1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Microchip KSZ9477 switch driver main logic 4 * 5 * Copyright (C) 2017-2019 Microchip Technology Inc. 6 */ 7 8#include <linux/kernel.h> 9#include <linux/module.h> 10#include <linux/iopoll.h> 11#include <linux/platform_data/microchip-ksz.h> 12#include <linux/phy.h> 13#include <linux/if_bridge.h> 14#include <linux/if_vlan.h> 15#include <net/dsa.h> 16#include <net/switchdev.h> 17 18#include "ksz9477_reg.h" 19#include "ksz_common.h" 20#include "ksz9477.h" 21 22static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set) 23{ 24 regmap_update_bits(ksz_regmap_8(dev), addr, bits, set ? bits : 0); 25} 26 27static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits, 28 bool set) 29{ 30 regmap_update_bits(ksz_regmap_8(dev), PORT_CTRL_ADDR(port, offset), 31 bits, set ? bits : 0); 32} 33 34static void ksz9477_cfg32(struct ksz_device *dev, u32 addr, u32 bits, bool set) 35{ 36 regmap_update_bits(ksz_regmap_32(dev), addr, bits, set ? bits : 0); 37} 38 39static void ksz9477_port_cfg32(struct ksz_device *dev, int port, int offset, 40 u32 bits, bool set) 41{ 42 regmap_update_bits(ksz_regmap_32(dev), PORT_CTRL_ADDR(port, offset), 43 bits, set ? bits : 0); 44} 45 46int ksz9477_change_mtu(struct ksz_device *dev, int port, int mtu) 47{ 48 u16 frame_size; 49 50 if (!dsa_is_cpu_port(dev->ds, port)) 51 return 0; 52 53 frame_size = mtu + VLAN_ETH_HLEN + ETH_FCS_LEN; 54 55 return regmap_update_bits(ksz_regmap_16(dev), REG_SW_MTU__2, 56 REG_SW_MTU_MASK, frame_size); 57} 58 59static int ksz9477_wait_vlan_ctrl_ready(struct ksz_device *dev) 60{ 61 unsigned int val; 62 63 return regmap_read_poll_timeout(ksz_regmap_8(dev), REG_SW_VLAN_CTRL, 64 val, !(val & VLAN_START), 10, 1000); 65} 66 67static int ksz9477_get_vlan_table(struct ksz_device *dev, u16 vid, 68 u32 *vlan_table) 69{ 70 int ret; 71 72 mutex_lock(&dev->vlan_mutex); 73 74 ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M); 75 ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_READ | VLAN_START); 76 77 /* wait to be cleared */ 78 ret = ksz9477_wait_vlan_ctrl_ready(dev); 79 if (ret) { 80 dev_dbg(dev->dev, "Failed to read vlan table\n"); 81 goto exit; 82 } 83 84 ksz_read32(dev, REG_SW_VLAN_ENTRY__4, &vlan_table[0]); 85 ksz_read32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, &vlan_table[1]); 86 ksz_read32(dev, REG_SW_VLAN_ENTRY_PORTS__4, &vlan_table[2]); 87 88 ksz_write8(dev, REG_SW_VLAN_CTRL, 0); 89 90exit: 91 mutex_unlock(&dev->vlan_mutex); 92 93 return ret; 94} 95 96static int ksz9477_set_vlan_table(struct ksz_device *dev, u16 vid, 97 u32 *vlan_table) 98{ 99 int ret; 100 101 mutex_lock(&dev->vlan_mutex); 102 103 ksz_write32(dev, REG_SW_VLAN_ENTRY__4, vlan_table[0]); 104 ksz_write32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, vlan_table[1]); 105 ksz_write32(dev, REG_SW_VLAN_ENTRY_PORTS__4, vlan_table[2]); 106 107 ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M); 108 ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_START | VLAN_WRITE); 109 110 /* wait to be cleared */ 111 ret = ksz9477_wait_vlan_ctrl_ready(dev); 112 if (ret) { 113 dev_dbg(dev->dev, "Failed to write vlan table\n"); 114 goto exit; 115 } 116 117 ksz_write8(dev, REG_SW_VLAN_CTRL, 0); 118 119 /* update vlan cache table */ 120 dev->vlan_cache[vid].table[0] = vlan_table[0]; 121 dev->vlan_cache[vid].table[1] = vlan_table[1]; 122 dev->vlan_cache[vid].table[2] = vlan_table[2]; 123 124exit: 125 mutex_unlock(&dev->vlan_mutex); 126 127 return ret; 128} 129 130static void ksz9477_read_table(struct ksz_device *dev, u32 *table) 131{ 132 ksz_read32(dev, REG_SW_ALU_VAL_A, &table[0]); 133 ksz_read32(dev, REG_SW_ALU_VAL_B, &table[1]); 134 ksz_read32(dev, REG_SW_ALU_VAL_C, &table[2]); 135 ksz_read32(dev, REG_SW_ALU_VAL_D, &table[3]); 136} 137 138static void ksz9477_write_table(struct ksz_device *dev, u32 *table) 139{ 140 ksz_write32(dev, REG_SW_ALU_VAL_A, table[0]); 141 ksz_write32(dev, REG_SW_ALU_VAL_B, table[1]); 142 ksz_write32(dev, REG_SW_ALU_VAL_C, table[2]); 143 ksz_write32(dev, REG_SW_ALU_VAL_D, table[3]); 144} 145 146static int ksz9477_wait_alu_ready(struct ksz_device *dev) 147{ 148 unsigned int val; 149 150 return regmap_read_poll_timeout(ksz_regmap_32(dev), REG_SW_ALU_CTRL__4, 151 val, !