1#define RCS_ID "$Id: scc.c,v 1.75 1998/11/04 15:15:01 jreuter Exp jreuter $" 2 3#define VERSION "3.0" 4 5/* 6 * Please use z8530drv-utils-3.0 with this version. 7 * ------------------ 8 * 9 * You can find a subset of the documentation in 10 * Documentation/networking/device_drivers/hamradio/z8530drv.rst. 11 */ 12 13/* 14 ******************************************************************** 15 * SCC.C - Linux driver for Z8530 based HDLC cards for AX.25 * 16 ******************************************************************** 17 18 19 ******************************************************************** 20 21 Copyright (c) 1993, 2000 Joerg Reuter DL1BKE 22 23 portions (c) 1993 Guido ten Dolle PE1NNZ 24 25 ******************************************************************** 26 27 The driver and the programs in the archive are UNDER CONSTRUCTION. 28 The code is likely to fail, and so your kernel could --- even 29 a whole network. 30 31 This driver is intended for Amateur Radio use. If you are running it 32 for commercial purposes, please drop me a note. I am nosy... 33 34 ...BUT: 35 36 ! You m u s t recognize the appropriate legislations of your country ! 37 ! before you connect a radio to the SCC board and start to transmit or ! 38 ! receive. The GPL allows you to use the d r i v e r, NOT the RADIO! ! 39 40 For non-Amateur-Radio use please note that you might need a special 41 allowance/licence from the designer of the SCC Board and/or the 42 MODEM. 43 44 This program is free software; you can redistribute it and/or modify 45 it under the terms of the (modified) GNU General Public License 46 delivered with the Linux kernel source. 47 48 This program is distributed in the hope that it will be useful, 49 but WITHOUT ANY WARRANTY; without even the implied warranty of 50 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 51 GNU General Public License for more details. 52 53 You should find a copy of the GNU General Public License in 54 /usr/src/linux/COPYING; 55 56 ******************************************************************** 57 58 59 Incomplete history of z8530drv: 60 ------------------------------- 61 62 1994-09-13 started to write the driver, rescued most of my own 63 code (and Hans Alblas' memory buffer pool concept) from 64 an earlier project "sccdrv" which was initiated by 65 Guido ten Dolle. Not much of the old driver survived, 66 though. The first version I put my hands on was sccdrv1.3 67 from August 1993. The memory buffer pool concept 68 appeared in an unauthorized sccdrv version (1.5) from 69 August 1994. 70 71 1995-01-31 changed copyright notice to GPL without limitations. 72 73 . 74 . <SNIP> 75 . 76 77 1996-10-05 New semester, new driver... 78 79 * KISS TNC emulator removed (TTY driver) 80 * Source moved to drivers/net/ 81 * Includes Z8530 defines from drivers/net/z8530.h 82 * Uses sk_buffer memory management 83 * Reduced overhead of /proc/net/z8530drv output 84 * Streamlined quite a lot things 85 * Invents brand new bugs... ;-) 86 87 The move to version number 3.0 reflects theses changes. 88 You can use 'kissbridge' if you need a KISS TNC emulator. 89 90 1996-12-13 Fixed for Linux networking changes. (G4KLX) 91 1997-01-08 Fixed the remaining problems. 92 1997-04-02 Hopefully fixed the problems with the new *_timer() 93 routines, added calibration code. 94 1997-10-12 Made SCC_DELAY a CONFIG option, added CONFIG_SCC_TRXECHO 95 1998-01-29 Small fix to avoid lock-up on initialization 96 1998-09-29 Fixed the "grouping" bugs, tx_inhibit works again, 97 using dev->tx_queue_len now instead of MAXQUEUE now. 98 1998-10-21 Postponed the spinlock changes, would need a lot of 99 testing I currently don't have the time to. Softdcd doesn't 100 work. 101 1998-11-04 Softdcd does not work correctly in DPLL mode, in fact it 102 never did. The DPLL locks on noise, the SYNC unit sees 103 flags that aren't... Restarting the DPLL does not help 104 either, it resynchronizes too slow and the first received 105 frame gets lost. 106 2000-02-13 Fixed for new network driver interface changes, still 107 does TX timeouts itself since it uses its own queue 108 scheme. 109 110 Thanks to all who contributed to this driver with ideas and bug 111 reports! 112 113 NB -- if you find errors, change something, please let me know 114 first before you distribute it... And please don't touch 115 the version number. Just replace my callsign in 116 "v3.0.dl1bke" with your own. Just to avoid confusion... 117 118 If you want to add your modification to the linux distribution 119 please (!) contact me first. 120 121 New versions of the driver will be announced on the linux-hams 122 mailing list on vger.kernel.org. To subscribe send an e-mail 123 to majordomo@vger.kernel.org with the following line in 124 the body of the mail: 125 126 subscribe linux-hams 127 128 The content of the "Subject" field will be ignored. 129 130 vy 73, 131 Joerg Reuter ampr-net: dl1bke@db0pra.ampr.org 132 AX-25 : DL1BKE @ DB0ABH.#BAY.DEU.EU 133 Internet: jreuter@yaina.de 134 www : http://yaina.de/jreuter 135*/ 136 137/* ----------------------------------------------------------------------- */ 138 139#undef SCC_LDELAY /* slow it even a bit more down */ 140#undef SCC_DONT_CHECK /* don't look if the SCCs you specified are available */ 141 142#define SCC_MAXCHIPS 4 /* number of max. supported chips */ 143#define SCC_BUFSIZE 384 /* must not exceed 4096 */ 144#undef SCC_DEBUG 145 146#define SCC_DEFAULT_CLOCK 4915200 147 /* default pclock if nothing is specified */ 148 149/* ----------------------------------------------------------------------- */ 150 151#include <linux/compat.h> 152#include <linux/module.h> 153#include <linux/errno.h> 154#include <linux/signal.h> 155#include <linux/timer.h> 156#include <linux/interrupt.h> 157#include <linux/ioport.h> 158#include <linux/string.h> 159#include <linux/in.h> 160#include <linux/fcntl.h> 161#include <linux/ptrace.h> 162#include <linux/delay.h> 163#include <linux/skbuff.h> 164#include <linux/netdevice.h> 165#include <linux/rtnetlink.h> 166#include <linux/if_ether.h> 167#include <linux/if_arp.h> 168#include <linux/socket.h> 169#include <linux/init.h> 170#include <linux/scc.h> 171#include <linux/ctype.h> 172#include <linux/kernel.h> 173#include <linux/proc_fs.h> 174#include <linux/seq_file.h> 175#include <linux/bitops.h> 176 177#include <net/net_namespace.h> 178#include <net/ax25.h> 179 180#include <asm/irq.h> 181#include <asm/io.h> 182#include <linux/uaccess.h> 183 184#include "z8530.h" 185 186static const char banner[] __initconst = KERN_INFO \ 187 "AX.25: Z8530 SCC driver version "VERSION".dl1bke\n"; 188 189static void t_dwait(struct timer_list *t); 190static void t_txdelay(struct timer_list *t); 191static void t_tail(struct timer_list *t); 192static void t_busy(struct timer_list *); 193static void t_maxkeyup(struct timer_list *); 194static void t_idle(struct timer_list *t); 195static void scc_tx_done(struct scc_channel *); 196static void scc_start_tx_timer(struct scc_channel *, 197 void (*)(struct timer_list *), unsigned long); 198static void scc_start_maxkeyup(struct scc_channel *); 199static void scc_start_defer(struct scc_channel *); 200 201static void z8530_init(void); 202 203static void init_channel(struct scc_channel *scc); 204static void scc_key_trx (struct scc_channel *scc, char tx); 205static void scc_init_timer(struct scc_channel *scc); 206 207static int scc_net_alloc(const char *name, struct scc_channel *scc); 208static void scc_net_setup(struct net_device *dev); 209static int scc_net_open(struct net_device *dev); 210static int scc_net_close(struct net_device *dev); 211static void scc_net_rx(struct scc_channel *scc, struct sk_buff *skb); 212static netdev_tx_t scc_net_tx(struct sk_buff *skb, 213 struct net_device *dev); 214static int scc_net_siocdevprivate(struct net_device *dev, struct ifreq *ifr, 215 void __user *data, int cmd); 216static int scc_net_set_mac_address(struct net_device *dev, void *addr); 217static struct net_device_stats * scc_net_get_stats(struct net_device *dev); 218 219static unsigned char SCC_DriverName[] = "scc"; 220 221static struct irqflags { unsigned char used : 1; } Ivec[NR_IRQS]; 222 223static struct scc_channel SCC_Info[2 * SCC_MAXCHIPS]; /* information per channel */ 224 225static struct scc_ctrl { 226 io_port chan_A; 227 io_port chan_B; 228 int irq; 229} SCC_ctrl[SCC_MAXCHIPS+1]; 230 231static unsigned char Driver_Initialized; 232static int Nchips; 233static io_port Vector_Latch; 234 235 236/* ******************************************************************** */ 237/* * Port Access Functions * */ 238/* ******************************************************************** */ 239 240/* These provide interrupt save 2-step access to the Z8530 registers */ 241 242static DEFINE_SPINLOCK(iolock); /* Guards paired accesses */ 243 244static inline unsigned char InReg(io_port port, unsigned char reg) 245{ 246 unsigned long flags; 247 unsigned char r; 248 249 spin_lock_irqsave(&iolock, flags); 250#ifdef SCC_LDELAY 251 Outb(port, reg); 252 udelay(SCC_LDELAY); 253 r=Inb(port); 254 udelay(SCC_LDELAY); 255#else 256 Outb(port, reg); 257 r=Inb(port); 258#endif 259 spin_unlock_irqrestore(&iolock, flags); 260 return r; 261} 262 263static inline void OutReg(io_port port, unsigned char reg, unsigned char val) 264{ 265 unsigned long flags; 266 267 spin_lock_irqsave(&iolock, flags); 268#ifdef SCC_LDELAY 269 Outb(port, reg); udelay(SCC_LDELAY); 270 Outb(port, val); udelay(SCC_LDELAY); 271#else 272 Outb(port, reg); 273 Outb(port, val); 274#endif 275 spin_unlock_irqrestore(&iolock, flags); 276} 277 278static inline void wr(struct scc_channel *scc, unsigned char reg, 279 unsigned char val) 280{ 281 OutReg(scc->ctrl, reg, (scc->wreg[reg] = val)); 282} 283 284static inline void or(struct scc_channel *scc, unsigned char reg, unsigned char val) 285{ 286 OutReg(scc->ctrl, reg, (scc->wreg[reg] |= val)); 287} 288 289static inline void cl(struct scc_channel *scc, unsigned char reg, unsigned char val) 290{ 291 OutReg(scc->ctrl, reg, (scc->wreg[reg] &= ~val)); 292} 293 294/* ******************************************************************** */ 295/* * Some useful macros * */ 296/* ******************************************************************** */ 297 298static inline void scc_discard_buffers(struct scc_channel *scc) 299{ 300 unsigned long flags; 301 302 spin_lock_irqsave(&scc->lock, flags); 303 if (scc->tx_buff != NULL) 304 { 305 dev_kfree_skb_irq(scc->tx_buff); 306 scc->tx_buff = NULL; 307 } 308 309 while (!skb_queue_empty(&scc->tx_queue)) 310 dev_kfree_skb_irq(skb_dequeue(&scc->tx_queue)); 311 312 spin_unlock_irqrestore(&scc->lock, flags); 313} 314 315 316 317/* ******************************************************************** */ 318/* * Interrupt Service Routines * */ 319/* ******************************************************************** */ 320 321 322/* ----> subroutines for the interrupt handlers <---- */ 323 324static inline void scc_notify(struct scc_channel *scc, int event) 325{ 326 struct sk_buff *skb; 327 char *bp; 328 329 if (scc->kiss.fulldup != KISS_DUPLEX_OPTIMA) 330 return; 331 332 skb = dev_alloc_skb(2); 333 if (skb != NULL) 334 { 335 bp = skb_put(skb, 2); 336 *bp++ = PARAM_HWEVENT; 337 *bp++ = event; 338 scc_net_rx(scc, skb); 339 } else 340 scc->stat.nospace++; 341} 342 343static inline void flush_rx_FIFO(struct scc_channel *scc) 344{ 345 int k; 346 347 for (k=0; k<3; k++) 348 Inb(scc->data); 349 350 if(scc->rx_buff != NULL) /* did we receive something? */ 351 { 352 scc->stat.rxerrs++; /* then count it as an error */ 353 dev_kfree_skb_irq(scc->rx_buff); 354 scc->rx_buff = NULL; 355 } 356} 357 358static void start_hunt(struct scc_channel *scc) 359{ 360 if ((scc->modem.clocksrc != CLK_EXTERNAL)) 361 OutReg(scc->ctrl,R14,SEARCH|scc->wreg[R14]); /* DPLL: enter search mode */ 362 or(scc,R3,ENT_HM|RxENABLE); /* enable the receiver, hunt mode */ 363} 364 365/* ----> four different interrupt handlers for Tx, Rx, changing of */ 366/* DCD/CTS and Rx/Tx errors */ 367 368/* Transmitter interrupt handler */ 369static inline void scc_txint(struct scc_channel *scc) 370{ 371 struct sk_buff *skb; 372 373 scc->stat.txints++; 374 skb = scc->tx_buff; 375 376 /* send first octet */ 377 378 if (skb == NULL) 379 { 380 skb = skb_dequeue(&scc->tx_queue); 381 scc->tx_buff = skb; 382 netif_wake_queue(scc->dev); 383 384 if (skb == NULL) 385 { 386 scc_tx_done(scc); 387 Outb(scc->ctrl, RES_Tx_P); 388 return; 389 } 390 391 if (skb->len == 0) /* Paranoia... */ 392 { 393 dev_kfree_skb_irq(skb); 394 scc->tx_buff = NULL; 395 scc_tx_done(scc); 396 Outb(scc->ctrl, RES_Tx_P); 397 return; 398 } 399 400 scc->stat.tx_state = TXS_ACTIVE; 401 402 OutReg(scc->ctrl, R0, RES_Tx_CRC); 403 /* reset CRC generator */ 404 or(scc,R10,ABUNDER); /* re-install underrun protection */ 405 Outb(scc->data,*skb->data); /* send byte */ 406 skb_pull(skb, 1); 407 408 if (!scc->enhanced) /* reset EOM latch */ 409 Outb(scc->ctrl,RES_EOM_L); 410 return; 411 } 412 413 /* End Of Frame... */ 414 415 if (skb->len == 0) 416 { 417 Outb(scc->ctrl, RES_Tx_P); /* reset pending int */ 418 cl(scc, R10, ABUNDER); /* send CRC */ 419 dev_kfree_skb_irq(skb); 420 scc->tx_buff = NULL; 421 scc->stat.tx_state = TXS_NEWFRAME; /* next frame... */ 422 return; 423 } 424 425 /* send octet */ 426 427 Outb(scc->data,*skb->data); 428 skb_pull(skb, 1); 429} 430 431 432/* External/Status interrupt handler */ 433static inline void scc_exint(struct scc_channel *scc) 434{ 435 unsigned char status,changes,chg_and_stat; 436 437 scc->stat.exints++; 438 439 status = InReg(scc->ctrl,R0); 440 changes = status ^ scc->status; 441 chg_and_stat = changes & status; 442 443 /* ABORT: generated whenever DCD drops while receiving */ 444 445 if (chg_and_stat & BRK_ABRT) /* Received an ABORT */ 446 flush_rx_FIFO(scc); 447 448 /* HUNT: software DCD; on = waiting for SYNC, off = receiving frame */ 449 450 if ((changes & SYNC_HUNT) && scc->kiss.softdcd) 451 { 452 if (status & SYNC_HUNT) 453 { 454 scc->dcd = 0; 455 flush_rx_FIFO(scc); 456 if ((scc->modem.clocksrc != CLK_EXTERNAL)) 457 OutReg(scc->ctrl,R14,SEARCH|scc->wreg[R14]); /* DPLL: enter search mode */ 458 } else { 459 scc->dcd = 1; 460 } 461 462 scc_notify(scc, scc->dcd? HWEV_DCD_OFF:HWEV_DCD_ON); 463 } 464 465 /* DCD: on = start to receive packet, off = ABORT condition */ 466 /* (a successfully received packet generates a special condition int) */ 467 468 if((changes & DCD) && !scc->kiss.softdcd) /* DCD input changed state */ 469 { 470 if(status & DCD) /* DCD is now ON */ 471 { 472 start_hunt(scc); 473 scc->dcd = 1; 474 } else { /* DCD is now OFF */ 475 cl(scc,R3,ENT_HM|RxENABLE); /* disable the receiver */ 476 flush_rx_FIFO(scc); 477 scc->dcd = 0; 478 } 479 480 scc_notify(scc, scc->dcd? HWEV_DCD_ON:HWEV_DCD_OFF); 481 } 482 483#ifdef notdef 484 /* CTS: use external TxDelay (what's that good for?!) 485 * Anyway: If we _could_ use it (BayCom USCC uses CTS for 486 * own purposes) we _should_ use the "autoenable" feature 487 * of the Z8530 and not this interrupt... 