1/* SPDX-License-Identifier: GPL-2.0-or-later */ 2/* 3 * linux/drivers/mmc/host/sdhci.h - Secure Digital Host Controller Interface driver 4 * 5 * Header file for Host Controller registers and I/O accessors. 6 * 7 * Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved. 8 */ 9#ifndef __SDHCI_HW_H 10#define __SDHCI_HW_H 11 12#include <linux/bits.h> 13#include <linux/scatterlist.h> 14#include <linux/compiler.h> 15#include <linux/types.h> 16#include <linux/io.h> 17#include <linux/leds.h> 18#include <linux/interrupt.h> 19 20#include <linux/mmc/host.h> 21 22/* 23 * Controller registers 24 */ 25 26#define SDHCI_DMA_ADDRESS 0x00 27#define SDHCI_ARGUMENT2 SDHCI_DMA_ADDRESS 28#define SDHCI_32BIT_BLK_CNT SDHCI_DMA_ADDRESS 29 30#define SDHCI_BLOCK_SIZE 0x04 31#define SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF)) 32 33#define SDHCI_BLOCK_COUNT 0x06 34 35#define SDHCI_ARGUMENT 0x08 36 37#define SDHCI_TRANSFER_MODE 0x0C 38#define SDHCI_TRNS_DMA 0x01 39#define SDHCI_TRNS_BLK_CNT_EN 0x02 40#define SDHCI_TRNS_AUTO_CMD12 0x04 41#define SDHCI_TRNS_AUTO_CMD23 0x08 42#define SDHCI_TRNS_AUTO_SEL 0x0C 43#define SDHCI_TRNS_READ 0x10 44#define SDHCI_TRNS_MULTI 0x20 45 46#define SDHCI_COMMAND 0x0E 47#define SDHCI_CMD_RESP_MASK 0x03 48#define SDHCI_CMD_CRC 0x08 49#define SDHCI_CMD_INDEX 0x10 50#define SDHCI_CMD_DATA 0x20 51#define SDHCI_CMD_ABORTCMD 0xC0 52 53#define SDHCI_CMD_RESP_NONE 0x00 54#define SDHCI_CMD_RESP_LONG 0x01 55#define SDHCI_CMD_RESP_SHORT 0x02 56#define SDHCI_CMD_RESP_SHORT_BUSY 0x03 57 58#define SDHCI_MAKE_CMD(c, f) (((c & 0xff) << 8) | (f & 0xff)) 59#define SDHCI_GET_CMD(c) ((c>>8) & 0x3f) 60 61#define SDHCI_RESPONSE 0x10 62 63#define SDHCI_BUFFER 0x20 64 65#define SDHCI_PRESENT_STATE 0x24 66#define SDHCI_CMD_INHIBIT 0x00000001 67#define SDHCI_DATA_INHIBIT 0x00000002 68#define SDHCI_DOING_WRITE 0x00000100 69#define SDHCI_DOING_READ 0x00000200 70#define SDHCI_SPACE_AVAILABLE 0x00000400 71#define SDHCI_DATA_AVAILABLE 0x00000800 72#define SDHCI_CARD_PRESENT 0x00010000 73#define SDHCI_CARD_PRES_SHIFT 16 74#define SDHCI_CD_STABLE 0x00020000 75#define SDHCI_CD_LVL 0x00040000 76#define SDHCI_CD_LVL_SHIFT 18 77#define SDHCI_WRITE_PROTECT 0x00080000 78#define SDHCI_DATA_LVL_MASK 0x00F00000 79#define SDHCI_DATA_LVL_SHIFT 20 80#define SDHCI_DATA_0_LVL_MASK 0x00100000 81#define SDHCI_CMD_LVL 0x01000000 82 83#define SDHCI_HOST_CONTROL 0x28 84#define SDHCI_CTRL_LED 0x01 85#define SDHCI_CTRL_4BITBUS 0x02 86#define SDHCI_CTRL_HISPD 0x04 87#define SDHCI_CTRL_DMA_MASK 0x18 88#define SDHCI_CTRL_SDMA 0x00 89#define SDHCI_CTRL_ADMA1 0x08 90#define SDHCI_CTRL_ADMA32 0x10 91#define SDHCI_CTRL_ADMA64 0x18 92#define SDHCI_CTRL_ADMA3 0x18 93#define SDHCI_CTRL_8BITBUS 0x20 94#define SDHCI_CTRL_CDTEST_INS 0x40 95#define SDHCI_CTRL_CDTEST_EN 0x80 96 97#define SDHCI_POWER_CONTROL 0x29 98#define SDHCI_POWER_ON 0x01 99#define SDHCI_POWER_180 0x0A 100#define SDHCI_POWER_300 0x0C 101#define SDHCI_POWER_330 0x0E 102/* 103 * VDD2 - UHS2 or PCIe/NVMe 104 * VDD2 power on/off and voltage select 105 */ 106#define SDHCI_VDD2_POWER_ON 0x10 107#define SDHCI_VDD2_POWER_120 0x80 108#define SDHCI_VDD2_POWER_180 0xA0 109 110#define SDHCI_BLOCK_GAP_CONTROL 0x2A 111 112#define SDHCI_WAKE_UP_CONTROL 0x2B 113#define SDHCI_WAKE_ON_INT 0x01 114#define SDHCI_WAKE_ON_INSERT 0x02 115#define SDHCI_WAKE_ON_REMOVE 0x04 116 117#define SDHCI_CLOCK_CONTROL 0x2C 118#define SDHCI_DIVIDER_SHIFT 8 119#define SDHCI_DIVIDER_HI_SHIFT 6 120#define SDHCI_DIV_MASK 0xFF 121#define SDHCI_DIV_MASK_LEN 8 122#define SDHCI_DIV_HI_MASK 0x300 123#define SDHCI_PROG_CLOCK_MODE 0x0020 124#define SDHCI_CLOCK_CARD_EN 0x0004 125#define SDHCI_CLOCK_PLL_EN 0x0008 126#define SDHCI_CLOCK_INT_STABLE 0x0002 127#define SDHCI_CLOCK_INT_EN 0x0001 128 129#define SDHCI_TIMEOUT_CONTROL 0x2E 130 131#define SDHCI_SOFTWARE_RESET 0x2F 132#define SDHCI_RESET_ALL 0x01 133#define SDHCI_RESET_CMD 0x02 134#define SDHCI_RESET_DATA 