1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Copyright (C) 2003-2008 Takahiro Hirofuchi
4 * Copyright (C) 2015-2016 Nobuo Iwata
5 */
6
7#include <linux/init.h>
8#include <linux/file.h>
9#include <linux/kernel.h>
10#include <linux/kthread.h>
11#include <linux/module.h>
12#include <linux/platform_device.h>
13#include <linux/slab.h>
14
15#include "usbip_common.h"
16#include "vhci.h"
17
18#define DRIVER_AUTHOR "Takahiro Hirofuchi"
19#define DRIVER_DESC "USB/IP 'Virtual' Host Controller (VHCI) Driver"
20
21/*
22 * TODO
23 *	- update root hub emulation
24 *	- move the emulation code to userland ?
25 *		porting to other operating systems
26 *		minimize kernel code
27 *	- add suspend/resume code
28 *	- clean up everything
29 */
30
31/* See usb gadget dummy hcd */
32
33static int vhci_hub_status(struct usb_hcd *hcd, char *buff);
34static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
35			    u16 wIndex, char *buff, u16 wLength);
36static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
37			    gfp_t mem_flags);
38static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status);
39static int vhci_start(struct usb_hcd *vhci_hcd);
40static void vhci_stop(struct usb_hcd *hcd);
41static int vhci_get_frame_number(struct usb_hcd *hcd);
42
43static const char driver_name[] = "vhci_hcd";
44static const char driver_desc[] = "USB/IP Virtual Host Controller";
45
46int vhci_num_controllers = VHCI_NR_HCS;
47struct vhci *vhcis;
48
49static const char * const bit_desc[] = {
50	"CONNECTION",		/*0*/
51	"ENABLE",		/*1*/
52	"SUSPEND",		/*2*/
53	"OVER_CURRENT",		/*3*/
54	"RESET",		/*4*/
55	"L1",			/*5*/
56	"R6",			/*6*/
57	"R7",			/*7*/
58	"POWER",		/*8*/
59	"LOWSPEED",		/*9*/
60	"HIGHSPEED",		/*10*/
61	"PORT_TEST",		/*11*/
62	"INDICATOR",		/*12*/
63	"R13",			/*13*/
64	"R14",			/*14*/
65	"R15",			/*15*/
66	"C_CONNECTION",		/*16*/
67	"C_ENABLE",		/*17*/
68	"C_SUSPEND",		/*18*/
69	"C_OVER_CURRENT",	/*19*/
70	"C_RESET",		/*20*/
71	"C_L1",			/*21*/
72	"R22",			/*22*/
73	"R23",			/*23*/
74	"R24",			/*24*/
75	"R25",			/*25*/
76	"R26",			/*26*/
77	"R27",			/*27*/
78	"R28",			/*28*/
79	"R29",			/*29*/
80	"R30",			/*30*/
81	"R31",			/*31*/
82};
83
84static const char * const bit_desc_ss[] = {
85	"CONNECTION",		/*0*/
86	"ENABLE",		/*1*/
87	"SUSPEND",		/*2*/
88	"OVER_CURRENT",		/*3*/
89	"RESET",		/*4*/
90	"L1",			/*5*/
91	"R6",			/*6*/
92	"R7",			/*7*/
93	"R8",			/*8*/
94	"POWER",		/*9*/
95	"HIGHSPEED",		/*10*/
96	"PORT_TEST",		/*11*/
97	"INDICATOR",		/*12*/
98	"R13",			/*13*/
99	"R14",			/*14*/
100	"R15",			/*15*/
101	"C_CONNECTION",		/*16*/
102	"C_ENABLE",		/*17*/
103	"C_SUSPEND",		/*18*/
104	"C_OVER_CURRENT",	/*19*/
105	"C_RESET",		/*20*/
106	"C_BH_RESET",		/*21*/
107	"C_LINK_STATE",		/*22*/
108	"C_CONFIG_ERROR",	/*23*/
109	"R24",			/*24*/
110	"R25",			/*25*/
111	"R26",			/*26*/
112	"R27",			/*27*/
113	"R28",			/*28*/
114	"R29",			/*29*/
115	"R30",			/*30*/
116	"R31",			/*31*/
117};
118
119static void dump_port_status_diff(u32 prev_status, u32 new_status, bool usb3)
120{
121	int i = 0;
122	u32 bit = 1;
123	const char * const *desc = bit_desc;
124
125	if (usb3)
126		desc = bit_desc_ss;
127
128	pr_debug("status prev -> new: %08x -> %08x\n", prev_status, new_status);
129	while (bit) {
130		u32 prev = prev_status & bit;
131		u32 new = new_status & bit;
132		char change;
133
134		if (!prev && new)
135			change = '+';
136		else if (prev && !new)
137			change = '-';
138		else
139			change = ' ';
140
141		if (prev || new) {
142			pr_debug(" %c%s\n", change, desc[i]);
143
144			if (bit == 1) /* USB_PORT_STAT_CONNECTION */
145				pr_debug(" %c%s\n", change, "USB_PORT_STAT_SPEED_5GBPS");
146		}
147		bit <<= 1;
148		i++;
149	}
150	pr_debug("\n");
151}
152
153void rh_port_connect(struct vhci_device *vdev, enum usb_device_speed speed)
154{
155	struct vhci_hcd	*vhci_hcd = vdev_to_vhci_hcd(vdev);
156	struct vhci *vhci = vhci_hcd->vhci;
157	int		rhport = vdev->rhport;
158	u32		status;
159	unsigned long	flags;
160
161	usbip_dbg_vhci_rh("rh_port_connect %d\n", rhport);
162
163	spin_lock_irqsave(&vhci->lock, flags);
164
165	status = vhci_hcd->port_status[rhport];
166
167	status |= USB_PORT_STAT_CONNECTION | (1 << USB_PORT_FEAT_C_CONNECTION);
168
169	switch (speed) {
170	case USB_SPEED_HIGH:
171		status |= USB_PORT_STAT_HIGH_SPEED;
172		break;
173	case USB_SPEED_LOW:
174		status |= USB_PORT_STAT_LOW_SPEED;
175		break;
176	default:
177		break;
178	}
179
180	vhci_hcd->port_status[rhport] = status;
181
182	spin_unlock_irqrestore(&vhci->lock, flags);
183
184	usb_hcd_poll_rh_status(vhci_hcd_to_hcd(vhci_hcd));
185}
186
187static void rh_port_disconnect(struct vhci_device *vdev)
188{
189	struct vhci_hcd	*vhci_hcd = vdev_to_vhci_hcd(vdev);
190	struct vhci *vhci = vhci_hcd->vhci;
191	int		rhport = vdev->rhport;
192	u32		status;
193	unsigned long	flags;
194
195	usbip_dbg_vhci_rh("rh_port_disconnect %d\n", rhport);
196
197	spin_lock_irqsave(&vhci->lock, flags);
198
199	status = vhci_hcd->port_status[rhport];
200
201	status &= ~USB_PORT_STAT_CONNECTION;
202	status |= (1 << USB_PORT_FEAT_C_CONNECTION);
203
204	vhci_hcd->port_status[rhport] = status;
205
206	spin_unlock_irqrestore(&vhci->lock, flags);
207	usb_hcd_poll_rh_status(vhci_hcd_to_hcd(vhci_hcd));
208}
209
210#define PORT_C_MASK				\
211	((USB_PORT_STAT_C_CONNECTION		\
212	  | USB_PORT_STAT_C_ENABLE		\
213	  | USB_PORT_STAT_C_SUSPEND		\
214	  | USB_PORT_STAT_C_OVERCURRENT		\
215	  | USB_PORT_STAT_C_RESET) << 16)
216
217/*
218 * Returns 0 if the status hasn't changed, or the number of bytes in buf.
