| /kernel/linux/linux-6.6/drivers/media/i2c/ |
| H A D | tvaudio.c | 396 #define TDA9840_SW 0x00
484 #define TDA9855_VR 0x00 /* Volume, right */
502 /* 0x00 - VR in TDA9855 */
525 * set to values of 0x00 through 0x0f for Ster1 through Ster16 */
542 * set to values of 0x00 through 0x0f for SAP1 through SAP16 */
570 * from 0x00 to 0x1f - nominal at 0x0f and 0x10 (read/write) */
635 #define TDA9873_SW 0x00 /* Switching */
639 /* Subaddress 0x00: Switching Data
829 #define TDA9874A_AGCGR 0x00 /* AGC gain */
857 #define TDA9874A_DSR 0x00 /* devic
[all...] |
| /kernel/linux/linux-5.10/drivers/phy/rockchip/ |
| H A D | phy-rockchip-inno-hdmi.c | 26 /* REG: 0x00 */
336 0xaa, 0x00, 0x44, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00,
337 0x00, 0x00, 0x00,
[all...] |
| /kernel/linux/linux-5.10/drivers/scsi/esas2r/ |
| H A D | atvda.h | 78 #define VDA_FUNC_SCSI 0x00
92 #define RS_SUCCESS 0x00 /*! successful completion */
111 #define RS_SCAN_FAIL (RS_MGT_BASE + 0x00)
146 #define RS_FLS_ERR_AREA (RS_FLS_BASE + 0x00)
170 #define VDA_FLASH_BEGINW 0x00
185 #define VDA_IOCTL_HBA 0x00
200 #define VDADEVSTAT_INVALID 0x00
218 #define VDAMBRSTATE_ONLINE 0x00
226 #define VDAOP_NONE 0x00
239 #define VDAOPSTAT_OK 0x00
[all...] |
| /kernel/linux/linux-6.6/drivers/phy/rockchip/ |
| H A D | phy-rockchip-inno-hdmi.c | 25 /* REG: 0x00 */
484 0xaa, 0x00, 0x44, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00,
485 0x00, 0x00, 0x00,
[all...] |
| /kernel/linux/linux-6.6/drivers/scsi/esas2r/ |
| H A D | atvda.h | 78 #define VDA_FUNC_SCSI 0x00
92 #define RS_SUCCESS 0x00 /*! successful completion */
111 #define RS_SCAN_FAIL (RS_MGT_BASE + 0x00)
146 #define RS_FLS_ERR_AREA (RS_FLS_BASE + 0x00)
170 #define VDA_FLASH_BEGINW 0x00
185 #define VDA_IOCTL_HBA 0x00
200 #define VDADEVSTAT_INVALID 0x00
218 #define VDAMBRSTATE_ONLINE 0x00
226 #define VDAOP_NONE 0x00
239 #define VDAOPSTAT_OK 0x00
[all...] |
| /kernel/linux/linux-5.10/drivers/media/tuners/ |
| H A D | tda18250.c | 25 ret = regmap_write_bits(dev->regmap, R06_POWER2, 0x07, 0x00); in tda18250_power_control()
43 R10_LT1, 0x80, 0x00); in tda18250_power_control()
138 { R1A_AGCK, 0x00 }, in tda18250_init()
142 { R21_IF_AGC, 0x00 }, in tda18250_init()
147 { R31_IRQ_CTRL, 0x00 }, in tda18250_init()
148 { R39_SD5, 0x00 }, in tda18250_init()
161 { R5C_AGC_DEBUG, 0x00 }, in tda18250_init()
167 [TDA18250_XTAL_FREQ_16MHZ] = { 0x3e, 0x80, 0x50, 0x00, 0x20 }, in tda18250_init()
168 [TDA18250_XTAL_FREQ_24MHZ] = { 0x5d, 0xc0, 0xec, 0x00, 0x18 }, in tda18250_init()
171 [TDA18250_XTAL_FREQ_30MHZ] = { 0x75, 0x30, 0x8f, 0x00, in tda18250_init()
[all...] |
| /kernel/linux/linux-6.6/drivers/media/tuners/ |
