1// SPDX-License-Identifier: GPL-2.0 2/* 3 * su.c: Small serial driver for keyboard/mouse interface on sparc32/PCI 4 * 5 * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) 6 * Copyright (C) 1998-1999 Pete Zaitcev (zaitcev@yahoo.com) 7 * 8 * This is mainly a variation of 8250.c, credits go to authors mentioned 9 * therein. In fact this driver should be merged into the generic 8250.c 10 * infrastructure perhaps using a 8250_sparc.c module. 11 * 12 * Fixed to use tty_get_baud_rate(). 13 * Theodore Ts'o <tytso@mit.edu>, 2001-Oct-12 14 * 15 * Converted to new 2.5.x UART layer. 16 * David S. Miller (davem@davemloft.net), 2002-Jul-29 17 */ 18 19#include <linux/module.h> 20#include <linux/kernel.h> 21#include <linux/spinlock.h> 22#include <linux/errno.h> 23#include <linux/tty.h> 24#include <linux/tty_flip.h> 25#include <linux/major.h> 26#include <linux/string.h> 27#include <linux/ptrace.h> 28#include <linux/ioport.h> 29#include <linux/circ_buf.h> 30#include <linux/serial.h> 31#include <linux/sysrq.h> 32#include <linux/console.h> 33#include <linux/slab.h> 34#ifdef CONFIG_SERIO 35#include <linux/serio.h> 36#endif 37#include <linux/serial_reg.h> 38#include <linux/init.h> 39#include <linux/delay.h> 40#include <linux/of.h> 41#include <linux/platform_device.h> 42 43#include <linux/io.h> 44#include <asm/irq.h> 45#include <asm/setup.h> 46 47#include <linux/serial_core.h> 48#include <linux/sunserialcore.h> 49 50/* We are on a NS PC87303 clocked with 24.0 MHz, which results 51 * in a UART clock of 1.8462 MHz. 52 */ 53#define SU_BASE_BAUD (1846200 / 16) 54 55enum su_type { SU_PORT_NONE, SU_PORT_MS, SU_PORT_KBD, SU_PORT_PORT }; 56static char *su_typev[] = { "su(???)", "su(mouse)", "su(kbd)", "su(serial)" }; 57 58struct serial_uart_config { 59 char *name; 60 int dfl_xmit_fifo_size; 61 int flags; 62}; 63 64/* 65 * Here we define the default xmit fifo size used for each type of UART. 66 */ 67static const struct serial_uart_config uart_config[] = { 68 { "unknown", 1, 0 }, 69 { "8250", 1, 0 }, 70 { "16450", 1, 0 }, 71 { "16550", 1, 0 }, 72 { "16550A", 16, UART_CLEAR_FIFO | UART_USE_FIFO }, 73 { "Cirrus", 1, 0 }, 74 { "ST16650", 1, UART_CLEAR_FIFO | UART_STARTECH }, 75 { "ST16650V2", 32, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH }, 76 { "TI16750", 64, UART_CLEAR_FIFO | UART_USE_FIFO }, 77 { "Startech", 1, 0 }, 78 { "16C950/954", 128, UART_CLEAR_FIFO | UART_USE_FIFO }, 79 { "ST16654", 64, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH }, 80 { "XR16850", 128, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH }, 81 { "RSA", 2048, UART_CLEAR_FIFO | UART_USE_FIFO } 82}; 83 84struct uart_sunsu_port { 85 struct uart_port port; 86 unsigned char acr; 87 unsigned char ier; 88 unsigned short rev; 89 unsigned char lcr; 90 unsigned int lsr_break_flag; 91 unsigned int cflag; 92 93 /* Probing information. */ 94 enum su_type su_type; 95 unsigned int type_probed; /* XXX Stupid */ 96 unsigned long reg_size; 97 98#ifdef CONFIG_SERIO 99 struct serio serio; 100 int serio_open; 101#endif 102}; 103 104static unsigned int serial_in(struct uart_sunsu_port *up, int offset) 105{ 106 offset <<= up->port.regshift; 107 108 switch (up->port.iotype) { 109 case UPIO_HUB6: 110 outb(up->port.hub6 - 1 + offset, up->port.iobase); 111 return inb(up->port.iobase + 1); 112 113 case UPIO_MEM: 114 return readb(up->port.membase + offset); 115 116 default: 117 return inb(up->port.iobase + offset); 118 } 119} 120 121static void serial_out(struct uart_sunsu_port *up, int offset, int value) 122{ 123#ifndef CONFIG_SPARC64 124 /* 125 * MrCoffee has weird schematics: IRQ4 & P10(?) pins of SuperIO are 126 * connected with a gate then go to SlavIO. When IRQ4 goes tristated 127 * gate outputs a logical one. Since we use level triggered interrupts 128 * we have lockup and watchdog reset. We cannot mask IRQ because 129 * keyboard shares IRQ with us (Word has it as Bob Smelik's design). 130 * This problem is similar to what Alpha people suffer, see 131 * 8250_alpha.c. 132 */ 133 if (offset == UART_MCR) 134 value |= UART_MCR_OUT2; 135#endif 136 offset <<= up->port.regshift; 137 138 switch (up->port.iotype) { 139 case UPIO_HUB6: 140 outb(up->port.hub6 - 1 + offset, up->port.iobase); 141 outb(value, up->port.iobase + 1); 142 break; 143 144 case UPIO_MEM: 145 writeb(value, up->port.membase + offset); 146 break; 147 148 default: 149 outb(value, up->port.iobase + offset); 150 } 151} 152 153/* 154 * We used to support using pause I/O for certain machines. We 155 * haven't supported this for a while, but just in case it's badly 156 * needed for certain old 386 machines, I've left these #define's 157 * in.... 158 */ 159#define serial_inp(up, offset) serial_in(up, offset) 160#define serial_outp(up, offset, value) serial_out(up, offset, value) 161 162 163/* 164 * For the 16C950 165 */ 166static void serial_icr_write(struct uart_sunsu_port *up, int offset, int value) 167{ 168 serial_out(up, UART_SCR, offset); 169 serial_out(up, UART_ICR, value); 170} 171 172#if 0 /* Unused currently */ 173static unsigned int serial_icr_read(struct uart_sunsu_port *up, int offset) 174{ 175 unsigned int value; 176 177 serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD); 178 serial_out(up, UART_SCR, offset); 179 value = serial_in(up, UART_ICR); 180 serial_icr_write(up, UART_ACR, up->acr); 181 182 return value; 183} 184#endif 185 186#ifdef CONFIG_SERIAL_8250_RSA 187/* 188 * Attempts to turn on the RSA FIFO. Returns zero on failure. 