219 * Ports are 0-indexed from the HCD point of view,
220 * and 1-indexed from the USB core pointer of view.
221 *
222 * @buf: a bitmap to show which port status has been changed.
223 *  bit  0: reserved
224 *  bit  1: the status of port 0 has been changed.
225 *  bit  2: the status of port 1 has been changed.
226 *  ...
227 */
228static int vhci_hub_status(struct usb_hcd *hcd, char *buf)
229{
230	struct vhci_hcd	*vhci_hcd = hcd_to_vhci_hcd(hcd);
231	struct vhci *vhci = vhci_hcd->vhci;
232	int		retval = DIV_ROUND_UP(VHCI_HC_PORTS + 1, 8);
233	int		rhport;
234	int		changed = 0;
235	unsigned long	flags;
236
237	memset(buf, 0, retval);
238
239	spin_lock_irqsave(&vhci->lock, flags);
240	if (!HCD_HW_ACCESSIBLE(hcd)) {
241		usbip_dbg_vhci_rh("hw accessible flag not on?\n");
242		goto done;
243	}
244
245	/* check pseudo status register for each port */
246	for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) {
247		if ((vhci_hcd->port_status[rhport] & PORT_C_MASK)) {
248			/* The status of a port has been changed, */
249			usbip_dbg_vhci_rh("port %d status changed\n", rhport);
250
251			buf[(rhport + 1) / 8] |= 1 << (rhport + 1) % 8;
252			changed = 1;
253		}
254	}
255
256	if ((hcd->state == HC_STATE_SUSPENDED) && (changed == 1))
257		usb_hcd_resume_root_hub(hcd);
258
259done:
260	spin_unlock_irqrestore(&vhci->lock, flags);
261	return changed ? retval : 0;
262}
263
264/* usb 3.0 root hub device descriptor */
265static struct {
266	struct usb_bos_descriptor bos;
267	struct usb_ss_cap_descriptor ss_cap;
268} __packed usb3_bos_desc = {
269
270	.bos = {
271		.bLength		= USB_DT_BOS_SIZE,
272		.bDescriptorType	= USB_DT_BOS,
273		.wTotalLength		= cpu_to_le16(sizeof(usb3_bos_desc)),
274		.bNumDeviceCaps		= 1,
275	},
276	.ss_cap = {
277		.bLength		= USB_DT_USB_SS_CAP_SIZE,
278		.bDescriptorType	= USB_DT_DEVICE_CAPABILITY,
279		.bDevCapabilityType	= USB_SS_CAP_TYPE,
280		.wSpeedSupported	= cpu_to_le16(USB_5GBPS_OPERATION),
281		.bFunctionalitySupport	= ilog2(USB_5GBPS_OPERATION),
282	},
283};
284
285static inline void
286ss_hub_descriptor(struct usb_hub_descriptor *desc)
287{
288	memset(desc, 0, sizeof *desc);
289	desc->bDescriptorType = USB_DT_SS_HUB;
290	desc->bDescLength = 12;
291	desc->wHubCharacteristics = cpu_to_le16(
292		HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_COMMON_OCPM);
293	desc->bNbrPorts = VHCI_HC_PORTS;
294	desc->u.ss.bHubHdrDecLat = 0x04; /* Worst case: 0.4 micro sec*/
295	desc->u.ss.DeviceRemovable = 0xffff;
296}
297
298static inline void hub_descriptor(struct usb_hub_descriptor *desc)
299{
300	int width;
301
302	memset(desc, 0, sizeof(*desc));
303	desc->bDescriptorType = USB_DT_HUB;
304	desc->wHubCharacteristics = cpu_to_le16(
305		HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_COMMON_OCPM);
306
307	desc->bNbrPorts = VHCI_HC_PORTS;
308	BUILD_BUG_ON(VHCI_HC_PORTS > USB_MAXCHILDREN);
309	width = desc->bNbrPorts / 8 + 1;
310	desc->bDescLength = USB_DT_HUB_NONVAR_SIZE + 2 * width;
311	memset(&desc->u.hs.DeviceRemovable[0], 0, width);
312	memset(&desc->u.hs.DeviceRemovable[width], 0xff, width);
313}
314
315static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
316			    u16 wIndex, char *buf, u16 wLength)
317{
318	struct vhci_hcd	*vhci_hcd;
319	struct vhci	*vhci;
320	int             retval = 0;
321	int		rhport = -1;
322	unsigned long	flags;
323	bool invalid_rhport = false;
324
325	u32 prev_port_status[VHCI_HC_PORTS];
326
327	if (!HCD_HW_ACCESSIBLE(hcd))
328		return -ETIMEDOUT;
329
330	/*
331	 * NOTE:
332	 * wIndex (bits 0-7) shows the port number and begins from 1?
333	 */
334	wIndex = ((__u8)(wIndex & 0x00ff));
335	usbip_dbg_vhci_rh("typeReq %x wValue %x wIndex %x\n", typeReq, wValue,
336			  wIndex);
337
338	/*
339	 * wIndex can be 0 for some request types (typeReq). rhport is
340	 * in valid range when wIndex >= 1 and < VHCI_HC_PORTS.
341	 *
342	 * Reference port_status[] only with valid rhport when
343	 * invalid_rhport is false.
