dcache in the
154  *	region described by start, end.  If you have non-snooping
155  *	Harvard caches, you need to implement this function.
156  *
157  *	- start	- virtual start address
158  *	- end	- virtual end address
159  */
160 ENTRY(mohawk_coherent_kern_range)
161 	/* FALLTHROUGH */
162 
163 /*
164  *	coherent_user_range(start, end)
165  *
166  *	Ensure coherency between the Icache and the Dcache in the
167  *	region described by start, end.  If you have non-snooping
168  *	Harvard caches, you need to implement this function.
169  *
170  *	- start	- virtual start address
171  *	- end	- virtual end address
172  *
173  * (same as arm926)
174  */
175 ENTRY(mohawk_coherent_user_range)
176 	bic	r0, r0, #CACHE_DLINESIZE - 1
177 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
178 	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I entry
179 	add	r0, r0, #CACHE_DLINESIZE
180 	cmp	r0, r1
181 	blo	1b
182 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
183 	mov	r0, #0
184 	ret	lr
185 
186 /*
187  *	flush_kern_dcache_area(void *addr, size_t size)
188  *
189  *	Ensure no D cache aliasing occurs, either with itself or
190  *	the I cache
191  *
192  *	- addr	- kernel address
193  *	- size	- region size
194  */
195 ENTRY(mohawk_flush_kern_dcache_area)
196 	add	r1, r0, r1
197 1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
198 	add	r0, r0, #CACHE_DLINESIZE
199 	cmp	r0, r1
200 	blo	1b
201 	mov	r0, #0
202 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
203 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
204 	ret	lr
205 
206 /*
207  *	dma_inv_range(start, end)
208  *
209  *	Invalidate (discard) the specified virtual address range.
210  *	May not write back any entries.  If 'start' or 'end'
211  *	are not cache line aligned, those lines must be written
212  *	back.
213  *
214  *	- start	- virtual start address
215  *	- end	- virtual end address
216  *
217  * (same as v4wb)
218  */
219 mohawk_dma_inv_range:
220 	tst	r0, #CACHE_DLINESIZE - 1
221 	mcrne	p15, 0, r0, c7, c10, 1		@ clean D entry
222 	tst	r1, #CACHE_DLINESIZE - 1
223 	mcrne	p15, 0, r1, c7, c10, 1		@ clean D entry
224 	bic	r0, r0, #CACHE_DLINESIZE - 1
225 1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
226 	add	r0, r0, #CACHE_DLINESIZE
227 	cmp	r0, r1
228 	blo	1b
229 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
230 	ret	lr
231 
232 /*
233  *	dma_clean_range(start, end)
234  *
235  *	Clean the specified virtual address range.
236  *
237  *	- start	- virtual start address
238  *	- end	- virtual end address
239  *
240  * (same as v4wb)
241  */
242 mohawk_dma_clean_range:
243 	bic	r0, r0, #CACHE_DLINESIZE - 1
244 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
245 	add	r0, r0, #CACHE_DLINESIZE
246 	cmp	r0, r1
247 	blo	1b
248 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
249 	ret	lr
250 
251 /*
252  *	dma_flush_range(start, end)
253  *
254  *	Clean and invalidate the specified virtual address range.
255  *
256  *	- start	- virtual start address
257  *	- end	- virtual end address
258  */
259 ENTRY(mohawk_dma_flush_range)
260 	bic	r0, r0, #CACHE_DLINESIZE - 1
261 1:
262 	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
263 	add	r0, r0, #CACHE_DLINESIZE
264 	cmp	r0, r1
265 	blo	1b
266 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
267 	ret	lr
268 
269 /*
270  *	dma_map_area(start, size, dir)
271  *	- start	- kernel virtual start address
272  *	- size	- size of region
273  *	- dir	- DMA direction
274  */
275 ENTRY(mohawk_dma_map_area)
276 	add	r1, r1, r0
277 	cmp	r2, #DMA_TO_DEVICE
278 	beq	mohawk_dma_clean_range
279 	bcs	mohawk_dma_inv_range
280 	b	mohawk_dma_flush_range
281 ENDPROC(mohawk_dma_map_area)
282 
283 /*
284  *	dma_unmap_area(start, size, dir)
285  *	- start	- kernel virtual start address
286  *	- size	- size of region
287  *	- dir	- DMA direction
288  */
289 ENTRY(mohawk_dma_unmap_area)
290 	ret	lr
291 ENDPROC(mohawk_dma_unmap_area)
292 
293 	.globl	mohawk_flush_kern_cache_louis
294 	.equ	mohawk_flush_kern_cache_louis, mohawk_flush_kern_cache_all
295 
296 	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
297 	define_cache_functions mohawk
298 
299 ENTRY(cpu_mohawk_dcache_clean_area)
300 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
301 	add	r0, r0, #CACHE_DLINESIZE
302 	subs	r1, r1, #CACHE_DLINESIZE
303 	bhi	1b
304 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
305 	ret	lr
306 
307 /*
308  * cpu_mohawk_switch_mm(pgd)
309  *
310  * Set the translation base pointer to be as described by pgd.