| H A D | tda18250.c | 25 ret = regmap_write_bits(dev->regmap, R06_POWER2, 0x07, 0x00); in tda18250_power_control()
43 R10_LT1, 0x80, 0x00); in tda18250_power_control()
138 { R1A_AGCK, 0x00 }, in tda18250_init()
142 { R21_IF_AGC, 0x00 }, in tda18250_init()
147 { R31_IRQ_CTRL, 0x00 }, in tda18250_init()
148 { R39_SD5, 0x00 }, in tda18250_init()
161 { R5C_AGC_DEBUG, 0x00 }, in tda18250_init()
167 [TDA18250_XTAL_FREQ_16MHZ] = { 0x3e, 0x80, 0x50, 0x00, 0x20 }, in tda18250_init()
168 [TDA18250_XTAL_FREQ_24MHZ] = { 0x5d, 0xc0, 0xec, 0x00, 0x18 }, in tda18250_init()
171 [TDA18250_XTAL_FREQ_30MHZ] = { 0x75, 0x30, 0x8f, 0x00, in tda18250_init()
[all...] |
| /kernel/linux/linux-6.6/drivers/hid/ |
| H A D | hid-logitech-dj.c | 45 #define CMD_SWITCH_PARAM_DEVBITFIELD 0x00
47 #define TIMEOUT_NO_KEEPALIVE 0x00
56 #define DEVICE_PAIRED_PARAM_SPFUNCTION 0x00
66 #define CONNECTION_STATUS_PARAM_STATUS 0x00
71 #define NOTIF_ERROR_PARAM_ETYPE 0x00
95 #define HIDPP_PARAM_PROTO_TYPE 0x00
185 0x15, 0x00, /* LOGICAL_MINIMUM (0) */
193 0x15, 0x00, /* LOGICAL_MINIMUM (0) */
194 0x26, 0xFF, 0x00, /* LOGICAL_MAXIMUM (255) */
196 0x19, 0x00, /* USAGE_MINIMU
[all...] |
| /kernel/linux/linux-5.10/drivers/clk/sunxi-ng/ |
| H A D | ccu-sun9i-a80-de.c | 20 0x00, BIT(0), 0);
22 0x00, BIT(1), 0);
24 0x00, BIT(2), 0);
26 0x00, BIT(4), 0);
28 0x00, BIT(5), 0);
30 0x00, BIT(8), 0);
32 0x00, BIT(9), 0);
34 0x00, BIT(10), 0);
36 0x00, BIT(12), 0);
38 0x00, BI
[all...] |
| /kernel/linux/linux-5.10/arch/sparc/lib/ |
| H A D | bzero.S | 33 1: stb %o2, [%o0 + 0x00]
40 stw %o2, [%o0 + 0x00]
54 stx %o2, [%o0 + 0x00]
67 5: stx %o2, [%o0 + 0x00]
74 1: stb %o2, [%o0 + 0x00]
98 EX_ST(prefetcha [%o0 + 0x00] %asi, #n_writes)
101 1: EX_ST(stba %g0, [%o0 + 0x00] %asi)
108 EX_ST(stwa %g0, [%o0 + 0x00] %asi)
122 EX_ST(stxa %g0, [%o0 + 0x00] %asi)
135 5: EX_ST(stxa %g0, [%o0 + 0x00]
[all...] |
| /kernel/linux/linux-6.6/arch/sparc/lib/ |
| H A D | bzero.S | 33 1: stb %o2, [%o0 + 0x00]
40 stw %o2, [%o0 + 0x00]
54 stx %o2, [%o0 + 0x00]
67 5: stx %o2, [%o0 + 0x00]
74 1: stb %o2, [%o0 + 0x00]
98 EX_ST(prefetcha [%o0 + 0x00] %asi, #n_writes)
101 1: EX_ST(stba %g0, [%o0 + 0x00] %asi)
108 EX_ST(stwa %g0, [%o0 + 0x00] %asi)
122 EX_ST(stxa %g0, [%o0 + 0x00] %asi)
135 5: EX_ST(stxa %g0, [%o0 + 0x00]
[all...] |
| /kernel/linux/linux-5.10/drivers/input/mouse/ |
| H A D | byd.c | 197 #define BYD_PACKET_RELATIVE 0x00
362 { 0x10E2, 0x00 }, in byd_reset_touchpad()
373 { BYD_CMD_SET_PALM_CHECK, 0x00 }, in byd_reset_touchpad()
377 { BYD_CMD_SET_LEFT_EDGE_REGION, 0x00 }, in byd_reset_touchpad()
378 { BYD_CMD_SET_TOP_EDGE_REGION, 0x00 }, in byd_reset_touchpad()
379 { BYD_CMD_SET_RIGHT_EDGE_REGION, 0x00 }, in byd_reset_touchpad()
