xref: /kernel/linux/linux-6.6/scripts/dtc/include-prefixes/arm64/freescale/fsl-lx2160a-bluebox3.dts

// SPDX-License-Identifier: (GPL-2.0 OR MIT)
//
// Device Tree file for LX2160A BLUEBOX3
//
// Copyright 2020-2021 NXP

/dts-v1/;

#include "fsl-lx2160a.dtsi"

/ {
	model = "NXP Layerscape LX2160ABLUEBOX3";
	compatible = "fsl,lx2160a-bluebox3", "fsl,lx2160a";

	aliases {
		crypto = &crypto;
		mmc0 = &esdhc0;
		mmc1 = &esdhc1;
		serial0 = &uart0;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	sb_3v3: regulator-sb3v3 {
		compatible = "regulator-fixed";
		regulator-name = "MC34717-3.3VSB";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-boot-on;
		regulator-always-on;
	};
};

&can0 {
	status = "okay";

	can-transceiver {
		max-bitrate = <5000000>;
	};
};

&can1 {
	status = "okay";

	can-transceiver {
		max-bitrate = <5000000>;
	};
};

&crypto {
	status = "okay";
};

&dpmac5 {
	phy-handle = <&aqr113c_phy1>;
	phy-mode = "usxgmii";
	managed = "in-band-status";
};

&dpmac6 {
	phy-handle = <&aqr113c_phy2>;
	phy-mode = "usxgmii";
	managed = "in-band-status";
};

&dpmac9 {
	phy-handle = <&aqr113c_phy3>;
	phy-mode = "usxgmii";
	managed = "in-band-status";
};

&dpmac10 {
	phy-handle = <&aqr113c_phy4>;
	phy-mode = "usxgmii";
	managed = "in-band-status";
};

&dpmac17 {
	phy-mode = "rgmii";
	status = "okay";

	fixed-link {
		speed = <1000>;
		full-duplex;
	};
};

&dpmac18 {
	phy-mode = "rgmii";
	status = "okay";

	fixed-link {
		speed = <1000>;
		full-duplex;
	};
};

&emdio1 {
	status = "okay";

	aqr113c_phy2: ethernet-phy@0 {
		compatible = "ethernet-phy-ieee802.3-c45";
		reg = <0x0>;
		/* IRQ_10G_PHY2 */
		interrupts-extended = <&extirq 3 IRQ_TYPE_LEVEL_LOW>;
	};

	aqr113c_phy1: ethernet-phy@8 {
		compatible = "ethernet-phy-ieee802.3-c45";
		reg = <0x8>;
		/* IRQ_10G_PHY1 */
		interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>;
	};

	sw1_mii3_phy: ethernet-phy@5 {
		/* AR8035 */
		compatible = "ethernet-phy-id004d.d072";
		reg = <0x5>;
		interrupts-extended = <&extirq 6 IRQ_TYPE_LEVEL_LOW>;
	};

	sw2_mii3_phy: ethernet-phy@6 {
		/* AR8035 */
		compatible = "ethernet-phy-id004d.d072";
		reg = <0x6>;
		interrupts-extended = <&extirq 7 IRQ_TYPE_LEVEL_LOW>;
	};
};

&emdio2 {
	status = "okay";

	aqr113c_phy4: ethernet-phy@0 {
		compatible = "ethernet-phy-ieee802.3-c45";
		reg = <0x0>;
		/* IRQ_10G_PHY4 */
		interrupts-extended = <&extirq 5 IRQ_TYPE_LEVEL_LOW>;
	};

	aqr113c_phy3: ethernet-phy@8 {
		compatible = "ethernet-phy-ieee802.3-c45";
		reg = <0x8>;
		/* IRQ_10G_PHY3 */
		interrupts-extended = <&extirq 4 IRQ_TYPE_LEVEL_LOW>;
	};
};

