/kernel/linux/linux-5.10/drivers/scsi/ |
H A D | ppa.c | 478 if ((r_str(ppb) & 0x08) == 0x00) in ppa_init() 705 if ((r_str(ppb) & 0x08) == 0x00) in ppa_engine() 883 static u8 cmd[6] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; in device_check()
|
/kernel/linux/linux-5.10/drivers/staging/rtl8192u/ |
H A D | r8192U.h | 140 #define DESC90_RATE1M 0x00 152 #define DESC90_RATEMCS0 0x00 397 #define NUM_OF_PAGE_IN_FW_QUEUE_MGNT 0x00 400 #define NUM_OF_PAGE_IN_FW_QUEUE_PUB 0x00 417 #define RSVD_FW_QUEUE_PAGE_BK_SHIFT 0x00 423 #define RSVD_FW_QUEUE_PAGE_BCN_SHIFT 0x00 447 WIRELESS_MODE_UNKNOWN = 0x00, 786 RESET_TYPE_NORESET = 0x00,
|
/kernel/linux/linux-5.10/sound/soc/codecs/ |
H A D | tas571x.c | 283 val = 0x00; in tas571x_hw_params() 418 { 0x06, 0x00 }, 509 {TAS571X_ERR_STATUS_REG, 0x00}, 513 {TAS571X_SOFT_MUTE_REG, 0x00}, 626 { 0x06, 0x00 }, 683 {TAS571X_DEV_ID_REG, 0x00}, 684 {TAS571X_ERR_STATUS_REG, 0x00}, 688 {TAS571X_SOFT_MUTE_REG, 0x00},
|
/kernel/linux/linux-5.10/net/batman-adv/ |
H A D | soft-interface.c | 190 static const u8 stp_addr[ETH_ALEN] = {0x01, 0x80, 0xC2, 0x00, in batadv_interface_tx() 191 0x00, 0x00}; in batadv_interface_tx() 192 static const u8 ectp_addr[ETH_ALEN] = {0xCF, 0x00, 0x00, 0x00, in batadv_interface_tx() 193 0x00, 0x00}; in batadv_interface_tx()
|
/kernel/linux/linux-5.10/net/atm/ |
H A D | br2684.c | 46 #define SNAP_BRIDGED 0x00, 0x80, 0xc2 47 #define SNAP_ROUTED 0x00, 0x00, 0x00 48 #define PID_ETHERNET 0x00, 0x07 49 #define ETHERTYPE_IPV4 0x08, 0x00 51 #define PAD_BRIDGED 0x00, 0x00
|
/kernel/linux/linux-6.6/drivers/misc/cardreader/ |
H A D | rts5261.c | 75 rtsx_pci_write_register(pcr, pcr->reg_pm_ctrl3, 0x01, 0x00); in rts5261_force_power_down() 115 0x02, 0x00); in rts5261_turn_off_led() 372 RTS5261_EFUSE_ADDR_MASK, 0x00); in rts5261_init_from_hw() 511 rtsx_pci_write_register(pcr, PETXCFG, 0x30, 0x00); in rts5261_extra_init_hw() 532 rtsx_pci_write_register(pcr, pcr->reg_pm_ctrl3, 0x01, 0x00); in rts5261_extra_init_hw() 536 rtsx_pci_write_register(pcr, pcr->reg_pm_ctrl3, D3_DELINK_MODE_EN, 0x00); in rts5261_extra_init_hw() 777 pcr->sd30_drive_sel_1v8 = 0x00; in rts5261_init_params() 778 pcr->sd30_drive_sel_3v3 = 0x00; in rts5261_init_params()
|
/kernel/linux/linux-6.6/drivers/staging/rtl8192u/ |
H A D | r8192U.h | 140 #define DESC90_RATE1M 0x00 152 #define DESC90_RATEMCS0 0x00 397 #define NUM_OF_PAGE_IN_FW_QUEUE_MGNT 0x00 400 #define NUM_OF_PAGE_IN_FW_QUEUE_PUB 0x00 417 #define RSVD_FW_QUEUE_PAGE_BK_SHIFT 0x00 423 #define RSVD_FW_QUEUE_PAGE_BCN_SHIFT 0x00 447 WIRELESS_MODE_UNKNOWN = 0x00, 786 RESET_TYPE_NORESET = 0x00,
|
/kernel/linux/linux-6.6/drivers/scsi/ |
H A D | imm.c | 237 mode = 0x00; in imm_negotiate() 466 w_dtr(ppb, 0x00); in imm_cpp() 1008 static char cmd[6] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; in device_check()
|