344	 */
345	if (wIndex < 1 || wIndex > VHCI_HC_PORTS) {
346		invalid_rhport = true;
347		if (wIndex > VHCI_HC_PORTS)
348			pr_err("invalid port number %d\n", wIndex);
349	} else
350		rhport = wIndex - 1;
351
352	vhci_hcd = hcd_to_vhci_hcd(hcd);
353	vhci = vhci_hcd->vhci;
354
355	spin_lock_irqsave(&vhci->lock, flags);
356
357	/* store old status and compare now and old later */
358	if (usbip_dbg_flag_vhci_rh) {
359		if (!invalid_rhport)
360			memcpy(prev_port_status, vhci_hcd->port_status,
361				sizeof(prev_port_status));
362	}
363
364	switch (typeReq) {
365	case ClearHubFeature:
366		usbip_dbg_vhci_rh(" ClearHubFeature\n");
367		break;
368	case ClearPortFeature:
369		if (invalid_rhport) {
370			pr_err("invalid port number %d\n", wIndex);
371			goto error;
372		}
373		switch (wValue) {
374		case USB_PORT_FEAT_SUSPEND:
375			if (hcd->speed == HCD_USB3) {
376				pr_err(" ClearPortFeature: USB_PORT_FEAT_SUSPEND req not "
377				       "supported for USB 3.0 roothub\n");
378				goto error;
379			}
380			usbip_dbg_vhci_rh(
381				" ClearPortFeature: USB_PORT_FEAT_SUSPEND\n");
382			if (vhci_hcd->port_status[rhport] & USB_PORT_STAT_SUSPEND) {
383				/* 20msec signaling */
384				vhci_hcd->resuming = 1;
385				vhci_hcd->re_timeout = jiffies + msecs_to_jiffies(20);
386			}
387			break;
388		case USB_PORT_FEAT_POWER:
389			usbip_dbg_vhci_rh(
390				" ClearPortFeature: USB_PORT_FEAT_POWER\n");
391			if (hcd->speed == HCD_USB3)
392				vhci_hcd->port_status[rhport] &= ~USB_SS_PORT_STAT_POWER;
393			else
394				vhci_hcd->port_status[rhport] &= ~USB_PORT_STAT_POWER;
395			break;
396		default:
397			usbip_dbg_vhci_rh(" ClearPortFeature: default %x\n",
398					  wValue);
399			if (wValue >= 32)
400				goto error;
401			vhci_hcd->port_status[rhport] &= ~(1 << wValue);
402			break;
403		}
404		break;
405	case GetHubDescriptor:
406		usbip_dbg_vhci_rh(" GetHubDescriptor\n");
407		if (hcd->speed == HCD_USB3 &&
408				(wLength < USB_DT_SS_HUB_SIZE ||
409				 wValue != (USB_DT_SS_HUB << 8))) {
410			pr_err("Wrong hub descriptor type for USB 3.0 roothub.\n");
411			goto error;
412		}
413		if (hcd->speed == HCD_USB3)
414			ss_hub_descriptor((struct usb_hub_descriptor *) buf);
415		else
416			hub_descriptor((struct usb_hub_descriptor *) buf);
417		break;
418	case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
419		if (hcd->speed != HCD_USB3)
420			goto error;
421
422		if ((wValue >> 8) != USB_DT_BOS)
423			goto error;
424
425		memcpy(buf, &usb3_bos_desc, sizeof(usb3_bos_desc));
426		retval = sizeof(usb3_bos_desc);
427		break;
428	case GetHubStatus:
429		usbip_dbg_vhci_rh(" GetHubStatus\n");
430		*(__le32 *) buf = cpu_to_le32(0);
431		break;
432	case GetPortStatus:
433		usbip_dbg_vhci_rh(" GetPortStatus port %x\n", wIndex);
434		if (invalid_rhport) {
435			pr_err("invalid port number %d\n", wIndex);
436			retval = -EPIPE;
437			goto error;
438		}
439
440		/* we do not care about resume. */
441
442		/* whoever resets or resumes must GetPortStatus to
443		 * complete it!!
444		 */
445		if (vhci_hcd->resuming && time_after(jiffies, vhci_hcd->re_timeout)) {
446			vhci_hcd->port_status[rhport] |= (1 << USB_PORT_FEAT_C_SUSPEND);
447			vhci_hcd->port_status[rhport] &= ~(1 << USB_PORT_FEAT_SUSPEND);
448			vhci_hcd->resuming = 0;
449			vhci_hcd->re_timeout = 0;
450		}
451
452		if ((vhci_hcd->port_status[rhport] & (1 << USB_PORT_FEAT_RESET)) !=
453		    0 && time_after(jiffies, vhci_hcd->re_timeout)) {
454			vhci_hcd->port_status[rhport] |= (1 << USB_PORT_FEAT_C_RESET);
455			vhci_hcd->port_status[rhport] &= ~(1 << USB_PORT_FEAT_RESET);
456			vhci_hcd->re_timeout = 0;
457
458			/*
459			 * A few drivers do usb reset during probe when
460			 * the device could be in VDEV_ST_USED state
461			 */
462			if (vhci_hcd->vdev[rhport].ud.status ==
463				VDEV_ST_NOTASSIGNED ||
464			    vhci_hcd->vdev[rhport].ud.status ==
465				VDEV_ST_USED) {
466				usbip_dbg_vhci_rh(
467					" enable rhport %d (status %u)\n",
468					rhport,
469					vhci_hcd->vdev[rhport].ud.status);
470				vhci_hcd->port_status[rhport] |=
471					USB_PORT_STAT_ENABLE;
472			}
473
474			if (hcd->speed < HCD_USB3) {
475				switch (vhci_hcd->vdev[rhport].speed) {
476				case USB_SPEED_HIGH:
477					vhci_hcd->port_status[rhport] |=
478					      USB_PORT_STAT_HIGH_SPEED;
479					break;
480				case USB_SPEED_LOW:
481					vhci_hcd->port_status[rhport] |=
482						USB_PORT_STAT_LOW_SPEED;
483					break;
484				default:
485					pr_err("vhci_device speed not set\n");
486					break;
487				}
488			}
489		}
490		((__le16 *) buf)[0] = cpu_to_le16(vhci_hcd->port_status[rhport]);
491		((__le16 *) buf)[1] =
492			cpu_to_le16(vhci_hcd->port_status[rhport] >> 16);
493
494		usbip_dbg_vhci_rh(" GetPortStatus bye %x %x\n", ((u16 *)buf)[0],
495				  ((u16 *)buf)[1]);
496		break;
497	case SetHubFeature:
498		usbip_dbg_vhci_rh(" SetHubFeature\n");
499		retval = -EPIPE;
500		break;
501	case SetPortFeature:
502		switch (wValue) {
503		case USB_PORT_FEAT_LINK_STATE:
504			usbip_dbg_vhci_rh(
505				" SetPortFeature: USB_PORT_FEAT_LINK_STATE\n");
506			if (hcd->speed != HCD_USB3) {
507				pr_err("USB_PORT_FEAT_LINK_STATE req not "
508				       "supported for USB 2.0 roothub\n");
509				goto error;
510			}
511			/*
512			 * Since this is dummy we don't have an actual link so
513			 * there is nothing to do for the SET_LINK_STATE cmd
514			 */
515			break;
516		case USB_PORT_FEAT_U1_TIMEOUT:
517			usbip_dbg_vhci_rh(
518				" SetPortFeature: USB_PORT_FEAT_U1_TIMEOUT\n");
519			fallthrough;
520		case USB_PORT_FEAT_U2_TIMEOUT:
521			usbip_dbg_vhci_rh(
522				" SetPortFeature: USB_PORT_FEAT_U2_TIMEOUT\n");
523			/* TODO: add suspend/resume support! */
524			if (hcd->speed != HCD_USB3) {
525				pr_err("USB_PORT_FEAT_U1/2_TIMEOUT req not "
526				       "supported for USB 2.0 roothub\n");
527				goto error;
528			}
529			break;
530		case USB_PORT_FEAT_SUSPEND:
531			usbip_dbg_vhci_rh(
532				" SetPortFeature: USB_PORT_FEAT_SUSPEND\n");
533			/* Applicable only for USB2.0 hub */
534			if (hcd->speed == HCD_USB3) {
535				pr_err("USB_PORT_FEAT_SUSPEND req not "
536				       "supported for USB 3.0 roothub\n");
537				goto error;
538			}
539
540			if (invalid_rhport) {
541				pr_err("invalid port number %d\n", wIndex);
542				goto error;
543			}
544
545			vhci_hcd->port_status[rhport] |= USB_PORT_STAT_SUSPEND;
546			break;
547		case USB_PORT_FEAT_POWER:
548			usbip_dbg_vhci_rh(
549				" SetPortFeature: USB_PORT_FEAT_POWER\n");
550			if (invalid_rhport) {
551				pr_err("invalid port number %d\n", wIndex);
552				goto error;
553			}