0x04 135 136#define SDHCI_INT_STATUS 0x30 137#define SDHCI_INT_ENABLE 0x34 138#define SDHCI_SIGNAL_ENABLE 0x38 139#define SDHCI_INT_RESPONSE 0x00000001 140#define SDHCI_INT_DATA_END 0x00000002 141#define SDHCI_INT_BLK_GAP 0x00000004 142#define SDHCI_INT_DMA_END 0x00000008 143#define SDHCI_INT_SPACE_AVAIL 0x00000010 144#define SDHCI_INT_DATA_AVAIL 0x00000020 145#define SDHCI_INT_CARD_INSERT 0x00000040 146#define SDHCI_INT_CARD_REMOVE 0x00000080 147#define SDHCI_INT_CARD_INT 0x00000100 148#define SDHCI_INT_RETUNE 0x00001000 149#define SDHCI_INT_CQE 0x00004000 150#define SDHCI_INT_ERROR 0x00008000 151#define SDHCI_INT_TIMEOUT 0x00010000 152#define SDHCI_INT_CRC 0x00020000 153#define SDHCI_INT_END_BIT 0x00040000 154#define SDHCI_INT_INDEX 0x00080000 155#define SDHCI_INT_DATA_TIMEOUT 0x00100000 156#define SDHCI_INT_DATA_CRC 0x00200000 157#define SDHCI_INT_DATA_END_BIT 0x00400000 158#define SDHCI_INT_BUS_POWER 0x00800000 159#define SDHCI_INT_AUTO_CMD_ERR 0x01000000 160#define SDHCI_INT_ADMA_ERROR 0x02000000 161 162#define SDHCI_INT_NORMAL_MASK 0x00007FFF 163#define SDHCI_INT_ERROR_MASK 0xFFFF8000 164 165#define SDHCI_INT_CMD_MASK (SDHCI_INT_RESPONSE | SDHCI_INT_TIMEOUT | \ 166 SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX | \ 167 SDHCI_INT_AUTO_CMD_ERR) 168#define SDHCI_INT_DATA_MASK (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \ 169 SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \ 170 SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \ 171 SDHCI_INT_DATA_END_BIT | SDHCI_INT_ADMA_ERROR | \ 172 SDHCI_INT_BLK_GAP) 173#define SDHCI_INT_ALL_MASK ((unsigned int)-1) 174 175#define SDHCI_CQE_INT_ERR_MASK ( \ 176 SDHCI_INT_ADMA_ERROR | SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT | \ 177 SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_INDEX | \ 178 SDHCI_INT_END_BIT | SDHCI_INT_CRC | SDHCI_INT_TIMEOUT) 179 180#define SDHCI_CQE_INT_MASK (SDHCI_CQE_INT_ERR_MASK | SDHCI_INT_CQE) 181 182#define SDHCI_AUTO_CMD_STATUS 0x3C 183#define SDHCI_AUTO_CMD_TIMEOUT 0x00000002 184#define SDHCI_AUTO_CMD_CRC 0x00000004 185#define SDHCI_AUTO_CMD_END_BIT 0x00000008 186#define SDHCI_AUTO_CMD_INDEX 0x00000010 187 188#define SDHCI_HOST_CONTROL2 0x3E 189#define SDHCI_CTRL_UHS_MASK 0x0007 190#define SDHCI_CTRL_UHS_SDR12 0x0000 191#define SDHCI_CTRL_UHS_SDR25 0x0001 192#define SDHCI_CTRL_UHS_SDR50 0x0002 193#define SDHCI_CTRL_UHS_SDR104 0x0003 194#define SDHCI_CTRL_UHS_DDR50 0x0004 195#define SDHCI_CTRL_HS400 0x0005 /* Non-standard */ 196#define SDHCI_CTRL_VDD_180 0x0008 197#define SDHCI_CTRL_DRV_TYPE_MASK 0x0030 198#define SDHCI_CTRL_DRV_TYPE_B 0x0000 199#define SDHCI_CTRL_DRV_TYPE_A 0x0010 200#define SDHCI_CTRL_DRV_TYPE_C 0x0020 201#define SDHCI_CTRL_DRV_TYPE_D 0x0030 202#define SDHCI_CTRL_EXEC_TUNING 0x0040 203#define SDHCI_CTRL_TUNED_CLK 0x0080 204#define SDHCI_CMD23_ENABLE 0x0800 205#define SDHCI_CTRL_V4_MODE 0x1000 206#define SDHCI_CTRL_64BIT_ADDR 0x2000 207#define SDHCI_CTRL_PRESET_VAL_ENABLE 0x8000 208 209#define SDHCI_CAPABILITIES 0x40 210#define SDHCI_TIMEOUT_CLK_MASK GENMASK(5, 0) 211#define SDHCI_TIMEOUT_CLK_SHIFT 0 212#define SDHCI_TIMEOUT_CLK_UNIT 0x00000080 213#define SDHCI_CLOCK_BASE_MASK GENMASK(13, 8) 214#define SDHCI_CLOCK_BASE_SHIFT 8 215#define SDHCI_CLOCK_V3_BASE_MASK GENMASK(15, 8) 216#define SDHCI_MAX_BLOCK_MASK 0x00030000 217#define SDHCI_MAX_BLOCK_SHIFT 16 218#define SDHCI_CAN_DO_8BIT 0x00040000 219#define SDHCI_CAN_DO_ADMA2 0x00080000 220#define SDHCI_CAN_DO_ADMA1 0x00100000 221#define SDHCI_CAN_DO_HISPD 0x00200000 222#define SDHCI_CAN_DO_SDMA 0x00400000 223#define SDHCI_CAN_DO_SUSPEND 0x00800000 224#define SDHCI_CAN_VDD_330 0x01000000 225#define SDHCI_CAN_VDD_300 0x02000000 226#define SDHCI_CAN_VDD_180 0x04000000 227#define SDHCI_CAN_64BIT_V4 0x08000000 228#define SDHCI_CAN_64BIT 0x10000000 229 230#define SDHCI_CAPABILITIES_1 0x44 231#define SDHCI_SUPPORT_SDR50 0x00000001 232#define SDHCI_SUPPORT_SDR104 