xref: /kernel/linux/linux-6.6/include/scsi/libsas.h (revision 62306a36)
1/* SPDX-License-Identifier: GPL-2.0-only */
2/*
3 * SAS host prototypes and structures header file
4 *
5 * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
6 * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
7 */
8
9#ifndef _LIBSAS_H_
10#define _LIBSAS_H_
11
12
13#include <linux/timer.h>
14#include <linux/pci.h>
15#include <scsi/sas.h>
16#include <linux/libata.h>
17#include <linux/list.h>
18#include <scsi/scsi_device.h>
19#include <scsi/scsi_cmnd.h>
20#include <scsi/scsi_transport_sas.h>
21#include <linux/scatterlist.h>
22#include <linux/slab.h>
23
24struct block_device;
25
26enum sas_phy_role {
27	PHY_ROLE_NONE = 0,
28	PHY_ROLE_TARGET = 0x40,
29	PHY_ROLE_INITIATOR = 0x80,
30};
31
32/* The events are mnemonically described in sas_dump.c
33 * so when updating/adding events here, please also
34 * update the other file too.
35 */
36enum port_event {
37	PORTE_BYTES_DMAED     = 0U,
38	PORTE_BROADCAST_RCVD,
39	PORTE_LINK_RESET_ERR,
40	PORTE_TIMER_EVENT,
41	PORTE_HARD_RESET,
42	PORT_NUM_EVENTS,
43};
44
45enum phy_event {
46	PHYE_LOSS_OF_SIGNAL   = 0U,
47	PHYE_OOB_DONE,
48	PHYE_OOB_ERROR,
49	PHYE_SPINUP_HOLD,             /* hot plug SATA, no COMWAKE sent */
50	PHYE_RESUME_TIMEOUT,
51	PHYE_SHUTDOWN,
52	PHY_NUM_EVENTS,
53};
54
55enum discover_event {
56	DISCE_DISCOVER_DOMAIN   = 0U,
57	DISCE_REVALIDATE_DOMAIN,
58	DISCE_SUSPEND,
59	DISCE_RESUME,
60	DISC_NUM_EVENTS,
61};
62
63/* ---------- Expander Devices ---------- */
64
65#define to_dom_device(_obj) container_of(_obj, struct domain_device, dev_obj)
66#define to_dev_attr(_attr)  container_of(_attr, struct domain_dev_attribute,\
67					 attr)
68
69enum routing_attribute {
70	DIRECT_ROUTING,
71	SUBTRACTIVE_ROUTING,
72	TABLE_ROUTING,
73};
74
75enum ex_phy_state {
76	PHY_EMPTY,
77	PHY_VACANT,
78	PHY_NOT_PRESENT,
79	PHY_DEVICE_DISCOVERED
80};
81
82struct ex_phy {
83	int    phy_id;
84
85	enum ex_phy_state phy_state;
86
87	enum sas_device_type attached_dev_type;
88	enum sas_linkrate linkrate;
89
90	u8   attached_sata_host:1;
91	u8   attached_sata_dev:1;
92	u8   attached_sata_ps:1;
93
94	enum sas_protocol attached_tproto;
95	enum sas_protocol attached_iproto;
96
97	u8   attached_sas_addr[SAS_ADDR_SIZE];
98	u8   attached_phy_id;
99
100	int phy_change_count;
101	enum routing_attribute routing_attr;
102	u8   virtual:1;
103
104	int  last_da_index;
105
106	struct sas_phy *phy;
107	struct sas_port *port;
108};
109
110struct expander_device {
111	struct list_head children;
112
113	int    ex_change_count;
114	u16    max_route_indexes;
115	u8     num_phys;
116
117	u8     t2t_supp:1;
118	u8     configuring:1;
119	u8     conf_route_table:1;
120
121	u8     enclosure_logical_id[8];
122
123	struct ex_phy *ex_phy;
124	struct sas_port *parent_port;
125
126	struct mutex cmd_mutex;
127};
128
129/* ---------- SATA device ---------- */
130#define ATA_RESP_FIS_SIZE 24
131
132struct sata_device {
133	unsigned int class;
134	u8     port_no;        /* port number, if this is a PM (Port) */
135
136	struct ata_port *ap;
137	struct ata_host *ata_host;
138	struct smp_rps_resp rps_resp ____cacheline_aligned; /* report_phy_sata_resp */
139	u8     fis[ATA_RESP_FIS_SIZE];
140};
141
142struct ssp_device {
143	struct list_head eh_list_node; /* pending a user requested eh action */
144	struct scsi_lun reset_lun;
145};
146
147enum {
148	SAS_DEV_GONE,
149	SAS_DEV_FOUND, /* device notified to lldd */
150	SAS_DEV_DESTROY,
151	SAS_DEV_EH_PENDING,
152	SAS_DEV_LU_RESET,
153	SAS_DEV_RESET,
154};
155