554			if (hcd->speed == HCD_USB3)
555				vhci_hcd->port_status[rhport] |= USB_SS_PORT_STAT_POWER;
556			else
557				vhci_hcd->port_status[rhport] |= USB_PORT_STAT_POWER;
558			break;
559		case USB_PORT_FEAT_BH_PORT_RESET:
560			usbip_dbg_vhci_rh(
561				" SetPortFeature: USB_PORT_FEAT_BH_PORT_RESET\n");
562			if (invalid_rhport) {
563				pr_err("invalid port number %d\n", wIndex);
564				goto error;
565			}
566			/* Applicable only for USB3.0 hub */
567			if (hcd->speed != HCD_USB3) {
568				pr_err("USB_PORT_FEAT_BH_PORT_RESET req not "
569				       "supported for USB 2.0 roothub\n");
570				goto error;
571			}
572			fallthrough;
573		case USB_PORT_FEAT_RESET:
574			usbip_dbg_vhci_rh(
575				" SetPortFeature: USB_PORT_FEAT_RESET\n");
576			if (invalid_rhport) {
577				pr_err("invalid port number %d\n", wIndex);
578				goto error;
579			}
580			/* if it's already enabled, disable */
581			if (hcd->speed == HCD_USB3) {
582				vhci_hcd->port_status[rhport] = 0;
583				vhci_hcd->port_status[rhport] =
584					(USB_SS_PORT_STAT_POWER |
585					 USB_PORT_STAT_CONNECTION |
586					 USB_PORT_STAT_RESET);
587			} else if (vhci_hcd->port_status[rhport] & USB_PORT_STAT_ENABLE) {
588				vhci_hcd->port_status[rhport] &= ~(USB_PORT_STAT_ENABLE
589					| USB_PORT_STAT_LOW_SPEED
590					| USB_PORT_STAT_HIGH_SPEED);
591			}
592
593			/* 50msec reset signaling */
594			vhci_hcd->re_timeout = jiffies + msecs_to_jiffies(50);
595			fallthrough;
596		default:
597			usbip_dbg_vhci_rh(" SetPortFeature: default %d\n",
598					  wValue);
599			if (invalid_rhport) {
600				pr_err("invalid port number %d\n", wIndex);
601				goto error;
602			}
603			if (wValue >= 32)
604				goto error;
605			if (hcd->speed == HCD_USB3) {
606				if ((vhci_hcd->port_status[rhport] &
607				     USB_SS_PORT_STAT_POWER) != 0) {
608					vhci_hcd->port_status[rhport] |= (1 << wValue);
609				}
610			} else
611				if ((vhci_hcd->port_status[rhport] &
612				     USB_PORT_STAT_POWER) != 0) {
613					vhci_hcd->port_status[rhport] |= (1 << wValue);
614				}
615		}
616		break;
617	case GetPortErrorCount:
618		usbip_dbg_vhci_rh(" GetPortErrorCount\n");
619		if (hcd->speed != HCD_USB3) {
620			pr_err("GetPortErrorCount req not "
621			       "supported for USB 2.0 roothub\n");
622			goto error;
623		}
624		/* We'll always return 0 since this is a dummy hub */
625		*(__le32 *) buf = cpu_to_le32(0);
626		break;
627	case SetHubDepth:
628		usbip_dbg_vhci_rh(" SetHubDepth\n");
629		if (hcd->speed != HCD_USB3) {
630			pr_err("SetHubDepth req not supported for "
631			       "USB 2.0 roothub\n");
632			goto error;
633		}
634		break;
635	default:
636		pr_err("default hub control req: %04x v%04x i%04x l%d\n",
637			typeReq, wValue, wIndex, wLength);
638error:
639		/* "protocol stall" on error */
640		retval = -EPIPE;
641	}
642
643	if (usbip_dbg_flag_vhci_rh) {
644		pr_debug("port %d\n", rhport);
645		/* Only dump valid port status */
646		if (!invalid_rhport) {
647			dump_port_status_diff(prev_port_status[rhport],
648					      vhci_hcd->port_status[rhport],
649					      hcd->speed == HCD_USB3);
650		}
651	}
652	usbip_dbg_vhci_rh(" bye\n");
653
654	spin_unlock_irqrestore(&vhci->lock, flags);
655
656	if (!invalid_rhport &&
657	    (vhci_hcd->port_status[rhport] & PORT_C_MASK) != 0) {
658		usb_hcd_poll_rh_status(hcd);
659	}
660
661	return retval;
662}
663
664static void vhci_tx_urb(struct urb *urb, struct vhci_device *vdev)
665{
666	struct vhci_priv *priv;
667	struct vhci_hcd *vhci_hcd = vdev_to_vhci_hcd(vdev);
668	unsigned long flags;
669
670	priv = kzalloc(sizeof(struct vhci_priv), GFP_ATOMIC);
671	if (!priv) {
672		usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_MALLOC);
673		return;
674	}
675
676	spin_lock_irqsave(&vdev->priv_lock, flags);
677
678	priv->seqnum = atomic_inc_return(&vhci_hcd->seqnum);
679	if (priv->seqnum == 0xffff)
680		dev_info(&urb->dev->dev, "seqnum max\n");
681
682	priv->vdev = vdev;
683	priv->urb = urb;
684
685	urb->hcpriv = (void *) priv;
686
687	list_add_tail(&priv->list, &vdev->priv_tx);
688
689	wake_up(&vdev->waitq_tx);
690	spin_unlock_irqrestore(&vdev->priv_lock, flags);
691}
692
693static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
694{
695	struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd);
696	struct vhci *vhci = vhci_hcd->vhci;
697	struct device *dev = &urb->dev->dev;
698	u8 portnum = urb->dev->portnum;
699	int ret = 0;
700	struct vhci_device *vdev;
701	unsigned long flags;
702
703	if (portnum > VHCI_HC_PORTS) {
704		pr_err("invalid port number %d\n", portnum);
705		return -ENODEV;
706	}
707	vdev = &vhci_hcd->vdev[portnum-1];
708
709	if (!urb->transfer_buffer && !urb->num_sgs &&
710	     urb->transfer_buffer_length) {
711		dev_dbg(dev, "Null URB transfer buffer\n");
712		return -EINVAL;
713	}
714
715	spin_lock_irqsave(&vhci->lock, flags);
716
717	if (urb->status != -EINPROGRESS) {
718		dev_err(dev, "URB already unlinked!, status %d\n", urb->status);
719		spin_unlock_irqrestore(&vhci->lock, flags);
720		return urb->status;
721	}
722
723	/* refuse enqueue for dead connection */
724	spin_lock(&vdev->ud.lock);
725	if (vdev->ud.status == VDEV_ST_NULL ||
726	    vdev->ud.status == VDEV_ST_ERROR) {
727		dev_err(dev, "enqueue for inactive port %d\n", vdev->rhport);
728		spin_unlock(&vdev->ud.lock);
729		spin_unlock_irqrestore(&vhci->lock, flags);
730		return -ENODEV;
731	}
732	spin_unlock(&vdev->ud.lock);
733
734	ret = usb_hcd_link_urb_to_ep(hcd, urb);
735	if (ret)
736		goto no_need_unlink;
737
738	/*
739	 * The enumeration process is as follows;
740	 *
741	 *  1. Get_Descriptor request to DevAddrs(0) EndPoint(0)
742	 *     to get max packet length of default pipe
743	 *
744	 *  2. Set_Address request to DevAddr(0) EndPoint(0)
745	 *
746	 */
747	if (usb_pipedevice(urb->pipe) == 0) {
748		__u8 type = usb_pipetype(urb->pipe);
749		struct usb_ctrlrequest *ctrlreq =
750			(struct usb_ctrlrequest *) urb->setup_packet;
751
752		if (type != PIPE_CONTROL || !ctrlreq) {
753			dev_err(dev, "invalid request to devnum 0\n");
754			ret = -EINVAL;
755			goto no_need_xmit;
756		}
757
758		switch (ctrlreq->bRequest) {
759		case USB_REQ_SET_ADDRESS:
760			/* set_address may come when a device is reset */
761			dev_info(dev, "SetAddress Request (%d) to port %d\n",
762				 ctrlreq->wValue, vdev->rhport);
763
764			usb_put_dev(vdev->udev);
765			vdev->udev = usb_get_dev(urb->dev);
766
767			spin_lock(&vdev->ud.lock);
768			vdev->ud.status = VDEV_ST_USED;
769			spin_unlock(&vdev->ud.lock);
770
771			if (urb->status == -EINPROGRESS) {
772				/* This request is successfully completed. */
