1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 *  Copyright (c) by Jaroslav Kysela <perex@perex.cz>,
4 *                   Hannu Savolainen 1993-1996,
5 *                   Rob Hooft
6 *
7 *  Routines for control of AdLib FM cards (OPL2/OPL3/OPL4 chips)
8 *
9 *  Most if code is ported from OSS/Lite.
10 */
11
12#include <sound/opl3.h>
13#include <linux/io.h>
14#include <linux/delay.h>
15#include <linux/module.h>
16#include <linux/init.h>
17#include <linux/slab.h>
18#include <linux/ioport.h>
19#include <sound/minors.h>
20#include "opl3_voice.h"
21
22MODULE_AUTHOR("Jaroslav Kysela <perex@perex.cz>, Hannu Savolainen 1993-1996, Rob Hooft");
23MODULE_DESCRIPTION("Routines for control of AdLib FM cards (OPL2/OPL3/OPL4 chips)");
24MODULE_LICENSE("GPL");
25
26static void snd_opl2_command(struct snd_opl3 * opl3, unsigned short cmd, unsigned char val)
27{
28	unsigned long flags;
29	unsigned long port;
30
31	/*
32	 * The original 2-OP synth requires a quite long delay
33	 * after writing to a register.
34	 */
35
36	port = (cmd & OPL3_RIGHT) ? opl3->r_port : opl3->l_port;
37
38	spin_lock_irqsave(&opl3->reg_lock, flags);
39
40	outb((unsigned char) cmd, port);
41	udelay(10);
42
43	outb((unsigned char) val, port + 1);
44	udelay(30);
45
46	spin_unlock_irqrestore(&opl3->reg_lock, flags);
47}
48
49static void snd_opl3_command(struct snd_opl3 * opl3, unsigned short cmd, unsigned char val)
50{
51	unsigned long flags;
52	unsigned long port;
53
54	/*
55	 * The OPL-3 survives with just two INBs
56	 * after writing to a register.
57	 */
58
59	port = (cmd & OPL3_RIGHT) ? opl3->r_port : opl3->l_port;
60
61	spin_lock_irqsave(&opl3->reg_lock, flags);
62
63	outb((unsigned char) cmd, port);
64	inb(opl3->l_port);
65	inb(opl3->l_port);
66
67	outb((unsigned char) val, port + 1);
68	inb(opl3->l_port);
69	inb(opl3->l_port);
70
71	spin_unlock_irqrestore(&opl3->reg_lock, flags);
72}
73
74static int snd_opl3_detect(struct snd_opl3 * opl3)
75{
76	/*
77	 * This function returns 1 if the FM chip is present at the given I/O port
78	 * The detection algorithm plays with the timer built in the FM chip and
79	 * looks for a change in the status register.
80	 *
81	 * Note! The timers of the FM chip are not connected to AdLib (and compatible)
82	 * boards.
83	 *
84	 * Note2! The chip is initialized if detected.
