1/* SPDX-License-Identifier: GPL-2.0 */
2/*
3 * USBHS-DEV device controller driver header file
4 *
5 * Copyright (C) 2023 Cadence.
6 *
7 * Author: Pawel Laszczak <pawell@cadence.com>
8 */
9
10#ifndef __LINUX_CDNS2_GADGET
11#define __LINUX_CDNS2_GADGET
12
13#include <linux/usb/gadget.h>
14#include <linux/dma-direction.h>
15
16/*
17 * USBHS register interface.
18 * This corresponds to the USBHS Device Controller Interface.
19 */
20
21/**
22 * struct cdns2_ep0_regs - endpoint 0 related registers.
23 * @rxbc: receive (OUT) 0 endpoint byte count register.
24 * @txbc: transmit (IN) 0 endpoint byte count register.
25 * @cs: 0 endpoint control and status register.
26 * @reserved1: reserved.
27 * @fifo: 0 endpoint fifo register.
28 * @reserved2: reserved.
29 * @setupdat: SETUP data register.
30 * @reserved4: reserved.
31 * @maxpack: 0 endpoint max packet size.
32 */
33struct cdns2_ep0_regs {
34	__u8 rxbc;
35	__u8 txbc;
36	__u8 cs;
37	__u8 reserved1[4];
38	__u8 fifo;
39	__le32 reserved2[94];
40	__u8 setupdat[8];
41	__u8 reserved4[88];
42	__u8 maxpack;
43} __packed __aligned(4);
44
45/* EP0CS - bitmasks. */
46/* Endpoint 0 stall bit for status stage. */
47#define EP0CS_STALL	BIT(0)
48/* HSNAK bit. */
49#define EP0CS_HSNAK	BIT(1)
50/* IN 0 endpoint busy bit. */
51#define EP0CS_TXBSY_MSK	BIT(2)
52/* OUT 0 endpoint busy bit. */
53#define EP0CS_RXBSY_MSK	BIT(3)
54/* Send STALL in the data stage phase. */
55#define EP0CS_DSTALL	BIT(4)
56/* SETUP buffer content was changed. */
57#define EP0CS_CHGSET	BIT(7)
58
59/* EP0FIFO - bitmasks. */
60/* Direction. */
61#define EP0_FIFO_IO_TX	BIT(4)
62/* FIFO auto bit. */
63#define EP0_FIFO_AUTO	BIT(5)
64/* FIFO commit bit. */
65#define EP0_FIFO_COMMIT	BIT(6)
66/* FIFO access bit. */
67#define EP0_FIFO_ACCES	BIT(7)
68
69/**
70 * struct cdns2_epx_base - base endpoint registers.
71 * @rxbc: OUT endpoint byte count register.
72 * @rxcon: OUT endpoint control register.
73 * @rxcs: OUT endpoint control and status register.
74 * @txbc: IN endpoint byte count register.
75 * @txcon: IN endpoint control register.
76 * @txcs: IN endpoint control and status register.
77 */
78struct cdns2_epx_base {
79	__le16 rxbc;
80	__u8 rxcon;
81	__u8 rxcs;
82	__le16 txbc;
83	__u8 txcon;
84	__u8 txcs;
85} __packed __aligned(4);
86
87/* rxcon/txcon - endpoint control register bitmasks. */
88/* Endpoint buffering: 0 - single buffering ... 3 - quad buffering. */
89#define EPX_CON_BUF		GENMASK(1, 0)
90/* Endpoint type. */
91#define EPX_CON_TYPE		GENMASK(3, 2)
92/* Endpoint type: isochronous. */
93#define EPX_CON_TYPE_ISOC	0x4
94/* Endpoint type: bulk. */
95#define EPX_CON_TYPE_BULK	0x8
96/* Endpoint type: interrupt. */
97#define EPX_CON_TYPE_INT	0xC
98/* Number of packets per microframe. */
99#define EPX_CON_ISOD		GENMASK(5, 4)
100#define EPX_CON_ISOD_SHIFT	0x4
101/* Endpoint stall bit. */
102#define EPX_CON_STALL		BIT(6)
103/* Endpoint enable bit.*/
104#define EPX_CON_VAL		BIT(7)
105
106/* rxcs/txcs - endpoint control and status bitmasks. */
107/* Data sequence error for the ISO endpoint. */
108#define EPX_CS_ERR(p)		((p) & BIT(0))
109
110/**
111 * struct cdns2_epx_regs - endpoint 1..15 related registers.