773				/* If not -EINPROGRESS, possibly unlinked. */
774				urb->status = 0;
775			}
776
777			goto no_need_xmit;
778
779		case USB_REQ_GET_DESCRIPTOR:
780			if (ctrlreq->wValue == cpu_to_le16(USB_DT_DEVICE << 8))
781				usbip_dbg_vhci_hc(
782					"Not yet?:Get_Descriptor to device 0 (get max pipe size)\n");
783
784			usb_put_dev(vdev->udev);
785			vdev->udev = usb_get_dev(urb->dev);
786			goto out;
787
788		default:
789			/* NOT REACHED */
790			dev_err(dev,
791				"invalid request to devnum 0 bRequest %u, wValue %u\n",
792				ctrlreq->bRequest,
793				ctrlreq->wValue);
794			ret =  -EINVAL;
795			goto no_need_xmit;
796		}
797
798	}
799
800out:
801	vhci_tx_urb(urb, vdev);
802	spin_unlock_irqrestore(&vhci->lock, flags);
803
804	return 0;
805
806no_need_xmit:
807	usb_hcd_unlink_urb_from_ep(hcd, urb);
808no_need_unlink:
809	spin_unlock_irqrestore(&vhci->lock, flags);
810	if (!ret) {
811		/* usb_hcd_giveback_urb() should be called with
812		 * irqs disabled
813		 */
814		local_irq_disable();
815		usb_hcd_giveback_urb(hcd, urb, urb->status);
816		local_irq_enable();
817	}
818	return ret;
819}
820
821/*
822 * vhci_rx gives back the urb after receiving the reply of the urb.  If an
823 * unlink pdu is sent or not, vhci_rx receives a normal return pdu and gives
824 * back its urb. For the driver unlinking the urb, the content of the urb is
825 * not important, but the calling to its completion handler is important; the
826 * completion of unlinking is notified by the completion handler.
827 *
828 *
829 * CLIENT SIDE
830 *
831 * - When vhci_hcd receives RET_SUBMIT,
832 *
833 *	- case 1a). the urb of the pdu is not unlinking.
834 *		- normal case
835 *		=> just give back the urb
836 *
837 *	- case 1b). the urb of the pdu is unlinking.
838 *		- usbip.ko will return a reply of the unlinking request.
839 *		=> give back the urb now and go to case 2b).
840 *
841 * - When vhci_hcd receives RET_UNLINK,
842 *
843 *	- case 2a). a submit request is still pending in vhci_hcd.
844 *		- urb was really pending in usbip.ko and urb_unlink_urb() was
845 *		  completed there.
846 *		=> free a pending submit request
847 *		=> notify unlink completeness by giving back the urb
848 *
849 *	- case 2b). a submit request is *not* pending in vhci_hcd.
850 *		- urb was already given back to the core driver.
851 *		=> do not give back the urb
852 *
853 *
854 * SERVER SIDE
855 *
856 * - When usbip receives CMD_UNLINK,
857 *
858 *	- case 3a). the urb of the unlink request is now in submission.
859 *		=> do usb_unlink_urb().
860 *		=> after the unlink is completed, send RET_UNLINK.
861 *
862 *	- case 3b). the urb of the unlink request is not in submission.
863 *		- may be already completed or never be received
864 *		=> send RET_UNLINK
865 *
866 */
867static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
868{
869	struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd);
870	struct vhci *vhci = vhci_hcd->vhci;
871	struct vhci_priv *priv;
872	struct vhci_device *vdev;
873	unsigned long flags;
874
875	spin_lock_irqsave(&vhci->lock, flags);
876
877	priv = urb->hcpriv;
878	if (!priv) {
879		/* URB was never linked! or will be soon given back by
880		 * vhci_rx. */
881		spin_unlock_irqrestore(&vhci->lock, flags);
882		return -EIDRM;
883	}
884
885	{
886		int ret = 0;
887
888		ret = usb_hcd_check_unlink_urb(hcd, urb, status);
889		if (ret) {
890			spin_unlock_irqrestore(&vhci->lock, flags);
891			return ret;
892		}
893	}
894
895	 /* send unlink request here? */
896	vdev = priv->vdev;
897
898	if (!vdev->ud.tcp_socket) {
899		/* tcp connection is closed */
900		spin_lock(&vdev->priv_lock);
901
902		list_del(&priv->list);
903		kfree(priv);
904		urb->hcpriv = NULL;
905
906		spin_unlock(&vdev->priv_lock);
907
908		/*
909		 * If tcp connection is alive, we have sent CMD_UNLINK.
910		 * vhci_rx will receive RET_UNLINK and give back the URB.
911		 * Otherwise, we give back it here.
912		 */
913		usb_hcd_unlink_urb_from_ep(hcd, urb);
914
915		spin_unlock_irqrestore(&vhci->lock, flags);
916		usb_hcd_giveback_urb(hcd, urb, urb->status);
917		spin_lock_irqsave(&vhci->lock, flags);
918
919	} else {
920		/* tcp connection is alive */
921		struct vhci_unlink *unlink;
922
923		spin_lock(&vdev->priv_lock);
924
925		/* setup CMD_UNLINK pdu */
926		unlink = kzalloc(sizeof(struct vhci_unlink), GFP_ATOMIC);
927		if (!unlink) {
928			spin_unlock(&vdev->priv_lock);
929			spin_unlock_irqrestore(&vhci->lock, flags);
930			usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_MALLOC);
931			return -ENOMEM;
932		}
933
934		unlink->seqnum = atomic_inc_return(&vhci_hcd->seqnum);
935		if (unlink->seqnum == 0xffff)
936			pr_info("seqnum max\n");
937
938		unlink->unlink_seqnum = priv->seqnum;
939
940		/* send cmd_unlink and try to cancel the pending URB in the
941		 * peer */
942		list_add_tail(&unlink->list, &vdev->unlink_tx);
943		wake_up(&vdev->waitq_tx);
944
945		spin_unlock(&vdev->priv_lock);
946	}
947
948	spin_unlock_irqrestore(&vhci->lock, flags);
949
950	usbip_dbg_vhci_hc("leave\n");
951	return 0;
952}
953
954static void vhci_cleanup_unlink_list(struct vhci_device *vdev,
955		struct list_head *unlink_list)
956{
957	struct vhci_hcd *vhci_hcd = vdev_to_vhci_hcd(vdev);
958	struct usb_hcd *hcd = vhci_hcd_to_hcd(vhci_hcd);
959	struct vhci *vhci = vhci_hcd->vhci;
960	struct vhci_unlink *unlink, *tmp;
961	unsigned long flags;
962
963	spin_lock_irqsave(&vhci->lock, flags);
964	spin_lock(&vdev->priv_lock);
965
966	list_for_each_entry_safe(unlink, tmp, unlink_list, list) {
967		struct urb *urb;
968
969		urb = pickup_urb_and_free_priv(vdev, unlink->unlink_seqnum);
970		if (!urb) {
971			list_del(&unlink->list);
972			kfree(unlink);
973			continue;
974		}
975
976		urb->status = -ENODEV;
977
978		usb_hcd_unlink_urb_from_ep(hcd, urb);
979
980		list_del(&unlink->list);
981
982		spin_unlock(&vdev->priv_lock);
983		spin_unlock_irqrestore(&vhci->lock, flags);
984
985		usb_hcd_giveback_urb(hcd, urb, urb->status);
986
987		spin_lock_irqsave(&vhci->lock, flags);
988		spin_lock(&vdev->priv_lock);
989
990		kfree(unlink);
991	}
992
993	spin_unlock(&vdev->priv_lock);
994	spin_unlock_irqrestore(&vhci->lock, flags);
995}
996
997static void vhci_device_unlink_cleanup(struct vhci_device *vdev)
998{
999	/* give back URB of unsent unlink request */
1000	vhci_cleanup_unlink_list(vdev, &vdev->unlink_tx);
1001
1002	/* give back URB of unanswered unlink request */
1003	vhci_cleanup_unlink_list(vdev, &vdev->unlink_rx);
1004}
1005
1006/*
1007 * The important thing is that only one context begins cleanup.
