xref: /third_party/ltp/testcases/network/stress/udp/multi-diffip/udp4-multi-diffip01

#!/bin/sh

################################################################################
##                                                                            ##
## Copyright (c) International Business Machines  Corp., 2005                 ##
##                                                                            ##
## This program is free software;  you can redistribute it and#or modify      ##
## it under the terms of the GNU General Public License as published by       ##
## the Free Software Foundation; either version 2 of the License, or          ##
## (at your option) any later version.                                        ##
##                                                                            ##
## This program is distributed in the hope that it will be useful, but        ##
## WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY ##
## or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License   ##
## for more details.                                                          ##
##                                                                            ##
## You should have received a copy of the GNU General Public License          ##
## along with this program;  if not, write to the Free Software               ##
## Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA    ##
##                                                                            ##
##                                                                            ##
################################################################################
#
# File:
#   udp4-multi-diffip01
#
# Description:
#   Verify that the kernel is not crashed with receiving and sending UDP
#   datagram at different IP address(alias) with the following conditions
#     - The version of IP is IPv4
#     - IPsec is not used
#
#   *) This script may be read by the other test case
#
# Setup:
#   See testcases/network/stress/README
#
# Author:
#   Mitsuru Chinen <mitch@jp.ibm.com>
#
# History:
#	Oct 19 2005 - Created (Mitsuru Chinen)
#
#-----------------------------------------------------------------------
# Uncomment line below for debug output.
#trace_logic=${trace_logic:-"set -x"}
$trace_logic

# The test case ID, the test case count and the total number of test case
TCID=${TCID:-udp4-multi-diffip01}
TST_TOTAL=1
TST_COUNT=1
export TCID
export TST_COUNT
export TST_TOTAL

# Test description
tst_resm TINFO "Verify that the kernel is not crashed with receiving and sending UDP datagram at the different IP addresses(aliases) with the following conditions"

# Make sure the value of LTPROOT
LTPROOT=${LTPROOT:-`(cd ../../../../.. ; pwd)`}
export LTPROOT

# Check the environmanet variable
. check_envval || exit $TST_TOTAL

# Dulation of the test [sec]
NS_DURATION=${NS_DURATION:-3600}      # 1 hour

# The number of IP address (alias)
IP_TOTAL_FOR_TCPIP=${IP_TOTAL_FOR_TCPIP:-100}

#The number of the test link where tests run
LINK_NUM=${LINK_NUM:-0}

# The version of IP
IP_VER=${IP_VER:-4}

# true, if ipsec is used
DO_IPSEC=${DO_IPSEC:-false}

# The value of SPI
SPI=${SPI:-1000}

# IPsec Protocol ( ah / esp / ipcomp )
IPSEC_PROTO=${IPSEC_PROTO:-ah}

# IPsec Mode ( transport / tunnel )
IPSEC_MODE=${IPSEC_MODE:-transport}


#-----------------------------------------------------------------------
#
# Function: do_cleanup
#
# Description:
#   Recover the system configuration
#
#-----------------------------------------------------------------------
do_cleanup()
{
    # Kill the udp traffic server
    killall_udp_traffic

    # Unset SAD/SPD
    output_ipsec_conf flush | setkey -c >/dev/null 2>&1
    $LTP_RSH $RHOST ${LTPROOT}/'testcases/bin/output_ipsec_conf flush | PATH=/sbin:/usr/sbin:$PATH setkey -c' >/dev/null 2>&1

    # Clean up each interface
    initialize_if lhost ${LINK_NUM}
    initialize_if rhost ${LINK_NUM}
}


#-----------------------------------------------------------------------
#
# Setup
#

# Unset the maximum number of processes
ulimit -u unlimited

# Output the informaion
tst_resm TINFO "- Test duration is $NS_DURATION [sec]"
tst_resm TINFO "- Target number of the connection is $IP_TOTAL_FOR_TCPIP"
tst_resm TINFO "- Version of IP is IPv${IP_VER}"

if $DO_IPSEC ; then
    message=`check_setkey`
    if [ $? -ne 0 ]; then
	tst_resm TBROK "$message"
	exit 1
    fi

    case $IPSEC_PROTO in
	ah)
	tst_resm TINFO "- IPsec [ AH / $IPSEC_MODE ]"
	;;
	esp)
	tst_resm TINFO "- IPsec [ ESP / $IPSEC_MODE ]"
	;;
	ipcomp)
	tst_resm TINFO "- IPcomp [ $IPSEC_MODE ]"
	;;
    esac
fi

# name of interface of the local/remote host
lhost_ifname=`get_ifname lhost $LINK_NUM`
if [ $? -ne 0 ]; then
    tst_resm TBROK "Failed to get the interface name at the local host"
    exit $TST_TOTAL
fi

rhost_ifname=`get_ifname rhost $LINK_NUM`
if [ $? -ne 0 ]; then
    tst_resm TBROK "Failed to get the interface name at the remote host"
    exit $TST_TOTAL
fi