189 * We set the port uart clock rate if we succeed. 190 */ 191static int __enable_rsa(struct uart_sunsu_port *up) 192{ 193 unsigned char mode; 194 int result; 195 196 mode = serial_inp(up, UART_RSA_MSR); 197 result = mode & UART_RSA_MSR_FIFO; 198 199 if (!result) { 200 serial_outp(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO); 201 mode = serial_inp(up, UART_RSA_MSR); 202 result = mode & UART_RSA_MSR_FIFO; 203 } 204 205 if (result) 206 up->port.uartclk = SERIAL_RSA_BAUD_BASE * 16; 207 208 return result; 209} 210 211static void enable_rsa(struct uart_sunsu_port *up) 212{ 213 if (up->port.type == PORT_RSA) { 214 if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) { 215 spin_lock_irq(&up->port.lock); 216 __enable_rsa(up); 217 spin_unlock_irq(&up->port.lock); 218 } 219 if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) 220 serial_outp(up, UART_RSA_FRR, 0); 221 } 222} 223 224/* 225 * Attempts to turn off the RSA FIFO. Returns zero on failure. 226 * It is unknown why interrupts were disabled in here. However, 227 * the caller is expected to preserve this behaviour by grabbing 228 * the spinlock before calling this function. 229 */ 230static void disable_rsa(struct uart_sunsu_port *up) 231{ 232 unsigned char mode; 233 int result; 234 235 if (up->port.type == PORT_RSA && 236 up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) { 237 spin_lock_irq(&up->port.lock); 238 239 mode = serial_inp(up, UART_RSA_MSR); 240 result = !(mode & UART_RSA_MSR_FIFO); 241 242 if (!result) { 243 serial_outp(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO); 244 mode = serial_inp(up, UART_RSA_MSR); 245 result = !(mode & UART_RSA_MSR_FIFO); 246 } 247 248 if (result) 249 up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16; 250 spin_unlock_irq(&up->port.lock); 251 } 252} 253#endif /* CONFIG_SERIAL_8250_RSA */ 254 255static inline void __stop_tx(struct uart_sunsu_port *p) 256{ 257 if (p->ier & UART_IER_THRI) { 258 p->ier &= ~UART_IER_THRI; 259 serial_out(p, UART_IER, p->ier); 260 } 261} 262 263static void sunsu_stop_tx(struct uart_port *port) 264{ 265 struct uart_sunsu_port *up = 266 container_of(port, struct uart_sunsu_port, port); 267 268 __stop_tx(up); 269 270 /* 271 * We really want to stop the transmitter from sending. 272 */ 273 if (up->port.type == PORT_16C950) { 274 up->acr |= UART_ACR_TXDIS; 275 serial_icr_write(up, UART_ACR, up->acr); 276 } 277} 278 279static void sunsu_start_tx(struct uart_port *port) 280{ 281 struct uart_sunsu_port *up = 282 container_of(port, struct uart_sunsu_port, port); 283 284 if (!(up->ier & UART_IER_THRI)) { 285 up->ier |= UART_IER_THRI; 286 serial_out(up, UART_IER, up->ier); 287 } 288 289 /* 290 * Re-enable the transmitter if we disabled it. 291 */ 292 if (up->port.type == PORT_16C950 && up->acr & UART_ACR_TXDIS) { 293 up->acr &= ~UART_ACR_TXDIS; 294 serial_icr_write(up, UART_ACR, up->acr); 295 } 296} 297 298static void sunsu_stop_rx(struct uart_port *port) 299{ 300 struct uart_sunsu_port *up = 301 container_of(port, struct uart_sunsu_port, port); 302 303 up->ier &= ~UART_IER_RLSI; 304 up->port.read_status_mask &= ~UART_LSR_DR; 305 serial_out(up, UART_IER, up->ier); 306} 307 308static void sunsu_enable_ms(struct uart_port *port) 309{ 310 struct uart_sunsu_port *up = 311 container_of(port, struct uart_sunsu_port, port); 312 unsigned long flags; 313 314 spin_lock_irqsave(&up->port.lock, flags); 315 up->ier |= UART_IER_MSI; 316 serial_out(up, UART_IER, up->ier); 317 spin_unlock_irqrestore(&up->port.lock, flags); 318} 319 320static void 321receive_chars(struct uart_sunsu_port *up, unsigned char *status) 322{ 323 struct tty_port *port = &up->port.state->port; 324 unsigned char ch, flag; 325 int max_count = 256; 326 int saw_console_brk = 0; 327 328 do { 329 ch = serial_inp(up, UART_RX); 330 flag = TTY_NORMAL; 331 up->port.icount.rx++; 332 333 if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE | 334 UART_LSR_FE | UART_LSR_OE))) { 335 /* 336 * For statistics only 337 */ 338 if (*status & UART_LSR_BI) { 339 *status &= ~(UART_LSR_FE | UART_LSR_PE); 340 up->port.icount.brk++; 341 if (up->port.cons != NULL && 342 up->port.line == up->port.cons->index) 343 saw_console_brk = 1; 344 /* 345 * We do the SysRQ and SAK checking 346 * here because otherwise the break 347 * may get masked by ignore_status_mask 348 * or read_status_mask. 349 */ 350 if (uart_handle_break(&up->port)) 351 goto ignore_char; 352 } else if (*status & UART_LSR_PE) 353 up->port.icount.parity++; 354 else if (*status & UART_LSR_FE) 355 up->port.icount.frame++; 356 if (*status & UART_LSR_OE) 357 up->port.icount.overrun++; 358 359 /* 360 * Mask off conditions which should be ingored. 361 */ 362 *status &= up->port.read_status_mask; 363 364 if (up->port.cons != NULL && 365 up->port.line == up->port.cons->index) { 366 /* Recover the break flag from console xmit */ 367 *status |= up->lsr_break_flag; 368 up->lsr_break_flag = 0; 369 } 370 371 if (*status & UART_LSR_BI) { 372 flag = TTY_BREAK; 373 } else if (*status & UART_LSR_PE) 374 flag = TTY_PARITY; 375 else if (*status & UART_LSR_FE) 376 flag = TTY_FRAME; 377 } 378 if (uart_handle_sysrq_char(&up->port, ch)) 379 goto ignore_char; 380 if ((*status & up->port.ignore_status_mask) == 0) 381 tty_insert_flip_char(port, ch, flag); 382 if (*status & UART_LSR_OE) 383 /* 384 * Overrun is special, since it's reported 385 * immediately, and doesn't affect the current 386 * character. 