380 { BYD_CMD_SET_BOTTOM_EDGE_REGION, 0x00 }, in byd_reset_touchpad()
383 { 0x10E0, 0x00 }, in byd_reset_touchpad()
438 u8 param[4] = {0x03, 0x00, 0x00, in byd_detect()
[all...] |
| /kernel/linux/linux-5.10/drivers/iio/light/ |
| H A D | jsa1212.c | 55 #define JSA1212_CONF_PXS_DISABLE 0x00
58 #define JSA1212_CONF_ALS_DISABLE 0x00
62 #define JSA1212_CONF_IRDR_100MA 0x00
71 #define JSA1212_CONF_PXS_SLP_800MS 0x00
75 #define JSA1212_INT_CTRL_EITHER 0x00
78 #define JSA1212_INT_ALS_PRST_1CONV 0x00
83 #define JSA1212_INT_ALS_FLAG_CLR 0x00
85 #define JSA1212_INT_PXS_PRST_1CONV 0x00
90 #define JSA1212_INT_PXS_FLAG_CLR 0x00
93 #define JSA1212_ALS_RNG_0_2048 0x00
[all...] |
| /kernel/linux/linux-5.10/drivers/video/fbdev/via/ |
| H A D | via_clock.c | 47 via_write_reg_mask(VIASR, 0x40, 0x00, 0x02); /* disable reset */ in cle266_set_primary_pll_encoded()
56 via_write_reg_mask(VIASR, 0x40, 0x00, 0x02); /* disable reset */ in k800_set_primary_pll_encoded()
64 via_write_reg_mask(VIASR, 0x40, 0x00, 0x04); /* disable reset */ in cle266_set_secondary_pll_encoded()
73 via_write_reg_mask(VIASR, 0x40, 0x00, 0x04); /* disable reset */ in k800_set_secondary_pll_encoded()
82 via_write_reg_mask(VIASR, 0x40, 0x00, 0x01); /* disable reset */ in set_engine_pll_encoded()
134 value = 0x00; in set_primary_pll_state()
152 value = 0x00; in set_secondary_pll_state()
170 value = 0x00; in set_engine_pll_state()
188 value = 0x00; in set_primary_clock_state()
206 value = 0x00; in set_secondary_clock_state()
[all...] |
| /kernel/linux/linux-6.6/drivers/video/fbdev/via/ |
| H A D | via_clock.c | 47 via_write_reg_mask(VIASR, 0x40, 0x00, 0x02); /* disable reset */ in cle266_set_primary_pll_encoded()
56 via_write_reg_mask(VIASR, 0x40, 0x00, 0x02); /* disable reset */ in k800_set_primary_pll_encoded()
64 via_write_reg_mask(VIASR, 0x40, 0x00, 0x04); /* disable reset */ in cle266_set_secondary_pll_encoded()
73 via_write_reg_mask(VIASR, 0x40, 0x00, 0x04); /* disable reset */ in k800_set_secondary_pll_encoded()
82 via_write_reg_mask(VIASR, 0x40, 0x00, 0x01); /* disable reset */ in set_engine_pll_encoded()
134 value = 0x00; in set_primary_pll_state()
152 value = 0x00; in set_secondary_pll_state()
170 value = 0x00; in set_engine_pll_state()
188 value = 0x00; in set_primary_clock_state()
206 value = 0x00; in set_secondary_clock_state()
[all...] |
| /kernel/linux/linux-6.6/drivers/clk/sunxi-ng/ |
| H A D | ccu-sun9i-a80-de.c | 20 0x00, BIT(0), 0);
22 0x00, BIT(1), 0);
24 0x00, BIT(2), 0);
26 0x00, BIT(4), 0);
28 0x00, BIT(5), 0);
30 0x00, BIT(8), 0);
32 0x00, BIT(9), 0);
34 0x00, BIT(10), 0);
36 0x00, BIT(12), 0);
38 0x00, BI
[all...] |
| /kernel/linux/linux-6.6/drivers/iio/light/ |