112 * @reserved: reserved.
113 * @ep: none control endpoints array.
114 * @reserved2: reserved.
115 * @endprst: endpoint reset register.
116 * @reserved3: reserved.
117 * @isoautoarm: ISO auto-arm register.
118 * @reserved4: reserved.
119 * @isodctrl: ISO control register.
120 * @reserved5: reserved.
121 * @isoautodump: ISO auto dump enable register.
122 * @reserved6: reserved.
123 * @rxmaxpack: receive (OUT) Max packet size register.
124 * @reserved7: reserved.
125 * @rxstaddr: receive (OUT) start address endpoint buffer register.
126 * @reserved8: reserved.
127 * @txstaddr: transmit (IN) start address endpoint buffer register.
128 * @reserved9: reserved.
129 * @txmaxpack: transmit (IN) Max packet size register.
130 */
131struct cdns2_epx_regs {
132	__le32 reserved[2];
133	struct cdns2_epx_base ep[15];
134	__u8 reserved2[290];
135	__u8 endprst;
136	__u8 reserved3[41];
137	__le16 isoautoarm;
138	__u8 reserved4[10];
139	__le16 isodctrl;
140	__le16 reserved5;
141	__le16 isoautodump;
142	__le32 reserved6;
143	__le16 rxmaxpack[15];
144	__le32 reserved7[65];
145	__le32 rxstaddr[15];
146	__u8 reserved8[4];
147	__le32 txstaddr[15];
148	__u8 reserved9[98];
149	__le16 txmaxpack[15];
150} __packed __aligned(4);
151
152/* ENDPRST - bitmasks. */
153/* Endpoint number. */
154#define ENDPRST_EP	GENMASK(3, 0)
155/* IN direction bit. */
156#define ENDPRST_IO_TX	BIT(4)
157/* Toggle reset bit. */
158#define ENDPRST_TOGRST	BIT(5)
159/* FIFO reset bit. */
160#define ENDPRST_FIFORST	BIT(6)
161/* Toggle status and reset bit. */
162#define ENDPRST_TOGSETQ	BIT(7)
163
164/**
165 * struct cdns2_interrupt_regs - USB interrupt related registers.
166 * @reserved: reserved.
167 * @usbirq: USB interrupt request register.
168 * @extirq: external interrupt request register.
169 * @rxpngirq: external interrupt request register.
170 * @reserved1: reserved.
171 * @usbien: USB interrupt enable register.
172 * @extien: external interrupt enable register.
173 * @reserved2: reserved.
174 * @usbivect: USB interrupt vector register.
175 */
176struct cdns2_interrupt_regs {
177	__u8 reserved[396];
178	__u8 usbirq;
179	__u8 extirq;
180	__le16 rxpngirq;
181	__le16 reserved1[4];
182	__u8 usbien;
183	__u8 extien;
184	__le16 reserved2[3];
185	__u8 usbivect;
186} __packed __aligned(4);
187
188/* EXTIRQ and EXTIEN - bitmasks. */
189/* VBUS fault fall interrupt. */
190#define EXTIRQ_VBUSFAULT_FALL BIT(0)
191/* VBUS fault fall interrupt. */
192#define EXTIRQ_VBUSFAULT_RISE BIT(1)
193/* Wake up interrupt bit. */
194#define EXTIRQ_WAKEUP	BIT(7)
195
196/* USBIEN and USBIRQ - bitmasks. */
197/* SETUP data valid interrupt bit.*/
198#define USBIRQ_SUDAV	BIT(0)
199/* Start-of-frame interrupt bit. */
200#define USBIRQ_SOF	BIT(1)
201/* SETUP token interrupt bit. */
202#define USBIRQ_SUTOK	BIT(2)
203/* USB suspend interrupt bit. */
204#define USBIRQ_SUSPEND	BIT(3)
205/* USB reset interrupt bit. */
206#define USBIRQ_URESET	BIT(4)
207/* USB high-speed mode interrupt bit. */
208#define USBIRQ_HSPEED	BIT(5)
209/* Link Power Management interrupt bit. */
210#define USBIRQ_LPM	BIT(7)
211
212#define USB_IEN_INIT (USBIRQ_SUDAV | USBIRQ_SUSPEND | USBIRQ_URESET \
213		      | USBIRQ_HSPEED | USBIRQ_LPM)
214/**
215 * struct cdns2_usb_regs - USB controller registers.