0x00000002 233#define SDHCI_SUPPORT_DDR50 0x00000004 234#define SDHCI_DRIVER_TYPE_A 0x00000010 235#define SDHCI_DRIVER_TYPE_C 0x00000020 236#define SDHCI_DRIVER_TYPE_D 0x00000040 237#define SDHCI_RETUNING_TIMER_COUNT_MASK GENMASK(11, 8) 238#define SDHCI_USE_SDR50_TUNING 0x00002000 239#define SDHCI_RETUNING_MODE_MASK GENMASK(15, 14) 240#define SDHCI_CLOCK_MUL_MASK GENMASK(23, 16) 241#define SDHCI_CAN_DO_ADMA3 0x08000000 242#define SDHCI_SUPPORT_HS400 0x80000000 /* Non-standard */ 243 244#define SDHCI_MAX_CURRENT 0x48 245#define SDHCI_MAX_CURRENT_LIMIT GENMASK(7, 0) 246#define SDHCI_MAX_CURRENT_330_MASK GENMASK(7, 0) 247#define SDHCI_MAX_CURRENT_300_MASK GENMASK(15, 8) 248#define SDHCI_MAX_CURRENT_180_MASK GENMASK(23, 16) 249#define SDHCI_MAX_CURRENT_MULTIPLIER 4 250 251/* 4C-4F reserved for more max current */ 252 253#define SDHCI_SET_ACMD12_ERROR 0x50 254#define SDHCI_SET_INT_ERROR 0x52 255 256#define SDHCI_ADMA_ERROR 0x54 257 258/* 55-57 reserved */ 259 260#define SDHCI_ADMA_ADDRESS 0x58 261#define SDHCI_ADMA_ADDRESS_HI 0x5C 262 263/* 60-FB reserved */ 264 265#define SDHCI_PRESET_FOR_HIGH_SPEED 0x64 266#define SDHCI_PRESET_FOR_SDR12 0x66 267#define SDHCI_PRESET_FOR_SDR25 0x68 268#define SDHCI_PRESET_FOR_SDR50 0x6A 269#define SDHCI_PRESET_FOR_SDR104 0x6C 270#define SDHCI_PRESET_FOR_DDR50 0x6E 271#define SDHCI_PRESET_FOR_HS400 0x74 /* Non-standard */ 272#define SDHCI_PRESET_DRV_MASK GENMASK(15, 14) 273#define SDHCI_PRESET_CLKGEN_SEL BIT(10) 274#define SDHCI_PRESET_SDCLK_FREQ_MASK GENMASK(9, 0) 275 276#define SDHCI_SLOT_INT_STATUS 0xFC 277 278#define SDHCI_HOST_VERSION 0xFE 279#define SDHCI_VENDOR_VER_MASK 0xFF00 280#define SDHCI_VENDOR_VER_SHIFT 8 281#define SDHCI_SPEC_VER_MASK 0x00FF 282#define SDHCI_SPEC_VER_SHIFT 0 283#define SDHCI_SPEC_100 0 284#define SDHCI_SPEC_200 1 285#define SDHCI_SPEC_300 2 286#define SDHCI_SPEC_400 3 287#define SDHCI_SPEC_410 4 288#define SDHCI_SPEC_420 5 289 290/* 291 * End of controller registers. 292 */ 293 294#define SDHCI_MAX_DIV_SPEC_200 256 295#define SDHCI_MAX_DIV_SPEC_300 2046 296 297/* 298 * Host SDMA buffer boundary. Valid values from 4K to 512K in powers of 2. 299 */ 300#define SDHCI_DEFAULT_BOUNDARY_SIZE (512 * 1024) 301#define SDHCI_DEFAULT_BOUNDARY_ARG (ilog2(SDHCI_DEFAULT_BOUNDARY_SIZE) - 12) 302 303/* ADMA2 32-bit DMA descriptor size */ 304#define SDHCI_ADMA2_32_DESC_SZ 8 305 306/* ADMA2 32-bit descriptor */ 307struct sdhci_adma2_32_desc { 308 __le16 cmd; 309 __le16 len; 310 __le32 addr; 311} __packed __aligned(4); 312 313/* ADMA2 data alignment */ 314#define SDHCI_ADMA2_ALIGN 4 315#define SDHCI_ADMA2_MASK (SDHCI_ADMA2_ALIGN - 1) 316 317/* 318 * ADMA2 descriptor alignment. Some controllers (e.g. Intel) require 8 byte 319 * alignment for the descriptor table even in 32-bit DMA mode. Memory 320 * allocation is at least 8 byte aligned anyway, so just stipulate 8 always. 321 */ 322#define SDHCI_ADMA2_DESC_ALIGN 8 323 324/* 325 * ADMA2 64-bit DMA descriptor size 326 * According to SD Host Controller spec v4.10, there are two kinds of 327 * descriptors for 64-bit addressing mode: 96-bit Descriptor and 128-bit 328 * Descriptor, if Host Version 4 Enable is set in the Host Control 2 329 * register, 128-bit Descriptor will be selected. 330 */ 331#define SDHCI_ADMA2_64_DESC_SZ(host) ((host)->v4_mode ? 16 : 12) 332 333/* 334 * ADMA2 64-bit descriptor. Note 12-byte descriptor can't always be 8-byte 335 * aligned. 