xref: /third_party/vixl/test/aarch32/config/cond-rd-rn-rm-a32.json (revision b8021494)

// Copyright 2016, VIXL authors
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are met:
//
//   * Redistributions of source code must retain the above copyright notice,
//     this list of conditions and the following disclaimer.
//   * Redistributions in binary form must reproduce the above copyright notice,
//     this list of conditions and the following disclaimer in the documentation
//     and/or other materials provided with the distribution.
//   * Neither the name of ARM Limited nor the names of its contributors may be
//     used to endorse or promote products derived from this software without
//     specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS CONTRIBUTORS "AS IS" AND
// ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
// WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
// DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
// FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
// DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
// SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
// OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

// Test description for instructions with the following operands:
//   MNEMONIC<c> <rd>, <rn>, <rm>
//
// The instructions covered in this test do not write to the `Q` and `GE` flags,
// these are covered in other description files.

{
  "mnemonics": [
    "Mul",     // MUL{<c>}{<q>} <Rd>, <Rn>, {<Rm>} ; A1
    "Muls",    // MULS{<c>}{<q>} <Rd>, <Rn>, {<Rm>} ; A1
    "Qadd16",  // QADD16{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Qadd8",   // QADD8{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Qasx",    // QASX{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Qsax",    // QSAX{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Qsub16",  // QSUB16{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Qsub8",   // QSUB8{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Sdiv",    // SDIV{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Shadd16", // SHADD16{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Shadd8",  // SHADD8{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Shasx",   // SHASX{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Shsax",   // SHSAX{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Shsub16", // SHSUB16{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Shsub8",  // SHSUB8{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Smmul",   // SMMUL{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Smmulr",  // SMMULR{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Smuad",   // SMUAD{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Smuadx",  // SMUADX{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Smulbb",  // SMULBB{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Smulbt",  // SMULBT{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Smultb",  // SMULTB{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Smultt",  // SMULTT{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Smulwb",  // SMULWB{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Smulwt",  // SMULWT{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Smusd",   // SMUSD{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Smusdx",  // SMUSDX{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Udiv",    // UDIV{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Uhadd16", // UHADD16{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Uhadd8",  // UHADD8{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Uhasx",   // UHASX{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Uhsax",   // UHSAX{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Uhsub16", // UHSUB16{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Uhsub8",  // UHSUB8{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Uqadd16", // UQADD16{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Uqadd8",  // UQADD8{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Uqasx",   // UQASX{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Uqsax",   // UQSAX{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Uqsub16", // UQSUB16{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Uqsub8",  // UQSUB8{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Usad8",   // USAD8{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1

    // Instructions affecting the GE bits.
    "Sadd16", // SADD16{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Sadd8",  // SADD8{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Sasx",   // SASX{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Sel",    // SEL{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Ssax",   // SSAX{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Ssub16", // SSUB16{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Ssub8",  // SSUB8{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Uadd16", // UADD16{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Uadd8",  // UADD8{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Uasx",   // UASX{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Usax",   // USAX{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Usub16", // USUB16{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1
    "Usub8",  // USUB8{<c>}{<q>} {<Rd>}, <Rn>, <Rm> ; A1