# Initialize the system configuration
do_cleanup

# Call do_cleanup function before exit
trap do_cleanup 0

# Loop to assign IP addresses
ipaddr_pair_num=0
while [ $ipaddr_pair_num -lt $IP_TOTAL_FOR_TCPIP ]; do
    # Add new IP addresses
    x=`expr $ipaddr_pair_num \/ 255 % 255`
    y=`expr $ipaddr_pair_num % 255`
    if [ $x -ge 255 ]; then
	tst_resm TINFO "This script cannot add more than $ipaddr_pair_num addresses"
	break
    fi

    case $IP_VER in
	4)
	network_part="10.${x}.${y}"
	network_broadcast=${network_part}.255
	network_mask=24
	lhost_addr="${network_part}.2"
	rhost_addr="${network_part}.1"

	# Set IPv4 addresses to the interfaces
	ip addr add ${lhost_addr}/${network_mask} broadcast $network_broadcast dev $lhost_ifname

	### delete before setting
	if [ $? -eq 2 ]; then
	ip addr del ${lhost_addr}/${network_mask} broadcast $network_broadcast dev $lhost_ifname  2>&1
	ip addr add ${lhost_addr}/${network_mask} broadcast $network_broadcast dev $lhost_ifname
	fi

	if [ $? -ne 0 ]; then
	    if [ $ipaddr_pair_num -eq 0 ]; then
		tst_resm TBROK "Failed to add any IP address at the local"
		exit 1
	    else
		tst_resm TINFO "The number of IP address at the local host seems to reach the maximum. The number is $ipaddr_pair_num"
	    fi
	    break
	fi

	ret=`$LTP_RSH $RHOST 'PATH=/sbin:/usr/sbin:$PATH ip' addr add ${rhost_addr}/${network_mask} broadcast $network_broadcast dev $rhost_ifname' ; echo $?'`
	if [ $ret -eq 2 ]; then
	$LTP_RSH $RHOST 'PATH=/sbin:/usr/sbin:$PATH ip' addr del ${rhost_addr}/${network_mask} broadcast $network_broadcast dev $rhost_ifname
	ret=`$LTP_RSH $RHOST 'PATH=/sbin:/usr/sbin:$PATH ip' addr add ${rhost_addr}/${network_mask} broadcast $network_broadcast dev $rhost_ifname' ; echo $?'`
	fi
	if [ $ret -ne 0 ]; then
	    if [ $ipaddr_pair_num -eq 0 ]; then
		tst_resm TBROK "Failed to add any IP address at the remote"
		exit 1
	    else
		tst_resm TINFO "The number of IP address at the remote host seems to reach the maximum. The number is $ipaddr_pair_num"
	    fi
	    break
	fi
	;;

	6)
	hex_x=`printf %x $x`
	hex_y=`printf %x $y`

	network_part="fd00:1:${hex_x}:${hex_y}"
	network_mask=64
	lhost_addr="${network_part}::2"
	rhost_addr="${network_part}::1"

	# Set IPv6 addresses to the interfaces
	ip addr add ${lhost_addr}/${network_mask} dev $lhost_ifname

	if [ $? -eq 2 ]; then
	ip addr del ${lhost_addr}/${network_mask} dev $lhost_ifname  2>&1
	ip addr add ${lhost_addr}/${network_mask} dev $lhost_ifname
	fi

	if [ $? -ne 0 ]; then
	    if [ $ipaddr_pair_num -eq 0 ]; then
		tst_resm TBROK "Failed to add any IP address at the local"
		exit 1
	    else
		tst_resm TINFO "The number of IP address at the local host seems to reach the maximum. The number is $ipaddr_pair_num"
	    fi
	    break
	fi

	ret=`$LTP_RSH $RHOST 'PATH=/sbin:/usr/sbin:$PATH ip' addr add ${rhost_addr}/${network_mask} dev $rhost_ifname' ; echo $?'`

	if [ $ret -eq 2 ]; then
	LTP_RSH $RHOST 'PATH=/sbin:/usr/sbin:$PATH ip' addr del ${rhost_addr}/${network_mask} dev $rhost_ifname
	ret=`$LTP_RSH $RHOST 'PATH=/sbin:/usr/sbin:$PATH ip' addr add ${rhost_addr}/${network_mask} dev $rhost_ifname' ; echo $?'`
	fi

	if [ $ret -ne 0 ]; then
	    if [ $ipaddr_pair_num -eq 0 ]; then
		tst_resm TBROK "Failed to add any IP address at the remote"
		exit 1
	    else
		tst_resm TINFO "The number of IP address at the remote host seems to reach the maximum. The number is $ipaddr_pair_num"
	    fi
	    break
	fi
	;;
    esac