| H A D | jsa1212.c | 55 #define JSA1212_CONF_PXS_DISABLE 0x00
58 #define JSA1212_CONF_ALS_DISABLE 0x00
62 #define JSA1212_CONF_IRDR_100MA 0x00
71 #define JSA1212_CONF_PXS_SLP_800MS 0x00
75 #define JSA1212_INT_CTRL_EITHER 0x00
78 #define JSA1212_INT_ALS_PRST_1CONV 0x00
83 #define JSA1212_INT_ALS_FLAG_CLR 0x00
85 #define JSA1212_INT_PXS_PRST_1CONV 0x00
90 #define JSA1212_INT_PXS_FLAG_CLR 0x00
93 #define JSA1212_ALS_RNG_0_2048 0x00
[all...] |
| /kernel/linux/linux-6.6/drivers/input/mouse/ |
| H A D | byd.c | 197 #define BYD_PACKET_RELATIVE 0x00
362 { 0x10E2, 0x00 }, in byd_reset_touchpad()
373 { BYD_CMD_SET_PALM_CHECK, 0x00 }, in byd_reset_touchpad()
377 { BYD_CMD_SET_LEFT_EDGE_REGION, 0x00 }, in byd_reset_touchpad()
378 { BYD_CMD_SET_TOP_EDGE_REGION, 0x00 }, in byd_reset_touchpad()
379 { BYD_CMD_SET_RIGHT_EDGE_REGION, 0x00 }, in byd_reset_touchpad()
380 { BYD_CMD_SET_BOTTOM_EDGE_REGION, 0x00 }, in byd_reset_touchpad()
383 { 0x10E0, 0x00 }, in byd_reset_touchpad()
438 u8 param[4] = {0x03, 0x00, 0x00, in byd_detect()
[all...] |
| /kernel/linux/linux-5.10/arch/sparc/include/uapi/asm/ |
| H A D | apc.h | 17 #define APCIOCGFANCTL _IOR(APC_IOC, 0x00, int) /* Get fan speed */
29 #define APC_IDLE_REG 0x00
45 #define APC_FANCTL_HI 0x00 /* Fan speed high */
51 #define APC_CPOWER_ON 0x00 /* Conv power on */
|
| /kernel/linux/linux-5.10/drivers/mtd/nand/raw/ |
| H A D | nand_amd.c | 26 if (chip->id.data[4] != 0x00 && chip->id.data[5] == 0x00 && in amd_nand_decode_id()
27 chip->id.data[6] == 0x00 && chip->id.data[7] == 0x00 && in amd_nand_decode_id()
|
| /kernel/linux/linux-6.6/arch/arm64/kernel/ |
| H A D | sigreturn32.S | 26 .byte __NR_compat_sigreturn, 0x00, 0x00, 0xef // svc #__NR_compat_sigreturn
38 .byte __NR_compat_rt_sigreturn, 0x00, 0x00, 0xef // svc #__NR_compat_rt_sigreturn
|
| /kernel/linux/linux-6.6/arch/sparc/include/uapi/asm/ |
| H A D | apc.h | 17 #define APCIOCGFANCTL _IOR(APC_IOC, 0x00, int) /* Get fan speed */
29 #define APC_IDLE_REG 0x00
45 #define APC_FANCTL_HI 0x00 /* Fan speed high */
51 #define APC_CPOWER_ON 0x00 /* Conv power on */
|
| /kernel/linux/linux-6.6/drivers/mtd/nand/raw/ |
| H A D | nand_amd.c | 26 if (chip->id.data[4] != 0x00 && chip->id.data[5] == 0x00 && in amd_nand_decode_id()
27 chip->id.data[6] == 0x00 && chip->id.data[7] == 0x00 && in amd_nand_decode_id()
|
| /kernel/linux/linux-6.6/drivers/i3c/master/mipi-i3c-hci/ |
| H A D | xfer_mode_rate.h | 22 #define XFERMODE_IDX_I3C_SDR 0x00 /* I3C SDR Mode */
48 #define XFERRATE_I3C_SDR0 0x00 /* 12.5 MHz */
57 #define XFERRATE_I2C_FM 0x00 /* 400 KHz */
69 #define XFERRATE_MODE_I3C 0x00
|
| /third_party/ffmpeg/libavcodec/ |
| H A D | a64colors.h | 34 {0x00, 0x00, 0x00},
43 {0x43, 0x39, 0x00},
|