156struct domain_device {
157	spinlock_t done_lock;
158	enum sas_device_type dev_type;
159
160	enum sas_linkrate linkrate;
161	enum sas_linkrate min_linkrate;
162	enum sas_linkrate max_linkrate;
163
164	int  pathways;
165
166	struct domain_device *parent;
167	struct list_head siblings; /* devices on the same level */
168	struct asd_sas_port *port;        /* shortcut to root of the tree */
169	struct sas_phy *phy;
170
171	struct list_head dev_list_node;
172	struct list_head disco_list_node; /* awaiting probe or destruct */
173
174	enum sas_protocol    iproto;
175	enum sas_protocol    tproto;
176
177	struct sas_rphy *rphy;
178
179	u8  sas_addr[SAS_ADDR_SIZE];
180	u8  hashed_sas_addr[HASHED_SAS_ADDR_SIZE];
181
182	u8  frame_rcvd[32];
183
184	union {
185		struct expander_device ex_dev;
186		struct sata_device     sata_dev; /* STP & directly attached */
187		struct ssp_device      ssp_dev;
188	};
189
190	void *lldd_dev;
191	unsigned long state;
192	struct kref kref;
193};
194
195struct sas_work {
196	struct list_head drain_node;
197	struct work_struct work;
198};
199
200static inline bool dev_is_expander(enum sas_device_type type)
201{
202	return type == SAS_EDGE_EXPANDER_DEVICE ||
203	       type == SAS_FANOUT_EXPANDER_DEVICE;
204}
205
206static inline void INIT_SAS_WORK(struct sas_work *sw, void (*fn)(struct work_struct *))
207{
208	INIT_WORK(&sw->work, fn);
209	INIT_LIST_HEAD(&sw->drain_node);
210}
211
212struct sas_discovery_event {
213	struct sas_work work;
214	struct asd_sas_port *port;
215};
216
217static inline struct sas_discovery_event *to_sas_discovery_event(struct work_struct *work)
218{
219	struct sas_discovery_event *ev = container_of(work, typeof(*ev), work.work);
220
221	return ev;
222}
223
224struct sas_discovery {
225	struct sas_discovery_event disc_work[DISC_NUM_EVENTS];
226	unsigned long    pending;
227	u8     fanout_sas_addr[SAS_ADDR_SIZE];
228	u8     eeds_a[SAS_ADDR_SIZE];
229	u8     eeds_b[SAS_ADDR_SIZE];
230	int    max_level;
231};
232
233/* The port struct is Class:RW, driver:RO */
234struct asd_sas_port {
235/* private: */
236	struct sas_discovery disc;
237	struct domain_device *port_dev;
238	spinlock_t dev_list_lock;
239	struct list_head dev_list;
240	struct list_head disco_list;
241	struct list_head destroy_list;
242	struct list_head sas_port_del_list;
243	enum   sas_linkrate linkrate;
244
245	struct sas_work work;
246	int suspended;
247
248/* public: */
249	int id;
250
251	u8               sas_addr[SAS_ADDR_SIZE];
252	u8               attached_sas_addr[SAS_ADDR_SIZE];
253	enum sas_protocol   iproto;
254	enum sas_protocol   tproto;
255
256	enum sas_oob_mode oob_mode;
257
258	spinlock_t       phy_list_lock;
259	struct list_head phy_list;
260	int              num_phys;
261	u32              phy_mask;
262
263	struct sas_ha_struct *ha;
264
265	struct sas_port	*port;
266
267	void *lldd_port;	  /* not touched by the sas class code */
268};
269
270struct asd_sas_event {
271	struct sas_work work;
272	struct asd_sas_phy *phy;
273	int event;
274};
275
276static inline struct asd_sas_event *to_asd_sas_event(struct work_struct *work)
277{
278	struct asd_sas_event *ev = container_of(work, typeof(*ev), work.work);
279
280	return ev;
281}
282
283static inline void INIT_SAS_EVENT(struct asd_sas_event *ev,
284		void (*fn)(struct work_struct *),
285		struct asd_sas_phy *phy, int event)
286{
287	INIT_SAS_WORK(&ev->work, fn);
288	ev->phy = phy;
289	ev->event = event;
290}
291
292#define SAS_PHY_SHUTDOWN_THRES   1024
293
294/* The phy pretty much is controlled by the LLDD.