488 */ 489 490 if (chg_and_stat & CTS) /* CTS is now ON */ 491 { 492 if (scc->kiss.txdelay == 0) /* zero TXDELAY = wait for CTS */ 493 scc_start_tx_timer(scc, t_txdelay, 0); 494 } 495#endif 496 497 if (scc->stat.tx_state == TXS_ACTIVE && (status & TxEOM)) 498 { 499 scc->stat.tx_under++; /* oops, an underrun! count 'em */ 500 Outb(scc->ctrl, RES_EXT_INT); /* reset ext/status interrupts */ 501 502 if (scc->tx_buff != NULL) 503 { 504 dev_kfree_skb_irq(scc->tx_buff); 505 scc->tx_buff = NULL; 506 } 507 508 or(scc,R10,ABUNDER); 509 scc_start_tx_timer(scc, t_txdelay, 0); /* restart transmission */ 510 } 511 512 scc->status = status; 513 Outb(scc->ctrl,RES_EXT_INT); 514} 515 516 517/* Receiver interrupt handler */ 518static inline void scc_rxint(struct scc_channel *scc) 519{ 520 struct sk_buff *skb; 521 522 scc->stat.rxints++; 523 524 if((scc->wreg[5] & RTS) && scc->kiss.fulldup == KISS_DUPLEX_HALF) 525 { 526 Inb(scc->data); /* discard char */ 527 or(scc,R3,ENT_HM); /* enter hunt mode for next flag */ 528 return; 529 } 530 531 skb = scc->rx_buff; 532 533 if (skb == NULL) 534 { 535 skb = dev_alloc_skb(scc->stat.bufsize); 536 if (skb == NULL) 537 { 538 scc->dev_stat.rx_dropped++; 539 scc->stat.nospace++; 540 Inb(scc->data); 541 or(scc, R3, ENT_HM); 542 return; 543 } 544 545 scc->rx_buff = skb; 546 skb_put_u8(skb, 0); /* KISS data */ 547 } 548 549 if (skb->len >= scc->stat.bufsize) 550 { 551#ifdef notdef 552 printk(KERN_DEBUG "z8530drv: oops, scc_rxint() received huge frame...\n"); 553#endif 554 dev_kfree_skb_irq(skb); 555 scc->rx_buff = NULL; 556 Inb(scc->data); 557 or(scc, R3, ENT_HM); 558 return; 559 } 560 561 skb_put_u8(skb, Inb(scc->data)); 562} 563 564 565/* Receive Special Condition interrupt handler */ 566static inline void scc_spint(struct scc_channel *scc) 567{ 568 unsigned char status; 569 struct sk_buff *skb; 570 571 scc->stat.spints++; 572 573 status = InReg(scc->ctrl,R1); /* read receiver status */ 574 575 Inb(scc->data); /* throw away Rx byte */ 576 skb = scc->rx_buff; 577 578 if(status & Rx_OVR) /* receiver overrun */ 579 { 580 scc->stat.rx_over++; /* count them */ 581 or(scc,R3,ENT_HM); /* enter hunt mode for next flag */ 582 583 if (skb != NULL) 584 dev_kfree_skb_irq(skb); 585 scc->rx_buff = skb = NULL; 586 } 587 588 if(status & END_FR && skb != NULL) /* end of frame */ 589 { 590 /* CRC okay, frame ends on 8 bit boundary and received something ? */ 591 592 if (!(status & CRC_ERR) && (status & 0xe) == RES8 && skb->len > 0) 593 { 594 /* ignore last received byte (first of the CRC bytes) */ 595 skb_trim(skb, skb->len-1); 596 scc_net_rx(scc, skb); 597 scc->rx_buff = NULL; 598 scc->stat.rxframes++; 599 } else { /* a bad frame */ 600 dev_kfree_skb_irq(skb); 601 scc->rx_buff = NULL; 602 scc->stat.rxerrs++; 603 } 604 } 605 606 Outb(scc->ctrl,ERR_RES); 607} 608 609 610/* ----> interrupt service routine for the Z8530 <---- */ 611 612static void scc_isr_dispatch(struct scc_channel *scc, int vector) 613{ 614 spin_lock(&scc->lock); 615 switch (vector & VECTOR_MASK) 616 { 617 case TXINT: scc_txint(scc); break; 618 case EXINT: scc_exint(scc); break; 619 case RXINT: scc_rxint(scc); break; 620 case SPINT: scc_spint(scc); break; 621 } 622 spin_unlock(&scc->lock); 623} 624 625/* If the card has a latch for the interrupt vector (like the PA0HZP card) 626 use it to get the number of the chip that generated the int. 627 If not: poll all defined chips. 628 */ 629 630#define SCC_IRQTIMEOUT 30000 631 632static irqreturn_t scc_isr(int irq, void *dev_id) 633{ 634 int chip_irq = (long) dev_id; 635 unsigned char vector; 636 struct scc_channel *scc; 637 struct scc_ctrl *ctrl; 638 int k; 639 640 if (Vector_Latch) 641 { 642 for(k=0; k < SCC_IRQTIMEOUT; k++) 643 { 644 Outb(Vector_Latch, 0); /* Generate INTACK */ 645 646 /* Read the vector */ 647 if((vector=Inb(Vector_Latch)) >= 16 * Nchips) break; 648 if (vector & 0x01) break; 649 650 scc=&SCC_Info[vector >> 3 ^ 0x01]; 651 if (!scc->dev) break; 652 653 scc_isr_dispatch(scc, vector); 654 655 OutReg(scc->ctrl,R0,RES_H_IUS); /* Reset Highest IUS */ 656 } 657 658 if (k == SCC_IRQTIMEOUT) 659 printk(KERN_WARNING "z8530drv: endless loop in scc_isr()?\n"); 660 661 return IRQ_HANDLED; 662 } 663 664 /* Find the SCC generating the interrupt by polling all attached SCCs 665 * reading RR3A (the interrupt pending register) 666 */ 667 668 ctrl = SCC_ctrl; 669 while (ctrl->chan_A) 670 { 671 if (ctrl->irq != chip_irq) 672 { 673 ctrl++; 674 continue; 675 } 676 677 scc = NULL; 678 for (k = 0; InReg(ctrl->chan_A,R3) && k < SCC_IRQTIMEOUT; k++) 679 { 680 vector=InReg(ctrl->chan_B,R2); /* Read the vector */ 681 if (vector & 0x01) break; 682 683 scc = &SCC_Info[vector >> 3 ^ 0x01]; 684 if (!scc->dev) break; 685 686 scc_isr_dispatch(scc, vector); 687 } 688 689 if (k == SCC_IRQTIMEOUT) 690 { 691 printk(KERN_WARNING "z8530drv: endless loop in scc_isr()?!\n"); 692 break; 693 } 694 695 /* This looks weird and it is. At least the BayCom USCC doesn't 696 * use the Interrupt Daisy Chain, thus we'll have to start 697 * all over again to be sure not to miss an interrupt from 698 * (any of) the other chip(s)... 699 * Honestly, the situation *is* braindamaged... 700 */ 701 702 if (scc != NULL) 703 { 704 OutReg(scc->ctrl,R0,RES_H_IUS); 705 ctrl = SCC_ctrl; 706 } else 707 ctrl++; 708 } 709 return IRQ_HANDLED; 710} 711 712 713 714/* ******************************************************************** */ 715/* * Init Channel */ 716/* ******************************************************************** */ 717 718 719/* ----> set SCC channel speed <---- */ 720 721static inline void set_brg(struct scc_channel *scc, unsigned int tc) 722{ 723 cl(scc,R14,BRENABL); /* disable baudrate generator */ 724 wr(scc,R12,tc & 255); /* brg rate LOW */ 725 wr(scc,R13,tc >> 8); /* brg rate HIGH */ 726 or(scc,R14,BRENABL); /* enable baudrate generator */ 727} 728 729static inline void set_speed(struct scc_channel *scc) 730{ 731 unsigned long flags; 732 spin_lock_irqsave(&scc->lock, flags); 733 734 if (scc->modem.speed > 0) /* paranoia... */ 735 set_brg(scc, (unsigned) (scc->clock / (scc->modem.speed * 64)) - 2); 736 737 spin_unlock_irqrestore(&scc->lock, flags); 738} 739 740 741/* ----> initialize a SCC channel <---- */ 742 743static inline void init_brg(struct scc_channel *scc) 744{ 745 wr(scc, R14, BRSRC); /* BRG source = PCLK */ 746 OutReg(scc->ctrl, R14, SSBR|scc->wreg[R14]); /* DPLL source = BRG */ 747 OutReg(scc->ctrl, R14, SNRZI|scc->wreg[R14]); /* DPLL NRZI mode */ 748} 749 750/* 751 * Initialization according to the Z8530 manual (SGS-Thomson's version): 752 * 753 * 1. Modes and constants 754 * 755 * WR9 11000000 chip reset 756 * WR4 XXXXXXXX Tx/Rx control, async or sync mode 757 * WR1 0XX00X00 select W/REQ (optional) 758 * WR2 XXXXXXXX program interrupt vector 759 * WR3 XXXXXXX0 select Rx control 760 * WR5 XXXX0XXX select Tx control 761 * WR6 XXXXXXXX sync character 762 * WR7 XXXXXXXX sync character 763 * WR9 000X0XXX select interrupt control 764 * WR10 XXXXXXXX miscellaneous control (optional) 765 * WR11 XXXXXXXX clock control 766 * WR12 XXXXXXXX time constant lower byte (optional) 767 * WR13 XXXXXXXX time constant upper byte (optional) 768 * WR14 XXXXXXX0 miscellaneous control 769 * WR14 XXXSSSSS commands (optional) 770 * 771 * 2. Enables 772 * 773 * WR14 000SSSS1 baud rate enable 774 * WR3 SSSSSSS1 Rx enable 775 * WR5 SSSS1SSS Tx enable 776 * WR0 10000000 reset Tx CRG (optional) 777 * WR1 XSS00S00 DMA enable (optional) 778 * 779 * 3. Interrupt status 780 * 781 * WR15 XXXXXXXX enable external/status 782 * WR0 00010000 reset external status 783 * WR0 00010000 reset external status twice 784 * WR1 SSSXXSXX enable Rx, Tx and Ext/status 785 * WR9 000SXSSS enable master interrupt enable 786 * 787 * 1 = set to one, 0 = reset to zero 788 * X = user defined, S = same as previous init 789 * 790 * 791 * Note that the implementation differs in some points from above scheme. 