xref: /kernel/linux/linux-6.6/scripts/dtc/include-prefixes/powerpc/fsl/t104xqds.dtsi

/*
 * T104xQDS Device Tree Source
 *
 * Copyright 2013 - 2015 Freescale Semiconductor Inc.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *     * Redistributions of source code must retain the above copyright
 *	 notice, this list of conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above copyright
 *	 notice, this list of conditions and the following disclaimer in the
 *	 documentation and/or other materials provided with the distribution.
 *     * Neither the name of Freescale Semiconductor nor the
 *	 names of its contributors may be used to endorse or promote products
 *	 derived from this software without specific prior written permission.
 *
 *
 * ALTERNATIVELY, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") as published by the Free Software
 * Foundation, either version 2 of that License or (at your option) any
 * later version.
 *
 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/ {
	model = "fsl,T1040QDS";
	#address-cells = <2>;
	#size-cells = <2>;
	interrupt-parent = <&mpic>;

	aliases {
		emi1_rgmii0 = &t1040mdio0;
		emi1_rgmii1 = &t1040mdio1;
		emi1_slot3 = &t1040mdio3;
		emi1_slot5 = &t1040mdio5;
		emi1_slot6 = &t1040mdio6;
		emi1_slot7 = &t1040mdio7;
		rgmii_phy1 = &rgmii_phy1;
		rgmii_phy2 = &rgmii_phy2;
		phy_s3_01 = &phy_s3_01;
		phy_s3_02 = &phy_s3_02;
		phy_s3_03 = &phy_s3_03;
		phy_s3_04 = &phy_s3_04;
		phy_s5_01 = &phy_s5_01;
		phy_s5_02 = &phy_s5_02;
		phy_s5_03 = &phy_s5_03;
		phy_s5_04 = &phy_s5_04;
		phy_s6_01 = &phy_s6_01;
		phy_s6_02 = &phy_s6_02;
		phy_s6_03 = &phy_s6_03;
		phy_s6_04 = &phy_s6_04;
		phy_s7_01 = &phy_s7_01;
		phy_s7_02 = &phy_s7_02;
		phy_s7_03 = &phy_s7_03;
		phy_s7_04 = &phy_s7_04;
	};

	reserved-memory {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		bman_fbpr: bman-fbpr {
			size = <0 0x1000000>;
			alignment = <0 0x1000000>;
		};
		qman_fqd: qman-fqd {
			size = <0 0x400000>;
			alignment = <0 0x400000>;
		};
		qman_pfdr: qman-pfdr {
			size = <0 0x2000000>;
			alignment = <0 0x2000000>;
		};
	};

	ifc: localbus@ffe124000 {
		reg = <0xf 0xfe124000 0 0x2000>;
		ranges = <0 0 0xf 0xe8000000 0x08000000
			  2 0 0xf 0xff800000 0x00010000
			  3 0 0xf 0xffdf0000 0x00008000>;

		nor@0,0 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "cfi-flash";
			reg = <0x0 0x0 0x8000000>;

			bank-width = <2>;
			device-width = <1>;
		};

		nand@2,0 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "fsl,ifc-nand";
			reg = <0x2 0x0 0x10000>;
		};

		board-control@3,0 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "fsl,fpga-qixis";
			reg = <3 0 0x300>;
			ranges = <0 3 0 0x300>;

			mdio-mux-emi1 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "mdio-mux-mmioreg", "mdio-mux";
				mdio-parent-bus = <&mdio0>;
				reg = <0x54 1>;
				mux-mask = <0xe0>;

				t1040mdio0: mdio@0 {
					#address-cells = <1>;
					#size-cells = <0>;
					reg = <0x00>;
					status = "disabled";

					rgmii_phy1: ethernet-phy@1 {
						reg = <0x1>;
					};
				};

				t1040mdio1: mdio@20 {
					#address-cells = <1>;
					#size-cells = <0>;
					reg = <0x20>;
					status = "disabled";

					rgmii_phy2: ethernet-phy@2 {
						reg = <0x2>;
					};
				};

				t1040mdio3: mdio@60 {
					#address-cells = <1>;
					#size-cells = <0>;
					reg = <0x60>;
					status = "disabled";

					phy_s3_01: ethernet-phy@1c {
						reg = <0x1c>;
					};

					phy_s3_02: ethernet-phy@1d {
						reg = <0x1d>;
					};

					phy_s3_03: ethernet-phy@1e {
						reg = <0x1e>;
					};

					phy_s3_04: ethernet-phy@1f {
						reg = <0x1f>;
					};
				};

				t1040mdio5: mdio@a0 {
					#address-cells = <1>;
					#size-cells = <0>;
					reg = <0xa0>;

					phy_s5_01: ethernet-phy@1c {
						reg = <0x14>;
					};

					phy_s5_02: ethernet-phy@1d {
						reg = <0x15>;
					};

					phy_s5_03: ethernet-phy@1e {
						reg = <0x16>;
					};

					phy_s5_04: ethernet-phy@1f {
						reg = <0x17>;
					};
				};

				t1040mdio6: mdio@c0 {
					#address-cells = <1>;
					#size-cells = <0>;
					reg = <0xc0>;

					phy_s6_01: ethernet-phy@1c {
						reg = <0x18>;
					};

					phy_s6_02: ethernet-phy@1d {
						reg = <0x19>;
					};