(val & ALU_START), 10, 1000); 152} 153 154static int ksz9477_wait_alu_sta_ready(struct ksz_device *dev) 155{ 156 unsigned int val; 157 158 return regmap_read_poll_timeout(ksz_regmap_32(dev), 159 REG_SW_ALU_STAT_CTRL__4, 160 val, !(val & ALU_STAT_START), 161 10, 1000); 162} 163 164int ksz9477_reset_switch(struct ksz_device *dev) 165{ 166 u8 data8; 167 u32 data32; 168 169 /* reset switch */ 170 ksz_cfg(dev, REG_SW_OPERATION, SW_RESET, true); 171 172 /* turn off SPI DO Edge select */ 173 regmap_update_bits(ksz_regmap_8(dev), REG_SW_GLOBAL_SERIAL_CTRL_0, 174 SPI_AUTO_EDGE_DETECTION, 0); 175 176 /* default configuration */ 177 ksz_read8(dev, REG_SW_LUE_CTRL_1, &data8); 178 data8 = SW_AGING_ENABLE | SW_LINK_AUTO_AGING | 179 SW_SRC_ADDR_FILTER | SW_FLUSH_STP_TABLE | SW_FLUSH_MSTP_TABLE; 180 ksz_write8(dev, REG_SW_LUE_CTRL_1, data8); 181 182 /* disable interrupts */ 183 ksz_write32(dev, REG_SW_INT_MASK__4, SWITCH_INT_MASK); 184 ksz_write32(dev, REG_SW_PORT_INT_MASK__4, 0x7F); 185 ksz_read32(dev, REG_SW_PORT_INT_STATUS__4, &data32); 186 187 /* KSZ9893 compatible chips do not support refclk configuration */ 188 if (dev->chip_id == KSZ9893_CHIP_ID || 189 dev->chip_id == KSZ8563_CHIP_ID || 190 dev->chip_id == KSZ9563_CHIP_ID) 191 return 0; 192 193 data8 = SW_ENABLE_REFCLKO; 194 if (dev->synclko_disable) 195 data8 = 0; 196 else if (dev->synclko_125) 197 data8 = SW_ENABLE_REFCLKO | SW_REFCLKO_IS_125MHZ; 198 ksz_write8(dev, REG_SW_GLOBAL_OUTPUT_CTRL__1, data8); 199 200 return 0; 201} 202 203void ksz9477_r_mib_cnt(struct ksz_device *dev, int port, u16 addr, u64 *cnt) 204{ 205 struct ksz_port *p = &dev->ports[port]; 206 unsigned int val; 207 u32 data; 208 int ret; 209 210 /* retain the flush/freeze bit */ 211 data = p->freeze ? MIB_COUNTER_FLUSH_FREEZE : 0; 212 data |= MIB_COUNTER_READ; 213 data |= (addr << MIB_COUNTER_INDEX_S); 214 ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, data); 215 216 ret = regmap_read_poll_timeout(ksz_regmap_32(dev), 217 PORT_CTRL_ADDR(port, REG_PORT_MIB_CTRL_STAT__4), 218 val, !(val & MIB_COUNTER_READ), 10, 1000); 219 /* failed to read MIB. get out of loop */ 220 if (ret) { 221 dev_dbg(dev->dev, "Failed to get MIB\n"); 222 return; 223 } 224 225 /* count resets upon read */ 226 ksz_pread32(dev, port, REG_PORT_MIB_DATA, &data); 227 *cnt += data; 228} 229 230void ksz9477_r_mib_pkt(struct ksz_device *dev, int port, u16 addr, 231 u64 *dropped, u64 *cnt) 232{ 233 addr = dev->info->mib_names[addr].index; 234 ksz9477_r_mib_cnt(dev, port, addr, cnt); 235} 236 237void ksz9477_freeze_mib(struct ksz_device *dev, int port, bool freeze) 238{ 239 u32 val = freeze ? MIB_COUNTER_FLUSH_FREEZE : 0; 240 struct ksz_port *p = &dev->ports[port]; 241 242 /* enable/disable the port for flush/freeze function */ 243 mutex_lock(&p->mib.cnt_mutex); 244 ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, val); 245 246 /* used by MIB counter reading code to know freeze is enabled */ 247 p->freeze = freeze; 248 mutex_unlock(&p->mib.cnt_mutex); 249} 250 251void ksz9477_port_init_cnt(struct ksz_device *dev, int port) 252{ 253 struct ksz_port_mib *mib = &dev->ports[port].mib; 254 255 /* flush all enabled port MIB counters */ 256 mutex_lock(&mib->cnt_mutex); 257 ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, 258 MIB_COUNTER_FLUSH_FREEZE); 259 ksz_write8(dev, REG_SW_MAC_CTRL_6, SW_MIB_COUNTER_FLUSH); 260 ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, 0); 261 mutex_unlock(&mib->cnt_mutex); 262} 263 264static void ksz9477_r_phy_quirks(struct ksz_device *dev, u16 addr, u16 reg, 265 u16 *data) 266{ 267 /* KSZ8563R do not have extended registers but BMSR_ESTATEN and 268 * BMSR_ERCAP bits are set. 269 */ 270 if (dev->chip_id == KSZ8563_CHIP_ID && reg == MII_BMSR) 271 *data &= ~(BMSR_ESTATEN | BMSR_ERCAP); 272} 273 274int ksz9477_r_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 *data) 275{ 276 u16 val = 0xffff; 277 int ret; 278 279 /* No real PHY after this. Simulate the PHY. 280 * A fixed PHY can be setup in the device tree, but this function is 281 * still called for that port during initialization. 