1// SPDX-License-Identifier: GPL-2.0+ 2// 3// em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB 4// video capture devices 5// 6// Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it> 7// Markus Rechberger <mrechberger@gmail.com> 8// Mauro Carvalho Chehab <mchehab@kernel.org> 9// Sascha Sommer <saschasommer@freenet.de> 10// Copyright (C) 2012 Frank Schäfer <fschaefer.oss@googlemail.com> 11 12#include "em28xx.h" 13 14#include <linux/init.h> 15#include <linux/module.h> 16#include <linux/slab.h> 17#include <linux/delay.h> 18#include <linux/i2c.h> 19#include <linux/usb.h> 20#include <media/tuner.h> 21#include <media/drv-intf/msp3400.h> 22#include <media/i2c/saa7115.h> 23#include <dt-bindings/media/tvp5150.h> 24#include <media/i2c/tvaudio.h> 25#include <media/tveeprom.h> 26#include <media/v4l2-common.h> 27#include <sound/ac97_codec.h> 28 29#define DRIVER_NAME "em28xx" 30 31static int tuner = -1; 32module_param(tuner, int, 0444); 33MODULE_PARM_DESC(tuner, "tuner type"); 34 35static unsigned int disable_ir; 36module_param(disable_ir, int, 0444); 37MODULE_PARM_DESC(disable_ir, "disable infrared remote support"); 38 39static unsigned int disable_usb_speed_check; 40module_param(disable_usb_speed_check, int, 0444); 41MODULE_PARM_DESC(disable_usb_speed_check, 42 "override min bandwidth requirement of 480M bps"); 43 44static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = -1U }; 45module_param_array(card, int, NULL, 0444); 46MODULE_PARM_DESC(card, "card type"); 47 48static int usb_xfer_mode = -1; 49module_param(usb_xfer_mode, int, 0444); 50MODULE_PARM_DESC(usb_xfer_mode, 51 "USB transfer mode for frame data (-1 = auto, 0 = prefer isoc, 1 = prefer bulk)"); 52 53/* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS - 1 */ 54static DECLARE_BITMAP(em28xx_devused, EM28XX_MAXBOARDS); 55 56struct em28xx_hash_table { 57 unsigned long hash; 58 unsigned int model; 59 unsigned int tuner; 60}; 61 62static void em28xx_pre_card_setup(struct em28xx *dev); 63 64/* 65 * Reset sequences for analog/digital modes 66 */ 67 68/* Reset for the most [analog] boards */ 69static const struct em28xx_reg_seq default_analog[] = { 70 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 71 { -1, -1, -1, -1}, 72}; 73 74/* Reset for the most [digital] boards */ 75static const struct em28xx_reg_seq default_digital[] = { 76 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 77 { -1, -1, -1, -1}, 78}; 79 80/* Board :Zolid Hybrid Tv Stick */ 81static struct em28xx_reg_seq zolid_tuner[] = { 82 {EM2820_R08_GPIO_CTRL, 0xfd, 0xff, 100}, 83 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 100}, 84 { -1, -1, -1, -1}, 85}; 86 87static struct em28xx_reg_seq zolid_digital[] = { 88 {EM2820_R08_GPIO_CTRL, 0x6a, 0xff, 100}, 89 {EM2820_R08_GPIO_CTRL, 0x7a, 0xff, 100}, 90 {EM2880_R04_GPO, 0x04, 0xff, 100}, 91 {EM2880_R04_GPO, 0x0c, 0xff, 100}, 92 { -1, -1, -1, -1}, 93}; 94 95/* Board Hauppauge WinTV HVR 900 analog */ 96static const struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = { 97 {EM2820_R08_GPIO_CTRL, 0x2d, ~EM_GPIO_4, 10}, 98 { 0x05, 0xff, 0x10, 10}, 99 { -1, -1, -1, -1}, 100}; 101 102/* Board Hauppauge WinTV HVR 900 digital */ 103static const struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = { 104 {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10}, 105 {EM2880_R04_GPO, 0x04, 0x0f, 10}, 106 {EM2880_R04_GPO, 0x0c, 0x0f, 10}, 107 { -1, -1, -1, -1}, 108}; 109 110/* Board Hauppauge WinTV HVR 900 (R2) digital */ 111static const struct em28xx_reg_seq hauppauge_wintv_hvr_900R2_digital[] = { 112 {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10}, 113 {EM2880_R04_GPO, 0x0c, 0x0f, 10}, 114 { -1, -1, -1, -1}, 115}; 116 117/* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */ 118static const struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = { 119 {EM2820_R08_GPIO_CTRL, 0x69, ~EM_GPIO_4, 10}, 120 { -1, -1, -1, -1}, 121}; 122 123/* Board - EM2882 Kworld 315U digital */ 124static const struct em28xx_reg_seq em2882_kworld_315u_digital[] = { 125 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 126 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, 127 {EM2880_R04_GPO, 0x04, 0xff, 10}, 128 {EM2880_R04_GPO, 0x0c, 0xff, 10}, 129 {EM2820_R08_GPIO_CTRL, 0x7e, 0xff, 10}, 130 { -1, -1, -1, -1}, 131}; 132 133static const struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = { 134 {EM2880_R04_GPO, 0x08, 0xff, 10}, 135 {EM2880_R04_GPO, 0x0c, 0xff, 10}, 136 {EM2880_R04_GPO, 0x08, 0xff, 10}, 137 {EM2880_R04_GPO, 0x0c, 0xff, 10}, 138 { -1, -1, -1, -1}, 139}; 140 141static const struct em28xx_reg_seq kworld_330u_analog[] = { 142 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 143 {EM2880_R04_GPO, 0x00, 0xff, 10}, 144 { -1, -1, -1, -1}, 145}; 146 147static const struct em28xx_reg_seq kworld_330u_digital[] = { 148 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 149 {EM2880_R04_GPO, 0x08, 0xff, 10}, 150 { -1, -1, -1, -1}, 151}; 152 153/* 154 * Evga inDtube 155 * GPIO0 - Enable digital power (s5h1409) - low to enable 156 * GPIO1 - Enable analog power (tvp5150/emp202) - low to enable 157 * GPIO4 - xc3028 reset 158 * GOP3 - s5h1409 reset 159 */ 160static const struct em28xx_reg_seq evga_indtube_analog[] = { 161 {EM2820_R08_GPIO_CTRL, 0x79, 0xff, 60}, 162 { -1, -1, -1, -1}, 163}; 164 165static const struct em28xx_reg_seq evga_indtube_digital[] = { 166 {EM2820_R08_GPIO_CTRL, 0x7a, 0xff, 1}, 167 {EM2880_R04_GPO, 0x04, 0xff, 10}, 168 {EM2880_R04_GPO, 0x0c, 0xff, 1}, 169 { -1, -1, -1, -1}, 170}; 171 172/* 173 * KWorld PlusTV 340U, UB435-Q and UB435-Q V2 (ATSC) GPIOs map: 174 * EM_GPIO_0 - currently unknown 175 * EM_GPIO_1 - LED disable/enable (1 = off, 0 = on) 176 * EM_GPIO_2 - currently unknown 177 * EM_GPIO_3 - currently unknown 178 * EM_GPIO_4 - TDA18271HD/C1 tuner (1 = active, 0 = in reset) 179 * EM_GPIO_5 - LGDT3304 ATSC/QAM demod (1 = active, 0 = in reset) 180 * EM_GPIO_6 - currently unknown 181 * EM_GPIO_7 - currently unknown 182 */ 183static const struct em28xx_reg_seq kworld_a340_digital[] = { 184 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 185 { -1, -1, -1, -1}, 186}; 187 188static const struct em28xx_reg_seq kworld_ub435q_v3_digital[] = { 189 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100}, 190 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 100}, 191 {EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 100}, 192 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 100}, 193 { -1, -1, -1, -1}, 194}; 195 196/* Pinnacle Hybrid Pro eb1a:2881 */ 197static const struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = { 198 {EM2820_R08_GPIO_CTRL, 0xfd, ~EM_GPIO_4, 10}, 199 { -1, -1, -1, -1}, 200}; 201 202static const struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = { 203 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 204 {EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */ 205 {EM2880_R04_GPO, 0x0c, 0xff, 1}, 206 { -1, -1, -1, -1}, 207}; 208 209static const struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_analog[] = { 210 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 211 {EM2880_R04_GPO, 0x00, 0xff, 10}, 212 { -1, -1, -1, -1}, 213}; 214 215static const struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = { 216 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 217 {EM2880_R04_GPO, 0x08, 0xff, 10}, 218 { -1, -1, -1, -1}, 219}; 220 221/* 222 * PCTV HD Mini (80e) GPIOs 223 * 0-5: not used 224 * 6: demod reset, active low 225 * 7: LED on, active high 226 */ 227static const struct em28xx_reg_seq em2874_pctv_80e_digital[] = { 228 {EM28XX_R06_I2C_CLK, 0x45, 0xff, 10}, /*400 KHz*/ 229 {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 100},/*Demod reset*/ 230 {EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 10}, 231 { -1, -1, -1, -1}, 232}; 233 234/* 235 * eb1a:2868 Reddo DVB-C USB TV Box 236 * GPIO4 - CU1216L NIM 237 * Other GPIOs seems to be don't care. 238 */ 239static const struct em28xx_reg_seq reddo_dvb_c_usb_box[] = { 240 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, 241 {EM2820_R08_GPIO_CTRL, 0xde, 0xff, 10}, 242 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, 243 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 244 {EM2820_R08_GPIO_CTRL, 0x7f, 0xff, 10}, 245 {EM2820_R08_GPIO_CTRL, 0x6f, 0xff, 10}, 246 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 247 { -1, -1, -1, -1}, 248}; 249 250/* Callback for the most boards */ 251static const struct em28xx_reg_seq default_tuner_gpio[] = { 252 {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10}, 253 {EM2820_R08_GPIO_CTRL, 0, EM_GPIO_4, 10}, 254 {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10}, 255 { -1, -1, -1, -1}, 256}; 257 258/* Mute/unmute */ 259static const struct em28xx_reg_seq compro_unmute_tv_gpio[] = { 260 {EM2820_R08_GPIO_CTRL, 5, 7, 10}, 261 { -1, -1, -1, -1}, 262}; 263 264static const struct em28xx_reg_seq compro_unmute_svid_gpio[] = { 265 {EM2820_R08_GPIO_CTRL, 4, 7, 10}, 266 { -1, -1, -1, -1}, 267}; 268 269static const struct em28xx_reg_seq compro_mute_gpio[] = { 270 {EM2820_R08_GPIO_CTRL, 6, 7, 10}, 271 { -1, -1, -1, -1}, 272}; 273 274/* Terratec AV350 */ 275static const struct em28xx_reg_seq terratec_av350_mute_gpio[] = { 276 {EM2820_R08_GPIO_CTRL, 0xff, 0x7f, 10}, 277 { -1, -1, -1, -1}, 278}; 279 280static const struct em28xx_reg_seq terratec_av350_unmute_gpio[] = { 281 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 282 { -1, -1, -1, -1}, 283}; 284 285static const struct em28xx_reg_seq silvercrest_reg_seq[] = { 286 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 287 {EM2820_R08_GPIO_CTRL, 0x01, 0xf7, 10}, 288 { -1, -1, -1, -1}, 289}; 290 291static const struct em28xx_reg_seq vc211a_enable[] = { 292 {EM2820_R08_GPIO_CTRL, 0xff, 0x07, 10}, 293 {EM2820_R08_GPIO_CTRL, 0xff, 0x0f, 10}, 294 {EM2820_R08_GPIO_CTRL, 0xff, 0x0b, 10}, 295 { -1, -1, -1, -1}, 296}; 297 298static const struct em28xx_reg_seq dikom_dk300_digital[] = { 299 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 300 {EM2880_R04_GPO, 0x08, 0xff, 10}, 301 { -1, -1, -1, -1}, 302}; 303 304/* Reset for the most [digital] boards */ 305static const struct em28xx_reg_seq leadership_digital[] = { 306 {EM2874_R80_GPIO_P0_CTRL, 0x70, 0xff, 10}, 307 { -1, -1, -1, -1}, 308}; 309 310static const struct em28xx_reg_seq leadership_reset[] = { 311 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10}, 312 {EM2874_R80_GPIO_P0_CTRL, 0xb0, 0xff, 10}, 313 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10}, 314 { -1, -1, -1, -1}, 315}; 316 317/* 318 * 2013:024f PCTV nanoStick T2 290e 319 * GPIO_6 - demod reset 320 * GPIO_7 - LED 321 */ 322static const struct em28xx_reg_seq pctv_290e[] = { 323 {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 80}, 324 {EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 80}, /* GPIO_6 = 1 */ 325 {EM2874_R80_GPIO_P0_CTRL, 0xc0, 0xff, 80}, /* GPIO_7 = 1 */ 326 { -1, -1, -1, -1}, 327}; 328 329#if 0 330static const struct em28xx_reg_seq terratec_h5_gpio[] = { 331 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 332 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100}, 333 {EM2874_R80_GPIO_P0_CTRL, 0xf2, 0xff, 50}, 334 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 50}, 335 { -1, -1, -1, -1}, 336}; 337 338static const struct em28xx_reg_seq terratec_h5_digital[] = { 339 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10}, 340 {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100}, 341 {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10}, 342 { -1, -1, -1, -1}, 343}; 344#endif 345 346/* 347 * 2013:024f PCTV DVB-S2 Stick 460e 348 * GPIO_0 - POWER_ON 349 * GPIO_1 - BOOST 350 * GPIO_2 - VUV_LNB (red LED) 351 * GPIO_3 - EXT_12V 352 * GPIO_4 - INT_DEM (DEMOD GPIO_0) 353 * GPIO_5 - INT_LNB 354 * GPIO_6 - RESET_DEM 355 * GPIO_7 - LED (green LED) 356 */ 357static const struct em28xx_reg_seq pctv_460e[] = { 358 {EM2874_R80_GPIO_P0_CTRL, 0x01, 0xff, 50}, 359 { 0x0d, 0xff, 0xff, 50}, 360 {EM2874_R80_GPIO_P0_CTRL, 0x41, 0xff, 50}, /* GPIO_6=1 */ 361 { 0x0d, 0x42, 0xff, 50}, 362 {EM2874_R80_GPIO_P0_CTRL, 0x61, 0xff, 50}, /* GPIO_5=1 */ 363 { -1, -1, -1, -1}, 364}; 365 366static const struct em28xx_reg_seq c3tech_digital_duo_digital[] = { 367 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10}, 368 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, /* xc5000 reset */ 369 {EM2874_R80_GPIO_P0_CTRL, 0xf9, 0xff, 35}, 370 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, 371 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10}, 372 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 10}, 373 {EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 10}, 374 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 20}, 375 { -1, -1, -1, -1}, 376}; 377 378/* 379 * 2013:0258 PCTV DVB-S2 Stick (461e) 380 * GPIO 0 = POWER_ON 381 * GPIO 1 = BOOST 382 * GPIO 2 = VUV_LNB (red LED) 383 * GPIO 3 = #EXT_12V 384 * GPIO 4 = INT_DEM 385 * GPIO 5 = INT_LNB 386 * GPIO 6 = #RESET_DEM 387 * GPIO 7 = P07_LED (green LED) 388 */ 389static const struct em28xx_reg_seq pctv_461e[] = { 390 {EM2874_R80_GPIO_P0_CTRL, 0x7f, 0xff, 0}, 391 {0x0d, 0xff, 0xff, 0}, 392 {EM2874_R80_GPIO_P0_CTRL, 0x3f, 0xff, 100}, /* reset demod */ 393 {EM2874_R80_GPIO_P0_CTRL, 0x7f, 0xff, 200}, /* reset demod */ 394 {0x0d, 0x42, 0xff, 0}, 395 {EM2874_R80_GPIO_P0_CTRL, 0xeb, 0xff, 0}, 396 {EM2874_R5F_TS_ENABLE, 0x84, 0x84, 0}, /* parallel? | null discard */ 397 { -1, -1, -1, -1}, 398}; 399 400#if 0 401static const struct em28xx_reg_seq hauppauge_930c_gpio[] = { 402 {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10}, 403 {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10}, /* xc5000 reset */ 404 {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10}, 405 {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10}, 406 { -1, -1, -1, -1}, 407}; 408 409static const struct em28xx_reg_seq hauppauge_930c_digital[] = { 410 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10}, 411 {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100}, 412 {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10}, 413 { -1, -1, -1, -1}, 414}; 415#endif 416 417/* 418 * 1b80:e425 MaxMedia UB425-TC 419 * 1b80:e1cc Delock 61959 420 * GPIO_6 - demod reset, 0=active 421 * GPIO_7 - LED, 0=active 422 */ 423static const struct em28xx_reg_seq maxmedia_ub425_tc[] = { 424 {EM2874_R80_GPIO_P0_CTRL, 0x83, 0xff, 100}, 425 {EM2874_R80_GPIO_P0_CTRL, 0xc3, 0xff, 100}, /* GPIO_6 = 1 */ 426 {EM2874_R80_GPIO_P0_CTRL, 0x43, 0xff, 000}, /* GPIO_7 = 0 */ 427 { -1, -1, -1, -1}, 428}; 429 430/* 431 * 2304:0242 PCTV QuatroStick (510e) 432 * GPIO_2: decoder reset, 0=active 433 * GPIO_4: decoder suspend, 0=active 434 * GPIO_6: demod reset, 0=active 435 * GPIO_7: LED, 1=active 436 */ 437static const struct em28xx_reg_seq pctv_510e[] = { 438 {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100}, 439 {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */ 440 {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */ 441 { -1, -1, -1, -1}, 442}; 443 444/* 445 * 2013:0251 PCTV QuatroStick nano (520e) 446 * GPIO_2: decoder reset, 0=active 447 * GPIO_4: decoder suspend, 0=active 448 * GPIO_6: demod reset, 0=active 449 * GPIO_7: LED, 1=active 450 */ 451static const struct em28xx_reg_seq pctv_520e[] = { 452 {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100}, 453 {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */ 454 {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */ 455 {EM2874_R80_GPIO_P0_CTRL, 0xd4, 0xff, 000}, /* GPIO_7 = 1 */ 456 { -1, -1, -1, -1}, 457}; 458 459/* 460 * 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam 461 * reg 0x80/0x84: 462 * GPIO_0: capturing LED, 0=on, 1=off 463 * GPIO_2: AV mute button, 0=pressed, 1=unpressed 464 * GPIO 3: illumination button, 0=pressed, 1=unpressed 465 * GPIO_6: illumination/flash LED, 0=on, 1=off 466 * reg 0x81/0x85: 467 * GPIO_7: snapshot button, 0=pressed, 1=unpressed 468 */ 469static const struct em28xx_reg_seq speedlink_vad_laplace_reg_seq[] = { 470 {EM2820_R08_GPIO_CTRL, 0xf7, 0xff, 10}, 471 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xb2, 10}, 472 { -1, -1, -1, -1}, 473}; 474 475static const struct em28xx_reg_seq pctv_292e[] = { 476 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0}, 477 {0x0d, 0xff, 0xff, 950}, 478 {EM2874_R80_GPIO_P0_CTRL, 0xbd, 0xff, 100}, 479 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 410}, 480 {EM2874_R80_GPIO_P0_CTRL, 0x7d, 0xff, 300}, 481 {EM2874_R80_GPIO_P0_CTRL, 0x7c, 0xff, 60}, 482 {0x0d, 0x42, 0xff, 50}, 483 {EM2874_R5F_TS_ENABLE, 0x85, 0xff, 0}, 484 {-1, -1, -1, -1}, 485}; 486 487static const struct em28xx_reg_seq terratec_t2_stick_hd[] = { 488 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0}, 489 {0x0d, 0xff, 0xff, 600}, 490 