1008 * This is why error handling and cleanup become simple.
1009 * We do not want to consider race condition as possible.
1010 */
1011static void vhci_shutdown_connection(struct usbip_device *ud)
1012{
1013	struct vhci_device *vdev = container_of(ud, struct vhci_device, ud);
1014
1015	/* need this? see stub_dev.c */
1016	if (ud->tcp_socket) {
1017		pr_debug("shutdown tcp_socket %d\n", ud->sockfd);
1018		kernel_sock_shutdown(ud->tcp_socket, SHUT_RDWR);
1019	}
1020
1021	/* kill threads related to this sdev */
1022	if (vdev->ud.tcp_rx) {
1023		kthread_stop_put(vdev->ud.tcp_rx);
1024		vdev->ud.tcp_rx = NULL;
1025	}
1026	if (vdev->ud.tcp_tx) {
1027		kthread_stop_put(vdev->ud.tcp_tx);
1028		vdev->ud.tcp_tx = NULL;
1029	}
1030	pr_info("stop threads\n");
1031
1032	/* active connection is closed */
1033	if (vdev->ud.tcp_socket) {
1034		sockfd_put(vdev->ud.tcp_socket);
1035		vdev->ud.tcp_socket = NULL;
1036		vdev->ud.sockfd = -1;
1037	}
1038	pr_info("release socket\n");
1039
1040	vhci_device_unlink_cleanup(vdev);
1041
1042	/*
1043	 * rh_port_disconnect() is a trigger of ...
1044	 *   usb_disable_device():
1045	 *	disable all the endpoints for a USB device.
1046	 *   usb_disable_endpoint():
1047	 *	disable endpoints. pending urbs are unlinked(dequeued).
1048	 *
1049	 * NOTE: After calling rh_port_disconnect(), the USB device drivers of a
1050	 * detached device should release used urbs in a cleanup function (i.e.
1051	 * xxx_disconnect()). Therefore, vhci_hcd does not need to release
1052	 * pushed urbs and their private data in this function.
1053	 *
1054	 * NOTE: vhci_dequeue() must be considered carefully. When shutting down
1055	 * a connection, vhci_shutdown_connection() expects vhci_dequeue()
1056	 * gives back pushed urbs and frees their private data by request of
1057	 * the cleanup function of a USB driver. When unlinking a urb with an
1058	 * active connection, vhci_dequeue() does not give back the urb which
1059	 * is actually given back by vhci_rx after receiving its return pdu.
1060	 *
1061	 */
1062	rh_port_disconnect(vdev);
1063
1064	pr_info("disconnect device\n");
1065}
1066
1067static void vhci_device_reset(struct usbip_device *ud)
1068{
1069	struct vhci_device *vdev = container_of(ud, struct vhci_device, ud);
1070	unsigned long flags;
1071
1072	spin_lock_irqsave(&ud->lock, flags);
1073
1074	vdev->speed  = 0;
1075	vdev->devid  = 0;
1076
1077	usb_put_dev(vdev->udev);
1078	vdev->udev = NULL;
1079
1080	if (ud->tcp_socket) {
1081		sockfd_put(ud->tcp_socket);
1082		ud->tcp_socket = NULL;
1083		ud->sockfd = -1;
1084	}
1085	ud->status = VDEV_ST_NULL;
1086
1087	spin_unlock_irqrestore(&ud->lock, flags);
1088}
1089
1090static void vhci_device_unusable(struct usbip_device *ud)
1091{
1092	unsigned long flags;
1093
1094	spin_lock_irqsave(&ud->lock, flags);
1095	ud->status = VDEV_ST_ERROR;
1096	spin_unlock_irqrestore(&ud->lock, flags);
1097}
1098
1099static void vhci_device_init(struct vhci_device *vdev)
1100{
1101	memset(vdev, 0, sizeof(struct vhci_device));
1102
1103	vdev->ud.side   = USBIP_VHCI;
1104	vdev->ud.status = VDEV_ST_NULL;
1105	spin_lock_init(&vdev->ud.lock);
1106	mutex_init(&vdev->ud.sysfs_lock);
1107
1108	INIT_LIST_HEAD(&vdev->priv_rx);
1109	INIT_LIST_HEAD(&vdev->priv_tx);
1110	INIT_LIST_HEAD(&vdev->unlink_tx);
1111	INIT_LIST_HEAD(&vdev->unlink_rx);
1112	spin_lock_init(&vdev->priv_lock);
1113
1114	init_waitqueue_head(&vdev->waitq_tx);
1115
1116	vdev->ud.eh_ops.shutdown = vhci_shutdown_connection;
1117	vdev->ud.eh_ops.reset = vhci_device_reset;
1118	vdev->ud.eh_ops.unusable = vhci_device_unusable;
1119
1120	usbip_start_eh(&vdev->ud);
1121}
1122
1123static int hcd_name_to_id(const char *name)
1124{
1125	char *c;
1126	long val;
1127	int ret;
1128
1129	c = strchr(name, '.');
1130	if (c == NULL)
1131		return 0;
1132
1133	ret = kstrtol(c+1, 10, &val);
1134	if (ret < 0)
1135		return ret;
1136
1137	return val;
1138}
1139
1140static int vhci_setup(struct usb_hcd *hcd)
1141{
1142	struct vhci *vhci = *((void **)dev_get_platdata(hcd->self.controller));
1143	if (usb_hcd_is_primary_hcd(hcd)) {
1144		vhci->vhci_hcd_hs = hcd_to_vhci_hcd(hcd);
1145		vhci->vhci_hcd_hs->vhci = vhci;
1146		/*
1147		 * Mark the first roothub as being USB 2.0.
1148		 * The USB 3.0 roothub will be registered later by
1149		 * vhci_hcd_probe()
1150		 */
1151		hcd->speed = HCD_USB2;
1152		hcd->self.root_hub->speed = USB_SPEED_HIGH;
1153	} else {
1154		vhci->vhci_hcd_ss = hcd_to_vhci_hcd(hcd);
1155		vhci->vhci_hcd_ss->vhci = vhci;
1156		hcd->speed = HCD_USB3;
1157		hcd->self.root_hub->speed = USB_SPEED_SUPER;
1158	}
1159
1160	/*
1161	 * Support SG.