282 * For RGMII PHY there is no way to access it so the fixed PHY should 283 * be used. For SGMII PHY the supporting code will be added later. 284 */ 285 if (!dev->info->internal_phy[addr]) { 286 struct ksz_port *p = &dev->ports[addr]; 287 288 switch (reg) { 289 case MII_BMCR: 290 val = 0x1140; 291 break; 292 case MII_BMSR: 293 val = 0x796d; 294 break; 295 case MII_PHYSID1: 296 val = 0x0022; 297 break; 298 case MII_PHYSID2: 299 val = 0x1631; 300 break; 301 case MII_ADVERTISE: 302 val = 0x05e1; 303 break; 304 case MII_LPA: 305 val = 0xc5e1; 306 break; 307 case MII_CTRL1000: 308 val = 0x0700; 309 break; 310 case MII_STAT1000: 311 if (p->phydev.speed == SPEED_1000) 312 val = 0x3800; 313 else 314 val = 0; 315 break; 316 } 317 } else { 318 ret = ksz_pread16(dev, addr, 0x100 + (reg << 1), &val); 319 if (ret) 320 return ret; 321 322 ksz9477_r_phy_quirks(dev, addr, reg, &val); 323 } 324 325 *data = val; 326 327 return 0; 328} 329 330int ksz9477_w_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 val) 331{ 332 u32 mask, val32; 333 334 /* No real PHY after this. */ 335 if (!dev->info->internal_phy[addr]) 336 return 0; 337 338 if (reg < 0x10) 339 return ksz_pwrite16(dev, addr, 0x100 + (reg << 1), val); 340 341 /* Errata: When using SPI, I2C, or in-band register access, 342 * writes to certain PHY registers should be performed as 343 * 32-bit writes instead of 16-bit writes. 344 */ 345 val32 = val; 346 mask = 0xffff; 347 if ((reg & 1) == 0) { 348 val32 <<= 16; 349 mask <<= 16; 350 } 351 reg &= ~1; 352 return ksz_prmw32(dev, addr, 0x100 + (reg << 1), mask, val32); 353} 354 355void ksz9477_cfg_port_member(struct ksz_device *dev, int port, u8 member) 356{ 357 ksz_pwrite32(dev, port, REG_PORT_VLAN_MEMBERSHIP__4, member); 358} 359 360void ksz9477_flush_dyn_mac_table(struct ksz_device *dev, int port) 361{ 362 const u16 *regs = dev->info->regs; 363 u8 data; 364 365 regmap_update_bits(ksz_regmap_8(dev), REG_SW_LUE_CTRL_2, 366 SW_FLUSH_OPTION_M << SW_FLUSH_OPTION_S, 367 SW_FLUSH_OPTION_DYN_MAC << SW_FLUSH_OPTION_S); 368 369 if (port < dev->info->port_cnt) { 370 /* flush individual port */ 371 ksz_pread8(dev, port, regs[P_STP_CTRL], &data); 372 if (!(data & PORT_LEARN_DISABLE)) 373 ksz_pwrite8(dev, port, regs[P_STP_CTRL], 374 data | PORT_LEARN_DISABLE); 375 ksz_cfg(dev, S_FLUSH_TABLE_CTRL, SW_FLUSH_DYN_MAC_TABLE, true); 376 ksz_pwrite8(dev, port, regs[P_STP_CTRL], data); 377 } else { 378 /* flush all */ 379 ksz_cfg(dev, S_FLUSH_TABLE_CTRL, SW_FLUSH_STP_TABLE, true); 380 } 381} 382 383int ksz9477_port_vlan_filtering(struct ksz_device *dev, int port, 384 bool flag, struct netlink_ext_ack *extack) 385{ 386 if (flag) { 387 ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL, 388 PORT_VLAN_LOOKUP_VID_0, true); 389 ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, true); 390 } else { 391 ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, false); 392 ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL, 393 PORT_VLAN_LOOKUP_VID_0, false); 394 } 395 396 return 0; 397} 398 399int ksz9477_port_vlan_add(struct ksz_device *dev, int port, 400 const struct switchdev_obj_port_vlan *vlan, 401 struct netlink_ext_ack *extack) 402{ 403 u32 vlan_table[3]; 404 bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; 405 int err; 406 407 err = ksz9477_get_vlan_table(dev, vlan->vid, vlan_table); 408 if (err) { 409 NL_SET_ERR_MSG_MOD(extack, "Failed to get vlan table"); 410 return err; 411 } 412 413 vlan_table[0] = VLAN_VALID | (vlan->vid & VLAN_FID_M); 414 if (untagged) 415 vlan_table[1] |= BIT(port); 416 else 417 vlan_table[1] &= ~BIT(port); 418 vlan_table[1] &= ~(BIT(dev->cpu_port)); 419 420 vlan_table[2] |= BIT(port) | BIT(dev->cpu_port); 421 422 err = ksz9477_set_vlan_table(dev, vlan->vid, vlan_table); 423 if (err) { 424 NL_SET_ERR_MSG_MOD(extack, "Failed to set vlan table"); 425 return