1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 4 bttv-cards.c 5 6 this file has configuration information - card-specific stuff 7 like the big tvcards array for the most part 8 9 Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de) 10 & Marcus Metzler (mocm@thp.uni-koeln.de) 11 (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de> 12 13 14*/ 15 16#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 17 18#include <linux/delay.h> 19#include <linux/module.h> 20#include <linux/kmod.h> 21#include <linux/init.h> 22#include <linux/pci.h> 23#include <linux/vmalloc.h> 24#include <linux/firmware.h> 25#include <net/checksum.h> 26 27#include <asm/unaligned.h> 28#include <asm/io.h> 29 30#include "bttvp.h" 31#include <media/v4l2-common.h> 32#include <media/i2c/tvaudio.h> 33#include "bttv-audio-hook.h" 34 35/* fwd decl */ 36static void boot_msp34xx(struct bttv *btv, int pin); 37static void hauppauge_eeprom(struct bttv *btv); 38static void avermedia_eeprom(struct bttv *btv); 39static void osprey_eeprom(struct bttv *btv, const u8 ee[256]); 40static void modtec_eeprom(struct bttv *btv); 41static void init_PXC200(struct bttv *btv); 42static void init_RTV24(struct bttv *btv); 43static void init_PCI8604PW(struct bttv *btv); 44 45static void rv605_muxsel(struct bttv *btv, unsigned int input); 46static void eagle_muxsel(struct bttv *btv, unsigned int input); 47static void xguard_muxsel(struct bttv *btv, unsigned int input); 48static void ivc120_muxsel(struct bttv *btv, unsigned int input); 49static void gvc1100_muxsel(struct bttv *btv, unsigned int input); 50 51static void PXC200_muxsel(struct bttv *btv, unsigned int input); 52 53static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input); 54static void picolo_tetra_init(struct bttv *btv); 55 56static void tibetCS16_muxsel(struct bttv *btv, unsigned int input); 57static void tibetCS16_init(struct bttv *btv); 58 59static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input); 60static void kodicom4400r_init(struct bttv *btv); 61 62static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input); 63static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input); 64 65static void geovision_muxsel(struct bttv *btv, unsigned int input); 66 67static void phytec_muxsel(struct bttv *btv, unsigned int input); 68 69static void gv800s_muxsel(struct bttv *btv, unsigned int input); 70static void gv800s_init(struct bttv *btv); 71 72static void td3116_muxsel(struct bttv *btv, unsigned int input); 73 74static int terratec_active_radio_upgrade(struct bttv *btv); 75static int tea575x_init(struct bttv *btv); 76static void identify_by_eeprom(struct bttv *btv, 77 unsigned char eeprom_data[256]); 78static int pvr_boot(struct bttv *btv); 79 80/* config variables */ 81static unsigned int triton1; 82static unsigned int vsfx; 83static unsigned int latency = UNSET; 84 85static unsigned int card[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; 86static unsigned int pll[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; 87static unsigned int tuner[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; 88static unsigned int svhs[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; 89static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; 90static unsigned int audiodev[BTTV_MAX]; 91static unsigned int saa6588[BTTV_MAX]; 