1// SPDX-License-Identifier: GPL-2.0 2/* Realtek SMI subdriver for the Realtek RTL8366RB ethernet switch 3 * 4 * This is a sparsely documented chip, the only viable documentation seems 5 * to be a patched up code drop from the vendor that appear in various 6 * GPL source trees. 7 * 8 * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org> 9 * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> 10 * Copyright (C) 2010 Antti Seppälä <a.seppala@gmail.com> 11 * Copyright (C) 2010 Roman Yeryomin <roman@advem.lv> 12 * Copyright (C) 2011 Colin Leitner <colin.leitner@googlemail.com> 13 */ 14 15#include <linux/bitops.h> 16#include <linux/etherdevice.h> 17#include <linux/if_bridge.h> 18#include <linux/interrupt.h> 19#include <linux/irqdomain.h> 20#include <linux/irqchip/chained_irq.h> 21#include <linux/of_irq.h> 22#include <linux/regmap.h> 23 24#include "realtek.h" 25 26#define RTL8366RB_PORT_NUM_CPU 5 27#define RTL8366RB_NUM_PORTS 6 28#define RTL8366RB_PHY_NO_MAX 4 29#define RTL8366RB_PHY_ADDR_MAX 31 30 31/* Switch Global Configuration register */ 32#define RTL8366RB_SGCR 0x0000 33#define RTL8366RB_SGCR_EN_BC_STORM_CTRL BIT(0) 34#define RTL8366RB_SGCR_MAX_LENGTH(a) ((a) << 4) 35#define RTL8366RB_SGCR_MAX_LENGTH_MASK RTL8366RB_SGCR_MAX_LENGTH(0x3) 36#define RTL8366RB_SGCR_MAX_LENGTH_1522 RTL8366RB_SGCR_MAX_LENGTH(0x0) 37#define RTL8366RB_SGCR_MAX_LENGTH_1536 RTL8366RB_SGCR_MAX_LENGTH(0x1) 38#define RTL8366RB_SGCR_MAX_LENGTH_1552 RTL8366RB_SGCR_MAX_LENGTH(0x2) 39#define RTL8366RB_SGCR_MAX_LENGTH_16000 RTL8366RB_SGCR_MAX_LENGTH(0x3) 40#define RTL8366RB_SGCR_EN_VLAN BIT(13) 41#define RTL8366RB_SGCR_EN_VLAN_4KTB BIT(14) 42 43/* Port Enable Control register */ 44#define RTL8366RB_PECR 0x0001 45 46/* Switch per-port learning disablement register */ 47#define RTL8366RB_PORT_LEARNDIS_CTRL 0x0002 48 49/* Security control, actually aging register */ 50#define RTL8366RB_SECURITY_CTRL 0x0003 51 52#define RTL8366RB_SSCR2 0x0004 53#define RTL8366RB_SSCR2_DROP_UNKNOWN_DA BIT(0) 54 55/* Port Mode Control registers */ 56#define RTL8366RB_PMC0 0x0005 57#define RTL8366RB_PMC0_SPI BIT(0) 58#define RTL8366RB_PMC0_EN_AUTOLOAD BIT(1) 59#define RTL8366RB_PMC0_PROBE BIT(2) 60#define RTL8366RB_PMC0_DIS_BISR BIT(3) 61#define RTL8366RB_PMC0_ADCTEST BIT(4) 62#define RTL8366RB_PMC0_SRAM_DIAG BIT(5) 63#define RTL8366RB_PMC0_EN_SCAN BIT(6) 64#define RTL8366RB_PMC0_P4_IOMODE_SHIFT 7 65#define RTL8366RB_PMC0_P4_IOMODE_MASK GENMASK(9, 7) 66#define RTL8366RB_PMC0_P5_IOMODE_SHIFT 10 67#define RTL8366RB_PMC0_P5_IOMODE_MASK GENMASK(12, 10) 68#define RTL8366RB_PMC0_SDSMODE_SHIFT 13 69#define RTL8366RB_PMC0_SDSMODE_MASK GENMASK(15, 13) 70#define RTL8366RB_PMC1 0x0006 71 72/* Port Mirror Control Register */ 73#define RTL8366RB_PMCR 0x0007 74#define RTL8366RB_PMCR_SOURCE_PORT(a) (a) 75#define RTL8366RB_PMCR_SOURCE_PORT_MASK 0x000f 76#define RTL8366RB_PMCR_MONITOR_PORT(a) ((a) << 4) 77#define RTL8366RB_PMCR_MONITOR_PORT_MASK 0x00f0 78#define RTL8366RB_PMCR_MIRROR_RX BIT(8) 79#define RTL8366RB_PMCR_MIRROR_TX BIT(9) 80#define RTL8366RB_PMCR_MIRROR_SPC BIT(10) 81#define RTL8366RB_PMCR_MIRROR_ISO BIT(11) 82 83/* bits 0..7 = port 0, bits 8..15 = port 1 */ 84#define RTL8366RB_PAACR0 0x0010 85/* bits 0..7 = port 2, bits 8..15 = port 3 */ 86#define RTL8366RB_PAACR1 0x0011 87/* bits 0..7 = port 4, bits 8..15 = port 5 */ 88#define RTL8366RB_PAACR2 0x0012 89#define RTL8366RB_PAACR_SPEED_10M 0 90#define RTL8366RB_PAACR_SPEED_100M 1 91#define RTL8366RB_PAACR_SPEED_1000M 2 92#define RTL8366RB_PAACR_FULL_DUPLEX BIT(2) 93#define RTL8366RB_PAACR_LINK_UP BIT(4) 94#define RTL8366RB_PAACR_TX_PAUSE BIT(5) 95#define RTL8366RB_PAACR_RX_PAUSE BIT(6) 96#define RTL8366RB_PAACR_AN BIT(7) 97 98#define RTL8366RB_PAACR_CPU_PORT (RTL8366RB_PAACR_SPEED_1000M | \ 99 RTL8366RB_PAACR_FULL_DUPLEX | \ 100 RTL8366RB_PAACR_LINK_UP | \ 101 RTL8366RB_PAACR_TX_PAUSE | \ 102 RTL8366RB_PAACR_RX_PAUSE) 103 104/* bits 0..7 = port 0, bits 8..15 = port 1 */ 105#define RTL8366RB_PSTAT0 0x0014 106/* bits 0..7 = port 2, bits 8..15 = port 3 */ 107#define RTL8366RB_PSTAT1 0x0015 108/* bits 0..7 = port 4, bits 8..15 = port 5 */ 109#define RTL8366RB_PSTAT2 0x0016 110 111#define RTL8366RB_POWER_SAVING_REG 0x0021 112 113/* Spanning tree status (STP) control, two bits per port per FID */ 114#define RTL8366RB_STP_STATE_BASE 0x0050 /* 0x0050..0x0057 */ 115#define RTL8366RB_STP_STATE_DISABLED 0x0 116#define RTL8366RB_STP_STATE_BLOCKING 0x1 117#define RTL8366RB_STP_STATE_LEARNING 0x2 118#define RTL8366RB_STP_STATE_FORWARDING 0x3 119#define RTL8366RB_STP_MASK GENMASK(1, 0) 120#define RTL8366RB_STP_STATE(port, state) \ 121 ((state) << ((port) * 2)) 122#define RTL8366RB_STP_STATE_MASK(port) \ 123 RTL8366RB_STP_STATE((port), RTL8366RB_STP_MASK) 124 125/* CPU port control reg */ 126#define RTL8368RB_CPU_CTRL_REG 0x0061 127#define RTL8368RB_CPU_PORTS_MSK 0x00FF 128/* Disables inserting custom tag length/type 0x8899 */ 129#define RTL8368RB_CPU_NO_TAG BIT(15) 130 131#define RTL8366RB_SMAR0 0x0070 /* bits 0..15 */ 132#define RTL8366RB_SMAR1 0x0071 /* bits 16..31 */ 133#define RTL8366RB_SMAR2 0x0072 /* bits 32..47 */ 134 135#define RTL8366RB_RESET_CTRL_REG 0x0100 136#define RTL8366RB_CHIP_CTRL_RESET_HW BIT(0) 137#define RTL8366RB_CHIP_CTRL_RESET_SW BIT(1) 138 139#define RTL8366RB_CHIP_ID_REG 0x0509 140#define RTL8366RB_CHIP_ID_8366 0x5937 141#define RTL8366RB_CHIP_VERSION_CTRL_REG 0x050A 142#define RTL8366RB_CHIP_VERSION_MASK 0xf 143 144/* PHY registers control */ 145#define RTL8366RB_PHY_ACCESS_CTRL_REG 0x8000 146#define RTL8366RB_PHY_CTRL_READ BIT(0) 147#define RTL8366RB_PHY_CTRL_WRITE 0 148#define RTL8366RB_PHY_ACCESS_BUSY_REG 0x8001 149#define RTL8366RB_PHY_INT_BUSY BIT(0) 150#define RTL8366RB_PHY_EXT_BUSY BIT(4) 151#define RTL8366RB_PHY_ACCESS_DATA_REG 0x8002 152#define RTL8366RB_PHY_EXT_CTRL_REG 0x8010 153#define RTL8366RB_PHY_EXT_WRDATA_REG 0x8011 154#define RTL8366RB_PHY_EXT_RDDATA_REG 0x8012 155 156#define RTL8366RB_PHY_REG_MASK 0x1f 157#define RTL8366RB_PHY_PAGE_OFFSET 5 158#define RTL8366RB_PHY_PAGE_MASK (0xf << 5) 159#define RTL8366RB_PHY_NO_OFFSET 9 160#define RTL8366RB_PHY_NO_MASK (0x1f << 9) 161 162/* VLAN Ingress Control Register 1, one bit per port. 163 * bit 0 .. 5 will make the switch drop ingress frames without 164 * VID such as untagged or priority-tagged frames for respective 165 * port. 166 * bit 6 .. 11 will make the switch drop ingress frames carrying 167 * a C-tag with VID != 0 for respective port. 168 */ 169#define RTL8366RB_VLAN_INGRESS_CTRL1_REG 0x037E 170#define RTL8366RB_VLAN_INGRESS_CTRL1_DROP(port) (BIT((port)) | BIT((port) + 6)) 171 172/* VLAN Ingress Control Register 2, one bit per port. 173 * bit0 .. bit5 will make the switch drop all ingress frames with 174 * a VLAN classification that does not include the port is in its 175 * member set. 176 */ 177#define RTL8366RB_VLAN_INGRESS_CTRL2_REG 0x037f 178 179/* LED control registers */ 180#define RTL8366RB_LED_BLINKRATE_REG 0x0430 181#define RTL8366RB_LED_BLINKRATE_MASK 0x0007 182#define RTL8366RB_LED_BLINKRATE_28MS 0x0000 183#define RTL8366RB_LED_BLINKRATE_56MS 0x0001 184#define RTL8366RB_LED_BLINKRATE_84MS 0x0002 185#define RTL8366RB_LED_BLINKRATE_111MS 0x0003 186#define RTL8366RB_LED_BLINKRATE_222MS 0x0004 187#define RTL8366RB_LED_BLINKRATE_446MS 0x0005 188 189#define RTL8366RB_LED_CTRL_REG 0x0431 190#define RTL8366RB_LED_OFF 0x0 191#define RTL8366RB_LED_DUP_COL 0x1 192#define RTL8366RB_LED_LINK_ACT 0x2 193#define RTL8366RB_LED_SPD1000 0x3 194#define RTL8366RB_LED_SPD100 0x4 195#define RTL8366RB_LED_SPD10 0x5 196#define RTL8366RB_LED_SPD1000_ACT 0x6 197#define RTL8366RB_LED_SPD100_ACT 0x7 198#define RTL8366RB_LED_SPD10_ACT 0x8 199#define RTL8366RB_LED_SPD100_10_ACT 0x9 200#define RTL8366RB_LED_FIBER 0xa 201#define RTL8366RB_LED_AN_FAULT 0xb 202#define RTL8366RB_LED_LINK_RX 0xc 203#define RTL8366RB_LED_LINK_TX 0xd 204#define RTL8366RB_LED_MASTER 