    // Instructions affecting the Q bit.
    "Qadd",  // QADD{<c>}{<q>} {<Rd>}, <Rm>, <Rn> ; A1
    "Qdadd", // QDADD{<c>}{<q>} {<Rd>}, <Rm>, <Rn> ; A1
    "Qdsub", // QDSUB{<c>}{<q>} {<Rd>}, <Rm>, <Rn> ; A1
    "Qsub"   // QSUB{<c>}{<q>} {<Rd>}, <Rm>, <Rn> ; A1
  ],
  "description": {
    "operands": [
      {
        "name": "cond",
        "type": "Condition"
      },
      {
        "name": "rd",
        "type": "AllRegistersButPC"
      },
      {
        "name": "rn",
        "type": "AllRegistersButPC"
      },
      {
        "name": "rm",
        "type": "AllRegistersButPC"
      }
    ],
    "inputs": [
      {
        "name": "apsr",
        "type": "NZCV"
      },
      {
        "name": "qbit",
        "type": "Q"
      },
      {
        "name": "ge",
        "type": "GE"
      },
      {
        "name": "rd",
        "type": "Register"
      },
      {
        "name": "rn",
        "type": "Register"
      },
      {
        "name": "rm",
        "type": "Register"
      }
    ]
  },
  "test-files": [
    {
      "type": "assembler",
      "test-cases": [
        {
          "name": "Operands",
          "operands": [
            "cond", "rd", "rn", "rm"
          ],
          "operand-limit": 300
        }
      ]
    },
    {
      "type": "simulator",
      "test-cases": [
        {
          "name": "Condition",
          "operands": [
            "cond"
          ],
          "inputs": [
            "apsr"
          ]
        },
        {
          "name": "RdIsRnIsRm",
          "operands": [
            "rd", "rn", "rm"
          ],
          "inputs": [
            "rd", "rn", "rm"
          ],
          "operand-filter": "(rd == rn) and (rd == rm)",
          "input-filter": "(rd == rn) and (rd == rm)"
        },
        {
          "name": "RdIsRn",
          "operands": [
            "rd", "rn", "rm"
          ],
          "inputs": [
            "rd", "rn", "rm"
          ],
          "operand-filter": "(rd == rn) and (rn != rm)",
          "operand-limit": 10,
          "input-filter": "rd == rn",
          "input-limit": 200
        },
        {
          "name": "RdIsRm",
          "operands": [
            "rd", "rn", "rm"
          ],
          "inputs": [
            "rd", "rn", "rm"
          ],
          "operand-filter": "(rd == rm) and (rn != rm)",
          "operand-limit": 10,
          "input-filter": "rd == rm",
          "input-limit": 200
        },
        {
          "name": "RnIsRm",
          "operands": [
            "rd", "rn", "rm"
          ],
          "inputs": [
            "rd", "rn", "rm"
          ],
          "operand-filter": "(rn == rm) and (rm != rd)",
          "operand-limit": 10,
          "input-filter": "rn == rm",
          "input-limit": 200
        },
        {
          "name": "RdIsNotRnIsNotRm",
          "operands": [
            "rd", "rn", "rm"
          ],
          "inputs": [
            "rd", "rn", "rm"
          ],
          "operand-filter": "(rd != rn) and (rd != rm)",
          "operand-limit": 10,
          "input-limit": 200
        }
      ]
    },
    {
      "name": "ge",
      "type": "simulator",
      "mnemonics": [
        "Sadd16",
        "Sadd8",
        "Sasx",
        "Ssax",
        "Ssub16",
        "Ssub8",
        "Uadd16",
        "Uadd8",
        "Uasx",
        "Usax",
        "Usub16",
        "Usub8"
      ],
      "test-cases": [
        {
          "name": "GE",
          "operands": [
            "rd", "rn", "rm"
          ],
          "inputs": [
            "ge", "rn", "rm"
          ],
          "operand-filter": "(rd != rn) and (rn != rm)",
          "operand-limit": 1,
          // Only use "all set" and "all cleared" as inputs.
          "input-filter": "ge == 'NoFlag' or ge == 'GE0123Flag'",
          "input-limit": 200
        }
      ]
    },
    {
      "name": "sel",
      "type": "simulator",
      "mnemonics": [
        "Sel"
      ],
      "test-cases": [
        {
          "name": "GE",
          "operands": [
            "rd", "rn", "rm"
          ],
          "inputs": [
            "ge", "rn", "rm"
          ],
          "operand-filter": "(rd != rn) and (rn != rm)",
          "operand-limit": 1,
          "input-limit": 200
        }
      ]
    },
    {
      "name": "q",
      "type": "simulator",
      "mnemonics": [
        "Qadd",
        "Qdadd",
        "Qdsub",
        "Qsub"
      ],
      "test-cases": [
        {
          "name": "QOutput",
          "operands": [
            "rn", "rm"
          ],
          "inputs": [
            "qbit", "rn", "rm"
          ],
          "operand-limit": 1,
          "operand-filter": "rn != rm",
          "input-limit": 200
        }
      ]
    }
  ]
}