err; 426 } 427 428 /* change PVID */ 429 if (vlan->flags & BRIDGE_VLAN_INFO_PVID) 430 ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, vlan->vid); 431 432 return 0; 433} 434 435int ksz9477_port_vlan_del(struct ksz_device *dev, int port, 436 const struct switchdev_obj_port_vlan *vlan) 437{ 438 bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; 439 u32 vlan_table[3]; 440 u16 pvid; 441 442 ksz_pread16(dev, port, REG_PORT_DEFAULT_VID, &pvid); 443 pvid = pvid & 0xFFF; 444 445 if (ksz9477_get_vlan_table(dev, vlan->vid, vlan_table)) { 446 dev_dbg(dev->dev, "Failed to get vlan table\n"); 447 return -ETIMEDOUT; 448 } 449 450 vlan_table[2] &= ~BIT(port); 451 452 if (pvid == vlan->vid) 453 pvid = 1; 454 455 if (untagged) 456 vlan_table[1] &= ~BIT(port); 457 458 if (ksz9477_set_vlan_table(dev, vlan->vid, vlan_table)) { 459 dev_dbg(dev->dev, "Failed to set vlan table\n"); 460 return -ETIMEDOUT; 461 } 462 463 ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, pvid); 464 465 return 0; 466} 467 468int ksz9477_fdb_add(struct ksz_device *dev, int port, 469 const unsigned char *addr, u16 vid, struct dsa_db db) 470{ 471 u32 alu_table[4]; 472 u32 data; 473 int ret = 0; 474 475 mutex_lock(&dev->alu_mutex); 476 477 /* find any entry with mac & vid */ 478 data = vid << ALU_FID_INDEX_S; 479 data |= ((addr[0] << 8) | addr[1]); 480 ksz_write32(dev, REG_SW_ALU_INDEX_0, data); 481 482 data = ((addr[2] << 24) | (addr[3] << 16)); 483 data |= ((addr[4] << 8) | addr[5]); 484 ksz_write32(dev, REG_SW_ALU_INDEX_1, data); 485 486 /* start read operation */ 487 ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START); 488 489 /* wait to be finished */ 490 ret = ksz9477_wait_alu_ready(dev); 491 if (ret) { 492 dev_dbg(dev->dev, "Failed to read ALU\n"); 493 goto exit; 494 } 495 496 /* read ALU entry */ 497 ksz9477_read_table(dev, alu_table); 498 499 /* update ALU entry */ 500 alu_table[0] = ALU_V_STATIC_VALID; 501 alu_table[1] |= BIT(port); 502 if (vid) 503 alu_table[1] |= ALU_V_USE_FID; 504 alu_table[2] = (vid << ALU_V_FID_S); 505 alu_table[2] |= ((addr[0] << 8) | addr[1]); 506 alu_table[3] = ((addr[2] << 24) | (addr[3] << 16)); 507 alu_table[3] |= ((addr[4] << 8) | addr[5]); 508 509 ksz9477_write_table(dev, alu_table); 510 511 ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START); 512 513 /* wait to be finished */ 514 ret = ksz9477_wait_alu_ready(dev); 515 if (ret) 516 dev_dbg(dev->dev, "Failed to write ALU\n"); 517 518exit: 519 mutex_unlock(&dev->alu_mutex); 520 521 return ret; 522} 523 524int ksz9477_fdb_del(struct ksz_device *dev, int port, 525 const unsigned char *addr, u16 vid, struct dsa_db db) 526{ 527 u32 alu_table[4]; 528 u32 data; 529 int ret = 0; 530 531 mutex_lock(&dev->alu_mutex); 532 533 /* read any entry with mac & vid */ 534 data = vid << ALU_FID_INDEX_S; 535 data |= ((addr[0] << 8) | addr[1]); 536 ksz_write32(dev, REG_SW_ALU_INDEX_0, data); 537 538 data = ((addr[2] << 24) | (addr[3] << 16)); 539 data |= ((addr[4] << 8) | addr[5]); 540 ksz_write32(dev, REG_SW_ALU_INDEX_1, data); 541 542 /* start read operation */ 543 ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START); 544 545 /* wait to be finished */ 546 ret = ksz9477_wait_alu_ready(dev); 547 if (ret) { 548 dev_dbg(dev->dev, "Failed to read ALU\n"); 549 goto exit; 550 } 551 552 ksz_read32(dev, REG_SW_ALU_VAL_A, &alu_table[0]); 553 if (alu_table[0] & ALU_V_STATIC_VALID) { 554 ksz_read32(dev, REG_SW_ALU_VAL_B, &alu_table[1]); 555 ksz_read32(dev, REG_SW_ALU_VAL_C, &alu_table[2]); 556 ksz_read32(dev, REG_SW_ALU_VAL_D, &alu_table[3]); 557 558 /* clear forwarding port */ 559 alu_table[1] &= ~BIT(port); 560 561 /* if there is no port to forward, clear table */ 562 if ((alu_table[1] & ALU_V_PORT_MAP) == 0) { 563 alu_table[0] = 0; 564 alu_table[1] = 0; 565 alu_table[2] = 0; 566 alu_table[3] = 0; 567 } 568 } else { 569 alu_table[0] = 0; 570 alu_table[1] = 0; 571 alu_table[2] = 0; 572 alu_table[3] = 0; 573 } 574 575 ksz9477_write_table(dev, alu_table); 576 577 ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START); 578 579 /* wait to be finished */ 580 ret = ksz9477_wait_alu_ready(dev); 581 if (ret) 582 dev_dbg(dev->dev, "Failed to write ALU\n"); 583 584exit: 585 mutex_unlock(&dev->alu_mutex); 586 587 return ret; 588} 589 590static void ksz9477_convert_alu(struct alu_struct *alu, u32 *alu_table) 591{ 592 alu->is_static = !!