1/* SPDX-License-Identifier: GPL-2.0-only */ 2/* 3 * This file is part of wl18xx 4 * 5 * Copyright (C) 2011 Texas Instruments Inc. 6 */ 7 8#ifndef __WL18XX_CONF_H__ 9#define __WL18XX_CONF_H__ 10 11#define WL18XX_CONF_MAGIC 0x10e100ca 12#define WL18XX_CONF_VERSION (WLCORE_CONF_VERSION | 0x0007) 13#define WL18XX_CONF_MASK 0x0000ffff 14#define WL18XX_CONF_SIZE (WLCORE_CONF_SIZE + \ 15 sizeof(struct wl18xx_priv_conf)) 16 17#define NUM_OF_CHANNELS_11_ABG 150 18#define NUM_OF_CHANNELS_11_P 7 19#define SRF_TABLE_LEN 16 20#define PIN_MUXING_SIZE 2 21#define WL18XX_TRACE_LOSS_GAPS_TX 10 22#define WL18XX_TRACE_LOSS_GAPS_RX 18 23 24struct wl18xx_mac_and_phy_params { 25 u8 phy_standalone; 26 u8 spare0; 27 u8 enable_clpc; 28 u8 enable_tx_low_pwr_on_siso_rdl; 29 u8 auto_detect; 30 u8 dedicated_fem; 31 32 u8 low_band_component; 33 34 /* Bit 0: One Hot, Bit 1: Control Enable, Bit 2: 1.8V, Bit 3: 3V */ 35 u8 low_band_component_type; 36 37 u8 high_band_component; 38 39 /* Bit 0: One Hot, Bit 1: Control Enable, Bit 2: 1.8V, Bit 3: 3V */ 40 u8 high_band_component_type; 41 u8 number_of_assembled_ant2_4; 42 u8 number_of_assembled_ant5; 43 u8 pin_muxing_platform_options[PIN_MUXING_SIZE]; 44 u8 external_pa_dc2dc; 45 u8 tcxo_ldo_voltage; 46 u8 xtal_itrim_val; 47 u8 srf_state; 48 u8 srf1[SRF_TABLE_LEN]; 49 u8 srf2[SRF_TABLE_LEN]; 50 u8 srf3[SRF_TABLE_LEN]; 51 u8 io_configuration; 52 u8 sdio_configuration; 53 u8 settings; 54 u8 rx_profile; 55 u8 per_chan_pwr_limit_arr_11abg[NUM_OF_CHANNELS_11_ABG]; 56 u8 pwr_limit_reference_11_abg; 57 u8 per_chan_pwr_limit_arr_11p[NUM_OF_CHANNELS_11_P]; 58 u8 pwr_limit_reference_11p; 59 u8 spare1; 60 u8 per_chan_bo_mode_11_abg[13]; 61 u8 per_chan_bo_mode_11_p[4]; 62 u8 primary_clock_setting_time; 63 u8 clock_valid_on_wake_up; 64 u8 secondary_clock_setting_time; 65 u8 board_type; 66 /* enable point saturation */ 67 u8 psat; 68 /* low/medium/high Tx power in dBm for STA-HP BG */ 69 s8 low_power_val; 70 s8 med_power_val; 71 s8 high_power_val; 72 s8 per_sub_band_tx_trace_loss[WL18XX_TRACE_LOSS_GAPS_TX]; 73 s8 per_sub_band_rx_trace_loss[WL18XX_TRACE_LOSS_GAPS_RX]; 74 u8 tx_rf_margin; 75 /* low/medium/high Tx power in dBm for other role */ 76 s8 low_power_val_2nd; 77 s8 med_power_val_2nd; 78 s8 high_power_val_2nd; 79 80 u8 padding[1]; 81} __packed; 82 83enum wl18xx_ht_mode { 84 /* Default - use MIMO, fallback to SISO20 */ 85 HT_MODE_DEFAULT = 0, 86 87 /* Wide - use SISO40 */ 88 HT_MODE_WIDE = 1, 89 90 /* Use SISO20 */ 91 HT_MODE_SISO20 = 2, 92}; 93 94struct wl18xx_ht_settings { 95 /* DEFAULT / WIDE / SISO20 */ 96 u8 mode; 97} __packed; 98 99struct conf_ap_sleep_settings { 100 /* Duty Cycle (20-80% of staying Awake) for IDLE AP 101 * (0: disable) 102 */ 103 u8 idle_duty_cycle; 104 /* Duty Cycle (20-80% of staying Awake) for Connected AP 105 * (0: disable) 106 */ 107 u8 connected_duty_cycle; 108 /* Maximum stations that are allowed to be connected to AP 109 * (255: no limit) 110 */ 111 u8 max_stations_thresh; 112 /* Timeout till enabling the Sleep Mechanism after data stops 113 * [unit: 100 msec] 114 */ 115 u8 