0xe 205#define RTL8366RB_LED_FORCE 0xf 206#define RTL8366RB_LED_0_1_CTRL_REG 0x0432 207#define RTL8366RB_LED_1_OFFSET 6 208#define RTL8366RB_LED_2_3_CTRL_REG 0x0433 209#define RTL8366RB_LED_3_OFFSET 6 210 211#define RTL8366RB_MIB_COUNT 33 212#define RTL8366RB_GLOBAL_MIB_COUNT 1 213#define RTL8366RB_MIB_COUNTER_PORT_OFFSET 0x0050 214#define RTL8366RB_MIB_COUNTER_BASE 0x1000 215#define RTL8366RB_MIB_CTRL_REG 0x13F0 216#define RTL8366RB_MIB_CTRL_USER_MASK 0x0FFC 217#define RTL8366RB_MIB_CTRL_BUSY_MASK BIT(0) 218#define RTL8366RB_MIB_CTRL_RESET_MASK BIT(1) 219#define RTL8366RB_MIB_CTRL_PORT_RESET(_p) BIT(2 + (_p)) 220#define RTL8366RB_MIB_CTRL_GLOBAL_RESET BIT(11) 221 222#define RTL8366RB_PORT_VLAN_CTRL_BASE 0x0063 223#define RTL8366RB_PORT_VLAN_CTRL_REG(_p) \ 224 (RTL8366RB_PORT_VLAN_CTRL_BASE + (_p) / 4) 225#define RTL8366RB_PORT_VLAN_CTRL_MASK 0xf 226#define RTL8366RB_PORT_VLAN_CTRL_SHIFT(_p) (4 * ((_p) % 4)) 227 228#define RTL8366RB_VLAN_TABLE_READ_BASE 0x018C 229#define RTL8366RB_VLAN_TABLE_WRITE_BASE 0x0185 230 231#define RTL8366RB_TABLE_ACCESS_CTRL_REG 0x0180 232#define RTL8366RB_TABLE_VLAN_READ_CTRL 0x0E01 233#define RTL8366RB_TABLE_VLAN_WRITE_CTRL 0x0F01 234 235#define RTL8366RB_VLAN_MC_BASE(_x) (0x0020 + (_x) * 3) 236 237#define RTL8366RB_PORT_LINK_STATUS_BASE 0x0014 238#define RTL8366RB_PORT_STATUS_SPEED_MASK 0x0003 239#define RTL8366RB_PORT_STATUS_DUPLEX_MASK 0x0004 240#define RTL8366RB_PORT_STATUS_LINK_MASK 0x0010 241#define RTL8366RB_PORT_STATUS_TXPAUSE_MASK 0x0020 242#define RTL8366RB_PORT_STATUS_RXPAUSE_MASK 0x0040 243#define RTL8366RB_PORT_STATUS_AN_MASK 0x0080 244 245#define RTL8366RB_NUM_VLANS 16 246#define RTL8366RB_NUM_LEDGROUPS 4 247#define RTL8366RB_NUM_VIDS 4096 248#define RTL8366RB_PRIORITYMAX 7 249#define RTL8366RB_NUM_FIDS 8 250#define RTL8366RB_FIDMAX 7 251 252#define RTL8366RB_PORT_1 BIT(0) /* In userspace port 0 */ 253#define RTL8366RB_PORT_2 BIT(1) /* In userspace port 1 */ 254#define RTL8366RB_PORT_3 BIT(2) /* In userspace port 2 */ 255#define RTL8366RB_PORT_4 BIT(3) /* In userspace port 3 */ 256#define RTL8366RB_PORT_5 BIT(4) /* In userspace port 4 */ 257 258#define RTL8366RB_PORT_CPU BIT(5) /* CPU port */ 259 260#define RTL8366RB_PORT_ALL (RTL8366RB_PORT_1 | \ 261 RTL8366RB_PORT_2 | \ 262 RTL8366RB_PORT_3 | \ 263 RTL8366RB_PORT_4 | \ 264 RTL8366RB_PORT_5 | \ 265 RTL8366RB_PORT_CPU) 266 267#define RTL8366RB_PORT_ALL_BUT_CPU (RTL8366RB_PORT_1 | \ 268 RTL8366RB_PORT_2 | \ 269 RTL8366RB_PORT_3 | \ 270 RTL8366RB_PORT_4 | \ 271 RTL8366RB_PORT_5) 272 273#define RTL8366RB_PORT_ALL_EXTERNAL (RTL8366RB_PORT_1 | \ 274 RTL8366RB_PORT_2 | \ 275 RTL8366RB_PORT_3 | \ 276 RTL8366RB_PORT_4) 277 278#define RTL8366RB_PORT_ALL_INTERNAL RTL8366RB_PORT_CPU 279 280/* First configuration word per member config, VID and prio */ 281#define RTL8366RB_VLAN_VID_MASK 0xfff 282#define RTL8366RB_VLAN_PRIORITY_SHIFT 12 283#define RTL8366RB_VLAN_PRIORITY_MASK 0x7 284/* Second configuration word per member config, member and untagged */ 285#define RTL8366RB_VLAN_UNTAG_SHIFT 8 286#define RTL8366RB_VLAN_UNTAG_MASK 0xff 287#define RTL8366RB_VLAN_MEMBER_MASK 0xff 288/* Third config word per member config, STAG currently unused */ 289#define RTL8366RB_VLAN_STAG_MBR_MASK 0xff 290#define RTL8366RB_VLAN_STAG_MBR_SHIFT 8 291#define RTL8366RB_VLAN_STAG_IDX_MASK 0x7 292#define RTL8366RB_VLAN_STAG_IDX_SHIFT 5 293#define RTL8366RB_VLAN_FID_MASK 0x7 294 295/* Port ingress bandwidth control */ 296#define RTL8366RB_IB_BASE 0x0200 297#define RTL8366RB_IB_REG(pnum) (RTL8366RB_IB_BASE + (pnum)) 298#define RTL8366RB_IB_BDTH_MASK 0x3fff 299#define RTL8366RB_IB_PREIFG BIT(14) 300 301/* Port egress bandwidth control */ 302#define RTL8366RB_EB_BASE 0x02d1 303#define RTL8366RB_EB_REG(pnum) (RTL8366RB_EB_BASE + (pnum)) 304#define RTL8366RB_EB_BDTH_MASK 0x3fff 305#define RTL8366RB_EB_PREIFG_REG 0x02f8 306#define RTL8366RB_EB_PREIFG BIT(9) 307 308#define RTL8366RB_BDTH_SW_MAX 1048512 /* 1048576? */ 309#define RTL8366RB_BDTH_UNIT 64 310#define RTL8366RB_BDTH_REG_DEFAULT 16383 311 312/* QOS */ 313#define RTL8366RB_QOS BIT(15) 314/* Include/Exclude Preamble and IFG (20 bytes). 0:Exclude, 1:Include. */ 315#define RTL8366RB_QOS_DEFAULT_PREIFG 1 316 317/* Interrupt handling */ 318#define RTL8366RB_INTERRUPT_CONTROL_REG 0x0440 319#define RTL8366RB_INTERRUPT_POLARITY BIT(0) 320#define RTL8366RB_P4_RGMII_LED BIT(2) 321#define RTL8366RB_INTERRUPT_MASK_REG 0x0441 322#define RTL8366RB_INTERRUPT_LINK_CHGALL GENMASK(11, 0) 323#define RTL8366RB_INTERRUPT_ACLEXCEED BIT(8) 324#define RTL8366RB_INTERRUPT_STORMEXCEED BIT(9) 325#define RTL8366RB_INTERRUPT_P4_FIBER BIT(12) 326#define RTL8366RB_INTERRUPT_P4_UTP BIT(13) 327#define RTL8366RB_INTERRUPT_VALID (RTL8366RB_INTERRUPT_LINK_CHGALL | \ 328 RTL8366RB_INTERRUPT_ACLEXCEED | \ 329 RTL8366RB_INTERRUPT_STORMEXCEED | \ 330 RTL8366RB_INTERRUPT_P4_FIBER | \ 331 RTL8366RB_INTERRUPT_P4_UTP) 332#define RTL8366RB_INTERRUPT_STATUS_REG 0x0442 333#define RTL8366RB_NUM_INTERRUPT 14 /* 0..13 */ 334 335/* Port isolation registers */ 336#define RTL8366RB_PORT_ISO_BASE 0x0F08 337#define RTL8366RB_PORT_ISO(pnum) (RTL8366RB_PORT_ISO_BASE + (pnum)) 338#define RTL8366RB_PORT_ISO_EN BIT(0) 339#define RTL8366RB_PORT_ISO_PORTS_MASK GENMASK(7, 1) 340#define RTL8366RB_PORT_ISO_PORTS(pmask) ((pmask) << 1) 341 342/* bits 0..5 enable force when cleared */ 343#define RTL8366RB_MAC_FORCE_CTRL_REG 0x0F11 344 345#define RTL8366RB_OAM_PARSER_REG 0x0F14 346#define RTL8366RB_OAM_MULTIPLEXER_REG 0x0F15 347 348#define RTL8366RB_GREEN_FEATURE_REG 0x0F51 349#define RTL8366RB_GREEN_FEATURE_MSK 0x0007 350#define RTL8366RB_GREEN_FEATURE_TX BIT(0) 351#define RTL8366RB_GREEN_FEATURE_RX BIT(2) 352 353/** 354 * struct rtl8366rb - RTL8366RB-specific data 355 * @max_mtu: per-port max MTU setting 356 * @pvid_enabled: if PVID is set for respective port 357 */ 358struct rtl8366rb { 359 unsigned int max_mtu[RTL8366RB_NUM_PORTS]; 360 bool pvid_enabled[RTL8366RB_NUM_PORTS]; 361}; 362 363static struct rtl8366_mib_counter rtl8366rb_mib_counters[] = { 364 { 0, 0, 4, "IfInOctets" }, 365 { 0, 4, 4, "EtherStatsOctets" }, 366 { 0, 8, 2, "EtherStatsUnderSizePkts" }, 367 { 0, 10, 2, "EtherFragments" }, 368 { 0, 12, 2, "EtherStatsPkts64Octets" }, 369 { 0, 14, 2, "EtherStatsPkts65to127Octets" }, 370 { 0, 16, 2, "EtherStatsPkts128to255Octets" }, 371 { 0, 18, 2, "EtherStatsPkts256to511Octets" }, 372 { 0, 20, 2, "EtherStatsPkts512to1023Octets" }, 373 { 0, 22, 2, "EtherStatsPkts1024to1518Octets" }, 374 { 0, 24, 2, "EtherOversizeStats" }, 375 { 0, 26, 2, "EtherStatsJabbers" }, 376 { 0, 28, 2, "IfInUcastPkts" }, 377 { 0, 30, 2, "EtherStatsMulticastPkts" }, 378 { 0, 32, 2, "EtherStatsBroadcastPkts" }, 379 { 0, 34, 2, "EtherStatsDropEvents" }, 380 { 0, 36, 2, "Dot3StatsFCSErrors" }, 381 { 0, 38, 2, "Dot3StatsSymbolErrors" }, 382 { 0, 40, 2, "Dot3InPauseFrames" }, 383 { 0, 42, 2, "Dot3ControlInUnknownOpcodes" }, 384 { 0, 44, 4, "IfOutOctets" }, 385 { 0, 48, 2, "Dot3StatsSingleCollisionFrames" }, 386 { 0, 50, 2, "Dot3StatMultipleCollisionFrames" }, 387 { 0, 52, 2, "Dot3sDeferredTransmissions" }, 388 { 0, 54, 2, "Dot3StatsLateCollisions" }, 389 { 0, 56, 2, "EtherStatsCollisions" }, 390 { 0, 58, 2, "Dot3StatsExcessiveCollisions" }, 391 { 0, 60, 2, "Dot3OutPauseFrames" }, 392 { 0, 62, 2, "Dot1dBasePortDelayExceededDiscards" }, 393 { 0, 64, 2, "Dot1dTpPortInDiscards" }, 394 { 0, 66, 2, "IfOutUcastPkts" }, 395 { 0, 68, 2, "IfOutMulticastPkts" }, 396 { 0, 70, 2, "IfOutBroadcastPkts" }, 397}; 398 399static int rtl8366rb_get_mib_counter(struct realtek_priv *priv, 400 int port, 401 struct rtl8366_mib_counter *mib, 402 u64 *mibvalue) 403{ 404 u32 addr, val; 405 int ret; 406 int i; 407 408 addr = RTL8366RB_MIB_COUNTER_BASE + 409 RTL8366RB_MIB_COUNTER_PORT_OFFSET * (port) + 410 mib->offset; 411 412 /* Writing access counter address first 413 * then ASIC will prepare 64bits counter wait for being retrived 414 */ 415 ret = regmap_write(priv->map, addr, 0); /* Write whatever */ 416 if (ret) 417 return ret; 418 419 /* Read MIB control register */ 420 ret = regmap_read(priv->map, RTL8366RB_MIB_CTRL_REG, &val); 421 if (ret) 422 return -EIO; 423 424 if (val & RTL8366RB_MIB_CTRL_BUSY_MASK) 425 return -EBUSY; 426 427 if (val & RTL8366RB_MIB_CTRL_RESET_MASK) 428 return -EIO; 429 430 /* Read each individual MIB 16 bits at the time */ 431 *mibvalue = 0; 432 for (i = mib->length; i > 0; i--) { 433 ret = regmap_read(priv->map, addr + (i - 1), &val); 434 if (ret) 435 return ret; 436 *mibvalue = (*mibvalue << 16) | (val & 0xFFFF); 437 } 438 return 0; 439} 440 441static u32 rtl8366rb_get_irqmask(struct irq_data *d) 442{ 443 int line = irqd_to_hwirq(d); 444 u32 val; 445 446 /* For line interrupts we combine link down in bits 447 * 6..11 with link up in bits 0..5 into one interrupt. 