1// SPDX-License-Identifier: GPL-2.0+ 2// 3// max8997.c - Regulator driver for the Maxim 8997/8966 4// 5// Copyright (C) 2011 Samsung Electronics 6// MyungJoo Ham <myungjoo.ham@samsung.com> 7// 8// This driver is based on max8998.c 9 10#include <linux/bug.h> 11#include <linux/err.h> 12#include <linux/gpio.h> 13#include <linux/of_gpio.h> 14#include <linux/slab.h> 15#include <linux/module.h> 16#include <linux/platform_device.h> 17#include <linux/regulator/driver.h> 18#include <linux/regulator/machine.h> 19#include <linux/mfd/max8997.h> 20#include <linux/mfd/max8997-private.h> 21#include <linux/regulator/of_regulator.h> 22 23struct max8997_data { 24 struct device *dev; 25 struct max8997_dev *iodev; 26 int num_regulators; 27 int ramp_delay; /* in mV/us */ 28 29 bool buck1_gpiodvs; 30 bool buck2_gpiodvs; 31 bool buck5_gpiodvs; 32 u8 buck1_vol[8]; 33 u8 buck2_vol[8]; 34 u8 buck5_vol[8]; 35 int buck125_gpios[3]; 36 int buck125_gpioindex; 37 bool ignore_gpiodvs_side_effect; 38 39 u8 saved_states[MAX8997_REG_MAX]; 40}; 41 42static const unsigned int safeoutvolt[] = { 43 4850000, 44 4900000, 45 4950000, 46 3300000, 47}; 48 49static inline void max8997_set_gpio(struct max8997_data *max8997) 50{ 51 int set3 = (max8997->buck125_gpioindex) & 0x1; 52 int set2 = ((max8997->buck125_gpioindex) >> 1) & 0x1; 53 int set1 = ((max8997->buck125_gpioindex) >> 2) & 0x1; 54 55 gpio_set_value(max8997->buck125_gpios[0], set1); 56 gpio_set_value(max8997->buck125_gpios[1], set2); 57 gpio_set_value(max8997->buck125_gpios[2], set3); 58} 59 60struct voltage_map_desc { 61 int min; 62 int max; 63 int step; 64}; 65 66/* Voltage maps in uV */ 67static const struct voltage_map_desc ldo_voltage_map_desc = { 68 .min = 800000, .max = 3950000, .step = 50000, 69}; /* LDO1 ~ 18, 21 all */ 70 71static const struct voltage_map_desc buck1245_voltage_map_desc = { 72 .min = 650000, .max = 2225000, .step = 25000, 73}; /* Buck1, 2, 4, 5 */ 74 75static const struct voltage_map_desc buck37_voltage_map_desc = { 76 .min = 750000, .max = 3900000, .step = 50000, 77}; /* Buck3, 7 */ 78 79/* current map in uA */ 80static const struct voltage_map_desc charger_current_map_desc = { 81 .min = 200000, .max = 950000, .step = 50000, 82}; 83 84static const struct voltage_map_desc topoff_current_map_desc = { 85 .min = 50000, .max = 200000, .step = 10000, 86}; 87 88static const struct voltage_map_desc *reg_voltage_map[] = { 89 [MAX8997_LDO1] = &ldo_voltage_map_desc, 90 [MAX8997_LDO2] = &ldo_voltage_map_desc, 91 [MAX8997_LDO3] = &ldo_voltage_map_desc, 92 [MAX8997_LDO4] = &ldo_voltage_map_desc, 93 [MAX8997_LDO5] = &ldo_voltage_map_desc, 94 [MAX8997_LDO6] = &ldo_voltage_map_desc, 95 [MAX8997_LDO7] = &ldo_voltage_map_desc, 96 [MAX8997_LDO8] = &ldo_voltage_map_desc, 97 [MAX8997_LDO9] = &ldo_voltage_map_desc, 98 [MAX8997_LDO10] = &ldo_voltage_map_desc, 99 [MAX8997_LDO11] = &ldo_voltage_map_desc, 100 [MAX8997_LDO12] = &ldo_voltage_map_desc, 101 [MAX8997_LDO13] = &ldo_voltage_map_desc, 102 [MAX8997_LDO14] = &ldo_voltage_map_desc, 103 [MAX8997_LDO15] = &ldo_voltage_map_desc, 104 [MAX8997_LDO16] = &ldo_voltage_map_desc, 105 [MAX8997_LDO17] = &ldo_voltage_map_desc, 106 [MAX8997_LDO18] = &ldo_voltage_map_desc, 107 [MAX8997_LDO21] = &ldo_voltage_map_desc, 108 [MAX8997_BUCK1] = &buck1245_voltage_map_desc, 109 [MAX8997_BUCK2] = &buck1245_voltage_map_desc, 110 [MAX8997_BUCK3] = &buck37_voltage_map_desc, 111 [MAX8997_BUCK4] = &buck1245_voltage_map_desc, 112 [MAX8997_BUCK5] = &buck1245_voltage_map_desc, 113 [MAX8997_BUCK6] = NULL, 114 [MAX8997_BUCK7] = &buck37_voltage_map_desc, 115 [MAX8997_EN32KHZ_AP] = NULL, 116 [MAX8997_EN32KHZ_CP] = NULL, 117 [MAX8997_ENVICHG] = NULL, 118 [MAX8997_ESAFEOUT1] = NULL, 119 [MAX8997_ESAFEOUT2] = NULL, 120 [MAX8997_CHARGER_CV] = NULL, 121 [MAX8997_CHARGER] = &charger_current_map_desc, 122 [MAX8997_CHARGER_TOPOFF] = &topoff_current_map_desc, 123}; 124 125static int max8997_list_voltage_charger_cv(struct regulator_dev *rdev, 126 unsigned int selector) 127{ 128 int rid = rdev_get_id(rdev); 129 130 if (rid != MAX8997_CHARGER_CV) 131 goto err; 132 133 switch (selector) { 134 case 0x00: 135 return 4200000; 136 case 0x01 ... 