311  *
312  * pgd: new page tables
313  */
314 	.align	5
315 ENTRY(cpu_mohawk_switch_mm)
316 	mov	ip, #0
317 	mcr	p15, 0, ip, c7, c14, 0		@ clean & invalidate all D cache
318 	mcr	p15, 0, ip, c7, c5, 0		@ invalidate I cache
319 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
320 	orr	r0, r0, #0x18			@ cache the page table in L2
321 	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
322 	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I & D TLBs
323 	ret	lr
324 
325 /*
326  * cpu_mohawk_set_pte_ext(ptep, pte, ext)
327  *
328  * Set a PTE and flush it out
329  */
330 	.align	5
331 ENTRY(cpu_mohawk_set_pte_ext)
332 #ifdef CONFIG_MMU
333 	armv3_set_pte_ext
334 	mov	r0, r0
335 	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
336 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
337 	ret	lr
338 #endif
339 
340 .globl	cpu_mohawk_suspend_size
341 .equ	cpu_mohawk_suspend_size, 4 * 6
342 #ifdef CONFIG_ARM_CPU_SUSPEND
343 ENTRY(cpu_mohawk_do_suspend)
344 	stmfd	sp!, {r4 - r9, lr}
345 	mrc	p14, 0, r4, c6, c0, 0	@ clock configuration, for turbo mode
346 	mrc	p15, 0, r5, c15, c1, 0	@ CP access reg
347 	mrc	p15, 0, r6, c13, c0, 0	@ PID
348 	mrc 	p15, 0, r7, c3, c0, 0	@ domain ID
349 	mrc	p15, 0, r8, c1, c0, 1	@ auxiliary control reg
350 	mrc 	p15, 0, r9, c1, c0, 0	@ control reg
351 	bic	r4, r4, #2		@ clear frequency change bit
352 	stmia	r0, {r4 - r9}		@ store cp regs
353 	ldmia	sp!, {r4 - r9, pc}
354 ENDPROC(cpu_mohawk_do_suspend)
355 
356 ENTRY(cpu_mohawk_do_resume)
357 	ldmia	r0, {r4 - r9}		@ load cp regs
358 	mov	ip, #0
359 	mcr	p15, 0, ip, c7, c7, 0	@ invalidate I & D caches, BTB
360 	mcr	p15, 0, ip, c7, c10, 4	@ drain write (&fill) buffer
361 	mcr	p15, 0, ip, c7, c5, 4	@ flush prefetch buffer
362 	mcr	p15, 0, ip, c8, c7, 0	@ invalidate I & D TLBs
363 	mcr	p14, 0, r4, c6, c0, 0	@ clock configuration, turbo mode.
364 	mcr	p15, 0, r5, c15, c1, 0	@ CP access reg
365 	mcr	p15, 0, r6, c13, c0, 0	@ PID
366 	mcr	p15, 0, r7, c3, c0, 0	@ domain ID
367 	orr	r1, r1, #0x18		@ cache the page table in L2
368 	mcr	p15, 0, r1, c2, c0, 0	@ translation table base addr
369 	mcr	p15, 0, r8, c1, c0, 1	@ auxiliary control reg
370 	mov	r0, r9			@ control register
371 	b	cpu_resume_mmu
372 ENDPROC(cpu_mohawk_do_resume)
373 #endif
374 
375 	.type	__mohawk_setup, #function
376 __mohawk_setup:
377 	mov	r0, #0
378 	mcr	p15, 0, r0, c7, c7		@ invalidate I,D caches
379 	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
380 	mcr	p15, 0, r0, c8, c7		@ invalidate I,D TLBs
381 	orr	r4, r4, #0x18			@ cache the page table in L2
382 	mcr	p15, 0, r4, c2, c0, 0		@ load page table pointer
383 
384 	mov	r0, #0				@ don't allow CP access
385 	mcr	p15, 0, r0, c15, c1, 0		@ write CP access register
386 
387 	adr	r5, mohawk_crval
388 	ldmia	r5, {r5, r6}
389 	mrc	p15, 0, r0, c1, c0		@ get control register
390 	bic	r0, r0, r5
391 	orr	r0, r0, r6
392 	ret	lr
393 
394 	.size	__mohawk_setup, . - __mohawk_setup
395 
396 	/*
397 	 *  R
398 	 * .RVI ZFRS BLDP WCAM
399 	 * .011 1001 ..00 0101
400 	 *
401 	 */
402 	.type	mohawk_crval, #object
403 mohawk_crval:
404 	crval	clear=0x00007f3f, mmuset=0x00003905, ucset=0x00001134
405 
406 	__INITDATA
407 
408 	@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
409 	define_processor_functions mohawk, dabort=v5t_early_abort, pabort=legacy_pabort
410 
411 	.section ".rodata"
412 
413 	string	cpu_arch_name, "armv5te"
414 	string	cpu_elf_name, "v5"
415 	string	cpu_mohawk_name, "Marvell 88SV331x"
416 
417 	.align
418 
419 	.section ".proc.info.init", "a"
420 
421 	.type	__88sv331x_proc_info,#object
422 __88sv331x_proc_info:
423 	.long	0x56158000			@ Marvell 88SV331x (MOHAWK)
424 	.long	0xfffff000
425 	.long   PMD_TYPE_SECT | \
426 		PMD_SECT_BUFFERABLE | \
427 		PMD_SECT_CACHEABLE | \
428 		PMD_BIT4 | \
429 		PMD_SECT_AP_WRITE | \
430 		PMD_SECT_AP_READ
431 	.long   PMD_TYPE_SECT | \
432 		PMD_BIT4 | \
433 		PMD_SECT_AP_WRITE | \
434 		PMD_SECT_AP_READ
435 	initfn	__mohawk_setup, __88sv331x_proc_info
436 	.long	cpu_arch_name
437 	.long	cpu_elf_name
438 	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
439 	.long	cpu_mohawk_name
440 	.long	mohawk_processor_functions
441 	.long	v4wbi_tlb_fns
442 	.long	v4wb_user_fns
443 	.long	mohawk_cache_fns
444 	.size	__88sv331x_proc_info, . - __88sv331x_proc_info
445