92static struct bttv *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL }; 93static unsigned int autoload = UNSET; 94static unsigned int gpiomask = UNSET; 95static unsigned int audioall = UNSET; 96static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET }; 97 98/* insmod options */ 99module_param(triton1, int, 0444); 100module_param(vsfx, int, 0444); 101module_param(latency, int, 0444); 102module_param(gpiomask, int, 0444); 103module_param(audioall, int, 0444); 104module_param(autoload, int, 0444); 105 106module_param_array(card, int, NULL, 0444); 107module_param_array(pll, int, NULL, 0444); 108module_param_array(tuner, int, NULL, 0444); 109module_param_array(svhs, int, NULL, 0444); 110module_param_array(remote, int, NULL, 0444); 111module_param_array(audiodev, int, NULL, 0444); 112module_param_array(audiomux, int, NULL, 0444); 113 114MODULE_PARM_DESC(triton1, "set ETBF pci config bit [enable bug compatibility for triton1 + others]"); 115MODULE_PARM_DESC(vsfx, "set VSFX pci config bit [yet another chipset flaw workaround]"); 116MODULE_PARM_DESC(latency,"pci latency timer"); 117MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list"); 118MODULE_PARM_DESC(pll, "specify installed crystal (0=none, 28=28 MHz, 35=35 MHz, 14=14 MHz)"); 119MODULE_PARM_DESC(tuner,"specify installed tuner type"); 120MODULE_PARM_DESC(autoload, "obsolete option, please do not use anymore"); 121MODULE_PARM_DESC(audiodev, "specify audio device:\n" 122 "\t\t-1 = no audio\n" 123 "\t\t 0 = autodetect (default)\n" 124 "\t\t 1 = msp3400\n" 125 "\t\t 2 = tda7432\n" 126 "\t\t 3 = tvaudio"); 127MODULE_PARM_DESC(saa6588, "if 1, then load the saa6588 RDS module, default (0) is to use the card definition."); 128 129 130/* I2C addresses list */ 131#define I2C_ADDR_TDA7432 0x8a 132#define I2C_ADDR_MSP3400 0x80 133#define I2C_ADDR_MSP3400_ALT 0x88 134 135 136/* ----------------------------------------------------------------------- */ 137/* list of card IDs for bt878+ cards */ 138 139static struct CARD { 140 unsigned id; 141 int cardnr; 142 char *name; 143} cards[] = { 144 { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV" }, 145 { 0x39000070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV-D" }, 146 { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR, "Hauppauge WinTV/PVR" }, 147 { 0xff000070, BTTV_BOARD_OSPREY1x0, "Osprey-100" }, 148 { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" }, 149 { 0xff020070, BTTV_BOARD_OSPREY500, "Osprey-500" }, 150 { 0xff030070, BTTV_BOARD_OSPREY2000, "Osprey-2000" }, 151 { 0xff040070, BTTV_BOARD_OSPREY540, "Osprey-540" }, 152 { 0xff070070, BTTV_BOARD_OSPREY440, "Osprey-440" }, 153 154 { 0x00011002, BTTV_BOARD_ATI_TVWONDER, "ATI TV Wonder" }, 155 { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" }, 156 157 { 0x6606107d, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" }, 158 { 0x6607107d, BTTV_BOARD_WINFASTVC100, "Leadtek WinFast VC 100" }, 159 { 0x6609107d, BTTV_BOARD_WINFAST2000, "Leadtek TV 2000 XP" }, 160 { 0x263610b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" }, 161 { 0x264510b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" }, 162 { 0x402010fc, BTTV_BOARD_GVBCTV3PCI, "I-O Data Co. GV-BCTV3/PCI" }, 163 { 0x405010fc, BTTV_BOARD_GVBCTV4PCI, "I-O Data Co. GV-BCTV4/PCI" }, 164 { 0x407010fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" }, 