H A D | ppa.c | 503 if ((r_str(ppb) & 0x08) == 0x00) in ppa_init() 734 if ((r_str(ppb) & 0x08) == 0x00) in ppa_engine() 911 static u8 cmd[6] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; in device_check()
|
/kernel/linux/linux-6.6/drivers/char/ |
H A D | tlclk.c | 53 #define RESET_ON 0x00 57 #define NORMAL_MODE 0x00 63 #define FILTER_12HZ 0x00 66 #define REF_CLK1_8kHz 0x00 70 #define PRIMARY_CLOCK 0x00 77 #define CLK_1_544MHz 0x00 95 #define HW_DISABLE 0x00 99 #define LOST_CLOCK 0x00
|
/kernel/linux/linux-6.6/drivers/i2c/busses/ |
H A D | i2c-piix4.c | 68 #define PIIX4_QUICK 0x00 413 smb_en = 0x00; in piix4_setup_sb800() 552 if ((temp = inb_p(SMBHSTSTS)) != 0x00) { in piix4_transaction() 556 if ((temp = inb_p(SMBHSTSTS)) != 0x00) { in piix4_transaction() 600 if (inb_p(SMBHSTSTS) != 0x00) in piix4_transaction() 603 if ((temp = inb_p(SMBHSTSTS)) != 0x00) { in piix4_transaction() 725 piix4_imc_write(0x82, 0x00); in piix4_imc_sleep() 751 piix4_imc_write(0x82, 0x00); in piix4_imc_wakeup()
|
/kernel/linux/linux-6.6/sound/soc/codecs/ |
H A D | wcd-clsh-v2.c | 158 0x08, 0x00); /* set to default */ in wcd_clsh_v3_set_buck_mode() 214 0x02, 0x00); in wcd_clsh_v3_buck_ctrl() 324 val = 0x00; in wcd_clsh_v3_set_hph_mode() 389 0x02, 0x00); in wcd_clsh_v3_set_buck_regulator_mode() 406 0x04, 0x00); /* set to Default */ in wcd_clsh_v3_set_flyback_mode() 442 0x20, 0x00); in wcd_clsh_v3_force_iq_ctl() 589 0x00); in wcd_clsh_state_hph_r() 679 0x00); in wcd_clsh_state_hph_l()
|
/kernel/linux/linux-6.6/net/atm/ |
H A D | br2684.c | 46 #define SNAP_BRIDGED 0x00, 0x80, 0xc2 47 #define SNAP_ROUTED 0x00, 0x00, 0x00 48 #define PID_ETHERNET 0x00, 0x07 49 #define ETHERTYPE_IPV4 0x08, 0x00 51 #define PAD_BRIDGED 0x00, 0x00
|
/kernel/linux/linux-6.6/net/batman-adv/ |
H A D | soft-interface.c | 187 static const u8 stp_addr[ETH_ALEN] = {0x01, 0x80, 0xC2, 0x00, in batadv_interface_tx() 188 0x00, 0x00}; in batadv_interface_tx() 189 static const u8 ectp_addr[ETH_ALEN] = {0xCF, 0x00, 0x00, 0x00, in batadv_interface_tx() 190 0x00, 0x00}; in batadv_interface_tx()
|
/third_party/curl/lib/ |
H A D | mqtt.c | 213 pkt[start] = 0x00; in add_client_id() 231 packet[remain_pos + 1] = 0x00; in init_connpack() 243 packet[remain_pos + 9] = 0x00; in init_connpack() 352 result = mqtt_send(data, (char *)"\xe0\x00", 2); in mqtt_disconnect() 406 if(ptr[0] != 0x00 || ptr[1] != 0x00) { in mqtt_verify_connack() 408 0x00, 0x00, ptr[0], ptr[1]); in mqtt_verify_connack() 503 ptr[2] != 0x00) { in mqtt_verify_suback()
|
/third_party/libexif/libexif/huawei/ |
H A D | exif-mnote-data-huawei.c | 37 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
|
/kernel/linux/linux-5.10/drivers/edac/ |
