Lines Matching refs:value
118 * Any other value - indicates an error.
194 * The value of rr must be 1 since the driver set the cv field to 1.
413 * Any other value - error.
733 * Any other value - error
754 * Any other value - error
838 * Any other value - error
880 * Any other value - error.
1062 * Any other value - error.
1081 * Any other value - error.
1172 * Any other value - error.
1485 * of the value of lpfc_enable_hba_heartbeat.
1882 * failure is a value other than FFER6. Do not call the offline
2178 * Any other value - error.
4749 /* Seed updated value of sg_tablesize */
4759 /* Seed updated value of sg_tablesize */
4774 /* Adjust value in vport */
4800 * Set initial can_queue value since 0 is no longer supported and
4802 * max xri value determined in hba setup.
5030 /* This value is also unchanging */
5316 * value of Mbps for the link speed.
5535 * value of Read topology link speed.
5603 u32 value;
5630 value = LPFC_CGN_TIMER_TO_MIN / phba->cgn_fpin_frequency;
5631 cp->cgn_stat_npm = value;
5634 value = lpfc_cgn_calc_crc32(cp, LPFC_CGN_INFO_SZ,
5636 cp->cgn_info_crc = cpu_to_le32(value);
5684 uint16_t value, mvalue;
5708 value = LPFC_CGN_TIMER_TO_MIN / phba->cgn_fpin_frequency;
5709 cp->cgn_stat_npm = value;
5734 value = (uint16_t)(phba->pport->cfg_lun_queue_depth);
5735 cp->cgn_lunq = cpu_to_le16(value);
5772 value = (uint16_t)dvalue;
5773 *ptr = cpu_to_le16(value);
5776 value = (uint16_t)wvalue;
5777 *ptr = cpu_to_le16(value);
5780 value = (uint16_t)avalue;
5781 *ptr = cpu_to_le16(value);
5791 /* Collect the bandwidth value into the driver's congesion buffer. */
5893 value = phba->cgn_fpin_frequency;
5894 cp->cgn_warn_freq = cpu_to_le16(value);
5895 cp->cgn_alarm_freq = cpu_to_le16(value);
6288 * further details about link status. Overwrite the value of
7829 /* This will be set to correct value after config_port mbox */
7976 /* This will be set to correct value after the read_config mbox */
7979 /* Program the default value of vlan_id and fc_map */
8908 * required. Set the expected maximum count and let the actual value
9244 * adjust the value of can_queue.
9857 "Using driver parameter defined value [%s]",
9861 /* FW supports persistent topology - override module parameter value */
9889 "2020 Using persistent topology value [%s]",
9894 "Using driver parameter defined value [%s]",
13949 * negative value - driver can not claim the device
14771 * negative value - driver can not claim the device
15386 * negative value - driver can not claim the device