448 */ 449 if (line < 12) 450 val = BIT(line) | BIT(line + 6); 451 else 452 val = BIT(line); 453 return val; 454} 455 456static void rtl8366rb_mask_irq(struct irq_data *d) 457{ 458 struct realtek_priv *priv = irq_data_get_irq_chip_data(d); 459 int ret; 460 461 ret = regmap_update_bits(priv->map, RTL8366RB_INTERRUPT_MASK_REG, 462 rtl8366rb_get_irqmask(d), 0); 463 if (ret) 464 dev_err(priv->dev, "could not mask IRQ\n"); 465} 466 467static void rtl8366rb_unmask_irq(struct irq_data *d) 468{ 469 struct realtek_priv *priv = irq_data_get_irq_chip_data(d); 470 int ret; 471 472 ret = regmap_update_bits(priv->map, RTL8366RB_INTERRUPT_MASK_REG, 473 rtl8366rb_get_irqmask(d), 474 rtl8366rb_get_irqmask(d)); 475 if (ret) 476 dev_err(priv->dev, "could not unmask IRQ\n"); 477} 478 479static irqreturn_t rtl8366rb_irq(int irq, void *data) 480{ 481 struct realtek_priv *priv = data; 482 u32 stat; 483 int ret; 484 485 /* This clears the IRQ status register */ 486 ret = regmap_read(priv->map, RTL8366RB_INTERRUPT_STATUS_REG, 487 &stat); 488 if (ret) { 489 dev_err(priv->dev, "can't read interrupt status\n"); 490 return IRQ_NONE; 491 } 492 stat &= RTL8366RB_INTERRUPT_VALID; 493 if (!stat) 494 return IRQ_NONE; 495 while (stat) { 496 int line = __ffs(stat); 497 int child_irq; 498 499 stat &= ~BIT(line); 500 /* For line interrupts we combine link down in bits 501 * 6..11 with link up in bits 0..5 into one interrupt. 502 */ 503 if (line < 12 && line > 5) 504 line -= 5; 505 child_irq = irq_find_mapping(priv->irqdomain, line); 506 handle_nested_irq(child_irq); 507 } 508 return IRQ_HANDLED; 509} 510 511static struct irq_chip rtl8366rb_irq_chip = { 512 .name = "RTL8366RB", 513 .irq_mask = rtl8366rb_mask_irq, 514 .irq_unmask = rtl8366rb_unmask_irq, 515}; 516 517static int rtl8366rb_irq_map(struct irq_domain *domain, unsigned int irq, 518 irq_hw_number_t hwirq) 519{ 520 irq_set_chip_data(irq, domain->host_data); 521 irq_set_chip_and_handler(irq, &rtl8366rb_irq_chip, handle_simple_irq); 522 irq_set_nested_thread(irq, 1); 523 irq_set_noprobe(irq); 524 525 return 0; 526} 527 528static void rtl8366rb_irq_unmap(struct irq_domain *d, unsigned int irq) 529{ 530 irq_set_nested_thread(irq, 0); 531 irq_set_chip_and_handler(irq, NULL, NULL); 532 irq_set_chip_data(irq, NULL); 533} 534 535static const struct irq_domain_ops rtl8366rb_irqdomain_ops = { 536 .map = rtl8366rb_irq_map, 537 .unmap = rtl8366rb_irq_unmap, 538 .xlate = irq_domain_xlate_onecell, 539}; 540 541static int rtl8366rb_setup_cascaded_irq(struct realtek_priv *priv) 542{ 543 struct device_node *intc; 544 unsigned long irq_trig; 545 int irq; 546 int ret; 547 u32 val; 548 int i; 549 550 intc = of_get_child_by_name(priv->dev->of_node, "interrupt-controller"); 551 if (!intc) { 552 dev_err(priv->dev, "missing child interrupt-controller node\n"); 553 return -EINVAL; 554 } 555 /* RB8366RB IRQs cascade off this one */ 556 irq = of_irq_get(intc, 0); 557 if (irq <= 0) { 558 dev_err(priv->dev, "failed to get parent IRQ\n"); 559 ret = irq ? irq : -EINVAL; 560 goto out_put_node; 561 } 562 563 /* This clears the IRQ status register */ 564 ret = regmap_read(priv->map, RTL8366RB_INTERRUPT_STATUS_REG, 565 &val); 566 if (ret) { 567 dev_err(priv->dev, "can't read interrupt status\n"); 568 goto out_put_node; 569 } 570 571 /* Fetch IRQ edge information from the descriptor */ 572 irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq)); 573 switch (irq_trig) { 574 case IRQF_TRIGGER_RISING: 575 case IRQF_TRIGGER_HIGH: 576 dev_info(priv->dev, "active high/rising IRQ\n"); 577 val = 0; 578 break; 579 case IRQF_TRIGGER_FALLING: 580 case IRQF_TRIGGER_LOW: 581 dev_info(priv->dev, "active low/falling IRQ\n"); 582 val = RTL8366RB_INTERRUPT_POLARITY; 583 break; 584 } 585 ret = regmap_update_bits(priv->map, RTL8366RB_INTERRUPT_CONTROL_REG, 586 RTL8366RB_INTERRUPT_POLARITY, 587 val); 588 if (ret) { 589 dev_err(priv->dev, "could not configure IRQ polarity\n"); 590 goto out_put_node; 591 } 592 593 ret = devm_request_threaded_irq(priv->dev, irq, NULL, 594 rtl8366rb_irq, IRQF_ONESHOT, 595 "RTL8366RB", priv); 596 if (ret) { 597 dev_err(priv->dev, "unable to request irq: %d\n", ret); 598 goto out_put_node; 599 } 600 priv->irqdomain = irq_domain_add_linear(intc, 601 RTL8366RB_NUM_INTERRUPT, 602 &rtl8366rb_irqdomain_ops, 603 priv); 604 if (!priv->irqdomain) { 605 dev_err(priv->dev, "failed to create IRQ domain\n"); 606 ret = -EINVAL; 607 goto out_put_node; 608 } 609 for (i = 0; i < priv->num_ports; i++) 610 irq_set_parent(irq_create_mapping(priv->irqdomain, i), irq); 611 612out_put_node: 613 of_node_put(intc); 614 return ret; 615} 616 617static int rtl8366rb_set_addr(struct realtek_priv *priv) 618{ 619 u8 addr[ETH_ALEN]; 620 u16 val; 621 int ret; 622 623 eth_random_addr(addr); 624 625 dev_info(priv->dev, "set MAC: %02X:%02X:%02X:%02X:%02X:%02X\n", 626 addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]); 627 val = addr[0] << 8 | addr[1]; 628 ret = regmap_write(priv->map, RTL8366RB_SMAR0, val); 629 if (ret) 630 return ret; 631 val = addr[2] << 8 | addr[3]; 632 ret = regmap_write(priv->map, RTL8366RB_SMAR1, val); 633 if (ret) 634 return ret; 635 val = addr[4] << 8 | addr[5]; 636 ret = regmap_write(priv->map, RTL8366RB_SMAR2, val); 637 if (ret) 638 return ret; 639 640 return 0; 641} 642 643/* Found in a vendor driver */ 644 645/* Struct for handling the jam tables' entries */ 646struct rtl8366rb_jam_tbl_entry { 647 u16 reg; 648 u16 val; 649}; 650 651/* For the "version 0" early silicon, appear in most source releases */ 652static const struct rtl8366rb_jam_tbl_entry rtl8366rb_init_jam_ver_0[] = { 653 {0x000B, 0x0001}, {0x03A6, 0x0100}, {0x03A7, 0x0001}, {0x02D1, 0x3FFF}, 654 {0x02D2, 0x3FFF}, {0x02D3, 0x3FFF}, {0x02D4, 0x3FFF}, {0x02D5, 0x3FFF}, 655 {0x02D6, 0x3FFF}, {0x02D7, 0x3FFF}, {0x02D8, 0x3FFF}, {0x022B, 0x0688}, 656 {0x022C, 0x0FAC}, {0x03D0, 0x4688}, {0x03D1, 0x01F5}, {0x0000, 0x0830}, 657 {0x02F9, 0x0200}, {0x02F7, 0x7FFF}, {0x02F8, 0x03FF}, {0x0080, 0x03E8}, 658 {0x0081, 0x00CE}, {0x0082, 0x00DA}, {0x0083, 0x0230}, {0xBE0F, 0x2000}, 659 {0x0231, 0x422A}, {0x0232, 0x422A}, {0x0233, 0x422A}, {0x0234, 0x422A}, 660 {0x0235, 0x422A}, {0x0236, 0x422A}, {0x0237, 0x422A}, {0x0238, 0x422A}, 661 {0x0239, 0x422A}, {0x023A, 0x422A}, {0x023B, 0x422A}, {0x023C, 0x422A}, 662 {0x023D, 0x422A}, {0x023E, 0x422A}, {0x023F, 0x422A}, {0x0240, 0x422A}, 663 {0x0241, 0x422A}, {0x0242, 0x422A}, {0x0243, 0x422A}, {0x0244, 0x422A}, 664 {0x0245, 0x422A}, {0x0246, 0x422A}, {0x0247, 0x422A}, {0x0248, 0x422A}, 665 {0x0249, 0x0146}, {0x024A, 0x0146}, {0x024B, 0x0146}, {0xBE03, 0xC961}, 666 {0x024D, 0x0146}, {0x024E, 0x0146}, {0x024F, 0x0146}, {0x0250, 0x0146}, 667 {0xBE64, 0x0226}, {0x0252, 0x0146}, {0x0253, 0x0146}, {0x024C, 0x0146}, 668 {0x0251, 0x0146}, {0x0254, 0x0146}, {0xBE62, 0x3FD0}, {0x0084, 0x0320}, 669 {0x0255, 0x0146}, {0x0256, 0x0146}, {0x0257, 0x0146}, {0x0258, 0x0146}, 670 {0x0259, 0x0146}, {0x025A, 0x0146}, {0x025B, 0x0146}, {0x025C, 0x0146}, 671 {0x025D, 0x0146}, {0x025E, 