792 * 793 */ 794 795static void init_channel(struct scc_channel *scc) 796{ 797 del_timer(&scc->tx_t); 798 del_timer(&scc->tx_wdog); 799 800 disable_irq(scc->irq); 801 802 wr(scc,R4,X1CLK|SDLC); /* *1 clock, SDLC mode */ 803 wr(scc,R1,0); /* no W/REQ operation */ 804 wr(scc,R3,Rx8|RxCRC_ENAB); /* RX 8 bits/char, CRC, disabled */ 805 wr(scc,R5,Tx8|DTR|TxCRC_ENAB); /* TX 8 bits/char, disabled, DTR */ 806 wr(scc,R6,0); /* SDLC address zero (not used) */ 807 wr(scc,R7,FLAG); /* SDLC flag value */ 808 wr(scc,R9,VIS); /* vector includes status */ 809 wr(scc,R10,(scc->modem.nrz? NRZ : NRZI)|CRCPS|ABUNDER); /* abort on underrun, preset CRC generator, NRZ(I) */ 810 wr(scc,R14, 0); 811 812 813/* set clock sources: 814 815 CLK_DPLL: normal halfduplex operation 816 817 RxClk: use DPLL 818 TxClk: use DPLL 819 TRxC mode DPLL output 820 821 CLK_EXTERNAL: external clocking (G3RUH or DF9IC modem) 822 823 BayCom: others: 824 825 TxClk = pin RTxC TxClk = pin TRxC 826 RxClk = pin TRxC RxClk = pin RTxC 827 828 829 CLK_DIVIDER: 830 RxClk = use DPLL 831 TxClk = pin RTxC 832 833 BayCom: others: 834 pin TRxC = DPLL pin TRxC = BRG 835 (RxClk * 1) (RxClk * 32) 836*/ 837 838 839 switch(scc->modem.clocksrc) 840 { 841 case CLK_DPLL: 842 wr(scc, R11, RCDPLL|TCDPLL|TRxCOI|TRxCDP); 843 init_brg(scc); 844 break; 845 846 case CLK_DIVIDER: 847 wr(scc, R11, ((scc->brand & BAYCOM)? TRxCDP : TRxCBR) | RCDPLL|TCRTxCP|TRxCOI); 848 init_brg(scc); 849 break; 850 851 case CLK_EXTERNAL: 852 wr(scc, R11, (scc->brand & BAYCOM)? RCTRxCP|TCRTxCP : RCRTxCP|TCTRxCP); 853 OutReg(scc->ctrl, R14, DISDPLL); 854 break; 855 856 } 857 858 set_speed(scc); /* set baudrate */ 859 860 if(scc->enhanced) 861 { 862 or(scc,R15,SHDLCE|FIFOE); /* enable FIFO, SDLC/HDLC Enhancements (From now R7 is R7') */ 863 wr(scc,R7,AUTOEOM); 864 } 865 866 if(scc->kiss.softdcd || (InReg(scc->ctrl,R0) & DCD)) 867 /* DCD is now ON */ 868 { 869 start_hunt(scc); 870 } 871 872 /* enable ABORT, DCD & SYNC/HUNT interrupts */ 873 874 wr(scc,R15, BRKIE|TxUIE|(scc->kiss.softdcd? SYNCIE:DCDIE)); 875 876 Outb(scc->ctrl,RES_EXT_INT); /* reset ext/status interrupts */ 877 Outb(scc->ctrl,RES_EXT_INT); /* must be done twice */ 878 879 or(scc,R1,INT_ALL_Rx|TxINT_ENAB|EXT_INT_ENAB); /* enable interrupts */ 880 881 scc->status = InReg(scc->ctrl,R0); /* read initial status */ 882 883 or(scc,R9,MIE); /* master interrupt enable */ 884 885 scc_init_timer(scc); 886 887 enable_irq(scc->irq); 888} 889 890 891 892 893/* ******************************************************************** */ 894/* * SCC timer functions * */ 895/* ******************************************************************** */ 896 897 898/* ----> scc_key_trx sets the time constant for the baudrate 899 generator and keys the transmitter <---- */ 900 901static void scc_key_trx(struct scc_channel *scc, char tx) 902{ 903 unsigned int time_const; 904 905 if (scc->brand & PRIMUS) 906 Outb(scc->ctrl + 4, scc->option | (tx? 0x80 : 0)); 907 908 if (scc->modem.speed < 300) 909 scc->modem.speed = 1200; 910 911 time_const = (unsigned) (scc->clock / (scc->modem.speed * (tx? 2:64))) - 2; 912 913 disable_irq(scc->irq); 914 915 if (tx) 916 { 917 or(scc, R1, TxINT_ENAB); /* t_maxkeyup may have reset these */ 918 or(scc, R15, TxUIE); 919 } 920 921 if (scc->modem.clocksrc == CLK_DPLL) 922 { /* force simplex operation */ 923 if (tx) 924 { 925#ifdef CONFIG_SCC_TRXECHO 926 cl(scc, R3, RxENABLE|ENT_HM); /* switch off receiver */ 927 cl(scc, R15, DCDIE|SYNCIE); /* No DCD changes, please */ 928#endif 929 set_brg(scc, time_const); /* reprogram baudrate generator */ 930 931 /* DPLL -> Rx clk, BRG -> Tx CLK, TRxC mode output, TRxC = BRG */ 932 wr(scc, R11, RCDPLL|TCBR|TRxCOI|TRxCBR); 933 934 /* By popular demand: tx_inhibit */ 935 if (scc->kiss.tx_inhibit) 936 { 937 or(scc,R5, TxENAB); 938 scc->wreg[R5] |= RTS; 939 } else { 940 or(scc,R5,RTS|TxENAB); /* set the RTS line and enable TX */ 941 } 942 } else { 943 cl(scc,R5,RTS|TxENAB); 944 945 set_brg(scc, time_const); /* reprogram baudrate generator */ 946 947 /* DPLL -> Rx clk, DPLL -> Tx CLK, TRxC mode output, TRxC = DPLL */ 948 wr(scc, R11, RCDPLL|TCDPLL|TRxCOI|TRxCDP); 949 950#ifndef CONFIG_SCC_TRXECHO 951 if (scc->kiss.softdcd) 952#endif 953 { 954 or(scc,R15, scc->kiss.softdcd? SYNCIE:DCDIE); 955 start_hunt(scc); 956 } 957 } 958 } else { 959 if (tx) 960 { 961#ifdef CONFIG_SCC_TRXECHO 962 if (scc->kiss.fulldup == KISS_DUPLEX_HALF) 963 { 964 cl(scc, R3, RxENABLE); 965 cl(scc, R15, DCDIE|SYNCIE); 966 } 967#endif 968 969 if (scc->kiss.tx_inhibit) 970 { 971 or(scc,R5, TxENAB); 972 scc->wreg[R5] |= RTS; 973 } else { 974 or(scc,R5,RTS|TxENAB); /* enable tx */ 975 } 976 } else { 977 cl(scc,R5,RTS|TxENAB); /* disable tx */ 978 979 if ((scc->kiss.fulldup == KISS_DUPLEX_HALF) && 980#ifndef CONFIG_SCC_TRXECHO 981 scc->kiss.softdcd) 982#else 983 1) 984#endif 985 { 986 or(scc, R15, scc->kiss.softdcd? SYNCIE:DCDIE); 987 start_hunt(scc); 988 } 989 } 990 } 991 992 enable_irq(scc->irq); 993} 994 995 996/* ----> SCC timer interrupt handler and friends. <---- */ 997 998static void __scc_start_tx_timer(struct scc_channel *scc, 999 void (*handler)(struct timer_list *t), 1000 unsigned long when) 1001{ 1002 del_timer(&scc->tx_t); 1003 1004 if (when == 0) 1005 { 1006 handler(&scc->tx_t); 1007 } else 1008 if (when != TIMER_OFF) 1009 { 1010 scc->tx_t.function = handler; 1011 scc->tx_t.expires = jiffies + (when*HZ)/100; 1012 add_timer(&scc->tx_t); 1013 } 1014} 1015 1016static void scc_start_tx_timer(struct scc_channel *scc, 1017 void (*handler)(struct timer_list *t), 1018 unsigned long when) 1019{ 1020 unsigned long flags; 1021 1022 spin_lock_irqsave(&scc->lock, flags); 1023 __scc_start_tx_timer(scc, handler, when); 1024 spin_unlock_irqrestore(&scc->lock, flags); 1025} 1026 1027static void scc_start_defer(struct scc_channel *scc) 1028{ 1029 unsigned long flags; 1030 1031 spin_lock_irqsave(&scc->lock, flags); 1032 del_timer(&scc->tx_wdog); 1033 1034 if (scc->kiss.maxdefer != 0 && scc->kiss.maxdefer != TIMER_OFF) 1035 { 1036 scc->tx_wdog.function = t_busy; 1037 scc->tx_wdog.expires = jiffies + HZ*scc->kiss.maxdefer; 1038 add_timer(&scc->tx_wdog); 1039 } 1040 spin_unlock_irqrestore(&scc->lock, flags); 1041} 1042 1043static void scc_start_maxkeyup(struct scc_channel *scc) 1044{ 1045 unsigned long flags; 1046 1047 spin_lock_irqsave(&scc->lock, flags); 1048 del_timer(&scc->tx_wdog); 1049 1050 if (scc->kiss.maxkeyup != 0 && scc->kiss.maxkeyup != TIMER_OFF) 1051 { 1052 scc->tx_wdog.function = t_maxkeyup; 1053 scc->tx_wdog.expires = jiffies + HZ*scc->kiss.maxkeyup; 1054 add_timer(&scc->tx_wdog); 1055 } 1056 spin_unlock_irqrestore(&scc->lock, flags); 1057} 1058 1059/* 1060 * This is called from scc_txint() when there are no more frames to send. 1061 * Not exactly a timer function, but it is a close friend of the family... 1062 */ 1063 1064static void scc_tx_done(struct scc_channel *scc) 1065{ 1066 /* 1067 * trx remains keyed in fulldup mode 2 until t_idle expires. 