336 */ 337struct sdhci_adma2_64_desc { 338 __le16 cmd; 339 __le16 len; 340 __le32 addr_lo; 341 __le32 addr_hi; 342} __packed __aligned(4); 343 344#define ADMA2_TRAN_VALID 0x21 345#define ADMA2_NOP_END_VALID 0x3 346#define ADMA2_END 0x2 347 348/* 349 * Maximum segments assuming a 512KiB maximum requisition size and a minimum 350 * 4KiB page size. Note this also allows enough for multiple descriptors in 351 * case of PAGE_SIZE >= 64KiB. 352 */ 353#define SDHCI_MAX_SEGS 128 354 355/* Allow for a command request and a data request at the same time */ 356#define SDHCI_MAX_MRQS 2 357 358/* 359 * 48bit command and 136 bit response in 100KHz clock could take upto 2.48ms. 360 * However since the start time of the command, the time between 361 * command and response, and the time between response and start of data is 362 * not known, set the command transfer time to 10ms. 363 */ 364#define MMC_CMD_TRANSFER_TIME (10 * NSEC_PER_MSEC) /* max 10 ms */ 365 366#define sdhci_err_stats_inc(host, err_name) \ 367 mmc_debugfs_err_stats_inc((host)->mmc, MMC_ERR_##err_name) 368 369enum sdhci_cookie { 370 COOKIE_UNMAPPED, 371 COOKIE_PRE_MAPPED, /* mapped by sdhci_pre_req() */ 372 COOKIE_MAPPED, /* mapped by sdhci_prepare_data() */ 373}; 374 375struct sdhci_host { 376 /* Data set by hardware interface driver */ 377 const char *hw_name; /* Hardware bus name */ 378 379 unsigned int quirks; /* Deviations from spec. */ 380 381/* Controller doesn't honor resets unless we touch the clock register */ 382#define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1<<0) 383/* Controller has bad caps bits, but really supports DMA */ 384#define SDHCI_QUIRK_FORCE_DMA (1<<1) 385/* Controller doesn't like to be reset when there is no card inserted. */ 386#define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2) 387/* Controller doesn't like clearing the power reg before a change */ 388#define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3) 389/* Controller has an unusable DMA engine */ 390#define SDHCI_QUIRK_BROKEN_DMA (1<<5) 391/* Controller has an unusable ADMA engine */ 392#define SDHCI_QUIRK_BROKEN_ADMA (1<<6) 393/* Controller can only DMA from 32-bit aligned addresses */ 394#define SDHCI_QUIRK_32BIT_DMA_ADDR (1<<7) 395/* Controller can only DMA chunk sizes that are a multiple of 32 bits */ 396#define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<8) 397/* Controller can only ADMA chunks that are a multiple of 32 bits */ 398#define SDHCI_QUIRK_32BIT_ADMA_SIZE (1<<9) 399/* Controller needs to be reset after each request to stay stable */ 400#define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<10) 401/* Controller needs voltage and power writes to happen separately */ 402#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<11) 403/* Controller provides an incorrect timeout value for transfers */ 404#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12) 405/* Controller has an issue with buffer bits for small transfers */ 406#define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13) 407/* Controller does not provide transfer-complete interrupt when not busy */ 408#define SDHCI_QUIRK_NO_BUSY_IRQ (1<<14) 409/* Controller has unreliable card detection */ 410#define SDHCI_QUIRK_BROKEN_CARD_DETECTION (1<<15) 411/* Controller reports inverted write-protect state */ 412#define SDHCI_QUIRK_INVERTED_WRITE_PROTECT (1<<16) 413/* Controller has unusable command queue engine */ 414#define SDHCI_QUIRK_BROKEN_CQE (1<<17) 415/* Controller does not like fast PIO transfers */ 416#define SDHCI_QUIRK_PIO_NEEDS_DELAY (1<<18) 417/* Controller does not have a LED */ 418#define SDHCI_QUIRK_NO_LED (1<<19) 419/* Controller has to be forced to use block size of 2048 bytes */ 420#define SDHCI_QUIRK_FORCE_BLK_SZ_2048 (1<<20) 421/* Controller cannot do multi-block transfers */ 422#define SDHCI_QUIRK_NO_MULTIBLOCK (1<<21) 423/* Controller can only handle 1-bit data transfers */ 424#define SDHCI_QUIRK_FORCE_1_BIT_DATA (1<<22) 425/* Controller needs 10ms delay between applying power and clock */ 426#define SDHCI_QUIRK_DELAY_AFTER_POWER (1<<23) 427/* Controller uses SDCLK instead of TMCLK for data timeouts */ 428#define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK (1<<24) 429/* Controller reports wrong base clock capability */ 430#define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN (1<<25) 431/* Controller cannot support End