1162	 * sg_tablesize is an arbitrary value to alleviate memory pressure
1163	 * on the host.
1164	 */
1165	hcd->self.sg_tablesize = 32;
1166	hcd->self.no_sg_constraint = 1;
1167
1168	return 0;
1169}
1170
1171static int vhci_start(struct usb_hcd *hcd)
1172{
1173	struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd);
1174	int id, rhport;
1175	int err;
1176
1177	usbip_dbg_vhci_hc("enter vhci_start\n");
1178
1179	if (usb_hcd_is_primary_hcd(hcd))
1180		spin_lock_init(&vhci_hcd->vhci->lock);
1181
1182	/* initialize private data of usb_hcd */
1183
1184	for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) {
1185		struct vhci_device *vdev = &vhci_hcd->vdev[rhport];
1186
1187		vhci_device_init(vdev);
1188		vdev->rhport = rhport;
1189	}
1190
1191	atomic_set(&vhci_hcd->seqnum, 0);
1192
1193	hcd->power_budget = 0; /* no limit */
1194	hcd->uses_new_polling = 1;
1195
1196#ifdef CONFIG_USB_OTG
1197	hcd->self.otg_port = 1;
1198#endif
1199
1200	id = hcd_name_to_id(hcd_name(hcd));
1201	if (id < 0) {
1202		pr_err("invalid vhci name %s\n", hcd_name(hcd));
1203		return -EINVAL;
1204	}
1205
1206	/* vhci_hcd is now ready to be controlled through sysfs */
1207	if (id == 0 && usb_hcd_is_primary_hcd(hcd)) {
1208		err = vhci_init_attr_group();
1209		if (err) {
1210			dev_err(hcd_dev(hcd), "init attr group failed, err = %d\n", err);
1211			return err;
1212		}
1213		err = sysfs_create_group(&hcd_dev(hcd)->kobj, &vhci_attr_group);
1214		if (err) {
1215			dev_err(hcd_dev(hcd), "create sysfs files failed, err = %d\n", err);
1216			vhci_finish_attr_group();
1217			return err;
1218		}
1219		pr_info("created sysfs %s\n", hcd_name(hcd));
1220	}
1221
1222	return 0;
1223}
1224
1225static void vhci_stop(struct usb_hcd *hcd)
1226{
1227	struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd);
1228	int id, rhport;
1229
1230	usbip_dbg_vhci_hc("stop VHCI controller\n");
1231
1232	/* 1. remove the userland interface of vhci_hcd */
1233	id = hcd_name_to_id(hcd_name(hcd));
1234	if (id == 0 && usb_hcd_is_primary_hcd(hcd)) {
1235		sysfs_remove_group(&hcd_dev(hcd)->kobj, &vhci_attr_group);
1236		vhci_finish_attr_group();
1237	}
1238
1239	/* 2. shutdown all the ports of vhci_hcd */
1240	for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) {
1241		struct vhci_device *vdev = &vhci_hcd->vdev[rhport];
1242
1243		usbip_event_add(&vdev->ud, VDEV_EVENT_REMOVED);
1244		usbip_stop_eh(&vdev->ud);
1245	}
1246}
1247
1248static int vhci_get_frame_number(struct usb_hcd *hcd)
1249{
1250	dev_err_ratelimited(&hcd->self.root_hub->dev, "Not yet implemented\n");
1251	return 0;
1252}
1253
1254#ifdef CONFIG_PM
1255
1256/* FIXME: suspend/resume */
1257static int vhci_bus_suspend(struct usb_hcd *hcd)
1258{
1259	struct vhci *vhci = *((void **)dev_get_platdata(hcd->self.controller));
1260	unsigned long flags;
1261
1262	dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__);
1263
1264	spin_lock_irqsave(&vhci->lock, flags);
1265	hcd->state = HC_STATE_SUSPENDED;
1266	spin_unlock_irqrestore(&vhci->lock, flags);
1267
1268	return 0;
1269}
1270
1271static int vhci_bus_resume(struct usb_hcd *hcd)
1272{
1273	struct vhci *vhci = *((void **)dev_get_platdata(hcd->self.controller));
1274	int rc = 0;
1275	unsigned long flags;
1276
1277	dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__);
1278
1279	spin_lock_irqsave(&vhci->lock, flags);
1280	if (!HCD_HW_ACCESSIBLE(hcd))
1281		rc = -ESHUTDOWN;
1282	else
1283		hcd->state = HC_STATE_RUNNING;
1284	spin_unlock_irqrestore(&vhci->lock, flags);
1285
1286	return rc;
1287}
1288
1289#else
1290
1291#define vhci_bus_suspend      NULL
1292#define vhci_bus_resume       NULL
1293#endif
1294
1295/* Change a group of bulk endpoints to support multiple stream IDs */
1296static int vhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,
1297	struct usb_host_endpoint **eps, unsigned int num_eps,
1298	unsigned int num_streams, gfp_t mem_flags)
1299{
1300	dev_dbg(&hcd->self.root_hub->dev, "vhci_alloc_streams not implemented\n");
1301	return 0;
1302}
1303
1304/* Reverts a group of bulk endpoints back to not using stream IDs. */
1305static int vhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev,
1306	struct usb_host_endpoint **eps, unsigned int num_eps,
1307	gfp_t mem_flags)
1308{
1309	dev_dbg(&hcd->self.root_hub->dev, "vhci_free_streams not implemented\n");
1310	return 0;
1311}
1312
1313static const struct hc_driver vhci_hc_driver = {
1314	.description	= driver_name,
1315	.product_desc	= driver_desc,
1316	.hcd_priv_size	= sizeof(struct vhci_hcd),
1317
1318	.flags		= HCD_USB3 | HCD_SHARED,
1319
1320	.reset		= vhci_setup,
1321	.start		= vhci_start,
1322	.stop		= vhci_stop,
1323
1324	.urb_enqueue	= vhci_urb_enqueue,
1325	.urb_dequeue	= vhci_urb_dequeue,
1326
1327	.get_frame_number = vhci_get_frame_number,
1328
1329	.hub_status_data = vhci_hub_status,
1330	.hub_control    = vhci_hub_control,
1331	.bus_suspend	= vhci_bus_suspend,
1332	.bus_resume	= vhci_bus_resume,
1333
1334	.alloc_streams	= vhci_alloc_streams,
1335	.free_streams	= vhci_free_streams,
1336};
1337
1338static int vhci_hcd_probe(struct platform_device *pdev)
1339{
1340	struct vhci             *vhci = *((void **)dev_get_platdata(&pdev->dev));
1341	struct usb_hcd		*hcd_hs;
1342	struct usb_hcd		*hcd_ss;
1343	int			ret;
1344
1345	usbip_dbg_vhci_hc("name %s id %d\n", pdev->name, pdev->id);
1346
1347	/*
1348	 * Allocate and initialize hcd.
1349	 * Our private data is also allocated automatically.
1350	 */
1351	hcd_hs = usb_create_hcd(&vhci_hc_driver, &pdev->dev, dev_name(&pdev->dev));
1352	if (!hcd_hs) {
1353		pr_err("create primary hcd failed\n");
1354		return -ENOMEM;
1355	}
1356	hcd_hs->has_tt = 1;
1357
1358	/*
1359	 * Finish generic HCD structure initialization and register.
1360	 * Call the driver's reset() and start() routines.
