1// SPDX-License-Identifier: GPL-2.0-only 2/* 3 * SCSI Enclosure Services 4 * 5 * Copyright (C) 2008 James Bottomley <James.Bottomley@HansenPartnership.com> 6 */ 7 8#include <linux/slab.h> 9#include <linux/module.h> 10#include <linux/kernel.h> 11#include <linux/enclosure.h> 12#include <asm/unaligned.h> 13 14#include <scsi/scsi.h> 15#include <scsi/scsi_cmnd.h> 16#include <scsi/scsi_dbg.h> 17#include <scsi/scsi_device.h> 18#include <scsi/scsi_driver.h> 19#include <scsi/scsi_host.h> 20 21#include <scsi/scsi_transport_sas.h> 22 23struct ses_device { 24 unsigned char *page1; 25 unsigned char *page1_types; 26 unsigned char *page2; 27 unsigned char *page10; 28 short page1_len; 29 short page1_num_types; 30 short page2_len; 31 short page10_len; 32}; 33 34struct ses_component { 35 u64 addr; 36}; 37 38static bool ses_page2_supported(struct enclosure_device *edev) 39{ 40 struct ses_device *ses_dev = edev->scratch; 41 42 return (ses_dev->page2 != NULL); 43} 44 45static int ses_probe(struct device *dev) 46{ 47 struct scsi_device *sdev = to_scsi_device(dev); 48 int err = -ENODEV; 49 50 if (sdev->type != TYPE_ENCLOSURE) 51 goto out; 52 53 err = 0; 54 sdev_printk(KERN_NOTICE, sdev, "Attached Enclosure device\n"); 55 56 out: 57 return err; 58} 59 60#define SES_TIMEOUT (30 * HZ) 61#define SES_RETRIES 3 62 63static void init_device_slot_control(unsigned char *dest_desc, 64 struct enclosure_component *ecomp, 65 unsigned char *status) 66{ 67 memcpy(dest_desc, status, 4); 68 dest_desc[0] = 0; 69 /* only clear byte 1 for ENCLOSURE_COMPONENT_DEVICE */ 70 if (ecomp->type == ENCLOSURE_COMPONENT_DEVICE) 71 dest_desc[1] = 0; 72 dest_desc[2] &= 0xde; 73 dest_desc[3] &= 0x3c; 74} 75 76 77static int ses_recv_diag(struct scsi_device *sdev, int page_code, 78 void *buf, int bufflen) 79{ 80 int ret; 81 unsigned char cmd[] = { 82 RECEIVE_DIAGNOSTIC, 83 1, /* Set PCV bit */ 84 page_code, 85 bufflen >> 8, 86 bufflen & 0xff, 87 0 88 }; 89 unsigned char recv_page_code; 90 unsigned int retries = SES_RETRIES; 91 struct scsi_sense_hdr sshdr; 92 const struct scsi_exec_args exec_args = { 93 .sshdr = &sshdr, 94 }; 95 96 do { 97 ret = scsi_execute_cmd(sdev, cmd, REQ_OP_DRV_IN, buf, bufflen, 98 SES_TIMEOUT, 1, &exec_args); 99 } while (ret > 0 && --retries && scsi_sense_valid(&sshdr) && 100 (sshdr.sense_key == NOT_READY || 101 (sshdr.sense_key == UNIT_ATTENTION && sshdr.asc == 0x29))); 102 103 if (unlikely(ret)) 104 return ret; 105 106 recv_page_code = ((unsigned char *)buf)[0]; 107 108 if (likely(recv_page_code == page_code)) 109 return ret; 110 111 /* successful diagnostic but wrong page code. This happens to some 112 * USB devices, just print a message and pretend there was an error */ 113 114 sdev_printk(KERN_ERR, sdev, 115 "Wrong diagnostic page; asked for %d got %u\n", 116 page_code, recv_page_code); 117 118 return -EINVAL; 119} 120 121static int ses_send_diag(struct scsi_device *sdev, int page_code, 122 void *buf, int bufflen) 123{ 124 int result; 125 126 unsigned char cmd[] = { 127 SEND_DIAGNOSTIC, 128 0x10, /* Set PF bit */ 129 0, 130 bufflen >> 8, 131 bufflen & 0xff, 132 0 133 }; 134 struct scsi_sense_hdr sshdr; 135 unsigned int retries = SES_RETRIES; 136 const struct scsi_exec_args exec_args = { 137 .sshdr = &sshdr, 138 }; 139 140 do { 141 result = scsi_execute_cmd(sdev, cmd, REQ_OP_DRV_OUT, buf, 142 bufflen, SES_TIMEOUT, 1, &exec_args); 143 } while (result > 0 && --retries && scsi_sense_valid(&sshdr) && 144 (sshdr.sense_key == NOT_READY || 145 (sshdr.sense_key == UNIT_ATTENTION && sshdr.asc == 0x29))); 146 147 if (result) 148 sdev_printk(KERN_ERR, sdev, "SEND DIAGNOSTIC result: %8x\n", 149 result); 150 return result; 151} 152 153static int ses_set_page2_descriptor(struct enclosure_device *edev, 154 struct enclosure_component *ecomp, 155 unsigned char *desc) 156{ 157 int i, j, count = 0, descriptor = ecomp->number; 158 struct scsi_device *sdev = to_scsi_device(edev->edev.parent); 159 struct ses_device *ses_dev = edev->scratch; 160 unsigned char *type_ptr = ses_dev->page1_types; 161 unsigned char *desc_ptr = ses_dev->page2 + 8; 162 163 /* Clear everything */ 164 memset(desc_ptr, 0, ses_dev->page2_len - 8); 165 for (i = 0; i < ses_dev->page1_num_types; i++, type_ptr += 4) { 166 for (j = 0; j < type_ptr[1]; j++) { 167 desc_ptr += 4; 168 if (type_ptr[0] != ENCLOSURE_COMPONENT_DEVICE && 169 type_ptr[0] != ENCLOSURE_COMPONENT_ARRAY_DEVICE) 170 continue; 171 if (count++ == descriptor) { 172 memcpy(desc_ptr, desc, 4); 173 /* set select */ 174 desc_ptr[0] |= 0x80; 175 /* clear reserved, just in case */ 176 desc_ptr[0] &= 0xf0; 177 } 178 } 179 } 180 181 return ses_send_diag(sdev, 2, ses_dev->page2, ses_dev->page2_len); 182} 183 184static unsigned char *ses_get_page2_descriptor(struct enclosure_device *edev, 185 struct enclosure_component *ecomp) 186{ 187 int i, j, count = 0, descriptor = ecomp->number; 188 struct scsi_device *sdev = to_scsi_device(edev->edev.parent); 189 struct ses_device *ses_dev = edev->scratch; 190 unsigned char *type_ptr = ses_dev->page1_types; 191 unsigned char *desc_ptr = ses_dev->page2 + 8; 192 193 if (ses_recv_diag(sdev, 2, ses_dev->page2, ses_dev->page2_len) < 0) 194 return NULL; 195 196 for (i = 0; i < ses_dev->page1_num_types; i++, type_ptr += 4) { 197 for (j = 0; j < type_ptr[1]; j++) { 198 desc_ptr += 4; 199 if (type_ptr[0] != ENCLOSURE_COMPONENT_DEVICE && 200 type_ptr[0] != ENCLOSURE_COMPONENT_ARRAY_DEVICE) 201 continue; 202 if (count++ == descriptor) 203 return desc_ptr; 204 } 205 } 206 return NULL; 207} 208 209/* For device slot and array device slot elements, byte 3 bit 6 210 * is "fault sensed" while byte 3 bit 5 is "fault reqstd". As this 211 * code stands these bits are shifted 4 positions right so in 212 * sysfs they will appear as bits 2 and 1 respectively. Strange. */ 213static void ses_get_fault(struct enclosure_device *edev, 214 struct