| /kernel/linux/linux-6.6/drivers/net/wireless/broadcom/brcm80211/brcmfmac/ |
| H A D | sdio.c | 560 /* SDIO Pad drive strength to select value mappings */
563 u8 sel; /* Chip-specific select value */
566 /* SDIO Drive Strength to sel value table for PMU Rev 11 (1.8V) */
578 /* SDIO Drive Strength to sel value table for PMU Rev 13 (1.8v) */
589 /* SDIO Drive Strength to sel value table for PMU Rev 17 (1.8v) */
596 /* SDIO Drive Strength to sel value table for 43143 PMU Rev 17 (3.3V) */
746 * read it back until it matches written value in brcmf_sdio_kso_control()
2184 * Return: negative value if there is error
2883 /* Protect against corrupt value */ in brcmf_sdio_readconsole()
3532 u32 value; in brcmf_sdio_bus_preinit() local
[all...] |
| /kernel/linux/linux-6.6/drivers/net/wireless/marvell/ |
| H A D | mwl8k.c | 3019 u8 value; member
3027 u8 *value) in mwl8k_cmd_bbp_reg_access()
3044 *value = cmd->value; in mwl8k_cmd_bbp_reg_access()
3046 *value = 0; in mwl8k_cmd_bbp_reg_access()
5319 static int mwl8k_set_rts_threshold(struct ieee80211_hw *hw, u32 value) in mwl8k_set_rts_threshold() argument
5321 return mwl8k_cmd_set_rts_threshold(hw, value); in mwl8k_set_rts_threshold()
3024 mwl8k_cmd_bbp_reg_access(struct ieee80211_hw *hw, u16 action, u16 offset, u8 *value) mwl8k_cmd_bbp_reg_access() argument
|
| /kernel/linux/linux-6.6/tools/power/x86/turbostat/ |
| H A D | turbostat.c | 443 /*The accumulated MSR value is updated by the timer */
758 * set the approprate bit in return value.
2620 * [7:1] -- Base value of number of active cores of bucket 1. in dump_knl_turbo_ratio_limits()
2621 * [15:8] -- Base value of freq ratio of bucket 1. in dump_knl_turbo_ratio_limits()
2834 int value; in parse_int_file() local
2842 if (fscanf(filep, "%d", &value) != 1) in parse_int_file()
2845 return value; in parse_int_file()
5254 * below this value, including the Digital Thermal Sensor (DTS),
5474 int value; in print_dev_latency() local
5483 retval = read(fd, (void *)&value, sizeo in print_dev_latency()
[all...] |
| /kernel/linux/linux-6.6/kernel/trace/ |
| H A D | ftrace.c | 1938 * the return value to the caller and eventually to the owner of the DIRECT
2258 /* Save off if rec is being enabled (for return value) */ in ftrace_check_record()
4706 * ftrace_func_mapper_find_ip(), then the return value may be meaningless,
5554 /* Prevent store tearing if a trampoline concurrently accesses the value */ in __modify_ftrace_direct()
6619 unsigned long *value, char *type, in ftrace_get_trampoline_kallsym()
6628 *value = op->trampoline; in ftrace_get_trampoline_kallsym()
7022 int ftrace_mod_get_kallsym(unsigned int symnum, unsigned long *value, in ftrace_mod_get_kallsym() argument
7044 *value = mod_func->ip; in ftrace_mod_get_kallsym()
7055 ret = ftrace_get_trampoline_kallsym(symnum, value, type, name, in ftrace_mod_get_kallsym()
7070 int ftrace_mod_get_kallsym(unsigned int symnum, unsigned long *value, in ftrace_mod_get_kallsym() argument
6618 ftrace_get_trampoline_kallsym(unsigned int symnum, unsigned long *value, char *type, char *name, char *module_name, int *exported) ftrace_get_trampoline_kallsym() argument
[all...] |
| /kernel/linux/linux-6.6/drivers/scsi/lpfc/ |
| H A D | lpfc_init.c | 118 * Any other value - indicates an error.
194 * The value of rr must be 1 since the driver set the cv field to 1. in lpfc_config_port_prep()
413 * Any other value - error.
733 * Any other value - error
754 * Any other value - error
838 * Any other value - error
880 * Any other value - error.
1062 * Any other value - error.
1081 * Any other value - error.
1172 * Any other value
5603 u32 value; lpfc_cgn_update_stat() local
5684 uint16_t value, mvalue; lpfc_cmf_stats_timer() local
[all...] |
| /applications/standard/calendardata/calendarmanager/napi/src/ |
| H A D | calendar_napi.cpp | 390 LOG_DEBUG("account.displayName:%{private}s", account.displayName.value().c_str()); in GetAccount()
|
| /drivers/hdf_core/framework/model/storage/include/mmc/ |
| H A D | mmc_protocol.h | 373 uint32_t taccNs; /* data read access-time-1(TAAC)[119:112]: time unit[2:0] * time value[6:3] */
376 uint32_t maxDtr; /* max data transfer rate[103:96]: transfer rate unit[2:0] * time value[6:3] */
548 * Max register value defined is 0x17 which equals 838.86ms timeout. Values between 0x18 and 0xFF are reserved.