&esdhc0 {
	sd-uhs-sdr104;
	sd-uhs-sdr50;
	sd-uhs-sdr25;
	sd-uhs-sdr12;
	status = "okay";
};

&esdhc1 {
	mmc-hs200-1_8v;
	mmc-hs400-1_8v;
	bus-width = <8>;
	status = "okay";
};

&fspi {
	status = "okay";

	mt35xu512aba0: flash@0 {
		compatible = "jedec,spi-nor";
		#address-cells = <1>;
		#size-cells = <1>;
		reg = <0>;
		m25p,fast-read;
		spi-max-frequency = <50000000>;
		spi-rx-bus-width = <8>;
		spi-tx-bus-width = <8>;
	};

	mt35xu512aba1: flash@1 {
		compatible = "jedec,spi-nor";
		#address-cells = <1>;
		#size-cells = <1>;
		reg = <1>;
		m25p,fast-read;
		spi-max-frequency = <50000000>;
		spi-rx-bus-width = <8>;
		spi-tx-bus-width = <8>;
	};
};

&i2c0 {
	status = "okay";

	i2c-mux@77 {
		compatible = "nxp,pca9547";
		reg = <0x77>;
		#address-cells = <1>;
		#size-cells = <0>;

		i2c@2 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x2>;

			power-monitor@40 {
				compatible = "ti,ina220";
				reg = <0x40>;
				shunt-resistor = <500>;
			};
		};

		i2c@3 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x3>;

			temp2: temperature-sensor@48 {
				compatible = "nxp,sa56004";
				reg = <0x48>;
				vcc-supply = <&sb_3v3>;
				#thermal-sensor-cells = <1>;
			};

			temp1: temperature-sensor@4c {
				compatible = "nxp,sa56004";
				reg = <0x4c>;
				vcc-supply = <&sb_3v3>;
				#thermal-sensor-cells = <1>;
			};
		};

		i2c@4 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x4>;

			rtc@51 {
				compatible = "nxp,pcf2129";
				reg = <0x51>;
				interrupts-extended = <&extirq 11 IRQ_TYPE_LEVEL_LOW>;
			};
		};

		i2c@7 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x7>;

			i2c-mux@75 {
				compatible = "nxp,pca9547";
				reg = <0x75>;
				#address-cells = <1>;
				#size-cells = <0>;

				i2c@0 {
					#address-cells = <1>;
					#size-cells = <0>;
					reg = <0x0>;

					spi_bridge: spi@28 {
						compatible = "nxp,sc18is602b";
						reg = <0x28>;
						#address-cells = <1>;
						#size-cells = <0>;
					};
				};
			};
		};
	};
};

&i2c5 {
	status = "okay";

	i2c-mux@77 {
		compatible = "nxp,pca9846";
		reg = <0x77>;
		#address-cells = <1>;
		#size-cells = <0>;

		i2c@1 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x1>;

			/* The I2C multiplexer and temperature sensors are on
			 * the T6 riser card.
			 */
			i2c-mux@70 {
				compatible = "nxp,pca9548";
				reg = <0x70>;
				#address-cells = <1>;
				#size-cells = <0>;

				i2c@6 {
					#address-cells = <1>;
					#size-cells = <0>;
					reg = <0x6>;

					q12: temperature-sensor@4c {
						compatible = "nxp,sa56004";
						reg = <0x4c>;
						vcc-supply = <&sb_3v3>;
						#thermal-sensor-cells = <1>;
					};
				};

				i2c@7 {
					#address-cells = <1>;
					#size-cells = <0>;
					reg = <0x7>;

					q11: temperature-sensor@4c {
						compatible = "nxp,sa56004";
						reg = <0x4c>;
						vcc-supply = <&sb_3v3>;
						#thermal-sensor-cells = <1>;
					};

					q13: temperature-sensor@48 {
						compatible = "nxp,sa56004";
						reg = <0x48>;
						vcc-supply = <&sb_3v3>;
						#thermal-sensor-cells = <1>;
					};

					q14: temperature-sensor@4a {
						compatible = "nxp,sa56004";
						reg = <0x4a>;
						vcc-supply = <&sb_3v3>;
						#thermal-sensor-cells = <1>;
					};
				};
			};
		};
	};
};