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 10}, 491 {EM2874_R80_GPIO_P0_CTRL, 0xbc, 0xff, 100}, 492 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 100}, 493 {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 300}, 494 {EM2874_R80_GPIO_P0_CTRL, 0xf8, 0xff, 100}, 495 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 300}, 496 {0x0d, 0x42, 0xff, 1000}, 497 {EM2874_R5F_TS_ENABLE, 0x85, 0xff, 0}, 498 {-1, -1, -1, -1}, 499}; 500 501static const struct em28xx_reg_seq plex_px_bcud[] = { 502 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0}, 503 {0x0d, 0xff, 0xff, 0}, 504 {EM2874_R50_IR_CONFIG, 0x01, 0xff, 0}, 505 {EM28XX_R06_I2C_CLK, 0x40, 0xff, 0}, 506 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 100}, 507 {EM28XX_R12_VINENABLE, 0x20, 0x20, 0}, 508 {0x0d, 0x42, 0xff, 1000}, 509 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 10}, 510 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, 511 {0x73, 0xfd, 0xff, 100}, 512 {-1, -1, -1, -1}, 513}; 514 515/* 516 * 2040:0265 Hauppauge WinTV-dualHD DVB Isoc 517 * 2040:8265 Hauppauge WinTV-dualHD DVB Bulk 518 * 2040:026d Hauppauge WinTV-dualHD ATSC/QAM Isoc 519 * 2040:826d Hauppauge WinTV-dualHD ATSC/QAM Bulk 520 * reg 0x80/0x84: 521 * GPIO_0: Yellow LED tuner 1, 0=on, 1=off 522 * GPIO_1: Green LED tuner 1, 0=on, 1=off 523 * GPIO_2: Yellow LED tuner 2, 0=on, 1=off 524 * GPIO_3: Green LED tuner 2, 0=on, 1=off 525 * GPIO_5: Reset #2, 0=active 526 * GPIO_6: Reset #1, 0=active 527 */ 528static const struct em28xx_reg_seq hauppauge_dualhd_dvb[] = { 529 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0}, 530 {0x0d, 0xff, 0xff, 200}, 531 {0x50, 0x04, 0xff, 300}, 532 {EM2874_R80_GPIO_P0_CTRL, 0xbf, 0xff, 100}, /* demod 1 reset */ 533 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100}, 534 {EM2874_R80_GPIO_P0_CTRL, 0xdf, 0xff, 100}, /* demod 2 reset */ 535 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100}, 536 {EM2874_R5F_TS_ENABLE, 0x00, 0xff, 50}, /* disable TS filters */ 537 {EM2874_R5D_TS1_PKT_SIZE, 0x05, 0xff, 50}, 538 {EM2874_R5E_TS2_PKT_SIZE, 0x05, 0xff, 50}, 539 {-1, -1, -1, -1}, 540}; 541 542/* Hauppauge USB QuadHD */ 543static struct em28xx_reg_seq hauppauge_usb_quadhd_atsc_reg_seq[] = { 544 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0}, 545 {0x0d, 0xff, 0xff, 200}, 546 {0x50, 0x04, 0xff, 300}, 547 {EM2874_R80_GPIO_P0_CTRL, 0xb0, 0xf0, 100}, /* demod 1 reset */ 548 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xf0, 100}, 549 {EM2874_R80_GPIO_P0_CTRL, 0xd0, 0xf0, 100}, /* demod 2 reset */ 550 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xf0, 100}, 551 {EM2874_R5F_TS_ENABLE, 0x44, 0xff, 50}, 552 {EM2874_R5D_TS1_PKT_SIZE, 0x05, 0xff, 50}, 553 {EM2874_R5E_TS2_PKT_SIZE, 0x05, 0xff, 50}, 554 {-1, -1, -1, -1}, 555}; 556 557/* 558 * Button definitions 559 */ 560static const struct em28xx_button std_snapshot_button[] = { 561 { 562 .role = EM28XX_BUTTON_SNAPSHOT, 563 .reg_r = EM28XX_R0C_USBSUSP, 564 .reg_clearing = EM28XX_R0C_USBSUSP, 565 .mask = EM28XX_R0C_USBSUSP_SNAPSHOT, 566 .inverted = 0, 567 }, 568 {-1, 0, 0, 0, 0}, 569}; 570 571static const struct em28xx_button speedlink_vad_laplace_buttons[] = { 572 { 573 .role = EM28XX_BUTTON_SNAPSHOT, 574 .reg_r = EM2874_R85_GPIO_P1_STATE, 575 .mask = 0x80, 576 .inverted = 1, 577 }, 578 { 579 .role = EM28XX_BUTTON_ILLUMINATION, 580 .reg_r = EM2874_R84_GPIO_P0_STATE, 581 .mask = 0x08, 582 .inverted = 1, 583 }, 584 {-1, 0, 0, 0, 0}, 585}; 586 587/* 588 * LED definitions 589 */ 590static struct em28xx_led speedlink_vad_laplace_leds[] = { 591 { 592 .role = EM28XX_LED_ANALOG_CAPTURING, 593 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 594 .gpio_mask = 0x01, 595 .inverted = 1, 596 }, 597 { 598 .role = EM28XX_LED_ILLUMINATION, 599 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 600 .gpio_mask = 0x40, 601 .inverted = 1, 602 }, 603 {-1, 0, 0, 0}, 604}; 605 606static struct em28xx_led kworld_ub435q_v3_leds[] = { 607 { 608 .role = EM28XX_LED_DIGITAL_CAPTURING, 609 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 610 .gpio_mask = 0x80, 611 .inverted = 1, 612 }, 613 {-1, 0, 0, 0}, 614}; 615 616static struct em28xx_led pctv_80e_leds[] = { 617 { 618 .role = EM28XX_LED_DIGITAL_CAPTURING, 619 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 620 .gpio_mask = 0x80, 621 .inverted = 0, 622 }, 623 {-1, 0, 0, 0}, 624}; 625 626static struct em28xx_led terratec_grabby_leds[] = { 627 { 628 .role = EM28XX_LED_ANALOG_CAPTURING, 629 .gpio_reg = EM2820_R08_GPIO_CTRL, 630 .gpio_mask = EM_GPIO_3, 631 .inverted = 1, 632 }, 633 {-1, 0, 0, 0}, 634}; 635 636static struct em28xx_led hauppauge_dualhd_leds[] = { 637 { 638 .role = EM28XX_LED_DIGITAL_CAPTURING, 639 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 640 .gpio_mask = EM_GPIO_1, 641 .inverted = 1, 642 }, 643 { 644 .role = EM28XX_LED_DIGITAL_CAPTURING_TS2, 645 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 646 .gpio_mask = EM_GPIO_3, 647 .inverted = 1, 648 }, 649 {-1, 0, 0, 0}, 650}; 651 652static struct em28xx_led hauppauge_usb_quadhd_leds[] = { 653 { 654 .role = EM28XX_LED_DIGITAL_CAPTURING, 655 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 656 .gpio_mask = EM_GPIO_2, 657 .inverted = 1, 658 }, 659 { 660 .role = EM28XX_LED_DIGITAL_CAPTURING_TS2, 661 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 662 .gpio_mask = EM_GPIO_0, 663 .inverted = 1, 664 }, 665 {-1, 0, 0, 0}, 666}; 667 668/* 669 * Board definitions 670 */ 671const struct em28xx_board em28xx_boards[] = { 672 [EM2750_BOARD_UNKNOWN] = { 673 .name = "EM2710/EM2750/EM2751 webcam grabber", 674 .xclk = EM28XX_XCLK_FREQUENCY_20MHZ, 675 .tuner_type = TUNER_ABSENT, 676 .is_webcam = 1, 677 .input = { { 678 .type = EM28XX_VMUX_COMPOSITE, 679 .vmux = 0, 680 .amux = EM28XX_AMUX_VIDEO, 681 .gpio = silvercrest_reg_seq, 682 } }, 683 }, 684 [EM2800_BOARD_UNKNOWN] = { 685 .name = "Unknown EM2800 video grabber", 686 .is_em2800 = 1, 687 .tda9887_conf = TDA9887_PRESENT, 688 .decoder = EM28XX_SAA711X, 689 .tuner_type = TUNER_ABSENT, 690 .input = { { 691 .type = EM28XX_VMUX_COMPOSITE, 692 .vmux = SAA7115_COMPOSITE0, 693 .amux = EM28XX_AMUX_LINE_IN, 694 }, { 695 .type = EM28XX_VMUX_SVIDEO, 696 .vmux = SAA7115_SVIDEO3, 697 .amux = EM28XX_AMUX_LINE_IN, 698 } }, 699 }, 700 [EM2820_BOARD_UNKNOWN] = { 701 .name = "Unknown EM2750/28xx video grabber", 702 .tuner_type = TUNER_ABSENT, 703 .is_webcam = 1, /* To enable sensor probe */ 704 }, 705 [EM2882_BOARD_ZOLID_HYBRID_TV_STICK] = { 706 .name = ":ZOLID HYBRID TV STICK", 707 .tuner_type = TUNER_XC2028, 708 .tuner_gpio = zolid_tuner, 709 .decoder = EM28XX_TVP5150, 710 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 711 .mts_firmware = 1, 712 .has_dvb = 1, 713 .dvb_gpio = zolid_digital, 714 }, 715 [EM2750_BOARD_DLCW_130] = { 716 /* Beijing Huaqi Information Digital Technology Co., Ltd */ 717 .name = "Huaqi DLCW-130", 718 .valid = EM28XX_BOARD_NOT_VALIDATED, 719 .xclk = EM28XX_XCLK_FREQUENCY_48MHZ, 720 .tuner_type = TUNER_ABSENT, 721 .is_webcam = 1, 722 .input = { { 723 .type = EM28XX_VMUX_COMPOSITE, 724 .vmux = 0, 725 .amux = EM28XX_AMUX_VIDEO, 726 } }, 727 }, 728 [EM2820_BOARD_KWORLD_PVRTV2800RF] = { 729 .name = "Kworld PVR TV 2800 RF", 730 .tuner_type = TUNER_TEMIC_PAL, 731 .tda9887_conf = TDA9887_PRESENT, 732 .decoder = EM28XX_SAA711X, 733 .input = { { 734 .type = EM28XX_VMUX_COMPOSITE, 735 .vmux = SAA7115_COMPOSITE0, 736 .amux = EM28XX_AMUX_LINE_IN, 737 }, { 738 .type = EM28XX_VMUX_SVIDEO, 739 .vmux = SAA7115_SVIDEO3, 740 .amux = EM28XX_AMUX_LINE_IN, 741 } }, 742 }, 743 [EM2820_BOARD_GADMEI_TVR200] = { 744 .name = "Gadmei TVR200", 745 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 746 .tda9887_conf = TDA9887_PRESENT, 747 .decoder = EM28XX_SAA711X, 748 .input = { { 749 .type = EM28XX_VMUX_TELEVISION, 750 .vmux = SAA7115_COMPOSITE2, 751 .amux = EM28XX_AMUX_LINE_IN, 752 }, { 753 .type = EM28XX_VMUX_COMPOSITE, 754 .vmux = SAA7115_COMPOSITE0, 755 .amux = EM28XX_AMUX_LINE_IN, 756 }, { 757 .type = EM28XX_VMUX_SVIDEO, 758 .vmux = SAA7115_SVIDEO3, 759 .amux = EM28XX_AMUX_LINE_IN, 760 } }, 761 }, 762 [EM2820_BOARD_TERRATEC_CINERGY_250] = { 763 .name = "Terratec Cinergy 250 USB", 764 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 765 .has_ir_i2c = 1, 766 .tda9887_conf = TDA9887_PRESENT, 767 .decoder = EM28XX_SAA711X, 768 .input = { { 769 .type = EM28XX_VMUX_TELEVISION, 770 .vmux = SAA7115_COMPOSITE2, 771 .amux = EM28XX_AMUX_VIDEO, 772 }, { 773 .type = EM28XX_VMUX_COMPOSITE, 774 .vmux = SAA7115_COMPOSITE0, 775 .amux = EM28XX_AMUX_LINE_IN, 776 }, { 777 .type = EM28XX_VMUX_SVIDEO, 778 .vmux = SAA7115_SVIDEO3, 779 .amux = EM28XX_AMUX_LINE_IN, 780 } }, 781 }, 782 [EM2820_BOARD_PINNACLE_USB_2] = { 783 .name = "Pinnacle PCTV USB 2", 784 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 785 .has_ir_i2c = 1, 786 .tda9887_conf = TDA9887_PRESENT, 787 .decoder = EM28XX_SAA711X, 788 .input = { { 789 .type = EM28XX_VMUX_TELEVISION, 790 .vmux = SAA7115_COMPOSITE2, 791 .amux = EM28XX_AMUX_VIDEO, 792 }, { 793 .type = EM28XX_VMUX_COMPOSITE, 794 .vmux = SAA7115_COMPOSITE0, 795 .amux = EM28XX_AMUX_LINE_IN, 796 }, { 797 .type = EM28XX_VMUX_SVIDEO, 798 .vmux = SAA7115_SVIDEO3, 799 .amux = EM28XX_AMUX_LINE_IN, 800 } }, 801 }, 802 [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = { 803 .name = "Hauppauge WinTV USB 2", 804 .tuner_type = TUNER_PHILIPS_FM1236_MK3, 805 .tda9887_conf = TDA9887_PRESENT | 806 TDA9887_PORT1_ACTIVE | 807 TDA9887_PORT2_ACTIVE, 808 .decoder = EM28XX_TVP5150, 809 .has_msp34xx = 1, 810 .has_ir_i2c = 1, 811 .input = { { 812 .type = EM28XX_VMUX_TELEVISION, 813 .vmux = TVP5150_COMPOSITE0, 814 .amux = MSP_INPUT_DEFAULT, 815 }, { 816 .type = EM28XX_VMUX_SVIDEO, 817 .vmux = TVP5150_SVIDEO, 818 .amux = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1, 819 MSP_DSP_IN_SCART, MSP_DSP_IN_SCART), 820 } }, 821 }, 822 [EM2820_BOARD_DLINK_USB_TV] = { 823 .name = "D-Link DUB-T210 TV Tuner", 824 .valid = EM28XX_BOARD_NOT_VALIDATED, 825 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 826 .tda9887_conf = TDA9887_PRESENT, 827 .decoder = EM28XX_SAA711X, 828 .input = { { 829 .type = EM28XX_VMUX_TELEVISION, 830 .vmux = SAA7115_COMPOSITE2, 831 .amux = EM28XX_AMUX_LINE_IN, 832 }, { 833 .type = EM28XX_VMUX_COMPOSITE, 834 .vmux = SAA7115_COMPOSITE0, 835 .amux = EM28XX_AMUX_LINE_IN, 836 }, { 837 .type = EM28XX_VMUX_SVIDEO, 838 .vmux = SAA7115_SVIDEO3, 839 .amux = EM28XX_AMUX_LINE_IN, 840 } }, 841 }, 842 [EM2820_BOARD_HERCULES_SMART_TV_USB2] = { 843 .name = "Hercules Smart TV USB 2.0", 844 .valid = EM28XX_BOARD_NOT_VALIDATED, 845 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 846 .tda9887_conf = TDA9887_PRESENT, 847 .decoder = EM28XX_SAA711X, 848 .input = { { 849 .type = EM28XX_VMUX_TELEVISION, 850 .vmux = SAA7115_COMPOSITE2, 851 .amux = EM28XX_AMUX_LINE_IN, 852 }, { 853 .type = EM28XX_VMUX_COMPOSITE, 854 .vmux = SAA7115_COMPOSITE0, 855 .amux = EM28XX_AMUX_LINE_IN, 856 }, { 857 .type = EM28XX_VMUX_SVIDEO, 858 .vmux = SAA7115_SVIDEO3, 859 .amux = EM28XX_AMUX_LINE_IN, 860 } }, 861 }, 862 [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = { 863 .name = "Pinnacle PCTV USB 2 (Philips FM1216ME)", 864 .valid = EM28XX_BOARD_NOT_VALIDATED, 865 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, 866 .tda9887_conf = TDA9887_PRESENT, 867 .decoder = EM28XX_SAA711X, 868 .input = { { 869 .type = EM28XX_VMUX_TELEVISION, 870 .vmux = SAA7115_COMPOSITE2, 871 .amux = EM28XX_AMUX_VIDEO, 872 }, { 873 .type = EM28XX_VMUX_COMPOSITE, 874 .vmux = SAA7115_COMPOSITE0, 875 .amux = EM28XX_AMUX_LINE_IN, 876 }, { 877 .type = EM28XX_VMUX_SVIDEO, 878 .vmux = SAA7115_SVIDEO3, 879 .amux = EM28XX_AMUX_LINE_IN, 880 } }, 881 }, 882 [EM2820_BOARD_GADMEI_UTV310] = { 883 .name = "Gadmei UTV310", 884 .valid = EM28XX_BOARD_NOT_VALIDATED, 885 .tuner_type = TUNER_TNF_5335MF, 886 .tda9887_conf = TDA9887_PRESENT, 887 .decoder = EM28XX_SAA711X, 888 .input = { { 889 .type = EM28XX_VMUX_TELEVISION, 890 .vmux = SAA7115_COMPOSITE1, 891 .amux = EM28XX_AMUX_LINE_IN, 892 }, { 893 .type = EM28XX_VMUX_COMPOSITE, 894 .vmux = SAA7115_COMPOSITE0, 895 .amux = EM28XX_AMUX_LINE_IN, 896 }, { 897 .type = EM28XX_VMUX_SVIDEO, 898 .vmux = SAA7115_SVIDEO3, 899 .amux = EM28XX_AMUX_LINE_IN, 900 } }, 901 }, 902 [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = { 903 .name = "Leadtek Winfast USB II Deluxe", 904 .valid = EM28XX_BOARD_NOT_VALIDATED, 905 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, 906 .has_ir_i2c = 1, 907 .tvaudio_addr = 0x58, 908 .tda9887_conf = TDA9887_PRESENT | 909 TDA9887_PORT2_ACTIVE | 910 TDA9887_QSS, 911 .decoder = EM28XX_SAA711X, 912 .adecoder = EM28XX_TVAUDIO, 913 .input = { { 914 .type = EM28XX_VMUX_TELEVISION, 915 .vmux = SAA7115_COMPOSITE4, 916 .amux = EM28XX_AMUX_AUX, 917 }, { 918 .type = EM28XX_VMUX_COMPOSITE, 919 .vmux = SAA7115_COMPOSITE5, 920 .amux = EM28XX_AMUX_LINE_IN, 921 }, { 922 .type = EM28XX_VMUX_SVIDEO, 923 .vmux = SAA7115_SVIDEO3, 924 .amux = EM28XX_AMUX_LINE_IN, 925 } }, 926 .radio = { 927 .type = EM28XX_RADIO, 928 .amux = EM28XX_AMUX_AUX, 929 } 930 }, 931 [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = { 932 .name = "Videology 20K14XUSB USB2.0", 933 .valid = EM28XX_BOARD_NOT_VALIDATED, 934 .tuner_type = TUNER_ABSENT, 935 .is_webcam = 1, 936 .input = { { 937 .type = EM28XX_VMUX_COMPOSITE, 938 .vmux = 0, 939 .amux = EM28XX_AMUX_VIDEO, 940 } }, 941 }, 942 [EM2820_BOARD_SILVERCREST_WEBCAM] = { 943 .name = "Silvercrest Webcam 1.3mpix", 944 .tuner_type = TUNER_ABSENT, 945 .is_webcam = 1, 946 .input = { { 947 .type = EM28XX_VMUX_COMPOSITE, 948 .vmux = 0, 949 .amux = EM28XX_AMUX_VIDEO, 950 .gpio = silvercrest_reg_seq, 951 } }, 952 }, 953 [EM2821_BOARD_SUPERCOMP_USB_2] = { 954 .name = "Supercomp USB 2.0 TV", 955 .valid = EM28XX_BOARD_NOT_VALIDATED, 956 .tuner_type = TUNER_PHILIPS_FM1236_MK3, 957 .tda9887_conf = TDA9887_PRESENT | 958 TDA9887_PORT1_ACTIVE | 959 TDA9887_PORT2_ACTIVE, 960 .decoder = EM28XX_SAA711X, 961 .input = { { 962 .type = EM28XX_VMUX_TELEVISION, 963 .vmux = SAA7115_COMPOSITE2, 964 .amux = EM28XX_AMUX_LINE_IN, 965 }, { 966 .type = EM28XX_VMUX_COMPOSITE, 967 .vmux = SAA7115_COMPOSITE0, 968 .amux = EM28XX_AMUX_VIDEO, 969 }, { 970 .type = EM28XX_VMUX_SVIDEO, 971 .vmux = SAA7115_SVIDEO3, 972 .amux = EM28XX_AMUX_LINE_IN, 973 } }, 974 }, 975 [EM2821_BOARD_USBGEAR_VD204] = { 976 .name = "Usbgear VD204v9", 977 .valid = EM28XX_BOARD_NOT_VALIDATED, 978 .tuner_type = TUNER_ABSENT, /* Capture only device */ 979 .decoder = EM28XX_SAA711X, 980 .input = { { 981 .type = EM28XX_VMUX_COMPOSITE, 982 .vmux = SAA7115_COMPOSITE0, 983 .amux = EM28XX_AMUX_LINE_IN, 984 }, { 985 .type = EM28XX_VMUX_SVIDEO, 986 .vmux = SAA7115_SVIDEO3, 987 .amux = EM28XX_AMUX_LINE_IN, 988 } }, 989 }, 990 [EM2860_BOARD_NETGMBH_CAM] = { 991 /* Beijing Huaqi Information Digital Technology Co., Ltd */ 992 .name = "NetGMBH Cam", 993 .valid = EM28XX_BOARD_NOT_VALIDATED, 994 .tuner_type = TUNER_ABSENT, 995 .is_webcam = 1, 996 .input = { { 997 .type = EM28XX_VMUX_COMPOSITE, 998 .vmux = 0, 999 .amux = EM28XX_AMUX_VIDEO, 1000 } }, 1001 }, 1002 [EM2860_BOARD_TYPHOON_DVD_MAKER] = { 1003 .name = "Typhoon DVD Maker", 1004 .decoder = EM28XX_SAA711X, 1005 .tuner_type = TUNER_ABSENT, /* Capture only device */ 1006 .input = { { 1007 .type = EM28XX_VMUX_COMPOSITE, 1008 .vmux = SAA7115_COMPOSITE0, 1009 .amux = EM28XX_AMUX_LINE_IN, 1010 }, { 1011 .type = EM28XX_VMUX_SVIDEO, 1012 .vmux = SAA7115_SVIDEO3, 1013 .amux = EM28XX_AMUX_LINE_IN, 1014 } }, 1015 }, 1016 [EM2860_BOARD_GADMEI_UTV330] = { 1017 .name = "Gadmei UTV330", 1018 .valid = EM28XX_BOARD_NOT_VALIDATED, 1019 .tuner_type = TUNER_TNF_5335MF, 1020 .tda9887_conf = TDA9887_PRESENT, 1021 .decoder = EM28XX_SAA711X, 1022 .input = { { 1023 .type = EM28XX_VMUX_TELEVISION, 1024 .vmux = SAA7115_COMPOSITE2, 1025 .amux = EM28XX_AMUX_VIDEO, 1026 }, { 1027 .type = EM28XX_VMUX_COMPOSITE, 1028 .vmux = SAA7115_COMPOSITE0, 1029 .amux = EM28XX_AMUX_LINE_IN, 1030 }, { 1031 .type = EM28XX_VMUX_SVIDEO, 1032 .vmux = SAA7115_SVIDEO3, 1033 .amux = EM28XX_AMUX_LINE_IN, 1034 } }, 1035 }, 1036 [EM2861_BOARD_GADMEI_UTV330PLUS] = { 1037 .name = "Gadmei UTV330+", 1038 .tuner_type = TUNER_TNF_5335MF, 1039 .tda9887_conf = TDA9887_PRESENT, 1040 .ir_codes = RC_MAP_GADMEI_RM008Z, 1041 .decoder = EM28XX_SAA711X, 1042 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 1043 .input = { { 1044 .type = EM28XX_VMUX_TELEVISION, 1045 .vmux = SAA7115_COMPOSITE2, 1046 .amux = EM28XX_AMUX_VIDEO, 1047 }, { 1048 .type = EM28XX_VMUX_COMPOSITE, 1049 .vmux = SAA7115_COMPOSITE0, 1050 .amux = EM28XX_AMUX_LINE_IN, 1051 }, { 1052 .type = EM28XX_VMUX_SVIDEO, 1053 .vmux = SAA7115_SVIDEO3, 1054 .amux = EM28XX_AMUX_LINE_IN, 1055 } }, 1056 }, 1057 [EM2860_BOARD_TERRATEC_HYBRID_XS] = { 1058 .name = "Terratec Cinergy A Hybrid XS", 1059 .valid = EM28XX_BOARD_NOT_VALIDATED, 1060 .tuner_type = TUNER_XC2028, 1061 .tuner_gpio = default_tuner_gpio, 1062 .decoder = EM28XX_TVP5150, 1063 1064 .input = { { 1065 .type = EM28XX_VMUX_TELEVISION, 1066 .vmux = TVP5150_COMPOSITE0, 1067 .amux = EM28XX_AMUX_VIDEO, 1068 .gpio = hauppauge_wintv_hvr_900_analog, 1069 }, { 1070 .type = EM28XX_VMUX_COMPOSITE, 1071 .vmux = TVP5150_COMPOSITE1, 1072 .amux = EM28XX_AMUX_LINE_IN, 1073 .gpio = hauppauge_wintv_hvr_900_analog, 1074 }, { 1075 .type = EM28XX_VMUX_SVIDEO, 1076 .vmux = TVP5150_SVIDEO, 1077 .amux = EM28XX_AMUX_LINE_IN, 1078 .gpio = hauppauge_wintv_hvr_900_analog, 1079 } }, 1080 }, 1081 [EM2861_BOARD_KWORLD_PVRTV_300U] = { 1082 .name = "KWorld PVRTV 300U", 1083 .valid = EM28XX_BOARD_NOT_VALIDATED, 1084 .tuner_type = TUNER_XC2028, 1085 .tuner_gpio = default_tuner_gpio, 1086 .decoder = EM28XX_TVP5150, 1087 .input = { { 1088 .type = EM28XX_VMUX_TELEVISION, 1089 .vmux = TVP5150_COMPOSITE0, 1090 .amux = EM28XX_AMUX_VIDEO, 1091 }, { 1092 .type = EM28XX_VMUX_COMPOSITE, 1093 .vmux = TVP5150_COMPOSITE1, 1094 .amux = EM28XX_AMUX_LINE_IN, 1095 }, { 1096 .type = EM28XX_VMUX_SVIDEO, 1097 .vmux = TVP5150_SVIDEO, 1098 .amux = EM28XX_AMUX_LINE_IN, 1099 } }, 1100 }, 1101 [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = { 1102 .name = "Yakumo MovieMixer", 1103 .tuner_type = TUNER_ABSENT, /* Capture only device */ 1104 .decoder = EM28XX_TVP5150, 1105 .input = { { 1106 .type = EM28XX_VMUX_TELEVISION, 1107 .vmux = TVP5150_COMPOSITE0, 1108 .amux = EM28XX_AMUX_VIDEO, 1109 }, { 1110 .type = EM28XX_VMUX_COMPOSITE, 1111 .vmux = TVP5150_COMPOSITE1, 1112 .amux = EM28XX_AMUX_LINE_IN, 1113 }, { 1114 .type = EM28XX_VMUX_SVIDEO, 1115 .vmux = TVP5150_SVIDEO, 1116 .amux = EM28XX_AMUX_LINE_IN, 1117 } }, 1118 }, 1119 [EM2860_BOARD_TVP5150_REFERENCE_DESIGN] = { 1120 .name = "EM2860/TVP5150 Reference Design", 1121 .tuner_type = TUNER_ABSENT, /* Capture only device */ 1122 .decoder = EM28XX_TVP5150, 1123 .input = { { 1124 .type = EM28XX_VMUX_COMPOSITE, 1125 .vmux = TVP5150_COMPOSITE1, 1126 .amux = EM28XX_AMUX_LINE_IN, 1127 }, { 1128 .type = EM28XX_VMUX_SVIDEO, 1129 .vmux = TVP5150_SVIDEO, 1130 .amux = EM28XX_AMUX_LINE_IN, 1131 } }, 1132 }, 1133 [EM2861_BOARD_PLEXTOR_PX_TV100U] = { 1134 .name = "Plextor ConvertX PX-TV100U", 1135 .tuner_type = TUNER_TNF_5335MF, 1136 .xclk = EM28XX_XCLK_I2S_MSB_TIMING | 1137 EM28XX_XCLK_FREQUENCY_12MHZ, 1138 .tda9887_conf = TDA9887_PRESENT, 1139 .decoder = EM28XX_TVP5150, 1140 .has_msp34xx = 1, 1141 .input = { { 1142 .type = EM28XX_VMUX_TELEVISION, 1143 .vmux = TVP5150_COMPOSITE0, 1144 .amux = EM28XX_AMUX_LINE_IN, 1145 .gpio = pinnacle_hybrid_pro_analog, 1146 }, { 1147 .type = EM28XX_VMUX_COMPOSITE, 1148 .vmux = TVP5150_COMPOSITE1, 1149 .amux = EM28XX_AMUX_LINE_IN, 1150 .gpio = pinnacle_hybrid_pro_analog, 1151 }, { 1152 .type = EM28XX_VMUX_SVIDEO, 1153 .vmux = TVP5150_SVIDEO, 1154 .amux = EM28XX_AMUX_LINE_IN, 1155 .gpio = pinnacle_hybrid_pro_analog, 1156 } }, 1157 }, 1158 1159 /* Those boards with em2870 are DVB Only*/ 1160 1161 [EM2870_BOARD_TERRATEC_XS] = { 1162 .name = "Terratec Cinergy T XS", 1163 .valid = EM28XX_BOARD_NOT_VALIDATED, 1164 .tuner_type = TUNER_XC2028, 1165 .tuner_gpio = default_tuner_gpio, 1166 }, 1167 [EM2870_BOARD_TERRATEC_XS_MT2060] = { 1168 .name = "Terratec Cinergy T XS (MT2060)", 1169 .xclk = EM28XX_XCLK_IR_RC5_MODE | 1170 EM28XX_XCLK_FREQUENCY_12MHZ, 1171 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, 1172 .tuner_type = TUNER_ABSENT, /* MT2060 */ 1173 .has_dvb = 1, 1174 .tuner_gpio = default_tuner_gpio, 1175 }, 1176 [EM2870_BOARD_KWORLD_350U] = { 1177 .name = "Kworld 350 U DVB-T", 1178 .valid = EM28XX_BOARD_NOT_VALIDATED, 1179 .tuner_type = TUNER_XC2028, 1180 .tuner_gpio = default_tuner_gpio, 1181 }, 1182 [EM2870_BOARD_KWORLD_355U] = { 1183 .name = "Kworld 355 U DVB-T", 1184 .valid = EM28XX_BOARD_NOT_VALIDATED, 1185 .tuner_type = TUNER_ABSENT, 1186 .tuner_gpio = default_tuner_gpio, 1187 .has_dvb = 1, 1188 .dvb_gpio = default_digital, 1189 }, 1190 [EM2870_BOARD_PINNACLE_PCTV_DVB] = { 1191 .name = "Pinnacle PCTV DVB-T", 1192 .valid = EM28XX_BOARD_NOT_VALIDATED, 1193 .tuner_type = TUNER_ABSENT, /* MT2060 */ 1194 /* djh - I have serious doubts this is right... */ 1195 .xclk = EM28XX_XCLK_IR_RC5_MODE | 1196 EM28XX_XCLK_FREQUENCY_10MHZ, 1197 }, 1198 [EM2870_BOARD_COMPRO_VIDEOMATE] = { 1199 .name = "Compro, VideoMate U3", 1200 .valid = EM28XX_BOARD_NOT_VALIDATED, 1201 .tuner_type = TUNER_ABSENT, /* MT2060 */ 1202 }, 1203 1204 [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = { 1205 .name = "Terratec Hybrid XS Secam", 1206 .has_msp34xx = 1, 1207 .tuner_type = TUNER_XC2028, 1208 .tuner_gpio = default_tuner_gpio, 1209 .decoder = EM28XX_TVP5150, 1210 .has_dvb = 1, 1211 .dvb_gpio = terratec_cinergy_USB_XS_FR_digital, 1212 .input = { { 1213 .type = EM28XX_VMUX_TELEVISION, 1214 .vmux = TVP5150_COMPOSITE0, 1215 .amux = EM28XX_AMUX_VIDEO, 1216 .gpio = terratec_cinergy_USB_XS_FR_analog, 1217 }, { 1218 .type = EM28XX_VMUX_COMPOSITE, 1219 .vmux = TVP5150_COMPOSITE1, 1220 .amux = EM28XX_AMUX_LINE_IN, 1221 .gpio = terratec_cinergy_USB_XS_FR_analog, 1222 }, { 1223 .type = EM28XX_VMUX_SVIDEO, 1224 .vmux = TVP5150_SVIDEO, 1225 .amux = EM28XX_AMUX_LINE_IN, 1226 .gpio = terratec_cinergy_USB_XS_FR_analog, 1227 } }, 1228 }, 1229 [EM2884_BOARD_TERRATEC_H5] = { 1230 .name = "Terratec Cinergy H5", 1231 .has_dvb = 1, 1232#if 0 1233 .tuner_type = TUNER_PHILIPS_TDA8290, 1234 .tuner_addr = 0x41, 1235 .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */ 1236 .tuner_gpio = terratec_h5_gpio, 1237#else 1238 .tuner_type = TUNER_ABSENT, 1239#endif 1240 .def_i2c_bus = 1, 1241 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1242 EM28XX_I2C_FREQ_400_KHZ, 1243 }, 1244 [EM2884_BOARD_TERRATEC_H6] = { 1245 .name = "Terratec Cinergy H6 rev. 2", 1246 .has_dvb = 1, 1247 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, 1248#if 0 1249 .tuner_type = TUNER_PHILIPS_TDA8290, 1250 .tuner_addr = 0x41, 1251 .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */ 1252 .tuner_gpio = terratec_h5_gpio, 1253#else 1254 .tuner_type = TUNER_ABSENT, 1255#endif 1256 .def_i2c_bus = 1, 1257 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1258 EM28XX_I2C_FREQ_400_KHZ, 1259 }, 1260 [EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C] = { 1261 .name = "Hauppauge WinTV HVR 930C", 1262 .has_dvb = 1, 1263#if 0 /* FIXME: Add analog support */ 1264 .tuner_type = TUNER_XC5000, 1265 .tuner_addr = 0x41, 1266 .dvb_gpio = hauppauge_930c_digital, 1267 .tuner_gpio = hauppauge_930c_gpio, 1268#else 1269 .tuner_type = TUNER_ABSENT, 1270#endif 1271 .ir_codes = RC_MAP_HAUPPAUGE, 1272 .def_i2c_bus = 1, 1273 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1274 EM28XX_I2C_FREQ_400_KHZ, 1275 }, 1276 [EM2884_BOARD_C3TECH_DIGITAL_DUO] = { 1277 .name = "C3 Tech Digital Duo HDTV/SDTV USB", 1278 .has_dvb = 1, 1279 /* FIXME: Add analog support - need a saa7136 driver */ 1280 .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */ 1281 .ir_codes = RC_MAP_EMPTY, 1282 .def_i2c_bus = 1, 1283 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, 1284 .dvb_gpio = c3tech_digital_duo_digital, 1285 }, 1286 [EM2884_BOARD_CINERGY_HTC_STICK] = { 1287 .name = "Terratec Cinergy HTC Stick", 1288 .has_dvb = 1, 1289 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, 1290 .tuner_type = TUNER_ABSENT, 1291 .def_i2c_bus = 1, 1292 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1293 EM28XX_I2C_FREQ_400_KHZ, 1294 }, 1295 [EM2884_BOARD_ELGATO_EYETV_HYBRID_2008] = { 1296 .name = "Elgato EyeTV Hybrid 2008 INT", 1297 .has_dvb = 1, 1298 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, 1299 .tuner_type = TUNER_ABSENT, 1300 .def_i2c_bus = 1, 1301 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1302 EM28XX_I2C_FREQ_400_KHZ, 1303 }, 1304 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = { 1305 .name = "Hauppauge WinTV HVR 900", 1306 .tda9887_conf = TDA9887_PRESENT, 1307 .tuner_type = TUNER_XC2028, 1308 .tuner_gpio = default_tuner_gpio, 1309 .mts_firmware = 1, 1310 .has_dvb = 1, 1311 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1312 .ir_codes = RC_MAP_HAUPPAUGE, 1313 .decoder = EM28XX_TVP5150, 1314 .input = { { 1315 .type = EM28XX_VMUX_TELEVISION, 1316 .vmux = TVP5150_COMPOSITE0, 1317 .amux = EM28XX_AMUX_VIDEO, 1318 .gpio = hauppauge_wintv_hvr_900_analog, 1319 }, { 1320 .type = EM28XX_VMUX_COMPOSITE, 1321 .vmux = TVP5150_COMPOSITE1, 1322 .amux = EM28XX_AMUX_LINE_IN, 1323 .gpio = hauppauge_wintv_hvr_900_analog, 1324 }, { 1325 .type = EM28XX_VMUX_SVIDEO, 1326 .vmux = TVP5150_SVIDEO, 1327 .amux = EM28XX_AMUX_LINE_IN, 1328 .gpio = hauppauge_wintv_hvr_900_analog, 1329 } }, 1330 }, 1331 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = { 1332 .name = "Hauppauge WinTV HVR 900 (R2)", 1333 .tda9887_conf = TDA9887_PRESENT, 1334 .tuner_type = TUNER_XC2028, 1335 .tuner_gpio = default_tuner_gpio, 1336 .mts_firmware = 1, 1337 .has_dvb = 1, 1338 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital, 1339 .ir_codes = RC_MAP_HAUPPAUGE, 1340 .decoder = EM28XX_TVP5150, 1341 .input = { { 1342 .type = EM28XX_VMUX_TELEVISION, 1343 .vmux = TVP5150_COMPOSITE0, 1344 .amux = EM28XX_AMUX_VIDEO, 1345 .gpio = hauppauge_wintv_hvr_900_analog, 1346 }, { 1347 .type = EM28XX_VMUX_COMPOSITE, 1348 .vmux = TVP5150_COMPOSITE1, 1349 .amux = EM28XX_AMUX_LINE_IN, 1350 .gpio = hauppauge_wintv_hvr_900_analog, 1351 }, { 1352 .type = EM28XX_VMUX_SVIDEO, 1353 .vmux = TVP5150_SVIDEO, 1354 .amux = EM28XX_AMUX_LINE_IN, 1355 .gpio = hauppauge_wintv_hvr_900_analog, 1356 } }, 1357 }, 1358 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = { 1359 .name = "Hauppauge WinTV HVR 850", 1360 .tuner_type = TUNER_XC2028, 1361 .tuner_gpio = default_tuner_gpio, 1362 .mts_firmware = 1, 1363 .has_dvb = 1, 1364 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1365 .ir_codes = RC_MAP_HAUPPAUGE, 1366 .decoder = EM28XX_TVP5150, 1367 .input = { { 1368 .type = EM28XX_VMUX_TELEVISION, 1369 .vmux = TVP5150_COMPOSITE0, 1370 .amux = EM28XX_AMUX_VIDEO, 1371 .gpio = hauppauge_wintv_hvr_900_analog, 1372 }, { 1373 .type = EM28XX_VMUX_COMPOSITE, 1374 .vmux = TVP5150_COMPOSITE1, 1375 .amux = EM28XX_AMUX_LINE_IN, 1376 .gpio = hauppauge_wintv_hvr_900_analog, 1377 }, { 1378 .type = EM28XX_VMUX_SVIDEO, 1379 .vmux = TVP5150_SVIDEO, 1380 .amux = EM28XX_AMUX_LINE_IN, 1381 .gpio = hauppauge_wintv_hvr_900_analog, 1382 } }, 1383 }, 1384 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = { 1385 .name = "Hauppauge WinTV HVR 950", 1386 .tuner_type = TUNER_XC2028, 1387 .tuner_gpio = default_tuner_gpio, 1388 .mts_firmware = 1, 1389 .has_dvb = 1, 1390 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1391 .ir_codes = RC_MAP_HAUPPAUGE, 1392 .decoder = EM28XX_TVP5150, 1393 .input = { { 1394 .type = EM28XX_VMUX_TELEVISION, 1395 .vmux = TVP5150_COMPOSITE0, 1396 .amux = EM28XX_AMUX_VIDEO, 1397 .gpio = hauppauge_wintv_hvr_900_analog, 1398 }, { 1399 .type = EM28XX_VMUX_COMPOSITE, 1400 .vmux = TVP5150_COMPOSITE1, 1401 .amux = EM28XX_AMUX_LINE_IN, 1402 .gpio = hauppauge_wintv_hvr_900_analog, 1403 }, { 1404 .type = EM28XX_VMUX_SVIDEO, 1405 .vmux = TVP5150_SVIDEO, 1406 .amux = EM28XX_AMUX_LINE_IN, 1407 .gpio = hauppauge_wintv_hvr_900_analog, 1408 } }, 1409 }, 1410 [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = { 1411 .name = "Pinnacle PCTV HD Pro Stick", 1412 .tuner_type = TUNER_XC2028, 1413 .tuner_gpio = default_tuner_gpio, 1414 .mts_firmware = 1, 1415 .has_dvb = 1, 1416 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1417 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 1418 .decoder = EM28XX_TVP5150, 1419 .input = { { 1420 .type = EM28XX_VMUX_TELEVISION, 1421 .vmux = TVP5150_COMPOSITE0, 1422 .amux = EM28XX_AMUX_VIDEO, 1423 .gpio = hauppauge_wintv_hvr_900_analog, 1424 }, { 1425 .type = EM28XX_VMUX_COMPOSITE, 1426 .vmux = TVP5150_COMPOSITE1, 1427 .amux = EM28XX_AMUX_LINE_IN, 1428 .gpio = hauppauge_wintv_hvr_900_analog, 1429 }, { 1430 .type = EM28XX_VMUX_SVIDEO, 1431 .vmux = TVP5150_SVIDEO, 1432 .amux = EM28XX_AMUX_LINE_IN, 1433 .gpio = hauppauge_wintv_hvr_900_analog, 1434 } }, 1435 }, 1436 [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = { 1437 .name = "AMD ATI TV Wonder HD 600", 1438 .tuner_type = TUNER_XC2028, 1439 .tuner_gpio = default_tuner_gpio, 1440 .mts_firmware = 1, 1441 .has_dvb = 1, 1442 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1443 .ir_codes = RC_MAP_ATI_TV_WONDER_HD_600, 1444 .decoder = EM28XX_TVP5150, 1445 .input = { { 1446 .type = EM28XX_VMUX_TELEVISION, 1447 .vmux = TVP5150_COMPOSITE0, 1448 .amux = EM28XX_AMUX_VIDEO, 1449 .gpio = hauppauge_wintv_hvr_900_analog, 1450 }, { 1451 .type = EM28XX_VMUX_COMPOSITE, 1452 .vmux = TVP5150_COMPOSITE1, 1453 .amux = EM28XX_AMUX_LINE_IN, 1454 .gpio = hauppauge_wintv_hvr_900_analog, 1455 }, { 1456 .type = EM28XX_VMUX_SVIDEO, 1457 .vmux = TVP5150_SVIDEO, 1458 .amux = EM28XX_AMUX_LINE_IN, 1459 .gpio = hauppauge_wintv_hvr_900_analog, 1460 } }, 1461 }, 1462 [EM2880_BOARD_TERRATEC_HYBRID_XS] = { 1463 .name = "Terratec Hybrid XS", 1464 .tuner_type = TUNER_XC2028, 1465 .tuner_gpio = default_tuner_gpio, 1466 .decoder = EM28XX_TVP5150, 1467 .has_dvb = 1, 1468 .dvb_gpio = default_digital, 1469 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS, 1470 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ 1471 .input = { { 1472 .type = EM28XX_VMUX_TELEVISION, 1473 .vmux = TVP5150_COMPOSITE0, 1474 .amux = EM28XX_AMUX_VIDEO, 1475 .gpio = default_analog, 1476 }, { 1477 .type = EM28XX_VMUX_COMPOSITE, 1478 .vmux = TVP5150_COMPOSITE1, 1479 .amux = EM28XX_AMUX_LINE_IN, 1480 .gpio = default_analog, 1481 }, { 1482 .type = EM28XX_VMUX_SVIDEO, 1483 .vmux = TVP5150_SVIDEO, 1484 .amux = EM28XX_AMUX_LINE_IN, 1485 .gpio = default_analog, 1486 } }, 1487 }, 1488 /* 1489 * maybe there's a reason behind it why Terratec sells the Hybrid XS 1490 * as Prodigy XS with a different PID, let's keep it separated for now 1491 * maybe we'll need it later on 1492 */ 1493 [EM2880_BOARD_TERRATEC_PRODIGY_XS] = { 1494 .name = "Terratec Prodigy XS", 1495 .tuner_type = TUNER_XC2028, 1496 .tuner_gpio = default_tuner_gpio, 1497 .decoder = EM28XX_TVP5150, 1498 .input = { { 1499 .type = EM28XX_VMUX_TELEVISION, 1500 .vmux = TVP5150_COMPOSITE0, 1501 .amux = EM28XX_AMUX_VIDEO, 1502 .gpio = hauppauge_wintv_hvr_900_analog, 1503 }, { 1504 .type = EM28XX_VMUX_COMPOSITE, 1505 .vmux = TVP5150_COMPOSITE1, 1506 .amux = EM28XX_AMUX_LINE_IN, 1507 .gpio = hauppauge_wintv_hvr_900_analog, 1508 }, { 1509 .type = EM28XX_VMUX_SVIDEO, 1510 .vmux = TVP5150_SVIDEO, 1511 .amux = EM28XX_AMUX_LINE_IN, 1512 .gpio = hauppauge_wintv_hvr_900_analog, 1513 } }, 1514 }, 1515 [EM2820_BOARD_MSI_VOX_USB_2] = { 1516 .name = "MSI VOX USB 2.0", 1517 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1518 .tda9887_conf = TDA9887_PRESENT | 1519 TDA9887_PORT1_ACTIVE | 1520 TDA9887_PORT2_ACTIVE, 1521 .max_range_640_480 = 1, 1522 .decoder = EM28XX_SAA711X, 1523 .input = { { 1524 .type = EM28XX_VMUX_TELEVISION, 1525 .vmux = SAA7115_COMPOSITE4, 1526 .amux = EM28XX_AMUX_VIDEO, 1527 }, { 1528 .type = EM28XX_VMUX_COMPOSITE, 1529 .vmux = SAA7115_COMPOSITE0, 1530 .amux = EM28XX_AMUX_LINE_IN, 1531 }, { 1532 .type = EM28XX_VMUX_SVIDEO, 1533 .vmux = SAA7115_SVIDEO3, 1534 .amux = EM28XX_AMUX_LINE_IN, 1535 } }, 1536 }, 1537 [EM2800_BOARD_TERRATEC_CINERGY_200] = { 1538 .name = "Terratec Cinergy 200 USB", 1539 .is_em2800 = 1, 1540 .has_ir_i2c = 1, 1541 .tuner_type = TUNER_LG_TALN, 1542 .tda9887_conf = TDA9887_PRESENT, 1543 .decoder = EM28XX_SAA711X, 1544 .input = { { 1545 .type = EM28XX_VMUX_TELEVISION, 1546 .vmux = SAA7115_COMPOSITE2, 1547 .amux = EM28XX_AMUX_VIDEO, 1548 }, { 1549 .type = EM28XX_VMUX_COMPOSITE, 1550 .vmux = SAA7115_COMPOSITE0, 1551 .amux = EM28XX_AMUX_LINE_IN, 1552 }, { 1553 .type = EM28XX_VMUX_SVIDEO, 1554 .vmux = SAA7115_SVIDEO3, 1555 .amux = EM28XX_AMUX_LINE_IN, 1556 } }, 1557 }, 1558 [EM2800_BOARD_GRABBEEX_USB2800] = { 1559 .name = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder", 1560 .is_em2800 = 1, 1561 .decoder = EM28XX_SAA711X, 1562 .tuner_type = TUNER_ABSENT, /* capture only board */ 1563 .input = { { 1564 .type = EM28XX_VMUX_COMPOSITE, 1565 .vmux = SAA7115_COMPOSITE0, 1566 .amux = EM28XX_AMUX_LINE_IN, 1567 }, { 1568 .type = EM28XX_VMUX_SVIDEO, 1569 .vmux = SAA7115_SVIDEO3, 1570 .amux = EM28XX_AMUX_LINE_IN, 1571 } }, 1572 }, 1573 [EM2800_BOARD_VC211A] = { 1574 .name = "Actionmaster/LinXcel/Digitus VC211A", 1575 .is_em2800 = 1, 1576 .tuner_type = TUNER_ABSENT, /* Capture-only board */ 1577 .decoder = EM28XX_SAA711X, 1578 .input = { { 1579 .type = EM28XX_VMUX_COMPOSITE, 1580 .vmux = SAA7115_COMPOSITE0, 1581 .amux = EM28XX_AMUX_LINE_IN, 1582 .gpio = vc211a_enable, 1583 }, { 1584 .type = EM28XX_VMUX_SVIDEO, 1585 .vmux = SAA7115_SVIDEO3, 1586 .amux = EM28XX_AMUX_LINE_IN, 1587 .gpio = vc211a_enable, 1588 } }, 1589 }, 1590 [EM2800_BOARD_LEADTEK_WINFAST_USBII] = { 1591 .name = "Leadtek Winfast USB II", 1592 .is_em2800 = 1, 1593 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1594 .tda9887_conf = TDA9887_PRESENT, 1595 .decoder = EM28XX_SAA711X, 1596 .input = { { 1597 .type = EM28XX_VMUX_TELEVISION, 1598 .vmux = SAA7115_COMPOSITE2, 1599 .amux = EM28XX_AMUX_VIDEO, 1600 }, { 1601 .type = EM28XX_VMUX_COMPOSITE, 1602 .vmux = SAA7115_COMPOSITE0, 1603 .amux = EM28XX_AMUX_LINE_IN, 1604 }, { 1605 .type = EM28XX_VMUX_SVIDEO, 1606 .vmux = SAA7115_SVIDEO3, 1607 .amux = EM28XX_AMUX_LINE_IN, 1608 } }, 1609 }, 1610 [EM2800_BOARD_KWORLD_USB2800] = { 1611 .name = "Kworld USB2800", 1612 .is_em2800 = 1, 1613 .tuner_type = TUNER_PHILIPS_FCV1236D, 1614 .tda9887_conf = TDA9887_PRESENT, 1615 .decoder = EM28XX_SAA711X, 1616 .input = { { 1617 .type = EM28XX_VMUX_TELEVISION, 1618 .vmux = SAA7115_COMPOSITE2, 1619 .amux = EM28XX_AMUX_VIDEO, 1620 }, { 1621 .type = EM28XX_VMUX_COMPOSITE, 1622 .vmux = SAA7115_COMPOSITE0, 1623 .amux = EM28XX_AMUX_LINE_IN, 1624 }, { 1625 .type = EM28XX_VMUX_SVIDEO, 1626 .vmux = SAA7115_SVIDEO3, 1627 .amux = EM28XX_AMUX_LINE_IN, 1628 } }, 1629 }, 1630 [EM2820_BOARD_PINNACLE_DVC_90] = { 1631 .name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker / Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U", 1632 .tuner_type = TUNER_ABSENT, /* capture only board */ 1633 .decoder = EM28XX_SAA711X, 1634 .input = { { 1635 .type = EM28XX_VMUX_COMPOSITE, 1636 .vmux = SAA7115_COMPOSITE0, 1637 .amux = EM28XX_AMUX_LINE_IN, 1638 }, { 1639 .type = EM28XX_VMUX_SVIDEO, 1640 .vmux = SAA7115_SVIDEO3, 1641 .amux = EM28XX_AMUX_LINE_IN, 1642 } }, 1643 }, 1644 [EM2800_BOARD_VGEAR_POCKETTV] = { 1645 .name = "V-Gear PocketTV", 1646 .is_em2800 = 1, 1647 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1648 .tda9887_conf = TDA9887_PRESENT, 1649 .decoder = EM28XX_SAA711X, 1650 .input = { { 1651 .type = EM28XX_VMUX_TELEVISION, 1652 .vmux = SAA7115_COMPOSITE2, 1653 .amux = EM28XX_AMUX_VIDEO, 1654 }, { 1655 .type = EM28XX_VMUX_COMPOSITE, 1656 .vmux = SAA7115_COMPOSITE0, 1657 .amux = EM28XX_AMUX_LINE_IN, 1658 }, { 1659 .type = EM28XX_VMUX_SVIDEO, 1660 .vmux = SAA7115_SVIDEO3, 1661 .amux = EM28XX_AMUX_LINE_IN, 1662 } }, 1663 }, 1664 [EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = { 1665 .name = "Pixelview PlayTV Box 4 USB 2.0", 1666 .tda9887_conf = TDA9887_PRESENT, 1667 .tuner_type = TUNER_YMEC_TVF_5533MF, 1668 .decoder = EM28XX_SAA711X, 1669 .input = { { 1670 .type = EM28XX_VMUX_TELEVISION, 1671 .vmux = SAA7115_COMPOSITE2, 1672 .amux = EM28XX_AMUX_VIDEO, 1673 .aout = EM28XX_AOUT_MONO | /* I2S */ 1674 EM28XX_AOUT_MASTER, /* Line out pin */ 1675 }, { 1676 .type = EM28XX_VMUX_COMPOSITE, 1677 .vmux = SAA7115_COMPOSITE0, 1678 .amux = EM28XX_AMUX_LINE_IN, 1679 }, { 1680 .type = EM28XX_VMUX_SVIDEO, 1681 .vmux = SAA7115_SVIDEO3, 1682 .amux = EM28XX_AMUX_LINE_IN, 1683 } }, 1684 }, 1685 [EM2820_BOARD_PROLINK_PLAYTV_USB2] = { 1686 .name = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0", 1687 .buttons = std_snapshot_button, 1688 .tda9887_conf = TDA9887_PRESENT, 1689 .tuner_type = TUNER_YMEC_TVF_5533MF, 1690 .tuner_addr = 0x60, 1691 .decoder = EM28XX_SAA711X, 1692 .input = { { 1693 .type = EM28XX_VMUX_TELEVISION, 1694 .vmux = SAA7115_COMPOSITE2, 1695 .amux = EM28XX_AMUX_VIDEO, 1696 .aout = EM28XX_AOUT_MONO | /* I2S */ 1697 EM28XX_AOUT_MASTER, /* Line out pin */ 1698 }, { 1699 .type = EM28XX_VMUX_COMPOSITE, 1700 .vmux = SAA7115_COMPOSITE0, 1701 .amux = EM28XX_AMUX_LINE_IN, 1702 }, { 1703 .type = EM28XX_VMUX_SVIDEO, 1704 .vmux = SAA7115_SVIDEO3, 1705 .amux = EM28XX_AMUX_LINE_IN, 1706 } }, 1707 }, 1708 [EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = { 1709 .name = "EM2860/SAA711X Reference Design", 1710 .buttons = std_snapshot_button, 1711 .tuner_type = TUNER_ABSENT, 1712 .decoder = EM28XX_SAA711X, 1713 .input = { { 1714 .type = EM28XX_VMUX_SVIDEO, 1715 .vmux = SAA7115_SVIDEO3, 1716 }, { 1717 .type = EM28XX_VMUX_COMPOSITE, 1718 .vmux = SAA7115_COMPOSITE0, 1719 } }, 1720 }, 1721 1722 [EM2874_BOARD_LEADERSHIP_ISDBT] = { 1723 .def_i2c_bus = 1, 1724 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1725 EM28XX_I2C_FREQ_100_KHZ, 1726 .xclk = EM28XX_XCLK_FREQUENCY_10MHZ, 1727 .name = "EM2874 Leadership ISDBT", 1728 .tuner_type = TUNER_ABSENT, 1729 .tuner_gpio = leadership_reset, 1730 .dvb_gpio = leadership_digital, 1731 .has_dvb = 1, 1732 }, 1733 1734 [EM2880_BOARD_MSI_DIGIVOX_AD] = { 1735 .name = "MSI DigiVox A/D", 1736 .valid = EM28XX_BOARD_NOT_VALIDATED, 1737 .tuner_type = TUNER_XC2028, 1738 .tuner_gpio = default_tuner_gpio, 1739 .decoder = EM28XX_TVP5150, 1740 .input = { { 1741 .type = EM28XX_VMUX_TELEVISION, 1742 .vmux = TVP5150_COMPOSITE0, 1743 .amux = EM28XX_AMUX_VIDEO, 1744 .gpio = em2880_msi_digivox_ad_analog, 1745 }, { 1746 .type = EM28XX_VMUX_COMPOSITE, 1747 .vmux = TVP5150_COMPOSITE1, 1748 .amux = EM28XX_AMUX_LINE_IN, 1749 .gpio = em2880_msi_digivox_ad_analog, 1750 }, { 1751 .type = EM28XX_VMUX_SVIDEO, 1752 .vmux = TVP5150_SVIDEO, 1753 .amux = EM28XX_AMUX_LINE_IN, 1754 .gpio = em2880_msi_digivox_ad_analog, 1755 } }, 1756 }, 1757 [EM2880_BOARD_MSI_DIGIVOX_AD_II] = { 1758 .name = "MSI DigiVox A/D II", 1759 .valid = EM28XX_BOARD_NOT_VALIDATED, 1760 .tuner_type = TUNER_XC2028, 1761 .tuner_gpio = default_tuner_gpio, 1762 .decoder = EM28XX_TVP5150, 1763 .input = { { 1764 .type = EM28XX_VMUX_TELEVISION, 1765 .vmux = TVP5150_COMPOSITE0, 1766 .amux = EM28XX_AMUX_VIDEO, 1767 .gpio = em2880_msi_digivox_ad_analog, 1768 }, { 1769 .type = EM28XX_VMUX_COMPOSITE, 1770 .vmux = TVP5150_COMPOSITE1, 1771 .amux = EM28XX_AMUX_LINE_IN, 1772 .gpio = em2880_msi_digivox_ad_analog, 1773 }, { 1774 .type = EM28XX_VMUX_SVIDEO, 1775 .vmux = TVP5150_SVIDEO, 1776 .amux = EM28XX_AMUX_LINE_IN, 1777 .gpio = em2880_msi_digivox_ad_analog, 1778 } }, 1779 }, 1780 [EM2880_BOARD_KWORLD_DVB_305U] = { 1781 .name = "KWorld DVB-T 305U", 1782 .tuner_type = TUNER_XC2028, 1783 .tuner_gpio = default_tuner_gpio, 1784 .decoder = EM28XX_TVP5150, 1785 .input = { { 1786 .type = EM28XX_VMUX_TELEVISION, 1787 .vmux = TVP5150_COMPOSITE0, 1788 .amux = EM28XX_AMUX_VIDEO, 1789 }, { 1790 .type = EM28XX_VMUX_COMPOSITE, 1791 .vmux = TVP5150_COMPOSITE1, 1792 .amux = EM28XX_AMUX_LINE_IN, 1793 }, { 1794 .type = EM28XX_VMUX_SVIDEO, 1795 .vmux = TVP5150_SVIDEO, 1796 .amux = EM28XX_AMUX_LINE_IN, 1797 } }, 1798 }, 1799 [EM2880_BOARD_KWORLD_DVB_310U] = { 1800 .name = "KWorld DVB-T 310U", 1801 .tuner_type = TUNER_XC2028, 1802 .tuner_gpio = default_tuner_gpio, 1803 .has_dvb = 1, 1804 .dvb_gpio = default_digital, 1805 .mts_firmware = 1, 1806 .decoder = EM28XX_TVP5150, 1807 .input = { { 1808 .type = EM28XX_VMUX_TELEVISION, 1809 .vmux = TVP5150_COMPOSITE0, 1810 .amux = EM28XX_AMUX_VIDEO, 1811 .gpio = default_analog, 1812 }, { 1813 .type = EM28XX_VMUX_COMPOSITE, 1814 .vmux = TVP5150_COMPOSITE1, 1815 .amux = EM28XX_AMUX_LINE_IN, 1816 .gpio = default_analog, 1817 }, { /* S-video has not been tested yet */ 1818 .type = EM28XX_VMUX_SVIDEO, 1819 .vmux = TVP5150_SVIDEO, 1820 .amux = EM28XX_AMUX_LINE_IN, 1821 .gpio = default_analog, 1822 } }, 1823 }, 1824 [EM2882_BOARD_KWORLD_ATSC_315U] = { 1825 .name = "KWorld ATSC 315U HDTV TV Box", 1826 .valid = EM28XX_BOARD_NOT_VALIDATED, 1827 .tuner_type = TUNER_THOMSON_DTT761X, 1828 .tuner_gpio = em2882_kworld_315u_tuner_gpio, 1829 .tda9887_conf = TDA9887_PRESENT, 1830 .decoder = EM28XX_SAA711X, 1831 .has_dvb = 1, 1832 .dvb_gpio = em2882_kworld_315u_digital, 1833 .ir_codes = RC_MAP_KWORLD_315U, 1834 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 1835 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, 1836#if 0 1837 /* FIXME: Analog mode - still not ready */ 1838 .input = { { 1839 .type = EM28XX_VMUX_TELEVISION, 1840 .vmux = SAA7115_COMPOSITE2, 1841 .amux = EM28XX_AMUX_VIDEO, 1842 .gpio = em2882_kworld_315u_analog, 1843 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1844 }, { 1845 .type = EM28XX_VMUX_COMPOSITE, 1846 .vmux = SAA7115_COMPOSITE0, 1847 .amux = EM28XX_AMUX_LINE_IN, 1848 .gpio = em2882_kworld_315u_analog1, 1849 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1850 }, { 1851 .type = EM28XX_VMUX_SVIDEO, 1852 .vmux = SAA7115_SVIDEO3, 1853 .amux = EM28XX_AMUX_LINE_IN, 1854 .gpio = em2882_kworld_315u_analog1, 1855 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1856 } }, 1857#endif 1858 }, 1859 [EM2880_BOARD_EMPIRE_DUAL_TV] = { 1860 .name = "Empire dual TV", 1861 .tuner_type = TUNER_XC2028, 1862 .tuner_gpio = default_tuner_gpio, 1863 .has_dvb = 1, 1864 .dvb_gpio = default_digital, 1865 .mts_firmware = 1, 1866 .decoder = EM28XX_TVP5150, 1867 .input = { { 1868 .type = EM28XX_VMUX_TELEVISION, 1869 .vmux = TVP5150_COMPOSITE0, 1870 .amux = EM28XX_AMUX_VIDEO, 1871 .gpio = default_analog, 1872 }, { 1873 .type = EM28XX_VMUX_COMPOSITE, 1874 .vmux = TVP5150_COMPOSITE1, 1875 .amux = EM28XX_AMUX_LINE_IN, 1876 .gpio = default_analog, 1877 }, { 1878 .type = EM28XX_VMUX_SVIDEO, 1879 .vmux = TVP5150_SVIDEO, 1880 .amux = EM28XX_AMUX_LINE_IN, 1881 .gpio = default_analog, 1882 } }, 1883 }, 1884 [EM2881_BOARD_DNT_DA2_HYBRID] = { 1885 .name = "DNT DA2 Hybrid", 1886 .valid = EM28XX_BOARD_NOT_VALIDATED, 1887 .tuner_type = TUNER_XC2028, 1888 .tuner_gpio = default_tuner_gpio, 1889 .decoder = EM28XX_TVP5150, 1890 .input = { { 1891 .type = EM28XX_VMUX_TELEVISION, 1892 .vmux = TVP5150_COMPOSITE0, 1893 .amux = EM28XX_AMUX_VIDEO, 1894 .gpio = default_analog, 1895 }, { 1896 .type = EM28XX_VMUX_COMPOSITE, 1897 .vmux = TVP5150_COMPOSITE1, 1898 .amux = EM28XX_AMUX_LINE_IN, 1899 .gpio = default_analog, 1900 }, { 1901 .type = EM28XX_VMUX_SVIDEO, 1902 .vmux = TVP5150_SVIDEO, 1903 .amux = EM28XX_AMUX_LINE_IN, 1904 .gpio = default_analog, 1905 } }, 1906 }, 1907 [EM2881_BOARD_PINNACLE_HYBRID_PRO] = { 1908 .name = "Pinnacle Hybrid Pro", 1909 .tuner_type = TUNER_XC2028, 1910 .tuner_gpio = default_tuner_gpio, 1911 .decoder = EM28XX_TVP5150, 1912 .has_dvb = 1, 1913 .dvb_gpio = pinnacle_hybrid_pro_digital, 1914 .input = { { 1915 .type = EM28XX_VMUX_TELEVISION, 1916 .vmux = TVP5150_COMPOSITE0, 1917 .amux = EM28XX_AMUX_VIDEO, 1918 .gpio = pinnacle_hybrid_pro_analog, 1919 }, { 1920 .type = EM28XX_VMUX_COMPOSITE, 1921 .vmux = TVP5150_COMPOSITE1, 1922 .amux = EM28XX_AMUX_LINE_IN, 1923 .gpio = pinnacle_hybrid_pro_analog, 1924 }, { 1925 .type = EM28XX_VMUX_SVIDEO, 1926 .vmux = TVP5150_SVIDEO, 1927 .amux = EM28XX_AMUX_LINE_IN, 1928 .gpio = pinnacle_hybrid_pro_analog, 1929 } }, 1930 }, 1931 [EM2882_BOARD_PINNACLE_HYBRID_PRO_330E] = { 1932 .name = "Pinnacle Hybrid Pro (330e)", 1933 .tuner_type = TUNER_XC2028, 1934 .tuner_gpio = default_tuner_gpio, 1935 .mts_firmware = 1, 1936 .has_dvb = 1, 1937 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital, 1938 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 1939 .decoder = EM28XX_TVP5150, 1940 .input = { { 1941 .type = EM28XX_VMUX_TELEVISION, 1942 .vmux = TVP5150_COMPOSITE0, 1943 .amux = EM28XX_AMUX_VIDEO, 1944 .gpio = hauppauge_wintv_hvr_900_analog, 1945 }, { 1946 .type = EM28XX_VMUX_COMPOSITE, 1947 .vmux = TVP5150_COMPOSITE1, 1948 .amux = EM28XX_AMUX_LINE_IN, 1949 .gpio = hauppauge_wintv_hvr_900_analog, 1950 }, { 1951 .type = EM28XX_VMUX_SVIDEO, 1952 .vmux = TVP5150_SVIDEO, 1953 .amux = EM28XX_AMUX_LINE_IN, 1954 .gpio = hauppauge_wintv_hvr_900_analog, 1955 } }, 1956 }, 1957 [EM2882_BOARD_KWORLD_VS_DVBT] = { 1958 .name = "Kworld VS-DVB-T 323UR", 1959 .tuner_type = TUNER_XC2028, 1960 .tuner_gpio = default_tuner_gpio, 1961 .decoder = EM28XX_TVP5150, 1962 .mts_firmware = 1, 1963 .has_dvb = 1, 1964 .dvb_gpio = kworld_330u_digital, 1965 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ 1966 .ir_codes = RC_MAP_KWORLD_315U, 1967 .input = { { 1968 .type = EM28XX_VMUX_TELEVISION, 1969 .vmux = TVP5150_COMPOSITE0, 1970 .amux = EM28XX_AMUX_VIDEO, 1971 }, { 1972 .type = EM28XX_VMUX_COMPOSITE, 1973 .vmux = TVP5150_COMPOSITE1, 1974 .amux = EM28XX_AMUX_LINE_IN, 1975 }, { 1976 .type = EM28XX_VMUX_SVIDEO, 1977 .vmux = TVP5150_SVIDEO, 1978 .amux = EM28XX_AMUX_LINE_IN, 1979 } }, 1980 }, 1981 [EM2882_BOARD_TERRATEC_HYBRID_XS] = { 1982 .name = "Terratec Cinergy Hybrid T USB XS (em2882)", 1983 .tuner_type = TUNER_XC2028, 1984 .tuner_gpio = default_tuner_gpio, 1985 .mts_firmware = 1, 1986 .decoder = EM28XX_TVP5150, 1987 .has_dvb = 1, 1988 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1989 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS, 1990 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 1991 .input = { { 1992 .type = EM28XX_VMUX_TELEVISION, 1993 .vmux = TVP5150_COMPOSITE0, 1994 .amux = EM28XX_AMUX_VIDEO, 1995 .gpio = hauppauge_wintv_hvr_900_analog, 1996 }, { 1997 .type = EM28XX_VMUX_COMPOSITE, 1998 .vmux = TVP5150_COMPOSITE1, 1999 .amux = EM28XX_AMUX_LINE_IN, 2000 .gpio = hauppauge_wintv_hvr_900_analog, 2001 }, { 2002 .type = EM28XX_VMUX_SVIDEO, 2003 .vmux = TVP5150_SVIDEO, 2004 .amux = EM28XX_AMUX_LINE_IN, 2005 .gpio = hauppauge_wintv_hvr_900_analog, 2006 } }, 2007 }, 2008 [EM2882_BOARD_DIKOM_DK300] = { 2009 .name = "Dikom DK300", 2010 .tuner_type = TUNER_XC2028, 2011 .tuner_gpio = default_tuner_gpio, 2012 .decoder = EM28XX_TVP5150, 2013 .mts_firmware = 1, 2014 .has_dvb = 1, 2015 .dvb_gpio = dikom_dk300_digital, 2016 .input = { { 2017 .type = EM28XX_VMUX_TELEVISION, 2018 .vmux = TVP5150_COMPOSITE0, 2019 .amux = EM28XX_AMUX_VIDEO, 2020 .gpio = default_analog, 2021 } }, 2022 }, 2023 [EM2883_BOARD_KWORLD_HYBRID_330U] = { 2024 .name = "Kworld PlusTV HD Hybrid 330", 2025 .tuner_type = TUNER_XC2028, 2026 .tuner_gpio = default_tuner_gpio, 2027 .decoder = EM28XX_TVP5150, 2028 .mts_firmware = 1, 2029 .has_dvb = 1, 2030 .dvb_gpio = kworld_330u_digital, 2031 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 2032 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2033 EM28XX_I2C_EEPROM_ON_BOARD | 2034 EM28XX_I2C_EEPROM_KEY_VALID, 2035 .input = { { 2036 .type = EM28XX_VMUX_TELEVISION, 2037 .vmux = TVP5150_COMPOSITE0, 2038 .amux = EM28XX_AMUX_VIDEO, 2039 .gpio = kworld_330u_analog, 2040 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 2041 }, { 2042 .type = EM28XX_VMUX_COMPOSITE, 2043 .vmux = TVP5150_COMPOSITE1, 2044 .amux = EM28XX_AMUX_LINE_IN, 2045 .gpio = kworld_330u_analog, 2046 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 2047 }, { 2048 .type = EM28XX_VMUX_SVIDEO, 2049 .vmux = TVP5150_SVIDEO, 2050 .amux = EM28XX_AMUX_LINE_IN, 2051 .gpio = kworld_330u_analog, 2052 } }, 2053 }, 2054 [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = { 2055 .name = "Compro VideoMate ForYou/Stereo", 2056 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 2057 .tvaudio_addr = 0xb0, 2058 .tda9887_conf = TDA9887_PRESENT, 2059 .decoder = EM28XX_TVP5150, 2060 .adecoder = EM28XX_TVAUDIO, 2061 .mute_gpio = compro_mute_gpio, 2062 .input = { { 2063 .type = EM28XX_VMUX_TELEVISION, 2064 .vmux = TVP5150_COMPOSITE0, 2065 .amux = EM28XX_AMUX_VIDEO, 2066 .gpio = compro_unmute_tv_gpio, 2067 }, { 2068 .type = EM28XX_VMUX_SVIDEO, 2069 .vmux = TVP5150_SVIDEO, 2070 .amux = EM28XX_AMUX_LINE_IN, 2071 .gpio = compro_unmute_svid_gpio, 2072 } }, 2073 }, 2074 [EM2860_BOARD_KAIOMY_TVNPC_U2] = { 2075 .name = "Kaiomy TVnPC U2", 2076 .vchannels = 3, 2077 .tuner_type = TUNER_XC2028, 2078 .tuner_addr = 0x61, 2079 .mts_firmware = 1, 2080 .decoder = EM28XX_TVP5150, 2081 .tuner_gpio = default_tuner_gpio, 2082 .ir_codes = RC_MAP_KAIOMY, 2083 .input = { { 2084 .type = EM28XX_VMUX_TELEVISION, 2085 .vmux = TVP5150_COMPOSITE0, 2086 .amux = EM28XX_AMUX_VIDEO, 2087 2088 }, { 2089 .type = EM28XX_VMUX_COMPOSITE, 2090 .vmux = TVP5150_COMPOSITE1, 2091 .amux = EM28XX_AMUX_LINE_IN, 2092 }, { 2093 .type = EM28XX_VMUX_SVIDEO, 2094 .vmux = TVP5150_SVIDEO, 2095 .amux = EM28XX_AMUX_LINE_IN, 2096 } }, 2097 .radio = { 2098 .type = EM28XX_RADIO, 2099 .amux = EM28XX_AMUX_LINE_IN, 2100 } 2101 }, 2102 [EM2860_BOARD_EASYCAP] = { 2103 .name = "Easy Cap Capture DC-60", 2104 .vchannels = 2, 2105 .tuner_type = TUNER_ABSENT, 2106 .decoder = EM28XX_SAA711X, 2107 .input = { { 2108 .type = EM28XX_VMUX_COMPOSITE, 2109 .vmux = SAA7115_COMPOSITE0, 2110 .amux = EM28XX_AMUX_LINE_IN, 2111 }, { 2112 .type = EM28XX_VMUX_SVIDEO, 2113 .vmux = SAA7115_SVIDEO3, 2114 .amux = EM28XX_AMUX_LINE_IN, 2115 } }, 2116 }, 2117 [EM2820_BOARD_IODATA_GVMVP_SZ] = { 2118 .name = "IO-DATA GV-MVP/SZ", 2119 .tuner_type = TUNER_PHILIPS_FM1236_MK3, 2120 .tuner_gpio = default_tuner_gpio, 2121 .tda9887_conf = TDA9887_PRESENT, 2122 .decoder = EM28XX_TVP5150, 2123 .input = { { 2124 .type = EM28XX_VMUX_TELEVISION, 2125 .vmux = TVP5150_COMPOSITE0, 2126 .amux = EM28XX_AMUX_VIDEO, 2127 }, { /* Composite has not been tested yet */ 2128 .type = EM28XX_VMUX_COMPOSITE, 2129 .vmux = TVP5150_COMPOSITE1, 2130 .amux = EM28XX_AMUX_VIDEO, 2131 }, { /* S-video has not been tested