(alu_table[0] & ALU_V_STATIC_VALID); 593 alu->is_src_filter = !!(alu_table[0] & ALU_V_SRC_FILTER); 594 alu->is_dst_filter = !!(alu_table[0] & ALU_V_DST_FILTER); 595 alu->prio_age = (alu_table[0] >> ALU_V_PRIO_AGE_CNT_S) & 596 ALU_V_PRIO_AGE_CNT_M; 597 alu->mstp = alu_table[0] & ALU_V_MSTP_M; 598 599 alu->is_override = !!(alu_table[1] & ALU_V_OVERRIDE); 600 alu->is_use_fid = !!(alu_table[1] & ALU_V_USE_FID); 601 alu->port_forward = alu_table[1] & ALU_V_PORT_MAP; 602 603 alu->fid = (alu_table[2] >> ALU_V_FID_S) & ALU_V_FID_M; 604 605 alu->mac[0] = (alu_table[2] >> 8) & 0xFF; 606 alu->mac[1] = alu_table[2] & 0xFF; 607 alu->mac[2] = (alu_table[3] >> 24) & 0xFF; 608 alu->mac[3] = (alu_table[3] >> 16) & 0xFF; 609 alu->mac[4] = (alu_table[3] >> 8) & 0xFF; 610 alu->mac[5] = alu_table[3] & 0xFF; 611} 612 613int ksz9477_fdb_dump(struct ksz_device *dev, int port, 614 dsa_fdb_dump_cb_t *cb, void *data) 615{ 616 int ret = 0; 617 u32 ksz_data; 618 u32 alu_table[4]; 619 struct alu_struct alu; 620 int timeout; 621 622 mutex_lock(&dev->alu_mutex); 623 624 /* start ALU search */ 625 ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_START | ALU_SEARCH); 626 627 do { 628 timeout = 1000; 629 do { 630 ksz_read32(dev, REG_SW_ALU_CTRL__4, &ksz_data); 631 if ((ksz_data & ALU_VALID) || !(ksz_data & ALU_START)) 632 break; 633 usleep_range(1, 10); 634 } while (timeout-- > 0); 635 636 if (!timeout) { 637 dev_dbg(dev->dev, "Failed to search ALU\n"); 638 ret = -ETIMEDOUT; 639 goto exit; 640 } 641 642 if (!(ksz_data & ALU_VALID)) 643 continue; 644 645 /* read ALU table */ 646 ksz9477_read_table(dev, alu_table); 647 648 ksz9477_convert_alu(&alu, alu_table); 649 650 if (alu.port_forward & BIT(port)) { 651 ret = cb(alu.mac, alu.fid, alu.is_static, data); 652 if (ret) 653 goto exit; 654 } 655 } while (ksz_data & ALU_START); 656 657exit: 658 659 /* stop ALU search */ 660 ksz_write32(dev, REG_SW_ALU_CTRL__4, 0); 661 662 mutex_unlock(&dev->alu_mutex); 663 664 return ret; 665} 666 667int ksz9477_mdb_add(struct ksz_device *dev, int port, 668 const struct switchdev_obj_port_mdb *mdb, struct dsa_db db) 669{ 670 u32 static_table[4]; 671 const u8 *shifts; 672 const u32 *masks; 673 u32 data; 674 int index; 675 u32 mac_hi, mac_lo; 676 int err = 0; 677 678 shifts = dev->info->shifts; 679 masks = dev->info->masks; 680 681 mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]); 682 mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16)); 683 mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]); 684 685 mutex_lock(&dev->alu_mutex); 686 687 for (index = 0; index < dev->info->num_statics; index++) { 688 /* find empty slot first */ 689 data = (index << shifts[ALU_STAT_INDEX]) | 690 masks[ALU_STAT_READ] | ALU_STAT_START; 691 ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data); 692 693 /* wait to be finished */ 694 err = ksz9477_wait_alu_sta_ready(dev); 695 if (err) { 696 dev_dbg(dev->dev, "Failed to read ALU STATIC\n"); 697 goto exit; 698 } 699 700 /* read ALU static table */ 701 ksz9477_read_table(dev, static_table); 702 703 if (static_table[0] & ALU_V_STATIC_VALID) { 704 /* check this has same vid & mac address */ 705 if (((static_table[2] >> ALU_V_FID_S) == mdb->vid) && 706 ((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) && 707 static_table[3] == mac_lo) { 708 /* found matching one */ 709 break; 710 } 711 } else { 712 /* found empty one */ 713 break; 714 } 715 } 716 717 /* no available entry */ 718 if (index == dev->info->num_statics) { 719 err = -ENOSPC; 720 goto exit; 721 } 722 723 /* add entry */ 724 static_table[0] = ALU_V_STATIC_VALID; 725 static_table[1] |= BIT(port); 726 if (mdb->vid) 727 static_table[1] |= ALU_V_USE_FID; 728 static_table[2] = (mdb->vid << ALU_V_FID_S); 729 static_table[2] |= mac_hi; 