1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Kontron PLD MFD core driver
4 *
5 * Copyright (c) 2010-2013 Kontron Europe GmbH
6 * Author: Michael Brunner <michael.brunner@kontron.com>
7 */
8
9#include <linux/platform_device.h>
10#include <linux/mfd/core.h>
11#include <linux/mfd/kempld.h>
12#include <linux/module.h>
13#include <linux/dmi.h>
14#include <linux/io.h>
15#include <linux/delay.h>
16#include <linux/acpi.h>
17
18#define MAX_ID_LEN 4
19static char force_device_id[MAX_ID_LEN + 1] = "";
20module_param_string(force_device_id, force_device_id,
21		    sizeof(force_device_id), 0);
22MODULE_PARM_DESC(force_device_id, "Override detected product");
23
24/*
25 * Get hardware mutex to block firmware from accessing the pld.
26 * It is possible for the firmware may hold the mutex for an extended length of
27 * time. This function will block until access has been granted.
28 */
29static void kempld_get_hardware_mutex(struct kempld_device_data *pld)
30{
31	/* The mutex bit will read 1 until access has been granted */
32	while (ioread8(pld->io_index) & KEMPLD_MUTEX_KEY)
33		usleep_range(1000, 3000);
34}
35
36static void kempld_release_hardware_mutex(struct kempld_device_data *pld)
37{
38	/* The harware mutex is released when 1 is written to the mutex bit. */
39	iowrite8(KEMPLD_MUTEX_KEY, pld->io_index);
40}
41
42static int kempld_get_info_generic(struct kempld_device_data *pld)
43{
44	u16 version;
45	u8 spec;
46
47	kempld_get_mutex(pld);
48
49	version = kempld_read16(pld, KEMPLD_VERSION);
50	spec = kempld_read8(pld, KEMPLD_SPEC);
51	pld->info.buildnr = kempld_read16(pld, KEMPLD_BUILDNR);
52
53	pld->info.minor = KEMPLD_VERSION_GET_MINOR(version);
54	pld->info.major = KEMPLD_VERSION_GET_MAJOR(version);
55	pld->info.number = KEMPLD_VERSION_GET_NUMBER(version);
56	pld->info.type = KEMPLD_VERSION_GET_TYPE(version);
57
58	if (spec == 0xff) {
59		pld->info.spec_minor = 0;
60		pld->info.spec_major = 1;
61	} else {
62		pld->info.spec_minor = KEMPLD_SPEC_GET_MINOR(spec);
63		pld->info.spec_major = KEMPLD_SPEC_GET_MAJOR(spec);
64	}
65
66	if (pld->info.spec_major > 0)
67		pld->feature_mask = kempld_read16(pld, KEMPLD_FEATURE);
68	else
69		pld->feature_mask = 0;
70
71	kempld_release_mutex(pld);
72
73	return 0;
74}
75
76enum kempld_cells {
77	KEMPLD_I2C = 0,
78	KEMPLD_WDT,
79	KEMPLD_GPIO,
80	KEMPLD_UART,
81};
82
83static const char *kempld_dev_names[] = {
84	[KEMPLD_I2C] = "kempld-i2c",
85	[KEMPLD_WDT] = "kempld-wdt",
86	[KEMPLD_GPIO] = "kempld-gpio",
87	[KEMPLD_UART] = "kempld-uart",
88};
89
90#define KEMPLD_MAX_DEVS	ARRAY_SIZE(kempld_dev_names)
91
92static int kempld_register_cells_generic(struct kempld_device_data *pld)
93{
94	struct mfd_cell devs[KEMPLD_MAX_DEVS] = {};
95	int i = 0;
96
97	if (pld->feature_mask & KEMPLD_FEATURE_BIT_I2C)
98		devs[i++].name = kempld_dev_names[KEMPLD_I2C];
99
100	if (pld->feature_mask & KEMPLD_FEATURE_BIT_WATCHDOG)
101		devs[i++].name = kempld_dev_names[KEMPLD_WDT];
102
103	if (pld->feature_mask & KEMPLD_FEATURE_BIT_GPIO)
104		devs[i++].name = kempld_dev_names[KEMPLD_GPIO];
105
106	if (pld->feature_mask & KEMPLD_FEATURE_MASK_UART)
107		devs[i++].name = kempld_dev_names[KEMPLD_UART];
108
109	return mfd_add_devices(pld->dev, -1, devs, i, NULL, 0, NULL);
110}
111
112static struct resource kempld_ioresource = {
113	.start	= KEMPLD_IOINDEX,
114	.end	= KEMPLD_IODATA,
115	.flags	= IORESOURCE_IO,
116};
117
118static const struct kempld_platform_data kempld_platform_data_generic = {