yet */ 2132 .type = EM28XX_VMUX_SVIDEO, 2133 .vmux = TVP5150_SVIDEO, 2134 .amux = EM28XX_AMUX_VIDEO, 2135 } }, 2136 }, 2137 [EM2860_BOARD_TERRATEC_GRABBY] = { 2138 .name = "Terratec Grabby", 2139 .vchannels = 2, 2140 .tuner_type = TUNER_ABSENT, 2141 .decoder = EM28XX_SAA711X, 2142 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 2143 .input = { { 2144 .type = EM28XX_VMUX_COMPOSITE, 2145 .vmux = SAA7115_COMPOSITE0, 2146 .amux = EM28XX_AMUX_LINE_IN, 2147 }, { 2148 .type = EM28XX_VMUX_SVIDEO, 2149 .vmux = SAA7115_SVIDEO3, 2150 .amux = EM28XX_AMUX_LINE_IN, 2151 } }, 2152 .buttons = std_snapshot_button, 2153 .leds = terratec_grabby_leds, 2154 }, 2155 [EM2860_BOARD_TERRATEC_AV350] = { 2156 .name = "Terratec AV350", 2157 .vchannels = 2, 2158 .tuner_type = TUNER_ABSENT, 2159 .decoder = EM28XX_TVP5150, 2160 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 2161 .mute_gpio = terratec_av350_mute_gpio, 2162 .input = { { 2163 .type = EM28XX_VMUX_COMPOSITE, 2164 .vmux = TVP5150_COMPOSITE1, 2165 .amux = EM28XX_AMUX_LINE_IN, 2166 .gpio = terratec_av350_unmute_gpio, 2167 2168 }, { 2169 .type = EM28XX_VMUX_SVIDEO, 2170 .vmux = TVP5150_SVIDEO, 2171 .amux = EM28XX_AMUX_LINE_IN, 2172 .gpio = terratec_av350_unmute_gpio, 2173 } }, 2174 }, 2175 2176 [EM2860_BOARD_ELGATO_VIDEO_CAPTURE] = { 2177 .name = "Elgato Video Capture", 2178 .decoder = EM28XX_SAA711X, 2179 .tuner_type = TUNER_ABSENT, /* Capture only device */ 2180 .input = { { 2181 .type = EM28XX_VMUX_COMPOSITE, 2182 .vmux = SAA7115_COMPOSITE0, 2183 .amux = EM28XX_AMUX_LINE_IN, 2184 }, { 2185 .type = EM28XX_VMUX_SVIDEO, 2186 .vmux = SAA7115_SVIDEO3, 2187 .amux = EM28XX_AMUX_LINE_IN, 2188 } }, 2189 }, 2190 2191 [EM2882_BOARD_EVGA_INDTUBE] = { 2192 .name = "Evga inDtube", 2193 .tuner_type = TUNER_XC2028, 2194 .tuner_gpio = default_tuner_gpio, 2195 .decoder = EM28XX_TVP5150, 2196 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ 2197 .mts_firmware = 1, 2198 .has_dvb = 1, 2199 .dvb_gpio = evga_indtube_digital, 2200 .ir_codes = RC_MAP_EVGA_INDTUBE, 2201 .input = { { 2202 .type = EM28XX_VMUX_TELEVISION, 2203 .vmux = TVP5150_COMPOSITE0, 2204 .amux = EM28XX_AMUX_VIDEO, 2205 .gpio = evga_indtube_analog, 2206 }, { 2207 .type = EM28XX_VMUX_COMPOSITE, 2208 .vmux = TVP5150_COMPOSITE1, 2209 .amux = EM28XX_AMUX_LINE_IN, 2210 .gpio = evga_indtube_analog, 2211 }, { 2212 .type = EM28XX_VMUX_SVIDEO, 2213 .vmux = TVP5150_SVIDEO, 2214 .amux = EM28XX_AMUX_LINE_IN, 2215 .gpio = evga_indtube_analog, 2216 } }, 2217 }, 2218 /* 2219 * eb1a:2868 Empia EM2870 + Philips CU1216L NIM 2220 * (Philips TDA10023 + Infineon TUA6034) 2221 */ 2222 [EM2870_BOARD_REDDO_DVB_C_USB_BOX] = { 2223 .name = "Reddo DVB-C USB TV Box", 2224 .tuner_type = TUNER_ABSENT, 2225 .tuner_gpio = reddo_dvb_c_usb_box, 2226 .has_dvb = 1, 2227 }, 2228 /* 2229 * 1b80:a340 - Empia EM2870, NXP TDA18271HD and LG DT3304, sold 2230 * initially as the KWorld PlusTV 340U, then as the UB435-Q. 2231 * Early variants have a TDA18271HD/C1, later ones a TDA18271HD/C2 2232 */ 2233 [EM2870_BOARD_KWORLD_A340] = { 2234 .name = "KWorld PlusTV 340U or UB435-Q (ATSC)", 2235 .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */ 2236 .has_dvb = 1, 2237 .dvb_gpio = kworld_a340_digital, 2238 .tuner_gpio = default_tuner_gpio, 2239 }, 2240 /* 2241 * 2013:024f PCTV nanoStick T2 290e. 2242 * Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2 2243 */ 2244 [EM28174_BOARD_PCTV_290E] = { 2245 .name = "PCTV nanoStick T2 290e", 2246 .def_i2c_bus = 1, 2247 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2248 EM28XX_I2C_FREQ_100_KHZ, 2249 .tuner_type = TUNER_ABSENT, 2250 .tuner_gpio = pctv_290e, 2251 .has_dvb = 1, 2252 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2253 }, 2254 /* 2255 * 2013:024f PCTV DVB-S2 Stick 460e 2256 * Empia EM28174, NXP TDA10071, Conexant CX24118A and Allegro A8293 2257 */ 2258 [EM28174_BOARD_PCTV_460E] = { 2259 .def_i2c_bus = 1, 2260 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2261 EM28XX_I2C_FREQ_400_KHZ, 2262 .name = "PCTV DVB-S2 Stick (460e)", 2263 .tuner_type = TUNER_ABSENT, 2264 .tuner_gpio = pctv_460e, 2265 .has_dvb = 1, 2266 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2267 }, 2268 /* 2269 * eb1a:5006 Honestech VIDBOX NW03 2270 * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner 2271 */ 2272 [EM2860_BOARD_HT_VIDBOX_NW03] = { 2273 .name = "Honestech Vidbox NW03", 2274 .tuner_type = TUNER_ABSENT, 2275 .decoder = EM28XX_SAA711X, 2276 .input = { { 2277 .type = EM28XX_VMUX_COMPOSITE, 2278 .vmux = SAA7115_COMPOSITE0, 2279 .amux = EM28XX_AMUX_LINE_IN, 2280 }, { 2281 .type = EM28XX_VMUX_SVIDEO, 2282 .vmux = SAA7115_SVIDEO3, /* S-VIDEO needs check */ 2283 .amux = EM28XX_AMUX_LINE_IN, 2284 } }, 2285 }, 2286 /* 2287 * 1b80:e425 MaxMedia UB425-TC 2288 * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 2289 */ 2290 [EM2874_BOARD_MAXMEDIA_UB425_TC] = { 2291 .name = "MaxMedia UB425-TC", 2292 .tuner_type = TUNER_ABSENT, 2293 .tuner_gpio = maxmedia_ub425_tc, 2294 .has_dvb = 1, 2295 .ir_codes = RC_MAP_REDDO, 2296 .def_i2c_bus = 1, 2297 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2298 EM28XX_I2C_FREQ_400_KHZ, 2299 }, 2300 /* 2301 * 2304:0242 PCTV QuatroStick (510e) 2302 * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 2303 */ 2304 [EM2884_BOARD_PCTV_510E] = { 2305 .name = "PCTV QuatroStick (510e)", 2306 .tuner_type = TUNER_ABSENT, 2307 .tuner_gpio = pctv_510e, 2308 .has_dvb = 1, 2309 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2310 .def_i2c_bus = 1, 2311 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2312 EM28XX_I2C_FREQ_400_KHZ, 2313 }, 2314 /* 2315 * 2013:0251 PCTV QuatroStick nano (520e) 2316 * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 2317 */ 2318 [EM2884_BOARD_PCTV_520E] = { 2319 .name = "PCTV QuatroStick nano (520e)", 2320 .tuner_type = TUNER_ABSENT, 2321 .tuner_gpio = pctv_520e, 2322 .has_dvb = 1, 2323 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2324 .def_i2c_bus = 1, 2325 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2326 EM28XX_I2C_FREQ_400_KHZ, 2327 }, 2328 [EM2884_BOARD_TERRATEC_HTC_USB_XS] = { 2329 .name = "Terratec Cinergy HTC USB XS", 2330 .has_dvb = 1, 2331 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, 2332 .tuner_type = TUNER_ABSENT, 2333 .def_i2c_bus = 1, 2334 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2335 EM28XX_I2C_FREQ_400_KHZ, 2336 }, 2337 /* 2338 * 1b80:e1cc Delock 61959 2339 * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 2340 * mostly the same as MaxMedia UB-425-TC but different remote 2341 */ 2342 [EM2874_BOARD_DELOCK_61959] = { 2343 .name = "Delock 61959", 2344 .tuner_type = TUNER_ABSENT, 2345 .tuner_gpio = maxmedia_ub425_tc, 2346 .has_dvb = 1, 2347 .ir_codes = RC_MAP_DELOCK_61959, 2348 .def_i2c_bus = 1, 2349 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2350 EM28XX_I2C_FREQ_400_KHZ, 2351 }, 2352 /* 2353 * 1b80:e346 KWorld USB ATSC TV Stick UB435-Q V2 2354 * Empia EM2874B + LG DT3305 + NXP TDA18271HDC2 2355 */ 2356 [EM2874_BOARD_KWORLD_UB435Q_V2] = { 2357 .name = "KWorld USB ATSC TV Stick UB435-Q V2", 2358 .tuner_type = TUNER_ABSENT, 2359 .has_dvb = 1, 2360 .dvb_gpio = kworld_a340_digital, 2361 .tuner_gpio = default_tuner_gpio, 2362 .def_i2c_bus = 1, 2363 }, 2364 /* 2365 * 1b80:e34c KWorld USB ATSC TV Stick UB435-Q V3 2366 * Empia EM2874B + LG DT3305 + NXP TDA18271HDC2 2367 */ 2368 [EM2874_BOARD_KWORLD_UB435Q_V3] = { 2369 .name = "KWorld USB ATSC TV Stick UB435-Q V3", 2370 .tuner_type = TUNER_ABSENT, 2371 .has_dvb = 1, 2372 .tuner_gpio = kworld_ub435q_v3_digital, 2373 .def_i2c_bus = 1, 2374 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2375 EM28XX_I2C_FREQ_100_KHZ, 2376 .leds = kworld_ub435q_v3_leds, 2377 }, 2378 [EM2874_BOARD_PCTV_HD_MINI_80E] = { 2379 .name = "Pinnacle PCTV HD Mini", 2380 .tuner_type = TUNER_ABSENT, 2381 .has_dvb = 1, 2382 .dvb_gpio = em2874_pctv_80e_digital, 2383 .decoder = EM28XX_NODECODER, 2384 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2385 .leds = pctv_80e_leds, 2386 }, 2387 /* 2388 * 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam 2389 * Empia EM2765 + OmniVision OV2640 2390 */ 2391 [EM2765_BOARD_SPEEDLINK_VAD_LAPLACE] = { 2392 .name = "SpeedLink Vicious And Devine Laplace webcam", 2393 .xclk = EM28XX_XCLK_FREQUENCY_24MHZ, 2394 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2395 EM28XX_I2C_FREQ_100_KHZ, 2396 .def_i2c_bus = 1, 2397 .tuner_type = TUNER_ABSENT, 2398 .is_webcam = 1, 2399 .input = { { 2400 .type = EM28XX_VMUX_COMPOSITE, 2401 .amux = EM28XX_AMUX_VIDEO, 2402 .gpio = speedlink_vad_laplace_reg_seq, 2403 } }, 2404 .buttons = speedlink_vad_laplace_buttons, 2405 .leds = speedlink_vad_laplace_leds, 2406 }, 2407 /* 2408 * 2013:0258 PCTV DVB-S2 Stick (461e) 2409 * Empia EM28178, Montage M88DS3103, Montage M88TS2022, Allegro A8293 2410 */ 2411 [EM28178_BOARD_PCTV_461E] = { 2412 .def_i2c_bus = 1, 2413 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2414 EM28XX_I2C_FREQ_400_KHZ, 2415 .name = "PCTV DVB-S2 Stick (461e)", 2416 .tuner_type = TUNER_ABSENT, 2417 .tuner_gpio = pctv_461e, 2418 .has_dvb = 1, 2419 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2420 }, 2421 /* 2422 * 2013:0259 PCTV DVB-S2 Stick (461e_v2) 2423 * Empia EM28178, Montage M88DS3103b, Montage M88TS2022, Allegro A8293 2424 */ 2425 [EM28178_BOARD_PCTV_461E_V2] = { 2426 .def_i2c_bus = 1, 2427 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2428 EM28XX_I2C_FREQ_400_KHZ, 2429 .name = "PCTV DVB-S2 Stick (461e v2)", 2430 .tuner_type = TUNER_ABSENT, 2431 .tuner_gpio = pctv_461e, 2432 .has_dvb = 1, 2433 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2434 }, 2435 /* 2436 * 2013:025f PCTV tripleStick (292e). 2437 * Empia EM28178, Silicon Labs Si2168, Silicon Labs Si2157 2438 */ 2439 [EM28178_BOARD_PCTV_292E] = { 2440 .name = "PCTV tripleStick (292e)", 2441 .def_i2c_bus = 1, 2442 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2443 EM28XX_I2C_FREQ_400_KHZ, 2444 .tuner_type = TUNER_ABSENT, 2445 .tuner_gpio = pctv_292e, 2446 .has_dvb = 1, 2447 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2448 }, 2449 [EM2861_BOARD_LEADTEK_VC100] = { 2450 .name = "Leadtek VC100", 2451 .tuner_type = TUNER_ABSENT, /* Capture only device */ 2452 .decoder = EM28XX_TVP5150, 2453 .input = { { 2454 .type = EM28XX_VMUX_COMPOSITE, 2455 .vmux = TVP5150_COMPOSITE1, 2456 .amux = EM28XX_AMUX_LINE_IN, 2457 }, { 2458 .type = EM28XX_VMUX_SVIDEO, 2459 .vmux = TVP5150_SVIDEO, 2460 .amux = EM28XX_AMUX_LINE_IN, 2461 } }, 2462 }, 2463 /* 2464 * eb1a:8179 Terratec Cinergy T2 Stick HD. 2465 * Empia EM28178, Silicon Labs Si2168, Silicon Labs Si2146 2466 */ 2467 [EM28178_BOARD_TERRATEC_T2_STICK_HD] = { 2468 .name = "Terratec Cinergy T2 Stick HD", 2469 .def_i2c_bus = 1, 2470 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2471 EM28XX_I2C_FREQ_400_KHZ, 2472 .tuner_type = TUNER_ABSENT, 2473 .tuner_gpio = terratec_t2_stick_hd, 2474 .has_dvb = 1, 2475 .ir_codes = RC_MAP_TERRATEC_SLIM_2, 2476 }, 2477 2478 /* 2479 * 3275:0085 PLEX PX-BCUD. 2480 * Empia EM28178, TOSHIBA TC90532XBG, Sharp QM1D1C0042 2481 */ 2482 [EM28178_BOARD_PLEX_PX_BCUD] = { 2483 .name = "PLEX PX-BCUD", 2484 .xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ, 2485 .def_i2c_bus = 1, 2486 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, 2487 .tuner_type = TUNER_ABSENT, 2488 .tuner_gpio = plex_px_bcud, 2489 .has_dvb = 1, 2490 }, 2491 /* 2492 * 2040:0265 Hauppauge WinTV-dualHD (DVB version) Isoc. 2493 * 2040:8265 Hauppauge WinTV-dualHD (DVB version) Bulk. 2494 * Empia EM28274, 2x Silicon Labs Si2168, 2x Silicon Labs Si2157 2495 */ 2496 [EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB] = { 2497 .name = "Hauppauge WinTV-dualHD DVB", 2498 .def_i2c_bus = 1, 2499 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2500 EM28XX_I2C_FREQ_400_KHZ, 2501 .tuner_type = TUNER_SI2157, 2502 .tuner_gpio = hauppauge_dualhd_dvb, 2503 .has_dvb = 1, 2504 .has_dual_ts = 1, 2505 .ir_codes = RC_MAP_HAUPPAUGE, 2506 .leds = hauppauge_dualhd_leds, 2507 .input = { { 2508 .type = EM28XX_VMUX_COMPOSITE, 2509 .vmux = TVP5150_COMPOSITE1, 2510 .amux = EM28XX_AMUX_LINE_IN, 2511 } }, 2512 }, 2513 /* 2514 * 2040:026d Hauppauge WinTV-dualHD (model 01595 - ATSC/QAM) Isoc. 2515 * 2040:826d Hauppauge WinTV-dualHD (model 01595 - ATSC/QAM) Bulk. 2516 * Empia EM28274, 2x LG LGDT3306A, 2x Silicon Labs Si2157 2517 */ 2518 [EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595] = { 2519 .name = "Hauppauge WinTV-dualHD 01595 ATSC/QAM", 2520 .def_i2c_bus = 1, 2521 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2522 EM28XX_I2C_FREQ_400_KHZ, 2523 .tuner_type = TUNER_ABSENT, 2524 .tuner_gpio = hauppauge_dualhd_dvb, 2525 .has_dvb = 1, 2526 .has_dual_ts = 1, 2527 .ir_codes = RC_MAP_HAUPPAUGE, 2528 .leds = hauppauge_dualhd_leds, 2529 }, 2530 /* 2531 * 1b80:e349 Magix USB Videowandler-2 2532 * (same chips as Honestech VIDBOX NW03) 2533 * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner 2534 */ 2535 [EM2861_BOARD_MAGIX_VIDEOWANDLER2] = { 2536 .name = "Magix USB Videowandler-2", 2537 .tuner_type = TUNER_ABSENT, 2538 .decoder = EM28XX_SAA711X, 2539 .input = { { 2540 .type = EM28XX_VMUX_COMPOSITE, 2541 .vmux = SAA7115_COMPOSITE0, 2542 .amux = EM28XX_AMUX_LINE_IN, 2543 }, { 2544 .type = EM28XX_VMUX_SVIDEO, 2545 .amux = EM28XX_AMUX_LINE_IN, 2546 } }, 2547 }, 2548 /* 2549 * 1f4d:1abe MyGica iGrabber 2550 * (same as several other EM2860 devices) 2551 * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner 2552 */ 2553 [EM2860_BOARD_MYGICA_IGRABBER] = { 2554 .name = "MyGica iGrabber", 2555 .vchannels = 2, 2556 .tuner_type = TUNER_ABSENT, 2557 .decoder = EM28XX_SAA711X, 2558 .input = { { 2559 .type = EM28XX_VMUX_COMPOSITE, 2560 .vmux = SAA7115_COMPOSITE0, 2561 .amux = EM28XX_AMUX_LINE_IN, 2562 }, { 2563 .type = EM28XX_VMUX_SVIDEO, 2564 .vmux = SAA7115_SVIDEO3, 2565 .amux = EM28XX_AMUX_LINE_IN, 2566 } }, 2567 }, 2568 /* 2040:826d Hauppauge USB QuadHD 2569 * Empia 28274, Max Linear 692 ATSC combo demod/tuner 2570 */ 2571 [EM2874_BOARD_HAUPPAUGE_USB_QUADHD] = { 2572 .name = "Hauppauge USB QuadHD ATSC", 2573 .def_i2c_bus = 1, 2574 .has_dual_ts = 1, 2575 .has_dvb = 1, 2576 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ, 2577 .tuner_type = TUNER_ABSENT, 2578 .tuner_gpio = hauppauge_usb_quadhd_atsc_reg_seq, 2579 .leds = hauppauge_usb_quadhd_leds, 2580 }, 2581}; 2582EXPORT_SYMBOL_GPL(em28xx_boards); 2583 2584static const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards); 2585 2586/* table of devices that work with this driver */ 2587struct usb_device_id em28xx_id_table[] = { 2588 { USB_DEVICE(0xeb1a, 0x2750), 2589 .driver_info = EM2750_BOARD_UNKNOWN }, 2590 { USB_DEVICE(0xeb1a, 0x2751), 2591 .driver_info = EM2750_BOARD_UNKNOWN }, 2592 { USB_DEVICE(0xeb1a, 0x2800), 2593 .driver_info = EM2800_BOARD_UNKNOWN }, 2594 { USB_DEVICE(0xeb1a, 0x2710), 2595 .driver_info = EM2820_BOARD_UNKNOWN }, 2596 { USB_DEVICE(0xeb1a, 0x2820), 2597 .driver_info = EM2820_BOARD_UNKNOWN }, 2598 { USB_DEVICE(0xeb1a, 0x2821), 2599 .driver_info = EM2820_BOARD_UNKNOWN }, 2600 { USB_DEVICE(0xeb1a, 0x2860), 2601 .driver_info = EM2820_BOARD_UNKNOWN }, 2602 { USB_DEVICE(0xeb1a, 0x2861), 2603 .driver_info = EM2820_BOARD_UNKNOWN }, 2604 { USB_DEVICE(0xeb1a, 0x2862), 2605 .driver_info = EM2820_BOARD_UNKNOWN }, 2606 { USB_DEVICE(0xeb1a, 0x2863), 2607 .driver_info = EM2820_BOARD_UNKNOWN }, 2608 { USB_DEVICE(0xeb1a, 0x2870), 2609 .driver_info = EM2820_BOARD_UNKNOWN }, 2610 { USB_DEVICE(0xeb1a, 0x2881), 2611 .driver_info = EM2820_BOARD_UNKNOWN }, 2612 { USB_DEVICE(0xeb1a, 0x2883), /* used by :Zolid Hybrid Tv Stick */ 2613 .driver_info = EM2820_BOARD_UNKNOWN }, 2614 { USB_DEVICE(0xeb1a, 0x2868), 2615 .driver_info = EM2820_BOARD_UNKNOWN }, 2616 { USB_DEVICE(0xeb1a, 0x2875), 2617 .driver_info = EM2820_BOARD_UNKNOWN }, 2618 { USB_DEVICE(0xeb1a, 0x2885), /* MSI Digivox Trio */ 2619 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2620 { USB_DEVICE(0xeb1a, 0xe300), 2621 .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U }, 2622 { USB_DEVICE(0xeb1a, 0xe303), 2623 .driver_info = EM2860_BOARD_KAIOMY_TVNPC_U2 }, 2624 { USB_DEVICE(0xeb1a, 0xe305), 2625 .driver_info = EM2880_BOARD_KWORLD_DVB_305U }, 2626 { USB_DEVICE(0xeb1a, 0xe310), 2627 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD }, 2628 { USB_DEVICE(0xeb1a, 0xa313), 2629 .driver_info = EM2882_BOARD_KWORLD_ATSC_315U }, 2630 { USB_DEVICE(0xeb1a, 0xa316), 2631 .