enclosure_component *ecomp) 215{ 216 unsigned char *desc; 217 218 if (!ses_page2_supported(edev)) { 219 ecomp->fault = 0; 220 return; 221 } 222 desc = ses_get_page2_descriptor(edev, ecomp); 223 if (desc) 224 ecomp->fault = (desc[3] & 0x60) >> 4; 225} 226 227static int ses_set_fault(struct enclosure_device *edev, 228 struct enclosure_component *ecomp, 229 enum enclosure_component_setting val) 230{ 231 unsigned char desc[4]; 232 unsigned char *desc_ptr; 233 234 if (!ses_page2_supported(edev)) 235 return -EINVAL; 236 237 desc_ptr = ses_get_page2_descriptor(edev, ecomp); 238 239 if (!desc_ptr) 240 return -EIO; 241 242 init_device_slot_control(desc, ecomp, desc_ptr); 243 244 switch (val) { 245 case ENCLOSURE_SETTING_DISABLED: 246 desc[3] &= 0xdf; 247 break; 248 case ENCLOSURE_SETTING_ENABLED: 249 desc[3] |= 0x20; 250 break; 251 default: 252 /* SES doesn't do the SGPIO blink settings */ 253 return -EINVAL; 254 } 255 256 return ses_set_page2_descriptor(edev, ecomp, desc); 257} 258 259static void ses_get_status(struct enclosure_device *edev, 260 struct enclosure_component *ecomp) 261{ 262 unsigned char *desc; 263 264 if (!ses_page2_supported(edev)) { 265 ecomp->status = 0; 266 return; 267 } 268 desc = ses_get_page2_descriptor(edev, ecomp); 269 if (desc) 270 ecomp->status = (desc[0] & 0x0f); 271} 272 273static void ses_get_locate(struct enclosure_device *edev, 274 struct enclosure_component *ecomp) 275{ 276 unsigned char *desc; 277 278 if (!ses_page2_supported(edev)) { 279 ecomp->locate = 0; 280 return; 281 } 282 desc = ses_get_page2_descriptor(edev, ecomp); 283 if (desc) 284 ecomp->locate = (desc[2] & 0x02) ? 1 : 0; 285} 286 287static int ses_set_locate(struct enclosure_device *edev, 288 struct enclosure_component *ecomp, 289 enum enclosure_component_setting val) 290{ 291 unsigned char desc[4]; 292 unsigned char *desc_ptr; 293 294 if (!ses_page2_supported(edev)) 295 return -EINVAL; 296 297 desc_ptr = ses_get_page2_descriptor(edev, ecomp); 298 299 if (!desc_ptr) 300 return -EIO; 301 302 init_device_slot_control(desc, ecomp, desc_ptr); 303 304 switch (val) { 305 case ENCLOSURE_SETTING_DISABLED: 306 desc[2] &= 0xfd; 307 break; 308 case ENCLOSURE_SETTING_ENABLED: 309 desc[2] |= 0x02; 310 break; 311 default: 312 /* SES doesn't do the SGPIO blink settings */ 313 return -EINVAL; 314 } 315 return ses_set_page2_descriptor(edev, ecomp, desc); 316} 317 318static int ses_set_active(struct enclosure_device *edev, 319 struct enclosure_component *ecomp, 320 enum enclosure_component_setting val) 321{ 322 unsigned char desc[4]; 323 unsigned char *desc_ptr; 324 325 if (!ses_page2_supported(edev)) 326 return -EINVAL; 327 328 desc_ptr = ses_get_page2_descriptor(edev, ecomp); 329 330 if (!desc_ptr) 331 return -EIO; 332 333 init_device_slot_control(desc, ecomp, desc_ptr); 334 335 switch (val) { 336 case ENCLOSURE_SETTING_DISABLED: 337 desc[2] &= 0x7f; 338 ecomp->active = 0; 339 break; 340 case