387 */ 388 tty_insert_flip_char(port, 0, TTY_OVERRUN); 389 ignore_char: 390 *status = serial_inp(up, UART_LSR); 391 } while ((*status & UART_LSR_DR) && (max_count-- > 0)); 392 393 if (saw_console_brk) 394 sun_do_break(); 395} 396 397static void transmit_chars(struct uart_sunsu_port *up) 398{ 399 struct circ_buf *xmit = &up->port.state->xmit; 400 int count; 401 402 if (up->port.x_char) { 403 serial_outp(up, UART_TX, up->port.x_char); 404 up->port.icount.tx++; 405 up->port.x_char = 0; 406 return; 407 } 408 if (uart_tx_stopped(&up->port)) { 409 sunsu_stop_tx(&up->port); 410 return; 411 } 412 if (uart_circ_empty(xmit)) { 413 __stop_tx(up); 414 return; 415 } 416 417 count = up->port.fifosize; 418 do { 419 serial_out(up, UART_TX, xmit->buf[xmit->tail]); 420 uart_xmit_advance(&up->port, 1); 421 if (uart_circ_empty(xmit)) 422 break; 423 } while (--count > 0); 424 425 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) 426 uart_write_wakeup(&up->port); 427 428 if (uart_circ_empty(xmit)) 429 __stop_tx(up); 430} 431 432static void check_modem_status(struct uart_sunsu_port *up) 433{ 434 int status; 435 436 status = serial_in(up, UART_MSR); 437 438 if ((status & UART_MSR_ANY_DELTA) == 0) 439 return; 440 441 if (status & UART_MSR_TERI) 442 up->port.icount.rng++; 443 if (status & UART_MSR_DDSR) 444 up->port.icount.dsr++; 445 if (status & UART_MSR_DDCD) 446 uart_handle_dcd_change(&up->port, status & UART_MSR_DCD); 447 if (status & UART_MSR_DCTS) 448 uart_handle_cts_change(&up->port, status & UART_MSR_CTS); 449 450 wake_up_interruptible(&up->port.state->port.delta_msr_wait); 451} 452 453static irqreturn_t sunsu_serial_interrupt(int irq, void *dev_id) 454{ 455 struct uart_sunsu_port *up = dev_id; 456 unsigned long flags; 457 unsigned char status; 458 459 spin_lock_irqsave(&up->port.lock, flags); 460 461 do { 462 status = serial_inp(up, UART_LSR); 463 if (status & UART_LSR_DR) 464 receive_chars(up, &status); 465 check_modem_status(up); 466 if (status & UART_LSR_THRE) 467 transmit_chars(up); 468 469 tty_flip_buffer_push(&up->port.state->port); 470 471 } while (!(serial_in(up, UART_IIR) & UART_IIR_NO_INT)); 472 473 spin_unlock_irqrestore(&up->port.lock, flags); 474 475 return IRQ_HANDLED; 476} 477 478/* Separate interrupt handling path for keyboard/mouse ports. */ 479 480static void 481sunsu_change_speed(struct uart_port *port, unsigned int cflag, 482 unsigned int iflag, unsigned int quot); 483 484static void sunsu_change_mouse_baud(struct uart_sunsu_port *up) 485{ 486 unsigned int cur_cflag = up->cflag; 487 int quot, new_baud; 488 489 up->cflag &= ~CBAUD; 490 up->cflag |= suncore_mouse_baud_cflag_next(cur_cflag, &new_baud); 491 492 quot = up->port.uartclk / (16 * new_baud); 493 494 sunsu_change_speed(&up->port, up->cflag, 0, quot); 495} 496 497static void receive_kbd_ms_chars(struct uart_sunsu_port *up, int is_break) 498{ 499 do { 500 unsigned char ch = serial_inp(up, UART_RX); 501 502 /* Stop-A is handled by drivers/char/keyboard.c now. */ 503 if (up->su_type == SU_PORT_KBD) { 504#ifdef CONFIG_SERIO 505 serio_interrupt(&up->serio, ch, 0); 506#endif 507 } else if (up->su_type == SU_PORT_MS) { 508 int ret = suncore_mouse_baud_detection(ch, is_break); 509 510 switch (ret) { 511 case 2: 512 sunsu_change_mouse_baud(up); 513 fallthrough; 514 case 1: 515 break; 516 517 case 0: 518#ifdef CONFIG_SERIO 519 serio_interrupt(&up->serio, ch, 0); 520#endif 521 break; 522 } 523 } 524 } while (serial_in(up, UART_LSR) & UART_LSR_DR); 525} 526 527static irqreturn_t sunsu_kbd_ms_interrupt(int irq, void *dev_id) 528{ 529 struct uart_sunsu_port *up = dev_id; 530 531 if (!(serial_in(up, UART_IIR) & UART_IIR_NO_INT)) { 532 unsigned char status = serial_inp(up, UART_LSR); 533 534 if ((status & UART_LSR_DR) || (status & UART_LSR_BI)) 535 receive_kbd_ms_chars(up, (status & UART_LSR_BI) != 0); 536 } 537 538 return IRQ_HANDLED; 539} 540 541static unsigned int sunsu_tx_empty(struct uart_port *port) 542{ 543 struct uart_sunsu_port *up = 544 container_of(port, struct uart_sunsu_port, port); 545 unsigned long flags; 546 unsigned int ret; 547 548 spin_lock_irqsave(&up->port.lock, flags); 549 ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; 550 spin_unlock_irqrestore(&up->port.lock, flags); 551 552 return ret; 553} 554 555static unsigned int sunsu_get_mctrl(struct uart_port *port) 556{ 557 struct uart_sunsu_port *up = 558 container_of(port, struct uart_sunsu_port, port); 559 unsigned char status; 560 unsigned int ret; 561 562 status = serial_in(up, UART_MSR); 563 564 ret = 0; 565 if (status & UART_MSR_DCD) 566 ret |= TIOCM_CAR; 567 if (status & UART_MSR_RI) 568 ret |= TIOCM_RNG; 569 if (status & UART_MSR_DSR) 570 ret |= TIOCM_DSR; 571 if (status & UART_MSR_CTS) 572 ret |= TIOCM_CTS; 573 return ret; 574} 575 576static void sunsu_set_mctrl(struct uart_port *port, unsigned int mctrl) 577{ 578 struct uart_sunsu_port *up = 579 container_of(port, struct uart_sunsu_port, port); 580 unsigned char mcr = 0; 581 582 if (mctrl & TIOCM_RTS) 583 mcr |= UART_MCR_RTS; 584 if (mctrl & TIOCM_DTR) 585 mcr |= UART_MCR_DTR; 586 if (mctrl & TIOCM_OUT1) 587 mcr |= UART_MCR_OUT1; 588 if (mctrl & TIOCM_OUT2) 589 mcr |= UART_MCR_OUT2; 590 if (mctrl & TIOCM_LOOP) 591 mcr |= UART_MCR_LOOP; 592 593 serial_out(up, UART_MCR, mcr); 594} 595 596static void sunsu_break_ctl(struct uart_port *port, int break_state) 597{ 598 struct uart_sunsu_port *up = 599 container_of(port, struct uart_sunsu_port, port); 600 unsigned long flags; 601 602 spin_lock_irqsave(&up->port.lock, flags); 