0x0146}, {0x025F, 0x0146}, {0x0260, 0x0146}, 672 {0x0261, 0xA23F}, {0x0262, 0x0294}, {0x0263, 0xA23F}, {0x0264, 0x0294}, 673 {0x0265, 0xA23F}, {0x0266, 0x0294}, {0x0267, 0xA23F}, {0x0268, 0x0294}, 674 {0x0269, 0xA23F}, {0x026A, 0x0294}, {0x026B, 0xA23F}, {0x026C, 0x0294}, 675 {0x026D, 0xA23F}, {0x026E, 0x0294}, {0x026F, 0xA23F}, {0x0270, 0x0294}, 676 {0x02F5, 0x0048}, {0xBE09, 0x0E00}, {0xBE1E, 0x0FA0}, {0xBE14, 0x8448}, 677 {0xBE15, 0x1007}, {0xBE4A, 0xA284}, {0xC454, 0x3F0B}, {0xC474, 0x3F0B}, 678 {0xBE48, 0x3672}, {0xBE4B, 0x17A7}, {0xBE4C, 0x0B15}, {0xBE52, 0x0EDD}, 679 {0xBE49, 0x8C00}, {0xBE5B, 0x785C}, {0xBE5C, 0x785C}, {0xBE5D, 0x785C}, 680 {0xBE61, 0x368A}, {0xBE63, 0x9B84}, {0xC456, 0xCC13}, {0xC476, 0xCC13}, 681 {0xBE65, 0x307D}, {0xBE6D, 0x0005}, {0xBE6E, 0xE120}, {0xBE2E, 0x7BAF}, 682}; 683 684/* This v1 init sequence is from Belkin F5D8235 U-Boot release */ 685static const struct rtl8366rb_jam_tbl_entry rtl8366rb_init_jam_ver_1[] = { 686 {0x0000, 0x0830}, {0x0001, 0x8000}, {0x0400, 0x8130}, {0xBE78, 0x3C3C}, 687 {0x0431, 0x5432}, {0xBE37, 0x0CE4}, {0x02FA, 0xFFDF}, {0x02FB, 0xFFE0}, 688 {0xC44C, 0x1585}, {0xC44C, 0x1185}, {0xC44C, 0x1585}, {0xC46C, 0x1585}, 689 {0xC46C, 0x1185}, {0xC46C, 0x1585}, {0xC451, 0x2135}, {0xC471, 0x2135}, 690 {0xBE10, 0x8140}, {0xBE15, 0x0007}, {0xBE6E, 0xE120}, {0xBE69, 0xD20F}, 691 {0xBE6B, 0x0320}, {0xBE24, 0xB000}, {0xBE23, 0xFF51}, {0xBE22, 0xDF20}, 692 {0xBE21, 0x0140}, {0xBE20, 0x00BB}, {0xBE24, 0xB800}, {0xBE24, 0x0000}, 693 {0xBE24, 0x7000}, {0xBE23, 0xFF51}, {0xBE22, 0xDF60}, {0xBE21, 0x0140}, 694 {0xBE20, 0x0077}, {0xBE24, 0x7800}, {0xBE24, 0x0000}, {0xBE2E, 0x7B7A}, 695 {0xBE36, 0x0CE4}, {0x02F5, 0x0048}, {0xBE77, 0x2940}, {0x000A, 0x83E0}, 696 {0xBE79, 0x3C3C}, {0xBE00, 0x1340}, 697}; 698 699/* This v2 init sequence is from Belkin F5D8235 U-Boot release */ 700static const struct rtl8366rb_jam_tbl_entry rtl8366rb_init_jam_ver_2[] = { 701 {0x0450, 0x0000}, {0x0400, 0x8130}, {0x000A, 0x83ED}, {0x0431, 0x5432}, 702 {0xC44F, 0x6250}, {0xC46F, 0x6250}, {0xC456, 0x0C14}, {0xC476, 0x0C14}, 703 {0xC44C, 0x1C85}, {0xC44C, 0x1885}, {0xC44C, 0x1C85}, {0xC46C, 0x1C85}, 704 {0xC46C, 0x1885}, {0xC46C, 0x1C85}, {0xC44C, 0x0885}, {0xC44C, 0x0881}, 705 {0xC44C, 0x0885}, {0xC46C, 0x0885}, {0xC46C, 0x0881}, {0xC46C, 0x0885}, 706 {0xBE2E, 0x7BA7}, {0xBE36, 0x1000}, {0xBE37, 0x1000}, {0x8000, 0x0001}, 707 {0xBE69, 0xD50F}, {0x8000, 0x0000}, {0xBE69, 0xD50F}, {0xBE6E, 0x0320}, 708 {0xBE77, 0x2940}, {0xBE78, 0x3C3C}, {0xBE79, 0x3C3C}, {0xBE6E, 0xE120}, 709 {0x8000, 0x0001}, {0xBE15, 0x1007}, {0x8000, 0x0000}, {0xBE15, 0x1007}, 710 {0xBE14, 0x0448}, {0xBE1E, 0x00A0}, {0xBE10, 0x8160}, {0xBE10, 0x8140}, 711 {0xBE00, 0x1340}, {0x0F51, 0x0010}, 712}; 713 714/* Appears in a DDWRT code dump */ 715static const struct rtl8366rb_jam_tbl_entry rtl8366rb_init_jam_ver_3[] = { 716 {0x0000, 0x0830}, {0x0400, 0x8130}, {0x000A, 0x83ED}, {0x0431, 0x5432}, 717 {0x0F51, 0x0017}, {0x02F5, 0x0048}, {0x02FA, 0xFFDF}, {0x02FB, 0xFFE0}, 718 {0xC456, 0x0C14}, {0xC476, 0x0C14}, {0xC454, 0x3F8B}, {0xC474, 0x3F8B}, 719 {0xC450, 0x2071}, {0xC470, 0x2071}, {0xC451, 0x226B}, {0xC471, 0x226B}, 720 {0xC452, 0xA293}, {0xC472, 0xA293}, {0xC44C, 0x1585}, {0xC44C, 0x1185}, 721 {0xC44C, 0x1585}, {0xC46C, 0x1585}, {0xC46C, 0x1185}, {0xC46C, 0x1585}, 722 {0xC44C, 0x0185}, {0xC44C, 0x0181}, {0xC44C, 0x0185}, {0xC46C, 0x0185}, 723 {0xC46C, 0x0181}, {0xC46C, 0x0185}, {0xBE24, 0xB000}, {0xBE23, 0xFF51}, 724 {0xBE22, 0xDF20}, {0xBE21, 0x0140}, {0xBE20, 0x00BB}, {0xBE24, 0xB800}, 725 {0xBE24, 0x0000}, {0xBE24, 0x7000}, {0xBE23, 0xFF51}, {0xBE22, 0xDF60}, 726 {0xBE21, 0x0140}, {0xBE20, 0x0077}, {0xBE24, 0x7800}, {0xBE24, 0x0000}, 727 {0xBE2E, 0x7BA7}, {0xBE36, 0x1000}, {0xBE37, 0x1000}, {0x8000, 0x0001}, 728 {0xBE69, 0xD50F}, {0x8000, 0x0000}, {0xBE69, 0xD50F}, {0xBE6B, 0x0320}, 729 {0xBE77, 0x2800}, {0xBE78, 0x3C3C}, {0xBE79, 0x3C3C}, {0xBE6E, 0xE120}, 730 {0x8000, 0x0001}, {0xBE10, 0x8140}, {0x8000, 0x0000}, {0xBE10, 0x8140}, 731 {0xBE15, 0x1007}, {0xBE14, 0x0448}, {0xBE1E, 0x00A0}, {0xBE10, 0x8160}, 732 {0xBE10, 0x8140}, {0xBE00, 0x1340}, {0x0450, 0x0000}, {0x0401, 0x0000}, 733}; 734 735/* Belkin F5D8235 v1, "belkin,f5d8235-v1" */ 736static const struct rtl8366rb_jam_tbl_entry rtl8366rb_init_jam_f5d8235[] = { 737 {0x0242, 0x02BF}, {0x0245, 0x02BF}, {0x0248, 0x02BF}, {0x024B, 0x02BF}, 738 {0x024E, 0x02BF}, {0x0251, 0x02BF}, {0x0254, 0x0A3F}, {0x0256, 0x0A3F}, 739 {0x0258, 0x0A3F}, {0x025A, 0x0A3F}, {0x025C, 0x0A3F}, {0x025E, 0x0A3F}, 740 {0x0263, 0x007C}, {0x0100, 0x0004}, {0xBE5B, 0x3500}, {0x800E, 0x200F}, 741 {0xBE1D, 0x0F00}, {0x8001, 0x5011}, {0x800A, 0xA2F4}, {0x800B, 0x17A3}, 742 {0xBE4B, 0x17A3}, {0xBE41, 0x5011}, {0xBE17, 0x2100}, {0x8000, 0x8304}, 743 {0xBE40, 0x8304}, {0xBE4A, 0xA2F4}, {0x800C, 0xA8D5}, {0x8014, 0x5500}, 744 {0x8015, 0x0004}, {0xBE4C, 0xA8D5}, {0xBE59, 0x0008}, {0xBE09, 0x0E00}, 745 {0xBE36, 0x1036}, {0xBE37, 0x1036}, {0x800D, 0x00FF}, {0xBE4D, 0x00FF}, 746}; 747 748/* DGN3500, "netgear,dgn3500", "netgear,dgn3500b" */ 749static const struct rtl8366rb_jam_tbl_entry rtl8366rb_init_jam_dgn3500[] = { 750 {0x0000, 0x0830}, {0x0400, 0x8130}, {0x000A, 0x83ED}, {0x0F51, 0x0017}, 751 {0x02F5, 0x0048}, {0x02FA, 0xFFDF}, {0x02FB, 0xFFE0}, {0x0450, 0x0000}, 752 {0x0401, 0x0000}, {0x0431, 0x0960}, 753}; 754 755/* This jam table activates "green ethernet", which means low power mode 756 * and is claimed to detect the cable length and not use more power than 757 * necessary, and the ports should enter power saving mode 10 seconds after 758 * a cable is disconnected. Seems to always be the same. 759 */ 760static const struct rtl8366rb_jam_tbl_entry rtl8366rb_green_jam[] = { 761 {0xBE78, 0x323C}, {0xBE77, 0x5000}, {0xBE2E, 0x7BA7}, 762 {0xBE59, 0x3459}, {0xBE5A, 0x745A}, {0xBE5B, 0x785C}, 763 {0xBE5C, 0x785C}, {0xBE6E, 0xE120}, {0xBE79, 0x323C}, 764}; 765 766/* Function that jams the tables in the proper registers */ 767static int rtl8366rb_jam_table(const struct rtl8366rb_jam_tbl_entry *jam_table, 768 int jam_size, struct realtek_priv *priv, 769 bool write_dbg) 770{ 771 u32 val; 772 int ret; 773 int i; 774 775 for (i = 0; i < jam_size; i++) { 776 if ((jam_table[i].reg & 0xBE00) == 0xBE00) { 777 ret = regmap_read(priv->map, 778 RTL8366RB_PHY_ACCESS_BUSY_REG, 779 &val); 780 if (ret) 781 return ret; 782 if (!(val & RTL8366RB_PHY_INT_BUSY)) { 783 ret = regmap_write(priv->map, 784 RTL8366RB_PHY_ACCESS_CTRL_REG, 785 RTL8366RB_PHY_CTRL_WRITE); 786 if (ret) 787 return ret; 788 } 789 } 790 if (write_dbg) 791 dev_dbg(priv->dev, "jam %04x into register %04x\n", 792 jam_table[i].val, 793 jam_table[i].reg); 794 ret = regmap_write(priv->map, 795 jam_table[i].reg, 796 jam_table[i].val); 797 if (ret) 798 return ret; 799 } 800 return 0; 801} 802 803static int rtl8366rb_setup(struct dsa_switch *ds) 804{ 805 struct realtek_priv *priv = ds->priv; 806 const struct rtl8366rb_jam_tbl_entry *jam_table; 807 struct rtl8366rb *rb; 808 u32 chip_ver = 0; 809 u32 chip_id = 0; 810 int jam_size; 811 u32 val; 812 int ret; 813 int i; 814 815 rb = priv->chip_data; 816 817 ret = regmap_read(priv->map, RTL8366RB_CHIP_ID_REG, &chip_id); 818 if (ret) { 819 dev_err(priv->dev, "unable to read chip id\n"); 820 return ret; 821 } 822 823 switch (chip_id) { 824 case RTL8366RB_CHIP_ID_8366: 825 break; 826 default: 827 dev_err(priv->dev, "unknown chip id (%04x)\n", chip_id); 828 return -ENODEV; 829 } 830 831 ret = regmap_read(priv->map, RTL8366RB_CHIP_VERSION_CTRL_REG, 832 &chip_ver); 833 if (ret) { 834 dev_err(priv->dev, "unable to read chip version\n"); 835 return ret; 836 } 837 838 dev_info(priv->dev, "RTL%04x ver %u chip found\n", 839 chip_id, chip_ver & RTL8366RB_CHIP_VERSION_MASK); 840 841 /* Do the init dance using the right jam table */ 842 switch (chip_ver) { 843 case 0: 844 jam_table = rtl8366rb_init_jam_ver_0; 845 jam_size = ARRAY_SIZE(rtl8366rb_init_jam_ver_0); 846 break; 847 case 1: 848 jam_table = rtl8366rb_init_jam_ver_1; 849 jam_size = ARRAY_SIZE(rtl8366rb_init_jam_ver_1); 850 break; 851 case 2: 852 jam_table = rtl8366rb_init_jam_ver_2; 853 jam_size = ARRAY_SIZE(rtl8366rb_init_jam_ver_2); 854 break; 855 default: 856 jam_table = rtl8366rb_init_jam_ver_3; 857 jam_size = ARRAY_SIZE(rtl8366rb_init_jam_ver_3); 858 break; 859 } 860 861 /* Special jam tables for special routers 862 * TODO: are these necessary? Maintainers, please test 863 * without them, using just the off-the-shelf tables. 