Attribute in NOP ADMA descriptor */ 432#define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC (1<<26) 433/* Controller uses Auto CMD12 command to stop the transfer */ 434#define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 (1<<28) 435/* Controller doesn't have HISPD bit field in HI-SPEED SD card */ 436#define SDHCI_QUIRK_NO_HISPD_BIT (1<<29) 437/* Controller treats ADMA descriptors with length 0000h incorrectly */ 438#define SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC (1<<30) 439/* The read-only detection via SDHCI_PRESENT_STATE register is unstable */ 440#define SDHCI_QUIRK_UNSTABLE_RO_DETECT (1<<31) 441 442 unsigned int quirks2; /* More deviations from spec. */ 443 444#define SDHCI_QUIRK2_HOST_OFF_CARD_ON (1<<0) 445#define SDHCI_QUIRK2_HOST_NO_CMD23 (1<<1) 446/* The system physically doesn't support 1.8v, even if the host does */ 447#define SDHCI_QUIRK2_NO_1_8_V (1<<2) 448#define SDHCI_QUIRK2_PRESET_VALUE_BROKEN (1<<3) 449#define SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON (1<<4) 450/* Controller has a non-standard host control register */ 451#define SDHCI_QUIRK2_BROKEN_HOST_CONTROL (1<<5) 452/* Controller does not support HS200 */ 453#define SDHCI_QUIRK2_BROKEN_HS200 (1<<6) 454/* Controller does not support DDR50 */ 455#define SDHCI_QUIRK2_BROKEN_DDR50 (1<<7) 456/* Stop command (CMD12) can set Transfer Complete when not using MMC_RSP_BUSY */ 457#define SDHCI_QUIRK2_STOP_WITH_TC (1<<8) 458/* Controller does not support 64-bit DMA */ 459#define SDHCI_QUIRK2_BROKEN_64_BIT_DMA (1<<9) 460/* need clear transfer mode register before send cmd */ 461#define SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD (1<<10) 462/* Capability register bit-63 indicates HS400 support */ 463#define SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400 (1<<11) 464/* forced tuned clock */ 465#define SDHCI_QUIRK2_TUNING_WORK_AROUND (1<<12) 466/* disable the block count for single block transactions */ 467#define SDHCI_QUIRK2_SUPPORT_SINGLE (1<<13) 468/* Controller broken with using ACMD23 */ 469#define SDHCI_QUIRK2_ACMD23_BROKEN (1<<14) 470/* Broken Clock divider zero in controller */ 471#define SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN (1<<15) 472/* Controller has CRC in 136 bit Command Response */ 473#define SDHCI_QUIRK2_RSP_136_HAS_CRC (1<<16) 474/* 475 * Disable HW timeout if the requested timeout is more than the maximum 476 * obtainable timeout. 477 */ 478#define SDHCI_QUIRK2_DISABLE_HW_TIMEOUT (1<<17) 479/* 480 * 32-bit block count may not support eMMC where upper bits of CMD23 are used 481 * for other purposes. Consequently we support 16-bit block count by default. 482 * Otherwise, SDHCI_QUIRK2_USE_32BIT_BLK_CNT can be selected to use 32-bit 483 * block count. 484 */ 485#define SDHCI_QUIRK2_USE_32BIT_BLK_CNT (1<<18) 486/* Issue CMD and DATA reset together */ 487#define SDHCI_QUIRK2_ISSUE_CMD_DAT_RESET_TOGETHER (1<<19) 488 489 int irq; /* Device IRQ */ 490 void __iomem *ioaddr; /* Mapped address */ 491 phys_addr_t mapbase; /* physical address base */ 492 char *bounce_buffer; /* For packing SDMA reads/writes */ 493 dma_addr_t bounce_addr; 494 unsigned int bounce_buffer_size; 495 496 const struct sdhci_ops *ops; /* Low level hw interface */ 497 498 /* Internal data */ 499 struct mmc_host *mmc; /* MMC structure */ 500 struct mmc_host_ops mmc_host_ops; /* MMC host ops */ 501 u64 dma_mask; /* custom DMA mask */ 502 503#if IS_ENABLED(CONFIG_LEDS_CLASS) 504 struct led_classdev led; /* LED control */ 505 char led_name[32]; 506#endif 507 508 spinlock_t lock; /* Mutex */ 509 510 int flags; /* Host attributes */ 511#define SDHCI_USE_SDMA (1<<0) /* Host is SDMA capable */ 512#define SDHCI_USE_ADMA (1<<1) /* Host is ADMA capable */ 513#define SDHCI_REQ_USE_DMA (1<<2) /* Use DMA for this req. */ 514#define SDHCI_DEVICE_DEAD (1<<3) /* Device unresponsive */ 515#define SDHCI_SDR50_NEEDS_TUNING (1<<4) /* SDR50 