119	.pld_clock		= KEMPLD_CLK,
120	.ioresource		= &kempld_ioresource,
121	.get_hardware_mutex	= kempld_get_hardware_mutex,
122	.release_hardware_mutex	= kempld_release_hardware_mutex,
123	.get_info		= kempld_get_info_generic,
124	.register_cells		= kempld_register_cells_generic,
125};
126
127static struct platform_device *kempld_pdev;
128
129static int kempld_create_platform_device(const struct dmi_system_id *id)
130{
131	const struct kempld_platform_data *pdata = id->driver_data;
132	int ret;
133
134	kempld_pdev = platform_device_alloc("kempld", -1);
135	if (!kempld_pdev)
136		return -ENOMEM;
137
138	ret = platform_device_add_data(kempld_pdev, pdata, sizeof(*pdata));
139	if (ret)
140		goto err;
141
142	ret = platform_device_add_resources(kempld_pdev, pdata->ioresource, 1);
143	if (ret)
144		goto err;
145
146	ret = platform_device_add(kempld_pdev);
147	if (ret)
148		goto err;
149
150	return 0;
151err:
152	platform_device_put(kempld_pdev);
153	return ret;
154}
155
156/**
157 * kempld_read8 - read 8 bit register
158 * @pld: kempld_device_data structure describing the PLD
159 * @index: register index on the chip
160 *
161 * kempld_get_mutex must be called prior to calling this function.
162 */
163u8 kempld_read8(struct kempld_device_data *pld, u8 index)
164{
165	iowrite8(index, pld->io_index);
166	return ioread8(pld->io_data);
167}
168EXPORT_SYMBOL_GPL(kempld_read8);
169
170/**
171 * kempld_write8 - write 8 bit register
172 * @pld: kempld_device_data structure describing the PLD
173 * @index: register index on the chip
174 * @data: new register value
175 *
176 * kempld_get_mutex must be called prior to calling this function.
177 */
178void kempld_write8(struct kempld_device_data *pld, u8 index, u8 data)
179{
180	iowrite8(index, pld->io_index);
181	iowrite8(data, pld->io_data);
182}
183EXPORT_SYMBOL_GPL(kempld_write8);
184
185/**
186 * kempld_read16 - read 16 bit register
187 * @pld: kempld_device_data structure describing the PLD
188 * @index: register index on the chip
189 *
190 * kempld_get_mutex must be called prior to calling this function.
191 */
192u16 kempld_read16(struct kempld_device_data *pld, u8 index)
193{
194	return kempld_read8(pld, index) | kempld_read8(pld, index + 1) << 8;
195}
196EXPORT_SYMBOL_GPL(kempld_read16);
197
198/**
199 * kempld_write16 - write 16 bit register
200 * @pld: kempld_device_data structure describing the PLD
201 * @index: register index on the chip
202 * @data: new register value
203 *
204 * kempld_get_mutex must be called prior to calling this function.
205 */
206void kempld_write16(struct kempld_device_data *pld, u8 index, u16 data)
207{
208	kempld_write8(pld, index, (u8)data);
209	kempld_write8(pld, index + 1, (u8)(data >> 8));
210}
211EXPORT_SYMBOL_GPL(kempld_write16);
212
213/**
214 * kempld_read32 - read 32 bit register
215 * @pld: kempld_device_data structure describing the PLD
216 * @index: register index on the chip
217 *
218 * kempld_get_mutex must be called prior to calling this function.
219 */
220u32 kempld_read32(struct kempld_device_data *pld, u8 index)
221{
222	return kempld_read16(pld, index) | kempld_read16(pld, index + 2) << 16;
223}
224EXPORT_SYMBOL_GPL(kempld_read32);
225
226/**
227 * kempld_write32 - write 32 bit register
228 * @pld: kempld_device_data structure describing the PLD
229 * @index: register index on the chip
230 * @data: new register value
231 *
232 * kempld_get_mutex must be called prior to calling this function.