H A D | e752x_edac.c | 289 {0, 0x00}, /* Scrubbing Off */ 291 {SDRATE_EOT, 0x00} /* End of Table */ 298 {0, 0x00}, /* Scrubbing Off */ 301 {SDRATE_EOT, 0x00} /* End of Table */ 1243 pci_write_config_byte(dev, E752X_HI_ERRMASK, 0x00); in e752x_init_error_reporting_regs() 1244 pci_write_config_byte(dev, E752X_HI_SMICMD, 0x00); in e752x_init_error_reporting_regs() 1249 pci_write_config_word(dev, E752X_SYSBUS_SMICMD, 0x00); in e752x_init_error_reporting_regs() 1250 pci_write_config_byte(dev, E752X_BUF_ERRMASK, 0x00); in e752x_init_error_reporting_regs() 1251 pci_write_config_byte(dev, E752X_BUF_SMICMD, 0x00); in e752x_init_error_reporting_regs() 1252 pci_write_config_byte(dev, E752X_DRAM_ERRMASK, 0x00); in e752x_init_error_reporting_regs() [all...] |
/kernel/linux/linux-5.10/drivers/media/dvb-frontends/ |
H A D | tda1004x.c | 35 #define TDA1004X_CHIPID 0x00 216 static u8 bandwidth_6mhz[] = { 0x02, 0x00, 0x3d, 0x00, 0x60, 0x1e, 0xa7, 0x45, 0x4f }; in tda10045h_set_bandwidth() 217 static u8 bandwidth_7mhz[] = { 0x02, 0x00, 0x37, 0x00, 0x4a, 0x2f, 0x6d, 0x76, 0xdb }; in tda10045h_set_bandwidth() 218 static u8 bandwidth_8mhz[] = { 0x02, 0x00, 0x3d, 0x00, 0x48, 0x17, 0x89, 0xc7, 0x14 }; in tda10045h_set_bandwidth() 282 tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x00); in tda10046h_set_bandwidth() 452 tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x00); in tda10046_init_plls() 650 tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x00); // AG in tda10046_init() [all...] |
/kernel/linux/linux-5.10/drivers/target/ |
H A D | target_core_spc.c | 197 buf[off] = 0x00; in spc_emulate_evpd_83() 611 * Note that this is currently set to 0x00 as mkp says it will be in spc_emulate_evpd_b2() 615 buf[4] = 0x00; in spc_emulate_evpd_b2() 670 { .page = 0x00, .emulate = spc_emulate_evpd_00 }, 820 p[3] = (dev->dev_attrib.emulate_rest_reord == 1) ? 0x00 : 0x10; in spc_modesense_control() 858 p[4] = 0x00; in spc_modesense_control() 873 p[5] = (dev->dev_attrib.emulate_tas) ? 0x40 : 0x00; in spc_modesense_control() 934 { .page = 0x01, .subpage = 0x00, .emulate = spc_modesense_rwrecovery }, 935 { .page = 0x08, .subpage = 0x00, .emulate = spc_modesense_caching }, 936 { .page = 0x0a, .subpage = 0x00, [all...] |
/kernel/linux/linux-5.10/drivers/gpu/drm/bridge/ |
H A D | sil-sii8620.h | 18 /* Vendor ID High byte, default value: 0x00 */ 30 /* OTP DBYTE510, default value: 0x00 */ 33 /* System Control #1, default value: 0x00 */ 54 /* Dual link Control, default value: 0x00 */ 76 /* AKSV_1, default value: 0x00 */ 79 /* Video H Resolution #1, default value: 0x00 */ 82 /* Video Mode, default value: 0x00 */ 96 /* I2C Address reassignment, default value: 0x00 */ 101 /* Fast Interrupt Status, default value: 0x00 */ 137 /* Interrupt State, default value: 0x00 */ [all...] |
/kernel/linux/linux-5.10/drivers/media/radio/si4713/ |