0x0E: 137 return 4000000 + 20000 * (selector - 0x01); 138 case 0x0F: 139 return 4350000; 140 default: 141 return -EINVAL; 142 } 143err: 144 return -EINVAL; 145} 146 147static int max8997_list_voltage(struct regulator_dev *rdev, 148 unsigned int selector) 149{ 150 const struct voltage_map_desc *desc; 151 int rid = rdev_get_id(rdev); 152 int val; 153 154 if (rid < 0 || rid >= ARRAY_SIZE(reg_voltage_map)) 155 return -EINVAL; 156 157 desc = reg_voltage_map[rid]; 158 if (desc == NULL) 159 return -EINVAL; 160 161 val = desc->min + desc->step * selector; 162 if (val > desc->max) 163 return -EINVAL; 164 165 return val; 166} 167 168static int max8997_get_enable_register(struct regulator_dev *rdev, 169 int *reg, int *mask, int *pattern) 170{ 171 int rid = rdev_get_id(rdev); 172 173 switch (rid) { 174 case MAX8997_LDO1 ... MAX8997_LDO21: 175 *reg = MAX8997_REG_LDO1CTRL + (rid - MAX8997_LDO1); 176 *mask = 0xC0; 177 *pattern = 0xC0; 178 break; 179 case MAX8997_BUCK1: 180 *reg = MAX8997_REG_BUCK1CTRL; 181 *mask = 0x01; 182 *pattern = 0x01; 183 break; 184 case MAX8997_BUCK2: 185 *reg = MAX8997_REG_BUCK2CTRL; 186 *mask = 0x01; 187 *pattern = 0x01; 188 break; 189 case MAX8997_BUCK3: 190 *reg = MAX8997_REG_BUCK3CTRL; 191 *mask = 0x01; 192 *pattern = 0x01; 193 break; 194 case MAX8997_BUCK4: 195 *reg = MAX8997_REG_BUCK4CTRL; 196 *mask = 0x01; 197 *pattern = 0x01; 198 break; 199 case MAX8997_BUCK5: 200 *reg = MAX8997_REG_BUCK5CTRL; 201 *mask = 0x01; 202 *pattern = 0x01; 203 break; 204 case MAX8997_BUCK6: 205 *reg = MAX8997_REG_BUCK6CTRL; 206 *mask = 0x01; 207 *pattern = 0x01; 208 break; 209 case MAX8997_BUCK7: 210 *reg = MAX8997_REG_BUCK7CTRL; 211 *mask = 0x01; 212 *pattern = 0x01; 213 break; 214 case MAX8997_EN32KHZ_AP ... MAX8997_EN32KHZ_CP: 215 *reg = MAX8997_REG_MAINCON1; 216 *mask = 0x01 << (rid - MAX8997_EN32KHZ_AP); 217 *pattern = 0x01 << (rid - MAX8997_EN32KHZ_AP); 218 break; 219 case MAX8997_ENVICHG: 220 *reg = MAX8997_REG_MBCCTRL1; 221 *mask = 0x80; 222 *pattern = 0x80; 223 break; 224 case MAX8997_ESAFEOUT1 ... MAX8997_ESAFEOUT2: 225 *reg = MAX8997_REG_SAFEOUTCTRL; 226 *mask = 0x40 << (rid - MAX8997_ESAFEOUT1); 227 *pattern = 0x40 << (rid - MAX8997_ESAFEOUT1); 228 break; 229 case MAX8997_CHARGER: 230 *reg = MAX8997_REG_MBCCTRL2; 231 *mask = 0x40; 232 *pattern = 0x40; 233 break; 234 default: 235 /* Not controllable or not exists */ 236 return -EINVAL; 237 } 238 239 return 0; 240} 241 242static int max8997_reg_is_enabled(struct regulator_dev *rdev) 243{ 244 struct max8997_data *max8997 = rdev_get_drvdata(rdev); 245 struct i2c_client *i2c = max8997->iodev->i2c; 246 int ret, reg, mask, pattern; 247 u8 val; 248 249 ret = max8997_get_enable_register(rdev, ®, &mask, &pattern); 250 if (ret) 251 return ret; 252 253 ret = max8997_read_reg(i2c, reg, &val); 254 if (ret) 255 return ret; 256 257 return (val & mask) == pattern; 258} 259 260static int max8997_reg_enable(struct regulator_dev *rdev) 261{ 262 struct max8997_data *max8997 = rdev_get_drvdata(rdev); 263 struct i2c_client *i2c = max8997->iodev->i2c; 264 int ret, reg, mask, pattern; 265 266 ret = max8997_get_enable_register(rdev, ®, &mask, &pattern); 267 if (ret) 268 return ret; 269 270 return max8997_update_reg(i2c, reg, pattern, mask); 271} 272 273static int max8997_reg_disable(struct regulator_dev *rdev) 274{ 275 struct max8997_data *max8997 = rdev_get_drvdata(rdev); 276 struct i2c_client *i2c = max8997->iodev->i2c; 277 int ret, reg, mask, pattern; 278 279 ret = max8997_get_enable_register(rdev, ®, &mask, &pattern); 280 if (ret) 281 return ret; 282 283 return max8997_update_reg(i2c, reg, ~pattern, mask); 284} 285 286static int max8997_get_voltage_register(struct regulator_dev *rdev, 287 int *_reg, int *_shift, int *_mask) 288{ 289 struct max8997_data *max8997 = rdev_get_drvdata(rdev); 290 int rid = rdev_get_id(rdev); 291 int reg, shift = 0, mask = 0x3f; 292 293 switch (rid) { 294 case MAX8997_LDO1 ... MAX8997_LDO21: 295 reg = MAX8997_REG_LDO1CTRL + (rid - MAX8997_LDO1); 296 break; 297 case MAX8997_BUCK1: 298 reg = MAX8997_REG_BUCK1DVS1; 299 if (max8997->buck1_gpiodvs) 300 reg += max8997->buck125_gpioindex; 301 break; 302 case MAX8997_BUCK2: 303 reg = MAX8997_REG_BUCK2DVS1; 304 if (max8997->buck2_gpiodvs) 305 reg += max8997->buck125_gpioindex; 306 break; 307 case MAX8997_BUCK3: 308 reg = MAX8997_REG_BUCK3DVS; 309 break; 310 case MAX8997_BUCK4: 311 reg = MAX8997_REG_BUCK4DVS; 312 break; 313 case MAX8997_BUCK5: 314 reg = MAX8997_REG_BUCK5DVS1; 315 if (max8997->buck5_gpiodvs) 316 reg += max8997->buck125_gpioindex; 317 break; 318 case MAX8997_BUCK7: 319 reg = MAX8997_REG_BUCK7DVS; 320 break; 321 case MAX8997_ESAFEOUT1 ... MAX8997_ESAFEOUT2: 322 reg = MAX8997_REG_SAFEOUTCTRL; 323 shift = (rid == MAX8997_ESAFEOUT2) ? 