85	 */
86
87	unsigned char stat1, stat2, signature;
88
89	/* Reset timers 1 and 2 */
90	opl3->command(opl3, OPL3_LEFT | OPL3_REG_TIMER_CONTROL, OPL3_TIMER1_MASK | OPL3_TIMER2_MASK);
91	/* Reset the IRQ of the FM chip */
92	opl3->command(opl3, OPL3_LEFT | OPL3_REG_TIMER_CONTROL, OPL3_IRQ_RESET);
93	signature = stat1 = inb(opl3->l_port);	/* Status register */
94	if ((stat1 & 0xe0) != 0x00) {	/* Should be 0x00 */
95		snd_printd("OPL3: stat1 = 0x%x\n", stat1);
96		return -ENODEV;
97	}
98	/* Set timer1 to 0xff */
99	opl3->command(opl3, OPL3_LEFT | OPL3_REG_TIMER1, 0xff);
100	/* Unmask and start timer 1 */
101	opl3->command(opl3, OPL3_LEFT | OPL3_REG_TIMER_CONTROL, OPL3_TIMER2_MASK | OPL3_TIMER1_START);
102	/* Now we have to delay at least 80us */
103	udelay(200);
104	/* Read status after timers have expired */
105	stat2 = inb(opl3->l_port);
106	/* Stop the timers */
107	opl3->command(opl3, OPL3_LEFT | OPL3_REG_TIMER_CONTROL, OPL3_TIMER1_MASK | OPL3_TIMER2_MASK);
108	/* Reset the IRQ of the FM chip */
109	opl3->command(opl3, OPL3_LEFT | OPL3_REG_TIMER_CONTROL, OPL3_IRQ_RESET);
110	if ((stat2 & 0xe0) != 0xc0) {	/* There is no YM3812 */
111		snd_printd("OPL3: stat2 = 0x%x\n", stat2);
112		return -ENODEV;
113	}
114
115	/* If the toplevel code knows exactly the type of chip, don't try
116	   to detect it. */
117	if (opl3->hardware != OPL3_HW_AUTO)
118		return 0;
119
120	/* There is a FM chip on this address. Detect the type (OPL2 to OPL4) */
121	if (signature == 0x06) {	/* OPL2 */
122		opl3->hardware = OPL3_HW_OPL2;
123	} else {
124		/*
125		 * If we had an OPL4 chip, opl3->hardware would have been set
126		 * by the OPL4 driver; so we can assume OPL3 here.
127		 */
128		if (snd_BUG_ON(!opl3->r_port))
129			return -ENODEV;
130		opl3->hardware = OPL3_HW_OPL3;
131	}
132	return 0;
133}
134
135/*
136 *  AdLib timers
137 */
138
139/*
140 *  Timer 1 - 80us
141 */
142
143static int snd_opl3_timer1_start(struct snd_timer * timer)
144{
145	unsigned long flags;
146	unsigned char tmp;
147	unsigned int ticks;
148	struct snd_opl3 *opl3;
149
150	opl3 = snd_timer_chip(timer);
151	spin_lock_irqsave(&opl3->timer_lock, flags);
152	ticks = timer->sticks;
153	tmp = (opl3->timer_enable | OPL3_TIMER1_START) & ~OPL3_TIMER1_MASK;
154	opl3->timer_enable = tmp;
155	opl3->command(opl3, OPL3_LEFT | OPL3_REG_TIMER1, 256 - ticks);	/* timer 1 count */
156	opl3->command(opl3, OPL3_LEFT | OPL3_REG_TIMER_CONTROL, tmp);	/* enable timer 1 IRQ */
157	spin_unlock_irqrestore(&opl3->timer_lock, flags);
158	return 0;
159}
160
161static int snd_opl3_timer1_stop(struct snd_timer * timer)
162{
163	unsigned long flags;
164	unsigned char tmp;
165	struct snd_opl3 *opl3;
166
167	opl3 = snd_timer_chip(timer);
168	spin_lock_irqsave(&opl3->timer_lock, flags);
169	tmp = (opl3->timer_enable | OPL3_TIMER1_MASK) & ~OPL3_TIMER1_START;
170	opl3->timer_enable = tmp;
171	opl3->command(opl3, OPL3_LEFT | OPL3_REG_TIMER_CONTROL, tmp);	/* disable timer #1 */
172	spin_unlock_irqrestore(&opl3->timer_lock, flags);
173	return 0;
174}
175
176/*
177 *  Timer 2 - 320us
178 */
179