295 * The class only reads those fields.
296 */
297struct asd_sas_phy {
298/* private: */
299	atomic_t event_nr;
300	int in_shutdown;
301	int error;
302	int suspended;
303
304	struct sas_phy *phy;
305
306/* public: */
307	/* The following are class:RO, driver:R/W */
308	int            enabled;	  /* must be set */
309
310	int            id;	  /* must be set */
311	enum sas_protocol iproto;
312	enum sas_protocol tproto;
313
314	enum sas_phy_role  role;
315	enum sas_oob_mode  oob_mode;
316	enum sas_linkrate linkrate;
317
318	u8   *sas_addr;		  /* must be set */
319	u8   attached_sas_addr[SAS_ADDR_SIZE]; /* class:RO, driver: R/W */
320
321	spinlock_t     frame_rcvd_lock;
322	u8             *frame_rcvd; /* must be set */
323	int            frame_rcvd_size;
324
325	spinlock_t     sas_prim_lock;
326	u32            sas_prim;
327
328	struct list_head port_phy_el; /* driver:RO */
329	struct asd_sas_port      *port; /* Class:RW, driver: RO */
330
331	struct sas_ha_struct *ha; /* may be set; the class sets it anyway */
332
333	void *lldd_phy;		  /* not touched by the sas_class_code */
334};
335
336enum sas_ha_state {
337	SAS_HA_REGISTERED,
338	SAS_HA_DRAINING,
339	SAS_HA_ATA_EH_ACTIVE,
340	SAS_HA_FROZEN,
341	SAS_HA_RESUMING,
342};
343
344struct sas_ha_struct {
345/* private: */
346	struct list_head  defer_q; /* work queued while draining */
347	struct mutex	  drain_mutex;
348	unsigned long	  state;
349	spinlock_t	  lock;
350	int		  eh_active;
351	wait_queue_head_t eh_wait_q;
352	struct list_head  eh_dev_q;
353
354	struct mutex disco_mutex;
355
356	struct Scsi_Host *shost;
357
358/* public: */
359	char *sas_ha_name;
360	struct device *dev;	  /* should be set */
361
362	struct workqueue_struct *event_q;
363	struct workqueue_struct *disco_q;
364
365	u8 *sas_addr;		  /* must be set */
366	u8 hashed_sas_addr[HASHED_SAS_ADDR_SIZE];
367
368	spinlock_t      phy_port_lock;
369	struct asd_sas_phy  **sas_phy; /* array of valid pointers, must be set */
370	struct asd_sas_port **sas_port; /* array of valid pointers, must be set */
371	int             num_phys; /* must be set, gt 0, static */
372
373	int strict_wide_ports; /* both sas_addr and attached_sas_addr must match
374				* their siblings when forming wide ports */
375
376	void *lldd_ha;		  /* not touched by sas class code */
377
378	struct list_head eh_done_q;  /* complete via scsi_eh_flush_done_q */
379	struct list_head eh_ata_q; /* scmds to promote from sas to ata eh */
380
381	int event_thres;
382};
383
384#define SHOST_TO_SAS_HA(_shost) (*(struct sas_ha_struct **)(_shost)->hostdata)
385
386static inline struct domain_device *
387starget_to_domain_dev(struct scsi_target *starget) {
388	return starget->hostdata;
389}
390
391static inline struct domain_device *
392sdev_to_domain_dev(struct scsi_device *sdev) {
393	return starget_to_domain_dev(sdev->sdev_target);
394}
395
396static inline struct ata_device *sas_to_ata_dev(struct domain_device *dev)
397{
398	return &dev->sata_dev.ap->link.device[0];
399}
400
401static inline struct domain_device *
402cmd_to_domain_dev(struct scsi_cmnd *cmd)
403{
404	return sdev_to_domain_dev(cmd->device);
405}
406
407void sas_hash_addr(u8 *hashed, const u8 *sas_addr);
408
409/* Before calling a notify event, LLDD should use this function
410 * when the link is severed (possibly from its tasklet).
411 * The idea is that the Class only reads those, while the LLDD,
412 * can R/W these (thus avoiding a race).