2 : 0; 324 mask = 0x3; 325 break; 326 case MAX8997_CHARGER_CV: 327 reg = MAX8997_REG_MBCCTRL3; 328 shift = 0; 329 mask = 0xf; 330 break; 331 case MAX8997_CHARGER: 332 reg = MAX8997_REG_MBCCTRL4; 333 shift = 0; 334 mask = 0xf; 335 break; 336 case MAX8997_CHARGER_TOPOFF: 337 reg = MAX8997_REG_MBCCTRL5; 338 shift = 0; 339 mask = 0xf; 340 break; 341 default: 342 return -EINVAL; 343 } 344 345 *_reg = reg; 346 *_shift = shift; 347 *_mask = mask; 348 349 return 0; 350} 351 352static int max8997_get_voltage_sel(struct regulator_dev *rdev) 353{ 354 struct max8997_data *max8997 = rdev_get_drvdata(rdev); 355 struct i2c_client *i2c = max8997->iodev->i2c; 356 int reg, shift, mask, ret; 357 u8 val; 358 359 ret = max8997_get_voltage_register(rdev, ®, &shift, &mask); 360 if (ret) 361 return ret; 362 363 ret = max8997_read_reg(i2c, reg, &val); 364 if (ret) 365 return ret; 366 367 val >>= shift; 368 val &= mask; 369 370 return val; 371} 372 373static inline int max8997_get_voltage_proper_val( 374 const struct voltage_map_desc *desc, 375 int min_vol, int max_vol) 376{ 377 int i; 378 379 if (desc == NULL) 380 return -EINVAL; 381 382 if (max_vol < desc->min || min_vol > desc->max) 383 return -EINVAL; 384 385 if (min_vol < desc->min) 386 min_vol = desc->min; 387 388 i = DIV_ROUND_UP(min_vol - desc->min, desc->step); 389 390 if (desc->min + desc->step * i > max_vol) 391 return -EINVAL; 392 393 return i; 394} 395 396static int max8997_set_voltage_charger_cv(struct regulator_dev *rdev, 397 int min_uV, int max_uV, unsigned *selector) 398{ 399 struct max8997_data *max8997 = rdev_get_drvdata(rdev); 400 struct i2c_client *i2c = max8997->iodev->i2c; 401 int rid = rdev_get_id(rdev); 402 int lb, ub; 403 int reg, shift = 0, mask, ret = 0; 404 u8 val = 0x0; 405 406 if (rid != MAX8997_CHARGER_CV) 407 return -EINVAL; 408 409 ret = max8997_get_voltage_register(rdev, ®, &shift, &mask); 410 if (ret) 411 return ret; 412 413 if (max_uV < 4000000 || min_uV > 4350000) 414 return -EINVAL; 415 416 if (min_uV <= 4000000) 417 val = 0x1; 418 else if (min_uV <= 4200000 && max_uV >= 4200000) 419 val = 0x0; 420 else { 421 lb = (min_uV - 4000001) / 20000 + 2; 422 ub = (max_uV - 4000000) / 20000 + 1; 423 424 if (lb > ub) 425 return -EINVAL; 426 427 if (lb < 0xf) 428 val = lb; 429 else { 430 if (ub >= 0xf) 431 val = 0xf; 432 else 433 return -EINVAL; 434 } 435 } 436 437 *selector = val; 438 439 ret = max8997_update_reg(i2c, reg, val << shift, mask); 440 441 return ret; 442} 443 444/* 445 * For LDO1 ~ LDO21, BUCK1~5, BUCK7, CHARGER, CHARGER_TOPOFF 446 * BUCK1, 2, and 5 are available if they are not controlled by gpio 447 */ 448static int max8997_set_voltage_ldobuck(struct regulator_dev *rdev, 449 int min_uV, int max_uV, unsigned *selector) 450{ 451 struct max8997_data *max8997 = rdev_get_drvdata(rdev); 452 struct i2c_client *i2c = max8997->iodev->i2c; 453 const struct voltage_map_desc *desc; 454 int rid = rdev_get_id(rdev); 455 int i, reg, shift, mask, ret; 456 457 switch (rid) { 458 case MAX8997_LDO1 ... MAX8997_LDO21: 459 break; 460 case MAX8997_BUCK1 ... MAX8997_BUCK5: 461 break; 462 case MAX8997_BUCK6: 463 return -EINVAL; 464 case MAX8997_BUCK7: 465 break; 466 case MAX8997_CHARGER: 467 break; 468 case MAX8997_CHARGER_TOPOFF: 469 break; 470 default: 471 return -EINVAL; 472 } 473 474 desc = reg_voltage_map[rid]; 475 476 i = max8997_get_voltage_proper_val(desc, min_uV, max_uV); 477 if (i < 0) 478 return i; 479 480 ret = max8997_get_voltage_register(rdev, ®, &shift, &mask); 481 if (ret) 482 return ret; 483 484 ret = max8997_update_reg(i2c, reg, i << shift, mask << shift); 485 *selector = i; 486 487 return ret; 488} 489 490static int max8997_set_voltage_buck_time_sel(struct regulator_dev *rdev, 491 unsigned int old_selector, 492 unsigned int new_selector) 493{ 494 struct max8997_data *max8997 = rdev_get_drvdata(rdev); 495 int rid = rdev_get_id(rdev); 496 const struct voltage_map_desc *desc = reg_voltage_map[rid]; 497 498 /* Delay is required only if the voltage is increasing */ 499 if (old_selector >= new_selector) 500 return 0; 501 502 /* No need to delay if gpio_dvs_mode */ 503 switch (rid) { 504 case MAX8997_BUCK1: 505 if (max8997->buck1_gpiodvs) 506 return 0; 507 break; 508 case MAX8997_BUCK2: 509 if (max8997->buck2_gpiodvs) 510 return 0; 511 break; 512 case MAX8997_BUCK5: 513 if (max8997->buck5_gpiodvs) 514 return 0; 515 break; 516 } 517 518 switch (rid) { 519 case MAX8997_BUCK1: 520 case MAX8997_BUCK2: 521 case MAX8997_BUCK4: 522 case MAX8997_BUCK5: 523 return DIV_ROUND_UP(desc->step * (new_selector - old_selector), 524 max8997->ramp_delay * 1000); 525 } 526 527 return 0; 528} 529 530/* 531 * Assess the damage on the voltage setting of BUCK1,2,5 by the change. 