ENCLOSURE_SETTING_ENABLED: 341 desc[2] |= 0x80; 342 ecomp->active = 1; 343 break; 344 default: 345 /* SES doesn't do the SGPIO blink settings */ 346 return -EINVAL; 347 } 348 return ses_set_page2_descriptor(edev, ecomp, desc); 349} 350 351static int ses_show_id(struct enclosure_device *edev, char *buf) 352{ 353 struct ses_device *ses_dev = edev->scratch; 354 unsigned long long id = get_unaligned_be64(ses_dev->page1+8+4); 355 356 return sprintf(buf, "%#llx\n", id); 357} 358 359static void ses_get_power_status(struct enclosure_device *edev, 360 struct enclosure_component *ecomp) 361{ 362 unsigned char *desc; 363 364 if (!ses_page2_supported(edev)) { 365 ecomp->power_status = 0; 366 return; 367 } 368 369 desc = ses_get_page2_descriptor(edev, ecomp); 370 if (desc) 371 ecomp->power_status = (desc[3] & 0x10) ? 0 : 1; 372} 373 374static int ses_set_power_status(struct enclosure_device *edev, 375 struct enclosure_component *ecomp, 376 int val) 377{ 378 unsigned char desc[4]; 379 unsigned char *desc_ptr; 380 381 if (!ses_page2_supported(edev)) 382 return -EINVAL; 383 384 desc_ptr = ses_get_page2_descriptor(edev, ecomp); 385 386 if (!desc_ptr) 387 return -EIO; 388 389 init_device_slot_control(desc, ecomp, desc_ptr); 390 391 switch (val) { 392 /* power = 1 is device_off = 0 and vice versa */ 393 case 0: 394 desc[3] |= 0x10; 395 break; 396 case 1: 397 desc[3] &= 0xef; 398 break; 399 default: 400 return -EINVAL; 401 } 402 ecomp->power_status = val; 403 return ses_set_page2_descriptor(edev, ecomp, desc); 404} 405 406static struct enclosure_component_callbacks ses_enclosure_callbacks = { 407 .get_fault = ses_get_fault, 408 .set_fault = ses_set_fault, 409 .get_status = ses_get_status, 410 .get_locate = ses_get_locate, 411 .set_locate = ses_set_locate, 412 .get_power_status = ses_get_power_status, 413 .set_power_status = ses_set_power_status, 414 .set_active = ses_set_active, 415 .show_id = ses_show_id, 416}; 417 418struct ses_host_edev { 419 struct Scsi_Host *shost; 420 struct enclosure_device *edev; 421}; 422 423#if 0 424int ses_match_host(struct enclosure_device *edev, void *data) 425{ 426 struct ses_host_edev *sed = data; 427 struct scsi_device *sdev; 428 429 if (!scsi_is_sdev_device(edev->edev.parent)) 430 return 0; 431 432 sdev = to_scsi_device(edev->edev.parent); 433 434 if (sdev->host != sed->shost) 435 return 0; 436 437 sed->edev = edev; 438 return 1; 439} 440#endif /* 0 */ 441 442static int ses_process_descriptor(struct enclosure_component *ecomp, 443 unsigned char *desc, int max_desc_len) 444{ 445 int eip = desc[0] & 0x10; 446 int invalid = desc[0] & 0x80; 447 enum scsi_protocol proto = desc[0] & 0x0f; 448 u64 addr = 0; 449 int slot = -1; 450 struct ses_component *scomp = ecomp->scratch; 451 unsigned char *d; 452 453 if (invalid) 454 return 0; 455 456 switch (proto) { 457 case SCSI_PROTOCOL_FCP: 458 if (eip) { 459 if (max_desc_len <= 7) 460 return 1; 461 d = desc + 4; 462 slot = d[3]; 463 } 464 break; 465 case SCSI_PROTOCOL_SAS: 466 467 if (eip) { 468 if (max_desc_len <= 27) 469 return 1; 470 d = desc + 4; 471 slot = d[3]; 472 d = desc + 8; 473 } else { 474 if (max_desc_len <= 23) 475 return 1; 476 d = desc + 4; 477 } 478 479 480 /* only take the phy0 addr */ 481 addr = (u64)d[12] << 56 | 482 (u64)d[13] << 48 | 483 (u64)d[14] << 40 | 484 (u64)d[15] << 32 | 485 (u64)d[16] << 24 | 486 (u64)d[17] << 16 | 487 (u64)d[18] << 8 | 488 (u64)d[19]; 489 break; 490 default: 491 /* FIXME: Need to add more protocols than just SAS */ 492 break; 493 } 494 ecomp->slot = slot; 495 scomp->addr = addr; 496 497 return 0; 498} 499 500struct efd { 501 u64 addr; 502 struct device *dev; 503}; 504 505static int ses_enclosure_find_by_addr(struct enclosure_device *edev, 506 void *data) 507{ 508 struct efd *efd = data; 509 int i; 510 struct ses_component *scomp; 511 512 for (i = 0; i < edev->components; i++) { 513 scomp = edev->component[i].scratch; 514 if (scomp->addr != efd->addr) 515 continue; 516 517 if (enclosure_add_device(edev, i, efd->dev) == 0) 518 kobject_uevent(&efd->dev->kobj, KOBJ_CHANGE); 519 return 1; 520 } 521 return 0; 522} 523 524#define INIT_ALLOC_SIZE 32 525 526static void ses_enclosure_data_process(struct enclosure_device *edev, 527 struct scsi_device *sdev, 528 int create) 529{ 530 u32 result; 531 unsigned char *buf = NULL, *type_ptr, *desc_ptr, *addl_desc_ptr = NULL; 532 int i, j, page7_len, len, components; 533 struct ses_device *ses_dev = edev->scratch; 534 int types = ses_dev->page1_num_types; 535 unsigned char *hdr_buf = kzalloc(INIT_ALLOC_SIZE, GFP_KERNEL); 536 537 if (!hdr_buf) 538 goto simple_populate; 539 540 /* re-read page 10 */ 541 if (ses_dev->page10) 542 ses_recv_diag(sdev, 10, ses_dev->page10, ses_dev->page10_len); 543 /* Page 7 for the descriptors is optional */ 544 result = ses_recv_diag(sdev, 7, hdr_buf, INIT_ALLOC_SIZE); 545 if (result) 546 goto simple_populate; 547 548 page7_len = len = (hdr_buf[2] << 8) + hdr_buf[3] + 4; 549 /* add 1 for trailing '\0' we'll use */ 550 buf = kzalloc(len + 1, GFP_KERNEL); 551 if (!buf) 552 goto simple_populate; 553 result = ses_recv_diag(sdev, 7, buf, len); 554 if (result) { 555 simple_populate: 556 kfree(buf); 557 buf = NULL; 558 desc_ptr = NULL; 559 len = 0; 560 page7_len = 0; 561 } else { 562 desc_ptr = buf + 8; 563 len = (desc_ptr[2] << 8) + desc_ptr[3]; 564 /* skip past overall descriptor */ 565 desc_ptr += len + 4; 566 } 567 if (ses_dev->page10 && ses_dev->page10_len > 9) 568 addl_desc_ptr = ses_dev->page10 + 8; 569 type_ptr = ses_dev->page1_types; 570 components = 0; 571 for (i = 0; i < types; i++, type_ptr += 4) { 572 for (j = 0; j < type_ptr[1]; j++) { 573 char *name = NULL; 574 struct enclosure_component *ecomp; 575 int max_desc_len; 576 577 if (desc_ptr) { 578 if (desc_ptr + 3 >= buf + page7_len) { 579 desc_ptr = NULL; 580 } else { 581 len = (desc_ptr[2] << 8) + desc_ptr[3]; 582 desc_ptr += 4; 583 if (desc_ptr + len > buf + page7_len) 584 desc_ptr = NULL; 585 else { 586 /* Add trailing zero - pushes into 587 * reserved space */ 588 desc_ptr[len] = '\0'; 589 name = desc_ptr; 590 } 591 } 592 } 593 if (type_ptr[0] == ENCLOSURE_COMPONENT_DEVICE || 594 type_ptr[0] == ENCLOSURE_COMPONENT_ARRAY_DEVICE) { 595 596 if (create) 597 ecomp = enclosure_component_alloc( 598 edev, 599 components++, 600 type_ptr[0], 601 name); 602 else if (components < edev->components) 603 ecomp = &edev->component[components++]; 604 else 605 ecomp = ERR_PTR(-EINVAL); 606 607 if (!IS_ERR(ecomp)) { 608 if (addl_desc_ptr) { 609 max_desc_len = ses_dev->page10_len - 610 (addl_desc_ptr - ses_dev->page10); 611 if (ses_process_descriptor(ecomp, 612 addl_desc_ptr, 613 max_desc_len)) 614 addl_desc_ptr = NULL; 615 } 616 if (create) 617 enclosure_component_register( 618 ecomp); 619 } 620 } 621 if (desc_ptr) 622 desc_ptr += len; 623 624 if (addl_desc_ptr && 625 /* only find additional descriptions for specific devices */ 626 (type_ptr[0] == ENCLOSURE_COMPONENT_DEVICE || 627 type_ptr[0] == ENCLOSURE_COMPONENT_ARRAY_DEVICE || 628 type_ptr[0] == ENCLOSURE_COMPONENT_SAS_EXPANDER || 629 /* these elements are optional */ 630 type_ptr[0] == ENCLOSURE_COMPONENT_SCSI_TARGET_PORT || 631 type_ptr[0] == ENCLOSURE_COMPONENT_SCSI_INITIATOR_PORT || 632 type_ptr[0] == ENCLOSURE_COMPONENT_CONTROLLER_ELECTRONICS)) { 633 addl_desc_ptr += addl_desc_ptr[1] + 2; 634 if (addl_desc_ptr + 1 >= ses_dev->page10 + ses_dev->page10_len) 635 addl_desc_ptr = NULL; 636 } 637 } 638 } 639 kfree(buf); 640 kfree(hdr_buf); 641} 642 643static void ses_match_to_enclosure(struct enclosure_device *edev, 644 struct scsi_device *sdev, 645 int refresh) 646{ 647 struct scsi_device *edev_sdev = to_scsi_device(edev->edev.parent); 648 struct efd efd = { 649 .addr = 0, 650 }; 651 652 if (refresh) 653 ses_enclosure_data_process(edev, edev_sdev, 0); 654 655 if (scsi_is_sas_rphy(sdev->sdev_target->dev.parent)) 656 efd.addr = sas_get_address(sdev); 657 658 if (efd.addr) { 659 efd.dev = &sdev->sdev_gendev; 660 661 enclosure_for_each_device(ses_enclosure_find_by_addr, &efd); 662 } 663} 664 665static int ses_intf_add(struct device *cdev) 666{ 667 struct scsi_device *sdev = to_scsi_device(cdev->parent); 668 struct scsi_device *tmp_sdev; 669 unsigned char *buf = NULL, *hdr_buf, *type_ptr, page; 670 struct ses_device *ses_dev; 671 u32 result; 672 int i, types, len, components = 0; 673 int err = -ENOMEM; 674 int num_enclosures; 675 struct enclosure_device *edev; 676 struct ses_component *scomp = NULL; 677 678 if (!scsi_device_enclosure(sdev)) { 679 /* not an enclosure, but might be in one */ 680 struct enclosure_device *prev = NULL; 681 682 while ((edev = enclosure_find(&sdev->host->shost_gendev, prev)) != NULL) { 683 ses_match_to_enclosure(edev, sdev, 1); 684 prev = edev; 685 } 686 return -ENODEV; 687 } 688 689 /* TYPE_ENCLOSURE prints a message in probe */ 690 if (sdev->type != TYPE_ENCLOSURE) 691 sdev_printk(KERN_NOTICE, sdev, "Embedded Enclosure Device\n"); 692 693 ses_dev = kzalloc(sizeof(*ses_dev), GFP_KERNEL); 694 hdr_buf = kzalloc(INIT_ALLOC_SIZE, GFP_KERNEL); 695 if (!hdr_buf || !ses_dev) 696 goto err_init_free; 697 698 page = 1; 699 result = ses_recv_diag(sdev, page, hdr_buf, INIT_ALLOC_SIZE); 700 if (result) 701 goto recv_failed; 702 703 len = (hdr_buf[2] << 8) + hdr_buf[3] + 4; 704 buf = kzalloc(len, GFP_KERNEL); 705 if (!buf) 706 goto err_free; 707 708 result = ses_recv_diag(sdev, page, buf, len); 709 if (result) 710 goto recv_failed; 711 712 types = 0; 713 714 /* we always have one main enclosure and the rest are referred 715 * to as secondary subenclosures */ 716 num_enclosures = buf[1] + 1; 717 718 /* begin at the enclosure descriptor */ 719 type_ptr = buf + 8; 720 /* skip all the enclosure descriptors */ 721 for (i = 0; i < num_enclosures && type_ptr < buf + len; i++) { 722 types += type_ptr[2]; 723 type_ptr += type_ptr[3] + 4; 724 } 725 726 ses_dev->page1_types = type_ptr; 727 ses_dev->page1_num_types = types; 728 729 for (i = 0; i < types && type_ptr < buf + len; i++, type_ptr += 4) { 730 if (type_ptr[0] == ENCLOSURE_COMPONENT_DEVICE || 731 type_ptr[0] == ENCLOSURE_COMPONENT_ARRAY_DEVICE) 732 components += type_ptr[1]; 733 } 734 735 ses_dev->page1 = buf; 736 ses_dev->page1_len = len; 737 buf = NULL; 738 739 page = 2; 740 result = ses_recv_diag(sdev, page, hdr_buf, INIT_ALLOC_SIZE); 741 if (result) 742 goto page2_not_supported; 743 744 len = (hdr_buf[2] << 8) + hdr_buf[3] + 4; 745 buf = kzalloc(len, GFP_KERNEL); 746 if (!buf) 747 goto err_free; 748 749 /* make sure getting page 2 actually works */ 750 result = ses_recv_diag(sdev, 2, buf, len); 751 if (result) 752 goto recv_failed; 753 ses_dev->page2 = buf; 754 ses_dev->page2_len = len; 755 buf = NULL; 756 757 /* The additional information page --- allows us 758 * to match up the devices */ 759 page = 10; 760 result = ses_recv_diag(sdev, page, hdr_buf, INIT_ALLOC_SIZE); 761 if (!result) { 762 763 len = (hdr_buf[2] << 8) + hdr_buf[3] + 4; 764 buf = kzalloc(len, GFP_KERNEL); 765 if (!buf) 766 goto err_free; 767 768 result = ses_recv_diag(sdev, page, buf, len); 769 if (result) 770 goto recv_failed; 771 ses_dev->page10 = buf; 772 ses_dev->page10_len = len; 773 buf = NULL; 774 } 775page2_not_supported: 776 if (components > 0) { 777 scomp = kcalloc(components, sizeof(struct ses_component), GFP_KERNEL); 778 if (!scomp) 779 goto err_free; 780 } 781 782 edev = enclosure_register(cdev->parent, dev_name(&sdev->sdev_gendev), 783 components, &ses_enclosure_callbacks); 784 if (IS_ERR(edev)) { 785 err = PTR_ERR(edev); 786 goto err_free; 787 } 788 789 kfree(hdr_buf); 790 791 edev->scratch = ses_dev; 792 for (i = 0; i < components; i++) 793 edev->component[i].scratch = scomp + i; 794 795 ses_enclosure_data_process(edev, sdev, 1); 796 797 /* see if there are any devices