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U }, 2632 { USB_DEVICE(0xeb1a, 0xe320), 2633 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II }, 2634 { USB_DEVICE(0xeb1a, 0xe323), 2635 .driver_info = EM2882_BOARD_KWORLD_VS_DVBT }, 2636 { USB_DEVICE(0xeb1a, 0xe350), 2637 .driver_info = EM2870_BOARD_KWORLD_350U }, 2638 { USB_DEVICE(0xeb1a, 0xe355), 2639 .driver_info = EM2870_BOARD_KWORLD_355U }, 2640 { USB_DEVICE(0xeb1a, 0x2801), 2641 .driver_info = EM2800_BOARD_GRABBEEX_USB2800 }, 2642 { USB_DEVICE(0xeb1a, 0xe357), 2643 .driver_info = EM2870_BOARD_KWORLD_355U }, 2644 { USB_DEVICE(0xeb1a, 0xe359), 2645 .driver_info = EM2870_BOARD_KWORLD_355U }, 2646 { USB_DEVICE(0x1b80, 0xe302), /* Kaiser Baas Video to DVD maker */ 2647 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2648 { USB_DEVICE(0x1b80, 0xe304), /* Kworld DVD Maker 2 */ 2649 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2650 { USB_DEVICE(0x0ccd, 0x0036), 2651 .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 }, 2652 { USB_DEVICE(0x0ccd, 0x004c), 2653 .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR }, 2654 { USB_DEVICE(0x0ccd, 0x004f), 2655 .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS }, 2656 { USB_DEVICE(0x0ccd, 0x005e), 2657 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS }, 2658 { USB_DEVICE(0x0ccd, 0x0042), 2659 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS }, 2660 { USB_DEVICE(0x0ccd, 0x0043), 2661 .driver_info = EM2870_BOARD_TERRATEC_XS_MT2060 }, 2662 { USB_DEVICE(0x0ccd, 0x008e), /* Cinergy HTC USB XS Rev. 1 */ 2663 .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS }, 2664 { USB_DEVICE(0x0ccd, 0x00ac), /* Cinergy HTC USB XS Rev. 2 */ 2665 .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS }, 2666 { USB_DEVICE(0x0ccd, 0x10a2), /* H5 Rev. 1 */ 2667 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2668 { USB_DEVICE(0x0ccd, 0x10ad), /* H5 Rev. 2 */ 2669 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2670 { USB_DEVICE(0x0ccd, 0x10b6), /* H5 Rev. 3 */ 2671 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2672 { USB_DEVICE(0x0ccd, 0x10b2), /* H6 */ 2673 .driver_info = EM2884_BOARD_TERRATEC_H6 }, 2674 { USB_DEVICE(0x0ccd, 0x0084), 2675 .driver_info = EM2860_BOARD_TERRATEC_AV350 }, 2676 { USB_DEVICE(0x0ccd, 0x0096), 2677 .driver_info = EM2860_BOARD_TERRATEC_GRABBY }, 2678 { USB_DEVICE(0x0ccd, 0x10AF), 2679 .driver_info = EM2860_BOARD_TERRATEC_GRABBY }, 2680 { USB_DEVICE(0x0ccd, 0x00b2), 2681 .driver_info = EM2884_BOARD_CINERGY_HTC_STICK }, 2682 { USB_DEVICE(0x0fd9, 0x0018), 2683 .driver_info = EM2884_BOARD_ELGATO_EYETV_HYBRID_2008 }, 2684 { USB_DEVICE(0x0fd9, 0x0033), 2685 .driver_info = EM2860_BOARD_ELGATO_VIDEO_CAPTURE }, 2686 { USB_DEVICE(0x185b, 0x2870), 2687 .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE }, 2688 { USB_DEVICE(0x185b, 0x2041), 2689 .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU }, 2690 { USB_DEVICE(0x2040, 0x4200), 2691 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 }, 2692 { USB_DEVICE(0x2040, 0x4201), 2693 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 }, 2694 { USB_DEVICE(0x2040, 0x6500), 2695 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 }, 2696 { USB_DEVICE(0x2040, 0x6502), 2697 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 }, 2698 { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */ 2699 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, 2700 { USB_DEVICE(0x2040, 0x6517), /* HP HVR-950 */ 2701 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, 2702 { USB_DEVICE(0x2040, 0x651b), /* RP HVR-950 */ 2703 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, 2704 { USB_DEVICE(0x2040, 0x651f), 2705 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 }, 2706 { USB_DEVICE(0x2040, 0x0265), 2707 .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB }, 2708 { USB_DEVICE(0x2040, 0x8265), 2709 .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB }, 2710 { USB_DEVICE(0x2040, 0x026d), 2711 .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595 }, 2712 { USB_DEVICE(0x2040, 0x826d), 2713 .driver_info = EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595 }, 2714 { USB_DEVICE(0x2040, 0x846d), 2715 .driver_info = EM2874_BOARD_HAUPPAUGE_USB_QUADHD }, 2716 { USB_DEVICE(0x0438, 0xb002), 2717 .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 }, 2718 { USB_DEVICE(0x2001, 0xf112), 2719 .driver_info = EM2820_BOARD_DLINK_USB_TV }, 2720 { USB_DEVICE(0x2304, 0x0207), 2721 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2722 { USB_DEVICE(0x2304, 0x0208), 2723 .driver_info = EM2820_BOARD_PINNACLE_USB_2 }, 2724 { USB_DEVICE(0x2304, 0x021a), 2725 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2726 { USB_DEVICE(0x2304, 0x0226), 2727 .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO_330E }, 2728 { USB_DEVICE(0x2304, 0x0227), 2729 .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO }, 2730 { USB_DEVICE(0x2304, 0x023f), 2731 .driver_info = EM2874_BOARD_PCTV_HD_MINI_80E }, 2732 { USB_DEVICE(0x0413, 0x6023), 2733 .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII }, 2734 { USB_DEVICE(0x093b, 0xa003), 2735 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2736 { USB_DEVICE(0x093b, 0xa005), 2737 .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U }, 2738 { USB_DEVICE(0x04bb, 0x0515), 2739 .driver_info = EM2820_BOARD_IODATA_GVMVP_SZ }, 2740 { USB_DEVICE(0xeb1a, 0x50a6), 2741 .driver_info = EM2860_BOARD_GADMEI_UTV330 }, 2742 { USB_DEVICE(0x1b80, 0xa340), 2743 .driver_info = EM2870_BOARD_KWORLD_A340 }, 2744 { USB_DEVICE(0x1b80, 0xe346), 2745 .driver_info = EM2874_BOARD_KWORLD_UB435Q_V2 }, 2746 { USB_DEVICE(0x1b80, 0xe34c), 2747 .driver_info = EM2874_BOARD_KWORLD_UB435Q_V3 }, 2748 { USB_DEVICE(0x2013, 0x024f), 2749 .driver_info = EM28174_BOARD_PCTV_290E }, 2750 { USB_DEVICE(0x2013, 0x024c), 2751 .driver_info = EM28174_BOARD_PCTV_460E }, 2752 { USB_DEVICE(0x2040, 0x1605), 2753 .driver_info = EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C }, 2754 { USB_DEVICE(0x1b80, 0xe755), 2755 .driver_info = EM2884_BOARD_C3TECH_DIGITAL_DUO }, 2756 { USB_DEVICE(0xeb1a, 0x5006), 2757 .driver_info = EM2860_BOARD_HT_VIDBOX_NW03 }, 2758 { USB_DEVICE(0x1b80, 0xe309), /* Sveon STV40 */ 2759 .driver_info = EM2860_BOARD_EASYCAP }, 2760 { USB_DEVICE(0x1b80, 0xe425), 2761 .driver_info = EM2874_BOARD_MAXMEDIA_UB425_TC }, 2762 { USB_DEVICE(0x1f4d, 0x1abe), 2763 .driver_info = EM2860_BOARD_MYGICA_IGRABBER }, 2764 { USB_DEVICE(0x2304, 0x0242), 2765 .driver_info = EM2884_BOARD_PCTV_510E }, 2766 { USB_DEVICE(0x2013, 0x0251), 2767 .driver_info = EM2884_BOARD_PCTV_520E }, 2768 { USB_DEVICE(0x1b80, 0xe1cc), 2769 .driver_info = EM2874_BOARD_DELOCK_61959 }, 2770 { USB_DEVICE(0x1ae7, 0x9003), 2771 .driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE }, 2772 { USB_DEVICE(0x1ae7, 0x9004), 2773 .driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE }, 2774 { USB_DEVICE(0x2013, 0x0258), 2775 .driver_info = EM28178_BOARD_PCTV_461E }, 2776 { USB_DEVICE(0x2013, 0x8258), /* Bulk transport 461e */ 2777 .driver_info = EM28178_BOARD_PCTV_461E }, 2778 { USB_DEVICE(0x2013, 0x0461), 2779 .driver_info = EM28178_BOARD_PCTV_461E_V2 }, 2780 { USB_DEVICE(0x2013, 0x8461), /* Bulk transport 461e v2 */ 2781 .driver_info = EM28178_BOARD_PCTV_461E_V2 }, 2782 { USB_DEVICE(0x2013, 0x0259), 2783 .driver_info = EM28178_BOARD_PCTV_461E_V2 }, 2784 { USB_DEVICE(0x2013, 0x025f), 2785 .driver_info = EM28178_BOARD_PCTV_292E }, 2786 { USB_DEVICE(0x2013, 0x0264), /* Hauppauge WinTV-soloHD 292e SE */ 2787 .driver_info = EM28178_BOARD_PCTV_292E }, 2788 { USB_DEVICE(0x2040, 0x0264), /* Hauppauge WinTV-soloHD Isoc */ 2789 .driver_info = EM28178_BOARD_PCTV_292E }, 2790 { USB_DEVICE(0x2040, 0x8264), /* Hauppauge OEM Generic WinTV-soloHD Bulk */ 2791 .driver_info = EM28178_BOARD_PCTV_292E }, 2792 { USB_DEVICE(0x2040, 0x8268), /* Hauppauge Retail WinTV-soloHD Bulk */ 2793 .driver_info = EM28178_BOARD_PCTV_292E }, 2794 { USB_DEVICE(0x0413, 0x6f07), 2795 .driver_info = EM2861_BOARD_LEADTEK_VC100 }, 2796 { USB_DEVICE(0xeb1a, 0x8179), 2797 .driver_info = EM28178_BOARD_TERRATEC_T2_STICK_HD }, 2798 { USB_DEVICE(0x3275, 0x0085), 2799 .driver_info = EM28178_BOARD_PLEX_PX_BCUD }, 2800 { USB_DEVICE(0xeb1a, 0x5051), /* Ion Video 2 PC MKII / Startech svid2usb23 / Raygo R12-41373 */ 2801 .driver_info = EM2860_BOARD_TVP5150_REFERENCE_DESIGN }, 2802 { USB_DEVICE(0x1b80, 0xe349), /* Magix USB Videowandler-2 */ 2803 .driver_info = EM2861_BOARD_MAGIX_VIDEOWANDLER2 }, 2804 { }, 2805}; 2806MODULE_DEVICE_TABLE(usb, em28xx_id_table); 2807 2808/* 2809 * EEPROM hash table for devices with generic USB IDs 2810 */ 2811static const struct em28xx_hash_table em28xx_eeprom_hash[] = { 2812 /* P/N: SA 60002070465 Tuner: TVF7533-MF */ 2813 {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF}, 2814 {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF}, 2815 {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028}, 2816 {0x166a0441, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028}, 2817 {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028}, 2818 {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028}, 2819 {0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT}, 2820 {0x4e913442, EM2882_BOARD_DIKOM_DK300, TUNER_XC2028}, 2821 {0x85dd871e, EM2882_BOARD_ZOLID_HYBRID_TV_STICK, TUNER_XC2028}, 2822}; 2823 2824/* I2C devicelist hash table for devices with generic USB IDs */ 2825static const struct em28xx_hash_table em28xx_i2c_hash[] = { 2826 {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC}, 2827 {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC}, 2828 {0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT}, 2829 {0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT}, 2830 {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC}, 2831 {0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF}, 2832 {0x6b800080, EM2874_BOARD_LEADERSHIP_ISDBT, TUNER_ABSENT}, 2833 {0x27e10080, EM2882_BOARD_ZOLID_HYBRID_TV_STICK, TUNER_XC2028}, 2834}; 2835 2836/* NOTE: introduce a separate hash table for devices with 16 bit eeproms */ 2837 2838int em28xx_tuner_callback(void *ptr, int component, int command, int arg) 2839{ 2840 struct em28xx_i2c_bus *i2c_bus = ptr; 2841 struct em28xx *dev = i2c_bus->dev; 2842 int rc = 0; 2843 2844 if (dev->tuner_type != TUNER_XC2028 && dev->tuner_type != TUNER_XC5000) 2845 return 0; 2846 2847 if (command != XC2028_TUNER_RESET && command != XC5000_TUNER_RESET) 2848 return 0; 2849 2850 rc = em28xx_gpio_set(dev, dev->board.tuner_gpio); 2851 2852 return rc; 2853} 2854EXPORT_SYMBOL_GPL(em28xx_tuner_callback); 2855 2856static inline void em28xx_set_xclk_i2c_speed(struct em28xx *dev) 2857{ 2858 const struct em28xx_board *board = &em28xx_boards[dev->model]; 2859 u8 xclk = board->xclk, i2c_speed = board->i2c_speed; 2860 2861 /* 2862 * Those are the default values for the majority of boards 2863 * Use those values if not specified otherwise at boards entry 2864 */ 2865 if (!xclk) 2866 xclk = EM28XX_XCLK_IR_RC5_MODE | 2867 EM28XX_XCLK_FREQUENCY_12MHZ; 2868 2869 em28xx_write_reg(dev, EM28XX_R0F_XCLK, xclk); 2870 2871 if (!i2c_speed) 2872 i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2873 EM28XX_I2C_FREQ_100_KHZ; 2874 2875 dev->i2c_speed = i2c_speed & 0x03; 2876 2877 if (!dev->board.is_em2800) 2878 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, i2c_speed); 2879 msleep(50); 2880} 2881 2882static inline void em28xx_set_model(struct em28xx *dev) 2883{ 2884 dev->board = em28xx_boards[dev->model]; 2885 dev->has_msp34xx = dev->board.has_msp34xx; 2886 dev->is_webcam = dev->board.is_webcam; 2887 2888 em28xx_set_xclk_i2c_speed(dev); 2889 2890 /* Should be initialized early, for I2C to work */ 2891 dev->def_i2c_bus = dev->board.def_i2c_bus; 2892} 2893 2894/* 2895 * Wait until AC97_RESET reports the expected value reliably before proceeding. 2896 * We also check that two unrelated registers accesses don't return the same 2897 * value to avoid premature return. 2898 * This procedure helps ensuring AC97 register accesses are reliable. 2899 */ 2900static int em28xx_wait_until_ac97_features_equals(struct em28xx *dev, 2901 int expected_feat) 2902{ 2903 unsigned long timeout = jiffies + msecs_to_jiffies(2000); 2904 int feat, powerdown; 2905 2906 while (time_is_after_jiffies(timeout)) { 2907 feat = em28xx_read_ac97(dev, AC97_RESET); 2908 if (feat < 0) 2909 return feat; 2910 2911 powerdown = em28xx_read_ac97(dev, AC97_POWERDOWN); 2912 if (powerdown < 0) 2913 return powerdown; 2914 2915 if (feat == expected_feat && feat != powerdown) 2916 return 0; 2917 2918 msleep(50); 2919 } 2920 2921 dev_warn(&dev->intf->dev, "AC97 registers access is not reliable !\n"); 2922 return -ETIMEDOUT; 2923} 2924 2925/* 2926 * Since em28xx_pre_card_setup() requires a proper dev->model, 2927 * this won't work for boards with generic PCI IDs 2928 */ 2929static void em28xx_pre_card_setup(struct em28xx *dev) 2930{ 2931 /* 2932 * Set the initial XCLK and I2C clock values based on the board 2933 * definition 2934 */ 2935 em28xx_set_xclk_i2c_speed(dev); 2936 2937 /* request some modules */ 2938 switch (dev->model) { 2939 case EM2861_BOARD_PLEXTOR_PX_TV100U: 2940 /* Sets the msp34xx I2S speed */ 2941 dev->i2s_speed = 2048000; 2942 break; 2943 case EM2861_BOARD_KWORLD_PVRTV_300U: 2944 case EM2880_BOARD_KWORLD_DVB_305U: 2945 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x6d); 2946 usleep_range(10000, 11000); 2947 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x7d); 2948 usleep_range(10000, 11000); 2949 break; 2950 case EM2870_BOARD_COMPRO_VIDEOMATE: 2951 /* 2952 * TODO: someone can do some cleanup here... 2953 * not everything's needed 2954 */ 2955 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00); 2956 usleep_range(10000, 11000); 2957 em28xx_write_reg(dev, EM2880_R04_GPO, 0x01); 2958 usleep_range(10000, 11000); 2959 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 2960 msleep(70); 2961 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc); 2962 msleep(70); 2963 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xdc); 2964 msleep(70); 2965 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc); 2966 msleep(70); 2967 break; 2968 case EM2870_BOARD_TERRATEC_XS_MT2060: 2969 /* 2970 * this device needs some gpio writes to get the DVB-T 2971 * demod work 2972 */ 2973 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2974 msleep(70); 2975 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde); 2976 msleep(70); 2977 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2978 msleep(70); 2979 break; 2980 case EM2870_BOARD_PINNACLE_PCTV_DVB: 2981 /* 2982 * this device needs some gpio writes to get the 2983 * DVB-T demod work 2984 */ 2985 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2986 msleep(70); 2987 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde); 2988 msleep(70); 2989 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2990 msleep(70); 2991 break; 2992 case EM2820_BOARD_GADMEI_UTV310: 2993 case EM2820_BOARD_MSI_VOX_USB_2: 2994 /* enables audio for that devices */ 2995 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 2996 break; 2997 2998 case EM2882_BOARD_KWORLD_ATSC_315U: 2999 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff); 3000 usleep_range(10000, 11000); 3001 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 3002 usleep_range(10000, 11000); 3003 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00); 3004 usleep_range(10000, 11000); 3005 em28xx_write_reg(dev, EM2880_R04_GPO, 0x08); 3006 usleep_range(10000, 11000); 3007 break; 3008 3009 case EM2860_BOARD_KAIOMY_TVNPC_U2: 3010 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1); 3011 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1); 3012 em28xx_write_regs(dev, 0x0d, "\x42", 1); 3013 em28xx_write_regs(dev, 0x08, "\xfd", 1); 3014 usleep_range(10000, 11000); 3015 em28xx_write_regs(dev, 0x08, "\xff", 1); 3016 usleep_range(10000, 11000); 3017 em28xx_write_regs(dev, 0x08, "\x7f", 1); 3018 usleep_range(10000, 11000); 3019 em28xx_write_regs(dev, 0x08, "\x6b", 1); 3020 3021 break; 3022 case EM2860_BOARD_EASYCAP: 3023 em28xx_write_regs(dev, 0x08, "\xf8", 1); 3024 break; 3025 3026 case EM2820_BOARD_IODATA_GVMVP_SZ: 3027 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff); 3028 msleep(70); 3029 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf7); 3030 usleep_range(10000, 11000); 3031 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 3032 msleep(70); 3033 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 3034 msleep(70); 3035 break; 3036 3037 case EM2860_BOARD_TERRATEC_GRABBY: 3038 /* 3039 * HACK?: Ensure AC97 register reading is reliable before 3040 * proceeding. In practice, this will wait about 1.6 seconds. 