233 */
234void kempld_write32(struct kempld_device_data *pld, u8 index, u32 data)
235{
236	kempld_write16(pld, index, (u16)data);
237	kempld_write16(pld, index + 2, (u16)(data >> 16));
238}
239EXPORT_SYMBOL_GPL(kempld_write32);
240
241/**
242 * kempld_get_mutex - acquire PLD mutex
243 * @pld: kempld_device_data structure describing the PLD
244 */
245void kempld_get_mutex(struct kempld_device_data *pld)
246{
247	const struct kempld_platform_data *pdata = dev_get_platdata(pld->dev);
248
249	mutex_lock(&pld->lock);
250	pdata->get_hardware_mutex(pld);
251}
252EXPORT_SYMBOL_GPL(kempld_get_mutex);
253
254/**
255 * kempld_release_mutex - release PLD mutex
256 * @pld: kempld_device_data structure describing the PLD
257 */
258void kempld_release_mutex(struct kempld_device_data *pld)
259{
260	const struct kempld_platform_data *pdata = dev_get_platdata(pld->dev);
261
262	pdata->release_hardware_mutex(pld);
263	mutex_unlock(&pld->lock);
264}
265EXPORT_SYMBOL_GPL(kempld_release_mutex);
266
267/**
268 * kempld_get_info - update device specific information
269 * @pld: kempld_device_data structure describing the PLD
270 *
271 * This function calls the configured board specific kempld_get_info_XXXX
272 * function which is responsible for gathering information about the specific
273 * hardware. The information is then stored within the pld structure.
274 */
275static int kempld_get_info(struct kempld_device_data *pld)
276{
277	int ret;
278	const struct kempld_platform_data *pdata = dev_get_platdata(pld->dev);
279	char major, minor;
280
281	ret = pdata->get_info(pld);
282	if (ret)
283		return ret;
284
285	/* The Kontron PLD firmware version string has the following format:
286	 * Pwxy.zzzz
287	 *   P:    Fixed
288	 *   w:    PLD number    - 1 hex digit
289	 *   x:    Major version - 1 alphanumerical digit (0-9A-V)
290	 *   y:    Minor version - 1 alphanumerical digit (0-9A-V)
291	 *   zzzz: Build number  - 4 zero padded hex digits */
292
293	if (pld->info.major < 10)
294		major = pld->info.major + '0';
295	else
296		major = (pld->info.major - 10) + 'A';
297	if (pld->info.minor < 10)
298		minor = pld->info.minor + '0';
299	else
300		minor = (pld->info.minor - 10) + 'A';
301
302	ret = scnprintf(pld->info.version, sizeof(pld->info.version),
303			"P%X%c%c.%04X", pld->info.number, major, minor,
304			pld->info.buildnr);
305	if (ret < 0)
306		return ret;
307
308	return 0;
309}
310
311/*
312 * kempld_register_cells - register cell drivers
313 *
314 * This function registers cell drivers for the detected hardware by calling
315 * the configured kempld_register_cells_XXXX function which is responsible
316 * to detect and register the needed cell drivers.
317 */
318static int kempld_register_cells(struct kempld_device_data *pld)
319{
320	const struct kempld_platform_data *pdata = dev_get_platdata(pld->dev);
321
322	return pdata->register_cells(pld);
323}
324
325static const char *kempld_get_type_string(struct kempld_device_data *pld)
326{
327	const char *version_type;
328
329	switch (pld->info.type) {
330	case 0:
331		version_type = "release";
332		break;
333	case 1:
334		version_type = "debug";
335		break;
336	case 2:
337		version_type = "custom";
338		break;
339	default:
340		version_type = "unspecified";
341		break;
342	}
343
344	return version_type;
345}
346
347static ssize_t pld_version_show(struct device *dev,
348				struct device_attribute *attr, char *buf)
349{
350	struct kempld_device_data *pld = dev_get_drvdata(dev);
351
352	return sysfs_emit(buf, "%s\n", pld->info.version);
353}
354
355static ssize_t pld_specification_show(struct device *dev,
356				      struct device_attribute *attr, char *buf)
357{
358	struct kempld_device_data *pld = dev_get_drvdata(dev);