180static int snd_opl3_timer2_start(struct snd_timer * timer)
181{
182	unsigned long flags;
183	unsigned char tmp;
184	unsigned int ticks;
185	struct snd_opl3 *opl3;
186
187	opl3 = snd_timer_chip(timer);
188	spin_lock_irqsave(&opl3->timer_lock, flags);
189	ticks = timer->sticks;
190	tmp = (opl3->timer_enable | OPL3_TIMER2_START) & ~OPL3_TIMER2_MASK;
191	opl3->timer_enable = tmp;
192	opl3->command(opl3, OPL3_LEFT | OPL3_REG_TIMER2, 256 - ticks);	/* timer 1 count */
193	opl3->command(opl3, OPL3_LEFT | OPL3_REG_TIMER_CONTROL, tmp);	/* enable timer 1 IRQ */
194	spin_unlock_irqrestore(&opl3->timer_lock, flags);
195	return 0;
196}
197
198static int snd_opl3_timer2_stop(struct snd_timer * timer)
199{
200	unsigned long flags;
201	unsigned char tmp;
202	struct snd_opl3 *opl3;
203
204	opl3 = snd_timer_chip(timer);
205	spin_lock_irqsave(&opl3->timer_lock, flags);
206	tmp = (opl3->timer_enable | OPL3_TIMER2_MASK) & ~OPL3_TIMER2_START;
207	opl3->timer_enable = tmp;
208	opl3->command(opl3, OPL3_LEFT | OPL3_REG_TIMER_CONTROL, tmp);	/* disable timer #1 */
209	spin_unlock_irqrestore(&opl3->timer_lock, flags);
210	return 0;
211}
212
213/*
214
215 */
216
217static const struct snd_timer_hardware snd_opl3_timer1 =
218{
219	.flags =	SNDRV_TIMER_HW_STOP,
220	.resolution =	80000,
221	.ticks =	256,
222	.start =	snd_opl3_timer1_start,
223	.stop =		snd_opl3_timer1_stop,
224};
225
226static const struct snd_timer_hardware snd_opl3_timer2 =
227{
228	.flags =	SNDRV_TIMER_HW_STOP,
229	.resolution =	320000,
230	.ticks =	256,
231	.start =	snd_opl3_timer2_start,
232	.stop =		snd_opl3_timer2_stop,
233};
234
235static int snd_opl3_timer1_init(struct snd_opl3 * opl3, int timer_no)
236{
237	struct snd_timer *timer = NULL;
238	struct snd_timer_id tid;
239	int err;
240
241	tid.dev_class = SNDRV_TIMER_CLASS_CARD;
242	tid.dev_sclass = SNDRV_TIMER_SCLASS_NONE;
243	tid.card = opl3->card->number;
244	tid.device = timer_no;
245	tid.subdevice = 0;
246	err = snd_timer_new(opl3->card, "AdLib timer #1", &tid, &timer);
247	if (err >= 0) {
248		strcpy(timer->name, "AdLib timer #1");
249		timer->private_data = opl3;
250		timer->hw = snd_opl3_timer1;
251	}
252	opl3->timer1 = timer;
253	return err;
254}
255
256static int snd_opl3_timer2_init(struct snd_opl3 * opl3, int timer_no)
257{
258	struct snd_timer *timer = NULL;
259	struct snd_timer_id tid;
260	int err;
261
262	tid.dev_class = SNDRV_TIMER_CLASS_CARD;
263	tid.dev_sclass = SNDRV_TIMER_SCLASS_NONE;
264	tid.card = opl3->card->number;
265	tid.device = timer_no;
266	tid.subdevice = 0;
267	err = snd_timer_new(opl3->card, "AdLib timer #2", &tid, &timer);
268	if (err >= 0) {
269		strcpy(timer->name, "AdLib timer #2");
270		timer->private_data = opl3;
271		timer->hw = snd_opl3_timer2;
272	}
273	opl3->timer2 = timer;
274	return err;
275}
276
277/*
278
279 */
280
281void snd_opl3_interrupt(struct snd_hwdep * hw)
282{
283	unsigned char status;
284	struct snd_opl3 *opl3;
285	struct snd_timer *timer;
286
287	if (hw == NULL)
288		return;
289
290	opl3 = hw->private_data;
291	status = inb(opl3->l_port);
292#if 0
293	snd_printk(KERN_DEBUG "AdLib IRQ status = 0x%x\n", status);