matching before 798 * we found the enclosure */ 799 shost_for_each_device(tmp_sdev, sdev->host) { 800 if (tmp_sdev->lun != 0 || scsi_device_enclosure(tmp_sdev)) 801 continue; 802 ses_match_to_enclosure(edev, tmp_sdev, 0); 803 } 804 805 return 0; 806 807 recv_failed: 808 sdev_printk(KERN_ERR, sdev, "Failed to get diagnostic page 0x%x\n", 809 page); 810 err = -ENODEV; 811 err_free: 812 kfree(buf); 813 kfree(scomp); 814 kfree(ses_dev->page10); 815 kfree(ses_dev->page2); 816 kfree(ses_dev->page1); 817 err_init_free: 818 kfree(ses_dev); 819 kfree(hdr_buf); 820 sdev_printk(KERN_ERR, sdev, "Failed to bind enclosure %d\n", err); 821 return err; 822} 823 824static int ses_remove(struct device *dev) 825{ 826 return 0; 827} 828 829static void ses_intf_remove_component(struct scsi_device *sdev) 830{ 831 struct enclosure_device *edev, *prev = NULL; 832 833 while ((edev = enclosure_find(&sdev->host->shost_gendev, prev)) != NULL) { 834 prev = edev; 835 if (!enclosure_remove_device(edev, &sdev->sdev_gendev)) 836 break; 837 } 838 if (edev) 839 put_device(&edev->edev); 840} 841 842static void ses_intf_remove_enclosure(struct scsi_device *sdev) 843{ 844 struct enclosure_device *edev; 845 struct ses_device *ses_dev; 846 847 /* exact match to this enclosure */ 848 edev = enclosure_find(&sdev->sdev_gendev, NULL); 849 if (!edev) 850 return; 851 852 ses_dev = edev->scratch; 853 edev->scratch = NULL; 854 855 kfree(ses_dev->page10); 856 kfree(ses_dev->page1); 857 kfree(ses_dev->page2); 858 kfree(ses_dev); 859 860 if (edev->components) 861 kfree(edev->component[0].scratch); 862 863 put_device(&edev->edev); 864 enclosure_unregister(edev); 865} 866 867static void ses_intf_remove(struct device *cdev) 868{ 869 struct scsi_device *sdev = to_scsi_device(cdev->parent); 870 871 if (!scsi_device_enclosure(sdev)) 872 ses_intf_remove_component(sdev); 873 else 874 ses_intf_remove_enclosure(sdev); 875} 876 877static struct class_interface ses_interface = { 878 .add_dev = ses_intf_add, 879 .remove_dev = ses_intf_remove, 880}; 881 882static struct scsi_driver ses_template = { 883 .gendrv = { 884 .name = "ses", 885 .owner = THIS_MODULE, 886 .probe = ses_probe, 887 .remove = ses_remove, 888 }, 889}; 890 891static int __init ses_init(void) 892{ 893 int err; 894 895 err = scsi_register_interface(&ses_interface); 896 if (err) 897 return err; 898 899 err = scsi_register_driver(&ses_template.gendrv); 900 if (err) 901 goto out_unreg; 902 903 return 0; 904 905 out_unreg: 906 scsi_unregister_interface(&ses_interface); 907 return err; 908} 909 910static void __exit ses_exit(void) 911{ 912 scsi_unregister_driver(&ses_template.gendrv); 913 scsi_unregister_interface(&ses_interface); 914} 915 916module_init(ses_init); 917module_exit(ses_exit); 918 919MODULE_ALIAS_SCSI_DEVICE(TYPE_ENCLOSURE); 920 921MODULE_AUTHOR("James Bottomley"); 922MODULE_DESCRIPTION("SCSI Enclosure Services (ses) driver"); 923MODULE_LICENSE("GPL v2"); 924