216 * @reserved: reserved.
217 * @lpmctrl: LPM control register.
218 * @lpmclock: LPM clock register.
219 * @reserved2: reserved.
220 * @endprst: endpoint reset register.
221 * @usbcs: USB control and status register.
222 * @frmnr: USB frame counter register.
223 * @fnaddr: function Address register.
224 * @clkgate: clock gate register.
225 * @fifoctrl: FIFO control register.
226 * @speedctrl: speed Control register.
227 * @sleep_clkgate: sleep Clock Gate register.
228 * @reserved3: reserved.
229 * @cpuctrl: microprocessor control register.
230 */
231struct cdns2_usb_regs {
232	__u8 reserved[4];
233	__u16 lpmctrl;
234	__u8 lpmclock;
235	__u8 reserved2[411];
236	__u8 endprst;
237	__u8 usbcs;
238	__le16 frmnr;
239	__u8 fnaddr;
240	__u8 clkgate;
241	__u8 fifoctrl;
242	__u8 speedctrl;
243	__u8 sleep_clkgate;
244	__u8 reserved3[533];
245	__u8 cpuctrl;
246} __packed __aligned(4);
247
248/* LPMCTRL - bitmasks. */
249/* BESL (Best Effort Service Latency). */
250#define LPMCTRLLL_HIRD		GENMASK(7, 4)
251/* Last received Remote Wakeup field from LPM Extended Token packet. */
252#define LPMCTRLLH_BREMOTEWAKEUP	BIT(8)
253/* Reflects value of the lpmnyet bit located in the usbcs[1] register. */
254#define LPMCTRLLH_LPMNYET	BIT(16)
255
256/* LPMCLOCK - bitmasks. */
257/*
258 * If bit is 1 the controller automatically turns off clock
259 * (utmisleepm goes to low), else the microprocessor should use
260 * sleep clock gate register to turn off clock.
261 */
262#define LPMCLOCK_SLEEP_ENTRY	BIT(7)
263
264/* USBCS - bitmasks. */
265/* Send NYET handshake for the LPM transaction. */
266#define USBCS_LPMNYET		BIT(2)
267/* Remote wake-up bit. */
268#define USBCS_SIGRSUME		BIT(5)
269/* Software disconnect bit. */
270#define USBCS_DISCON		BIT(6)
271/* Indicates that a wakeup pin resumed the controller. */
272#define USBCS_WAKESRC		BIT(7)
273
274/* FIFOCTRL - bitmasks. */
275/* Endpoint number. */
276#define FIFOCTRL_EP		GENMASK(3, 0)
277/* Direction bit. */
278#define FIFOCTRL_IO_TX		BIT(4)
279/* FIFO auto bit. */
280#define FIFOCTRL_FIFOAUTO	BIT(5)
281/* FIFO commit bit. */
282#define FIFOCTRL_FIFOCMIT	BIT(6)
283/* FIFO access bit. */
284#define FIFOCTRL_FIFOACC	BIT(7)
285
286/* SPEEDCTRL - bitmasks. */
287/* Device works in Full Speed. */
288#define SPEEDCTRL_FS		BIT(1)
289/* Device works in High Speed. */
290#define SPEEDCTRL_HS		BIT(2)
291/* Force FS mode. */
292#define SPEEDCTRL_HSDISABLE	BIT(7)
293
294/* CPUCTRL- bitmasks. */
295/* Controller reset bit. */
296#define CPUCTRL_SW_RST		BIT(1)
297
298/**
299 * struct cdns2_adma_regs - ADMA controller registers.
300 * @conf: DMA global configuration register.
301 * @sts: DMA global Status register.
302 * @reserved1: reserved.
303 * @ep_sel: DMA endpoint select register.
304 * @ep_traddr: DMA endpoint transfer ring address register.
305 * @ep_cfg: DMA endpoint configuration register.
306 * @ep_cmd: DMA endpoint command register.
307 * @ep_sts: DMA endpoint status register.
308 * @reserved2: reserved.
309 * @ep_sts_en: DMA endpoint status enable register.
310 * @drbl: DMA doorbell register.
311 * @ep_ien: DMA endpoint interrupt enable register.
312 * @ep_ists: DMA endpoint interrupt status register.
313 * @axim_ctrl: AXI Master Control register.
314 * @axim_id: AXI Master ID register.
315 * @reserved3: reserved.