1068 */ 1069 1070 switch (scc->kiss.fulldup) 1071 { 1072 case KISS_DUPLEX_LINK: 1073 scc->stat.tx_state = TXS_IDLE2; 1074 if (scc->kiss.idletime != TIMER_OFF) 1075 scc_start_tx_timer(scc, t_idle, 1076 scc->kiss.idletime*100); 1077 break; 1078 case KISS_DUPLEX_OPTIMA: 1079 scc_notify(scc, HWEV_ALL_SENT); 1080 break; 1081 default: 1082 scc->stat.tx_state = TXS_BUSY; 1083 scc_start_tx_timer(scc, t_tail, scc->kiss.tailtime); 1084 } 1085 1086 netif_wake_queue(scc->dev); 1087} 1088 1089 1090static unsigned char Rand = 17; 1091 1092static inline int is_grouped(struct scc_channel *scc) 1093{ 1094 int k; 1095 struct scc_channel *scc2; 1096 unsigned char grp1, grp2; 1097 1098 grp1 = scc->kiss.group; 1099 1100 for (k = 0; k < (Nchips * 2); k++) 1101 { 1102 scc2 = &SCC_Info[k]; 1103 grp2 = scc2->kiss.group; 1104 1105 if (scc2 == scc || !(scc2->dev && grp2)) 1106 continue; 1107 1108 if ((grp1 & 0x3f) == (grp2 & 0x3f)) 1109 { 1110 if ( (grp1 & TXGROUP) && (scc2->wreg[R5] & RTS) ) 1111 return 1; 1112 1113 if ( (grp1 & RXGROUP) && scc2->dcd ) 1114 return 1; 1115 } 1116 } 1117 return 0; 1118} 1119 1120/* DWAIT and SLOTTIME expired 1121 * 1122 * fulldup == 0: DCD is active or Rand > P-persistence: start t_busy timer 1123 * else key trx and start txdelay 1124 * fulldup == 1: key trx and start txdelay 1125 * fulldup == 2: mintime expired, reset status or key trx and start txdelay 1126 */ 1127 1128static void t_dwait(struct timer_list *t) 1129{ 1130 struct scc_channel *scc = from_timer(scc, t, tx_t); 1131 1132 if (scc->stat.tx_state == TXS_WAIT) /* maxkeyup or idle timeout */ 1133 { 1134 if (skb_queue_empty(&scc->tx_queue)) { /* nothing to send */ 1135 scc->stat.tx_state = TXS_IDLE; 1136 netif_wake_queue(scc->dev); /* t_maxkeyup locked it. */ 1137 return; 1138 } 1139 1140 scc->stat.tx_state = TXS_BUSY; 1141 } 1142 1143 if (scc->kiss.fulldup == KISS_DUPLEX_HALF) 1144 { 1145 Rand = Rand * 17 + 31; 1146 1147 if (scc->dcd || (scc->kiss.persist) < Rand || (scc->kiss.group && is_grouped(scc)) ) 1148 { 1149 scc_start_defer(scc); 1150 scc_start_tx_timer(scc, t_dwait, scc->kiss.slottime); 1151 return ; 1152 } 1153 } 1154 1155 if ( !(scc->wreg[R5] & RTS) ) 1156 { 1157 scc_key_trx(scc, TX_ON); 1158 scc_start_tx_timer(scc, t_txdelay, scc->kiss.txdelay); 1159 } else { 1160 scc_start_tx_timer(scc, t_txdelay, 0); 1161 } 1162} 1163 1164 1165/* TXDELAY expired 1166 * 1167 * kick transmission by a fake scc_txint(scc), start 'maxkeyup' watchdog. 1168 */ 1169 1170static void t_txdelay(struct timer_list *t) 1171{ 1172 struct scc_channel *scc = from_timer(scc, t, tx_t); 1173 1174 scc_start_maxkeyup(scc); 1175 1176 if (scc->tx_buff == NULL) 1177 { 1178 disable_irq(scc->irq); 1179 scc_txint(scc); 1180 enable_irq(scc->irq); 1181 } 1182} 1183 1184 1185/* TAILTIME expired 1186 * 1187 * switch off transmitter. If we were stopped by Maxkeyup restart 1188 * transmission after 'mintime' seconds 1189 */ 1190 1191static void t_tail(struct timer_list *t) 1192{ 1193 struct scc_channel *scc = from_timer(scc, t, tx_t); 1194 unsigned long flags; 1195 1196 spin_lock_irqsave(&scc->lock, flags); 1197 del_timer(&scc->tx_wdog); 1198 scc_key_trx(scc, TX_OFF); 1199 spin_unlock_irqrestore(&scc->lock, flags); 1200 1201 if (scc->stat.tx_state == TXS_TIMEOUT) /* we had a timeout? */ 1202 { 1203 scc->stat.tx_state = TXS_WAIT; 1204 scc_start_tx_timer(scc, t_dwait, scc->kiss.mintime*100); 1205 return; 1206 } 1207 1208 scc->stat.tx_state = TXS_IDLE; 1209 netif_wake_queue(scc->dev); 1210} 1211 1212 1213/* BUSY timeout 1214 * 1215 * throw away send buffers if DCD remains active too long. 1216 */ 1217 1218static void t_busy(struct timer_list *t) 1219{ 1220 struct scc_channel *scc = from_timer(scc, t, tx_wdog); 1221 1222 del_timer(&scc->tx_t); 1223 netif_stop_queue(scc->dev); /* don't pile on the wabbit! */ 1224 1225 scc_discard_buffers(scc); 1226 scc->stat.txerrs++; 1227 scc->stat.tx_state = TXS_IDLE; 1228 1229 netif_wake_queue(scc->dev); 1230} 1231 1232/* MAXKEYUP timeout 1233 * 1234 * this is our watchdog. 1235 */ 1236 1237static void t_maxkeyup(struct timer_list *t) 1238{ 1239 struct scc_channel *scc = from_timer(scc, t, tx_wdog); 1240 unsigned long flags; 1241 1242 spin_lock_irqsave(&scc->lock, flags); 1243 /* 1244 * let things settle down before we start to 1245 * accept new data. 1246 */ 1247 1248 netif_stop_queue(scc->dev); 1249 scc_discard_buffers(scc); 1250 1251 del_timer(&scc->tx_t); 1252 1253 cl(scc, R1, TxINT_ENAB); /* force an ABORT, but don't */ 1254 cl(scc, R15, TxUIE); /* count it. */ 1255 OutReg(scc->ctrl, R0, RES_Tx_P); 1256 1257 spin_unlock_irqrestore(&scc->lock, flags); 1258 1259 scc->stat.txerrs++; 1260 scc->stat.tx_state = TXS_TIMEOUT; 1261 scc_start_tx_timer(scc, t_tail, scc->kiss.tailtime); 1262} 1263 1264/* IDLE timeout 1265 * 1266 * in fulldup mode 2 it keys down the transmitter after 'idle' seconds 1267 * of inactivity. We will not restart transmission before 'mintime' 1268 * expires. 1269 */ 1270 1271static void t_idle(struct timer_list *t) 1272{ 1273 struct scc_channel *scc = from_timer(scc, t, tx_t); 1274 1275 del_timer(&scc->tx_wdog); 1276 1277 scc_key_trx(scc, TX_OFF); 1278 if(scc->kiss.mintime) 1279 scc_start_tx_timer(scc, t_dwait, scc->kiss.mintime*100); 1280 scc->stat.tx_state = TXS_WAIT; 1281} 1282 1283static void scc_init_timer(struct scc_channel *scc) 1284{ 1285 unsigned long flags; 1286 1287 spin_lock_irqsave(&scc->lock, flags); 1288 scc->stat.tx_state = TXS_IDLE; 1289 spin_unlock_irqrestore(&scc->lock, flags); 1290} 1291 1292 1293/* ******************************************************************** */ 1294/* * Set/get L1 parameters * */ 1295/* ******************************************************************** */ 1296 1297 1298/* 1299 * this will set the "hardware" parameters through KISS commands or ioctl() 1300 */ 1301 1302#define CAST(x) (unsigned long)(x) 1303 1304static unsigned int scc_set_param(struct scc_channel *scc, unsigned int cmd, unsigned int arg) 1305{ 1306 switch (cmd) 1307 { 1308 case PARAM_TXDELAY: scc->kiss.txdelay=arg; break; 1309 case PARAM_PERSIST: scc->kiss.persist=arg; break; 1310 case PARAM_SLOTTIME: scc->kiss.slottime=arg; break; 1311 case PARAM_TXTAIL: scc->kiss.tailtime=arg; break; 1312 case PARAM_FULLDUP: scc->kiss.fulldup=arg; break; 1313 case PARAM_DTR: break; /* does someone need this? */ 1314 case PARAM_GROUP: scc->kiss.group=arg; break; 1315 case PARAM_IDLE: scc->kiss.idletime=arg; break; 1316 case PARAM_MIN: scc->kiss.mintime=arg; break; 1317 case PARAM_MAXKEY: scc->kiss.maxkeyup=arg; break; 1318 case PARAM_WAIT: scc->kiss.waittime=arg; break; 1319 case PARAM_MAXDEFER: scc->kiss.maxdefer=arg; break; 1320 case PARAM_TX: scc->kiss.tx_inhibit=arg; break; 1321 1322 case PARAM_SOFTDCD: 1323 scc->kiss.softdcd=arg; 1324 if (arg) 1325 { 1326 or(scc, R15, SYNCIE); 1327 cl(scc, R15, DCDIE); 1328 start_hunt(scc); 1329 } else { 1330 or(scc, R15, DCDIE); 1331 cl(scc, R15, SYNCIE); 1332 } 1333 break; 1334 1335 case PARAM_SPEED: 1336 if (arg < 256) 1337 scc->modem.speed=arg*100; 1338 else 1339 scc->modem.speed=arg; 1340 1341 if (scc->stat.tx_state == 0) /* only switch baudrate on rx... ;-) */ 1342 set_speed(scc); 1343 break; 1344 1345 case PARAM_RTS: 1346 if ( !(scc->wreg[R5] & RTS) ) 1347 { 1348 if (arg != TX_OFF) { 1349 scc_key_trx(scc, TX_ON); 1350 scc_start_tx_timer(scc, t_txdelay, scc->kiss.txdelay); 1351 } 1352 } else { 1353 if (arg == TX_OFF) 1354 { 1355 scc->stat.tx_state = TXS_BUSY; 1356 scc_start_tx_timer(scc, t_tail, scc->kiss.tailtime); 1357 } 1358 } 1359 break; 1360 1361 case PARAM_HWEVENT: 1362 scc_notify(scc, scc->dcd? HWEV_DCD_ON:HWEV_DCD_OFF); 1363 break; 1364 1365 default: return -EINVAL; 1366 } 1367 1368 return 0; 1369} 1370 1371 1372 1373static unsigned long scc_get_param(struct scc_channel *scc, unsigned int cmd) 1374{ 1375 switch (cmd) 1376 { 1377 case PARAM_TXDELAY: return CAST(scc->kiss.txdelay); 1378 case PARAM_PERSIST: return CAST(scc->kiss.persist); 1379 case PARAM_SLOTTIME: return CAST(scc->kiss.slottime); 1380 case PARAM_TXTAIL: return CAST(scc->kiss.tailtime); 1381 case PARAM_FULLDUP: return CAST(scc->kiss.fulldup); 1382 case PARAM_SOFTDCD: return CAST(scc->kiss.softdcd); 1383 case PARAM_DTR: return CAST((scc->wreg[R5] & DTR)? 