864 */ 865 if (of_machine_is_compatible("belkin,f5d8235-v1")) { 866 jam_table = rtl8366rb_init_jam_f5d8235; 867 jam_size = ARRAY_SIZE(rtl8366rb_init_jam_f5d8235); 868 } 869 if (of_machine_is_compatible("netgear,dgn3500") || 870 of_machine_is_compatible("netgear,dgn3500b")) { 871 jam_table = rtl8366rb_init_jam_dgn3500; 872 jam_size = ARRAY_SIZE(rtl8366rb_init_jam_dgn3500); 873 } 874 875 ret = rtl8366rb_jam_table(jam_table, jam_size, priv, true); 876 if (ret) 877 return ret; 878 879 /* Isolate all user ports so they can only send packets to itself and the CPU port */ 880 for (i = 0; i < RTL8366RB_PORT_NUM_CPU; i++) { 881 ret = regmap_write(priv->map, RTL8366RB_PORT_ISO(i), 882 RTL8366RB_PORT_ISO_PORTS(BIT(RTL8366RB_PORT_NUM_CPU)) | 883 RTL8366RB_PORT_ISO_EN); 884 if (ret) 885 return ret; 886 } 887 /* CPU port can send packets to all ports */ 888 ret = regmap_write(priv->map, RTL8366RB_PORT_ISO(RTL8366RB_PORT_NUM_CPU), 889 RTL8366RB_PORT_ISO_PORTS(dsa_user_ports(ds)) | 890 RTL8366RB_PORT_ISO_EN); 891 if (ret) 892 return ret; 893 894 /* Set up the "green ethernet" feature */ 895 ret = rtl8366rb_jam_table(rtl8366rb_green_jam, 896 ARRAY_SIZE(rtl8366rb_green_jam), priv, false); 897 if (ret) 898 return ret; 899 900 ret = regmap_write(priv->map, 901 RTL8366RB_GREEN_FEATURE_REG, 902 (chip_ver == 1) ? 0x0007 : 0x0003); 903 if (ret) 904 return ret; 905 906 /* Vendor driver sets 0x240 in registers 0xc and 0xd (undocumented) */ 907 ret = regmap_write(priv->map, 0x0c, 0x240); 908 if (ret) 909 return ret; 910 ret = regmap_write(priv->map, 0x0d, 0x240); 911 if (ret) 912 return ret; 913 914 /* Set some random MAC address */ 915 ret = rtl8366rb_set_addr(priv); 916 if (ret) 917 return ret; 918 919 /* Enable CPU port with custom DSA tag 8899. 920 * 921 * If you set RTL8368RB_CPU_NO_TAG (bit 15) in this registers 922 * the custom tag is turned off. 923 */ 924 ret = regmap_update_bits(priv->map, RTL8368RB_CPU_CTRL_REG, 925 0xFFFF, 926 BIT(priv->cpu_port)); 927 if (ret) 928 return ret; 929 930 /* Make sure we default-enable the fixed CPU port */ 931 ret = regmap_update_bits(priv->map, RTL8366RB_PECR, 932 BIT(priv->cpu_port), 933 0); 934 if (ret) 935 return ret; 936 937 /* Set maximum packet length to 1536 bytes */ 938 ret = regmap_update_bits(priv->map, RTL8366RB_SGCR, 939 RTL8366RB_SGCR_MAX_LENGTH_MASK, 940 RTL8366RB_SGCR_MAX_LENGTH_1536); 941 if (ret) 942 return ret; 943 for (i = 0; i < RTL8366RB_NUM_PORTS; i++) 944 /* layer 2 size, see rtl8366rb_change_mtu() */ 945 rb->max_mtu[i] = 1532; 946 947 /* Disable learning for all ports */ 948 ret = regmap_write(priv->map, RTL8366RB_PORT_LEARNDIS_CTRL, 949 RTL8366RB_PORT_ALL); 950 if (ret) 951 return ret; 952 953 /* Enable auto ageing for all ports */ 954 ret = regmap_write(priv->map, RTL8366RB_SECURITY_CTRL, 0); 955 if (ret) 956 return ret; 957 958 /* Port 4 setup: this enables Port 4, usually the WAN port, 959 * common PHY IO mode is apparently mode 0, and this is not what 960 * the port is initialized to. There is no explanation of the 961 * IO modes in the Realtek source code, if your WAN port is 962 * connected to something exotic such as fiber, then this might 963 * be worth experimenting with. 964 */ 965 ret = regmap_update_bits(priv->map, RTL8366RB_PMC0, 966 RTL8366RB_PMC0_P4_IOMODE_MASK, 967 0 << RTL8366RB_PMC0_P4_IOMODE_SHIFT); 968 if (ret) 969 return ret; 970 971 /* Accept all packets by default, we enable filtering on-demand */ 972 ret = regmap_write(priv->map, RTL8366RB_VLAN_INGRESS_CTRL1_REG, 973 0); 974 if (ret) 975 return ret; 976 ret = regmap_write(priv->map, RTL8366RB_VLAN_INGRESS_CTRL2_REG, 977 0); 978 if (ret) 979 return ret; 980 981 /* Don't drop packets whose DA has not been learned */ 982 ret = regmap_update_bits(priv->map, RTL8366RB_SSCR2, 983 RTL8366RB_SSCR2_DROP_UNKNOWN_DA, 0); 984 if (ret) 985 return ret; 986 987 /* Set blinking, TODO: make this configurable */ 988 ret = regmap_update_bits(priv->map, RTL8366RB_LED_BLINKRATE_REG, 989 RTL8366RB_LED_BLINKRATE_MASK, 990 RTL8366RB_LED_BLINKRATE_56MS); 991 if (ret) 992 return ret; 993 994 /* Set up LED activity: 995 * Each port has 4 LEDs, we configure all ports to the same 996 * behaviour (no individual config) but we can set up each 997 * LED separately. 998 */ 999 if (priv->leds_disabled) { 1000 /* Turn everything off */ 1001 regmap_update_bits(priv->map, 1002 RTL8366RB_LED_0_1_CTRL_REG, 1003 0x0FFF, 0); 1004 regmap_update_bits(priv->map, 1005 RTL8366RB_LED_2_3_CTRL_REG, 1006 0x0FFF, 0); 1007 regmap_update_bits(priv->map, 1008 RTL8366RB_INTERRUPT_CONTROL_REG, 1009 RTL8366RB_P4_RGMII_LED, 1010 0); 1011 val = RTL8366RB_LED_OFF; 1012 } else { 1013 /* TODO: make this configurable per LED */ 1014 val = RTL8366RB_LED_FORCE; 1015 } 1016 for (i = 0; i < 4; i++) { 1017 ret = regmap_update_bits(priv->map, 1018 RTL8366RB_LED_CTRL_REG, 1019 0xf << (i * 4), 1020 val << (i * 4)); 1021 if (ret) 1022 return ret; 1023 } 1024 1025 ret = rtl8366_reset_vlan(priv); 1026 if (ret) 1027 return ret; 1028 1029 ret = rtl8366rb_setup_cascaded_irq(priv); 1030 if (ret) 1031 dev_info(priv->dev, "no interrupt support\n"); 1032 1033 if (priv->setup_interface) { 1034 ret = priv->setup_interface(ds); 1035 if (ret) { 1036 dev_err(priv->dev, "could not set up MDIO bus\n"); 1037 return -ENODEV; 1038 } 1039 } 1040 1041 return 0; 1042} 1043 1044static enum dsa_tag_protocol rtl8366_get_tag_protocol(struct dsa_switch *ds, 1045 int port, 1046 enum dsa_tag_protocol mp) 1047{ 1048 /* This switch uses the 4 byte protocol A Realtek DSA tag */ 1049 return DSA_TAG_PROTO_RTL4_A; 1050} 1051 1052static void rtl8366rb_phylink_get_caps(struct dsa_switch *ds, int port, 1053 struct phylink_config *config) 1054{ 1055 unsigned long *interfaces = config->supported_interfaces; 1056 struct realtek_priv *priv = ds->priv; 1057 1058 if (port == priv->cpu_port) { 1059 __set_bit(PHY_INTERFACE_MODE_MII, interfaces); 1060 __set_bit(PHY_INTERFACE_MODE_GMII, interfaces); 1061 /* REVMII only supports 100M FD */ 1062 __set_bit(PHY_INTERFACE_MODE_REVMII, interfaces); 1063 /* RGMII only supports 1G FD */ 1064 phy_interface_set_rgmii(interfaces); 1065 1066 config->mac_capabilities = MAC_1000 | MAC_100 | 1067 MAC_SYM_PAUSE; 1068 } else { 1069 /* RSGMII port, but we don't have that, and we don't 1070 * specify in DT, so phylib uses the default of GMII 1071 */ 1072 __set_bit(PHY_INTERFACE_MODE_GMII, interfaces); 1073 config->mac_capabilities = MAC_1000 | MAC_100 | MAC_10 | 1074 MAC_SYM_PAUSE | MAC_ASYM_PAUSE; 1075 } 1076} 1077 1078static void 1079rtl8366rb_mac_link_up(struct dsa_switch *ds, int port, unsigned int mode, 1080 phy_interface_t interface, struct phy_device *phydev, 1081 int speed, int duplex, bool tx_pause, bool rx_pause) 1082{ 1083 struct realtek_priv *priv = ds->priv; 1084 int ret; 1085 1086 if (port != priv->cpu_port) 1087 return; 1088 1089 dev_dbg(priv->dev, "MAC link up on CPU port (%d)\n", port); 1090 1091 /* Force the fixed CPU port into 1Gbit mode, no autonegotiation */ 1092 ret = regmap_update_bits(priv->map, RTL8366RB_MAC_FORCE_CTRL_REG, 1093 BIT(port), BIT(port)); 1094 if (ret) { 1095 dev_err(priv->dev, "failed to force 1Gbit on CPU port\n"); 1096 return; 1097 } 1098 1099 ret = regmap_update_bits(priv->map, RTL8366RB_PAACR2, 1100 0xFF00U, 1101 RTL8366RB_PAACR_CPU_PORT << 8); 1102 if (ret) { 1103 dev_err(priv->dev, "failed to set PAACR on CPU port\n"); 1104 return; 1105 } 1106 1107 /* Enable the CPU port */ 1108 ret = regmap_update_bits(priv->map, RTL8366RB_PECR, BIT(port), 1109 0); 1110 if (ret) { 1111 dev_err(priv->dev, "failed to enable the CPU port\n"); 1112 return; 1113 } 1114} 1115 1116static void 1117rtl8366rb_mac_link_down(struct dsa_switch *ds, int port, unsigned int mode, 1118 phy_interface_t interface) 1119{ 1120 struct realtek_priv *priv = ds->priv; 1121 int ret; 1122 1123 if (port != priv->cpu_port) 1124 return; 1125 1126 dev_dbg(priv->dev, "MAC link down on CPU port (%d)\n", port); 1127 1128 /* Disable the CPU port */ 1129 ret = regmap_update_bits(priv->map, RTL8366RB_PECR, BIT(port), 1130 BIT(port)); 1131 if (ret) { 1132 dev_err(priv->dev, "failed to disable the CPU port\n"); 1133 return; 1134 } 1135} 1136 1137static void rb8366rb_set_port_led(struct realtek_priv *priv, 1138 int port, bool enable) 1139{ 1140 u16 val = enable ? 