165 { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" }, 166 167 { 0x001211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" }, 168 /* some cards ship with byteswapped IDs ... */ 169 { 0x1200bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" }, 170 { 0xff00bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" }, 171 /* this seems to happen as well ... */ 172 { 0xff1211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" }, 173 174 { 0x3000121a, BTTV_BOARD_VOODOOTV_200, "3Dfx VoodooTV 200" }, 175 { 0x263710b4, BTTV_BOARD_VOODOOTV_FM, "3Dfx VoodooTV FM" }, 176 { 0x3060121a, BTTV_BOARD_STB2, "3Dfx VoodooTV 100/ STB OEM" }, 177 178 { 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" }, 179 { 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" }, 180 { 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" }, 181 { 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" }, 182 { 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" }, 183 { 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" }, 184 { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" }, 185 186 { 0x00011461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" }, 187 { 0x00021461, BTTV_BOARD_AVERMEDIA98, "AVermedia TVCapture 98" }, 188 { 0x00031461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" }, 189 { 0x00041461, BTTV_BOARD_AVERMEDIA98, "AVerMedia TVCapture 98" }, 190 { 0x03001461, BTTV_BOARD_AVERMEDIA98, "VDOMATE TV TUNER CARD" }, 191 192 { 0x1117153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL B/G)" }, 193 { 0x1118153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL B/G)" }, 194 { 0x1119153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL I)" }, 195 { 0x111a153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL I)" }, 196 197 { 0x1123153b, BTTV_BOARD_TERRATVRADIO, "Terratec TV Radio+" }, 198 { 0x1127153b, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.05)" }, 199 /* clashes with FlyVideo 200 *{ 0x18521852, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.10)" }, */ 201 { 0x1134153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (LR102)" }, 202 { 0x1135153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* LR102 */ 203 { 0x5018153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue" }, /* ?? */ 204 { 0xff3b153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* ?? */ 205 206 { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" }, 207 { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" }, 208 { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" }, 209 { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" }, 210 { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" }, 211 212 { 0x1430aa00, BTTV_BOARD_PV143, "Provideo PV143A" }, 213 { 0x1431aa00, BTTV_BOARD_PV143, "Provideo PV143B" }, 214 { 0x1432aa00, BTTV_BOARD_PV143, "Provideo PV143C" }, 215 { 0x1433aa00, BTTV_BOARD_PV143, "Provideo PV143D" }, 216 { 0x1433aa03, BTTV_BOARD_PV143, "Security Eyes" }, 217 218 { 0x1460aa00, BTTV_BOARD_PV150, "Provideo PV150A-1" }, 219 { 0x1461aa01, BTTV_BOARD_PV150, "Provideo PV150A-2" }, 220 { 0x1462aa02, BTTV_BOARD_PV150, "Provideo PV150A-3" }, 221 { 0x1463aa03, BTTV_BOARD_PV150, "Provideo PV150A-4" }, 222 223 { 0x1464aa04, BTTV_BOARD_PV150, "Provideo PV150B-1" }, 224 { 0x1465aa05, BTTV_BOARD_PV150, "Provideo