316 * @axim_cap: AXI Master Wrapper Extended Capability.
317 * @reserved4: reserved.
318 * @axim_ctrl0: AXI Master Wrapper Extended Capability Control Register 0.
319 * @axim_ctrl1: AXI Master Wrapper Extended Capability Control Register 1.
320 */
321struct cdns2_adma_regs {
322	__le32 conf;
323	__le32 sts;
324	__le32 reserved1[5];
325	__le32 ep_sel;
326	__le32 ep_traddr;
327	__le32 ep_cfg;
328	__le32 ep_cmd;
329	__le32 ep_sts;
330	__le32 reserved2;
331	__le32 ep_sts_en;
332	__le32 drbl;
333	__le32 ep_ien;
334	__le32 ep_ists;
335	__le32 axim_ctrl;
336	__le32 axim_id;
337	__le32 reserved3;
338	__le32 axim_cap;
339	__le32 reserved4;
340	__le32 axim_ctrl0;
341	__le32 axim_ctrl1;
342};
343
344#define CDNS2_ADMA_REGS_OFFSET	0x400
345
346/* DMA_CONF - bitmasks. */
347/* Reset USB device configuration. */
348#define DMA_CONF_CFGRST		BIT(0)
349/* Singular DMA transfer mode.*/
350#define DMA_CONF_DSING		BIT(8)
351/* Multiple DMA transfers mode.*/
352#define DMA_CONF_DMULT		BIT(9)
353
354/* DMA_EP_CFG - bitmasks. */
355/* Endpoint enable. */
356#define DMA_EP_CFG_ENABLE	BIT(0)
357
358/* DMA_EP_CMD - bitmasks. */
359/* Endpoint reset. */
360#define DMA_EP_CMD_EPRST	BIT(0)
361/* Transfer descriptor ready. */
362#define DMA_EP_CMD_DRDY		BIT(6)
363/* Data flush. */
364#define DMA_EP_CMD_DFLUSH	BIT(7)
365
366/* DMA_EP_STS - bitmasks. */
367/* Interrupt On Complete. */
368#define DMA_EP_STS_IOC		BIT(2)
369/* Interrupt on Short Packet. */
370#define DMA_EP_STS_ISP		BIT(3)
371/* Transfer descriptor missing. */
372#define DMA_EP_STS_DESCMIS	BIT(4)
373/* TRB error. */
374#define DMA_EP_STS_TRBERR	BIT(7)
375/* DMA busy bit. */
376#define DMA_EP_STS_DBUSY	BIT(9)
377/* Current Cycle Status. */
378#define DMA_EP_STS_CCS(p)	((p) & BIT(11))
379/* OUT size mismatch. */
380#define DMA_EP_STS_OUTSMM	BIT(14)
381/* ISO transmission error. */
382#define DMA_EP_STS_ISOERR	BIT(15)
383
384/* DMA_EP_STS_EN - bitmasks. */
385/* OUT transfer missing descriptor enable. */
386#define DMA_EP_STS_EN_DESCMISEN	BIT(4)
387/* TRB enable. */
388#define DMA_EP_STS_EN_TRBERREN	BIT(7)
389/* OUT size mismatch enable. */
390#define DMA_EP_STS_EN_OUTSMMEN	BIT(14)
391/* ISO transmission error enable. */
392#define DMA_EP_STS_EN_ISOERREN	BIT(15)
393
394/* DMA_EP_IEN - bitmasks. */
395#define DMA_EP_IEN(index)	(1 << (index))
396#define DMA_EP_IEN_EP_OUT0	BIT(0)
397#define DMA_EP_IEN_EP_IN0	BIT(16)
398
399/* DMA_EP_ISTS - bitmasks. */
400#define DMA_EP_ISTS(index)	(1 << (index))
401#define DMA_EP_ISTS_EP_OUT0	BIT(0)
402#define DMA_EP_ISTS_EP_IN0	BIT(16)
403
404#define gadget_to_cdns2_device(g) (container_of(g, struct cdns2_device, gadget))
405#define ep_to_cdns2_ep(ep) (container_of(ep, struct cdns2_endpoint, endpoint))
406
407/*-------------------------------------------------------------------------*/
408#define TRBS_PER_SEGMENT	600
409#define ISO_MAX_INTERVAL	8
410#define MAX_TRB_LENGTH		BIT(16)
411#define MAX_ISO_SIZE		3076
412/*
413 * To improve performance the TRB buffer pointers can't cross
414 * 4KB boundaries.