603 if (break_state == -1) 604 up->lcr |= UART_LCR_SBC; 605 else 606 up->lcr &= ~UART_LCR_SBC; 607 serial_out(up, UART_LCR, up->lcr); 608 spin_unlock_irqrestore(&up->port.lock, flags); 609} 610 611static int sunsu_startup(struct uart_port *port) 612{ 613 struct uart_sunsu_port *up = 614 container_of(port, struct uart_sunsu_port, port); 615 unsigned long flags; 616 int retval; 617 618 if (up->port.type == PORT_16C950) { 619 /* Wake up and initialize UART */ 620 up->acr = 0; 621 serial_outp(up, UART_LCR, 0xBF); 622 serial_outp(up, UART_EFR, UART_EFR_ECB); 623 serial_outp(up, UART_IER, 0); 624 serial_outp(up, UART_LCR, 0); 625 serial_icr_write(up, UART_CSR, 0); /* Reset the UART */ 626 serial_outp(up, UART_LCR, 0xBF); 627 serial_outp(up, UART_EFR, UART_EFR_ECB); 628 serial_outp(up, UART_LCR, 0); 629 } 630 631#ifdef CONFIG_SERIAL_8250_RSA 632 /* 633 * If this is an RSA port, see if we can kick it up to the 634 * higher speed clock. 635 */ 636 enable_rsa(up); 637#endif 638 639 /* 640 * Clear the FIFO buffers and disable them. 641 * (they will be reenabled in set_termios()) 642 */ 643 if (uart_config[up->port.type].flags & UART_CLEAR_FIFO) { 644 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); 645 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | 646 UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); 647 serial_outp(up, UART_FCR, 0); 648 } 649 650 /* 651 * Clear the interrupt registers. 652 */ 653 (void) serial_inp(up, UART_LSR); 654 (void) serial_inp(up, UART_RX); 655 (void) serial_inp(up, UART_IIR); 656 (void) serial_inp(up, UART_MSR); 657 658 /* 659 * At this point, there's no way the LSR could still be 0xff; 660 * if it is, then bail out, because there's likely no UART 661 * here. 662 */ 663 if (!(up->port.flags & UPF_BUGGY_UART) && 664 (serial_inp(up, UART_LSR) == 0xff)) { 665 printk("ttyS%d: LSR safety check engaged!\n", up->port.line); 666 return -ENODEV; 667 } 668 669 if (up->su_type != SU_PORT_PORT) { 670 retval = request_irq(up->port.irq, sunsu_kbd_ms_interrupt, 671 IRQF_SHARED, su_typev[up->su_type], up); 672 } else { 673 retval = request_irq(up->port.irq, sunsu_serial_interrupt, 674 IRQF_SHARED, su_typev[up->su_type], up); 675 } 676 if (retval) { 677 printk("su: Cannot register IRQ %d\n", up->port.irq); 678 return retval; 679 } 680 681 /* 682 * Now, initialize the UART 683 */ 684 serial_outp(up, UART_LCR, UART_LCR_WLEN8); 685 686 spin_lock_irqsave(&up->port.lock, flags); 687 688 up->port.mctrl |= TIOCM_OUT2; 689 690 sunsu_set_mctrl(&up->port, up->port.mctrl); 691 spin_unlock_irqrestore(&up->port.lock, flags); 692 693 /* 694 * Finally, enable interrupts. Note: Modem status interrupts 695 * are set via set_termios(), which will be occurring imminently 696 * anyway, so we don't enable them here. 697 */ 698 up->ier = UART_IER_RLSI | UART_IER_RDI; 699 serial_outp(up, UART_IER, up->ier); 700 701 if (up->port.flags & UPF_FOURPORT) { 702 unsigned int icp; 703 /* 704 * Enable interrupts on the AST Fourport board 705 */ 706 icp = (up->port.iobase & 0xfe0) | 0x01f; 707 outb_p(0x80, icp); 708 (void) inb_p(icp); 709 } 710 711 /* 712 * And clear the interrupt registers again for luck. 713 */ 714 (void) serial_inp(up, UART_LSR); 715 (void) serial_inp(up, UART_RX); 716 (void) serial_inp(up, UART_IIR); 717 (void) serial_inp(up, UART_MSR); 718 719 return 0; 720} 721 722static void sunsu_shutdown(struct uart_port *port) 723{ 724 struct uart_sunsu_port *up = 725 container_of(port, struct uart_sunsu_port, port); 726 unsigned long flags; 727 728 /* 729 * Disable interrupts from this port 730 */ 731 up->ier = 0; 732 serial_outp(up, UART_IER, 0); 733 734 spin_lock_irqsave(&up->port.lock, flags); 735 if (up->port.flags & UPF_FOURPORT) { 736 /* reset interrupts on the AST Fourport board */ 737 inb((up->port.iobase & 0xfe0) | 0x1f); 738 up->port.mctrl |= TIOCM_OUT1; 739 } else 740 up->port.mctrl &= ~TIOCM_OUT2; 741 742 sunsu_set_mctrl(&up->port, up->port.mctrl); 743 spin_unlock_irqrestore(&up->port.lock, flags); 744 745 /* 746 * Disable break condition and FIFOs 747 */ 748 serial_out(up, UART_LCR, serial_inp(up, UART_LCR) & ~UART_LCR_SBC); 749 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | 750 UART_FCR_CLEAR_RCVR | 751 UART_FCR_CLEAR_XMIT); 752 serial_outp(up, UART_FCR, 0); 753 754#ifdef CONFIG_SERIAL_8250_RSA 755 /* 756 * Reset the RSA board back to 115kbps compat mode. 757 */ 758 disable_rsa(up); 759#endif 760 761 /* 762 * Read data port to reset things. 763 */ 764 (void) serial_in(up, UART_RX); 765 766 free_irq(up->port.irq, up); 767} 768 769static void 770sunsu_change_speed(struct uart_port *port, unsigned int cflag, 771 unsigned int iflag, unsigned int quot) 772{ 773 struct uart_sunsu_port *up = 774 container_of(port, struct uart_sunsu_port, port); 775 unsigned char cval, fcr = 0; 776 unsigned long flags; 777 778 switch (cflag & CSIZE) { 779 case CS5: 780 cval = 0x00; 781 break; 782 case CS6: 783 cval = 0x01; 784 break; 785 case CS7: 786 cval = 0x02; 787 break; 788 default: 789 case CS8: 790 cval = 0x03; 791 break; 792 } 793 794 if (cflag & CSTOPB) 795 cval |= 0x04; 796 if (cflag & PARENB) 797 cval |= UART_LCR_PARITY; 798 if (!(cflag & PARODD)) 799 cval |= UART_LCR_EPAR; 800 if (cflag & CMSPAR) 801 cval |= UART_LCR_SPAR; 802 803 /* 804 * Work around a bug in the Oxford Semiconductor 952 rev B 805 * chip which causes it to seriously miscalculate baud rates 806 * when DLL is 0. 