idle_conn_thresh; 116} __packed; 117 118struct wl18xx_priv_conf { 119 /* Module params structures */ 120 struct wl18xx_ht_settings ht; 121 122 /* this structure is copied wholesale to FW */ 123 struct wl18xx_mac_and_phy_params phy; 124 125 struct conf_ap_sleep_settings ap_sleep; 126} __packed; 127 128enum wl18xx_sg_params { 129 WL18XX_CONF_SG_PARAM_0 = 0, 130 131 /* Configuration Parameters */ 132 WL18XX_CONF_SG_ANTENNA_CONFIGURATION, 133 WL18XX_CONF_SG_ZIGBEE_COEX, 134 WL18XX_CONF_SG_TIME_SYNC, 135 136 WL18XX_CONF_SG_PARAM_4, 137 WL18XX_CONF_SG_PARAM_5, 138 WL18XX_CONF_SG_PARAM_6, 139 WL18XX_CONF_SG_PARAM_7, 140 WL18XX_CONF_SG_PARAM_8, 141 WL18XX_CONF_SG_PARAM_9, 142 WL18XX_CONF_SG_PARAM_10, 143 WL18XX_CONF_SG_PARAM_11, 144 WL18XX_CONF_SG_PARAM_12, 145 WL18XX_CONF_SG_PARAM_13, 146 WL18XX_CONF_SG_PARAM_14, 147 WL18XX_CONF_SG_PARAM_15, 148 WL18XX_CONF_SG_PARAM_16, 149 WL18XX_CONF_SG_PARAM_17, 150 WL18XX_CONF_SG_PARAM_18, 151 WL18XX_CONF_SG_PARAM_19, 152 WL18XX_CONF_SG_PARAM_20, 153 WL18XX_CONF_SG_PARAM_21, 154 WL18XX_CONF_SG_PARAM_22, 155 WL18XX_CONF_SG_PARAM_23, 156 WL18XX_CONF_SG_PARAM_24, 157 WL18XX_CONF_SG_PARAM_25, 158 159 /* Active Scan Parameters */ 160 WL18XX_CONF_SG_AUTO_SCAN_PROBE_REQ, 161 WL18XX_CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3, 162 163 WL18XX_CONF_SG_PARAM_28, 164 165 /* Passive Scan Parameters */ 166 WL18XX_CONF_SG_PARAM_29, 167 WL18XX_CONF_SG_PARAM_30, 168 WL18XX_CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3, 169 170 /* Passive Scan in Dual Antenna Parameters */ 171 WL18XX_CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN, 172 WL18XX_CONF_SG_BEACON_HV3_COLL_TH_IN_PASSIVE_SCAN, 173 WL18XX_CONF_SG_TX_RX_PROTECT_BW_IN_PASSIVE_SCAN, 174 175 /* General Parameters */ 176 WL18XX_CONF_SG_STA_FORCE_PS_IN_BT_SCO, 177 WL18XX_CONF_SG_PARAM_36, 178 WL18XX_CONF_SG_BEACON_MISS_PERCENT, 179 WL18XX_CONF_SG_PARAM_38, 180 WL18XX_CONF_SG_RXT, 181 WL18XX_CONF_SG_UNUSED, 182 WL18XX_CONF_SG_ADAPTIVE_RXT_TXT, 183 WL18XX_CONF_SG_GENERAL_USAGE_BIT_MAP, 184 WL18XX_CONF_SG_HV3_MAX_SERVED, 185 WL18XX_CONF_SG_PARAM_44, 186 WL18XX_CONF_SG_PARAM_45, 187 WL18XX_CONF_SG_CONSECUTIVE_CTS_THRESHOLD, 188 WL18XX_CONF_SG_GEMINI_PARAM_47, 189 WL18XX_CONF_SG_STA_CONNECTION_PROTECTION_TIME, 190 191 /* AP Parameters */ 192 WL18XX_CONF_SG_AP_BEACON_MISS_TX, 193 WL18XX_CONF_SG_PARAM_50, 194 WL18XX_CONF_SG_AP_BEACON_WINDOW_INTERVAL, 195 WL18XX_CONF_SG_AP_CONNECTION_PROTECTION_TIME, 196 WL18XX_CONF_SG_PARAM_53, 197 WL18XX_CONF_SG_PARAM_54, 198 199 /* CTS Diluting Parameters */ 200 WL18XX_CONF_SG_CTS_DILUTED_BAD_RX_PACKETS_TH, 201 WL18XX_CONF_SG_CTS_CHOP_IN_DUAL_ANT_SCO_MASTER, 202 203 WL18XX_CONF_SG_TEMP_PARAM_1, 204 WL18XX_CONF_SG_TEMP_PARAM_2, 205 WL18XX_CONF_SG_TEMP_PARAM_3, 206 WL18XX_CONF_SG_TEMP_PARAM_4, 207 WL18XX_CONF_SG_TEMP_PARAM_5, 208 WL18XX_CONF_SG_TEMP_PARAM_6, 209 WL18XX_CONF_SG_TEMP_PARAM_7, 210 WL18XX_CONF_SG_TEMP_PARAM_8, 211 WL18XX_CONF_SG_TEMP_PARAM_9, 212 WL18XX_CONF_SG_TEMP_PARAM_10, 213 214 WL18XX_CONF_SG_PARAMS_MAX, 215 WL18XX_CONF_SG_PARAMS_ALL = 0xff 216}; 217 218#endif /* __WL18XX_CONF_H__ */ 219