1// SPDX-License-Identifier: GPL-2.0 2 3#include "fs.h" 4#include "messages.h" 5#include "discard.h" 6#include "transaction.h" 7#include "space-info.h" 8#include "super.h" 9 10#ifdef CONFIG_PRINTK 11 12#define STATE_STRING_PREFACE ": state " 13#define STATE_STRING_BUF_LEN (sizeof(STATE_STRING_PREFACE) + BTRFS_FS_STATE_COUNT + 1) 14 15/* 16 * Characters to print to indicate error conditions or uncommon filesystem state. 17 * RO is not an error. 18 */ 19static const char fs_state_chars[] = { 20 [BTRFS_FS_STATE_REMOUNTING] = 'M', 21 [BTRFS_FS_STATE_RO] = 0, 22 [BTRFS_FS_STATE_TRANS_ABORTED] = 'A', 23 [BTRFS_FS_STATE_DEV_REPLACING] = 'R', 24 [BTRFS_FS_STATE_DUMMY_FS_INFO] = 0, 25 [BTRFS_FS_STATE_NO_CSUMS] = 'C', 26 [BTRFS_FS_STATE_LOG_CLEANUP_ERROR] = 'L', 27}; 28 29static void btrfs_state_to_string(const struct btrfs_fs_info *info, char *buf) 30{ 31 unsigned int bit; 32 bool states_printed = false; 33 unsigned long fs_state = READ_ONCE(info->fs_state); 34 char *curr = buf; 35 36 memcpy(curr, STATE_STRING_PREFACE, sizeof(STATE_STRING_PREFACE)); 37 curr += sizeof(STATE_STRING_PREFACE) - 1; 38 39 if (BTRFS_FS_ERROR(info)) { 40 *curr++ = 'E'; 41 states_printed = true; 42 } 43 44 for_each_set_bit(bit, &fs_state, sizeof(fs_state)) { 45 WARN_ON_ONCE(bit >= BTRFS_FS_STATE_COUNT); 46 if ((bit < BTRFS_FS_STATE_COUNT) && fs_state_chars[bit]) { 47 *curr++ = fs_state_chars[bit]; 48 states_printed = true; 49 } 50 } 51 52 /* If no states were printed, reset the buffer */ 53 if (!states_printed) 54 curr = buf; 55 56 *curr++ = 0; 57} 58#endif 59 60/* 61 * Generally the error codes correspond to their respective errors, but there 62 * are a few special cases. 63 * 64 * EUCLEAN: Any sort of corruption that we encounter. The tree-checker for 65 * instance will return EUCLEAN if any of the blocks are corrupted in 66 * a way that is problematic. We want to reserve EUCLEAN for these 67 * sort of corruptions. 68 * 69 * EROFS: If we check BTRFS_FS_STATE_ERROR and fail out with a return error, we 70 * need to use EROFS for this case. We will have no idea of the 71 * original failure, that will have been reported at the time we tripped 72 * over the error. Each subsequent error that doesn't have any context 73 * of the original error should use EROFS when handling BTRFS_FS_STATE_ERROR. 74 */ 75const char * __attribute_const__ btrfs_decode_error(int errno) 76{ 77 char *errstr = "unknown"; 78 79 switch (errno) { 80 case -ENOENT: /* -2 */ 81 errstr = "No such entry"; 82 break; 83 case -EIO: /* -5 */ 84 errstr = "IO failure"; 85 break; 86 case -ENOMEM: /* -12*/ 87 errstr = "Out of memory"; 88 break; 89 case -EEXIST: /* -17 */ 90 errstr = "Object already exists"; 91 break; 92 case -ENOSPC: /* -28 */ 93 errstr = "No space left"; 94 break; 95 case -EROFS: /* -30 */ 96 errstr = "Readonly filesystem"; 97 break; 98 case -EOPNOTSUPP: /* -95 */ 99 errstr = "Operation not supported"; 100 break; 101 case -EUCLEAN: /* -117 */ 102 errstr = "Filesystem corrupted"; 103 break; 104 case -EDQUOT: /* -122 */ 105 errstr = "Quota exceeded"; 106 break; 107 } 108 109 return errstr; 110} 111 112/* 113 * __btrfs_handle_fs_error decodes expected errors from the caller and 114 * invokes the appropriate error response. 