807 */ 808 if ((quot & 0xff) == 0 && up->port.type == PORT_16C950 && 809 up->rev == 0x5201) 810 quot ++; 811 812 if (uart_config[up->port.type].flags & UART_USE_FIFO) { 813 if ((up->port.uartclk / quot) < (2400 * 16)) 814 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1; 815#ifdef CONFIG_SERIAL_8250_RSA 816 else if (up->port.type == PORT_RSA) 817 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_14; 818#endif 819 else 820 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_8; 821 } 822 if (up->port.type == PORT_16750) 823 fcr |= UART_FCR7_64BYTE; 824 825 /* 826 * Ok, we're now changing the port state. Do it with 827 * interrupts disabled. 828 */ 829 spin_lock_irqsave(&up->port.lock, flags); 830 831 /* 832 * Update the per-port timeout. 833 */ 834 uart_update_timeout(port, cflag, (port->uartclk / (16 * quot))); 835 836 up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; 837 if (iflag & INPCK) 838 up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE; 839 if (iflag & (IGNBRK | BRKINT | PARMRK)) 840 up->port.read_status_mask |= UART_LSR_BI; 841 842 /* 843 * Characteres to ignore 844 */ 845 up->port.ignore_status_mask = 0; 846 if (iflag & IGNPAR) 847 up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; 848 if (iflag & IGNBRK) { 849 up->port.ignore_status_mask |= UART_LSR_BI; 850 /* 851 * If we're ignoring parity and break indicators, 852 * ignore overruns too (for real raw support). 853 */ 854 if (iflag & IGNPAR) 855 up->port.ignore_status_mask |= UART_LSR_OE; 856 } 857 858 /* 859 * ignore all characters if CREAD is not set 860 */ 861 if ((cflag & CREAD) == 0) 862 up->port.ignore_status_mask |= UART_LSR_DR; 863 864 /* 865 * CTS flow control flag and modem status interrupts 866 */ 867 up->ier &= ~UART_IER_MSI; 868 if (UART_ENABLE_MS(&up->port, cflag)) 869 up->ier |= UART_IER_MSI; 870 871 serial_out(up, UART_IER, up->ier); 872 873 if (uart_config[up->port.type].flags & UART_STARTECH) { 874 serial_outp(up, UART_LCR, 0xBF); 875 serial_outp(up, UART_EFR, cflag & CRTSCTS ? UART_EFR_CTS :0); 876 } 877 serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */ 878 serial_outp(up, UART_DLL, quot & 0xff); /* LS of divisor */ 879 serial_outp(up, UART_DLM, quot >> 8); /* MS of divisor */ 880 if (up->port.type == PORT_16750) 881 serial_outp(up, UART_FCR, fcr); /* set fcr */ 882 serial_outp(up, UART_LCR, cval); /* reset DLAB */ 883 up->lcr = cval; /* Save LCR */ 884 if (up->port.type != PORT_16750) { 885 if (fcr & UART_FCR_ENABLE_FIFO) { 886 /* emulated UARTs (Lucent Venus 167x) need two steps */ 887 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); 888 } 889 serial_outp(up, UART_FCR, fcr); /* set fcr */ 890 } 891 892 up->cflag = cflag; 893 894 spin_unlock_irqrestore(&up->port.lock, flags); 895} 896 897static void 898sunsu_set_termios(struct uart_port *port, struct ktermios *termios, 899 const struct ktermios *old) 900{ 901 unsigned int baud, quot; 902 903 /* 904 * Ask the core to calculate the divisor for us. 905 */ 906 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); 907 quot = uart_get_divisor(port, baud); 908 909 sunsu_change_speed(port, termios->c_cflag, termios->c_iflag, quot); 910} 911 912static void sunsu_release_port(struct uart_port *port) 913{ 914} 915 916static int sunsu_request_port(struct uart_port *port) 917{ 918 return 0; 919} 920 921static void sunsu_config_port(struct uart_port *port, int flags) 922{ 923 struct uart_sunsu_port *up = 924 container_of(port, struct uart_sunsu_port, port); 925 926 if (flags & UART_CONFIG_TYPE) { 927 /* 928 * We are supposed to call autoconfig here, but this requires 929 * splitting all the OBP probing crap from the UART probing. 930 * We'll do it when we kill sunsu.c altogether. 931 */ 932 port->type = up->type_probed; /* XXX */ 933 } 934} 935 936static int 937sunsu_verify_port(struct uart_port *port, struct serial_struct *ser) 938{ 939 return -EINVAL; 940} 941 942static const char * 943sunsu_type(struct uart_port *port) 944{ 945 int type = port->type; 946 947 if (type >= ARRAY_SIZE(uart_config)) 948 type = 0; 949 return uart_config[type].name; 950} 951 952static const struct uart_ops sunsu_pops = { 953 .tx_empty = sunsu_tx_empty, 954 .set_mctrl = sunsu_set_mctrl, 955 .get_mctrl = sunsu_get_mctrl, 956 .stop_tx = sunsu_stop_tx, 957 .start_tx = sunsu_start_tx, 958 .stop_rx = sunsu_stop_rx, 959 .enable_ms = sunsu_enable_ms, 960 .break_ctl = sunsu_break_ctl, 961 .startup = sunsu_startup, 962 .shutdown = sunsu_shutdown, 963 .set_termios = sunsu_set_termios, 964 .type = sunsu_type, 965 .release_port = sunsu_release_port, 966 .request_port = sunsu_request_port, 967 .config_port = sunsu_config_port, 968 .verify_port = sunsu_verify_port, 969}; 970 971#define UART_NR 4 972 973static struct uart_sunsu_port sunsu_ports[UART_NR]; 974static int nr_inst; /* Number of already registered ports */ 975 976#ifdef CONFIG_SERIO 977 978static DEFINE_SPINLOCK(sunsu_serio_lock); 979 980static int sunsu_serio_write(struct serio *serio, unsigned char ch) 981{ 982 struct uart_sunsu_port *up = serio->port_data; 983 unsigned long flags; 984 int lsr; 985 986 spin_lock_irqsave(&sunsu_serio_lock, flags); 987 988 do { 989 lsr = serial_in(up, UART_LSR); 990 } while (!