1361	 */
1362	ret = usb_add_hcd(hcd_hs, 0, 0);
1363	if (ret != 0) {
1364		pr_err("usb_add_hcd hs failed %d\n", ret);
1365		goto put_usb2_hcd;
1366	}
1367
1368	hcd_ss = usb_create_shared_hcd(&vhci_hc_driver, &pdev->dev,
1369				       dev_name(&pdev->dev), hcd_hs);
1370	if (!hcd_ss) {
1371		ret = -ENOMEM;
1372		pr_err("create shared hcd failed\n");
1373		goto remove_usb2_hcd;
1374	}
1375
1376	ret = usb_add_hcd(hcd_ss, 0, 0);
1377	if (ret) {
1378		pr_err("usb_add_hcd ss failed %d\n", ret);
1379		goto put_usb3_hcd;
1380	}
1381
1382	usbip_dbg_vhci_hc("bye\n");
1383	return 0;
1384
1385put_usb3_hcd:
1386	usb_put_hcd(hcd_ss);
1387remove_usb2_hcd:
1388	usb_remove_hcd(hcd_hs);
1389put_usb2_hcd:
1390	usb_put_hcd(hcd_hs);
1391	vhci->vhci_hcd_hs = NULL;
1392	vhci->vhci_hcd_ss = NULL;
1393	return ret;
1394}
1395
1396static void vhci_hcd_remove(struct platform_device *pdev)
1397{
1398	struct vhci *vhci = *((void **)dev_get_platdata(&pdev->dev));
1399
1400	/*
1401	 * Disconnects the root hub,
1402	 * then reverses the effects of usb_add_hcd(),
1403	 * invoking the HCD's stop() methods.
1404	 */
1405	usb_remove_hcd(vhci_hcd_to_hcd(vhci->vhci_hcd_ss));
1406	usb_put_hcd(vhci_hcd_to_hcd(vhci->vhci_hcd_ss));
1407
1408	usb_remove_hcd(vhci_hcd_to_hcd(vhci->vhci_hcd_hs));
1409	usb_put_hcd(vhci_hcd_to_hcd(vhci->vhci_hcd_hs));
1410
1411	vhci->vhci_hcd_hs = NULL;
1412	vhci->vhci_hcd_ss = NULL;
1413}
1414
1415#ifdef CONFIG_PM
1416
1417/* what should happen for USB/IP under suspend/resume? */
1418static int vhci_hcd_suspend(struct platform_device *pdev, pm_message_t state)
1419{
1420	struct usb_hcd *hcd;
1421	struct vhci *vhci;
1422	int rhport;
1423	int connected = 0;
1424	int ret = 0;
1425	unsigned long flags;
1426
1427	dev_dbg(&pdev->dev, "%s\n", __func__);
1428
1429	hcd = platform_get_drvdata(pdev);
1430	if (!hcd)
1431		return 0;
1432
1433	vhci = *((void **)dev_get_platdata(hcd->self.controller));
1434
1435	spin_lock_irqsave(&vhci->lock, flags);
1436
1437	for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) {
1438		if (vhci->vhci_hcd_hs->port_status[rhport] &
1439		    USB_PORT_STAT_CONNECTION)
1440			connected += 1;
1441
1442		if (vhci->vhci_hcd_ss->port_status[rhport] &
1443		    USB_PORT_STAT_CONNECTION)
1444			connected += 1;
1445	}
1446
1447	spin_unlock_irqrestore(&vhci->lock, flags);
1448
1449	if (connected > 0) {
1450		dev_info(&pdev->dev,
1451			 "We have %d active connection%s. Do not suspend.\n",
1452			 connected, (connected == 1 ? "" : "s"));
1453		ret =  -EBUSY;
1454	} else {
1455		dev_info(&pdev->dev, "suspend vhci_hcd");
1456		clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
1457	}
1458
1459	return ret;
1460}
1461
1462static int vhci_hcd_resume(struct platform_device *pdev)
1463{
1464	struct usb_hcd *hcd;
1465
1466	dev_dbg(&pdev->dev, "%s\n", __func__);
1467
1468	hcd = platform_get_drvdata(pdev);
1469	if (!hcd)
1470		return 0;
1471	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
1472	usb_hcd_poll_rh_status(hcd);
1473
1474	return 0;
1475}
1476
1477#else
1478
1479#define vhci_hcd_suspend	NULL
1480#define vhci_hcd_resume		NULL
1481
1482#endif
1483
1484static struct platform_driver vhci_driver = {
1485	.probe	= vhci_hcd_probe,
1486	.remove_new = vhci_hcd_remove,
1487	.suspend = vhci_hcd_suspend,
1488	.resume	= vhci_hcd_resume,
1489	.driver	= {
1490		.name = driver_name,
1491	},
1492};
1493
1494static void del_platform_devices(void)
1495{
1496	struct platform_device *pdev;
1497	int i;
1498
1499	for (i = 0; i < vhci_num_controllers; i++) {
1500		pdev = vhcis[i].pdev;
1501		if (pdev != NULL)
1502			platform_device_unregister(pdev);
1503		vhcis[i].pdev = NULL;
1504	}
1505	sysfs_remove_link(&platform_bus.kobj, driver_name);
1506}
1507
1508static int __init vhci_hcd_init(void)
1509{
1510	int i, ret;
1511
1512	if (usb_disabled())
1513		return -ENODEV;
1514
1515	if (vhci_num_controllers < 1)
1516		vhci_num_controllers = 1;
1517
1518	vhcis = kcalloc(vhci_num_controllers, sizeof(struct vhci), GFP_KERNEL);
1519	if (vhcis == NULL)
1520		return -ENOMEM;
1521
1522	for (i = 0; i < vhci_num_controllers; i++) {
1523		vhcis[i].pdev = platform_device_alloc(driver_name, i);
1524		if (!vhcis[i].pdev) {
1525			i--;
1526			while (i >= 0)
1527				platform_device_put(vhcis[i--].pdev);
1528			ret = -ENOMEM;
1529			goto err_device_alloc;
1530		}
1531	}
1532	for (i = 0; i < vhci_num_controllers; i++) {
1533		void *vhci = &vhcis[i];
1534		ret = platform_device_add_data(vhcis[i].pdev, &vhci, sizeof(void *));
1535		if (ret)
1536			goto err_driver_register;
1537	}
1538
1539	ret = platform_driver_register(&vhci_driver);
1540	if (ret)
1541		goto err_driver_register;
1542
1543	for (i = 0; i < vhci_num_controllers; i++) {
1544		ret = platform_device_add(vhcis[i].pdev);
1545		if (ret < 0) {
1546			i--;
1547			while (i >= 0)
1548				platform_device_del(vhcis[i--].pdev);
1549			goto err_add_hcd;
1550		}
1551	}
1552
1553	return ret;
1554
1555err_add_hcd:
1556	platform_driver_unregister(&vhci_driver);
1557err_driver_register:
1558	for (i = 0; i < vhci_num_controllers; i++)
1559		platform_device_put(vhcis[i].pdev);
1560err_device_alloc:
1561	kfree(vhcis);
1562	return ret;
1563}
1564
1565static void __exit vhci_hcd_exit(void)
1566{
1567	del_platform_devices();
1568	platform_driver_unregister(&vhci_driver);
1569	kfree(vhcis);
1570}
1571
1572module_init(vhci_hcd_init);
1573module_exit(vhci_hcd_exit);
1574
1575MODULE_AUTHOR(DRIVER_AUTHOR);
1576MODULE_DESCRIPTION(DRIVER_DESC);
1577MODULE_LICENSE("GPL");
1578