1:0); 1384 case PARAM_RTS: return CAST((scc->wreg[R5] & RTS)? 1:0); 1385 case PARAM_SPEED: return CAST(scc->modem.speed); 1386 case PARAM_GROUP: return CAST(scc->kiss.group); 1387 case PARAM_IDLE: return CAST(scc->kiss.idletime); 1388 case PARAM_MIN: return CAST(scc->kiss.mintime); 1389 case PARAM_MAXKEY: return CAST(scc->kiss.maxkeyup); 1390 case PARAM_WAIT: return CAST(scc->kiss.waittime); 1391 case PARAM_MAXDEFER: return CAST(scc->kiss.maxdefer); 1392 case PARAM_TX: return CAST(scc->kiss.tx_inhibit); 1393 default: return NO_SUCH_PARAM; 1394 } 1395 1396} 1397 1398#undef CAST 1399 1400/* ******************************************************************* */ 1401/* * Send calibration pattern * */ 1402/* ******************************************************************* */ 1403 1404static void scc_stop_calibrate(struct timer_list *t) 1405{ 1406 struct scc_channel *scc = from_timer(scc, t, tx_wdog); 1407 unsigned long flags; 1408 1409 spin_lock_irqsave(&scc->lock, flags); 1410 del_timer(&scc->tx_wdog); 1411 scc_key_trx(scc, TX_OFF); 1412 wr(scc, R6, 0); 1413 wr(scc, R7, FLAG); 1414 Outb(scc->ctrl,RES_EXT_INT); /* reset ext/status interrupts */ 1415 Outb(scc->ctrl,RES_EXT_INT); 1416 1417 netif_wake_queue(scc->dev); 1418 spin_unlock_irqrestore(&scc->lock, flags); 1419} 1420 1421 1422static void 1423scc_start_calibrate(struct scc_channel *scc, int duration, unsigned char pattern) 1424{ 1425 unsigned long flags; 1426 1427 spin_lock_irqsave(&scc->lock, flags); 1428 netif_stop_queue(scc->dev); 1429 scc_discard_buffers(scc); 1430 1431 del_timer(&scc->tx_wdog); 1432 1433 scc->tx_wdog.function = scc_stop_calibrate; 1434 scc->tx_wdog.expires = jiffies + HZ*duration; 1435 add_timer(&scc->tx_wdog); 1436 1437 /* This doesn't seem to work. Why not? */ 1438 wr(scc, R6, 0); 1439 wr(scc, R7, pattern); 1440 1441 /* 1442 * Don't know if this works. 1443 * Damn, where is my Z8530 programming manual...? 1444 */ 1445 1446 Outb(scc->ctrl,RES_EXT_INT); /* reset ext/status interrupts */ 1447 Outb(scc->ctrl,RES_EXT_INT); 1448 1449 scc_key_trx(scc, TX_ON); 1450 spin_unlock_irqrestore(&scc->lock, flags); 1451} 1452 1453/* ******************************************************************* */ 1454/* * Init channel structures, special HW, etc... * */ 1455/* ******************************************************************* */ 1456 1457/* 1458 * Reset the Z8530s and setup special hardware 1459 */ 1460 1461static void z8530_init(void) 1462{ 1463 struct scc_channel *scc; 1464 int chip, k; 1465 unsigned long flags; 1466 char *flag; 1467 1468 1469 printk(KERN_INFO "Init Z8530 driver: %u channels, IRQ", Nchips*2); 1470 1471 flag=" "; 1472 for (k = 0; k < nr_irqs; k++) 1473 if (Ivec[k].used) 1474 { 1475 printk("%s%d", flag, k); 1476 flag=","; 1477 } 1478 printk("\n"); 1479 1480 1481 /* reset and pre-init all chips in the system */ 1482 for (chip = 0; chip < Nchips; chip++) 1483 { 1484 scc=&SCC_Info[2*chip]; 1485 if (!scc->ctrl) continue; 1486 1487 /* Special SCC cards */ 1488 1489 if(scc->brand & EAGLE) /* this is an EAGLE card */ 1490 Outb(scc->special,0x08); /* enable interrupt on the board */ 1491 1492 if(scc->brand & (PC100 | PRIMUS)) /* this is a PC100/PRIMUS card */ 1493 Outb(scc->special,scc->option); /* set the MODEM mode (0x22) */ 1494 1495 1496 /* Reset and pre-init Z8530 */ 1497 1498 spin_lock_irqsave(&scc->lock, flags); 1499 1500 Outb(scc->ctrl, 0); 1501 OutReg(scc->ctrl,R9,FHWRES); /* force hardware reset */ 1502 udelay(100); /* give it 'a bit' more time than required */ 1503 wr(scc, R2, chip*16); /* interrupt vector */ 1504 wr(scc, R9, VIS); /* vector includes status */ 1505 spin_unlock_irqrestore(&scc->lock, flags); 1506 } 1507 1508 1509 Driver_Initialized = 1; 1510} 1511 1512/* 1513 * Allocate device structure, err, instance, and register driver 1514 */ 1515 1516static int scc_net_alloc(const char *name, struct scc_channel *scc) 1517{ 1518 int err; 1519 struct net_device *dev; 1520 1521 dev = alloc_netdev(0, name, NET_NAME_UNKNOWN, scc_net_setup); 1522 if (!dev) 1523 return -ENOMEM; 1524 1525 dev->ml_priv = scc; 1526 scc->dev = dev; 1527 spin_lock_init(&scc->lock); 1528 timer_setup(&scc->tx_t, NULL, 0); 1529 timer_setup(&scc->tx_wdog, NULL, 0); 1530 1531 err = register_netdevice(dev); 1532 if (err) { 1533 printk(KERN_ERR "%s: can't register network device (%d)\n", 1534 name, err); 1535 free_netdev(dev); 1536 scc->dev = NULL; 1537 return err; 1538 } 1539 1540 return 0; 1541} 1542 1543 1544 1545/* ******************************************************************** */ 1546/* * Network driver methods * */ 1547/* ******************************************************************** */ 1548 1549static const struct net_device_ops scc_netdev_ops = { 1550 .ndo_open = scc_net_open, 1551 .ndo_stop = scc_net_close, 1552 .ndo_start_xmit = scc_net_tx, 1553 .ndo_set_mac_address = scc_net_set_mac_address, 1554 .ndo_get_stats = scc_net_get_stats, 1555 .ndo_siocdevprivate = scc_net_siocdevprivate, 1556}; 1557 1558/* ----> Initialize device <----- */ 1559 1560static void scc_net_setup(struct net_device *dev) 1561{ 1562 dev->tx_queue_len = 16; /* should be enough... */ 1563 1564 dev->netdev_ops = &scc_netdev_ops; 1565 dev->header_ops = &ax25_header_ops; 1566 1567 dev->flags = 0; 1568 1569 dev->type = ARPHRD_AX25; 1570 dev->hard_header_len = AX25_MAX_HEADER_LEN + AX25_BPQ_HEADER_LEN; 1571 dev->mtu = AX25_DEF_PACLEN; 1572 dev->addr_len = AX25_ADDR_LEN; 1573 1574 memcpy(dev->broadcast, &ax25_bcast, AX25_ADDR_LEN); 1575 dev_addr_set(dev, (u8 *)&ax25_defaddr); 1576} 1577 1578/* ----> open network device <---- */ 1579 1580static int scc_net_open(struct net_device *dev) 1581{ 1582 struct scc_channel *scc = (struct scc_channel *) dev->ml_priv; 1583 1584 if (!scc->init) 1585 return -EINVAL; 1586 1587 scc->tx_buff = NULL; 1588 skb_queue_head_init(&scc->tx_queue); 1589 1590 init_channel(scc); 1591 1592 netif_start_queue(dev); 1593 return 0; 1594} 1595 1596/* ----> close network device <---- */ 1597 1598static int scc_net_close(struct net_device *dev) 1599{ 1600 struct scc_channel *scc = (struct scc_channel *) dev->ml_priv; 1601 unsigned long flags; 1602 1603 netif_stop_queue(dev); 1604 1605 spin_lock_irqsave(&scc->lock, flags); 1606 Outb(scc->ctrl,0); /* Make sure pointer is written */ 1607 wr(scc,R1,0); /* disable interrupts */ 1608 wr(scc,R3,0); 1609 spin_unlock_irqrestore(&scc->lock, flags); 1610 1611 del_timer_sync(&scc->tx_t); 1612 del_timer_sync(&scc->tx_wdog); 1613 1614 scc_discard_buffers(scc); 1615 1616 return 0; 1617} 1618 1619/* ----> receive frame, called from scc_rxint() <---- */ 1620 1621static void scc_net_rx(struct scc_channel *scc, struct sk_buff *skb) 1622{ 1623 if (skb->len == 0) { 1624 dev_kfree_skb_irq(skb); 1625 return; 1626 } 1627 1628 scc->dev_stat.rx_packets++; 1629 scc->dev_stat.rx_bytes += skb->len; 1630 1631 skb->protocol = ax25_type_trans(skb, scc->dev); 1632 1633 netif_rx(skb); 1634} 1635 1636/* ----> transmit frame <---- */ 1637 1638static netdev_tx_t scc_net_tx(struct sk_buff *skb, struct net_device *dev) 1639{ 1640 struct scc_channel *scc = (struct scc_channel *) dev->ml_priv; 1641 unsigned long flags; 1642 char kisscmd; 1643 1644 if (skb->protocol == htons(ETH_P_IP)) 1645 return ax25_ip_xmit(skb); 1646 1647 if (skb->len > scc->stat.bufsize || skb->len < 2) { 1648 scc->dev_stat.tx_dropped++; /* bogus frame */ 1649 dev_kfree_skb(skb); 1650 return NETDEV_TX_OK; 1651 } 1652 1653 scc->dev_stat.tx_packets++; 1654 scc->dev_stat.tx_bytes += skb->len; 1655 scc->stat.txframes++; 1656 1657 kisscmd = *skb->data & 0x1f; 1658 skb_pull(skb, 1); 1659 1660 if (kisscmd) { 1661 scc_set_param(scc, kisscmd, *skb->data); 1662 dev_kfree_skb(skb); 1663 return NETDEV_TX_OK; 1664 } 1665 1666 spin_lock_irqsave(&scc->lock, flags); 1667 1668 if (skb_queue_len(&scc->tx_queue) > scc->dev->tx_queue_len) { 1669 struct sk_buff *skb_del; 1670 skb_del = skb_dequeue(&scc->tx_queue); 1671 dev_kfree_skb_irq(skb_del); 1672 } 1673 skb_queue_tail(&scc->tx_queue, skb); 1674 netif_trans_update(dev); 1675 1676 1677 /* 1678 * Start transmission if the trx state is idle or 1679 * t_idle hasn't expired yet. Use dwait/persistence/slottime 1680 * algorithm for normal halfduplex operation. 