PV150B-2" }, 225 { 0x1466aa06, BTTV_BOARD_PV150, "Provideo PV150B-3" }, 226 { 0x1467aa07, BTTV_BOARD_PV150, "Provideo PV150B-4" }, 227 228 { 0xa132ff00, BTTV_BOARD_IVC100, "IVC-100" }, 229 { 0xa1550000, BTTV_BOARD_IVC200, "IVC-200" }, 230 { 0xa1550001, BTTV_BOARD_IVC200, "IVC-200" }, 231 { 0xa1550002, BTTV_BOARD_IVC200, "IVC-200" }, 232 { 0xa1550003, BTTV_BOARD_IVC200, "IVC-200" }, 233 { 0xa1550100, BTTV_BOARD_IVC200, "IVC-200G" }, 234 { 0xa1550101, BTTV_BOARD_IVC200, "IVC-200G" }, 235 { 0xa1550102, BTTV_BOARD_IVC200, "IVC-200G" }, 236 { 0xa1550103, BTTV_BOARD_IVC200, "IVC-200G" }, 237 { 0xa1550800, BTTV_BOARD_IVC200, "IVC-200" }, 238 { 0xa1550801, BTTV_BOARD_IVC200, "IVC-200" }, 239 { 0xa1550802, BTTV_BOARD_IVC200, "IVC-200" }, 240 { 0xa1550803, BTTV_BOARD_IVC200, "IVC-200" }, 241 { 0xa182ff00, BTTV_BOARD_IVC120, "IVC-120G" }, 242 { 0xa182ff01, BTTV_BOARD_IVC120, "IVC-120G" }, 243 { 0xa182ff02, BTTV_BOARD_IVC120, "IVC-120G" }, 244 { 0xa182ff03, BTTV_BOARD_IVC120, "IVC-120G" }, 245 { 0xa182ff04, BTTV_BOARD_IVC120, "IVC-120G" }, 246 { 0xa182ff05, BTTV_BOARD_IVC120, "IVC-120G" }, 247 { 0xa182ff06, BTTV_BOARD_IVC120, "IVC-120G" }, 248 { 0xa182ff07, BTTV_BOARD_IVC120, "IVC-120G" }, 249 { 0xa182ff08, BTTV_BOARD_IVC120, "IVC-120G" }, 250 { 0xa182ff09, BTTV_BOARD_IVC120, "IVC-120G" }, 251 { 0xa182ff0a, BTTV_BOARD_IVC120, "IVC-120G" }, 252 { 0xa182ff0b, BTTV_BOARD_IVC120, "IVC-120G" }, 253 { 0xa182ff0c, BTTV_BOARD_IVC120, "IVC-120G" }, 254 { 0xa182ff0d, BTTV_BOARD_IVC120, "IVC-120G" }, 255 { 0xa182ff0e, BTTV_BOARD_IVC120, "IVC-120G" }, 256 { 0xa182ff0f, BTTV_BOARD_IVC120, "IVC-120G" }, 257 { 0xf0500000, BTTV_BOARD_IVCE8784, "IVCE-8784" }, 258 { 0xf0500001, BTTV_BOARD_IVCE8784, "IVCE-8784" }, 259 { 0xf0500002, BTTV_BOARD_IVCE8784, "IVCE-8784" }, 260 { 0xf0500003, BTTV_BOARD_IVCE8784, "IVCE-8784" }, 261 262 { 0x41424344, BTTV_BOARD_GRANDTEC, "GrandTec Multi Capture" }, 263 { 0x01020304, BTTV_BOARD_XGUARD, "Grandtec Grand X-Guard" }, 264 265 { 0x18501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" }, 266 { 0xa0501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" }, 267 { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ, "FlyVideo 98EZ (LR51)/ CyberMail AV" }, 268 { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" }, 269 { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" }, 270 { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98, "Lifeview Flyvideo 98" }, 271 272 { 0x010115cb, BTTV_BOARD_GMV1, "AG GMV1" }, 273 { 0x010114c7, BTTV_BOARD_MODTEC_205, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" }, 274 275 { 0x10b42636, BTTV_BOARD_HAUPPAUGE878, "STB ???" }, 276 { 0x217d6606, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" }, 277 { 0xfff6f6ff, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" }, 278 { 0x03116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 311" }, 279 { 0x06116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 611" }, 280 { 0x00790e11, BTTV_BOARD_WINDVR, "Canopus WinDVR PCI" }, 281 { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX, "Face to Face Tvmax" }, 282 { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" }, 283 { 0x146caa0c, BTTV_BOARD_PV951, "ituner spectra8" }, 284 { 0x200a1295, BTTV_BOARD_PXC200, "ImageNation PXC200A" }, 285 286 { 0x40111554, BTTV_BOARD_PV_BT878P_9B, "Prolink Pixelview