115 */ 116__cold 117void __btrfs_handle_fs_error(struct btrfs_fs_info *fs_info, const char *function, 118 unsigned int line, int errno, const char *fmt, ...) 119{ 120 struct super_block *sb = fs_info->sb; 121#ifdef CONFIG_PRINTK 122 char statestr[STATE_STRING_BUF_LEN]; 123 const char *errstr; 124#endif 125 126#ifdef CONFIG_PRINTK_INDEX 127 printk_index_subsys_emit( 128 "BTRFS: error (device %s%s) in %s:%d: errno=%d %s", KERN_CRIT, fmt); 129#endif 130 131 /* 132 * Special case: if the error is EROFS, and we're already under 133 * SB_RDONLY, then it is safe here. 134 */ 135 if (errno == -EROFS && sb_rdonly(sb)) 136 return; 137 138#ifdef CONFIG_PRINTK 139 errstr = btrfs_decode_error(errno); 140 btrfs_state_to_string(fs_info, statestr); 141 if (fmt) { 142 struct va_format vaf; 143 va_list args; 144 145 va_start(args, fmt); 146 vaf.fmt = fmt; 147 vaf.va = &args; 148 149 pr_crit("BTRFS: error (device %s%s) in %s:%d: errno=%d %s (%pV)\n", 150 sb->s_id, statestr, function, line, errno, errstr, &vaf); 151 va_end(args); 152 } else { 153 pr_crit("BTRFS: error (device %s%s) in %s:%d: errno=%d %s\n", 154 sb->s_id, statestr, function, line, errno, errstr); 155 } 156#endif 157 158 /* 159 * Today we only save the error info to memory. Long term we'll also 160 * send it down to the disk. 161 */ 162 WRITE_ONCE(fs_info->fs_error, errno); 163 164 /* Don't go through full error handling during mount. */ 165 if (!(sb->s_flags & SB_BORN)) 166 return; 167 168 if (sb_rdonly(sb)) 169 return; 170 171 btrfs_discard_stop(fs_info); 172 173 /* Handle error by forcing the filesystem readonly. */ 174 btrfs_set_sb_rdonly(sb); 175 btrfs_info(fs_info, "forced readonly"); 176 /* 177 * Note that a running device replace operation is not canceled here 178 * although there is no way to update the progress. It would add the 179 * risk of a deadlock, therefore the canceling is omitted. The only 180 * penalty is that some I/O remains active until the procedure 181 * completes. The next time when the filesystem is mounted writable 182 * again, the device replace operation continues. 183 */ 184} 185 186#ifdef CONFIG_PRINTK 187static const char * const logtypes[] = { 188 "emergency", 189 "alert", 190 "critical", 191 "error", 192 "warning", 193 "notice", 194 "info", 195 "debug", 196}; 197 198/* 199 * Use one ratelimit state per log level so that a flood of less important 200 * messages doesn't cause more important ones to be dropped. 201 */ 202static struct ratelimit_state printk_limits[] = { 203 RATELIMIT_STATE_INIT(printk_limits[0], DEFAULT_RATELIMIT_INTERVAL, 100), 204 RATELIMIT_STATE_INIT(printk_limits[1], DEFAULT_RATELIMIT_INTERVAL, 100), 205 RATELIMIT_STATE_INIT(printk_limits[2], DEFAULT_RATELIMIT_INTERVAL, 100), 206 RATELIMIT_STATE_INIT(printk_limits[3], DEFAULT_RATELIMIT_INTERVAL, 100), 207 RATELIMIT_STATE_INIT(printk_limits[4], DEFAULT_RATELIMIT_INTERVAL, 100), 208 RATELIMIT_STATE_INIT(printk_limits[5], DEFAULT_RATELIMIT_INTERVAL, 100), 209 RATELIMIT_STATE_INIT(printk_limits[6], DEFAULT_RATELIMIT_INTERVAL, 100), 210 RATELIMIT_STATE_INIT(printk_limits[7], DEFAULT_RATELIMIT_INTERVAL, 100), 211}; 212 213void __cold _btrfs_printk(const struct btrfs_fs_info *fs_info, const char *fmt, ...) 