3041 */ 3042 em28xx_wait_until_ac97_features_equals(dev, 0x6a90); 3043 break; 3044 } 3045 3046 em28xx_gpio_set(dev, dev->board.tuner_gpio); 3047 em28xx_set_mode(dev, EM28XX_ANALOG_MODE); 3048 3049 /* Unlock device */ 3050 em28xx_set_mode(dev, EM28XX_SUSPEND); 3051} 3052 3053static int em28xx_hint_board(struct em28xx *dev) 3054{ 3055 int i; 3056 3057 if (dev->is_webcam) { 3058 if (dev->em28xx_sensor == EM28XX_MT9V011) { 3059 dev->model = EM2820_BOARD_SILVERCREST_WEBCAM; 3060 } else if (dev->em28xx_sensor == EM28XX_MT9M001 || 3061 dev->em28xx_sensor == EM28XX_MT9M111) { 3062 dev->model = EM2750_BOARD_UNKNOWN; 3063 } 3064 /* FIXME: IMPROVE ! */ 3065 3066 return 0; 3067 } 3068 3069 /* 3070 * HINT method: EEPROM 3071 * 3072 * This method works only for boards with eeprom. 3073 * Uses a hash of all eeprom bytes. The hash should be 3074 * unique for a vendor/tuner pair. 3075 * There are a high chance that tuners for different 3076 * video standards produce different hashes. 3077 */ 3078 for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) { 3079 if (dev->hash == em28xx_eeprom_hash[i].hash) { 3080 dev->model = em28xx_eeprom_hash[i].model; 3081 dev->tuner_type = em28xx_eeprom_hash[i].tuner; 3082 3083 dev_err(&dev->intf->dev, 3084 "Your board has no unique USB ID.\n" 3085 "A hint were successfully done, based on eeprom hash.\n" 3086 "This method is not 100%% failproof.\n" 3087 "If the board were misdetected, please email this log to:\n" 3088 "\tV4L Mailing List <linux-media@vger.kernel.org>\n" 3089 "Board detected as %s\n", 3090 em28xx_boards[dev->model].name); 3091 3092 return 0; 3093 } 3094 } 3095 3096 /* 3097 * HINT method: I2C attached devices 3098 * 3099 * This method works for all boards. 3100 * Uses a hash of i2c scanned devices. 3101 * Devices with the same i2c attached chips will 3102 * be considered equal. 3103 * This method is less precise than the eeprom one. 3104 */ 3105 3106 /* user did not request i2c scanning => do it now */ 3107 if (!dev->i2c_hash) 3108 em28xx_do_i2c_scan(dev, dev->def_i2c_bus); 3109 3110 for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) { 3111 if (dev->i2c_hash == em28xx_i2c_hash[i].hash) { 3112 dev->model = em28xx_i2c_hash[i].model; 3113 dev->tuner_type = em28xx_i2c_hash[i].tuner; 3114 dev_err(&dev->intf->dev, 3115 "Your board has no unique USB ID.\n" 3116 "A hint were successfully done, based on i2c devicelist hash.\n" 3117 "This method is not 100%% failproof.\n" 3118 "If the board were misdetected, please email this log to:\n" 3119 "\tV4L Mailing List <linux-media@vger.kernel.org>\n" 3120 "Board detected as %s\n", 3121 em28xx_boards[dev->model].name); 3122 3123 return 0; 3124 } 3125 } 3126 3127 dev_err(&dev->intf->dev, 3128 "Your board has no unique USB ID and thus need a hint to be detected.\n" 3129 "You may try to use card=<n> insmod option to workaround that.\n" 3130 "Please send an email with this log to:\n" 3131 "\tV4L Mailing List <linux-media@vger.kernel.org>\n" 3132 "Board eeprom hash is 0x%08lx\n" 3133 "Board i2c devicelist hash is 0x%08lx\n", 3134 dev->hash, dev->i2c_hash); 3135 3136 dev_err(&dev->intf->dev, 3137 "Here is a list of valid choices for the card=<n> insmod option:\n"); 3138 for (i = 0; i < em28xx_bcount; i++) { 3139 dev_err(&dev->intf->dev, 3140 " card=%d -> %s\n", i, em28xx_boards[i].name); 3141 } 3142 return -1; 3143} 3144 3145static void em28xx_card_setup(struct em28xx *dev) 3146{ 3147 int i, j, idx; 3148 bool duplicate_entry; 3149 3150 /* 3151 * If the device can be a webcam, seek for a sensor. 3152 * If sensor is not found, then it isn't a webcam. 3153 */ 3154 if (dev->is_webcam) { 3155 em28xx_detect_sensor(dev); 3156 if (dev->em28xx_sensor == EM28XX_NOSENSOR) 3157 /* NOTE: error/unknown sensor/no sensor */ 3158 dev->is_webcam = 0; 3159 } 3160 3161 switch (dev->model) { 3162 case EM2750_BOARD_UNKNOWN: 3163 case EM2820_BOARD_UNKNOWN: 3164 case EM2800_BOARD_UNKNOWN: 3165 /* 3166 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD. 3167 * 3168 * This occurs because they share identical USB vendor and 3169 * product IDs. 3170 * 3171 * What we do here is look up the EEPROM hash of the K-WORLD 3172 * and if it is found then we decide that we do not have 3173 * a DIGIVOX and reset the device to the K-WORLD instead. 3174 * 3175 * This solution is only valid if they do not share eeprom 3176 * hash identities which has not been determined as yet. 3177 */ 3178 if (em28xx_hint_board(dev) < 0) { 3179 dev_err(&dev->intf->dev, "Board not discovered\n"); 3180 } else { 3181 em28xx_set_model(dev); 3182 em28xx_pre_card_setup(dev); 3183 } 3184 break; 3185 default: 3186 em28xx_set_model(dev); 3187 } 3188 3189 dev_info(&dev->intf->dev, "Identified as %s (card=%d)\n", 3190 dev->board.name, dev->model); 3191 3192 dev->tuner_type = em28xx_boards[dev->model].tuner_type; 3193 3194 /* request some modules */ 3195 switch (dev->model) { 3196 case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2: 3197 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: 3198 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: 3199 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850: 3200 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: 3201 case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C: 3202 case EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB: 3203 case EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595: 3204 { 3205 struct tveeprom tv; 3206 3207 if (!dev->eedata) 3208 break; 3209#if defined(CONFIG_MODULES) && defined(MODULE) 3210 request_module("tveeprom"); 3211#endif 3212 /* Call first TVeeprom */ 3213 3214 tveeprom_hauppauge_analog(&tv, dev->eedata); 3215 3216 dev->tuner_type = tv.tuner_type; 3217 3218 if (tv.audio_processor == TVEEPROM_AUDPROC_MSP) { 3219 dev->i2s_speed = 2048000; 3220 dev->has_msp34xx = 1; 3221 } 3222 break; 3223 } 3224 case EM2882_BOARD_KWORLD_ATSC_315U: 3225 em28xx_write_reg(dev, 0x0d, 0x42); 3226 usleep_range(10000, 11000); 3227 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 3228 usleep_range(10000, 11000); 3229 break; 3230 case EM2820_BOARD_KWORLD_PVRTV2800RF: 3231 /* GPIO enables sound on KWORLD PVR TV 2800RF */ 3232 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf9); 3233 break; 3234 case EM2820_BOARD_UNKNOWN: 3235 case EM2800_BOARD_UNKNOWN: 3236 /* 3237 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD. 3238 * 3239 * This occurs because they share identical USB vendor and 3240 * product IDs. 3241 * 3242 * What we do here is look up the EEPROM hash of the K-WORLD 3243 * and if it is found then we decide that we do not have 3244 * a DIGIVOX and reset the device to the K-WORLD instead. 3245 * 3246 * This solution is only valid if they do not share eeprom 3247 * hash identities which has not been determined as yet. 3248 */ 3249 case EM2880_BOARD_MSI_DIGIVOX_AD: 3250 if (!em28xx_hint_board(dev)) 3251 em28xx_set_model(dev); 3252 3253 /* 3254 * In cases where we had to use a board hint, the call to 3255 * em28xx_set_mode() in em28xx_pre_card_setup() was a no-op, 3256 * so make the call now so the analog GPIOs are set properly 3257 * before probing the i2c bus. 3258 */ 3259 em28xx_gpio_set(dev, dev->board.tuner_gpio); 3260 em28xx_set_mode(dev, EM28XX_ANALOG_MODE); 3261 break; 3262 3263 /* 3264 * The Dikom DK300 is detected as an Kworld VS-DVB-T 323UR. 3265 * 3266 * This occurs because they share identical USB vendor and 3267 * product IDs. 3268 * 3269 * What we do here is look up the EEPROM hash of the Dikom 3270 * and if it is found then we decide that we do not have 3271 * a Kworld and reset the device to the Dikom instead. 3272 * 3273 * This solution is only valid if they do not share eeprom 3274 * hash identities which has not been determined as yet. 3275 */ 3276 case EM2882_BOARD_KWORLD_VS_DVBT: 3277 if (!em28xx_hint_board(dev)) 3278 em28xx_set_model(dev); 3279 3280 /* 3281 * In cases where we had to use a board hint, the call to 3282 * em28xx_set_mode() in em28xx_pre_card_setup() was a no-op, 3283 * so make the call now so the analog GPIOs are set properly 3284 * before probing the i2c bus. 3285 */ 3286 em28xx_gpio_set(dev, dev->board.tuner_gpio); 3287 em28xx_set_mode(dev, EM28XX_ANALOG_MODE); 3288 break; 3289 } 3290 3291 if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) { 3292 dev_err(&dev->intf->dev, 3293 "\n\n" 3294 "The support for this board weren't valid yet.\n" 3295 "Please send a report of having this working\n" 3296 "not to V4L mailing list (and/or to other addresses)\n\n"); 3297 } 3298 3299 /* Free eeprom data memory */ 3300 kfree(dev->eedata); 3301 dev->eedata = NULL; 3302 3303 /* Allow override tuner type by a module parameter */ 3304 if (tuner >= 0) 3305 dev->tuner_type = tuner; 3306 3307 /* 3308 * Dynamically generate a list of valid audio inputs for this 3309 * specific board, mapping them via enum em28xx_amux. 3310 */ 3311 3312 idx = 0; 3313 for (i = 0; i < MAX_EM28XX_INPUT; i++) { 3314 if (!INPUT(i)->type) 3315 continue; 3316 3317 /* Skip already mapped audio inputs */ 3318 duplicate_entry = false; 3319 for (j = 0; j < idx; j++) { 3320 if (INPUT(i)->amux == dev->amux_map[j]) { 3321 duplicate_entry = true; 3322 break; 3323 } 3324 } 3325 if (duplicate_entry) 3326 continue; 3327 3328 dev->amux_map[idx++] = INPUT(i)->amux; 3329 } 3330 for (; idx < MAX_EM28XX_INPUT; idx++) 3331 dev->amux_map[idx] = EM28XX_AMUX_UNUSED; 3332} 3333 3334void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl) 3335{ 3336 memset(ctl, 0, sizeof(*ctl)); 3337 3338 ctl->fname = XC2028_DEFAULT_FIRMWARE; 3339 ctl->max_len = 64; 3340 ctl->mts = em28xx_boards[dev->model].mts_firmware; 3341 3342 switch (dev->model) { 3343 case EM2880_BOARD_EMPIRE_DUAL_TV: 3344 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: 3345 case EM2882_BOARD_TERRATEC_HYBRID_XS: 3346 case EM2880_BOARD_TERRATEC_HYBRID_XS: 3347 case EM2880_BOARD_TERRATEC_HYBRID_XS_FR: 3348 case EM2881_BOARD_PINNACLE_HYBRID_PRO: 3349 case EM2882_BOARD_ZOLID_HYBRID_TV_STICK: 3350 ctl->demod = XC3028_FE_ZARLINK456; 3351 break; 3352 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: 3353 case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E: 3354 ctl->demod = XC3028_FE_DEFAULT; 3355 break; 3356 case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600: 3357 ctl->demod = XC3028_FE_DEFAULT; 3358 ctl->fname = XC3028L_DEFAULT_FIRMWARE; 3359 break; 3360 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850: 3361 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: 3362 case EM2880_BOARD_PINNACLE_PCTV_HD_PRO: 3363 /* FIXME: Better to specify the needed IF */ 3364 ctl->demod = XC3028_FE_DEFAULT; 3365 break; 3366 case EM2883_BOARD_KWORLD_HYBRID_330U: 3367 case EM2882_BOARD_DIKOM_DK300: 3368 case EM2882_BOARD_KWORLD_VS_DVBT: 3369 ctl->demod = XC3028_FE_CHINA; 3370 ctl->fname = XC2028_DEFAULT_FIRMWARE; 3371 break; 3372 case EM2882_BOARD_EVGA_INDTUBE: 3373 ctl->demod = XC3028_FE_CHINA; 3374 ctl->fname = XC3028L_DEFAULT_FIRMWARE; 3375 break; 3376 default: 3377 ctl->demod = XC3028_FE_OREN538; 3378 } 3379} 3380EXPORT_SYMBOL_GPL(em28xx_setup_xc3028); 3381 3382static void request_module_async(struct work_struct *work) 3383{ 3384 struct em28xx *dev = container_of(work, 3385 struct em28xx, request_module_wk); 3386 3387 /* 3388 * The em28xx extensions can be modules or builtin. If the 3389 * modules are already loaded or are built in, those extensions 3390 * can be initialised right now. Otherwise, the module init 3391 * code will do it. 3392 */ 3393 3394 /* 3395 * Devices with an audio-only intf also have a V4L/DVB/RC 3396 * intf. Don't register extensions twice on those devices. 3397 */ 3398 if (dev->is_audio_only) { 3399#if defined(CONFIG_MODULES) && defined(MODULE) 3400 request_module("em28xx-alsa"); 3401#endif 3402 return; 3403 } 3404 3405 em28xx_init_extension(dev); 3406 3407#if defined(CONFIG_MODULES) && defined(MODULE) 3408 if (dev->has_video) 3409 request_module("em28xx-v4l"); 3410 if (dev->usb_audio_type == EM28XX_USB_AUDIO_CLASS) 3411 request_module("snd-usb-audio"); 3412 else if (dev->usb_audio_type == EM28XX_USB_AUDIO_VENDOR) 3413 request_module("em28xx-alsa"); 3414 if (dev->board.has_dvb) 3415 request_module("em28xx-dvb"); 3416 if (dev->board.buttons || 3417 ((dev->board.ir_codes || dev->board.has_ir_i2c) && !disable_ir)) 3418 request_module("em28xx-rc"); 3419#endif /* CONFIG_MODULES */ 3420} 3421 3422static void request_modules(struct em28xx *dev) 3423{ 3424 INIT_WORK(&dev->request_module_wk, request_module_async); 3425 schedule_work(&dev->request_module_wk); 3426} 3427 3428static void flush_request_modules(struct em28xx *dev) 3429{ 3430 flush_work(&dev->request_module_wk); 3431} 3432 3433static int em28xx_media_device_init(struct em28xx *dev, 3434 struct usb_device *udev) 3435{ 3436#ifdef CONFIG_MEDIA_CONTROLLER 3437 struct media_device *mdev; 3438 3439 mdev = kzalloc(sizeof(*mdev), GFP_KERNEL); 3440 if (!mdev) 3441 return -ENOMEM; 3442 3443 if (udev->product) 3444 media_device_usb_init(mdev, udev, udev->product); 3445 else if (udev->manufacturer) 3446 media_device_usb_init(mdev, udev, udev->manufacturer); 3447 else 3448 media_device_usb_init(mdev, udev, dev_name(&dev->intf->dev)); 3449 3450 dev->media_dev = mdev; 3451#endif 3452 return 0; 3453} 3454 3455static void em28xx_unregister_media_device(struct em28xx *dev) 3456{ 3457#ifdef CONFIG_MEDIA_CONTROLLER 3458 if (dev->media_dev) { 3459 media_device_unregister(dev->media_dev); 3460 media_device_cleanup(dev->media_dev); 3461 kfree(dev->media_dev); 3462 dev->media_dev = NULL; 3463 } 3464#endif 3465} 3466 3467/* 3468 * em28xx_release_resources() 3469 * unregisters the v4l2,i2c and usb devices 3470 * called when the device gets disconnected or at module unload 3471 */ 3472static void em28xx_release_resources(struct em28xx *dev) 3473{ 3474 struct usb_device *udev = interface_to_usbdev(dev->intf); 3475 3476 /*FIXME: I2C IR should be disconnected */ 3477 3478 mutex_lock(&dev->lock); 3479 3480 em28xx_unregister_media_device(dev); 3481 3482 if (dev->def_i2c_bus) 3483 em28xx_i2c_unregister(dev, 1); 3484 em28xx_i2c_unregister(dev, 0); 3485 3486 if (dev->ts == PRIMARY_TS) 3487 usb_put_dev(udev); 3488 3489 /* Mark device as unused */ 3490 clear_bit(dev->devno, em28xx_devused); 3491 3492 mutex_unlock(&dev->lock); 3493}; 3494 3495/** 3496 * em28xx_free_device() - Free em28xx device 3497 * 3498 * @ref: struct kref for em28xx device 3499 * 3500 * This is called when all extensions and em28xx core unregisters a device 3501 */ 3502void em28xx_free_device(struct kref *ref) 3503{ 3504 struct em28xx *dev = kref_to_dev(ref); 3505 3506 dev_info(&dev->intf->dev, "Freeing device\n"); 3507 3508 if (!dev->disconnected) 3509 em28xx_release_resources(dev); 3510 3511 if (dev->ts == PRIMARY_TS) 3512 kfree(dev->alt_max_pkt_size_isoc); 3513 3514 kfree(dev); 3515} 3516EXPORT_SYMBOL_GPL(em28xx_free_device); 3517 3518/* 3519 * em28xx_init_dev() 3520 * allocates and inits the device structs, registers i2c bus and v4l device 3521 */ 3522static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev, 3523 struct usb_interface *intf, 3524 int minor) 3525{ 3526 int retval; 3527 const char *chip_name = NULL; 3528 3529 dev->intf = intf; 3530 mutex_init(&dev->ctrl_urb_lock); 3531 spin_lock_init(&dev->slock); 3532 3533 dev->em28xx_write_regs = em28xx_write_regs; 3534 dev->em28xx_read_reg = em28xx_read_reg; 3535 dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len; 3536 dev->em28xx_write_regs_req = em28xx_write_regs_req; 3537 dev->em28xx_read_reg_req = em28xx_read_reg_req; 3538 dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800; 3539 3540 em28xx_set_model(dev); 3541 3542 dev->wait_after_write = 5; 3543 3544 /* Based on the Chip ID, set the device configuration */ 3545 retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID); 3546 if (retval > 0) { 3547 dev->chip_id = retval; 3548 3549 switch (dev->chip_id) { 3550 case CHIP_ID_EM2800: 3551 chip_name = "em2800"; 3552 break; 3553 case CHIP_ID_EM2710: 3554 chip_name = "em2710"; 3555 break; 3556 case CHIP_ID_EM2750: 3557 chip_name = "em2750"; 3558 break; 3559 case CHIP_ID_EM2765: 3560 chip_name = "em2765"; 3561 dev->wait_after_write = 0; 3562 dev->is_em25xx = 1; 3563 dev->eeprom_addrwidth_16bit = 1; 3564 break; 3565 case CHIP_ID_EM2820: 3566 chip_name = "em2710/2820"; 3567 if (le16_to_cpu(udev->descriptor.idVendor) == 0xeb1a) { 3568 __le16 idProd = udev->descriptor.idProduct; 3569 3570 if (le16_to_cpu(idProd) == 0x2710) 3571 chip_name = "em2710"; 3572 else if (le16_to_cpu(idProd) == 0x2820) 3573 chip_name = "em2820"; 3574 } 3575 /* NOTE: the em2820 is used in webcams, too ! */ 3576 break; 3577 case CHIP_ID_EM2840: 3578 chip_name = "em2840"; 3579 break; 3580 case CHIP_ID_EM2860: 3581 chip_name = "em2860"; 3582 break; 3583 case CHIP_ID_EM2870: 3584 chip_name = "em2870"; 3585 dev->wait_after_write = 0; 3586 break; 3587 case CHIP_ID_EM2874: 3588 chip_name = "em2874"; 3589 dev->wait_after_write = 0; 3590 dev->eeprom_addrwidth_16bit = 1; 3591 break; 3592 case CHIP_ID_EM28174: 3593 chip_name = "em28174"; 3594 dev->wait_after_write = 0; 3595 dev->eeprom_addrwidth_16bit = 1; 3596 break; 3597 case CHIP_ID_EM28178: 3598 chip_name = "em28178"; 3599 dev->wait_after_write = 0; 3600 dev->eeprom_addrwidth_16bit = 1; 3601 break; 3602 case CHIP_ID_EM2883: 3603 chip_name = "em2882/3"; 3604 dev->wait_after_write = 0; 3605 break; 3606 case CHIP_ID_EM2884: 3607 chip_name = "em2884"; 3608 dev->wait_after_write = 0; 3609 dev->eeprom_addrwidth_16bit = 1; 3610 break; 3611 } 3612 } 3613 if (!chip_name) 3614 dev_info(&dev->intf->dev, 3615 "unknown em28xx chip ID (%d)\n", dev->chip_id); 3616 else 3617 dev_info(&dev->intf->dev, "chip ID is %s\n", chip_name); 3618 3619 em28xx_media_device_init(dev, udev); 3620 3621 if (dev->is_audio_only) { 3622 retval = em28xx_audio_setup(dev); 3623 if (retval) { 3624 retval = -ENODEV; 3625 goto err_deinit_media; 3626 } 3627 em28xx_init_extension(dev); 3628 3629 return 0; 3630 } 3631 3632 em28xx_pre_card_setup(dev); 3633 3634 rt_mutex_init(&dev->i2c_bus_lock); 3635 3636 /* register i2c bus 0 */ 3637 if (dev->board.is_em2800) 3638 retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM2800); 3639 else 3640 retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM28XX); 3641 if (retval < 0) { 3642 dev_err(&dev->intf->dev, 3643 "%s: em28xx_i2c_register bus 0 - error [%d]!