    # Set SAD/SPD
    if $DO_IPSEC ; then
	ipsec_log=`mktemp -p $TMPDIR`
	output_ipsec_conf src \
	    $IPSEC_PROTO $IPSEC_MODE $SPI $lhost_addr $rhost_addr \
		| setkey -c 2>&1 | tee $ipsec_log
	if [ $? -ne 0 -o -s $ipsec_log ]; then
	    rm -f $ipsec_log
	    if [ $ipaddr_pair_num -eq 0 ]; then
		tst_resm TBROK "Failed to add any SAD/SPD"
		exit 1
	    else
		tst_resm TINFO "The number of SAD/SPD seems to reach the maximum at the local host."
	    fi
	    break
	fi
	rm -f $ipsec_log

	$LTP_RSH $RHOST ${LTPROOT}/testcases/bin/output_ipsec_conf dst $IPSEC_PROTO $IPSEC_MODE $SPI $lhost_addr $rhost_addr' | PATH=/sbin:/usr/sbin:$PATH setkey -c' 2>&1 | tee $ipsec_log
	if [ $? -ne 0 -o -s $ipsec_log ]; then
	    rm -f $ipsec_log
	    if [ $ipaddr_pair_num -eq 0 ]; then
		tst_resm TBROK "Failed to add any SAD/SPD"
		exit 1
	    else
		tst_resm TINFO "The number of SAD/SPD seems to reach the maximum at the remote host."
	    fi
	    break
	fi
	rm -f $ipsec_log
    fi

    # Check the connectivity
    case $IP_VER in
	4)
	ret=`$LTP_RSH $RHOST ${LTPROOT}/testcases/bin/check_icmpv4_connectivity $rhost_ifname $lhost_addr' ; echo $?'`
	if [ $ret -ne 0 ]; then
	    tst_resm TBROK "No IPv4 connectivity among ${ipaddr_pair_num}th IP a
	    ddress pair"
	    exit 1
	fi
	;;

	6)
	ret=`$LTP_RSH $RHOST ${LTPROOT}/testcases/bin/check_icmpv6_connectivity $rhost_ifname $lhost_addr' ; echo $?'`
	if [ $ret -ne 0 ]; then
	    tst_resm TBROK "No IPv6 connectivity among ${ipaddr_pair_num}th IP a
	    ddress pair"
	    exit 1
	fi
	;;
    esac

    if [ $? -ne 0 ]; then
	tst_resm TFAIL "There is no connectivity."
	exit 1
    fi

    ipaddr_pair_num=`expr $ipaddr_pair_num + 1`
done


#-----------------------------------------------------------------------
#
# Main
#
#

# Find the available consecutive ports
server_port=`find_portbundle udp 1025 1`
if [ $? -ne 0 ]; then
    tst_resm TBROK "No port is available."
    exit 1
fi

# Run a UDP traffic server
info_file=`mktemp -p $TMPDIR`
ns-udpserver -b -f $IP_VER -p $server_port -o $info_file
if [ $? -ne 0 ]; then
    tst_resm TFAIL "Failed to run a UDP traffic server"
    exit 1
fi

# Collect the information of the server
while true ; do
    if [ -s $info_file ]; then
	break
    fi
done
server_pid=`grep PID: $info_file | cut -f 2 -d ' '`
rm -f $info_file

# Make connections
connection_num=0
while [ $connection_num -lt $ipaddr_pair_num ]; do
    # IP addresses
    x=`expr $connection_num \/ 255 % 255`
    y=`expr $connection_num % 255`

    case $IP_VER in
	4)
	lhost_addr="10.${x}.${y}.2"
	;;

	6)
	hex_x=`printf %x $x`
	hex_y=`printf %x $y`
	lhost_addr="fd00:1:${hex_x}:${hex_y}::2"
	;;
    esac

    # Run a client
    ret=`$LTP_RSH $RHOST ${LTPROOT}/testcases/bin/ns-udpclient -b -f $IP_VER -S $lhost_addr -p $server_port' ; echo $?'`
    if [ $ret -ne 0 ]; then
	if [ $connection_num -eq 0 ]; then
	    tst_resm TFAIL "Failed to run any client"
	    exit 1
	else
	    tst_resm TINFO "$connection_num seems the maximum number of the client"
	fi
	break
    fi
    connection_num=`expr $connection_num + 1`
done


# Watch the UDP traffic server
start_epoc=`date +%s`
while true ; do
    current_epoc=`date +%s`
    elapse_epoc=`expr $current_epoc - $start_epoc`

    if [ $elapse_epoc -ge $NS_DURATION ]; then
	break
    else
	ps auxw | fgrep ns-udpserver | fgrep -l $server_pid >/dev/null 2>&1
	if [ $? -ne 0 ]; then
	    tst_resm TFAIL "udp traffic server is dead in $elapse_epoc [sec]"
	    exit 1
	fi
    fi
    sleep 1
done


#-----------------------------------------------------------------------
#
# Clean up
#

tst_resm TPASS "Test is finished successfully."
exit 0