359
360	return sysfs_emit(buf, "%d.%d\n", pld->info.spec_major, pld->info.spec_minor);
361}
362
363static ssize_t pld_type_show(struct device *dev,
364			     struct device_attribute *attr, char *buf)
365{
366	struct kempld_device_data *pld = dev_get_drvdata(dev);
367
368	return sysfs_emit(buf, "%s\n", kempld_get_type_string(pld));
369}
370
371static DEVICE_ATTR_RO(pld_version);
372static DEVICE_ATTR_RO(pld_specification);
373static DEVICE_ATTR_RO(pld_type);
374
375static struct attribute *pld_attributes[] = {
376	&dev_attr_pld_version.attr,
377	&dev_attr_pld_specification.attr,
378	&dev_attr_pld_type.attr,
379	NULL
380};
381
382static const struct attribute_group pld_attr_group = {
383	.attrs = pld_attributes,
384};
385
386static int kempld_detect_device(struct kempld_device_data *pld)
387{
388	u8 index_reg;
389	int ret;
390
391	mutex_lock(&pld->lock);
392
393	/* Check for empty IO space */
394	index_reg = ioread8(pld->io_index);
395	if (index_reg == 0xff && ioread8(pld->io_data) == 0xff) {
396		mutex_unlock(&pld->lock);
397		return -ENODEV;
398	}
399
400	/* Release hardware mutex if acquired */
401	if (!(index_reg & KEMPLD_MUTEX_KEY)) {
402		iowrite8(KEMPLD_MUTEX_KEY, pld->io_index);
403		/* PXT and COMe-cPC2 boards may require a second release */
404		iowrite8(KEMPLD_MUTEX_KEY, pld->io_index);
405	}
406
407	mutex_unlock(&pld->lock);
408
409	ret = kempld_get_info(pld);
410	if (ret)
411		return ret;
412
413	dev_info(pld->dev, "Found Kontron PLD - %s (%s), spec %d.%d\n",
414		 pld->info.version, kempld_get_type_string(pld),
415		 pld->info.spec_major, pld->info.spec_minor);
416
417	ret = sysfs_create_group(&pld->dev->kobj, &pld_attr_group);
418	if (ret)
419		return ret;
420
421	ret = kempld_register_cells(pld);
422	if (ret)
423		sysfs_remove_group(&pld->dev->kobj, &pld_attr_group);
424
425	return ret;
426}
427
428#ifdef CONFIG_ACPI
429static int kempld_get_acpi_data(struct platform_device *pdev)
430{
431	struct list_head resource_list;
432	struct resource *resources;
433	struct resource_entry *rentry;
434	struct device *dev = &pdev->dev;
435	struct acpi_device *acpi_dev = ACPI_COMPANION(dev);
436	const struct kempld_platform_data *pdata;
437	int ret;
438	int count;
439
440	pdata = acpi_device_get_match_data(dev);
441	ret = platform_device_add_data(pdev, pdata,
442				       sizeof(struct kempld_platform_data));
443	if (ret)
444		return ret;
445
446	INIT_LIST_HEAD(&resource_list);
447	ret = acpi_dev_get_resources(acpi_dev, &resource_list, NULL, NULL);
448	if (ret < 0)
449		goto out;
450
451	count = ret;
452
453	if (count == 0) {
454		ret = platform_device_add_resources(pdev, pdata->ioresource, 1);
455		goto out;
456	}
457
458	resources = devm_kcalloc(&acpi_dev->dev, count, sizeof(*resources),
459				 GFP_KERNEL);
460	if (!resources) {
461		ret = -ENOMEM;
462		goto out;
463	}
464
465	count = 0;
466	list_for_each_entry(rentry, &resource_list, node) {
467		memcpy(&resources[count], rentry->res,
468		       sizeof(*resources));
469		count++;
470	}
471	ret = platform_device_add_resources(pdev, resources, count);
472
473out:
474	acpi_dev_free_resource_list(&resource_list);
475
476	return ret;
477}
478#else
479static int kempld_get_acpi_data(struct platform_device *pdev)
480{
481	return -ENODEV;
482}
483#endif /* CONFIG_ACPI */
484
485static int kempld_probe(struct platform_device *pdev)
486{
487	const struct kempld_platform_data *pdata;
488	struct device *dev = &pdev->dev;
489	struct kempld_device_data *pld;
490	struct resource *ioport;
491	int ret;
492
493	if (kempld_pdev == NULL) {
494		/*
495		 * No kempld_pdev device has been registered in kempld_init,
496		 * so we seem to be probing an ACPI platform device.