413 */
414static inline void sas_phy_disconnected(struct asd_sas_phy *phy)
415{
416	phy->oob_mode = OOB_NOT_CONNECTED;
417	phy->linkrate = SAS_LINK_RATE_UNKNOWN;
418}
419
420static inline unsigned int to_sas_gpio_od(int device, int bit)
421{
422	return 3 * device + bit;
423}
424
425static inline void sas_put_local_phy(struct sas_phy *phy)
426{
427	put_device(&phy->dev);
428}
429
430#ifdef CONFIG_SCSI_SAS_HOST_SMP
431int try_test_sas_gpio_gp_bit(unsigned int od, u8 *data, u8 index, u8 count);
432#else
433static inline int try_test_sas_gpio_gp_bit(unsigned int od, u8 *data, u8 index, u8 count)
434{
435	return -1;
436}
437#endif
438
439/* ---------- Tasks ---------- */
440/*
441      service_response |  SAS_TASK_COMPLETE  |  SAS_TASK_UNDELIVERED |
442  exec_status          |                     |                       |
443  ---------------------+---------------------+-----------------------+
444       SAM_...         |         X           |                       |
445       DEV_NO_RESPONSE |         X           |           X           |
446       INTERRUPTED     |         X           |                       |
447       QUEUE_FULL      |                     |           X           |
448       DEVICE_UNKNOWN  |                     |           X           |
449       SG_ERR          |                     |           X           |
450  ---------------------+---------------------+-----------------------+
451 */
452
453enum service_response {
454	SAS_TASK_COMPLETE,
455	SAS_TASK_UNDELIVERED = -1,
456};
457
458enum exec_status {
459	/*
460	 * Values 0..0x7f are used to return the SAM_STAT_* codes.  To avoid
461	 * 'case value not in enumerated type' compiler warnings every value
462	 * returned through the exec_status enum needs an alias with the SAS_
463	 * prefix here.
464	 */
465	SAS_SAM_STAT_GOOD = SAM_STAT_GOOD,
466	SAS_SAM_STAT_BUSY = SAM_STAT_BUSY,
467	SAS_SAM_STAT_TASK_ABORTED = SAM_STAT_TASK_ABORTED,
468	SAS_SAM_STAT_CHECK_CONDITION = SAM_STAT_CHECK_CONDITION,
469
470	SAS_DEV_NO_RESPONSE = 0x80,
471	SAS_DATA_UNDERRUN,
472	SAS_DATA_OVERRUN,
473	SAS_INTERRUPTED,
474	SAS_QUEUE_FULL,
475	SAS_DEVICE_UNKNOWN,
476	SAS_OPEN_REJECT,
477	SAS_OPEN_TO,
478	SAS_PROTO_RESPONSE,
479	SAS_PHY_DOWN,
480	SAS_NAK_R_ERR,
481	SAS_PENDING,
482	SAS_ABORTED_TASK,
483};
484
485/* When a task finishes with a response, the LLDD examines the
486 * response:
487 *	- For an ATA task task_status_struct::stat is set to
488 * SAS_PROTO_RESPONSE, and the task_status_struct::buf is set to the
489 * contents of struct ata_task_resp.
490 *	- For SSP tasks, if no data is present or status/TMF response
491 * is valid, task_status_struct::stat is set.  If data is present
492 * (SENSE data), the LLDD copies up to SAS_STATUS_BUF_SIZE, sets
493 * task_status_struct::buf_valid_size, and task_status_struct::stat is
494 * set to SAM_CHECK_COND.
495 *
496 * "buf" has format SCSI Sense for SSP task, or struct ata_task_resp
497 * for ATA task.
498 *
499 * "frame_len" is the total frame length, which could be more or less
500 * than actually copied.
501 *
502 * Tasks ending with response, always set the residual field.
503 */
504struct ata_task_resp {
505	u16  frame_len;
506	u8   ending_fis[ATA_RESP_FIS_SIZE];	  /* dev to host or data-in */
507};
508
509#define SAS_STATUS_BUF_SIZE 96
510
511struct task_status_struct {
512	enum service_response resp;
513	enum exec_status      stat;
514	int  buf_valid_size;
515
516	u8   buf[SAS_STATUS_BUF_SIZE];
517
518	u32  residual;
519	enum sas_open_rej_reason open_rej_reason;
520};
521
522/* ATA and ATAPI task queuable to a SAS LLDD.