0x3f : 0; 1141 int ret; 1142 1143 if (priv->leds_disabled) 1144 return; 1145 1146 switch (port) { 1147 case 0: 1148 ret = regmap_update_bits(priv->map, 1149 RTL8366RB_LED_0_1_CTRL_REG, 1150 0x3F, val); 1151 break; 1152 case 1: 1153 ret = regmap_update_bits(priv->map, 1154 RTL8366RB_LED_0_1_CTRL_REG, 1155 0x3F << RTL8366RB_LED_1_OFFSET, 1156 val << RTL8366RB_LED_1_OFFSET); 1157 break; 1158 case 2: 1159 ret = regmap_update_bits(priv->map, 1160 RTL8366RB_LED_2_3_CTRL_REG, 1161 0x3F, val); 1162 break; 1163 case 3: 1164 ret = regmap_update_bits(priv->map, 1165 RTL8366RB_LED_2_3_CTRL_REG, 1166 0x3F << RTL8366RB_LED_3_OFFSET, 1167 val << RTL8366RB_LED_3_OFFSET); 1168 break; 1169 case 4: 1170 ret = regmap_update_bits(priv->map, 1171 RTL8366RB_INTERRUPT_CONTROL_REG, 1172 RTL8366RB_P4_RGMII_LED, 1173 enable ? RTL8366RB_P4_RGMII_LED : 0); 1174 break; 1175 default: 1176 dev_err(priv->dev, "no LED for port %d\n", port); 1177 return; 1178 } 1179 if (ret) 1180 dev_err(priv->dev, "error updating LED on port %d\n", port); 1181} 1182 1183static int 1184rtl8366rb_port_enable(struct dsa_switch *ds, int port, 1185 struct phy_device *phy) 1186{ 1187 struct realtek_priv *priv = ds->priv; 1188 int ret; 1189 1190 dev_dbg(priv->dev, "enable port %d\n", port); 1191 ret = regmap_update_bits(priv->map, RTL8366RB_PECR, BIT(port), 1192 0); 1193 if (ret) 1194 return ret; 1195 1196 rb8366rb_set_port_led(priv, port, true); 1197 return 0; 1198} 1199 1200static void 1201rtl8366rb_port_disable(struct dsa_switch *ds, int port) 1202{ 1203 struct realtek_priv *priv = ds->priv; 1204 int ret; 1205 1206 dev_dbg(priv->dev, "disable port %d\n", port); 1207 ret = regmap_update_bits(priv->map, RTL8366RB_PECR, BIT(port), 1208 BIT(port)); 1209 if (ret) 1210 return; 1211 1212 rb8366rb_set_port_led(priv, port, false); 1213} 1214 1215static int 1216rtl8366rb_port_bridge_join(struct dsa_switch *ds, int port, 1217 struct dsa_bridge bridge, 1218 bool *tx_fwd_offload, 1219 struct netlink_ext_ack *extack) 1220{ 1221 struct realtek_priv *priv = ds->priv; 1222 unsigned int port_bitmap = 0; 1223 int ret, i; 1224 1225 /* Loop over all other ports than the current one */ 1226 for (i = 0; i < RTL8366RB_PORT_NUM_CPU; i++) { 1227 /* Current port handled last */ 1228 if (i == port) 1229 continue; 1230 /* Not on this bridge */ 1231 if (!dsa_port_offloads_bridge(dsa_to_port(ds, i), &bridge)) 1232 continue; 1233 /* Join this port to each other port on the bridge */ 1234 ret = regmap_update_bits(priv->map, RTL8366RB_PORT_ISO(i), 1235 RTL8366RB_PORT_ISO_PORTS(BIT(port)), 1236 RTL8366RB_PORT_ISO_PORTS(BIT(port))); 1237 if (ret) 1238 dev_err(priv->dev, "failed to join port %d\n", port); 1239 1240 port_bitmap |= BIT(i); 1241 } 1242 1243 /* Set the bits for the ports we can access */ 1244 return regmap_update_bits(priv->map, RTL8366RB_PORT_ISO(port), 1245 RTL8366RB_PORT_ISO_PORTS(port_bitmap), 1246 RTL8366RB_PORT_ISO_PORTS(port_bitmap)); 1247} 1248 1249static void 1250rtl8366rb_port_bridge_leave(struct dsa_switch *ds, int port, 1251 struct dsa_bridge bridge) 1252{ 1253 struct realtek_priv *priv = ds->priv; 1254 unsigned int port_bitmap = 0; 1255 int ret, i; 1256 1257 /* Loop over all other ports than this one */ 1258 for (i = 0; i < RTL8366RB_PORT_NUM_CPU; i++) { 1259 /* Current port handled last */ 1260 if (i == port) 1261 continue; 1262 /* Not on this bridge */ 1263 if (!dsa_port_offloads_bridge(dsa_to_port(ds, i), &bridge)) 1264 continue; 1265 /* Remove this port from any other port on the bridge */ 1266 ret = regmap_update_bits(priv->map, RTL8366RB_PORT_ISO(i), 1267 RTL8366RB_PORT_ISO_PORTS(BIT(port)), 0); 1268 if (ret) 1269 dev_err(priv->dev, "failed to leave port %d\n", port); 1270 1271 port_bitmap |= BIT(i); 1272 } 1273 1274 /* Clear the bits for the ports we can not access, leave ourselves */ 1275 regmap_update_bits(priv->map, RTL8366RB_PORT_ISO(port), 1276 RTL8366RB_PORT_ISO_PORTS(port_bitmap), 0); 1277} 1278 1279/** 1280 * rtl8366rb_drop_untagged() - make the switch drop untagged and C-tagged frames 1281 * @priv: SMI state container 1282 * @port: the port to drop untagged and C-tagged frames on 1283 * @drop: whether to drop or pass untagged and C-tagged frames 1284 * 1285 * Return: zero for success, a negative number on error. 1286 */ 1287static int rtl8366rb_drop_untagged(struct realtek_priv *priv, int port, bool drop) 1288{ 1289 return regmap_update_bits(priv->map, RTL8366RB_VLAN_INGRESS_CTRL1_REG, 1290 RTL8366RB_VLAN_INGRESS_CTRL1_DROP(port), 1291 drop ? RTL8366RB_VLAN_INGRESS_CTRL1_DROP(port) : 0); 1292} 1293 1294static int rtl8366rb_vlan_filtering(struct dsa_switch *ds, int port, 1295 bool vlan_filtering, 1296 struct netlink_ext_ack *extack) 1297{ 1298 struct realtek_priv *priv = ds->priv; 1299 struct rtl8366rb *rb; 1300 int ret; 1301 1302 rb = priv->chip_data; 1303 1304 dev_dbg(priv->dev, "port %d: %s VLAN filtering\n", port, 1305 vlan_filtering ? "enable" : "disable"); 1306 1307 /* If the port is not in the member set, the frame will be dropped */ 1308 ret = regmap_update_bits(priv->map, RTL8366RB_VLAN_INGRESS_CTRL2_REG, 1309 BIT(port), vlan_filtering ? BIT(port) : 0); 1310 if (ret) 1311 return ret; 1312 1313 /* If VLAN filtering is enabled and PVID is also enabled, we must 1314 * not drop any untagged or C-tagged frames. If we turn off VLAN 1315 * filtering on a port, we need to accept any frames. 1316 */ 1317 if (vlan_filtering) 1318 ret = rtl8366rb_drop_untagged(priv, port, !rb->pvid_enabled[port]); 1319 else 1320 ret = rtl8366rb_drop_untagged(priv, port, false); 1321 1322 return ret; 1323} 1324 1325static int 1326rtl8366rb_port_pre_bridge_flags(struct dsa_switch *ds, int port, 1327 struct switchdev_brport_flags flags, 1328 struct netlink_ext_ack *extack) 1329{ 1330 /* We support enabling/disabling learning */ 1331 if (flags.mask & ~(BR_LEARNING)) 1332 return -EINVAL; 1333 1334 return 0; 1335} 1336 1337static int 1338rtl8366rb_port_bridge_flags(struct dsa_switch *ds, int port, 1339 struct switchdev_brport_flags flags, 1340 struct netlink_ext_ack *extack) 1341{ 1342 struct realtek_priv *priv = ds->priv; 1343 int ret; 1344 1345 if (flags.mask & BR_LEARNING) { 1346 ret = regmap_update_bits(priv->map, RTL8366RB_PORT_LEARNDIS_CTRL, 1347 BIT(port), 1348 (flags.val & BR_LEARNING) ? 