497		 */
498		ret = kempld_get_acpi_data(pdev);
499		if (ret)
500			return ret;
501	} else if (kempld_pdev != pdev) {
502		/*
503		 * The platform device we are probing is not the one we
504		 * registered in kempld_init using the DMI table, so this one
505		 * comes from ACPI.
506		 * As we can only probe one - abort here and use the DMI
507		 * based one instead.
508		 */
509		dev_notice(dev, "platform device exists - not using ACPI\n");
510		return -ENODEV;
511	}
512	pdata = dev_get_platdata(dev);
513
514	pld = devm_kzalloc(dev, sizeof(*pld), GFP_KERNEL);
515	if (!pld)
516		return -ENOMEM;
517
518	ioport = platform_get_resource(pdev, IORESOURCE_IO, 0);
519	if (!ioport)
520		return -EINVAL;
521
522	pld->io_base = devm_ioport_map(dev, ioport->start,
523					resource_size(ioport));
524	if (!pld->io_base)
525		return -ENOMEM;
526
527	pld->io_index = pld->io_base;
528	pld->io_data = pld->io_base + 1;
529	pld->pld_clock = pdata->pld_clock;
530	pld->dev = dev;
531
532	mutex_init(&pld->lock);
533	platform_set_drvdata(pdev, pld);
534
535	return kempld_detect_device(pld);
536}
537
538static int kempld_remove(struct platform_device *pdev)
539{
540	struct kempld_device_data *pld = platform_get_drvdata(pdev);
541	const struct kempld_platform_data *pdata = dev_get_platdata(pld->dev);
542
543	sysfs_remove_group(&pld->dev->kobj, &pld_attr_group);
544
545	mfd_remove_devices(&pdev->dev);
546	pdata->release_hardware_mutex(pld);
547
548	return 0;
549}
550
551#ifdef CONFIG_ACPI
552static const struct acpi_device_id kempld_acpi_table[] = {
553	{ "KEM0000", (kernel_ulong_t)&kempld_platform_data_generic },
554	{ "KEM0001", (kernel_ulong_t)&kempld_platform_data_generic },
555	{}
556};
557MODULE_DEVICE_TABLE(acpi, kempld_acpi_table);
558#endif
559
560static struct platform_driver kempld_driver = {
561	.driver		= {
562		.name	= "kempld",
563		.acpi_match_table = ACPI_PTR(kempld_acpi_table),
564	},
565	.probe		= kempld_probe,
566	.remove		= kempld_remove,
567};
568
569static const struct dmi_system_id kempld_dmi_table[] __initconst = {
570	{
571		.ident = "BBD6",
572		.matches = {
573			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
574			DMI_MATCH(DMI_BOARD_NAME, "COMe-bBD"),
575		},
576		.driver_data = (void *)&kempld_platform_data_generic,
577		.callback = kempld_create_platform_device,
578	}, {
579		.ident = "BBL6",
580		.matches = {
581			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
582			DMI_MATCH(DMI_BOARD_NAME, "COMe-bBL6"),
583		},
584		.driver_data = (void *)&kempld_platform_data_generic,
585		.callback = kempld_create_platform_device,
586	}, {
587		.ident = "BDV7",
588		.matches = {
589			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
590			DMI_MATCH(DMI_BOARD_NAME, "COMe-bDV7"),
591		},
592		.driver_data = (void *)&kempld_platform_data_generic,
593		.callback = kempld_create_platform_device,
594	}, {
595		.ident = "BHL6",
596		.matches = {
597			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
598			DMI_MATCH(DMI_BOARD_NAME, "COMe-bHL6"),
599		},
600		.driver_data = (void *)&kempld_platform_data_generic,
601		.callback = kempld_create_platform_device,
602	}, {
603		.ident = "BKL6",
604		.matches = {
605			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
606			DMI_MATCH(DMI_BOARD_NAME, "COMe-bKL6"),
607		},
608		.driver_data = (void *)&kempld_platform_data_generic,
609		.callback = kempld_create_platform_device,
610	}, {
611		.ident = "BSL6",
612		.matches = {
613			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
614			DMI_MATCH(DMI_BOARD_NAME, "COMe-bSL6"),
615		},
616		.driver_data = (void *)&kempld_platform_data_generic,
617		.callback = kempld_create_platform_device,
618	}, {
619		.ident = "CAL6",
620		.matches = {
621			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
622			DMI_MATCH(DMI_BOARD_NAME, "COMe-cAL"),
623		},
624		.driver_data = (void *)&kempld_platform_data_generic,
625		.callback = kempld_create_platform_device,