214{ 215 char lvl[PRINTK_MAX_SINGLE_HEADER_LEN + 1] = "\0"; 216 struct va_format vaf; 217 va_list args; 218 int kern_level; 219 const char *type = logtypes[4]; 220 struct ratelimit_state *ratelimit = &printk_limits[4]; 221 222#ifdef CONFIG_PRINTK_INDEX 223 printk_index_subsys_emit("%sBTRFS %s (device %s): ", NULL, fmt); 224#endif 225 226 va_start(args, fmt); 227 228 while ((kern_level = printk_get_level(fmt)) != 0) { 229 size_t size = printk_skip_level(fmt) - fmt; 230 231 if (kern_level >= '0' && kern_level <= '7') { 232 memcpy(lvl, fmt, size); 233 lvl[size] = '\0'; 234 type = logtypes[kern_level - '0']; 235 ratelimit = &printk_limits[kern_level - '0']; 236 } 237 fmt += size; 238 } 239 240 vaf.fmt = fmt; 241 vaf.va = &args; 242 243 if (__ratelimit(ratelimit)) { 244 if (fs_info) { 245 char statestr[STATE_STRING_BUF_LEN]; 246 247 btrfs_state_to_string(fs_info, statestr); 248 _printk("%sBTRFS %s (device %s%s): %pV\n", lvl, type, 249 fs_info->sb->s_id, statestr, &vaf); 250 } else { 251 _printk("%sBTRFS %s: %pV\n", lvl, type, &vaf); 252 } 253 } 254 255 va_end(args); 256} 257#endif 258 259#if BITS_PER_LONG == 32 260void __cold btrfs_warn_32bit_limit(struct btrfs_fs_info *fs_info) 261{ 262 if (!test_and_set_bit(BTRFS_FS_32BIT_WARN, &fs_info->flags)) { 263 btrfs_warn(fs_info, "reaching 32bit limit for logical addresses"); 264 btrfs_warn(fs_info, 265"due to page cache limit on 32bit systems, btrfs can't access metadata at or beyond %lluT", 266 BTRFS_32BIT_MAX_FILE_SIZE >> 40); 267 btrfs_warn(fs_info, 268 "please consider upgrading to 64bit kernel/hardware"); 269 } 270} 271 272void __cold btrfs_err_32bit_limit(struct btrfs_fs_info *fs_info) 273{ 274 if (!test_and_set_bit(BTRFS_FS_32BIT_ERROR, &fs_info->flags)) { 275 btrfs_err(fs_info, "reached 32bit limit for logical addresses"); 276 btrfs_err(fs_info, 277"due to page cache limit on 32bit systems, metadata beyond %lluT can't be accessed", 278 BTRFS_32BIT_MAX_FILE_SIZE >> 40); 279 btrfs_err(fs_info, 280 "please consider upgrading to 64bit kernel/hardware"); 281 } 282} 283#endif 284 285/* 286 * __btrfs_panic decodes unexpected, fatal errors from the caller, issues an 287 * alert, and either panics or BUGs, depending on mount options. 288 */ 289__cold 290void __btrfs_panic(struct btrfs_fs_info *fs_info, const char *function, 291 unsigned int line, int errno, const char *fmt, ...) 292{ 293 char *s_id = "<unknown>"; 294 const char *errstr; 295 struct va_format vaf = { .fmt = fmt }; 296 va_list args; 297 298 if (fs_info) 299 s_id = fs_info->sb->s_id; 300 301 va_start(args, fmt); 302 vaf.va = &args; 303 304 errstr = btrfs_decode_error(errno); 305 if (fs_info && (btrfs_test_opt(fs_info, PANIC_ON_FATAL_ERROR))) 306 panic(KERN_CRIT "BTRFS panic (device %s) in %s:%d: %pV (errno=%d %s)\n", 307 s_id, function, line, &vaf, errno, errstr); 308 309 btrfs_crit(fs_info, "panic in %s:%d: %pV (errno=%d %s)", 310 function, line, &vaf, errno, errstr); 311 va_end(args); 312 /* Caller calls BUG() */ 313} 314