					phy_s6_03: ethernet-phy@1e {
						reg = <0x1a>;
					};

					phy_s6_04: ethernet-phy@1f {
						reg = <0x1b>;
					};
				};

				t1040mdio7: mdio@e0 {
					#address-cells = <1>;
					#size-cells = <0>;
					reg = <0xe0>;
					status = "disabled";

					phy_s7_01: ethernet-phy@1c {
						reg = <0x1c>;
					};

					phy_s7_02: ethernet-phy@1d {
						reg = <0x1d>;
					};

					phy_s7_03: ethernet-phy@1e {
						reg = <0x1e>;
					};

					phy_s7_04: ethernet-phy@1f {
						reg = <0x1f>;
					};
				};
			};
		};
	};

	memory {
		device_type = "memory";
	};

	dcsr: dcsr@f00000000 {
		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
	};

	bportals: bman-portals@ff4000000 {
		ranges = <0x0 0xf 0xf4000000 0x2000000>;
	};

	qportals: qman-portals@ff6000000 {
		ranges = <0x0 0xf 0xf6000000 0x2000000>;
	};

	soc: soc@ffe000000 {
		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
		reg = <0xf 0xfe000000 0 0x00001000>;

		spi@110000 {
			flash@0 {
				#address-cells = <1>;
				#size-cells = <1>;
				compatible = "micron,n25q128a11", "jedec,spi-nor";
				reg = <0>;
				spi-max-frequency = <10000000>; /* input clock */
			};
		};

		i2c@118000 {
			i2c-mux@77 {
				compatible = "nxp,pca9547";
				reg = <0x77>;
			};
			rtc@68 {
				compatible = "dallas,ds3232";
				reg = <0x68>;
				interrupts = <0x1 0x1 0 0>;
			};
		};

		fman@400000 {
			ethernet@e0000 {
				fixed-link = <0 1 1000 0 0>;
				phy-connection-type = "sgmii";
			};

			ethernet@e2000 {
				fixed-link = <1 1 1000 0 0>;
				phy-connection-type = "sgmii";
			};

			ethernet@e4000 {
				phy-handle = <&phy_s7_03>;
				phy-connection-type = "sgmii";
			};

			ethernet@e6000 {
				phy-handle = <&rgmii_phy1>;
				phy-connection-type = "rgmii";
			};

			ethernet@e8000 {
				phy-handle = <&rgmii_phy2>;
				phy-connection-type = "rgmii";
			};
		};
	};

	pci0: pcie@ffe240000 {
		reg = <0xf 0xfe240000 0 0x10000>;
		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x10000000
			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
		pcie@0 {
			ranges = <0x02000000 0 0xe0000000
				  0x02000000 0 0xe0000000
				  0 0x10000000

				  0x01000000 0 0x00000000
				  0x01000000 0 0x00000000
				  0 0x00010000>;
		};
	};

	pci1: pcie@ffe250000 {
		reg = <0xf 0xfe250000 0 0x10000>;
		ranges = <0x02000000 0x0 0xe0000000 0xc 0x10000000 0x0 0x10000000
			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
		pcie@0 {
			ranges = <0x02000000 0 0xe0000000
				  0x02000000 0 0xe0000000
				  0 0x10000000

				  0x01000000 0 0x00000000
				  0x01000000 0 0x00000000
				  0 0x00010000>;
		};
	};

	pci2: pcie@ffe260000 {
		reg = <0xf 0xfe260000 0 0x10000>;
		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
		pcie@0 {
			ranges = <0x02000000 0 0xe0000000
				  0x02000000 0 0xe0000000
				  0 0x10000000

				  0x01000000 0 0x00000000
				  0x01000000 0 0x00000000
				  0 0x00010000>;
		};
	};

	pci3: pcie@ffe270000 {
		reg = <0xf 0xfe270000 0 0x10000>;
		ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000
			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
		pcie@0 {
			ranges = <0x02000000 0 0xe0000000
				  0x02000000 0 0xe0000000
				  0 0x10000000

				  0x01000000 0 0x00000000
				  0x01000000 0 0x00000000
				  0 0x00010000>;
		};
	};

	qe: qe@ffe140000 {
		ranges = <0x0 0xf 0xfe140000 0x40000>;
		reg = <0xf 0xfe140000 0 0x480>;
		brg-frequency = <0>;
		bus-frequency = <0>;

		si1: si@700 {
			compatible = "fsl,t1040-qe-si";
			reg = <0x700 0x80>;
		};

		siram1: siram@1000 {
			compatible = "fsl,t1040-qe-siram";
			reg = <0x1000 0x800>;
		};

		ucc_hdlc: ucc@2000 {
			compatible = "fsl,ucc-hdlc";
			rx-clock-name = "clk8";
			tx-clock-name = "clk9";
			fsl,rx-sync-clock = "rsync_pin";
			fsl,tx-sync-clock = "tsync_pin";
			fsl,tx-timeslot-mask = <0xfffffffe>;
			fsl,rx-timeslot-mask = <0xfffffffe>;
			fsl,tdm-framer-type = "e1";
			fsl,tdm-id = <0>;
			fsl,siram-entry-id = <0>;
			fsl,tdm-interface;
		};

		ucc_serial: ucc@2200 {
			compatible = "fsl,t1040-ucc-uart";
			port-number = <0>;
			rx-clock-name = "brg2";
			tx-clock-name = "brg2";
		};
	};
};