532 * 533 * When GPIO-DVS mode is used for multiple bucks, changing the voltage value 534 * of one of the bucks may affect that of another buck, which is the side 535 * effect of the change (set_voltage). This function examines the GPIO-DVS 536 * configurations and checks whether such side-effect exists. 537 */ 538static int max8997_assess_side_effect(struct regulator_dev *rdev, 539 u8 new_val, int *best) 540{ 541 struct max8997_data *max8997 = rdev_get_drvdata(rdev); 542 int rid = rdev_get_id(rdev); 543 u8 *buckx_val[3]; 544 bool buckx_gpiodvs[3]; 545 int side_effect[8]; 546 int min_side_effect = INT_MAX; 547 int i; 548 549 *best = -1; 550 551 switch (rid) { 552 case MAX8997_BUCK1: 553 rid = 0; 554 break; 555 case MAX8997_BUCK2: 556 rid = 1; 557 break; 558 case MAX8997_BUCK5: 559 rid = 2; 560 break; 561 default: 562 return -EINVAL; 563 } 564 565 buckx_val[0] = max8997->buck1_vol; 566 buckx_val[1] = max8997->buck2_vol; 567 buckx_val[2] = max8997->buck5_vol; 568 buckx_gpiodvs[0] = max8997->buck1_gpiodvs; 569 buckx_gpiodvs[1] = max8997->buck2_gpiodvs; 570 buckx_gpiodvs[2] = max8997->buck5_gpiodvs; 571 572 for (i = 0; i < 8; i++) { 573 int others; 574 575 if (new_val != (buckx_val[rid])[i]) { 576 side_effect[i] = -1; 577 continue; 578 } 579 580 side_effect[i] = 0; 581 for (others = 0; others < 3; others++) { 582 int diff; 583 584 if (others == rid) 585 continue; 586 if (buckx_gpiodvs[others] == false) 587 continue; /* Not affected */ 588 diff = (buckx_val[others])[i] - 589 (buckx_val[others])[max8997->buck125_gpioindex]; 590 if (diff > 0) 591 side_effect[i] += diff; 592 else if (diff < 0) 593 side_effect[i] -= diff; 594 } 595 if (side_effect[i] == 0) { 596 *best = i; 597 return 0; /* NO SIDE EFFECT! Use This! */ 598 } 599 if (side_effect[i] < min_side_effect) { 600 min_side_effect = side_effect[i]; 601 *best = i; 602 } 603 } 604 605 if (*best == -1) 606 return -EINVAL; 607 608 return side_effect[*best]; 609} 610 611/* 612 * For Buck 1 ~ 5 and 7. If it is not controlled by GPIO, this calls 613 * max8997_set_voltage_ldobuck to do the job. 614 */ 615static int max8997_set_voltage_buck(struct regulator_dev *rdev, 616 int min_uV, int max_uV, unsigned *selector) 617{ 618 struct max8997_data *max8997 = rdev_get_drvdata(rdev); 619 int rid = rdev_get_id(rdev); 620 const struct voltage_map_desc *desc; 621 int new_val, new_idx, damage, tmp_val, tmp_idx, tmp_dmg; 622 bool gpio_dvs_mode = false; 623 624 if (rid < MAX8997_BUCK1 || rid > MAX8997_BUCK7) 625 return -EINVAL; 626 627 switch (rid) { 628 case MAX8997_BUCK1: 629 if (max8997->buck1_gpiodvs) 630 gpio_dvs_mode = true; 631 break; 632 case MAX8997_BUCK2: 633 if (max8997->buck2_gpiodvs) 634 gpio_dvs_mode = true; 635 break; 636 case MAX8997_BUCK5: 637 if (max8997->buck5_gpiodvs) 638 gpio_dvs_mode = true; 639 break; 640 } 641 642 if (!gpio_dvs_mode) 643 return max8997_set_voltage_ldobuck(rdev, min_uV, max_uV, 644 selector); 645 646 desc = reg_voltage_map[rid]; 647 new_val = max8997_get_voltage_proper_val(desc, min_uV, max_uV); 648 if (new_val < 0) 649 return new_val; 650 651 tmp_dmg = INT_MAX; 652 tmp_idx = -1; 653 tmp_val = -1; 654 do { 655 damage = max8997_assess_side_effect(rdev, new_val, &new_idx); 656 if (damage == 0) 657 goto out; 658 659 if (tmp_dmg > damage) { 660 tmp_idx = new_idx; 661 tmp_val = new_val; 662 tmp_dmg = damage; 663 } 664 665 new_val++; 666 } while (desc->min + desc->step * new_val <= desc->max); 667 668 new_idx = tmp_idx; 669 new_val = tmp_val; 670 671 if (max8997->ignore_gpiodvs_side_effect == false) 672 return -EINVAL; 673 674 dev_warn(&rdev->dev, 675 "MAX8997 GPIO-DVS Side Effect Warning: GPIO SET: %d -> %d\n", 676 max8997->buck125_gpioindex, tmp_idx); 677 678out: 679 if (new_idx < 0 || new_val < 0) 680 return -EINVAL; 681 682 max8997->buck125_gpioindex = new_idx; 683 max8997_set_gpio(max8997); 684 *selector = new_val; 685 686 return 0; 687} 688 689/* For