H A D | si4713.c | 35 #define DEFAULT_RDS_PI 0x00 36 #define DEFAULT_RDS_PTY 0x00 80 #define POWER_OFF 0x00 268 0x00, in si4713_read_property() 307 0x00, in si4713_write_property() 548 0x00, in si4713_tx_tune_freq() 573 * 1 dB units. A value of 0x00 indicates off. The command 594 0x00, in si4713_tx_tune_power() 595 0x00, in si4713_tx_tune_power() 642 0x00, in si4713_tx_tune_measure() [all...] |
/kernel/linux/linux-5.10/drivers/staging/rtl8188eu/core/ |
H A D | rtw_wlan_util.c | 15 static const u8 ARTHEROS_OUI1[] = {0x00, 0x03, 0x7f}; 16 static const u8 ARTHEROS_OUI2[] = {0x00, 0x13, 0x74}; 18 static const u8 BROADCOM_OUI1[] = {0x00, 0x10, 0x18}; 19 static const u8 BROADCOM_OUI2[] = {0x00, 0x0a, 0xf7}; 21 static const u8 CISCO_OUI[] = {0x00, 0x40, 0x96}; 22 static const u8 MARVELL_OUI[] = {0x00, 0x50, 0x43}; 23 static const u8 RALINK_OUI[] = {0x00, 0x0c, 0x43}; 24 static const u8 REALTEK_OUI[] = {0x00, 0xe0, 0x4c}; 25 static const u8 AIRGOCAP_OUI[] = {0x00, 0x0a, 0xf5}; 26 static const u8 EPIGRAM_OUI[] = {0x00, [all...] |
/kernel/linux/linux-6.6/drivers/media/radio/si4713/ |
H A D | si4713.c | 35 #define DEFAULT_RDS_PI 0x00 36 #define DEFAULT_RDS_PTY 0x00 80 #define POWER_OFF 0x00 268 0x00, in si4713_read_property() 307 0x00, in si4713_write_property() 548 0x00, in si4713_tx_tune_freq() 573 * 1 dB units. A value of 0x00 indicates off. The command 594 0x00, in si4713_tx_tune_power() 595 0x00, in si4713_tx_tune_power() 642 0x00, in si4713_tx_tune_measure() [all...] |
/kernel/linux/linux-6.6/drivers/edac/ |
H A D | e752x_edac.c | 289 {0, 0x00}, /* Scrubbing Off */ 291 {SDRATE_EOT, 0x00} /* End of Table */ 298 {0, 0x00}, /* Scrubbing Off */ 301 {SDRATE_EOT, 0x00} /* End of Table */ 1242 pci_write_config_byte(dev, E752X_HI_ERRMASK, 0x00); in e752x_init_error_reporting_regs() 1243 pci_write_config_byte(dev, E752X_HI_SMICMD, 0x00); in e752x_init_error_reporting_regs() 1248 pci_write_config_word(dev, E752X_SYSBUS_SMICMD, 0x00); in e752x_init_error_reporting_regs() 1249 pci_write_config_byte(dev, E752X_BUF_ERRMASK, 0x00); in e752x_init_error_reporting_regs() 1250 pci_write_config_byte(dev, E752X_BUF_SMICMD, 0x00); in e752x_init_error_reporting_regs() 1251 pci_write_config_byte(dev, E752X_DRAM_ERRMASK, 0x00); in e752x_init_error_reporting_regs() [all...] |
/kernel/linux/linux-6.6/drivers/media/dvb-frontends/ |
H A D | tda1004x.c | 35 #define TDA1004X_CHIPID 0x00 216 static u8 bandwidth_6mhz[] = { 0x02, 0x00, 0x3d, 0x00, 0x60, 0x1e, 0xa7, 0x45, 0x4f }; in tda10045h_set_bandwidth() 217 static u8 bandwidth_7mhz[] = { 0x02, 0x00, 0x37, 0x00, 0x4a, 0x2f, 0x6d, 0x76, 0xdb }; in tda10045h_set_bandwidth() 218 static u8 bandwidth_8mhz[] = { 0x02, 0x00, 0x3d, 0x00, 0x48, 0x17, 0x89, 0xc7, 0x14 }; in tda10045h_set_bandwidth() 282 tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x00); in tda10046h_set_bandwidth() 452 tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x00); in tda10046_init_plls() 650 tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x00); // AG in tda10046_init() [all...] |