1/* SPDX-License-Identifier: GPL-2.0 */
2/*
3 * Copyright (c) 2015 MediaTek Inc.
4 * Author:
5 *  Zhigang.Wei <zhigang.wei@mediatek.com>
6 *  Chunfeng.Yun <chunfeng.yun@mediatek.com>
7 */
8
9#ifndef _XHCI_MTK_H_
10#define _XHCI_MTK_H_
11
12#include <linux/clk.h>
13#include <linux/hashtable.h>
14#include <linux/regulator/consumer.h>
15
16#include "xhci.h"
17
18#define BULK_CLKS_NUM	6
19#define BULK_VREGS_NUM	2
20
21/* support at most 64 ep, use 32 size hash table */
22#define SCH_EP_HASH_BITS	5
23
24/**
25 * To simplify scheduler algorithm, set a upper limit for ESIT,
26 * if a synchromous ep's ESIT is larger than @XHCI_MTK_MAX_ESIT,
27 * round down to the limit value, that means allocating more
28 * bandwidth to it.
29 */
30#define XHCI_MTK_MAX_ESIT	(1 << 6)
31#define XHCI_MTK_BW_INDEX(x)	((x) & (XHCI_MTK_MAX_ESIT - 1))
32
33/**
34 * @fs_bus_bw: array to keep track of bandwidth already used for FS
35 * @ep_list: Endpoints using this TT
36 */
37struct mu3h_sch_tt {
38	u32 fs_bus_bw[XHCI_MTK_MAX_ESIT];
39	struct list_head ep_list;
40};
41
42/**
43 * struct mu3h_sch_bw_info: schedule information for bandwidth domain
44 *
45 * @bus_bw: array to keep track of bandwidth already used at each uframes
46 *
47 * treat a HS root port as a bandwidth domain, but treat a SS root port as
48 * two bandwidth domains, one for IN eps and another for OUT eps.
49 */
50struct mu3h_sch_bw_info {
51	u32 bus_bw[XHCI_MTK_MAX_ESIT];
52};
53
54/**
55 * struct mu3h_sch_ep_info: schedule information for endpoint
56 *
57 * @esit: unit is 125us, equal to 2 << Interval field in ep-context
58 * @num_esit: number of @esit in a period
59 * @num_budget_microframes: number of continuous uframes
60 *		(@repeat==1) scheduled within the interval
61 * @bw_cost_per_microframe: bandwidth cost per microframe
62 * @hentry: hash table entry
63 * @endpoint: linked into bandwidth domain which it belongs to
64 * @tt_endpoint: linked into mu3h_sch_tt's list which it belongs to
65 * @bw_info: bandwidth domain which this endpoint belongs
66 * @sch_tt: mu3h_sch_tt linked into
67 * @ep_type: endpoint type
68 * @maxpkt: max packet size of endpoint
69 * @ep: address of usb_host_endpoint struct
70 * @allocated: the bandwidth is aready allocated from bus_bw
71 * @offset: which uframe of the interval that transfer should be
72 *		scheduled first time within the interval
73 * @repeat: the time gap between two uframes that transfers are
74 *		scheduled within a interval. in the simple algorithm, only
75 *		assign 0 or 1 to it; 0 means using only one uframe in a
76 *		interval, and 1 means using @num_budget_microframes
77 *		continuous uframes
78 * @pkts: number of packets to be transferred in the scheduled uframes
79 * @cs_count: number of CS that host will trigger
80 * @burst_mode: burst mode for scheduling. 0: normal burst mode,
81 *		distribute the bMaxBurst+1 packets for a single burst
82 *		according to @pkts and @repeat, repeate the burst multiple