needs tuning */ 516#define SDHCI_AUTO_CMD12 (1<<6) /* Auto CMD12 support */ 517#define SDHCI_AUTO_CMD23 (1<<7) /* Auto CMD23 support */ 518#define SDHCI_PV_ENABLED (1<<8) /* Preset value enabled */ 519#define SDHCI_USE_64_BIT_DMA (1<<12) /* Use 64-bit DMA */ 520#define SDHCI_HS400_TUNING (1<<13) /* Tuning for HS400 */ 521#define SDHCI_SIGNALING_330 (1<<14) /* Host is capable of 3.3V signaling */ 522#define SDHCI_SIGNALING_180 (1<<15) /* Host is capable of 1.8V signaling */ 523#define SDHCI_SIGNALING_120 (1<<16) /* Host is capable of 1.2V signaling */ 524 525 unsigned int version; /* SDHCI spec. version */ 526 527 unsigned int max_clk; /* Max possible freq (MHz) */ 528 unsigned int timeout_clk; /* Timeout freq (KHz) */ 529 u8 max_timeout_count; /* Vendor specific max timeout count */ 530 unsigned int clk_mul; /* Clock Muliplier value */ 531 532 unsigned int clock; /* Current clock (MHz) */ 533 u8 pwr; /* Current voltage */ 534 u8 drv_type; /* Current UHS-I driver type */ 535 bool reinit_uhs; /* Force UHS-related re-initialization */ 536 537 bool runtime_suspended; /* Host is runtime suspended */ 538 bool bus_on; /* Bus power prevents runtime suspend */ 539 bool preset_enabled; /* Preset is enabled */ 540 bool pending_reset; /* Cmd/data reset is pending */ 541 bool irq_wake_enabled; /* IRQ wakeup is enabled */ 542 bool v4_mode; /* Host Version 4 Enable */ 543 bool use_external_dma; /* Host selects to use external DMA */ 544 bool always_defer_done; /* Always defer to complete requests */ 545 546 struct mmc_request *mrqs_done[SDHCI_MAX_MRQS]; /* Requests done */ 547 struct mmc_command *cmd; /* Current command */ 548 struct mmc_command *data_cmd; /* Current data command */ 549 struct mmc_command *deferred_cmd; /* Deferred command */ 550 struct mmc_data *data; /* Current data request */ 551 unsigned int data_early:1; /* Data finished before cmd */ 552 553 struct sg_mapping_iter sg_miter; /* SG state for PIO */ 554 unsigned int blocks; /* remaining PIO blocks */ 555 556 int sg_count; /* Mapped sg entries */ 557 int max_adma; /* Max. length in ADMA descriptor */ 558 559 void *adma_table; /* ADMA descriptor table */ 560 void *align_buffer; /* Bounce buffer */ 561 562 size_t adma_table_sz; /* ADMA descriptor table size */ 563 size_t align_buffer_sz; /* Bounce buffer size */ 564 565 dma_addr_t adma_addr; /* Mapped ADMA descr. table */ 566 dma_addr_t align_addr; /* Mapped bounce buffer */ 567 568 unsigned int desc_sz; /* ADMA current descriptor size */ 569 unsigned int alloc_desc_sz; /* ADMA descr. max size host supports */ 570 571 struct workqueue_struct *complete_wq; /* Request completion wq */ 572 struct work_struct complete_work; /* Request completion work */ 573 574 struct timer_list timer; /* Timer for timeouts */ 575 struct timer_list data_timer; /* Timer for data timeouts */ 576 577#if IS_ENABLED(CONFIG_MMC_SDHCI_EXTERNAL_DMA) 578 struct dma_chan *rx_chan; 579 struct dma_chan *tx_chan; 580#endif 581 582 u32 caps; /* CAPABILITY_0 */ 583 u32 caps1; /* CAPABILITY_1 */ 584 bool read_caps; /* Capability flags have been read */ 585 586 bool sdhci_core_to_disable_vqmmc; /* sdhci core can disable vqmmc */ 587 unsigned int ocr_avail_sdio; /* OCR bit masks */ 588 unsigned int ocr_avail_sd; 589 unsigned int ocr_avail_mmc; 590 u32 ocr_mask; /* available voltages */ 591 592 unsigned timing; /* Current timing */ 593 594 u32 thread_isr; 595 596 /* cached registers */ 597 u32 ier; 598 599 bool cqe_on; /* CQE is operating */ 600 u32 cqe_ier; /* CQE interrupt mask */ 601 u32 cqe_err_ier; /* CQE error interrupt mask */ 602 603 wait_queue_head_t buf_ready_int; /* Waitqueue for Buffer Read Ready interrupt */ 604 unsigned int tuning_done; /* Condition flag set when CMD19 succeeds */ 605 606 unsigned int tuning_count; /* Timer count for re-tuning */ 607 unsigned int tuning_mode; /* Re-tuning mode supported by host */ 608 unsigned int tuning_err; /* Error