730 static_table[3] = mac_lo; 731 732 ksz9477_write_table(dev, static_table); 733 734 data = (index << shifts[ALU_STAT_INDEX]) | ALU_STAT_START; 735 ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data); 736 737 /* wait to be finished */ 738 if (ksz9477_wait_alu_sta_ready(dev)) 739 dev_dbg(dev->dev, "Failed to read ALU STATIC\n"); 740 741exit: 742 mutex_unlock(&dev->alu_mutex); 743 return err; 744} 745 746int ksz9477_mdb_del(struct ksz_device *dev, int port, 747 const struct switchdev_obj_port_mdb *mdb, struct dsa_db db) 748{ 749 u32 static_table[4]; 750 const u8 *shifts; 751 const u32 *masks; 752 u32 data; 753 int index; 754 int ret = 0; 755 u32 mac_hi, mac_lo; 756 757 shifts = dev->info->shifts; 758 masks = dev->info->masks; 759 760 mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]); 761 mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16)); 762 mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]); 763 764 mutex_lock(&dev->alu_mutex); 765 766 for (index = 0; index < dev->info->num_statics; index++) { 767 /* find empty slot first */ 768 data = (index << shifts[ALU_STAT_INDEX]) | 769 masks[ALU_STAT_READ] | ALU_STAT_START; 770 ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data); 771 772 /* wait to be finished */ 773 ret = ksz9477_wait_alu_sta_ready(dev); 774 if (ret) { 775 dev_dbg(dev->dev, "Failed to read ALU STATIC\n"); 776 goto exit; 777 } 778 779 /* read ALU static table */ 780 ksz9477_read_table(dev, static_table); 781 782 if (static_table[0] & ALU_V_STATIC_VALID) { 783 /* check this has same vid & mac address */ 784 785 if (((static_table[2] >> ALU_V_FID_S) == mdb->vid) && 786 ((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) && 787 static_table[3] == mac_lo) { 788 /* found matching one */ 789 break; 790 } 791 } 792 } 793 794 /* no available entry */ 795 if (index == dev->info->num_statics) 796 goto exit; 797 798 /* clear port */ 799 static_table[1] &= ~BIT(port); 800 801 if ((static_table[1] & ALU_V_PORT_MAP) == 0) { 802 /* delete entry */ 803 static_table[0] = 0; 804 static_table[1] = 0; 805 static_table[2] = 0; 806 static_table[3] = 0; 807 } 808 809 ksz9477_write_table(dev, static_table); 810 811 data = (index << shifts[ALU_STAT_INDEX]) | ALU_STAT_START; 812 ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data); 813 814 /* wait to be finished */ 815 ret = ksz9477_wait_alu_sta_ready(dev); 816 if (ret) 817 dev_dbg(dev->dev, "Failed to read ALU STATIC\n"); 818 819exit: 820 mutex_unlock(&dev->alu_mutex); 821 822 return ret; 823} 824 825int ksz9477_port_mirror_add(struct ksz_device *dev, int port, 826 struct dsa_mall_mirror_tc_entry *mirror, 827 bool ingress, struct netlink_ext_ack *extack) 828{ 829 u8 data; 830 int p; 831 832 /* Limit to one sniffer port 833 * Check if any of the port is already set for sniffing 834 * If yes, instruct the user to remove the previous entry & exit 835 */ 836 for (p = 0; p < dev->info->port_cnt; p++) { 837 /* Skip the current sniffing port */ 838 if (p == mirror->to_local_port) 839 continue; 840 841 ksz_pread8(dev, p, P_MIRROR_CTRL, &data); 842 843 if (data & PORT_MIRROR_SNIFFER) { 844 NL_SET_ERR_MSG_MOD(extack, 845 "Sniffer port is already configured, delete existing rules & retry"); 846 return -EBUSY; 847 } 848 } 849 850 if (ingress) 851 ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, true); 852 else 853 ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, true); 854 855 /* configure mirror port */ 856 ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL, 857 PORT_MIRROR_SNIFFER, true); 858 859 ksz_cfg(dev, S_MIRROR_CTRL, SW_MIRROR_RX_TX, false); 860 861 return 0; 862} 863 864void ksz9477_port_mirror_del(struct ksz_device *dev, int port, 865 struct dsa_mall_mirror_tc_entry *mirror) 866{ 867 bool in_use = false; 868 u8 data; 869 int p; 870 871 if (mirror->ingress) 872 ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, false); 873 else 874 ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, false); 875 876 877 /* Check if any of the port is still referring to sniffer port */ 