PV-BT" }, 287 { 0x17de0a01, BTTV_BOARD_KWORLD, "Mecer TV/FM/Video Tuner" }, 288 289 { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" }, 290 { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" }, 291 { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" }, 292 { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" }, 293 294 { 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" }, 295 296 { 0x53534149, BTTV_BOARD_SSAI_SECURITY, "SSAI Security Video Interface" }, 297 { 0x5353414a, BTTV_BOARD_SSAI_ULTRASOUND, "SSAI Ultrasound Video Interface" }, 298 299 /* likely broken, vendor id doesn't match the other magic views ... 300 * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */ 301 302 /* Duplicate PCI ID, reconfigure for this board during the eeprom read. 303 * { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB, "Hauppauge ImpactVCB" }, */ 304 305 { 0x109e036e, BTTV_BOARD_CONCEPTRONIC_CTVFMI2, "Conceptronic CTVFMi v2"}, 306 307 /* DVB cards (using pci function .1 for mpeg data xfer) */ 308 { 0x001c11bd, BTTV_BOARD_PINNACLESAT, "Pinnacle PCTV Sat" }, 309 { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" }, 310 { 0x20007063, BTTV_BOARD_PC_HDTV, "pcHDTV HD-2000 TV"}, 311 { 0x002611bd, BTTV_BOARD_TWINHAN_DST, "Pinnacle PCTV SAT CI" }, 312 { 0x00011822, BTTV_BOARD_TWINHAN_DST, "Twinhan VisionPlus DVB" }, 313 { 0xfc00270f, BTTV_BOARD_TWINHAN_DST, "ChainTech digitop DST-1000 DVB-S" }, 314 { 0x07711461, BTTV_BOARD_AVDVBT_771, "AVermedia AverTV DVB-T 771" }, 315 { 0x07611461, BTTV_BOARD_AVDVBT_761, "AverMedia AverTV DVB-T 761" }, 316 { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE, "DViCO FusionHDTV DVB-T Lite" }, 317 { 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE, "Ultraview DVB-T Lite" }, 318 { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE, "DViCO FusionHDTV 5 Lite" }, 319 { 0x00261822, BTTV_BOARD_TWINHAN_DST, "DNTV Live! Mini "}, 320 { 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2, "DViCO FusionHDTV 2" }, 321 { 0x763c008a, BTTV_BOARD_GEOVISION_GV600, "GeoVision GV-600" }, 322 { 0x18011000, BTTV_BOARD_ENLTV_FM_2, "Encore ENL TV-FM-2" }, 323 { 0x763d800a, BTTV_BOARD_GEOVISION_GV800S, "GeoVision GV-800(S) (master)" }, 324 { 0x763d800b, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" }, 325 { 0x763d800c, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" }, 326 { 0x763d800d, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" }, 327 328 { 0x15401830, BTTV_BOARD_PV183, "Provideo PV183-1" }, 329 { 0x15401831, BTTV_BOARD_PV183, "Provideo PV183-2" }, 330 { 0x15401832, BTTV_BOARD_PV183, "Provideo PV183-3" }, 331 { 0x15401833, BTTV_BOARD_PV183, "Provideo PV183-4" }, 332 { 0x15401834, BTTV_BOARD_PV183, "Provideo PV183-5" }, 333 { 0x15401835, BTTV_BOARD_PV183, "Provideo PV183-6" }, 334 { 0x15401836, BTTV_BOARD_PV183, "Provideo PV183-7" }, 335 { 0x15401837, BTTV_BOARD_PV183, "Provideo PV183-8" }, 336 { 0x3116f200, BTTV_BOARD_TVT_TD3116, "Tongwei Video Technology TD-3116" }, 337 { 0x02280279, BTTV_BOARD_APOSONIC_WDVR, "Aposonic W-DVR" }, 338 { 0, -1, NULL } 339}; 340 341/* ----------------------------------------------------------------------- */ 342/* array with description for bt848 / bt878 tv/grabber cards */ 343 344struct tvcard bttv_tvcards[] = { 345 /* ---- card 0x00 ---------------------------------- */ 