\n", 3644 __func__, retval); 3645 goto err_deinit_media; 3646 } 3647 3648 /* register i2c bus 1 */ 3649 if (dev->def_i2c_bus) { 3650 if (dev->is_em25xx) 3651 retval = em28xx_i2c_register(dev, 1, 3652 EM28XX_I2C_ALGO_EM25XX_BUS_B); 3653 else 3654 retval = em28xx_i2c_register(dev, 1, 3655 EM28XX_I2C_ALGO_EM28XX); 3656 if (retval < 0) { 3657 dev_err(&dev->intf->dev, 3658 "%s: em28xx_i2c_register bus 1 - error [%d]!\n", 3659 __func__, retval); 3660 3661 goto err_unreg_i2c; 3662 } 3663 } 3664 3665 /* Do board specific init and eeprom reading */ 3666 em28xx_card_setup(dev); 3667 3668 return 0; 3669 3670err_unreg_i2c: 3671 em28xx_i2c_unregister(dev, 0); 3672err_deinit_media: 3673 em28xx_unregister_media_device(dev); 3674 return retval; 3675} 3676 3677static int em28xx_duplicate_dev(struct em28xx *dev) 3678{ 3679 int nr; 3680 struct em28xx *sec_dev = kmemdup(dev, sizeof(*sec_dev), GFP_KERNEL); 3681 3682 if (!sec_dev) { 3683 dev->dev_next = NULL; 3684 return -ENOMEM; 3685 } 3686 /* Check to see next free device and mark as used */ 3687 do { 3688 nr = find_first_zero_bit(em28xx_devused, EM28XX_MAXBOARDS); 3689 if (nr >= EM28XX_MAXBOARDS) { 3690 /* No free device slots */ 3691 dev_warn(&dev->intf->dev, ": Supports only %i em28xx boards.\n", 3692 EM28XX_MAXBOARDS); 3693 kfree(sec_dev); 3694 dev->dev_next = NULL; 3695 return -ENOMEM; 3696 } 3697 } while (test_and_set_bit(nr, em28xx_devused)); 3698 sec_dev->devno = nr; 3699 snprintf(sec_dev->name, 28, "em28xx #%d", nr); 3700 sec_dev->dev_next = NULL; 3701 dev->dev_next = sec_dev; 3702 return 0; 3703} 3704 3705/* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */ 3706#define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03)) 3707 3708static void em28xx_check_usb_descriptor(struct em28xx *dev, 3709 struct usb_device *udev, 3710 struct usb_interface *intf, 3711 int alt, int ep, 3712 bool *has_vendor_audio, 3713 bool *has_video, 3714 bool *has_dvb) 3715{ 3716 const struct usb_endpoint_descriptor *e; 3717 int sizedescr, size; 3718 3719 /* 3720 * NOTE: 3721 * 3722 * Old logic with support for isoc transfers only was: 3723 * 0x82 isoc => analog 3724 * 0x83 isoc => audio 3725 * 0x84 isoc => digital 3726 * 3727 * New logic with support for bulk transfers 3728 * 0x82 isoc => analog 3729 * 0x82 bulk => analog 3730 * 0x83 isoc* => audio 3731 * 0x84 isoc => digital 3732 * 0x84 bulk => analog or digital** 3733 * 0x85 isoc => digital TS2 3734 * 0x85 bulk => digital TS2 3735 * (*: audio should always be isoc) 3736 * (**: analog, if ep 0x82 is isoc, otherwise digital) 3737 * 3738 * The new logic preserves backwards compatibility and 3739 * reflects the endpoint configurations we have seen 3740 * so far. But there might be devices for which this 3741 * logic is not sufficient... 3742 */ 3743 3744 e = &intf->altsetting[alt].endpoint[ep].desc; 3745 3746 if (!usb_endpoint_dir_in(e)) 3747 return; 3748 3749 sizedescr = le16_to_cpu(e->wMaxPacketSize); 3750 size = sizedescr & 0x7ff; 3751 3752 if (udev->speed == USB_SPEED_HIGH) 3753 size = size * hb_mult(sizedescr); 3754 3755 /* Only inspect input endpoints */ 3756 3757 switch (e->bEndpointAddress) { 3758 case 0x82: 3759 *has_video = true; 3760 if (usb_endpoint_xfer_isoc(e)) { 3761 dev->analog_ep_isoc = e->bEndpointAddress; 3762 dev->alt_max_pkt_size_isoc[alt] = size; 3763 } else if (usb_endpoint_xfer_bulk(e)) { 3764 dev->analog_ep_bulk = e->bEndpointAddress; 3765 } 3766 return; 3767 case 0x83: 3768 if (usb_endpoint_xfer_isoc(e)) 3769 *has_vendor_audio = true; 3770 else 3771 dev_err(&intf->dev, 3772 "error: skipping audio endpoint 0x83, because it uses bulk transfers !\n"); 3773 return; 3774 case 0x84: 3775 if (*has_video && (usb_endpoint_xfer_bulk(e))) { 3776 dev->analog_ep_bulk = e->bEndpointAddress; 3777 } else { 3778 if (usb_endpoint_xfer_isoc(e)) { 3779 if (size > dev->dvb_max_pkt_size_isoc) { 3780 /* 3781 * 2) some manufacturers (e.g. Terratec) 3782 * disable endpoints by setting 3783 * wMaxPacketSize to 0 bytes for all 3784 * alt settings. So far, we've seen 3785 * this for DVB isoc endpoints only. 3786 */ 3787 *has_dvb = true; 3788 dev->dvb_ep_isoc = e->bEndpointAddress; 3789 dev->dvb_max_pkt_size_isoc = size; 3790 dev->dvb_alt_isoc = alt; 3791 } 3792 } else { 3793 *has_dvb = true; 3794 dev->dvb_ep_bulk = e->bEndpointAddress; 3795 } 3796 } 3797 return; 3798 case 0x85: 3799 if (usb_endpoint_xfer_isoc(e)) { 3800 if (size > dev->dvb_max_pkt_size_isoc_ts2) { 3801 dev->dvb_ep_isoc_ts2 = e->bEndpointAddress; 3802 dev->dvb_max_pkt_size_isoc_ts2 = size; 3803 dev->dvb_alt_isoc = alt; 3804 } 3805 } else { 3806 dev->dvb_ep_bulk_ts2 = e->bEndpointAddress; 3807 } 3808 return; 3809 } 3810} 3811 3812/* 3813 * em28xx_usb_probe() 3814 * checks for supported devices 3815 */ 3816static int em28xx_usb_probe(struct usb_interface *intf, 3817 const struct usb_device_id *id) 3818{ 3819 struct usb_device *udev; 3820 struct em28xx *dev = NULL; 3821 int retval; 3822 bool has_vendor_audio = false, has_video = false, has_dvb = false; 3823 int i, nr, try_bulk; 3824 const int ifnum = intf->altsetting[0].desc.bInterfaceNumber; 3825 char *speed; 3826 3827 udev = usb_get_dev(interface_to_usbdev(intf)); 3828 3829 /* Check to see next free device and mark as used */ 3830 do { 3831 nr = find_first_zero_bit(em28xx_devused, EM28XX_MAXBOARDS); 3832 if (nr >= EM28XX_MAXBOARDS) { 3833 /* No free device slots */ 3834 dev_err(&intf->dev, 3835 "Driver supports up to %i em28xx boards.\n", 3836 EM28XX_MAXBOARDS); 3837 retval = -ENOMEM; 3838 goto err_no_slot; 3839 } 3840 } while (test_and_set_bit(nr, em28xx_devused)); 3841 3842 /* Don't register audio interfaces */ 3843 if (intf->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) { 3844 dev_info(&intf->dev, 3845 "audio device (%04x:%04x): interface %i, class %i\n", 3846 le16_to_cpu(udev->descriptor.idVendor), 3847 le16_to_cpu(udev->descriptor.idProduct), 3848 ifnum, 3849 intf->altsetting[0].desc.bInterfaceClass); 3850 3851 retval = -ENODEV; 3852 goto err; 3853 } 3854 3855 /* allocate memory for our device state and initialize it */ 3856 dev = kzalloc(sizeof(*dev), GFP_KERNEL); 3857 if (!dev) { 3858 retval = -ENOMEM; 3859 goto err; 3860 } 3861 3862 /* compute alternate max packet sizes */ 3863 dev->alt_max_pkt_size_isoc = kcalloc(intf->num_altsetting, 3864 sizeof(dev->alt_max_pkt_size_isoc[0]), 3865 GFP_KERNEL); 3866 if (!dev->alt_max_pkt_size_isoc) { 3867 kfree(dev); 3868 retval = -ENOMEM; 3869 goto err; 3870 } 3871 3872 /* Get endpoints */ 3873 for (i = 0; i < intf->num_altsetting; i++) { 3874 int ep; 3875 3876 for (ep = 0; 3877 ep < intf->altsetting[i].desc.bNumEndpoints; 3878 ep++) 3879 em28xx_check_usb_descriptor(dev, udev, intf, 3880 i, ep, 3881 &has_vendor_audio, 3882 &has_video, 3883 &has_dvb); 3884 } 3885 3886 if (!(has_vendor_audio || has_video || has_dvb)) { 3887 retval = -ENODEV; 3888 goto err_free; 3889 } 3890 3891 switch (udev->speed) { 3892 case USB_SPEED_LOW: 3893 speed = "1.5"; 3894 break; 3895 case USB_SPEED_UNKNOWN: 3896 case USB_SPEED_FULL: 3897 speed = "12"; 3898 break; 3899 case USB_SPEED_HIGH: 3900 speed = "480"; 3901 break; 3902 default: 3903 speed = "unknown"; 3904 } 3905 3906 dev_info(&intf->dev, 3907 "New device %s %s @ %s Mbps (%04x:%04x, interface %d, class %d)\n", 3908 udev->manufacturer ? udev->manufacturer : "", 3909 udev->product ? udev->product : "", 3910 speed, 3911 le16_to_cpu(udev->descriptor.idVendor), 3912 le16_to_cpu(udev->descriptor.idProduct), 3913 ifnum, 3914 intf->altsetting->desc.bInterfaceNumber); 3915 3916 /* 3917 * Make sure we have 480 Mbps of bandwidth, otherwise things like 3918 * video stream wouldn't likely work, since 12 Mbps is generally 3919 * not enough even for most Digital TV streams. 3920 */ 3921 if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) { 3922 dev_err(&intf->dev, "Device initialization failed.\n"); 3923 dev_err(&intf->dev, 3924 "Device must be connected to a high-speed USB 2.0 port.\n"); 3925 retval = -ENODEV; 3926 goto err_free; 3927 } 3928 3929 kref_init(&dev->ref); 3930 3931 dev->devno = nr; 3932 dev->model = id->driver_info; 3933 dev->alt = -1; 3934 dev->is_audio_only = has_vendor_audio && !(has_video || has_dvb); 3935 dev->has_video = has_video; 3936 dev->ifnum = ifnum; 3937 3938 dev->ts = PRIMARY_TS; 3939 snprintf(dev->name, 28, "em28xx"); 3940 dev->dev_next = NULL; 3941 3942 if (has_vendor_audio) { 3943 dev_info(&intf->dev, 3944 "Audio interface %i found (Vendor Class)\n", ifnum); 3945 dev->usb_audio_type = EM28XX_USB_AUDIO_VENDOR; 3946 } 3947 /* Checks if audio is provided by a USB Audio Class intf */ 3948 for (i = 0; i < udev->config->desc.bNumInterfaces; i++) { 3949 struct usb_interface *uif = udev->config->interface[i]; 3950 3951 if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) { 3952 if (has_vendor_audio) 3953 dev_err(&intf->dev, 3954 "em28xx: device seems to have vendor AND usb audio class interfaces !\n" 3955 "\t\tThe vendor interface will be ignored. Please contact the developers <linux-media@vger.kernel.org>\n"); 3956 dev->usb_audio_type = EM28XX_USB_AUDIO_CLASS; 3957 break; 3958 } 3959 } 3960 3961 if (has_video) 3962 dev_info(&intf->dev, "Video interface %i found:%s%s\n", 3963 ifnum, 3964 dev->analog_ep_bulk ? " bulk" : "", 3965 dev->analog_ep_isoc ? " isoc" : ""); 3966 if (has_dvb) 3967 dev_info(&intf->dev, "DVB interface %i found:%s%s\n", 3968 ifnum, 3969 dev->dvb_ep_bulk ? " bulk" : "", 3970 dev->dvb_ep_isoc ? " isoc" : ""); 3971 3972 dev->num_alt = intf->num_altsetting; 3973 3974 if ((unsigned int)card[nr] < em28xx_bcount) 3975 dev->model = card[nr]; 3976 3977 /* save our data pointer in this intf device */ 3978 usb_set_intfdata(intf, dev); 3979 3980 /* allocate device struct and check if the device is a webcam */ 3981 mutex_init(&dev->lock); 3982 retval = em28xx_init_dev(dev, udev, intf, nr); 3983 if (retval) 3984 goto err_free; 3985 3986 if (usb_xfer_mode < 0) { 3987 if (dev->is_webcam) 3988 try_bulk = 1; 3989 else 3990 try_bulk = 0; 3991 } else { 3992 try_bulk = usb_xfer_mode > 0; 3993 } 3994 3995 /* Disable V4L2 if the device doesn't have a decoder or image sensor */ 3996 if (has_video && 3997 dev->board.decoder == EM28XX_NODECODER && 3998 dev->em28xx_sensor == EM28XX_NOSENSOR) { 3999 dev_err(&intf->dev, 4000 "Currently, V4L2 is not supported on this model\n"); 4001 has_video = false; 4002 dev->has_video = false; 4003 } 4004 4005 if (dev->board.has_dual_ts && 4006 (dev->tuner_type != TUNER_ABSENT || INPUT(0)->type)) { 4007 /* 4008 * The logic with sets alternate is not ready for dual-tuners 4009 * which analog modes. 4010 */ 4011 dev_err(&intf->dev, 4012 "We currently don't support analog TV or stream capture on dual tuners.\n"); 4013 has_video = false; 4014 } 4015 4016 /* Select USB transfer types to use */ 4017 if (has_video) { 4018 if (!dev->analog_ep_isoc || (try_bulk && dev->analog_ep_bulk)) 4019 dev->analog_xfer_bulk = 1; 4020 dev_info(&intf->dev, "analog set to %s mode.\n", 4021 dev->analog_xfer_bulk ? "bulk" : "isoc"); 4022 } 4023 if (has_dvb) { 4024 if (!dev->dvb_ep_isoc || (try_bulk && dev->dvb_ep_bulk)) 4025 dev->dvb_xfer_bulk = 1; 4026 dev_info(&intf->dev, "dvb set to %s mode.\n", 4027 dev->dvb_xfer_bulk ? "bulk" : "isoc"); 4028 } 4029 4030 if (dev->board.has_dual_ts && em28xx_duplicate_dev(dev) == 0) { 4031 kref_init(&dev->dev_next->ref); 4032 4033 dev->dev_next->ts = SECONDARY_TS; 4034 dev->dev_next->alt = -1; 4035 dev->dev_next->is_audio_only = has_vendor_audio && 4036 !(has_video || has_dvb); 4037 dev->dev_next->has_video = false; 4038 dev->dev_next->ifnum = ifnum; 4039 dev->dev_next->model = id->driver_info; 4040 4041 mutex_init(&dev->dev_next->lock); 4042 retval = em28xx_init_dev(dev->dev_next, udev, intf, 4043 dev->dev_next->devno); 4044 if (retval) 4045 goto err_free; 4046 4047 dev->dev_next->board.ir_codes = NULL; /* No IR for 2nd tuner */ 4048 dev->dev_next->board.has_ir_i2c = 0; /* No IR for 2nd tuner */ 4049 4050 if (usb_xfer_mode < 0) { 4051 if (dev->dev_next->is_webcam) 4052 try_bulk = 1; 4053 else 4054 try_bulk = 0; 4055 } else { 4056 try_bulk = usb_xfer_mode > 0; 4057 } 4058 4059 /* Select USB transfer types to use */ 4060 if (has_dvb) { 4061 if (!dev->dvb_ep_isoc_ts2 || 4062 (try_bulk && dev->dvb_ep_bulk_ts2)) 4063 dev->dev_next->dvb_xfer_bulk = 1; 4064 dev_info(&dev->intf->dev, "dvb ts2 set to %s mode.\n", 4065 dev->dev_next->dvb_xfer_bulk ? "bulk" : "isoc"); 4066 } 4067 4068 dev->dev_next->dvb_ep_isoc = dev->dvb_ep_isoc_ts2; 4069 dev->dev_next->dvb_ep_bulk = dev->dvb_ep_bulk_ts2; 4070 dev->dev_next->dvb_max_pkt_size_isoc = dev->dvb_max_pkt_size_isoc_ts2; 4071 dev->dev_next->dvb_alt_isoc = dev->dvb_alt_isoc; 4072 4073 /* Configure hardware to support TS2*/ 4074 if (dev->dvb_xfer_bulk) { 4075 /* The ep4 and ep5 are configured for BULK */ 4076 em28xx_write_reg(dev, 0x0b, 0x96); 4077 mdelay(100); 4078 em28xx_write_reg(dev, 0x0b, 0x80); 4079 mdelay(100); 4080 } else { 4081 /* The ep4 and ep5 are configured for ISO */ 4082 em28xx_write_reg(dev, 0x0b, 0x96); 4083 mdelay(100); 4084 em28xx_write_reg(dev, 0x0b, 0x82); 4085 mdelay(100); 4086 } 4087 } 4088 4089 request_modules(dev); 4090 4091 /* 4092 * Do it at the end, to reduce dynamic configuration changes during 4093 * the device init. Yet, as request_modules() can be async, the 4094 * topology will likely change after the load of the em28xx subdrivers. 4095 */ 4096#ifdef CONFIG_MEDIA_CONTROLLER 4097 /* 4098 * No need to check the return value, the device will still be 4099 * usable without media controller API. 4100 */ 4101 retval = media_device_register(dev->media_dev); 4102#endif 4103 4104 return 0; 4105 4106err_free: 4107 kfree(dev->alt_max_pkt_size_isoc); 4108 kfree(dev); 4109 4110err: 4111 clear_bit(nr, em28xx_devused); 4112 4113err_no_slot: 4114 usb_put_dev(udev); 4115 return retval; 4116} 4117 4118/* 4119 * em28xx_usb_disconnect() 4120 * called when the device gets disconnected 4121 * video device will be unregistered on v4l2_close in case it is still open 4122 */ 4123static void em28xx_usb_disconnect(struct usb_interface *intf) 4124{ 4125 struct em28xx *dev; 4126 4127 dev = usb_get_intfdata(intf); 4128 usb_set_intfdata(intf, NULL); 4129 4130 if (!dev) 4131 return; 4132 4133 if (dev->dev_next) { 4134 dev->dev_next->disconnected = 1; 4135 dev_info(&dev->intf->dev, "Disconnecting %s\n", 4136 dev->dev_next->name); 4137 } 4138 4139 dev->disconnected = 1; 4140 4141 dev_info(&dev->intf->dev, "Disconnecting %s\n", dev->name); 4142 4143 flush_request_modules(dev); 4144 4145 em28xx_close_extension(dev); 4146 4147 if (dev->dev_next) 4148 em28xx_release_resources(dev->dev_next); 4149 em28xx_release_resources(dev); 4150 4151 if (dev->dev_next) { 4152 kref_put(&dev->dev_next->ref, em28xx_free_device); 4153 dev->dev_next = NULL; 4154 } 4155 kref_put(&dev->ref, em28xx_free_device); 4156} 4157 4158static int em28xx_usb_suspend(struct usb_interface *intf, 4159 pm_message_t message) 4160{ 4161 struct em28xx *dev; 4162 4163 dev = usb_get_intfdata(intf); 4164 if (!dev) 4165 return 0; 4166 em28xx_suspend_extension(dev); 4167 return 0; 4168} 4169 4170static int em28xx_usb_resume(struct usb_interface *intf) 4171{ 4172 struct em28xx *dev; 4173 4174 dev = usb_get_intfdata(intf); 4175 if (!dev) 4176 return 0; 4177 em28xx_resume_extension(dev); 4178 return 0; 4179} 4180 4181static struct usb_driver em28xx_usb_driver = { 4182 .name = "em28xx", 4183 .probe = em28xx_usb_probe, 4184 .disconnect = em28xx_usb_disconnect, 4185 .suspend = em28xx_usb_suspend, 4186 .resume = em28xx_usb_resume, 4187 .reset_resume = em28xx_usb_resume, 4188 .id_table = em28xx_id_table, 4189}; 4190 4191module_usb_driver(em28xx_usb_driver); 4192