code for re-tuning */ 609#define SDHCI_TUNING_MODE_1 0 610#define SDHCI_TUNING_MODE_2 1 611#define SDHCI_TUNING_MODE_3 2 612 /* Delay (ms) between tuning commands */ 613 int tuning_delay; 614 int tuning_loop_count; 615 616 /* Host SDMA buffer boundary. */ 617 u32 sdma_boundary; 618 619 /* Host ADMA table count */ 620 u32 adma_table_cnt; 621 622 u64 data_timeout; 623 624 unsigned long private[] ____cacheline_aligned; 625}; 626 627struct sdhci_ops { 628#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS 629 u32 (*read_l)(struct sdhci_host *host, int reg); 630 u16 (*read_w)(struct sdhci_host *host, int reg); 631 u8 (*read_b)(struct sdhci_host *host, int reg); 632 void (*write_l)(struct sdhci_host *host, u32 val, int reg); 633 void (*write_w)(struct sdhci_host *host, u16 val, int reg); 634 void (*write_b)(struct sdhci_host *host, u8 val, int reg); 635#endif 636 637 void (*set_clock)(struct sdhci_host *host, unsigned int clock); 638 void (*set_power)(struct sdhci_host *host, unsigned char mode, 639 unsigned short vdd); 640 641 u32 (*irq)(struct sdhci_host *host, u32 intmask); 642 643 int (*set_dma_mask)(struct sdhci_host *host); 644 int (*enable_dma)(struct sdhci_host *host); 645 unsigned int (*get_max_clock)(struct sdhci_host *host); 646 unsigned int (*get_min_clock)(struct sdhci_host *host); 647 /* get_timeout_clock should return clk rate in unit of Hz */ 648 unsigned int (*get_timeout_clock)(struct sdhci_host *host); 649 unsigned int (*get_max_timeout_count)(struct sdhci_host *host); 650 void (*set_timeout)(struct sdhci_host *host, 651 struct mmc_command *cmd); 652 void (*set_bus_width)(struct sdhci_host *host, int width); 653 void (*platform_send_init_74_clocks)(struct sdhci_host *host, 654 u8 power_mode); 655 unsigned int (*get_ro)(struct sdhci_host *host); 656 void (*reset)(struct sdhci_host *host, u8 mask); 657 int (*platform_execute_tuning)(struct sdhci_host *host, u32 opcode); 658 void (*set_uhs_signaling)(struct sdhci_host *host, unsigned int uhs); 659 void (*hw_reset)(struct sdhci_host *host); 660 void (*adma_workaround)(struct sdhci_host *host, u32 intmask); 661 void (*card_event)(struct sdhci_host *host); 662 void (*voltage_switch)(struct sdhci_host *host); 663 void (*adma_write_desc)(struct sdhci_host *host, void **desc, 664 dma_addr_t addr, int len, unsigned int cmd); 665 void (*copy_to_bounce_buffer)(struct sdhci_host *host, 666 struct mmc_data *data, 667 unsigned int length); 668 void (*request_done)(struct sdhci_host *host, 669 struct mmc_request *mrq); 670 void (*dump_vendor_regs)(struct sdhci_host *host); 671}; 672 673#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS 674 675static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg) 676{ 677 if (unlikely(host->ops->write_l)) 678 host->ops->write_l(host, val, reg); 679 else 680 writel(val, host->ioaddr + reg); 681} 682 683static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg) 684{ 685 if (unlikely(host->ops->write_w)) 686 host->ops->write_w(host, val, reg); 687 else 688 writew(val, host->ioaddr + reg); 689} 690 691static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg) 692{ 693 if (unlikely(host->ops->write_b)) 694 host->ops->write_b(host, val, reg); 695 else 696 writeb(val, host->ioaddr + reg); 697} 698 699static inline u32 sdhci_readl(struct sdhci_host *host, int reg) 700{ 701 if (unlikely(host->ops->read_l)) 702 return host->ops->read_l(host, reg); 703 else 704 return readl(host->ioaddr + reg); 705} 706 707static inline u16 sdhci_readw(struct sdhci_host *host, int reg) 708{ 709 if (unlikely(host->ops->read_w)) 710 return host->ops->read_w(host, reg); 711 else 712 return readw(host->ioaddr + reg); 713} 714 715static inline u8 sdhci_readb(struct sdhci_host *host, int reg) 716{ 717 if (unlikely(host->ops->read_b)) 718 return host->ops->read_b(host, reg); 719 else 720 return readb(host->ioaddr + reg); 721} 722 723#else 724 