&pcs_mdio5 {
	status = "okay";
};

&pcs_mdio6 {
	status = "okay";
};

&pcs_mdio9 {
	status = "okay";
};

&pcs_mdio10 {
	status = "okay";
};

&spi_bridge {
	sw1: ethernet-switch@0 {
		compatible = "nxp,sja1110a";
		reg = <0>;
		spi-max-frequency = <4000000>;
		spi-cpol;
		dsa,member = <0 0>;

		ethernet-ports {
			#address-cells = <1>;
			#size-cells = <0>;

			/* Microcontroller port */
			port@0 {
				reg = <0>;
				status = "disabled";
			};

			/* SW1_P1 */
			port@1 {
				reg = <1>;
				label = "con_2x20";
				phy-mode = "sgmii";

				fixed-link {
					speed = <1000>;
					full-duplex;
				};
			};

			port@2 {
				reg = <2>;
				ethernet = <&dpmac17>;
				phy-mode = "rgmii-id";
				rx-internal-delay-ps = <2000>;
				tx-internal-delay-ps = <2000>;

				fixed-link {
					speed = <1000>;
					full-duplex;
				};
			};

			port@3 {
				reg = <3>;
				label = "1ge_p1";
				phy-mode = "rgmii-id";
				phy-handle = <&sw1_mii3_phy>;
			};

			sw1p4: port@4 {
				reg = <4>;
				link = <&sw2p1>;
				phy-mode = "sgmii";

				fixed-link {
					speed = <1000>;
					full-duplex;
				};
			};

			port@5 {
				reg = <5>;
				label = "trx1";
				phy-mode = "internal";
				phy-handle = <&sw1_port5_base_t1_phy>;
			};

			port@6 {
				reg = <6>;
				label = "trx2";
				phy-mode = "internal";
				phy-handle = <&sw1_port6_base_t1_phy>;
			};

			port@7 {
				reg = <7>;
				label = "trx3";
				phy-mode = "internal";
				phy-handle = <&sw1_port7_base_t1_phy>;
			};

			port@8 {
				reg = <8>;
				label = "trx4";
				phy-mode = "internal";
				phy-handle = <&sw1_port8_base_t1_phy>;
			};

			port@9 {
				reg = <9>;
				label = "trx5";
				phy-mode = "internal";
				phy-handle = <&sw1_port9_base_t1_phy>;
			};

			port@a {
				reg = <10>;
				label = "trx6";
				phy-mode = "internal";
				phy-handle = <&sw1_port10_base_t1_phy>;
			};
		};

		mdios {
			#address-cells = <1>;
			#size-cells = <0>;

			mdio@0 {
				compatible = "nxp,sja1110-base-t1-mdio";
				#address-cells = <1>;
				#size-cells = <0>;
				reg = <0>;

				sw1_port5_base_t1_phy: ethernet-phy@1 {
					compatible = "ethernet-phy-ieee802.3-c45";
					reg = <0x1>;
				};

				sw1_port6_base_t1_phy: ethernet-phy@2 {
					compatible = "ethernet-phy-ieee802.3-c45";
					reg = <0x2>;
				};

				sw1_port7_base_t1_phy: ethernet-phy@3 {
					compatible = "ethernet-phy-ieee802.3-c45";
					reg = <0x3>;
				};

				sw1_port8_base_t1_phy: ethernet-phy@4 {
					compatible = "ethernet-phy-ieee802.3-c45";
					reg = <0x4>;
				};

				sw1_port9_base_t1_phy: ethernet-phy@5 {
					compatible = "ethernet-phy-ieee802.3-c45";
					reg = <0x5>;
				};

				sw1_port10_base_t1_phy: ethernet-phy@6 {
					compatible = "ethernet-phy-ieee802.3-c45";
					reg = <0x6>;
				};
			};
		};
	};

	sw2: ethernet-switch@2 {
		compatible = "nxp,sja1110a";
		reg = <2>;
		spi-max-frequency = <4000000>;
		spi-cpol;
		dsa,member = <0 1>;

		ethernet-ports {
			#address-cells = <1>;
			#size-cells = <0>;