415 */
416#define TRB_MAX_ISO_BUFF_SHIFT	12
417#define TRB_MAX_ISO_BUFF_SIZE	BIT(TRB_MAX_ISO_BUFF_SHIFT)
418/* How much data is left before the 4KB boundary? */
419#define TRB_BUFF_LEN_UP_TO_BOUNDARY(addr) (TRB_MAX_ISO_BUFF_SIZE - \
420					((addr) & (TRB_MAX_ISO_BUFF_SIZE - 1)))
421
422#if TRBS_PER_SEGMENT < 2
423#error "Incorrect TRBS_PER_SEGMENT. Minimal Transfer Ring size is 2."
424#endif
425
426/**
427 * struct cdns2_trb - represent Transfer Descriptor block.
428 * @buffer: pointer to buffer data.
429 * @length: length of data.
430 * @control: control flags.
431 *
432 * This structure describes transfer block handled by DMA module.
433 */
434struct cdns2_trb {
435	__le32 buffer;
436	__le32 length;
437	__le32 control;
438};
439
440#define TRB_SIZE		(sizeof(struct cdns2_trb))
441/*
442 * These two extra TRBs are reserved for isochronous transfer
443 * to inject 0 length packet and extra LINK TRB to synchronize the ISO transfer.
444 */
445#define TRB_ISO_RESERVED	2
446#define TR_SEG_SIZE		(TRB_SIZE * (TRBS_PER_SEGMENT + TRB_ISO_RESERVED))
447
448/* TRB bit mask. */
449#define TRB_TYPE_BITMASK	GENMASK(15, 10)
450#define TRB_TYPE(p)		((p) << 10)
451#define TRB_FIELD_TO_TYPE(p)	(((p) & TRB_TYPE_BITMASK) >> 10)
452
453/* TRB type IDs. */
454/* Used for Bulk, Interrupt, ISOC, and control data stage. */
455#define TRB_NORMAL		1
456/* TRB for linking ring segments. */
457#define TRB_LINK		6
458
459/* Cycle bit - indicates TRB ownership by driver or hw. */
460#define TRB_CYCLE		BIT(0)
461/*
462 * When set to '1', the device will toggle its interpretation of the Cycle bit.
463 */
464#define TRB_TOGGLE		BIT(1)
465/* Interrupt on short packet. */
466#define TRB_ISP			BIT(2)
467/* Chain bit associate this TRB with next one TRB. */
468#define TRB_CHAIN		BIT(4)
469/* Interrupt on completion. */
470#define TRB_IOC			BIT(5)
471
472/* Transfer_len bitmasks. */
473#define TRB_LEN(p)		((p) & GENMASK(16, 0))
474#define TRB_BURST(p)		(((p) << 24) & GENMASK(31, 24))
475#define TRB_FIELD_TO_BURST(p)	(((p) & GENMASK(31, 24)) >> 24)
476
477/* Data buffer pointer bitmasks. */
478#define TRB_BUFFER(p)		((p) & GENMASK(31, 0))
479
480/*-------------------------------------------------------------------------*/
481/* Driver numeric constants. */
482
483/* Maximum address that can be assigned to device. */
484#define USB_DEVICE_MAX_ADDRESS	127
485
486/* One control and 15 IN and 15 OUT endpoints. */
487#define CDNS2_ENDPOINTS_NUM	31
488
489#define CDNS2_EP_ZLP_BUF_SIZE	512
490
491/*-------------------------------------------------------------------------*/
492/* Used structures. */
493
494struct cdns2_device;
495
496/**
497 * struct cdns2_ring - transfer ring representation.
498 * @trbs: pointer to transfer ring.
499 * @dma: dma address of transfer ring.
500 * @free_trbs: number of free TRBs in transfer ring.
501 * @pcs: producer cycle state.
502 * @ccs: consumer cycle state.
503 * @enqueue: enqueue index in transfer ring.
504 * @dequeue: dequeue index in transfer ring.
505 */
506struct cdns2_ring {
507	struct cdns2_trb *trbs;
508	dma_addr_t dma;
509	int free_trbs;
510	u8 pcs;
511	u8 ccs;
512	int enqueue;
513	int dequeue;
514};
515
516/**
517 * struct cdns2_endpoint - extended device side representation of USB endpoint.
518 * @endpoint: usb endpoint.