725static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg) 726{ 727 writel(val, host->ioaddr + reg); 728} 729 730static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg) 731{ 732 writew(val, host->ioaddr + reg); 733} 734 735static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg) 736{ 737 writeb(val, host->ioaddr + reg); 738} 739 740static inline u32 sdhci_readl(struct sdhci_host *host, int reg) 741{ 742 return readl(host->ioaddr + reg); 743} 744 745static inline u16 sdhci_readw(struct sdhci_host *host, int reg) 746{ 747 return readw(host->ioaddr + reg); 748} 749 750static inline u8 sdhci_readb(struct sdhci_host *host, int reg) 751{ 752 return readb(host->ioaddr + reg); 753} 754 755#endif /* CONFIG_MMC_SDHCI_IO_ACCESSORS */ 756 757struct sdhci_host *sdhci_alloc_host(struct device *dev, size_t priv_size); 758void sdhci_free_host(struct sdhci_host *host); 759 760static inline void *sdhci_priv(struct sdhci_host *host) 761{ 762 return host->private; 763} 764 765void __sdhci_read_caps(struct sdhci_host *host, const u16 *ver, 766 const u32 *caps, const u32 *caps1); 767int sdhci_setup_host(struct sdhci_host *host); 768void sdhci_cleanup_host(struct sdhci_host *host); 769int __sdhci_add_host(struct sdhci_host *host); 770int sdhci_add_host(struct sdhci_host *host); 771void sdhci_remove_host(struct sdhci_host *host, int dead); 772 773static inline void sdhci_read_caps(struct sdhci_host *host) 774{ 775 __sdhci_read_caps(host, NULL, NULL, NULL); 776} 777 778u16 sdhci_calc_clk(struct sdhci_host *host, unsigned int clock, 779 unsigned int *actual_clock); 780void sdhci_set_clock(struct sdhci_host *host, unsigned int clock); 781void sdhci_enable_clk(struct sdhci_host *host, u16 clk); 782void sdhci_set_power(struct sdhci_host *host, unsigned char mode, 783 unsigned short vdd); 784void sdhci_set_power_and_bus_voltage(struct sdhci_host *host, 785 unsigned char mode, 786 unsigned short vdd); 787void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode, 788 unsigned short vdd); 789int sdhci_get_cd_nogpio(struct mmc_host *mmc); 790void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq); 791int sdhci_request_atomic(struct mmc_host *mmc, struct mmc_request *mrq); 792void sdhci_set_bus_width(struct sdhci_host *host, int width); 793void sdhci_reset(struct sdhci_host *host, u8 mask); 794void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing); 795int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode); 796void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios); 797int sdhci_start_signal_voltage_switch(struct mmc_host *mmc, 798 struct mmc_ios *ios); 799void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable); 800void sdhci_adma_write_desc(struct sdhci_host *host, void **desc, 801 dma_addr_t addr, int len, unsigned int cmd); 802 803#ifdef CONFIG_PM 804int sdhci_suspend_host(struct sdhci_host *host); 805int sdhci_resume_host(struct sdhci_host *host); 806int sdhci_runtime_suspend_host(struct sdhci_host *host); 807int sdhci_runtime_resume_host(struct sdhci_host *host, int soft_reset); 808#endif 809 810void sdhci_cqe_enable(struct mmc_host *mmc); 811void sdhci_cqe_disable(struct mmc_host *mmc, bool recovery); 812bool sdhci_cqe_irq(struct sdhci_host *host, u32 intmask, int *cmd_error, 813 int *data_error); 814 815void sdhci_dumpregs(struct sdhci_host *host); 816void sdhci_enable_v4_mode(struct sdhci_host *host); 817 818void sdhci_start_tuning(struct sdhci_host *host); 819void sdhci_end_tuning(struct sdhci_host *host); 820void sdhci_reset_tuning(struct sdhci_host *host); 821void sdhci_send_tuning(struct sdhci_host *host, u32 opcode); 822void sdhci_abort_tuning(struct sdhci_host *host, u32 opcode); 823void sdhci_switch_external_dma(struct sdhci_host *host, bool en); 824void sdhci_set_data_timeout_irq(struct sdhci_host *host, bool enable); 825void __sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd); 826 827#endif /* __SDHCI_HW_H */ 828