SAFEOUT1 and SAFEOUT2 */ 690static int max8997_set_voltage_safeout_sel(struct regulator_dev *rdev, 691 unsigned selector) 692{ 693 struct max8997_data *max8997 = rdev_get_drvdata(rdev); 694 struct i2c_client *i2c = max8997->iodev->i2c; 695 int rid = rdev_get_id(rdev); 696 int reg, shift = 0, mask, ret; 697 698 if (rid != MAX8997_ESAFEOUT1 && rid != MAX8997_ESAFEOUT2) 699 return -EINVAL; 700 701 ret = max8997_get_voltage_register(rdev, ®, &shift, &mask); 702 if (ret) 703 return ret; 704 705 return max8997_update_reg(i2c, reg, selector << shift, mask << shift); 706} 707 708static int max8997_reg_disable_suspend(struct regulator_dev *rdev) 709{ 710 struct max8997_data *max8997 = rdev_get_drvdata(rdev); 711 struct i2c_client *i2c = max8997->iodev->i2c; 712 int ret, reg, mask, pattern; 713 int rid = rdev_get_id(rdev); 714 715 ret = max8997_get_enable_register(rdev, ®, &mask, &pattern); 716 if (ret) 717 return ret; 718 719 max8997_read_reg(i2c, reg, &max8997->saved_states[rid]); 720 721 if (rid == MAX8997_LDO1 || 722 rid == MAX8997_LDO10 || 723 rid == MAX8997_LDO21) { 724 dev_dbg(&rdev->dev, "Conditional Power-Off for %s\n", 725 rdev->desc->name); 726 return max8997_update_reg(i2c, reg, 0x40, mask); 727 } 728 729 dev_dbg(&rdev->dev, "Full Power-Off for %s (%xh -> %xh)\n", 730 rdev->desc->name, max8997->saved_states[rid] & mask, 731 (~pattern) & mask); 732 return max8997_update_reg(i2c, reg, ~pattern, mask); 733} 734 735static const struct regulator_ops max8997_ldo_ops = { 736 .list_voltage = max8997_list_voltage, 737 .is_enabled = max8997_reg_is_enabled, 738 .enable = max8997_reg_enable, 739 .disable = max8997_reg_disable, 740 .get_voltage_sel = max8997_get_voltage_sel, 741 .set_voltage = max8997_set_voltage_ldobuck, 742 .set_suspend_disable = max8997_reg_disable_suspend, 743}; 744 745static const struct regulator_ops max8997_buck_ops = { 746 .list_voltage = max8997_list_voltage, 747 .is_enabled = max8997_reg_is_enabled, 748 .enable = max8997_reg_enable, 749 .disable = max8997_reg_disable, 750 .get_voltage_sel = max8997_get_voltage_sel, 751 .set_voltage = max8997_set_voltage_buck, 752 .set_voltage_time_sel = max8997_set_voltage_buck_time_sel, 753 .set_suspend_disable = max8997_reg_disable_suspend, 754}; 755 756static const struct regulator_ops max8997_fixedvolt_ops = { 757 .list_voltage = max8997_list_voltage, 758 .is_enabled = max8997_reg_is_enabled, 759 .enable = max8997_reg_enable, 760 .disable = max8997_reg_disable, 761 .set_suspend_disable = max8997_reg_disable_suspend, 762}; 763 764static const struct regulator_ops max8997_safeout_ops = { 765 .list_voltage = regulator_list_voltage_table, 766 .is_enabled = max8997_reg_is_enabled, 767 .enable = max8997_reg_enable, 768 .disable = max8997_reg_disable, 769 .get_voltage_sel = max8997_get_voltage_sel, 770 .set_voltage_sel = max8997_set_voltage_safeout_sel, 771 .set_suspend_disable = max8997_reg_disable_suspend, 772}; 773 774static const struct regulator_ops max8997_fixedstate_ops = { 775 .list_voltage = max8997_list_voltage_charger_cv, 776 .get_voltage_sel = max8997_get_voltage_sel, 777 .set_voltage = max8997_set_voltage_charger_cv, 778}; 779 780static int max8997_set_current_limit(struct regulator_dev *rdev, 781 int min_uA, int max_uA) 782{ 783 unsigned dummy; 784 int rid = rdev_get_id(rdev); 785 786 if (rid != MAX8997_CHARGER && rid != MAX8997_CHARGER_TOPOFF) 787 return -EINVAL; 788 789 /* Reuse max8997_set_voltage_ldobuck to set current_limit. */ 790 return max8997_set_voltage_ldobuck(rdev, min_uA, max_uA, &dummy); 791} 792 793static int max8997_get_current_limit(struct regulator_dev *rdev) 794{ 795 int sel, rid = rdev_get_id(rdev); 796 797 if (rid != MAX8997_CHARGER && rid != MAX8997_CHARGER_TOPOFF) 798 return -EINVAL; 799 800 sel = max8997_get_voltage_sel(rdev); 801 if (sel < 0) 802 return sel; 803 804 /* Reuse max8997_list_voltage to get current_limit. */ 805 return max8997_list_voltage(rdev, sel); 806} 807 808static const struct regulator_ops max8997_charger_ops = { 809 .is_enabled = max8997_reg_is_enabled, 810 .enable = max8997_reg_enable, 811 .disable = max8997_reg_disable, 812 .get_current_limit = max8997_get_current_limit, 813 .set_current_limit = max8997_set_current_limit, 814}; 815 816static const struct regulator_ops max8997_charger_fixedstate_ops = { 817 .get_current_limit = max8997_get_current_limit, 818 .set_current_limit = max8997_set_current_limit, 819}; 820 821#define MAX8997_VOLTAGE_REGULATOR(_name, _ops) {\ 822 .name = #_name, \ 823 .id = MAX8997_##_name, \ 824 .ops = &_ops, \ 825 .type = REGULATOR_VOLTAGE, \ 826 .owner = THIS_MODULE, \ 827} 828 829#define MAX8997_CURRENT_REGULATOR(_name, _ops) {\ 830 .name = #_name, \ 831 .id = MAX8997_##_name, \ 832 .ops = &_ops, \ 833 .type = REGULATOR_CURRENT, \ 834 .owner = THIS_MODULE, \ 835} 836 837static struct regulator_desc regulators[] = { 838 MAX8997_VOLTAGE_REGULATOR(LDO1, max8997_ldo_ops), 839 MAX8997_VOLTAGE_REGULATOR(LDO2, max8997_ldo_ops), 840 MAX8997_VOLTAGE_REGULATOR(LDO3, max8997_ldo_ops), 841 MAX8997_VOLTAGE_REGULATOR(LDO4, max8997_ldo_ops), 842 MAX8997_VOLTAGE_REGULATOR(LDO5, max8997_ldo_ops), 843 MAX8997_VOLTAGE_REGULATOR(LDO6, max8997_ldo_ops), 844 MAX8997_VOLTAGE_REGULATOR(LDO7, max8997_ldo_ops), 845 MAX8997_VOLTAGE_REGULATOR(LDO8, max8997_ldo_ops), 846 MAX8997_VOLTAGE_REGULATOR(LDO9, max8997_ldo_ops), 847 MAX8997_VOLTAGE_REGULATOR(LDO10, max8997_ldo_ops), 848 MAX8997_VOLTAGE_REGULATOR(LDO11, max8997_ldo_ops), 849 MAX8997_VOLTAGE_REGULATOR(LDO12, max8997_ldo_ops), 850 MAX8997_VOLTAGE_REGULATOR(LDO13, max8997_ldo_ops), 851 MAX8997_VOLTAGE_REGULATOR(LDO14, max8997_ldo_ops), 852 MAX8997_VOLTAGE_REGULATOR(LDO15, max8997_ldo_ops), 853 MAX8997_VOLTAGE_REGULATOR(LDO16, max8997_ldo_ops), 854 MAX8997_VOLTAGE_REGULATOR(LDO17, max8997_ldo_ops), 855 MAX8997_VOLTAGE_REGULATOR(LDO18, max8997_ldo_ops), 856 MAX8997_VOLTAGE_REGULATOR(LDO21, max8997_ldo_ops), 857 MAX8997_VOLTAGE_REGULATOR(BUCK1, max8997_buck_ops), 858 MAX8997_VOLTAGE_REGULATOR(BUCK2, max8997_buck_ops), 859 MAX8997_VOLTAGE_REGULATOR(BUCK3, max8997_buck_ops), 860 MAX8997_VOLTAGE_REGULATOR(BUCK4, max8997_buck_ops), 861 MAX8997_VOLTAGE_REGULATOR(BUCK5, max8997_buck_ops), 862 MAX8997_VOLTAGE_REGULATOR(BUCK6, max8997_fixedvolt_ops), 863 MAX8997_VOLTAGE_REGULATOR(BUCK7, max8997_buck_ops), 864 MAX8997_VOLTAGE_REGULATOR(EN32KHZ_AP, max8997_fixedvolt_ops), 865 MAX8997_VOLTAGE_REGULATOR(EN32KHZ_CP, max8997_fixedvolt_ops), 866 MAX8997_VOLTAGE_REGULATOR(ENVICHG, max8997_fixedvolt_ops), 867 MAX8997_VOLTAGE_REGULATOR(ESAFEOUT1, max8997_safeout_ops), 868 MAX8997_VOLTAGE_REGULATOR(ESAFEOUT2, max8997_safeout_ops), 869 MAX8997_VOLTAGE_REGULATOR(CHARGER_CV, max8997_fixedstate_ops), 870 MAX8997_CURRENT_REGULATOR(CHARGER, max8997_charger_ops), 871 MAX8997_CURRENT_REGULATOR(CHARGER_TOPOFF, 872 max8997_charger_fixedstate_ops), 873}; 874 875#ifdef CONFIG_OF 876static int max8997_pmic_dt_parse_dvs_gpio(struct platform_device *pdev, 877 struct max8997_platform_data *pdata, 878 struct device_node *pmic_np) 879{ 880 int i, gpio; 881 882 for (i = 0; i < 3; i++) { 883 gpio = of_get_named_gpio(pmic_np, 884 "max8997,pmic-buck125-dvs-gpios", i); 885 if (!gpio_is_valid(gpio)) { 886 dev_err(&pdev->dev, "invalid gpio[%d]: %d\n", i, gpio); 887 return -EINVAL; 888 } 889 pdata->buck125_gpios[i] = gpio; 890 } 891 return 0; 892} 893 894static int max8997_pmic_dt_parse_pdata(struct platform_device *pdev, 895 struct max8997_platform_data *pdata) 896{ 897 struct max8997_dev *iodev = dev_get_drvdata(pdev->dev.parent); 898 struct device_node *pmic_np, *regulators_np, *reg_np; 899 struct max8997_regulator_data *rdata; 900 unsigned int i, dvs_voltage_nr = 1, ret; 901 902 pmic_np = iodev->dev->of_node; 903 if (!pmic_np) { 904 dev_err(&pdev->dev, "could not find pmic sub-node\n"); 905 return -ENODEV; 906 } 907 908 regulators_np = of_get_child_by_name(pmic_np, "regulators"); 909 if (!regulators_np) { 910 dev_err(&pdev->dev, "could not find regulators sub-node\n"); 911 return -EINVAL; 912 } 913 914 /* count the number of regulators to be supported in pmic */ 915 pdata->num_regulators = of_get_child_count(regulators_np); 916 917 rdata = devm_kcalloc(&pdev->dev, 918 pdata->num_regulators, sizeof(*rdata), 919 GFP_KERNEL); 920 if (!rdata) { 921 of_node_put(regulators_np); 922 return -ENOMEM; 923 } 924 925 pdata->regulators = rdata; 926 for_each_child_of_node(regulators_np, reg_np) { 927 for (i = 0; i < ARRAY_SIZE(regulators); i++) 928 if (of_node_name_eq(reg_np, regulators[i].name)) 929 break; 930 931 if (i == ARRAY_SIZE(regulators)) { 932 dev_warn(&pdev->dev, "don't know how to configure regulator %pOFn\n", 933 reg_np); 934 continue; 935 } 936 937 rdata->id = i; 938 rdata->initdata = of_get_regulator_init_data(&pdev->dev, 939 reg_np, 940 ®ulators[i]); 941 rdata->reg_node = reg_np; 942 rdata++; 943 } 944 of_node_put(regulators_np); 945 946 pdata->buck1_gpiodvs = of_property_read_bool(pmic_np, "max8997,pmic-buck1-uses-gpio-dvs"); 947 pdata->buck2_gpiodvs = of_property_read_bool(pmic_np, "max8997,pmic-buck2-uses-gpio-dvs"); 948 pdata->buck5_gpiodvs = of_property_read_bool(pmic_np, "max8997,pmic-buck5-uses-gpio-dvs"); 949 950 if (pdata->buck1_gpiodvs || pdata->buck2_gpiodvs || 951 pdata->buck5_gpiodvs) { 952 ret = max8997_pmic_dt_parse_dvs_gpio(pdev, pdata, pmic_np); 953 if (ret) 954 return -EINVAL; 955 956 if (of_property_read_u32(pmic_np, 957 "max8997,pmic-buck125-default-dvs-idx", 958 &pdata->buck125_default_idx)) { 959 pdata->buck125_default_idx = 0; 960 } else { 961 if (pdata->buck125_default_idx >= 8) { 962 pdata->buck125_default_idx = 0; 963 dev_info(&pdev->dev, "invalid value for default dvs index, using 0 instead\n"); 964 } 965 } 966 967 if (of_get_property(pmic_np, 968 "max8997,pmic-ignore-gpiodvs-side-effect", NULL)) 969 pdata->ignore_gpiodvs_side_effect = true; 970 971 dvs_voltage_nr = 8; 972 } 973 974 if (of_property_read_u32_array(pmic_np, 975 "max8997,pmic-buck1-dvs-voltage", 976 pdata->buck1_voltage, dvs_voltage_nr)) { 977 dev_err(&pdev->dev, "buck1 voltages not specified\n"); 978 return -EINVAL; 979 } 980 981 if (of_property_read_u32_array(pmic_np, 982 "max8997,pmic-buck2-dvs-voltage", 983 pdata->buck2_voltage, dvs_voltage_nr)) { 984 dev_err(&pdev->dev, "buck2 voltages not specified\n"); 985 return -EINVAL; 986 } 987 988 if (of_property_read_u32_array(pmic_np, 989 "max8997,pmic-buck5-dvs-voltage", 990 pdata->buck5_voltage, dvs_voltage_nr)) { 991 dev_err(&pdev->dev, "buck5 voltages not specified\n"); 992 return -EINVAL; 993 } 994 995 return 0; 996} 997#else 998static int max8997_pmic_dt_parse_pdata(struct platform_device *pdev, 999 struct max8997_platform_data *pdata) 1000{ 1001 return 0; 1002} 1003#endif /* CONFIG_OF */ 1004 1005static int max8997_pmic_probe(struct platform_device *pdev) 1006{ 1007 struct max8997_dev *iodev = dev_get_drvdata(pdev->dev.parent); 1008 struct max8997_platform_data *pdata = iodev->pdata; 1009 struct regulator_config config = { }; 1010 struct regulator_dev *rdev; 1011 struct max8997_data *max8997; 1012 struct i2c_client *i2c; 1013 int i, ret, nr_dvs; 1014 u8 max_buck1 = 0, max_buck2 = 0, max_buck5 = 0; 1015 1016 if (!pdata) { 1017 dev_err(&pdev->dev, "No platform init data supplied.\n"); 1018 return -ENODEV; 1019 } 1020 1021 if (iodev->dev->of_node) { 1022 ret = max8997_pmic_dt_parse_pdata(pdev, pdata); 1023 if (ret) 1024 return ret; 1025 } 1026 1027 max8997 = devm_kzalloc(&pdev->dev, sizeof(struct max8997_data), 1028 GFP_KERNEL); 1029 if (!max8997) 1030 return -ENOMEM; 1031 1032 max8997->dev = &pdev->dev; 1033 max8997->iodev = iodev; 1034 max8997->num_regulators = pdata->num_regulators; 1035 platform_set_drvdata(pdev, max8997); 1036 i2c = max8997->iodev->i2c; 1037 1038 max8997->buck125_gpioindex = pdata->buck125_default_idx; 1039 max8997->buck1_gpiodvs = pdata->buck1_gpiodvs; 1040 max8997->buck2_gpiodvs = pdata->buck2_gpiodvs; 1041 max8997->buck5_gpiodvs = pdata->buck5_gpiodvs; 1042 memcpy(max8997->buck125_gpios, pdata->buck125_gpios, sizeof(int) * 3); 1043 max8997->ignore_gpiodvs_side_effect = pdata->ignore_gpiodvs_side_effect; 1044 1045 nr_dvs = (pdata->buck1_gpiodvs || pdata->buck2_gpiodvs || 1046 pdata->buck5_gpiodvs) ? 8 : 1; 1047 1048 for (i = 0; i < nr_dvs; i++) { 1049 max8997->buck1_vol[i] = ret = 1050 max8997_get_voltage_proper_val( 1051 &buck1245_voltage_map_desc, 1052 pdata->buck1_voltage[i], 1053 pdata->buck1_voltage[i] + 1054 buck1245_voltage_map_desc.step); 1055 if (ret < 0) 1056 return ret; 1057 1058 max8997->buck2_vol[i] = ret = 1059 max8997_get_voltage_proper_val( 1060 &buck1245_voltage_map_desc, 1061 pdata->buck2_voltage[i], 1062 pdata->buck2_voltage[i] + 1063 buck1245_voltage_map_desc.step); 1064 if (ret < 0) 1065 return ret; 1066 1067 max8997->buck5_vol[i] = ret = 1068 max8997_get_voltage_proper_val( 1069 &buck1245_voltage_map_desc, 1070 pdata->buck5_voltage[i], 1071 pdata->buck5_voltage[i] + 1072 buck1245_voltage_map_desc.step); 1073 if (ret < 0) 1074 return ret; 1075 1076 if (max_buck1 < max8997->buck1_vol[i]) 1077 max_buck1 = max8997->buck1_vol[i]; 1078 if (max_buck2 < max8997->buck2_vol[i]) 1079 max_buck2 = max8997->buck2_vol[i]; 1080 if (max_buck5 < max8997->buck5_vol[i]) 1081 max_buck5 = max8997->buck5_vol[i]; 1082 } 1083 1084 /* For the safety, set max voltage before setting up */ 1085 for (i = 0; i < 8; i++) { 1086 max8997_update_reg(i2c, MAX8997_REG_BUCK1DVS1 + i, 1087 max_buck1, 0x3f); 1088 max8997_update_reg(i2c, MAX8997_REG_BUCK2DVS1 + i, 1089 max_buck2, 0x3f); 1090 max8997_update_reg(i2c, MAX8997_REG_BUCK5DVS1 + i, 1091 max_buck5, 0x3f); 1092 } 1093 1094 /* Initialize all the DVS related BUCK registers */ 1095 for (i = 0; i < nr_dvs; i++) { 1096 max8997_update_reg(i2c, MAX8997_REG_BUCK1DVS1 + i, 1097 max8997->buck1_vol[i], 1098 0x3f); 1099 max8997_update_reg(i2c, MAX8997_REG_BUCK2DVS1 + i, 1100 max8997->buck2_vol[i], 1101 0x3f); 1102 max8997_update_reg(i2c, MAX8997_REG_BUCK5DVS1 + i, 1103 max8997->buck5_vol[i], 1104 0x3f); 1105 } 1106 1107 /* 1108 * If buck 1, 2, and 5 do not care DVS GPIO settings, ignore them. 1109 * If at least one of them cares, set gpios. 1110 */ 1111 if (pdata->buck1_gpiodvs || pdata->buck2_gpiodvs || 1112 pdata->buck5_gpiodvs) { 1113 1114 if (!gpio_is_valid(pdata->buck125_gpios[0]) || 1115 !gpio_is_valid(pdata->buck125_gpios[1]) || 1116 !gpio_is_valid(pdata->buck125_gpios[2])) { 1117 dev_err(&pdev->dev, "GPIO NOT VALID\n"); 1118 return -EINVAL; 1119 } 1120 1121 ret = devm_gpio_request(&pdev->dev, pdata->buck125_gpios[0], 1122 "MAX8997 SET1"); 1123 if (ret) 1124 return ret; 1125 1126 ret = devm_gpio_request(&pdev->dev, pdata->buck125_gpios[1], 1127 "MAX8997 SET2"); 1128 if (ret) 1129 return ret; 1130 1131 ret = devm_gpio_request(&pdev->dev, pdata->buck125_gpios[2], 1132 "MAX8997 SET3"); 1133 if (ret) 1134 return ret; 1135 1136 gpio_direction_output(pdata->buck125_gpios[0], 1137 (max8997->buck125_gpioindex >> 2) 1138 & 0x1); /* SET1 */ 1139 gpio_direction_output(pdata->buck125_gpios[1], 1140 (max8997->buck125_gpioindex >> 1) 1141 & 0x1); /* SET2 */ 1142 gpio_direction_output(pdata->buck125_gpios[2], 1143 (max8997->buck125_gpioindex >> 0) 1144 & 0x1); /* SET3 */ 1145 } 1146 1147 /* DVS-GPIO disabled */ 1148 max8997_update_reg(i2c, MAX8997_REG_BUCK1CTRL, (pdata->buck1_gpiodvs) ? 1149 (1 << 1) : (0 << 1), 1 << 1); 1150 max8997_update_reg(i2c, MAX8997_REG_BUCK2CTRL, (pdata->buck2_gpiodvs) ? 1151 (1 << 1) : (0 << 1), 1 << 1); 1152 max8997_update_reg(i2c, MAX8997_REG_BUCK5CTRL, (pdata->buck5_gpiodvs) ? 1153 (1 << 1) : (0 << 1), 1 << 1); 1154 1155 /* Misc Settings */ 1156 max8997->ramp_delay = 10; /* set 10mV/us, which is the default */ 1157 max8997_write_reg(i2c, MAX8997_REG_BUCKRAMP, (0xf << 4) | 0x9); 1158 1159 for (i = 0; i < pdata->num_regulators; i++) { 1160 const struct voltage_map_desc *desc; 1161 int id = pdata->regulators[i].id; 1162 1163 desc = reg_voltage_map[id]; 1164 if (desc) { 1165 regulators[id].n_voltages = 1166 (desc->max - desc->min) / desc->step + 1; 1167 } else if (id == MAX8997_ESAFEOUT1 || id == MAX8997_ESAFEOUT2) { 1168 regulators[id].volt_table = safeoutvolt; 1169 regulators[id].n_voltages = ARRAY_SIZE(safeoutvolt); 1170 } else if (id == MAX8997_CHARGER_CV) { 1171 regulators[id].n_voltages = 16; 1172 } 1173 1174 config.dev = max8997->dev; 1175 config.init_data = pdata->regulators[i].initdata; 1176 config.driver_data = max8997; 1177 config.of_node = pdata->regulators[i].reg_node; 1178 1179 rdev = devm_regulator_register(&pdev->dev, ®ulators[id], 1180 &config); 1181 if (IS_ERR(rdev)) { 1182 dev_err(max8997->dev, "regulator init failed for %d\n", 1183 id); 1184 return PTR_ERR(rdev); 1185 } 1186 } 1187 1188 return 0; 1189} 1190 1191static const struct platform_device_id max8997_pmic_id[] = { 1192 { "max8997-pmic", 0}, 1193 { }, 1194}; 1195MODULE_DEVICE_TABLE(platform, max8997_pmic_id); 1196 1197static struct platform_driver max8997_pmic_driver = { 1198 .driver = { 1199 .name = "max8997-pmic", 1200 .probe_type = PROBE_PREFER_ASYNCHRONOUS, 1201 }, 1202 .probe = max8997_pmic_probe, 1203 .id_table = max8997_pmic_id, 1204}; 1205 1206static int __init max8997_pmic_init(void) 1207{ 1208 return platform_driver_register(&max8997_pmic_driver); 1209} 1210subsys_initcall(max8997_pmic_init); 1211 1212static void __exit max8997_pmic_cleanup(void) 1213{ 1214 platform_driver_unregister(&max8997_pmic_driver); 1215} 1216module_exit(max8997_pmic_cleanup); 1217 1218MODULE_DESCRIPTION("MAXIM 8997/8966 Regulator Driver"); 1219MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>"); 1220MODULE_LICENSE("GPL"); 1221