519 * @pending_list: list of requests queuing on transfer ring.
520 * @deferred_list: list of requests waiting for queuing on transfer ring.
521 * @pdev: device associated with endpoint.
522 * @name: a human readable name e.g. ep1out.
523 * @ring: transfer ring associated with endpoint.
524 * @ep_state: state of endpoint.
525 * @idx: index of endpoint in pdev->eps table.
526 * @dir: endpoint direction.
527 * @num: endpoint number (1 - 15).
528 * @type: set to bmAttributes & USB_ENDPOINT_XFERTYPE_MASK.
529 * @interval: interval between packets used for ISOC and Interrupt endpoint.
530 * @buffering: on-chip buffers assigned to endpoint.
531 * @trb_burst_size: number of burst used in TRB.
532 * @skip: Sometimes the controller cannot process isochronous endpoint ring
533 *        quickly enough and it will miss some isoc tds on the ring and
534 *        generate ISO transmition error.
535 *        Driver sets skip flag when receive a ISO transmition error and
536 *        process the missed TDs on the endpoint ring.
537 * @wa1_set: use WA1.
538 * @wa1_trb: TRB assigned to WA1.
539 * @wa1_trb_index: TRB index for WA1.
540 * @wa1_cycle_bit: correct cycle bit for WA1.
541 */
542struct cdns2_endpoint {
543	struct usb_ep endpoint;
544	struct list_head pending_list;
545	struct list_head deferred_list;
546
547	struct cdns2_device	*pdev;
548	char name[20];
549
550	struct cdns2_ring ring;
551
552#define EP_ENABLED		BIT(0)
553#define EP_STALLED		BIT(1)
554#define EP_STALL_PENDING	BIT(2)
555#define EP_WEDGE		BIT(3)
556#define	EP_CLAIMED		BIT(4)
557#define EP_RING_FULL		BIT(5)
558#define EP_DEFERRED_DRDY	BIT(6)
559
560	u32 ep_state;
561
562	u8 idx;
563	u8 dir;
564	u8 num;
565	u8 type;
566	int interval;
567	u8 buffering;
568	u8 trb_burst_size;
569	bool skip;
570
571	unsigned int wa1_set:1;
572	struct cdns2_trb *wa1_trb;
573	unsigned int wa1_trb_index;
574	unsigned int wa1_cycle_bit:1;
575};
576
577/**
578 * struct cdns2_request - extended device side representation of usb_request
579 *                        object.
580 * @request: generic usb_request object describing single I/O request.
581 * @pep: extended representation of usb_ep object.
582 * @trb: the first TRB association with this request.
583 * @start_trb: number of the first TRB in transfer ring.
584 * @end_trb: number of the last TRB in transfer ring.
585 * @list: used for queuing request in lists.
586 * @finished_trb: number of trb has already finished per request.
587 * @num_of_trb: how many trbs are associated with request.
588 */
589struct cdns2_request {
590	struct usb_request request;
591	struct cdns2_endpoint *pep;
592	struct cdns2_trb *trb;
593	int start_trb;
594	int end_trb;
595	struct list_head list;
596	int finished_trb;
597	int num_of_trb;
598};
599
600#define to_cdns2_request(r) (container_of(r, struct cdns2_request, request))
601
602/* Stages used during enumeration process.*/
603#define CDNS2_SETUP_STAGE		0x0
604#define CDNS2_DATA_STAGE		0x1
605#define CDNS2_STATUS_STAGE		0x2
606
607/**
608 * struct cdns2_device - represent USB device.
609 * @dev: pointer to device structure associated whit this controller.
610 * @gadget: device side representation of the peripheral controller.
611 * @gadget_driver: pointer to the gadget driver.
612 * @lock: for synchronizing.
613 * @irq: interrupt line number.
614 * @regs: base address for registers
615 * @usb_regs: base address for common USB registers.
616 * @ep0_regs: base address for endpoint 0 related registers.
617 * @epx_regs: base address for all none control endpoint registers.
618 * @interrupt_regs: base address for interrupt handling related registers.
619 * @adma_regs: base address for ADMA registers.
620 * @eps_dma_pool: endpoint Transfer Ring pool.
621 * @setup: used while processing usb control requests.
622 * @ep0_preq: private request used while handling EP0.
623 * @ep0_stage: ep0 stage during enumeration process.
624 * @zlp_buf: zlp buffer.
625 * @dev_address: device address assigned by host.