0 : BIT(port)); 1349 if (ret) 1350 return ret; 1351 } 1352 1353 return 0; 1354} 1355 1356static void 1357rtl8366rb_port_stp_state_set(struct dsa_switch *ds, int port, u8 state) 1358{ 1359 struct realtek_priv *priv = ds->priv; 1360 u32 val; 1361 int i; 1362 1363 switch (state) { 1364 case BR_STATE_DISABLED: 1365 val = RTL8366RB_STP_STATE_DISABLED; 1366 break; 1367 case BR_STATE_BLOCKING: 1368 case BR_STATE_LISTENING: 1369 val = RTL8366RB_STP_STATE_BLOCKING; 1370 break; 1371 case BR_STATE_LEARNING: 1372 val = RTL8366RB_STP_STATE_LEARNING; 1373 break; 1374 case BR_STATE_FORWARDING: 1375 val = RTL8366RB_STP_STATE_FORWARDING; 1376 break; 1377 default: 1378 dev_err(priv->dev, "unknown bridge state requested\n"); 1379 return; 1380 } 1381 1382 /* Set the same status for the port on all the FIDs */ 1383 for (i = 0; i < RTL8366RB_NUM_FIDS; i++) { 1384 regmap_update_bits(priv->map, RTL8366RB_STP_STATE_BASE + i, 1385 RTL8366RB_STP_STATE_MASK(port), 1386 RTL8366RB_STP_STATE(port, val)); 1387 } 1388} 1389 1390static void 1391rtl8366rb_port_fast_age(struct dsa_switch *ds, int port) 1392{ 1393 struct realtek_priv *priv = ds->priv; 1394 1395 /* This will age out any learned L2 entries */ 1396 regmap_update_bits(priv->map, RTL8366RB_SECURITY_CTRL, 1397 BIT(port), BIT(port)); 1398 /* Restore the normal state of things */ 1399 regmap_update_bits(priv->map, RTL8366RB_SECURITY_CTRL, 1400 BIT(port), 0); 1401} 1402 1403static int rtl8366rb_change_mtu(struct dsa_switch *ds, int port, int new_mtu) 1404{ 1405 struct realtek_priv *priv = ds->priv; 1406 struct rtl8366rb *rb; 1407 unsigned int max_mtu; 1408 u32 len; 1409 int i; 1410 1411 /* Cache the per-port MTU setting */ 1412 rb = priv->chip_data; 1413 rb->max_mtu[port] = new_mtu; 1414 1415 /* Roof out the MTU for the entire switch to the greatest 1416 * common denominator: the biggest set for any one port will 1417 * be the biggest MTU for the switch. 1418 * 1419 * The first setting, 1522 bytes, is max IP packet 1500 bytes, 1420 * plus ethernet header, 1518 bytes, plus CPU tag, 4 bytes. 1421 * This function should consider the parameter an SDU, so the 1422 * MTU passed for this setting is 1518 bytes. The same logic 1423 * of subtracting the DSA tag of 4 bytes apply to the other 1424 * settings. 1425 */ 1426 max_mtu = 1518; 1427 for (i = 0; i < RTL8366RB_NUM_PORTS; i++) { 1428 if (rb->max_mtu[i] > max_mtu) 1429 max_mtu = rb->max_mtu[i]; 1430 } 1431 if (max_mtu <= 1518) 1432 len = RTL8366RB_SGCR_MAX_LENGTH_1522; 1433 else if (max_mtu > 1518 && max_mtu <= 1532) 1434 len = RTL8366RB_SGCR_MAX_LENGTH_1536; 1435 else if (max_mtu > 1532 && max_mtu <= 1548) 1436 len = RTL8366RB_SGCR_MAX_LENGTH_1552; 1437 else 1438 len = RTL8366RB_SGCR_MAX_LENGTH_16000; 1439 1440 return regmap_update_bits(priv->map, RTL8366RB_SGCR, 1441 RTL8366RB_SGCR_MAX_LENGTH_MASK, 1442 len); 1443} 1444 1445static int rtl8366rb_max_mtu(struct dsa_switch *ds, int port) 1446{ 1447 /* The max MTU is 16000 bytes, so we subtract the CPU tag 1448 * and the max presented to the system is 15996 bytes. 1449 */ 1450 return 15996; 1451} 1452 1453static int rtl8366rb_get_vlan_4k(struct realtek_priv *priv, u32 vid, 1454 struct rtl8366_vlan_4k *vlan4k) 1455{ 1456 u32 data[3]; 1457 int ret; 1458 int i; 1459 1460 memset(vlan4k, '\0', sizeof(struct rtl8366_vlan_4k)); 1461 1462 if (vid >= RTL8366RB_NUM_VIDS) 1463 return -EINVAL; 1464 1465 /* write VID */ 1466 ret = regmap_write(priv->map, RTL8366RB_VLAN_TABLE_WRITE_BASE, 1467 vid & RTL8366RB_VLAN_VID_MASK); 1468 if (ret) 1469 return ret; 1470 1471 /* write table access control word */ 1472 ret = regmap_write(priv->map, RTL8366RB_TABLE_ACCESS_CTRL_REG, 1473 RTL8366RB_TABLE_VLAN_READ_CTRL); 1474 if (ret) 1475 return ret; 1476 1477 for (i = 0; i < 3; i++) { 1478 ret = regmap_read(priv->map, 1479 RTL8366RB_VLAN_TABLE_READ_BASE + i, 1480 &data[i]); 1481 if (ret) 1482 return ret; 1483 } 1484 1485 vlan4k->vid = vid; 1486 vlan4k->untag = (data[1] >> RTL8366RB_VLAN_UNTAG_SHIFT) & 1487 RTL8366RB_VLAN_UNTAG_MASK; 1488 vlan4k->member = data[1] & RTL8366RB_VLAN_MEMBER_MASK; 1489 vlan4k->fid = data[2] & RTL8366RB_VLAN_FID_MASK; 1490 1491 return 0; 1492} 1493 1494static int rtl8366rb_set_vlan_4k(struct realtek_priv *priv, 1495 const struct rtl8366_vlan_4k *vlan4k) 1496{ 1497 u32 data[3]; 1498 int ret; 1499 int i; 1500 1501 if (vlan4k->vid >= RTL8366RB_NUM_VIDS || 1502 vlan4k->member > RTL8366RB_VLAN_MEMBER_MASK || 1503 vlan4k->untag > RTL8366RB_VLAN_UNTAG_MASK || 1504 vlan4k->fid > RTL8366RB_FIDMAX) 1505 return -EINVAL; 1506 1507 data[0] = vlan4k->vid & RTL8366RB_VLAN_VID_MASK; 1508 data[1] = (vlan4k->member & RTL8366RB_VLAN_MEMBER_MASK) | 1509 ((vlan4k->untag & RTL8366RB_VLAN_UNTAG_MASK) << 1510 RTL8366RB_VLAN_UNTAG_SHIFT); 1511 data[2] = vlan4k->fid & RTL8366RB_VLAN_FID_MASK; 1512 1513 for (i = 0; i < 3; i++) { 1514 ret = regmap_write(priv->map, 1515 RTL8366RB_VLAN_TABLE_WRITE_BASE + i, 1516 data[i]); 1517 if (ret) 1518 return ret; 1519 } 1520 1521 /* write table access control word */ 1522 ret = regmap_write(priv->map, RTL8366RB_TABLE_ACCESS_CTRL_REG, 1523 RTL8366RB_TABLE_VLAN_WRITE_CTRL); 1524 1525 return ret; 1526} 1527 1528static int rtl8366rb_get_vlan_mc(struct realtek_priv *priv, u32 index, 1529 struct rtl8366_vlan_mc *vlanmc) 1530{ 1531 u32 data[3]; 1532 int ret; 1533 int i; 1534 1535 memset(vlanmc, '\0', sizeof(struct rtl8366_vlan_mc)); 1536 1537 if (index >= RTL8366RB_NUM_VLANS) 1538 return -EINVAL; 1539 1540 for (i = 0; i < 3; i++) { 1541 ret = regmap_read(priv->map, 1542 RTL8366RB_VLAN_MC_BASE(index) + i, 1543 &data[i]); 1544 if (ret) 1545 return ret; 1546 } 1547 1548 vlanmc->vid = data[0] & RTL8366RB_VLAN_VID_MASK; 1549 vlanmc->priority = (data[0] >> RTL8366RB_VLAN_PRIORITY_SHIFT) & 1550 RTL8366RB_VLAN_PRIORITY_MASK; 1551 vlanmc->untag = (data[1] >> RTL8366RB_VLAN_UNTAG_SHIFT) & 1552 RTL8366RB_VLAN_UNTAG_MASK; 1553 vlanmc->member = data[1] & RTL8366RB_VLAN_MEMBER_MASK; 1554 vlanmc->fid = data[2] & RTL8366RB_VLAN_FID_MASK; 1555 1556 return 0; 1557} 1558 1559static int rtl8366rb_set_vlan_mc(struct realtek_priv *priv, u32 index, 1560 const struct rtl8366_vlan_mc *vlanmc) 1561{ 1562 u32 data[3]; 1563 int ret; 1564 int i; 1565 1566 if (index >= RTL8366RB_NUM_VLANS || 1567 vlanmc->vid >= RTL8366RB_NUM_VIDS || 1568 vlanmc->priority > RTL8366RB_PRIORITYMAX || 1569 vlanmc->member > RTL8366RB_VLAN_MEMBER_MASK || 1570 vlanmc->untag > RTL8366RB_VLAN_UNTAG_MASK || 1571 vlanmc->fid > RTL8366RB_FIDMAX) 1572 return -EINVAL; 1573 1574 data[0] = (vlanmc->vid & RTL8366RB_VLAN_VID_MASK) | 1575 ((vlanmc->priority & RTL8366RB_VLAN_PRIORITY_MASK) << 1576 RTL8366RB_VLAN_PRIORITY_SHIFT); 1577 data[1] = (vlanmc->member & RTL8366RB_VLAN_MEMBER_MASK) | 1578 ((vlanmc->untag & RTL8366RB_VLAN_UNTAG_MASK) << 1579 RTL8366RB_VLAN_UNTAG_SHIFT); 1580 data[2] = vlanmc->fid & RTL8366RB_VLAN_FID_MASK; 1581 1582 for (i = 0; i < 3; i++) { 1583 ret = regmap_write(priv->map, 1584 RTL8366RB_VLAN_MC_BASE(index) + i, 1585 data[i]); 1586 if (ret) 1587 return ret; 1588 } 1589 1590 return 0; 1591} 1592 1593static int rtl8366rb_get_mc_index(struct realtek_priv *priv, int port, int *val) 1594{ 1595 u32 data; 1596 int ret; 1597 1598 if (port >= priv->num_ports) 1599 return -EINVAL; 1600 1601 ret = regmap_read(priv->map, RTL8366RB_PORT_VLAN_CTRL_REG(port), 1602 &data); 1603 if (ret) 1604 return ret; 1605 1606 *val = (data >> RTL8366RB_PORT_VLAN_CTRL_SHIFT(port)) & 1607 RTL8366RB_PORT_VLAN_CTRL_MASK; 1608 1609 return 0; 1610} 1611 1612static int rtl8366rb_set_mc_index(struct realtek_priv *priv, int port, int index) 1613{ 1614 struct rtl8366rb *rb; 1615 bool pvid_enabled; 1616 int ret; 1617 1618 rb = priv->chip_data; 1619 pvid_enabled = !!index; 1620 1621 if (port >= priv->num_ports || index >= RTL8366RB_NUM_VLANS) 1622 return -EINVAL; 1623 1624 ret = regmap_update_bits(priv->map, RTL8366RB_PORT_VLAN_CTRL_REG(port), 1625 RTL8366RB_PORT_VLAN_CTRL_MASK << 1626 RTL8366RB_PORT_VLAN_CTRL_SHIFT(port), 1627 (index & RTL8366RB_PORT_VLAN_CTRL_MASK) << 1628 RTL8366RB_PORT_VLAN_CTRL_SHIFT(port)); 1629 if (ret) 1630 return ret; 1631 1632 rb->pvid_enabled[port] = pvid_enabled; 1633 1634 /* If VLAN filtering is enabled and PVID is also enabled, we must 1635 * not drop any untagged or C-tagged frames. Make sure to update the 1636 * filtering setting. 