(lsr & UART_LSR_THRE)); 991 992 /* Send the character out. */ 993 serial_out(up, UART_TX, ch); 994 995 spin_unlock_irqrestore(&sunsu_serio_lock, flags); 996 997 return 0; 998} 999 1000static int sunsu_serio_open(struct serio *serio) 1001{ 1002 struct uart_sunsu_port *up = serio->port_data; 1003 unsigned long flags; 1004 int ret; 1005 1006 spin_lock_irqsave(&sunsu_serio_lock, flags); 1007 if (!up->serio_open) { 1008 up->serio_open = 1; 1009 ret = 0; 1010 } else 1011 ret = -EBUSY; 1012 spin_unlock_irqrestore(&sunsu_serio_lock, flags); 1013 1014 return ret; 1015} 1016 1017static void sunsu_serio_close(struct serio *serio) 1018{ 1019 struct uart_sunsu_port *up = serio->port_data; 1020 unsigned long flags; 1021 1022 spin_lock_irqsave(&sunsu_serio_lock, flags); 1023 up->serio_open = 0; 1024 spin_unlock_irqrestore(&sunsu_serio_lock, flags); 1025} 1026 1027#endif /* CONFIG_SERIO */ 1028 1029static void sunsu_autoconfig(struct uart_sunsu_port *up) 1030{ 1031 unsigned char status1, status2, scratch, scratch2, scratch3; 1032 unsigned char save_lcr, save_mcr; 1033 unsigned long flags; 1034 1035 if (up->su_type == SU_PORT_NONE) 1036 return; 1037 1038 up->type_probed = PORT_UNKNOWN; 1039 up->port.iotype = UPIO_MEM; 1040 1041 spin_lock_irqsave(&up->port.lock, flags); 1042 1043 if (!(up->port.flags & UPF_BUGGY_UART)) { 1044 /* 1045 * Do a simple existence test first; if we fail this, there's 1046 * no point trying anything else. 1047 * 1048 * 0x80 is used as a nonsense port to prevent against false 1049 * positives due to ISA bus float. The assumption is that 1050 * 0x80 is a non-existent port; which should be safe since 1051 * include/asm/io.h also makes this assumption. 1052 */ 1053 scratch = serial_inp(up, UART_IER); 1054 serial_outp(up, UART_IER, 0); 1055#ifdef __i386__ 1056 outb(0xff, 0x080); 1057#endif 1058 scratch2 = serial_inp(up, UART_IER); 1059 serial_outp(up, UART_IER, 0x0f); 1060#ifdef __i386__ 1061 outb(0, 0x080); 1062#endif 1063 scratch3 = serial_inp(up, UART_IER); 1064 serial_outp(up, UART_IER, scratch); 1065 if (scratch2 != 0 || scratch3 != 0x0F) 1066 goto out; /* We failed; there's nothing here */ 1067 } 1068 1069 save_mcr = serial_in(up, UART_MCR); 1070 save_lcr = serial_in(up, UART_LCR); 1071 1072 /* 1073 * Check to see if a UART is really there. Certain broken 1074 * internal modems based on the Rockwell chipset fail this 1075 * test, because they apparently don't implement the loopback 1076 * test mode. So this test is skipped on the COM 1 through 1077 * COM 4 ports. This *should* be safe, since no board 1078 * manufacturer would be stupid enough to design a board 1079 * that conflicts with COM 1-4 --- we hope! 1080 */ 1081 if (!(up->port.flags & UPF_SKIP_TEST)) { 1082 serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A); 1083 status1 = serial_inp(up, UART_MSR) & 0xF0; 1084 serial_outp(up, UART_MCR, save_mcr); 1085 if (status1 != 0x90) 1086 goto out; /* We failed loopback test */ 1087 } 1088 serial_outp(up, UART_LCR, 0xBF); /* set up for StarTech test */ 1089 serial_outp(up, UART_EFR, 0); /* EFR is the same as FCR */ 1090 serial_outp(up, UART_LCR, 0); 1091 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); 1092 scratch = serial_in(up, UART_IIR) >> 6; 1093 switch (scratch) { 1094 case 0: 1095 up->port.type = PORT_16450; 1096 break; 1097 case 1: 1098 up->port.type = PORT_UNKNOWN; 1099 break; 1100 case 2: 1101 up->port.type = PORT_16550; 1102 break; 1103 case 3: 1104 up->port.type = PORT_16550A; 1105 break; 1106 } 1107 if (up->port.type == PORT_16550A) { 1108 /* Check for Startech UART's */ 1109 serial_outp(up, UART_LCR, UART_LCR_DLAB); 1110 if (serial_in(up, UART_EFR) == 0) { 1111 up->port.type = PORT_16650; 1112 } else { 1113 serial_outp(up, UART_LCR, 0xBF); 1114 if (serial_in(up, UART_EFR) == 0) 1115 up->port.type = PORT_16650V2; 1116 } 1117 } 1118 if (up->port.type == PORT_16550A) { 1119 /* Check for TI 16750 */ 1120 serial_outp(up, UART_LCR, save_lcr | UART_LCR_DLAB); 1121 serial_outp(up, UART_FCR, 1122 UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); 1123 scratch = serial_in(up, UART_IIR) >> 5; 1124 if (scratch == 7) { 1125 /* 1126 * If this is a 16750, and not a cheap UART 1127 * clone, then it should only go into 64 byte 1128 * mode if the UART_FCR7_64BYTE bit was set 1129 * while UART_LCR_DLAB was latched. 1130 */ 1131 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); 1132 serial_outp(up, UART_LCR, 0); 1133 serial_outp(up, UART_FCR, 1134 UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); 1135 scratch = serial_in(up, UART_IIR) >> 5; 1136 if (scratch == 6) 1137 up->port.type = PORT_16750; 1138 } 1139 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO); 1140 } 1141 serial_outp(up, UART_LCR, save_lcr); 1142 if (up->port.type == PORT_16450) { 1143 scratch = serial_in(up, UART_SCR); 1144 serial_outp(up, UART_SCR, 0xa5); 1145 status1 = serial_in(up, UART_SCR); 1146 serial_outp(up, UART_SCR, 0x5a); 1147 status2 = serial_in(up, UART_SCR); 1148 serial_outp(up, UART_SCR, scratch); 1149 1150 if ((status1 != 0xa5) || (status2 != 0x5a)) 1151 up->port.type = PORT_8250; 1152 } 1153 1154 up->port.fifosize = uart_config[up->port.type].dfl_xmit_fifo_size; 1155 1156 if (up->port.type == PORT_UNKNOWN) 1157 goto out; 1158 up->type_probed = up->port.type; /* XXX */ 1159 1160 /* 1161 * Reset the UART. 1162 */ 1163#ifdef CONFIG_SERIAL_8250_RSA 1164 if (up->port.type == PORT_RSA) 1165 serial_outp(up, UART_RSA_FRR, 0); 1166#endif 1167 serial_outp(up, UART_MCR, save_mcr); 1168 serial_outp(up, UART_FCR, (UART_FCR_ENABLE_FIFO | 1169 UART_FCR_CLEAR_RCVR | 1170 UART_FCR_CLEAR_XMIT)); 1171 serial_outp(up, UART_FCR, 0); 1172 (void)serial_in(up, UART_RX); 1173 serial_outp(up, UART_IER, 0); 1174 1175out: 1176 spin_unlock_irqrestore(&up->port.lock, flags); 1177} 1178 