626 * @eps: array of objects describing endpoints.
627 * @selected_ep: actually selected endpoint. It's used only to improve
628 *      performance by limiting access to dma_ep_sel register.
629 * @is_selfpowered: device is self powered.
630 * @may_wakeup: allows device to remote wakeup the host.
631 * @status_completion_no_call: indicate that driver is waiting for status
632 *      stage completion. It's used in deferred SET_CONFIGURATION request.
633 * @in_lpm: indicate the controller is in low power mode.
634 * @pending_status_wq: workqueue handling status stage for deferred requests.
635 * @pending_status_request: request for which status stage was deferred.
636 * @eps_supported: endpoints supported by controller in form:
637 *      bit: 0 - ep0, 1 - epOut1, 2 - epIn1, 3 - epOut2 ...
638 * @burst_opt: array with the best burst size value for different TRB size.
639 * @onchip_tx_buf: size of transmit on-chip buffer in KB.
640 * @onchip_rx_buf: size of receive on-chip buffer in KB.
641 */
642struct cdns2_device {
643	struct device *dev;
644	struct usb_gadget gadget;
645	struct usb_gadget_driver *gadget_driver;
646
647	/* generic spin-lock for drivers */
648	spinlock_t lock;
649	int irq;
650	void __iomem *regs;
651	struct cdns2_usb_regs __iomem *usb_regs;
652	struct cdns2_ep0_regs __iomem *ep0_regs;
653	struct cdns2_epx_regs __iomem *epx_regs;
654	struct cdns2_interrupt_regs __iomem *interrupt_regs;
655	struct cdns2_adma_regs __iomem *adma_regs;
656	struct dma_pool *eps_dma_pool;
657	struct usb_ctrlrequest setup;
658	struct cdns2_request ep0_preq;
659	u8 ep0_stage;
660	void *zlp_buf;
661	u8 dev_address;
662	struct cdns2_endpoint eps[CDNS2_ENDPOINTS_NUM];
663	u32 selected_ep;
664	bool is_selfpowered;
665	bool may_wakeup;
666	bool status_completion_no_call;
667	bool in_lpm;
668	struct work_struct pending_status_wq;
669	struct usb_request *pending_status_request;
670	u32 eps_supported;
671	u8 burst_opt[MAX_ISO_SIZE + 1];
672
673	/*in KB */
674	u16 onchip_tx_buf;
675	u16 onchip_rx_buf;
676};
677
678#define CDNS2_IF_EP_EXIST(pdev, ep_num, dir) \
679			 ((pdev)->eps_supported & \
680			 (BIT(ep_num) << ((dir) ? 0 : 16)))
681
682dma_addr_t cdns2_trb_virt_to_dma(struct cdns2_endpoint *pep,
683				 struct cdns2_trb *trb);
684void cdns2_pending_setup_status_handler(struct work_struct *work);
685void cdns2_select_ep(struct cdns2_device *pdev, u32 ep);
686struct cdns2_request *cdns2_next_preq(struct list_head *list);
687struct usb_request *cdns2_gadget_ep_alloc_request(struct usb_ep *ep,
688						  gfp_t gfp_flags);
689void cdns2_gadget_ep_free_request(struct usb_ep *ep,
690				  struct usb_request *request);
691int cdns2_gadget_ep_dequeue(struct usb_ep *ep, struct usb_request *request);
692void cdns2_gadget_giveback(struct cdns2_endpoint *pep,
693			   struct cdns2_request *priv_req,
694			   int status);
695void cdns2_init_ep0(struct cdns2_device *pdev, struct cdns2_endpoint *pep);
696void cdns2_ep0_config(struct cdns2_device *pdev);
697void cdns2_handle_ep0_interrupt(struct cdns2_device *pdev, int dir);
698void cdns2_handle_setup_packet(struct cdns2_device *pdev);
699int cdns2_gadget_resume(struct cdns2_device *pdev, bool hibernated);
700int cdns2_gadget_suspend(struct cdns2_device *pdev);
701void cdns2_gadget_remove(struct cdns2_device *pdev);
702int cdns2_gadget_init(struct cdns2_device *pdev);
703void set_reg_bit_8(void __iomem *ptr, u8 mask);
704int cdns2_halt_endpoint(struct cdns2_device *pdev, struct cdns2_endpoint *pep,
705			int value);
706
707#endif /* __LINUX_CDNS2_GADGET */
708