523 */
524struct sas_ata_task {
525	struct host_to_dev_fis fis;
526	u8     atapi_packet[16];  /* 0 if not ATAPI task */
527
528	u8     dma_xfer:1;	  /* PIO:0 or DMA:1 */
529	u8     use_ncq:1;
530	u8     return_fis_on_success:1;
531
532	u8     device_control_reg_update:1;
533
534	bool   force_phy;
535	int    force_phy_id;
536};
537
538/* LLDDs rely on these values */
539enum sas_internal_abort {
540	SAS_INTERNAL_ABORT_SINGLE	= 0,
541	SAS_INTERNAL_ABORT_DEV		= 1,
542};
543
544struct sas_internal_abort_task {
545	enum sas_internal_abort type;
546	unsigned int qid;
547	u16 tag;
548};
549
550struct sas_smp_task {
551	struct scatterlist smp_req;
552	struct scatterlist smp_resp;
553};
554
555enum task_attribute {
556	TASK_ATTR_SIMPLE = 0,
557	TASK_ATTR_HOQ    = 1,
558	TASK_ATTR_ORDERED= 2,
559	TASK_ATTR_ACA    = 4,
560};
561
562struct sas_ssp_task {
563	u8     LUN[8];
564	enum   task_attribute task_attr;
565	struct scsi_cmnd *cmd;
566};
567
568struct sas_tmf_task {
569	u8 tmf;
570	u16 tag_of_task_to_be_managed;
571};
572
573struct sas_task {
574	struct domain_device *dev;
575
576	spinlock_t   task_state_lock;
577	unsigned     task_state_flags;
578
579	enum   sas_protocol      task_proto;
580
581	union {
582		struct sas_ata_task ata_task;
583		struct sas_smp_task smp_task;
584		struct sas_ssp_task ssp_task;
585		struct sas_internal_abort_task abort_task;
586	};
587
588	struct scatterlist *scatter;
589	int    num_scatter;
590	u32    total_xfer_len;
591	u8     data_dir:2;	  /* Use PCI_DMA_... */
592
593	struct task_status_struct task_status;
594	void   (*task_done)(struct sas_task *);
595
596	void   *lldd_task;	  /* for use by LLDDs */
597	void   *uldd_task;
598	struct sas_task_slow *slow_task;
599	struct sas_tmf_task *tmf;
600};
601
602struct sas_task_slow {
603	/* standard/extra infrastructure for slow path commands (SMP and
604	 * internal lldd commands
605	 */
606	struct timer_list     timer;
607	struct completion     completion;
608	struct sas_task       *task;
609};
610
611#define SAS_TASK_STATE_PENDING      1
612#define SAS_TASK_STATE_DONE         2
613#define SAS_TASK_STATE_ABORTED      4
614#define SAS_TASK_NEED_DEV_RESET     8
615
616static inline bool sas_is_internal_abort(struct sas_task *task)
617{
618	return task->task_proto == SAS_PROTOCOL_INTERNAL_ABORT;
619}
620
621static inline struct request *sas_task_find_rq(struct sas_task *task)
622{
623	struct scsi_cmnd *scmd;
624
625	if (task->task_proto & SAS_PROTOCOL_STP_ALL) {
626		struct ata_queued_cmd *qc = task->uldd_task;
627
628		scmd = qc ? qc->scsicmd : NULL;
629	} else {
630		scmd = task->uldd_task;
631	}
632
633	if (!scmd)
634		return NULL;
635
636	return scsi_cmd_to_rq(scmd);
637}
638
639struct sas_domain_function_template {
640	/* The class calls these to notify the LLDD of an event. */
641	void (*lldd_port_formed)(struct asd_sas_phy *);
642	void (*lldd_port_deformed)(struct asd_sas_phy *);
643
644	/* The class calls these when a device is found or gone. */
645	int  (*lldd_dev_found)(struct domain_device *);
646	void (*lldd_dev_gone)(struct domain_device *);
647
648	int (*lldd_execute_task)(struct sas_task *, gfp_t gfp_flags);
649
650	/* Task Management Functions. Must be called from process context. */
651	int (*lldd_abort_task)(struct sas_task *);
652	int (*lldd_abort_task_set)(struct domain_device *, u8 *lun);
653	int (*lldd_clear_task_set)(struct domain_device *, u8 *lun);
654	int (*lldd_I_T_nexus_reset)(struct domain_device *);
655	int (*lldd_ata_check_ready)(struct domain_device *);
656	void (*lldd_ata_set_dmamode)(struct domain_device *);
657	int (*lldd_lu_reset)(struct domain_device *, u8 *lun);
658	int (*lldd_query_task)(struct sas_task *);
659
660	/* Special TMF callbacks */
661	void (*lldd_tmf_exec_complete)(struct domain_device *dev);