626	}, {
627		.ident = "CBL6",
628		.matches = {
629			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
630			DMI_MATCH(DMI_BOARD_NAME, "COMe-cBL6"),
631		},
632		.driver_data = (void *)&kempld_platform_data_generic,
633		.callback = kempld_create_platform_device,
634	}, {
635		.ident = "CBW6",
636		.matches = {
637			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
638			DMI_MATCH(DMI_BOARD_NAME, "COMe-cBW6"),
639		},
640		.driver_data = (void *)&kempld_platform_data_generic,
641		.callback = kempld_create_platform_device,
642	}, {
643		.ident = "CCR2",
644		.matches = {
645			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
646			DMI_MATCH(DMI_BOARD_NAME, "COMe-bIP2"),
647		},
648		.driver_data = (void *)&kempld_platform_data_generic,
649		.callback = kempld_create_platform_device,
650	}, {
651		.ident = "CCR6",
652		.matches = {
653			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
654			DMI_MATCH(DMI_BOARD_NAME, "COMe-bIP6"),
655		},
656		.driver_data = (void *)&kempld_platform_data_generic,
657		.callback = kempld_create_platform_device,
658	}, {
659		.ident = "CDV7",
660		.matches = {
661			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
662			DMI_MATCH(DMI_BOARD_NAME, "COMe-cDV7"),
663		},
664		.driver_data = (void *)&kempld_platform_data_generic,
665		.callback = kempld_create_platform_device,
666	}, {
667		.ident = "CHL6",
668		.matches = {
669			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
670			DMI_MATCH(DMI_BOARD_NAME, "COMe-cHL6"),
671		},
672		.driver_data = (void *)&kempld_platform_data_generic,
673		.callback = kempld_create_platform_device,
674	}, {
675		.ident = "CHR2",
676		.matches = {
677			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
678			DMI_MATCH(DMI_BOARD_NAME, "ETXexpress-SC T2"),
679		},
680		.driver_data = (void *)&kempld_platform_data_generic,
681		.callback = kempld_create_platform_device,
682	}, {
683		.ident = "CHR2",
684		.matches = {
685			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
686			DMI_MATCH(DMI_BOARD_NAME, "ETXe-SC T2"),
687		},
688		.driver_data = (void *)&kempld_platform_data_generic,
689		.callback = kempld_create_platform_device,
690	}, {
691		.ident = "CHR2",
692		.matches = {
693			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
694			DMI_MATCH(DMI_BOARD_NAME, "COMe-bSC2"),
695		},
696		.driver_data = (void *)&kempld_platform_data_generic,
697		.callback = kempld_create_platform_device,
698	}, {
699		.ident = "CHR6",
700		.matches = {
701			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
702			DMI_MATCH(DMI_BOARD_NAME, "ETXexpress-SC T6"),
703		},
704		.driver_data = (void *)&kempld_platform_data_generic,
705		.callback = kempld_create_platform_device,
706	}, {
707		.ident = "CHR6",
708		.matches = {
709			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
710			DMI_MATCH(DMI_BOARD_NAME, "ETXe-SC T6"),
711		},
712		.driver_data = (void *)&kempld_platform_data_generic,
713		.callback = kempld_create_platform_device,
714	}, {
715		.ident = "CHR6",
716		.matches = {
717			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
718			DMI_MATCH(DMI_BOARD_NAME, "COMe-bSC6"),
719		},
720		.driver_data = (void *)&kempld_platform_data_generic,
721		.callback = kempld_create_platform_device,
722	}, {
723		.ident = "CKL6",
724		.matches = {
725			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
726			DMI_MATCH(DMI_BOARD_NAME, "COMe-cKL6"),
727		},
728		.driver_data = (void *)&kempld_platform_data_generic,
729		.callback = kempld_create_platform_device,
730	}, {
731		.ident = "CNTG",
732		.matches = {
733			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
734			DMI_MATCH(DMI_BOARD_NAME, "ETXexpress-PC"),
735		},
736		.driver_data = (void *)&kempld_platform_data_generic,
737		.callback = kempld_create_platform_device,
738	}, {
739		.ident = "CNTG",
740		.matches = {
741			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