1637 */ 1638 if (dsa_port_is_vlan_filtering(dsa_to_port(priv->ds, port))) 1639 ret = rtl8366rb_drop_untagged(priv, port, !pvid_enabled); 1640 1641 return ret; 1642} 1643 1644static bool rtl8366rb_is_vlan_valid(struct realtek_priv *priv, unsigned int vlan) 1645{ 1646 unsigned int max = RTL8366RB_NUM_VLANS - 1; 1647 1648 if (priv->vlan4k_enabled) 1649 max = RTL8366RB_NUM_VIDS - 1; 1650 1651 if (vlan > max) 1652 return false; 1653 1654 return true; 1655} 1656 1657static int rtl8366rb_enable_vlan(struct realtek_priv *priv, bool enable) 1658{ 1659 dev_dbg(priv->dev, "%s VLAN\n", enable ? "enable" : "disable"); 1660 return regmap_update_bits(priv->map, 1661 RTL8366RB_SGCR, RTL8366RB_SGCR_EN_VLAN, 1662 enable ? RTL8366RB_SGCR_EN_VLAN : 0); 1663} 1664 1665static int rtl8366rb_enable_vlan4k(struct realtek_priv *priv, bool enable) 1666{ 1667 dev_dbg(priv->dev, "%s VLAN 4k\n", enable ? "enable" : "disable"); 1668 return regmap_update_bits(priv->map, RTL8366RB_SGCR, 1669 RTL8366RB_SGCR_EN_VLAN_4KTB, 1670 enable ? RTL8366RB_SGCR_EN_VLAN_4KTB : 0); 1671} 1672 1673static int rtl8366rb_phy_read(struct realtek_priv *priv, int phy, int regnum) 1674{ 1675 u32 val; 1676 u32 reg; 1677 int ret; 1678 1679 if (phy > RTL8366RB_PHY_NO_MAX) 1680 return -EINVAL; 1681 1682 mutex_lock(&priv->map_lock); 1683 1684 ret = regmap_write(priv->map_nolock, RTL8366RB_PHY_ACCESS_CTRL_REG, 1685 RTL8366RB_PHY_CTRL_READ); 1686 if (ret) 1687 goto out; 1688 1689 reg = 0x8000 | (1 << (phy + RTL8366RB_PHY_NO_OFFSET)) | regnum; 1690 1691 ret = regmap_write(priv->map_nolock, reg, 0); 1692 if (ret) { 1693 dev_err(priv->dev, 1694 "failed to write PHY%d reg %04x @ %04x, ret %d\n", 1695 phy, regnum, reg, ret); 1696 goto out; 1697 } 1698 1699 ret = regmap_read(priv->map_nolock, RTL8366RB_PHY_ACCESS_DATA_REG, 1700 &val); 1701 if (ret) 1702 goto out; 1703 1704 ret = val; 1705 1706 dev_dbg(priv->dev, "read PHY%d register 0x%04x @ %08x, val <- %04x\n", 1707 phy, regnum, reg, val); 1708 1709out: 1710 mutex_unlock(&priv->map_lock); 1711 1712 return ret; 1713} 1714 1715static int rtl8366rb_phy_write(struct realtek_priv *priv, int phy, int regnum, 1716 u16 val) 1717{ 1718 u32 reg; 1719 int ret; 1720 1721 if (phy > RTL8366RB_PHY_NO_MAX) 1722 return -EINVAL; 1723 1724 mutex_lock(&priv->map_lock); 1725 1726 ret = regmap_write(priv->map_nolock, RTL8366RB_PHY_ACCESS_CTRL_REG, 1727 RTL8366RB_PHY_CTRL_WRITE); 1728 if (ret) 1729 goto out; 1730 1731 reg = 0x8000 | (1 << (phy + RTL8366RB_PHY_NO_OFFSET)) | regnum; 1732 1733 dev_dbg(priv->dev, "write PHY%d register 0x%04x @ %04x, val -> %04x\n", 1734 phy, regnum, reg, val); 1735 1736 ret = regmap_write(priv->map_nolock, reg, val); 1737 if (ret) 1738 goto out; 1739 1740out: 1741 mutex_unlock(&priv->map_lock); 1742 1743 return ret; 1744} 1745 1746static int rtl8366rb_dsa_phy_read(struct dsa_switch *ds, int phy, int regnum) 1747{ 1748 return rtl8366rb_phy_read(ds->priv, phy, regnum); 1749} 1750 1751static int rtl8366rb_dsa_phy_write(struct dsa_switch *ds, int phy, int regnum, 1752 u16 val) 1753{ 1754 return rtl8366rb_phy_write(ds->priv, phy, regnum, val); 1755} 1756 1757static int rtl8366rb_reset_chip(struct realtek_priv *priv) 1758{ 1759 int timeout = 10; 1760 u32 val; 1761 int ret; 1762 1763 priv->write_reg_noack(priv, RTL8366RB_RESET_CTRL_REG, 1764 RTL8366RB_CHIP_CTRL_RESET_HW); 1765 do { 1766 usleep_range(20000, 25000); 1767 ret = regmap_read(priv->map, RTL8366RB_RESET_CTRL_REG, &val); 1768 if (ret) 1769 return ret; 1770 1771 if (!(val & RTL8366RB_CHIP_CTRL_RESET_HW)) 1772 break; 1773 } while (--timeout); 1774 1775 if (!timeout) { 1776 dev_err(priv->dev, "timeout waiting for the switch to reset\n"); 1777 return -EIO; 1778 } 1779 1780 return 0; 1781} 1782 1783static int rtl8366rb_detect(struct realtek_priv *priv) 1784{ 1785 struct device *dev = priv->dev; 1786 int ret; 1787 u32 val; 1788 1789 /* Detect device */ 1790 ret = regmap_read(priv->map, 0x5c, &val); 1791 if (ret) { 1792 dev_err(dev, "can't get chip ID (%d)\n", ret); 1793 return ret; 1794 } 1795 1796 switch (val) { 1797 case 0x6027: 1798 dev_info(dev, "found an RTL8366S switch\n"); 1799 dev_err(dev, "this switch is not yet supported, submit patches!\n"); 1800 return -ENODEV; 1801 case 0x5937: 1802 dev_info(dev, "found an RTL8366RB switch\n"); 1803 priv->cpu_port = RTL8366RB_PORT_NUM_CPU; 1804 priv->num_ports = RTL8366RB_NUM_PORTS; 1805 priv->num_vlan_mc = RTL8366RB_NUM_VLANS; 1806 priv->mib_counters = rtl8366rb_mib_counters; 1807 priv->num_mib_counters = ARRAY_SIZE(rtl8366rb_mib_counters); 1808 break; 1809 default: 1810 dev_info(dev, "found an Unknown Realtek switch (id=0x%04x)\n", 1811 val); 1812 break; 1813 } 1814 1815 ret = rtl8366rb_reset_chip(priv); 1816 if (ret) 1817 return ret; 1818 1819 return 0; 1820} 1821 1822static const struct dsa_switch_ops rtl8366rb_switch_ops_smi = { 1823 .get_tag_protocol = rtl8366_get_tag_protocol, 1824 .setup = rtl8366rb_setup, 1825 .phylink_get_caps = rtl8366rb_phylink_get_caps, 1826 .phylink_mac_link_up = rtl8366rb_mac_link_up, 1827 .phylink_mac_link_down = rtl8366rb_mac_link_down, 1828 .get_strings = rtl8366_get_strings, 1829 .get_ethtool_stats = rtl8366_get_ethtool_stats, 1830 .get_sset_count = rtl8366_get_sset_count, 1831 .port_bridge_join = rtl8366rb_port_bridge_join, 1832 .port_bridge_leave = rtl8366rb_port_bridge_leave, 1833 .port_vlan_filtering = rtl8366rb_vlan_filtering, 1834 .port_vlan_add = rtl8366_vlan_add, 1835 .port_vlan_del = rtl8366_vlan_del, 1836 .port_enable = rtl8366rb_port_enable, 1837 .port_disable = rtl8366rb_port_disable, 1838 .port_pre_bridge_flags = rtl8366rb_port_pre_bridge_flags, 1839 .port_bridge_flags = rtl8366rb_port_bridge_flags, 1840 .port_stp_state_set = rtl8366rb_port_stp_state_set, 1841 .port_fast_age = rtl8366rb_port_fast_age, 1842 .port_change_mtu = rtl8366rb_change_mtu, 1843 .port_max_mtu = rtl8366rb_max_mtu, 1844}; 1845 1846static const struct dsa_switch_ops rtl8366rb_switch_ops_mdio = { 1847 .get_tag_protocol = rtl8366_get_tag_protocol, 1848 .setup = rtl8366rb_setup, 1849 .phy_read = rtl8366rb_dsa_phy_read, 1850 .phy_write = rtl8366rb_dsa_phy_write, 1851 .phylink_get_caps = rtl8366rb_phylink_get_caps, 1852 .phylink_mac_link_up = rtl8366rb_mac_link_up, 1853 .phylink_mac_link_down = rtl8366rb_mac_link_down, 1854 .get_strings = rtl8366_get_strings, 1855 .get_ethtool_stats = rtl8366_get_ethtool_stats, 1856 .get_sset_count = rtl8366_get_sset_count, 1857 .port_bridge_join = rtl8366rb_port_bridge_join, 1858 .port_bridge_leave = rtl8366rb_port_bridge_leave, 1859 .port_vlan_filtering = rtl8366rb_vlan_filtering, 1860 .port_vlan_add = rtl8366_vlan_add, 1861 .port_vlan_del = rtl8366_vlan_del, 1862 .port_enable = rtl8366rb_port_enable, 1863 .port_disable = rtl8366rb_port_disable, 1864 .port_pre_bridge_flags = rtl8366rb_port_pre_bridge_flags, 1865 .port_bridge_flags = rtl8366rb_port_bridge_flags, 1866 .port_stp_state_set = rtl8366rb_port_stp_state_set, 1867 .port_fast_age = rtl8366rb_port_fast_age, 1868 .port_change_mtu = rtl8366rb_change_mtu, 1869 .port_max_mtu = rtl8366rb_max_mtu, 1870}; 1871 1872static const struct realtek_ops rtl8366rb_ops = { 1873 .detect = rtl8366rb_detect, 1874 .get_vlan_mc = rtl8366rb_get_vlan_mc, 1875 .set_vlan_mc = rtl8366rb_set_vlan_mc, 1876 .get_vlan_4k = rtl8366rb_get_vlan_4k, 1877 .set_vlan_4k = rtl8366rb_set_vlan_4k, 1878 .get_mc_index = rtl8366rb_get_mc_index, 1879 .set_mc_index = rtl8366rb_set_mc_index, 1880 .get_mib_counter = rtl8366rb_get_mib_counter, 1881 .is_vlan_valid = rtl8366rb_is_vlan_valid, 1882 .enable_vlan = rtl8366rb_enable_vlan, 1883 .enable_vlan4k = rtl8366rb_enable_vlan4k, 1884 .phy_read = rtl8366rb_phy_read, 1885 .phy_write = rtl8366rb_phy_write, 1886}; 1887 1888const struct realtek_variant rtl8366rb_variant = { 1889 .ds_ops_smi = &rtl8366rb_switch_ops_smi, 1890 .ds_ops_mdio = &rtl8366rb_switch_ops_mdio, 1891 .ops = &rtl8366rb_ops, 1892 .clk_delay = 10, 1893 .cmd_read = 0xa9, 1894 .cmd_write = 0xa8, 1895 .chip_data_sz = sizeof(struct rtl8366rb), 1896}; 1897EXPORT_SYMBOL_GPL(rtl8366rb_variant); 1898 1899MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>"); 1900MODULE_DESCRIPTION("Driver for RTL8366RB ethernet switch"); 1901MODULE_LICENSE("GPL"); 1902