662	void (*lldd_tmf_aborted)(struct sas_task *task);
663	bool (*lldd_abort_timeout)(struct sas_task *task, void *data);
664
665	/* Port and Adapter management */
666	int (*lldd_clear_nexus_port)(struct asd_sas_port *);
667	int (*lldd_clear_nexus_ha)(struct sas_ha_struct *);
668
669	/* Phy management */
670	int (*lldd_control_phy)(struct asd_sas_phy *, enum phy_func, void *);
671
672	/* GPIO support */
673	int (*lldd_write_gpio)(struct sas_ha_struct *, u8 reg_type,
674			       u8 reg_index, u8 reg_count, u8 *write_data);
675};
676
677extern int sas_register_ha(struct sas_ha_struct *);
678extern int sas_unregister_ha(struct sas_ha_struct *);
679extern void sas_prep_resume_ha(struct sas_ha_struct *sas_ha);
680extern void sas_resume_ha(struct sas_ha_struct *sas_ha);
681extern void sas_resume_ha_no_sync(struct sas_ha_struct *sas_ha);
682extern void sas_suspend_ha(struct sas_ha_struct *sas_ha);
683
684int sas_set_phy_speed(struct sas_phy *phy, struct sas_phy_linkrates *rates);
685int sas_phy_reset(struct sas_phy *phy, int hard_reset);
686int sas_phy_enable(struct sas_phy *phy, int enable);
687extern int sas_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
688extern int sas_target_alloc(struct scsi_target *);
689extern int sas_slave_configure(struct scsi_device *);
690extern int sas_change_queue_depth(struct scsi_device *, int new_depth);
691extern int sas_bios_param(struct scsi_device *, struct block_device *,
692			  sector_t capacity, int *hsc);
693int sas_execute_internal_abort_single(struct domain_device *device,
694				      u16 tag, unsigned int qid,
695				      void *data);
696int sas_execute_internal_abort_dev(struct domain_device *device,
697				   unsigned int qid, void *data);
698extern struct scsi_transport_template *
699sas_domain_attach_transport(struct sas_domain_function_template *);
700extern struct device_attribute dev_attr_phy_event_threshold;
701
702int  sas_discover_root_expander(struct domain_device *);
703
704int  sas_ex_revalidate_domain(struct domain_device *);
705
706void sas_unregister_domain_devices(struct asd_sas_port *port, int gone);
707void sas_init_disc(struct sas_discovery *disc, struct asd_sas_port *);
708void sas_discover_event(struct asd_sas_port *, enum discover_event ev);
709
710int  sas_discover_end_dev(struct domain_device *);
711
712void sas_unregister_dev(struct asd_sas_port *port, struct domain_device *);
713
714void sas_init_dev(struct domain_device *);
715
716void sas_task_abort(struct sas_task *);
717int sas_eh_abort_handler(struct scsi_cmnd *cmd);
718int sas_eh_device_reset_handler(struct scsi_cmnd *cmd);
719int sas_eh_target_reset_handler(struct scsi_cmnd *cmd);
720
721extern void sas_target_destroy(struct scsi_target *);
722extern int sas_slave_alloc(struct scsi_device *);
723extern int sas_ioctl(struct scsi_device *sdev, unsigned int cmd,
724		     void __user *arg);
725extern int sas_drain_work(struct sas_ha_struct *ha);
726
727extern void sas_ssp_task_response(struct device *dev, struct sas_task *task,
728				  struct ssp_response_iu *iu);
729struct sas_phy *sas_get_local_phy(struct domain_device *dev);
730
731int sas_request_addr(struct Scsi_Host *shost, u8 *addr);
732
733int sas_abort_task_set(struct domain_device *dev, u8 *lun);
734int sas_clear_task_set(struct domain_device *dev, u8 *lun);
735int sas_lu_reset(struct domain_device *dev, u8 *lun);
736int sas_query_task(struct sas_task *task, u16 tag);
737int sas_abort_task(struct sas_task *task, u16 tag);
738int sas_find_attached_phy_id(struct expander_device *ex_dev,
739			     struct domain_device *dev);
740
741void sas_notify_port_event(struct asd_sas_phy *phy, enum port_event event,
742			   gfp_t gfp_flags);
743void sas_notify_phy_event(struct asd_sas_phy *phy, enum phy_event event,
744			   gfp_t gfp_flags);
745
746#endif /* _SASLIB_H_ */
747