294#endif
295	if (!(status & 0x80))
296		return;
297
298	if (status & 0x40) {
299		timer = opl3->timer1;
300		snd_timer_interrupt(timer, timer->sticks);
301	}
302	if (status & 0x20) {
303		timer = opl3->timer2;
304		snd_timer_interrupt(timer, timer->sticks);
305	}
306}
307
308EXPORT_SYMBOL(snd_opl3_interrupt);
309
310/*
311
312 */
313
314static int snd_opl3_free(struct snd_opl3 *opl3)
315{
316	if (snd_BUG_ON(!opl3))
317		return -ENXIO;
318	if (opl3->private_free)
319		opl3->private_free(opl3);
320	snd_opl3_clear_patches(opl3);
321	release_and_free_resource(opl3->res_l_port);
322	release_and_free_resource(opl3->res_r_port);
323	kfree(opl3);
324	return 0;
325}
326
327static int snd_opl3_dev_free(struct snd_device *device)
328{
329	struct snd_opl3 *opl3 = device->device_data;
330	return snd_opl3_free(opl3);
331}
332
333int snd_opl3_new(struct snd_card *card,
334		 unsigned short hardware,
335		 struct snd_opl3 **ropl3)
336{
337	static const struct snd_device_ops ops = {
338		.dev_free = snd_opl3_dev_free,
339	};
340	struct snd_opl3 *opl3;
341	int err;
342
343	*ropl3 = NULL;
344	opl3 = kzalloc(sizeof(*opl3), GFP_KERNEL);
345	if (!opl3)
346		return -ENOMEM;
347
348	opl3->card = card;
349	opl3->hardware = hardware;
350	spin_lock_init(&opl3->reg_lock);
351	spin_lock_init(&opl3->timer_lock);
352
353	err = snd_device_new(card, SNDRV_DEV_CODEC, opl3, &ops);
354	if (err < 0) {
355		snd_opl3_free(opl3);
356		return err;
357	}
358
359	*ropl3 = opl3;
360	return 0;
361}
362
363EXPORT_SYMBOL(snd_opl3_new);
364
365int snd_opl3_init(struct snd_opl3 *opl3)
366{
367	if (! opl3->command) {
368		printk(KERN_ERR "snd_opl3_init: command not defined!\n");
369		return -EINVAL;
370	}
371
372	opl3->command(opl3, OPL3_LEFT | OPL3_REG_TEST, OPL3_ENABLE_WAVE_SELECT);
373	/* Melodic mode */
374	opl3->command(opl3, OPL3_LEFT | OPL3_REG_PERCUSSION, 0x00);
375
376	switch (opl3->hardware & OPL3_HW_MASK) {
377	case OPL3_HW_OPL2:
378		opl3->max_voices = MAX_OPL2_VOICES;
379		break;
380	case OPL3_HW_OPL3:
381	case OPL3_HW_OPL4:
382		opl3->max_voices = MAX_OPL3_VOICES;
383		/* Enter OPL3 mode */
384		opl3->command(opl3, OPL3_RIGHT | OPL3_REG_MODE, OPL3_OPL3_ENABLE);
385	}
386	return 0;
387}
388
389EXPORT_SYMBOL(snd_opl3_init);
390
391int snd_opl3_create(struct snd_card *card,
392		    unsigned long l_port,
393		    unsigned long r_port,
394		    unsigned short hardware,
395		    int integrated,
396		    struct snd_opl3 ** ropl3)
397{
398	struct snd_opl3 *opl3;
399	int err;
400
401	*ropl3 = NULL;
402	err = snd_opl3_new(card, hardware, &opl3);
403	if (err < 0)
404		return err;
405	if (! integrated) {
406		opl3->res_l_port = request_region(l_port, 2, "OPL2/3 (left)");
407		if (!opl3->res_l_port) {
408			snd_printk(KERN_ERR "opl3: can't grab left port 0x%lx\n", l_port);
409			snd_device_free(card, opl3);
410			return -EBUSY;
411		}
412		if (r_port != 0) {
413			opl3->res_r_port = request_region(r_port, 2, "OPL2/3 (right)");
414			if (!opl3->res_r_port) {
415				snd_printk(KERN_ERR "opl3: can't grab right port 0x%lx\n", r_port);
416				snd_device_free(card, opl3);