742			DMI_MATCH(DMI_BOARD_NAME, "COMe-bPC2"),
743		},
744		.driver_data = (void *)&kempld_platform_data_generic,
745		.callback = kempld_create_platform_device,
746	}, {
747		.ident = "CNTX",
748		.matches = {
749			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
750			DMI_MATCH(DMI_BOARD_NAME, "PXT"),
751		},
752		.driver_data = (void *)&kempld_platform_data_generic,
753		.callback = kempld_create_platform_device,
754	}, {
755		.ident = "CSL6",
756		.matches = {
757			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
758			DMI_MATCH(DMI_BOARD_NAME, "COMe-cSL6"),
759		},
760		.driver_data = (void *)&kempld_platform_data_generic,
761		.callback = kempld_create_platform_device,
762	}, {
763		.ident = "CVV6",
764		.matches = {
765			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
766			DMI_MATCH(DMI_BOARD_NAME, "COMe-cBT"),
767		},
768		.driver_data = (void *)&kempld_platform_data_generic,
769		.callback = kempld_create_platform_device,
770	}, {
771		.ident = "FRI2",
772		.matches = {
773			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
774			DMI_MATCH(DMI_BIOS_VERSION, "FRI2"),
775		},
776		.driver_data = (void *)&kempld_platform_data_generic,
777		.callback = kempld_create_platform_device,
778	}, {
779		.ident = "FRI2",
780		.matches = {
781			DMI_MATCH(DMI_PRODUCT_NAME, "Fish River Island II"),
782		},
783		.driver_data = (void *)&kempld_platform_data_generic,
784		.callback = kempld_create_platform_device,
785	}, {
786		.ident = "A203",
787		.matches = {
788			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
789			DMI_MATCH(DMI_BOARD_NAME, "KBox A-203"),
790		},
791		.driver_data = (void *)&kempld_platform_data_generic,
792		.callback = kempld_create_platform_device,
793	}, {
794		.ident = "M4A1",
795		.matches = {
796			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
797			DMI_MATCH(DMI_BOARD_NAME, "COMe-m4AL"),
798		},
799		.driver_data = (void *)&kempld_platform_data_generic,
800		.callback = kempld_create_platform_device,
801	}, {
802		.ident = "MAL1",
803		.matches = {
804			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
805			DMI_MATCH(DMI_BOARD_NAME, "COMe-mAL10"),
806		},
807		.driver_data = (void *)&kempld_platform_data_generic,
808		.callback = kempld_create_platform_device,
809	}, {
810		.ident = "MAPL",
811		.matches = {
812			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
813			DMI_MATCH(DMI_BOARD_NAME, "mITX-APL"),
814		},
815		.driver_data = (void *)&kempld_platform_data_generic,
816		.callback = kempld_create_platform_device,
817	}, {
818		.ident = "MBR1",
819		.matches = {
820			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
821			DMI_MATCH(DMI_BOARD_NAME, "ETX-OH"),
822		},
823		.driver_data = (void *)&kempld_platform_data_generic,
824		.callback = kempld_create_platform_device,
825	}, {
826		.ident = "MVV1",
827		.matches = {
828			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
829			DMI_MATCH(DMI_BOARD_NAME, "COMe-mBT"),
830		},
831		.driver_data = (void *)&kempld_platform_data_generic,
832		.callback = kempld_create_platform_device,
833	}, {
834		.ident = "NTC1",
835		.matches = {
836			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
837			DMI_MATCH(DMI_BOARD_NAME, "nanoETXexpress-TT"),
838		},
839		.driver_data = (void *)&kempld_platform_data_generic,
840		.callback = kempld_create_platform_device,
841	}, {
842		.ident = "NTC1",
843		.matches = {
844			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
845			DMI_MATCH(DMI_BOARD_NAME, "nETXe-TT"),
846		},
847		.driver_data = (void *)&kempld_platform_data_generic,
848		.callback = kempld_create_platform_device,
849	}, {
850		.ident = "NTC1",
851		.matches = {
852			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
853			DMI_MATCH(DMI_BOARD_NAME, "COMe-mTT"),
854		},
855		.driver_data = (void *)&kempld_platform_data_generic,
856		.callback = kempld_create_platform_device,
857	}, {
858		.ident = "NUP1",
859		.matches = {