83 *		times; 1: distribute the (bMaxBurst+1)*(Mult+1) packets
84 *		according to @pkts and @repeat. normal mode is used by
85 *		default
86 */
87struct mu3h_sch_ep_info {
88	u32 esit;
89	u32 num_esit;
90	u32 num_budget_microframes;
91	u32 bw_cost_per_microframe;
92	struct list_head endpoint;
93	struct hlist_node hentry;
94	struct list_head tt_endpoint;
95	struct mu3h_sch_bw_info *bw_info;
96	struct mu3h_sch_tt *sch_tt;
97	u32 ep_type;
98	u32 maxpkt;
99	struct usb_host_endpoint *ep;
100	enum usb_device_speed speed;
101	bool allocated;
102	/*
103	 * mtk xHCI scheduling information put into reserved DWs
104	 * in ep context
105	 */
106	u32 offset;
107	u32 repeat;
108	u32 pkts;
109	u32 cs_count;
110	u32 burst_mode;
111};
112
113#define MU3C_U3_PORT_MAX 4
114#define MU3C_U2_PORT_MAX 5
115
116/**
117 * struct mu3c_ippc_regs: MTK ssusb ip port control registers
118 * @ip_pw_ctr0~3: ip power and clock control registers
119 * @ip_pw_sts1~2: ip power and clock status registers
120 * @ip_xhci_cap: ip xHCI capability register
121 * @u3_ctrl_p[x]: ip usb3 port x control register, only low 4bytes are used
122 * @u2_ctrl_p[x]: ip usb2 port x control register, only low 4bytes are used
123 * @u2_phy_pll: usb2 phy pll control register
124 */
125struct mu3c_ippc_regs {
126	__le32 ip_pw_ctr0;
127	__le32 ip_pw_ctr1;
128	__le32 ip_pw_ctr2;
129	__le32 ip_pw_ctr3;
130	__le32 ip_pw_sts1;
131	__le32 ip_pw_sts2;
132	__le32 reserved0[3];
133	__le32 ip_xhci_cap;
134	__le32 reserved1[2];
135	__le64 u3_ctrl_p[MU3C_U3_PORT_MAX];
136	__le64 u2_ctrl_p[MU3C_U2_PORT_MAX];
137	__le32 reserved2;
138	__le32 u2_phy_pll;
139	__le32 reserved3[33]; /* 0x80 ~ 0xff */
140};
141
142struct xhci_hcd_mtk {
143	struct device *dev;
144	struct usb_hcd *hcd;
145	struct mu3h_sch_bw_info *sch_array;
146	struct list_head bw_ep_chk_list;
147	DECLARE_HASHTABLE(sch_ep_hash, SCH_EP_HASH_BITS);
148	struct mu3c_ippc_regs __iomem *ippc_regs;
149	int num_u2_ports;
150	int num_u3_ports;
151	int u2p_dis_msk;
152	int u3p_dis_msk;
153	struct clk_bulk_data clks[BULK_CLKS_NUM];
154	struct regulator_bulk_data supplies[BULK_VREGS_NUM];
155	unsigned int has_ippc:1;
156	unsigned int lpm_support:1;
157	unsigned int u2_lpm_disable:1;
158	/* usb remote wakeup */
159	unsigned int uwk_en:1;
160	struct regmap *uwk;
161	u32 uwk_reg_base;
162	u32 uwk_vers;
163	/* quirk */
164	u32 rxfifo_depth;
165};
166
167static inline struct xhci_hcd_mtk *hcd_to_mtk(struct usb_hcd *hcd)
168{
169	return dev_get_drvdata(hcd->self.controller);
170}
171
172int xhci_mtk_sch_init(struct xhci_hcd_mtk *mtk);
173void xhci_mtk_sch_exit(struct xhci_hcd_mtk *mtk);
174int xhci_mtk_add_ep(struct usb_hcd *hcd, struct usb_device *udev,
175		    struct usb_host_endpoint *ep);
176int xhci_mtk_drop_ep(struct usb_hcd *hcd, struct usb_device *udev,
177		     struct usb_host_endpoint *ep);
178int xhci_mtk_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
179void xhci_mtk_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
180
181#endif		/* _XHCI_MTK_H_ */
182