417				return -EBUSY;
418			}
419		}
420	}
421	opl3->l_port = l_port;
422	opl3->r_port = r_port;
423
424	switch (opl3->hardware) {
425	/* some hardware doesn't support timers */
426	case OPL3_HW_OPL3_SV:
427	case OPL3_HW_OPL3_CS:
428	case OPL3_HW_OPL3_FM801:
429		opl3->command = &snd_opl3_command;
430		break;
431	default:
432		opl3->command = &snd_opl2_command;
433		err = snd_opl3_detect(opl3);
434		if (err < 0) {
435			snd_printd("OPL2/3 chip not detected at 0x%lx/0x%lx\n",
436				   opl3->l_port, opl3->r_port);
437			snd_device_free(card, opl3);
438			return err;
439		}
440		/* detect routine returns correct hardware type */
441		switch (opl3->hardware & OPL3_HW_MASK) {
442		case OPL3_HW_OPL3:
443		case OPL3_HW_OPL4:
444			opl3->command = &snd_opl3_command;
445		}
446	}
447
448	snd_opl3_init(opl3);
449
450	*ropl3 = opl3;
451	return 0;
452}
453
454EXPORT_SYMBOL(snd_opl3_create);
455
456int snd_opl3_timer_new(struct snd_opl3 * opl3, int timer1_dev, int timer2_dev)
457{
458	int err;
459
460	if (timer1_dev >= 0) {
461		err = snd_opl3_timer1_init(opl3, timer1_dev);
462		if (err < 0)
463			return err;
464	}
465	if (timer2_dev >= 0) {
466		err = snd_opl3_timer2_init(opl3, timer2_dev);
467		if (err < 0) {
468			snd_device_free(opl3->card, opl3->timer1);
469			opl3->timer1 = NULL;
470			return err;
471		}
472	}
473	return 0;
474}
475
476EXPORT_SYMBOL(snd_opl3_timer_new);
477
478int snd_opl3_hwdep_new(struct snd_opl3 * opl3,
479		       int device, int seq_device,
480		       struct snd_hwdep ** rhwdep)
481{
482	struct snd_hwdep *hw;
483	struct snd_card *card = opl3->card;
484	int err;
485
486	if (rhwdep)
487		*rhwdep = NULL;
488
489	/* create hardware dependent device (direct FM) */
490
491	err = snd_hwdep_new(card, "OPL2/OPL3", device, &hw);
492	if (err < 0) {
493		snd_device_free(card, opl3);
494		return err;
495	}
496	hw->private_data = opl3;
497	hw->exclusive = 1;
498#ifdef CONFIG_SND_OSSEMUL
499	if (device == 0)
500		hw->oss_type = SNDRV_OSS_DEVICE_TYPE_DMFM;
501#endif
502	strcpy(hw->name, hw->id);
503	switch (opl3->hardware & OPL3_HW_MASK) {
504	case OPL3_HW_OPL2:
505		strcpy(hw->name, "OPL2 FM");
506		hw->iface = SNDRV_HWDEP_IFACE_OPL2;
507		break;
508	case OPL3_HW_OPL3:
509		strcpy(hw->name, "OPL3 FM");
510		hw->iface = SNDRV_HWDEP_IFACE_OPL3;
511		break;
512	case OPL3_HW_OPL4:
513		strcpy(hw->name, "OPL4 FM");
514		hw->iface = SNDRV_HWDEP_IFACE_OPL4;
515		break;
516	}
517
518	/* operators - only ioctl */
519	hw->ops.open = snd_opl3_open;
520	hw->ops.ioctl = snd_opl3_ioctl;
521	hw->ops.write = snd_opl3_write;
522	hw->ops.release = snd_opl3_release;
523
524	opl3->hwdep = hw;
525	opl3->seq_dev_num = seq_device;
526#if IS_ENABLED(CONFIG_SND_SEQUENCER)
527	if (snd_seq_device_new(card, seq_device, SNDRV_SEQ_DEV_ID_OPL3,
528			       sizeof(struct snd_opl3 *), &opl3->seq_dev) >= 0) {
529		strcpy(opl3->seq_dev->name, hw->name);
530		*(struct snd_opl3 **)SNDRV_SEQ_DEVICE_ARGPTR(opl3->seq_dev) = opl3;
531	}
532#endif
533	if (rhwdep)
534		*rhwdep = hw;
535	return 0;
536}
537
538EXPORT_SYMBOL(snd_opl3_hwdep_new);
539