860			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
861			DMI_MATCH(DMI_BOARD_NAME, "COMe-mCT"),
862		},
863		.driver_data = (void *)&kempld_platform_data_generic,
864		.callback = kempld_create_platform_device,
865	}, {
866		.ident = "PAPL",
867		.matches = {
868			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
869			DMI_MATCH(DMI_BOARD_NAME, "pITX-APL"),
870		},
871		.driver_data = (void *)&kempld_platform_data_generic,
872		.callback = kempld_create_platform_device,
873	}, {
874		.ident = "SXAL",
875		.matches = {
876			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
877			DMI_MATCH(DMI_BOARD_NAME, "SMARC-sXAL"),
878		},
879		.driver_data = (void *)&kempld_platform_data_generic,
880		.callback = kempld_create_platform_device,
881	}, {
882		.ident = "SXAL4",
883		.matches = {
884			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
885			DMI_MATCH(DMI_BOARD_NAME, "SMARC-sXA4"),
886		},
887		.driver_data = (void *)&kempld_platform_data_generic,
888		.callback = kempld_create_platform_device,
889	}, {
890		.ident = "UNP1",
891		.matches = {
892			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
893			DMI_MATCH(DMI_BOARD_NAME, "microETXexpress-DC"),
894		},
895		.driver_data = (void *)&kempld_platform_data_generic,
896		.callback = kempld_create_platform_device,
897	}, {
898		.ident = "UNP1",
899		.matches = {
900			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
901			DMI_MATCH(DMI_BOARD_NAME, "COMe-cDC2"),
902		},
903		.driver_data = (void *)&kempld_platform_data_generic,
904		.callback = kempld_create_platform_device,
905	}, {
906		.ident = "UNTG",
907		.matches = {
908			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
909			DMI_MATCH(DMI_BOARD_NAME, "microETXexpress-PC"),
910		},
911		.driver_data = (void *)&kempld_platform_data_generic,
912		.callback = kempld_create_platform_device,
913	}, {
914		.ident = "UNTG",
915		.matches = {
916			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
917			DMI_MATCH(DMI_BOARD_NAME, "COMe-cPC2"),
918		},
919		.driver_data = (void *)&kempld_platform_data_generic,
920		.callback = kempld_create_platform_device,
921	}, {
922		.ident = "UUP6",
923		.matches = {
924			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
925			DMI_MATCH(DMI_BOARD_NAME, "COMe-cCT6"),
926		},
927		.driver_data = (void *)&kempld_platform_data_generic,
928		.callback = kempld_create_platform_device,
929	}, {
930		.ident = "UTH6",
931		.matches = {
932			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
933			DMI_MATCH(DMI_BOARD_NAME, "COMe-cTH6"),
934		},
935		.driver_data = (void *)&kempld_platform_data_generic,
936		.callback = kempld_create_platform_device,
937	}, {
938		.ident = "Q7AL",
939		.matches = {
940			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
941			DMI_MATCH(DMI_BOARD_NAME, "Qseven-Q7AL"),
942		},
943		.driver_data = (void *)&kempld_platform_data_generic,
944		.callback = kempld_create_platform_device,
945	},
946	{}
947};
948MODULE_DEVICE_TABLE(dmi, kempld_dmi_table);
949
950static int __init kempld_init(void)
951{
952	const struct dmi_system_id *id;
953
954	if (force_device_id[0]) {
955		for (id = kempld_dmi_table;
956		     id->matches[0].slot != DMI_NONE; id++)
957			if (strstr(id->ident, force_device_id))
958				if (id->callback && !id->callback(id))
959					break;
960		if (id->matches[0].slot == DMI_NONE)
961			return -ENODEV;
962	} else {
963		dmi_check_system(kempld_dmi_table);
964	}
965
966	return platform_driver_register(&kempld_driver);
967}
968
969static void __exit kempld_exit(void)
970{
971	if (kempld_pdev)
972		platform_device_unregister(kempld_pdev);
973
974	platform_driver_unregister(&kempld_driver);
975}
976
977module_init(kempld_init);
978module_exit(kempld_exit);
979
980MODULE_DESCRIPTION("KEM PLD Core Driver");
981MODULE_AUTHOR("Michael Brunner <michael.brunner@kontron.com>");
982MODULE_LICENSE("GPL");
983MODULE_ALIAS("platform:kempld-core");
984