1681 */ 1682 1683 if(scc->stat.tx_state == TXS_IDLE || scc->stat.tx_state == TXS_IDLE2) { 1684 scc->stat.tx_state = TXS_BUSY; 1685 if (scc->kiss.fulldup == KISS_DUPLEX_HALF) 1686 __scc_start_tx_timer(scc, t_dwait, scc->kiss.waittime); 1687 else 1688 __scc_start_tx_timer(scc, t_dwait, 0); 1689 } 1690 spin_unlock_irqrestore(&scc->lock, flags); 1691 return NETDEV_TX_OK; 1692} 1693 1694/* ----> ioctl functions <---- */ 1695 1696/* 1697 * SIOCSCCCFG - configure driver arg: (struct scc_hw_config *) arg 1698 * SIOCSCCINI - initialize driver arg: --- 1699 * SIOCSCCCHANINI - initialize channel arg: (struct scc_modem *) arg 1700 * SIOCSCCSMEM - set memory arg: (struct scc_mem_config *) arg 1701 * SIOCSCCGKISS - get level 1 parameter arg: (struct scc_kiss_cmd *) arg 1702 * SIOCSCCSKISS - set level 1 parameter arg: (struct scc_kiss_cmd *) arg 1703 * SIOCSCCGSTAT - get driver status arg: (struct scc_stat *) arg 1704 * SIOCSCCCAL - send calib. pattern arg: (struct scc_calibrate *) arg 1705 */ 1706 1707static int scc_net_siocdevprivate(struct net_device *dev, 1708 struct ifreq *ifr, void __user *arg, int cmd) 1709{ 1710 struct scc_kiss_cmd kiss_cmd; 1711 struct scc_mem_config memcfg; 1712 struct scc_hw_config hwcfg; 1713 struct scc_calibrate cal; 1714 struct scc_channel *scc = (struct scc_channel *) dev->ml_priv; 1715 int chan; 1716 unsigned char device_name[IFNAMSIZ]; 1717 1718 if (!Driver_Initialized) 1719 { 1720 if (cmd == SIOCSCCCFG) 1721 { 1722 int found = 1; 1723 1724 if (!capable(CAP_SYS_RAWIO)) return -EPERM; 1725 if (in_compat_syscall()) 1726 return -EOPNOTSUPP; 1727 1728 if (!arg) return -EFAULT; 1729 1730 if (Nchips >= SCC_MAXCHIPS) 1731 return -EINVAL; 1732 1733 if (copy_from_user(&hwcfg, arg, sizeof(hwcfg))) 1734 return -EFAULT; 1735 1736 if (hwcfg.irq == 2) hwcfg.irq = 9; 1737 1738 if (hwcfg.irq < 0 || hwcfg.irq >= nr_irqs) 1739 return -EINVAL; 1740 1741 if (!Ivec[hwcfg.irq].used && hwcfg.irq) 1742 { 1743 if (request_irq(hwcfg.irq, scc_isr, 1744 0, "AX.25 SCC", 1745 (void *)(long) hwcfg.irq)) 1746 printk(KERN_WARNING "z8530drv: warning, cannot get IRQ %d\n", hwcfg.irq); 1747 else 1748 Ivec[hwcfg.irq].used = 1; 1749 } 1750 1751 if (hwcfg.vector_latch && !Vector_Latch) { 1752 if (!request_region(hwcfg.vector_latch, 1, "scc vector latch")) 1753 printk(KERN_WARNING "z8530drv: warning, cannot reserve vector latch port 0x%lx\n, disabled.", hwcfg.vector_latch); 1754 else 1755 Vector_Latch = hwcfg.vector_latch; 1756 } 1757 1758 if (hwcfg.clock == 0) 1759 hwcfg.clock = SCC_DEFAULT_CLOCK; 1760 1761#ifndef SCC_DONT_CHECK 1762 1763 if(request_region(hwcfg.ctrl_a, 1, "scc-probe")) 1764 { 1765 disable_irq(hwcfg.irq); 1766 Outb(hwcfg.ctrl_a, 0); 1767 OutReg(hwcfg.ctrl_a, R9, FHWRES); 1768 udelay(100); 1769 OutReg(hwcfg.ctrl_a,R13,0x55); /* is this chip really there? */ 1770 udelay(5); 1771 1772 if (InReg(hwcfg.ctrl_a,R13) != 0x55) 1773 found = 0; 1774 enable_irq(hwcfg.irq); 1775 release_region(hwcfg.ctrl_a, 1); 1776 } 1777 else 1778 found = 0; 1779#endif 1780 1781 if (found) 1782 { 1783 SCC_Info[2*Nchips ].ctrl = hwcfg.ctrl_a; 1784 SCC_Info[2*Nchips ].data = hwcfg.data_a; 1785 SCC_Info[2*Nchips ].irq = hwcfg.irq; 1786 SCC_Info[2*Nchips+1].ctrl = hwcfg.ctrl_b; 1787 SCC_Info[2*Nchips+1].data = hwcfg.data_b; 1788 SCC_Info[2*Nchips+1].irq = hwcfg.irq; 1789 1790 SCC_ctrl[Nchips].chan_A = hwcfg.ctrl_a; 1791 SCC_ctrl[Nchips].chan_B = hwcfg.ctrl_b; 1792 SCC_ctrl[Nchips].irq = hwcfg.irq; 1793 } 1794 1795 1796 for (chan = 0; chan < 2; chan++) 1797 { 1798 sprintf(device_name, "%s%i", SCC_DriverName, 2*Nchips+chan); 1799 1800 SCC_Info[2*Nchips+chan].special = hwcfg.special; 1801 SCC_Info[2*Nchips+chan].clock = hwcfg.clock; 1802 SCC_Info[2*Nchips+chan].brand = hwcfg.brand; 1803 SCC_Info[2*Nchips+chan].option = hwcfg.option; 1804 SCC_Info[2*Nchips+chan].enhanced = hwcfg.escc; 1805 1806#ifdef SCC_DONT_CHECK 1807 printk(KERN_INFO "%s: data port = 0x%3.3x control port = 0x%3.3x\n", 1808 device_name, 1809 SCC_Info[2*Nchips+chan].data, 1810 SCC_Info[2*Nchips+chan].ctrl); 1811 1812#else 1813 printk(KERN_INFO "%s: data port = 0x%3.3lx control port = 0x%3.3lx -- %s\n", 1814 device_name, 1815 chan? hwcfg.data_b : hwcfg.data_a, 1816 chan? hwcfg.ctrl_b : hwcfg.ctrl_a, 1817 found? "found" : "missing"); 1818#endif 1819 1820 if (found) 1821 { 1822 request_region(SCC_Info[2*Nchips+chan].ctrl, 1, "scc ctrl"); 1823 request_region(SCC_Info[2*Nchips+chan].data, 1, "scc data"); 1824 if (Nchips+chan != 0 && 1825 scc_net_alloc(device_name, 1826 &SCC_Info[2*Nchips+chan])) 1827 return -EINVAL; 1828 } 1829 } 1830 1831 if (found) Nchips++; 1832 1833 return 0; 1834 } 1835 1836 if (cmd == SIOCSCCINI) 1837 { 1838 if (!capable(CAP_SYS_RAWIO)) 1839 return -EPERM; 1840 1841 if (Nchips == 0) 1842 return -EINVAL; 1843 1844 z8530_init(); 1845 return 0; 1846 } 1847 1848 return -EINVAL; /* confuse the user */ 1849 } 1850 1851 if (!scc->init) 1852 { 1853 if (cmd == SIOCSCCCHANINI) 1854 { 1855 if (!capable(CAP_NET_ADMIN)) return -EPERM; 1856 if (!arg) return -EINVAL; 1857 1858 scc->stat.bufsize = SCC_BUFSIZE; 1859 1860 if (copy_from_user(&scc->modem, arg, sizeof(struct scc_modem))) 1861 return -EINVAL; 1862 1863 /* default KISS Params */ 1864 1865 if (scc->modem.speed < 4800) 1866 { 1867 scc->kiss.txdelay = 36; /* 360 ms */ 1868 scc->kiss.persist = 42; /* 25% persistence */ /* was 25 */ 1869 scc->kiss.slottime = 16; /* 160 ms */ 1870 scc->kiss.tailtime = 4; /* minimal reasonable value */ 1871 scc->kiss.fulldup = 0; /* CSMA */ 1872 scc->kiss.waittime = 50; /* 500 ms */ 1873 scc->kiss.maxkeyup = 10; /* 10 s */ 1874 scc->kiss.mintime = 3; /* 3 s */ 1875 scc->kiss.idletime = 30; /* 30 s */ 1876 scc->kiss.maxdefer = 120; /* 2 min */ 1877 scc->kiss.softdcd = 0; /* hardware dcd */ 1878 } else { 1879 scc->kiss.txdelay = 10; /* 100 ms */ 1880 scc->kiss.persist = 64; /* 25% persistence */ /* was 25 */ 1881 scc->kiss.slottime = 8; /* 160 ms */ 1882 scc->kiss.tailtime = 1; /* minimal reasonable value */ 1883 scc->kiss.fulldup = 0; /* CSMA */ 1884 scc->kiss.waittime = 50; /* 500 ms */ 1885 scc->kiss.maxkeyup = 7; /* 7 s */ 1886 scc->kiss.mintime = 3; /* 3 s */ 1887 scc->kiss.idletime = 30; /* 30 s */ 1888 scc->kiss.maxdefer = 120; /* 2 min */ 1889 scc->kiss.softdcd = 0; /* hardware dcd */ 1890 } 1891 1892 scc->tx_buff = NULL; 1893 skb_queue_head_init(&scc->tx_queue); 1894 scc->init = 1; 1895 1896 return 0; 1897 } 1898 1899 return -EINVAL; 1900 } 1901 1902 switch(cmd) 1903 { 1904 case SIOCSCCRESERVED: 1905 return -ENOIOCTLCMD; 1906 1907 case SIOCSCCSMEM: 1908 if (!capable(CAP_SYS_RAWIO)) return -EPERM; 1909 if (!arg || copy_from_user(&memcfg, arg, sizeof(memcfg))) 1910 return -EINVAL; 1911 scc->stat.bufsize = memcfg.bufsize; 1912 return 0; 1913 1914 case SIOCSCCGSTAT: 1915 if (!arg || copy_to_user(arg, &scc->stat, sizeof(scc->stat))) 1916 return -EINVAL; 1917 return 0; 1918 1919 case SIOCSCCGKISS: 1920 if (!arg || copy_from_user(&kiss_cmd, arg, sizeof(kiss_cmd))) 1921 return -EINVAL; 1922 kiss_cmd.param = scc_get_param(scc, kiss_cmd.command); 1923 if (copy_to_user(arg, &kiss_cmd, sizeof(kiss_cmd))) 1924 return -EINVAL; 1925 return 0; 1926 1927 case SIOCSCCSKISS: 1928 if (!capable(CAP_NET_ADMIN)) return -EPERM; 1929 if (!arg || copy_from_user(&kiss_cmd, arg, sizeof(kiss_cmd))) 1930 return -EINVAL; 1931 return scc_set_param(scc, kiss_cmd.command, kiss_cmd.param); 1932 1933 case SIOCSCCCAL: 1934 if (!capable(CAP_SYS_RAWIO)) return -EPERM; 1935 if (!arg || copy_from_user(&cal, arg, sizeof(cal)) || cal.time == 0) 1936 return -EINVAL; 1937 1938 scc_start_calibrate(scc, cal.time, cal.pattern); 1939 return 0; 1940 1941 default: 1942 return -ENOIOCTLCMD; 1943 1944 } 1945 1946 return -EINVAL; 1947} 1948 1949/* ----> set interface callsign <---- */ 1950 1951static int scc_net_set_mac_address(struct net_device *dev, void *addr) 1952{ 1953 struct sockaddr *sa = (struct sockaddr *) addr; 1954 dev_addr_set(dev, sa->sa_data); 1955 return 0; 1956} 1957 1958/* ----> get statistics <---- */ 1959 1960static struct net_device_stats *scc_net_get_stats(struct net_device *dev) 1961{ 1962 struct scc_channel *scc = (struct scc_channel *) dev->ml_priv; 1963 1964 scc->dev_stat.rx_errors = scc->stat.rxerrs + scc->stat.rx_over; 1965 scc->dev_stat.tx_errors = scc->stat.txerrs + scc->stat.tx_under; 1966 scc->dev_stat.rx_fifo_errors = scc->stat.rx_over; 1967 scc->dev_stat.tx_fifo_errors = scc->stat.tx_under; 1968 1969 return &scc->dev_stat; 1970} 1971 1972/* ******************************************************************** */ 1973/* * dump statistics to /proc/net/z8530drv * */ 1974/* ******************************************************************** */ 1975 1976#ifdef CONFIG_PROC_FS 1977 1978static inline struct scc_channel *scc_net_seq_idx(loff_t pos) 1979{ 1980 int k; 1981 1982 for (k = 0; k < Nchips*2; ++k) { 1983 if (!SCC_Info[k].init) 1984 continue; 1985 if (pos-- == 0) 1986 return &SCC_Info[k]; 1987 } 1988 return NULL; 1989} 1990 1991static void *scc_net_seq_start(struct seq_file *seq, loff_t *pos) 1992{ 1993 return *pos ? scc_net_seq_idx(*pos - 1) : SEQ_START_TOKEN; 1994 1995} 1996 1997static void *scc_net_seq_next(struct seq_file *seq, void *v, loff_t *pos) 1998{ 1999 unsigned k; 2000 struct scc_channel *scc = v; 2001 ++*pos; 2002 2003 for (k = (v == SEQ_START_TOKEN) ? 0 : (scc - SCC_Info)+1; 2004 k < Nchips*2; ++k) { 2005 if (SCC_Info[k].init) 2006 return &SCC_Info[k]; 2007 } 2008 return NULL; 2009} 2010 2011static void scc_net_seq_stop(struct seq_file *seq, void *v) 2012{ 2013} 2014 2015static int scc_net_seq_show(struct seq_file *seq, void *v) 2016{ 2017 if (v == SEQ_START_TOKEN) { 2018 seq_puts(seq, "z8530drv-"VERSION"\n"); 2019 } else if (!Driver_Initialized) { 2020 seq_puts(seq, "not initialized\n"); 2021 } else if (!Nchips) { 2022 seq_puts(seq, "chips missing\n"); 2023 } else { 2024 const struct scc_channel *scc = v; 2025 const struct scc_stat *stat = &scc->stat; 2026 const struct scc_kiss *kiss = &scc->kiss; 2027 2028 2029 /* dev data ctrl irq clock brand enh vector special option 2030 * baud nrz clocksrc softdcd bufsize 2031 * rxints txints exints spints 2032 * rcvd rxerrs over / xmit txerrs under / nospace bufsize 2033 * txd pers slot tail ful wait min maxk idl defr txof grp 2034 * W ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## 2035 * R ## ## XX ## ## ## ## ## XX ## ## ## ## ## ## ## 2036 */ 2037 2038 seq_printf(seq, "%s\t%3.3lx %3.3lx %d %lu %2.2x %d %3.3lx %3.3lx %d\n", 2039 scc->dev->name, 2040 scc->data, scc->ctrl, scc->irq, scc->clock, scc->brand, 2041 scc->enhanced, Vector_Latch, scc->special, 2042 scc->option); 2043 seq_printf(seq, "\t%lu %d %d %d %d\n", 2044 scc->modem.speed, scc->modem.nrz, 2045 scc->modem.clocksrc, kiss->softdcd, 2046 stat->bufsize); 2047 seq_printf(seq, "\t%lu %lu %lu %lu\n", 2048 stat->rxints, stat->txints, stat->exints, stat->spints); 2049 seq_printf(seq, "\t%lu %lu %d / %lu %lu %d / %d %d\n", 2050 stat->rxframes, stat->rxerrs, stat->rx_over, 2051 stat->txframes, stat->txerrs, stat->tx_under, 2052 stat->nospace, stat->tx_state); 2053 2054#define K(x) kiss->x 2055 seq_printf(seq, "\t%d %d %d %d %d %d %d %d %d %d %d %d\n", 2056 K(txdelay), K(persist), K(slottime), K(tailtime), 2057 K(fulldup), K(waittime), K(mintime), K(maxkeyup), 2058 K(idletime), K(maxdefer), K(tx_inhibit), K(group)); 2059#undef K 2060#ifdef SCC_DEBUG 2061 { 2062 int reg; 2063 2064 seq_printf(seq, "\tW "); 2065 for (reg = 0; reg < 16; reg++) 2066 seq_printf(seq, "%2.2x ", scc->wreg[reg]); 2067 seq_printf(seq, "\n"); 2068 2069 seq_printf(seq, "\tR %2.2x %2.2x XX ", InReg(scc->ctrl,R0), InReg(scc->ctrl,R1)); 2070 for (reg = 3; reg < 8; reg++) 2071 seq_printf(seq, "%2.2x ", InReg(scc->ctrl, reg)); 2072 seq_printf(seq, "XX "); 2073 for (reg = 9; reg < 16; reg++) 2074 seq_printf(seq, "%2.2x ", InReg(scc->ctrl, reg)); 2075 seq_printf(seq, "\n"); 2076 } 2077#endif 2078 seq_putc(seq, '\n'); 2079 } 2080 2081 return 0; 2082} 2083 2084static const struct seq_operations scc_net_seq_ops = { 2085 .start = scc_net_seq_start, 2086 .next = scc_net_seq_next, 2087 .stop = scc_net_seq_stop, 2088 .show = scc_net_seq_show, 2089}; 2090#endif /* CONFIG_PROC_FS */ 2091 2092 2093/* ******************************************************************** */ 2094/* * Init SCC driver * */ 2095/* ******************************************************************** */ 2096 2097static int __init scc_init_driver (void) 2098{ 2099 char devname[IFNAMSIZ]; 2100 2101 printk(banner); 2102 2103 sprintf(devname,"%s0", SCC_DriverName); 2104 2105 rtnl_lock(); 2106 if (scc_net_alloc(devname, SCC_Info)) { 2107 rtnl_unlock(); 2108 printk(KERN_ERR "z8530drv: cannot initialize module\n"); 2109 return -EIO; 2110 } 2111 rtnl_unlock(); 2112 2113 proc_create_seq("z8530drv", 0, init_net.proc_net, &scc_net_seq_ops); 2114 2115 return 0; 2116} 2117 2118static void __exit scc_cleanup_driver(void) 2119{ 2120 io_port ctrl; 2121 int k; 2122 struct scc_channel *scc; 2123 struct net_device *dev; 2124 2125 if (Nchips == 0 && (dev = SCC_Info[0].dev)) 2126 { 2127 unregister_netdev(dev); 2128 free_netdev(dev); 2129 } 2130 2131 /* Guard against chip prattle */ 2132 local_irq_disable(); 2133 2134 for (k = 0; k < Nchips; k++) 2135 if ( (ctrl = SCC_ctrl[k].chan_A) ) 2136 { 2137 Outb(ctrl, 0); 2138 OutReg(ctrl,R9,FHWRES); /* force hardware reset */ 2139 udelay(50); 2140 } 2141 2142 /* To unload the port must be closed so no real IRQ pending */ 2143 for (k = 0; k < nr_irqs ; k++) 2144 if (Ivec[k].used) free_irq(k, NULL); 2145 2146 local_irq_enable(); 2147 2148 /* Now clean up */ 2149 for (k = 0; k < Nchips*2; k++) 2150 { 2151 scc = &SCC_Info[k]; 2152 if (scc->ctrl) 2153 { 2154 release_region(scc->ctrl, 1); 2155 release_region(scc->data, 1); 2156 } 2157 if (scc->dev) 2158 { 2159 unregister_netdev(scc->dev); 2160 free_netdev(scc->dev); 2161 } 2162 } 2163 2164 2165 if (Vector_Latch) 2166 release_region(Vector_Latch, 1); 2167 2168 remove_proc_entry("z8530drv", init_net.proc_net); 2169} 2170 2171MODULE_AUTHOR("Joerg Reuter <jreuter@yaina.de>"); 2172MODULE_DESCRIPTION("AX.25 Device Driver for Z8530 based HDLC cards"); 2173MODULE_LICENSE("GPL"); 2174module_init(scc_init_driver); 2175module_exit(scc_cleanup_driver); 2176