1179static struct uart_driver sunsu_reg = { 1180 .owner = THIS_MODULE, 1181 .driver_name = "sunsu", 1182 .dev_name = "ttyS", 1183 .major = TTY_MAJOR, 1184}; 1185 1186static int sunsu_kbd_ms_init(struct uart_sunsu_port *up) 1187{ 1188 int quot, baud; 1189#ifdef CONFIG_SERIO 1190 struct serio *serio; 1191#endif 1192 1193 if (up->su_type == SU_PORT_KBD) { 1194 up->cflag = B1200 | CS8 | CLOCAL | CREAD; 1195 baud = 1200; 1196 } else { 1197 up->cflag = B4800 | CS8 | CLOCAL | CREAD; 1198 baud = 4800; 1199 } 1200 quot = up->port.uartclk / (16 * baud); 1201 1202 sunsu_autoconfig(up); 1203 if (up->port.type == PORT_UNKNOWN) 1204 return -ENODEV; 1205 1206 printk("%pOF: %s port at %llx, irq %u\n", 1207 up->port.dev->of_node, 1208 (up->su_type == SU_PORT_KBD) ? "Keyboard" : "Mouse", 1209 (unsigned long long) up->port.mapbase, 1210 up->port.irq); 1211 1212#ifdef CONFIG_SERIO 1213 serio = &up->serio; 1214 serio->port_data = up; 1215 1216 serio->id.type = SERIO_RS232; 1217 if (up->su_type == SU_PORT_KBD) { 1218 serio->id.proto = SERIO_SUNKBD; 1219 strscpy(serio->name, "sukbd", sizeof(serio->name)); 1220 } else { 1221 serio->id.proto = SERIO_SUN; 1222 serio->id.extra = 1; 1223 strscpy(serio->name, "sums", sizeof(serio->name)); 1224 } 1225 strscpy(serio->phys, 1226 (!(up->port.line & 1) ? "su/serio0" : "su/serio1"), 1227 sizeof(serio->phys)); 1228 1229 serio->write = sunsu_serio_write; 1230 serio->open = sunsu_serio_open; 1231 serio->close = sunsu_serio_close; 1232 serio->dev.parent = up->port.dev; 1233 1234 serio_register_port(serio); 1235#endif 1236 1237 sunsu_change_speed(&up->port, up->cflag, 0, quot); 1238 1239 sunsu_startup(&up->port); 1240 return 0; 1241} 1242 1243/* 1244 * ------------------------------------------------------------ 1245 * Serial console driver 1246 * ------------------------------------------------------------ 1247 */ 1248 1249#ifdef CONFIG_SERIAL_SUNSU_CONSOLE 1250 1251/* 1252 * Wait for transmitter & holding register to empty 1253 */ 1254static void wait_for_xmitr(struct uart_sunsu_port *up) 1255{ 1256 unsigned int status, tmout = 10000; 1257 1258 /* Wait up to 10ms for the character(s) to be sent. */ 1259 do { 1260 status = serial_in(up, UART_LSR); 1261 1262 if (status & UART_LSR_BI) 1263 up->lsr_break_flag = UART_LSR_BI; 1264 1265 if (--tmout == 0) 1266 break; 1267 udelay(1); 1268 } while (!uart_lsr_tx_empty(status)); 1269 1270 /* Wait up to 1s for flow control if necessary */ 1271 if (up->port.flags & UPF_CONS_FLOW) { 1272 tmout = 1000000; 1273 while (--tmout && 1274 ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0)) 1275 udelay(1); 1276 } 1277} 1278 1279static void sunsu_console_putchar(struct uart_port *port, unsigned char ch) 1280{ 1281 struct uart_sunsu_port *up = 1282 container_of(port, struct uart_sunsu_port, port); 1283 1284 wait_for_xmitr(up); 1285 serial_out(up, UART_TX, ch); 1286} 1287 1288/* 1289 * Print a string to the serial port trying not to disturb 1290 * any possible real use of the port... 1291 */ 1292static void sunsu_console_write(struct console *co, const char *s, 1293 unsigned int count) 1294{ 1295 struct uart_sunsu_port *up = &sunsu_ports[co->index]; 1296 unsigned long flags; 1297 unsigned int ier; 1298 int locked = 1; 1299 1300 if (up->port.sysrq || oops_in_progress) 1301 locked = spin_trylock_irqsave(&up->port.lock, flags); 1302 else 1303 spin_lock_irqsave(&up->port.lock, flags); 1304 1305 /* 1306 * First save the UER then disable the interrupts 1307 */ 1308 ier = serial_in(up, UART_IER); 1309 serial_out(up, UART_IER, 0); 1310 1311 uart_console_write(&up->port, s, count, sunsu_console_putchar); 1312 1313 /* 1314 * Finally, wait for transmitter to become empty 1315 * and restore the IER 1316 */ 1317 wait_for_xmitr(up); 1318 serial_out(up, UART_IER, ier); 1319 1320 if (locked) 1321 spin_unlock_irqrestore(&up->port.lock, flags); 1322} 1323 1324/* 1325 * Setup initial baud/bits/parity. We do two things here: 1326 * - construct a cflag setting for the first su_open() 1327 * - initialize the serial port 1328 * Return non-zero if we didn't find a serial port. 1329 */ 1330static int __init sunsu_console_setup(struct console *co, char *options) 1331{ 1332 static struct ktermios dummy; 1333 struct ktermios termios; 1334 struct uart_port *port; 1335 1336 printk("Console: ttyS%d (SU)\n", 1337 (sunsu_reg.minor - 64) + co->index); 1338 1339 if (co->index > nr_inst) 1340 return -ENODEV; 1341 port = &sunsu_ports[co->index].port; 1342 1343 /* 1344 * Temporary fix. 1345 */ 1346 spin_lock_init(&port->lock); 1347 1348 /* Get firmware console settings. */ 1349 sunserial_console_termios(co, port->dev->of_node); 1350 1351 memset(&termios, 0, sizeof(struct ktermios)); 1352 termios.c_cflag = co->cflag; 1353 port->mctrl |= TIOCM_DTR; 1354 port->ops->set_termios(port, &termios, &dummy); 1355 1356 return 0; 1357} 1358 1359static struct console sunsu_console = { 1360 .name = "ttyS", 1361 .write = sunsu_console_write, 1362 .device = uart_console_device, 1363 .setup = sunsu_console_setup, 1364 .flags = CON_PRINTBUFFER, 1365 .index = -1, 1366 .data = &sunsu_reg, 1367}; 1368 1369/* 1370 * Register console. 