878 for (p = 0; p < dev->info->port_cnt; p++) { 879 ksz_pread8(dev, p, P_MIRROR_CTRL, &data); 880 881 if ((data & (PORT_MIRROR_RX | PORT_MIRROR_TX))) { 882 in_use = true; 883 break; 884 } 885 } 886 887 /* delete sniffing if there are no other mirroring rules */ 888 if (!in_use) 889 ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL, 890 PORT_MIRROR_SNIFFER, false); 891} 892 893static phy_interface_t ksz9477_get_interface(struct ksz_device *dev, int port) 894{ 895 phy_interface_t interface; 896 bool gbit; 897 898 if (dev->info->internal_phy[port]) 899 return PHY_INTERFACE_MODE_NA; 900 901 gbit = ksz_get_gbit(dev, port); 902 903 interface = ksz_get_xmii(dev, port, gbit); 904 905 return interface; 906} 907 908void ksz9477_get_caps(struct ksz_device *dev, int port, 909 struct phylink_config *config) 910{ 911 config->mac_capabilities = MAC_10 | MAC_100 | MAC_ASYM_PAUSE | 912 MAC_SYM_PAUSE; 913 914 if (dev->info->gbit_capable[port]) 915 config->mac_capabilities |= MAC_1000FD; 916} 917 918int ksz9477_set_ageing_time(struct ksz_device *dev, unsigned int msecs) 919{ 920 u32 secs = msecs / 1000; 921 u8 value; 922 u8 data; 923 int ret; 924 925 value = FIELD_GET(SW_AGE_PERIOD_7_0_M, secs); 926 927 ret = ksz_write8(dev, REG_SW_LUE_CTRL_3, value); 928 if (ret < 0) 929 return ret; 930 931 data = FIELD_GET(SW_AGE_PERIOD_10_8_M, secs); 932 933 ret = ksz_read8(dev, REG_SW_LUE_CTRL_0, &value); 934 if (ret < 0) 935 return ret; 936 937 value &= ~SW_AGE_CNT_M; 938 value |= FIELD_PREP(SW_AGE_CNT_M, data); 939 940 return ksz_write8(dev, REG_SW_LUE_CTRL_0, value); 941} 942 943void ksz9477_port_queue_split(struct ksz_device *dev, int port) 944{ 945 u8 data; 946 947 if (dev->info->num_tx_queues == 8) 948 data = PORT_EIGHT_QUEUE; 949 else if (dev->info->num_tx_queues == 4) 950 data = PORT_FOUR_QUEUE; 951 else if (dev->info->num_tx_queues == 2) 952 data = PORT_TWO_QUEUE; 953 else 954 data = PORT_SINGLE_QUEUE; 955 956 ksz_prmw8(dev, port, REG_PORT_CTRL_0, PORT_QUEUE_SPLIT_MASK, data); 957} 958 959void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port) 960{ 961 struct dsa_switch *ds = dev->ds; 962 u16 data16; 963 u8 member; 964 965 /* enable tag tail for host port */ 966 if (cpu_port) 967 ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_TAIL_TAG_ENABLE, 968 true); 969 970 ksz9477_port_queue_split(dev, port); 971 972 ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_MAC_LOOPBACK, false); 973 974 /* set back pressure */ 975 ksz_port_cfg(dev, port, REG_PORT_MAC_CTRL_1, PORT_BACK_PRESSURE, true); 976 977 /* enable broadcast storm limit */ 978 ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true); 979 980 /* disable DiffServ priority */ 981 ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_PRIO_ENABLE, false); 982 983 /* replace priority */ 984 ksz_port_cfg(dev, port, REG_PORT_MRI_MAC_CTRL, PORT_USER_PRIO_CEILING, 985 false); 986 ksz9477_port_cfg32(dev, port, REG_PORT_MTI_QUEUE_CTRL_0__4, 987 MTI_PVID_REPLACE, false); 988 989 /* enable 802.1p priority */ 990 ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_PRIO_ENABLE, true); 991 992 /* force flow control for non-PHY ports only */ 993 ksz_port_cfg(dev, port, REG_PORT_CTRL_0, 994 PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL, 995 !dev->info->internal_phy[port]); 996 997 if (cpu_port) 998 member = dsa_user_ports(ds); 999 else 1000 member = BIT(dsa_upstream_port(ds, port)); 1001 1002 ksz9477_cfg_port_member(dev, port, member); 1003 1004 /* clear pending interrupts */ 1005 if (dev->info->internal_phy[port]) 1006 ksz_pread16(dev, port, REG_PORT_PHY_INT_ENABLE, &data16); 1007} 1008 1009void ksz9477_config_cpu_port(struct dsa_switch *ds) 1010{ 1011 struct ksz_device *dev = ds->priv; 1012 struct ksz_port *p; 1013 int i; 1014 1015 for (i = 0; i < dev->info->port_cnt; i++) { 1016 if (dsa_is_cpu_port(ds, i) && 1017 (dev->info->cpu_ports & (1 << i))) { 1018 phy_interface_t interface; 1019 const char *prev_msg; 1020 const char *prev_mode; 1021 1022 dev->cpu_port = i; 1023 p = &dev->ports[i]; 1024 1025 /* Read from XMII register to determine host port 1026 * interface. If set specifically in device tree 1027 * note the difference to help debugging. 