701 uint32_t value; member
905 * protocol selection and CD Disable. It is auto cleared, so there is no need to rewrite a value of 0.
1048 * In this case, the value in SDIO_FBR_EXT_STD_FUNCTION_INTERFACE_CODE identifies
|
| /drivers/peripheral/audio/test/systemtest/supportlibs/hardwaredependence/capture/src/ |
| H A D | audio_libcapture_hardwaredependence_test.cpp | 292 hwCapture->captureParam.captureMode.hwInfo.pathSelect.deviceInfo.deviceSwitchs[0].value = 0;
in HWTEST_F()
|
| /drivers/peripheral/user_auth/test/fuzztest/user_auth/userauthhdi_fuzzer/ |
| H A D | user_auth_hdi_fuzzer.cpp | 198 configParam.value.pinExpiredPeriod = parcel.ReadUint64(); in FillFuzzGlobalConfigParam()
|
| /kernel/linux/linux-5.10/drivers/crypto/cavium/nitrox/ |
| H A D | nitrox_aead.c | 162 creq->ctrl.value = 0; in nitrox_set_creq()
|
| /kernel/linux/linux-5.10/drivers/atm/ |
| H A D | fore200e.h | 333 u32 value : 8, /* register value */
335 bits of the register value field
|
| /kernel/linux/linux-5.10/arch/powerpc/include/asm/ |
| H A D | kvm_host.h | 408 void (*mtsrin)(struct kvm_vcpu *vcpu, u32 srnum, ulong value);
623 /* Time base value when we entered the guest */
|
| /kernel/linux/linux-5.10/arch/arm/mm/ |
| H A D | cache-v7.S | 110 moveq r3, #1 << 1 @ fix LoUIS value
|
| /kernel/linux/linux-5.10/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn30/ |
| H A D | dcn30_clk_mgr.c | 137 /* Set C - Dummy P-State - P-State latency set to "dummy p-state" value */ in dcn3_build_wm_range_table()
211 /* get FbMult value */ in dcn30_get_vco_frequency_from_reg()
213 /* get FbMult value */ in dcn30_get_vco_frequency_from_reg()
221 pll_req.value |= pll_req_reg & clk_mgr->clk_mgr_mask->FbMult_frac; in dcn30_get_vco_frequency_from_reg()
297 /* Always update saved value, even if new value not set due to P-State switching unsupported */ in dcn3_update_clocks()
303 /* set UCLK to requested value if P-State switching is supported, or to re-enable P-State switching */ in dcn3_update_clocks()
393 /* Set max memclk to highest DPM value */
537 /* in case we don't get a value from the register, use default */ in dcn3_clk_mgr_construct()
|
| /kernel/linux/linux-6.6/arch/powerpc/include/asm/ |
| H A D | kvm_host.h | 42 * hardware supports). Both guest and host use this value.
399 void (*mtsrin)(struct kvm_vcpu *vcpu, u32 srnum, ulong value);
624 /* Time base value when we entered the guest */
|
| /kernel/linux/linux-6.6/arch/alpha/kernel/ |
| H A D | entry.S | 521 * frame to indicate that a negative return value wasn't an
543 * $19: The old a3 value
613 stq $0, 0($sp) /* save return value */
850 for our return value will do just fine.
|
| /kernel/linux/linux-5.10/drivers/gpu/drm/amd/pm/inc/ |
| H A D | smu74.h | 108 uint32_t value; member
|
| H A D | smu72_discrete.h | 364 uint32_t value[SMU72_DISCRETE_MC_REGISTER_ARRAY_SIZE]; member
|
| /kernel/linux/linux-5.10/drivers/infiniband/hw/mthca/ |
| H A D | mthca_dev.h | 419 int mthca_array_set(struct mthca_array *array, int index, void *value);
|
| /kernel/linux/linux-5.10/drivers/gpu/drm/omapdrm/ |
| H A D | omap_drv.c | 448 args->value = priv->omaprev; in ioctl_get_param()
|
| /kernel/linux/linux-5.10/drivers/media/platform/exynos4-is/ |
| H A D | fimc-is-param.h | 566 u32 value; member
985 /* This value is varied in case of rev 0.2 */
|
| /kernel/linux/linux-5.10/drivers/media/platform/s3c-camif/ |
| H A D | camif-regs.c | 82 cfg |= colorfx[i].value; in camif_hw_set_effect()
|
| /kernel/linux/linux-5.10/drivers/net/ipa/ |
| H A D | ipa_main.c | 652 return be32_to_cpup(prop->value); in of_property_read_phandle()
688 /* Aggregation granularity value can't be 0, and must fit */ in ipa_validate_build()
|
| /kernel/linux/linux-5.10/drivers/net/wireless/realtek/rtlwifi/btcoexist/ |
| H A D | halbtcoutsrc.h | 721 u32 value);
|
| /kernel/linux/linux-5.10/drivers/sbus/char/ |
| H A D | openprom.c | 57 * structure will be placed in "*opp_p". Return value is the length
457 copy_to_user(op.op_buf, prop->value, len)) in opiocnextprop()
|