162306a36Sopenharmony_ci// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 262306a36Sopenharmony_ci/* 362306a36Sopenharmony_ci * Device Tree Source for the RZ/G2UL Type-1 SMARC EVK board 462306a36Sopenharmony_ci * 562306a36Sopenharmony_ci * Copyright (C) 2022 Renesas Electronics Corp. 662306a36Sopenharmony_ci */ 762306a36Sopenharmony_ci 862306a36Sopenharmony_ci/dts-v1/; 962306a36Sopenharmony_ci 1062306a36Sopenharmony_ci/* 1162306a36Sopenharmony_ci * DIP-Switch SW1 setting 1262306a36Sopenharmony_ci * 1 : High; 0: Low 1362306a36Sopenharmony_ci * SW1-2 : SW_SD0_DEV_SEL (0: uSD; 1: eMMC) 1462306a36Sopenharmony_ci * SW1-3 : SW_ET0_EN_N (0: ETHER0; 1: CAN0, CAN1, SSI1, RSPI1) 1562306a36Sopenharmony_ci * Please change below macros according to SW1 setting on the SoM 1662306a36Sopenharmony_ci */ 1762306a36Sopenharmony_ci#define SW_SW0_DEV_SEL 1 1862306a36Sopenharmony_ci#define SW_ET0_EN_N 1 1962306a36Sopenharmony_ci 2062306a36Sopenharmony_ci/* 2162306a36Sopenharmony_ci * To enable MTU3a PWM on PMOD0, 2262306a36Sopenharmony_ci * - Set DIP-Switch SW1-3 to On position. 2362306a36Sopenharmony_ci * - Set PMOD_MTU3 macro to 1. 2462306a36Sopenharmony_ci */ 2562306a36Sopenharmony_ci#define PMOD_MTU3 0 2662306a36Sopenharmony_ci 2762306a36Sopenharmony_ci#if (PMOD_MTU3 && !SW_ET0_EN_N) 2862306a36Sopenharmony_ci#error "Cannot set as both PMOD_MTU3 and !SW_ET0_EN_N are mutually exclusive" 2962306a36Sopenharmony_ci#endif 3062306a36Sopenharmony_ci 3162306a36Sopenharmony_ci#include "r9a07g043u.dtsi" 3262306a36Sopenharmony_ci#include "rzg2ul-smarc-som.dtsi" 3362306a36Sopenharmony_ci#include "rzg2ul-smarc.dtsi" 3462306a36Sopenharmony_ci 3562306a36Sopenharmony_ci/ { 3662306a36Sopenharmony_ci model = "Renesas SMARC EVK based on r9a07g043u11"; 3762306a36Sopenharmony_ci compatible = "renesas,smarc-evk", "renesas,r9a07g043u11", "renesas,r9a07g043"; 3862306a36Sopenharmony_ci}; 39