1028 */ 1029 interface = ksz9477_get_interface(dev, i); 1030 if (!p->interface) { 1031 if (dev->compat_interface) { 1032 dev_warn(dev->dev, 1033 "Using legacy switch \"phy-mode\" property, because it is missing on port %d node. " 1034 "Please update your device tree.\n", 1035 i); 1036 p->interface = dev->compat_interface; 1037 } else { 1038 p->interface = interface; 1039 } 1040 } 1041 if (interface && interface != p->interface) { 1042 prev_msg = " instead of "; 1043 prev_mode = phy_modes(interface); 1044 } else { 1045 prev_msg = ""; 1046 prev_mode = ""; 1047 } 1048 dev_info(dev->dev, 1049 "Port%d: using phy mode %s%s%s\n", 1050 i, 1051 phy_modes(p->interface), 1052 prev_msg, 1053 prev_mode); 1054 1055 /* enable cpu port */ 1056 ksz9477_port_setup(dev, i, true); 1057 } 1058 } 1059 1060 for (i = 0; i < dev->info->port_cnt; i++) { 1061 if (i == dev->cpu_port) 1062 continue; 1063 ksz_port_stp_state_set(ds, i, BR_STATE_DISABLED); 1064 } 1065} 1066 1067int ksz9477_enable_stp_addr(struct ksz_device *dev) 1068{ 1069 const u32 *masks; 1070 u32 data; 1071 int ret; 1072 1073 masks = dev->info->masks; 1074 1075 /* Enable Reserved multicast table */ 1076 ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_RESV_MCAST_ENABLE, true); 1077 1078 /* Set the Override bit for forwarding BPDU packet to CPU */ 1079 ret = ksz_write32(dev, REG_SW_ALU_VAL_B, 1080 ALU_V_OVERRIDE | BIT(dev->cpu_port)); 1081 if (ret < 0) 1082 return ret; 1083 1084 data = ALU_STAT_START | ALU_RESV_MCAST_ADDR | masks[ALU_STAT_WRITE]; 1085 1086 ret = ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data); 1087 if (ret < 0) 1088 return ret; 1089 1090 /* wait to be finished */ 1091 ret = ksz9477_wait_alu_sta_ready(dev); 1092 if (ret < 0) { 1093 dev_err(dev->dev, "Failed to update Reserved Multicast table\n"); 1094 return ret; 1095 } 1096 1097 return 0; 1098} 1099 1100int ksz9477_setup(struct dsa_switch *ds) 1101{ 1102 struct ksz_device *dev = ds->priv; 1103 int ret = 0; 1104 1105 ds->mtu_enforcement_ingress = true; 1106 1107 /* Required for port partitioning. */ 1108 ksz9477_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY, 1109 true); 1110 1111 /* Do not work correctly with tail tagging. */ 1112 ksz_cfg(dev, REG_SW_MAC_CTRL_0, SW_CHECK_LENGTH, false); 1113 1114 /* Enable REG_SW_MTU__2 reg by setting SW_JUMBO_PACKET */ 1115 ksz_cfg(dev, REG_SW_MAC_CTRL_1, SW_JUMBO_PACKET, true); 1116 1117 /* Now we can configure default MTU value */ 1118 ret = regmap_update_bits(ksz_regmap_16(dev), REG_SW_MTU__2, REG_SW_MTU_MASK, 1119 VLAN_ETH_FRAME_LEN + ETH_FCS_LEN); 1120 if (ret) 1121 return ret; 1122 1123 /* queue based egress rate limit */ 1124 ksz_cfg(dev, REG_SW_MAC_CTRL_5, SW_OUT_RATE_LIMIT_QUEUE_BASED, true); 1125 1126 /* enable global MIB counter freeze function */ 1127 ksz_cfg(dev, REG_SW_MAC_CTRL_6, SW_MIB_COUNTER_FREEZE, true); 1128 1129 return 0; 1130} 1131 1132u32 ksz9477_get_port_addr(int port, int offset) 1133{ 1134 return PORT_CTRL_ADDR(port, offset); 1135} 1136 1137int ksz9477_tc_cbs_set_cinc(struct ksz_device *dev, int port, u32 val) 1138{ 1139 val = val >> 8; 1140 1141 return ksz_pwrite16(dev, port, REG_PORT_MTI_CREDIT_INCREMENT, val); 1142} 1143 1144int ksz9477_switch_init(struct ksz_device *dev) 1145{ 1146 u8 data8; 1147 int ret; 1148 1149 dev->port_mask = (1 << dev->info->port_cnt) - 1; 1150 1151 /* turn off SPI DO Edge select */ 1152 ret = ksz_read8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, &data8); 1153 if (ret) 1154 return ret; 1155 1156 data8 &= ~SPI_AUTO_EDGE_DETECTION; 1157 ret = ksz_write8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, data8); 1158 if (ret) 1159 return ret; 1160 1161 return 0; 1162} 1163 1164void ksz9477_switch_exit(struct ksz_device *dev) 1165{ 1166 ksz9477_reset_switch(dev); 1167} 1168 1169MODULE_AUTHOR("Woojung Huh <Woojung.Huh@microchip.com>"); 1170MODULE_DESCRIPTION("Microchip KSZ9477 Series Switch DSA Driver"); 1171MODULE_LICENSE("GPL"); 1172