			/* Microcontroller port */
			port@0 {
				reg = <0>;
				status = "disabled";
			};

			sw2p1: port@1 {
				reg = <1>;
				link = <&sw1p4>;
				phy-mode = "sgmii";

				fixed-link {
					speed = <1000>;
					full-duplex;
				};
			};

			port@2 {
				reg = <2>;
				ethernet = <&dpmac18>;
				phy-mode = "rgmii-id";
				rx-internal-delay-ps = <2000>;
				tx-internal-delay-ps = <2000>;

				fixed-link {
					speed = <1000>;
					full-duplex;
				};
			};

			port@3 {
				reg = <3>;
				label = "1ge_p2";
				phy-mode = "rgmii-id";
				phy-handle = <&sw2_mii3_phy>;
			};

			port@4 {
				reg = <4>;
				label = "to_sw3";
				phy-mode = "2500base-x";

				fixed-link {
					speed = <2500>;
					full-duplex;
				};
			};

			port@5 {
				reg = <5>;
				label = "trx7";
				phy-mode = "internal";
				phy-handle = <&sw2_port5_base_t1_phy>;
			};

			port@6 {
				reg = <6>;
				label = "trx8";
				phy-mode = "internal";
				phy-handle = <&sw2_port6_base_t1_phy>;
			};

			port@7 {
				reg = <7>;
				label = "trx9";
				phy-mode = "internal";
				phy-handle = <&sw2_port7_base_t1_phy>;
			};

			port@8 {
				reg = <8>;
				label = "trx10";
				phy-mode = "internal";
				phy-handle = <&sw2_port8_base_t1_phy>;
			};

			port@9 {
				reg = <9>;
				label = "trx11";
				phy-mode = "internal";
				phy-handle = <&sw2_port9_base_t1_phy>;
			};

			port@a {
				reg = <10>;
				label = "trx12";
				phy-mode = "internal";
				phy-handle = <&sw2_port10_base_t1_phy>;
			};
		};

		mdios {
			#address-cells = <1>;
			#size-cells = <0>;

			mdio@0 {
				compatible = "nxp,sja1110-base-t1-mdio";
				#address-cells = <1>;
				#size-cells = <0>;
				reg = <0>;

				sw2_port5_base_t1_phy: ethernet-phy@1 {
					compatible = "ethernet-phy-ieee802.3-c45";
					reg = <0x1>;
				};

				sw2_port6_base_t1_phy: ethernet-phy@2 {
					compatible = "ethernet-phy-ieee802.3-c45";
					reg = <0x2>;
				};

				sw2_port7_base_t1_phy: ethernet-phy@3 {
					compatible = "ethernet-phy-ieee802.3-c45";
					reg = <0x3>;
				};

				sw2_port8_base_t1_phy: ethernet-phy@4 {
					compatible = "ethernet-phy-ieee802.3-c45";
					reg = <0x4>;
				};

				sw2_port9_base_t1_phy: ethernet-phy@5 {
					compatible = "ethernet-phy-ieee802.3-c45";
					reg = <0x5>;
				};

				sw2_port10_base_t1_phy: ethernet-phy@6 {
					compatible = "ethernet-phy-ieee802.3-c45";
					reg = <0x6>;
				};
			};
		};
	};
};

&uart0 {
	status = "okay";
};

&uart1 {
	status = "okay";
};

&usb0 {
	status = "okay";
};

&usb1 {
	status = "okay";
};