1371 */ 1372 1373static inline struct console *SUNSU_CONSOLE(void) 1374{ 1375 return &sunsu_console; 1376} 1377#else 1378#define SUNSU_CONSOLE() (NULL) 1379#define sunsu_serial_console_init() do { } while (0) 1380#endif 1381 1382static enum su_type su_get_type(struct device_node *dp) 1383{ 1384 struct device_node *ap = of_find_node_by_path("/aliases"); 1385 enum su_type rc = SU_PORT_PORT; 1386 1387 if (ap) { 1388 const char *keyb = of_get_property(ap, "keyboard", NULL); 1389 const char *ms = of_get_property(ap, "mouse", NULL); 1390 struct device_node *match; 1391 1392 if (keyb) { 1393 match = of_find_node_by_path(keyb); 1394 1395 /* 1396 * The pointer is used as an identifier not 1397 * as a pointer, we can drop the refcount on 1398 * the of__node immediately after getting it. 1399 */ 1400 of_node_put(match); 1401 1402 if (dp == match) { 1403 rc = SU_PORT_KBD; 1404 goto out; 1405 } 1406 } 1407 if (ms) { 1408 match = of_find_node_by_path(ms); 1409 1410 of_node_put(match); 1411 1412 if (dp == match) { 1413 rc = SU_PORT_MS; 1414 goto out; 1415 } 1416 } 1417 } 1418 1419out: 1420 of_node_put(ap); 1421 return rc; 1422} 1423 1424static int su_probe(struct platform_device *op) 1425{ 1426 struct device_node *dp = op->dev.of_node; 1427 struct uart_sunsu_port *up; 1428 struct resource *rp; 1429 enum su_type type; 1430 bool ignore_line; 1431 int err; 1432 1433 type = su_get_type(dp); 1434 if (type == SU_PORT_PORT) { 1435 if (nr_inst >= UART_NR) 1436 return -EINVAL; 1437 up = &sunsu_ports[nr_inst]; 1438 } else { 1439 up = kzalloc(sizeof(*up), GFP_KERNEL); 1440 if (!up) 1441 return -ENOMEM; 1442 } 1443 1444 up->port.line = nr_inst; 1445 1446 spin_lock_init(&up->port.lock); 1447 1448 up->su_type = type; 1449 1450 rp = &op->resource[0]; 1451 up->port.mapbase = rp->start; 1452 up->reg_size = resource_size(rp); 1453 up->port.membase = of_ioremap(rp, 0, up->reg_size, "su"); 1454 if (!up->port.membase) { 1455 if (type != SU_PORT_PORT) 1456 kfree(up); 1457 return -ENOMEM; 1458 } 1459 1460 up->port.irq = op->archdata.irqs[0]; 1461 1462 up->port.dev = &op->dev; 1463 1464 up->port.type = PORT_UNKNOWN; 1465 up->port.uartclk = (SU_BASE_BAUD * 16); 1466 up->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_SUNSU_CONSOLE); 1467 1468 err = 0; 1469 if (up->su_type == SU_PORT_KBD || up->su_type == SU_PORT_MS) { 1470 err = sunsu_kbd_ms_init(up); 1471 if (err) { 1472 of_iounmap(&op->resource[0], 1473 up->port.membase, up->reg_size); 1474 kfree(up); 1475 return err; 1476 } 1477 platform_set_drvdata(op, up); 1478 1479 nr_inst++; 1480 1481 return 0; 1482 } 1483 1484 up->port.flags |= UPF_BOOT_AUTOCONF; 1485 1486 sunsu_autoconfig(up); 1487 1488 err = -ENODEV; 1489 if (up->port.type == PORT_UNKNOWN) 1490 goto out_unmap; 1491 1492 up->port.ops = &sunsu_pops; 1493 1494 ignore_line = false; 1495 if (of_node_name_eq(dp, "rsc-console") || 1496 of_node_name_eq(dp, "lom-console")) 1497 ignore_line = true; 1498 1499 sunserial_console_match(SUNSU_CONSOLE(), dp, 1500 &sunsu_reg, up->port.line, 1501 ignore_line); 1502 err = uart_add_one_port(&sunsu_reg, &up->port); 1503 if (err) 1504 goto out_unmap; 1505 1506 platform_set_drvdata(op, up); 1507 1508 nr_inst++; 1509 1510 return 0; 1511 1512out_unmap: 1513 of_iounmap(&op->resource[0], up->port.membase, up->reg_size); 1514 kfree(up); 1515 return err; 1516} 1517 1518static int su_remove(struct platform_device *op) 1519{ 1520 struct uart_sunsu_port *up = platform_get_drvdata(op); 1521 bool kbdms = false; 1522 1523 if (up->su_type == SU_PORT_MS || 1524 up->su_type == SU_PORT_KBD) 1525 kbdms = true; 1526 1527 if (kbdms) { 1528#ifdef CONFIG_SERIO 1529 serio_unregister_port(&up->serio); 1530#endif 1531 } else if (up->port.type != PORT_UNKNOWN) 1532 uart_remove_one_port(&sunsu_reg, &up->port); 1533 1534 if (up->port.membase) 1535 of_iounmap(&op->resource[0], up->port.membase, up->reg_size); 1536 1537 if (kbdms) 1538 kfree(up); 1539 1540 return 0; 1541} 1542 1543static const struct of_device_id su_match[] = { 1544 { 1545 .name = "su", 1546 }, 1547 { 1548 .name = "su_pnp", 1549 }, 1550 { 1551 .name = "serial", 1552 .compatible = "su", 1553 }, 1554 { 1555 .type = "serial", 1556 .compatible = "su", 1557 }, 1558 {}, 1559}; 1560MODULE_DEVICE_TABLE(of, su_match); 1561 1562static struct platform_driver su_driver = { 1563 .driver = { 1564 .name = "su", 1565 .of_match_table = su_match, 1566 }, 1567 .probe = su_probe, 1568 .remove = su_remove, 1569}; 1570 1571static int __init sunsu_init(void) 1572{ 1573 struct device_node *dp; 1574 int err; 1575 int num_uart = 0; 1576 1577 for_each_node_by_name(dp, "su") { 1578 if (su_get_type(dp) == SU_PORT_PORT) 1579 num_uart++; 1580 } 1581 for_each_node_by_name(dp, "su_pnp") { 1582 if (su_get_type(dp) == SU_PORT_PORT) 1583 num_uart++; 1584 } 1585 for_each_node_by_name(dp, "serial") { 1586 if (of_device_is_compatible(dp, "su")) { 1587 if (su_get_type(dp) == SU_PORT_PORT) 1588 num_uart++; 1589 } 1590 } 1591 for_each_node_by_type(dp, "serial") { 1592 if (of_device_is_compatible(dp, "su")) { 1593 if (su_get_type(dp) == SU_PORT_PORT) 1594 num_uart++; 1595 } 1596 } 1597 1598 if (num_uart) { 1599 err = sunserial_register_minors(&sunsu_reg, num_uart); 1600 if (err) 1601 return err; 1602 } 1603 1604 err = platform_driver_register(&su_driver); 1605 if (err && num_uart) 1606 sunserial_unregister_minors(&sunsu_reg, num_uart); 1607 1608 return err; 1609} 1610 1611static void __exit sunsu_exit(void) 1612{ 1613 platform_driver_unregister(&su_driver); 1614 if (sunsu_reg.nr) 1615 sunserial_unregister_minors(&sunsu_reg, sunsu_reg.nr); 1616} 1617 1618module_init(sunsu_init); 1619module_exit(sunsu_exit); 1620 1621MODULE_AUTHOR("Eddie C. Dost, Peter Zaitcev, and David S. Miller"); 1622MODULE_DESCRIPTION("Sun SU serial port driver"); 1623MODULE_VERSION("2.0"); 1624MODULE_LICENSE("GPL"); 1625