346 [BTTV_BOARD_UNKNOWN] = { 347 .name = " *** UNKNOWN/GENERIC *** ", 348 .video_inputs = 4, 349 .svhs = 2, 350 .muxsel = MUXSEL(2, 3, 1, 0), 351 .tuner_type = UNSET, 352 .tuner_addr = ADDR_UNSET, 353 }, 354 [BTTV_BOARD_MIRO] = { 355 .name = "MIRO PCTV", 356 .video_inputs = 4, 357 /* .audio_inputs= 1, */ 358 .svhs = 2, 359 .gpiomask = 15, 360 .muxsel = MUXSEL(2, 3, 1, 1), 361 .gpiomux = { 2, 0, 0, 0 }, 362 .gpiomute = 10, 363 .tuner_type = UNSET, 364 .tuner_addr = ADDR_UNSET, 365 }, 366 [BTTV_BOARD_HAUPPAUGE] = { 367 .name = "Hauppauge (bt848)", 368 .video_inputs = 4, 369 /* .audio_inputs= 1, */ 370 .svhs = 2, 371 .gpiomask = 7, 372 .muxsel = MUXSEL(2, 3, 1, 1), 373 .gpiomux = { 0, 1, 2, 3 }, 374 .gpiomute = 4, 375 .tuner_type = UNSET, 376 .tuner_addr = ADDR_UNSET, 377 }, 378 [BTTV_BOARD_STB] = { 379 .name = "STB, Gateway P/N 6000699 (bt848)", 380 .video_inputs = 3, 381 /* .audio_inputs= 1, */ 382 .svhs = 2, 383 .gpiomask = 7, 384 .muxsel = MUXSEL(2, 3, 1, 1), 385 .gpiomux = { 4, 0, 2, 3 }, 386 .gpiomute = 1, 387 .no_msp34xx = 1, 388 .tuner_type = TUNER_PHILIPS_NTSC, 389 .tuner_addr = ADDR_UNSET, 390 .pll = PLL_28, 391 .has_radio = 1, 392 }, 393 394 /* ---- card 0x04 ---------------------------------- */ 395 [BTTV_BOARD_INTEL] = { 396 .name = "Intel Create and Share PCI/ Smart Video Recorder III", 397 .video_inputs = 4, 398 /* .audio_inputs= 0, */ 399 .svhs = 2, 400 .gpiomask = 0, 401 .muxsel = MUXSEL(2, 3, 1, 1), 402 .gpiomux = { 0 }, 403 .tuner_type = TUNER_ABSENT, 404 .tuner_addr = ADDR_UNSET, 405 }, 406 [BTTV_BOARD_DIAMOND] = { 407 .name = "Diamond DTV2000", 408 .video_inputs = 4, 409 /* .audio_inputs= 1, */ 410 .svhs = 2, 411 .gpiomask = 3, 412 .muxsel = MUXSEL(2, 3, 1, 0), 413 .gpiomux = { 0, 1, 0, 1 }, 414 .gpiomute = 3, 415 .tuner_type = UNSET, 416 .tuner_addr = ADDR_UNSET, 417 }, 418 [BTTV_BOARD_AVERMEDIA] = { 419 .name = "AVerMedia TVPhone", 420 .video_inputs = 3, 421 /* .audio_inputs= 1, */ 422 .svhs = 3, 423 .muxsel = MUXSEL(2, 3, 1, 1), 424 .gpiomask = 0x0f, 425 .gpiomux = { 0x0c, 0x04, 0x08, 0x04 }, 426 /* 0x04 for some cards ?? */ 427 .tuner_type = UNSET, 428 .tuner_addr = ADDR_UNSET, 429 .audio_mode_gpio= avermedia_tvphone_audio, 430 .has_remote = 1, 431 }, 432 [BTTV_BOARD_MATRIX_VISION] = { 433 .name = "MATRIX-Vision MV-Delta", 434 .video_inputs = 5, 435 /* .audio_inputs= 1, */ 436 .svhs = 3, 437 .gpiomask = 0, 438 .muxsel = MUXSEL(2, 3, 1, 0, 0), 439 .gpiomux = { 0 }, 440 .tuner_type = TUNER_ABSENT, 441 .tuner_addr = ADDR_UNSET, 442 }, 443 444 /* ---- card 0x08 ---------------------------------- */ 445 [BTTV_BOARD_FLYVIDEO] = { 446 .name = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26", 447 .video_inputs = 4, 448 /* .audio_inputs= 1, */ 449 .svhs = 2, 450 .gpiomask = 0xc00, 451 .muxsel = MUXSEL(2, 3, 1, 1), 452 .gpiomux = { 0, 0xc00, 0x800, 0x400 }, 453 .gpiomute = 0xc00, 454 .pll = PLL_28, 455 .tuner_type = UNSET, 456 .tuner_addr = ADDR_UNSET, 457 }, 458 [BTTV_BOARD_TURBOTV] = { 459 .name = "IMS/IXmicro TurboTV", 460 .video_inputs = 3, 461 /* .audio_inputs= 1, */ 462 .svhs = 2, 463 .gpiomask = 3, 464 .muxsel = MUXSEL(2, 3, 1, 1), 465 .gpiomux = { 1, 1, 2, 3 }, 466 .pll = PLL_28, 467 .tuner_type = TUNER_TEMIC_PAL, 468 .tuner_addr = ADDR_UNSET, 469 }, 470 [BTTV_BOARD_HAUPPAUGE878] = { 471 .name = "Hauppauge (bt878)", 472 .video_inputs = 4, 473 /* .audio_inputs= 1, */ 474 .svhs = 2, 475 .gpiomask = 0x0f, /* old: 7 */ 476 .muxsel = MUXSEL(2, 0, 1, 1), 477 .gpiomux = { 0, 1, 2, 3 }, 478 .gpiomute = 4, 479 .pll = PLL_28, 480 .tuner_type = UNSET, 481 .tuner_addr = ADDR_UNSET, 482 }, 483 [BTTV_BOARD_MIROPRO] = { 484 .name = "MIRO PCTV pro", 485 .video_inputs = 3, 486 /* .audio_inputs= 1, */ 487 .svhs = 2, 488 .gpiomask = 0x3014f, 489 .muxsel = MUXSEL(2, 3, 1, 1), 490 .gpiomux = { 0x20001,0x10001, 0, 0 }, 491 .gpiomute = 10, 492 .tuner_type = UNSET, 493 .tuner_addr = ADDR_UNSET, 494 }, 495 496 /* ---- card 0x0c ---------------------------------- */ 497 [BTTV_BOARD_ADSTECH_TV] = { 498 .name = "ADS Technologies Channel Surfer TV (bt848)", 499 .video_inputs = 3, 500 /* .audio_inputs= 1, */ 501 .svhs = 2, 502 .gpiomask = 15, 503 .muxsel = MUXSEL(2, 3, 1, 1), 504 .gpiomux = { 13, 14, 11, 7 }, 505 .tuner_type = UNSET, 506 .tuner_addr = ADDR_UNSET, 507 }, 508 [BTTV_BOARD_AVERMEDIA98] = { 509 .name = "AVerMedia TVCapture 98", 510 .video_inputs = 3, 511 /* .audio_inputs= 4, */ 512 .svhs = 2, 513 .gpiomask = 15, 514 .muxsel = MUXSEL(2, 3, 1, 1), 515 .gpiomux = { 13, 14, 11, 7 }, 516 .msp34xx_alt = 1, 517 .pll = PLL_28, 518 .tuner_type = TUNER_PHILIPS_PAL, 519 .tuner_addr = ADDR_UNSET, 520 .audio_mode_gpio= avermedia_tv_stereo_audio, 521 .no_gpioirq = 1, 522 }, 523 [BTTV_BOARD_VHX] = { 524 .name = "Aimslab Video Highway Xtreme (VHX)", 525 .video_inputs = 3, 526 /* .audio_inputs= 1, */ 527 .svhs = 2, 528 .gpiomask = 7, 529 .muxsel = MUXSEL(2, 3, 1, 1), 530 .gpiomux = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */ 531 .gpiomute = 4, 532 .pll = PLL_28, 533 .tuner_type = UNSET, 534 .tuner_addr = ADDR_UNSET, 535 }, 536 [BTTV_BOARD_ZOLTRIX] = { 537 .name = "Zoltrix TV-Max", 538 .video_inputs = 3, 539 /* .audio_inputs= 1, */ 540 .svhs = 2, 541 .gpiomask = 15, 542 .muxsel = MUXSEL(2, 3, 1, 1), 543 .gpiomux = { 0, 0, 1, 0 }, 544 .gpiomute = 10, 545 .tuner_type = UNSET, 546 .tuner_addr = ADDR_UNSET, 547 }, 548 549 /* ---- card 0x10 ---------------------------------- */ 550 [BTTV_BOARD_PIXVIEWPLAYTV] = { 551 .name = "Prolink Pixelview PlayTV (bt878)", 552 .video_inputs = 3, 553 /* .audio_inputs= 1, */ 554 .svhs = 2, 555 .gpiomask = 0x01fe00, 556 .muxsel = MUXSEL(2, 3, 1, 1), 557 /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */ 558 .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 }, 559 .gpiomute = 0x002000, 560 .pll = PLL_28, 561 .tuner_type = UNSET, 562 .tuner_addr = ADDR_UNSET, 563 }, 564 [BTTV_BOARD_WINVIEW_601] = { 565 .name = "Leadtek WinView 601", 566 .video_inputs = 3, 567 /* .audio_inputs= 1, */ 568 .svhs = 2, 569 .gpiomask = 0x8300f8, 570 .muxsel = MUXSEL(2, 3, 1, 1, 0), 571 .gpiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 }, 572 .gpiomute = 0xcfa007, 573 .tuner_type = UNSET, 574 .tuner_addr = ADDR_UNSET, 575 .volume_gpio = winview_volume, 576 .has_radio = 1, 577 }, 578 [BTTV_BOARD_AVEC_INTERCAP] = { 579 .name = "AVEC Intercapture", 580 .video_inputs = 3, 581 /* .audio_inputs= 2, */ 582 .svhs = 2, 583 .gpiomask = 0, 584 .muxsel = MUXSEL(2, 3, 1, 1), 585 .gpiomux = { 1, 0, 0, 0 }, 586 .tuner_type = UNSET, 587 .tuner_addr = ADDR_UNSET, 588 }, 589 [BTTV_BOARD_LIFE_FLYKIT] = { 590 .name = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)", 591 .video_inputs = 4, 592 /* .audio_inputs= 1, */ 593 .svhs = NO_SVHS, 594 .gpiomask = 0x8dff00, 595 .muxsel = MUXSEL(2, 3, 1, 1), 596 .gpiomux = { 0 }, 597 .no_msp34xx = 1, 598 .tuner_type = TUNER_ABSENT, 599 .tuner_addr = ADDR_UNSET, 600 }, 601 602 /* ---- card 0x14 ---------------------------------- */ 603 [BTTV_BOARD_CEI_RAFFLES] = { 604 .name = "CEI Raffles Card", 605 .video_inputs = 3, 606 /* .audio_inputs= 3, */ 607 .svhs = 2, 608 .muxsel = MUXSEL(2, 3, 1, 1), 609 .tuner_type = UNSET, 610 .tuner_addr = ADDR_UNSET, 611 }, 612 [BTTV_BOARD_CONFERENCETV] = { 613 .name = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50", 614 .video_inputs = 4, 615 /* .audio_inputs= 2, tuner, line in */ 616 .svhs = 2, 617 .gpiomask = 0x1800, 618 .muxsel = MUXSEL(2, 3, 1, 1), 619 .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, 620 .gpiomute = 0x1800, 621 .pll = PLL_28, 622 .tuner_type = TUNER_PHILIPS_PAL_I, 623 .tuner_addr = ADDR_UNSET, 624 }, 625 [BTTV_BOARD_PHOEBE_TVMAS] = { 626 .name = "Askey CPH050/ Phoebe Tv Master + FM", 627 .video_inputs = 3, 628 /* .audio_inputs= 1, */ 629 .svhs = 2, 630 .gpiomask = 0xc00, 631 .muxsel = MUXSEL(2, 3, 1, 1), 632 .gpiomux = { 0, 1, 0x800, 0x400 }, 633 .gpiomute = 0xc00, 634 .pll = PLL_28, 635 .tuner_type = UNSET, 636 .tuner_addr = ADDR_UNSET, 637 }, 638 [BTTV_BOARD_MODTEC_205] = { 639 .name = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878", 640 .video_inputs = 3, 641 /* .audio_inputs= 1, */ 642 .svhs = NO_SVHS, 643 .has_dig_in = 1, 644 .gpiomask = 7, 645 .muxsel = MUXSEL(2, 3, 0), /* input 2 is digital */ 646 /* .digital_mode= DIGITAL_MODE_CAMERA, */ 647 .gpiomux = { 0, 0, 0, 0 }, 648 .no_msp34xx = 1, 649 .pll = PLL_28, 650 .tuner_type = TUNER_ALPS_TSBB5_PAL_I, 651 .tuner_addr = ADDR_UNSET, 652 }, 653 654 /* ---- card 0x18 ---------------------------------- */ 655 [BTTV_BOARD_MAGICTVIEW061] = { 656 .name = "Askey CPH05X/06X (bt878) [many vendors]", 657 .video_inputs = 3, 658 /* .audio_inputs= 1, */ 659 .svhs = 2, 660 .gpiomask = 0xe00, 661 .muxsel = MUXSEL(2, 3, 1, 1), 662 .gpiomux = {0x400, 0x400, 0x400, 0x400 }, 663 .gpiomute = 0xc00, 664 .pll = PLL_28, 665 .tuner_type = UNSET, 666 .tuner_addr = ADDR_UNSET, 667 .has_remote = 1, 668 .has_radio = 1, /* not every card has radio */ 669 }, 670 [BTTV_BOARD_VOBIS_BOOSTAR] = { 671 .name = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar", 672 .video_inputs = 3, 673 /* .audio_inputs= 1, */ 674 .svhs = 2, 675 .gpiomask = 0x1f0fff, 676 .muxsel = MUXSEL(2, 3, 1, 1), 677 .gpiomux = { 0x20000, 0x30000, 0x10000, 0 }, 678 .gpiomute = 0x40000, 679 .tuner_type = TUNER_PHILIPS_PAL, 680 .tuner_addr = ADDR_UNSET, 681 .audio_mode_gpio= terratv_audio, 682 }, 683 [BTTV_BOARD_HAUPPAUG_WCAM] = { 684 .name = "Hauppauge WinCam newer (bt878)", 685 .video_inputs = 4, 686 /* .audio_inputs= 1, */ 687 .svhs = 3, 688 .gpiomask = 7, 689 .muxsel = MUXSEL(2, 0, 1, 1), 690 .gpiomux = { 0, 1, 2, 3 }, 691 .gpiomute = 4, 692 .tuner_type = UNSET, 693 .tuner_addr = ADDR_UNSET, 694 }, 695 [BTTV_BOARD_MAXI] = { 696 .name = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50", 697 .video_inputs = 4, 698 /* .audio_inputs= 2, */ 699 .svhs = 2, 700 .gpiomask = 0x1800, 701 .muxsel = MUXSEL(2, 3, 1, 1), 702 .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, 703 .gpiomute = 0x1800, 704 .pll = PLL_28, 705 .tuner_type = TUNER_PHILIPS_SECAM, 706 .tuner_addr = ADDR_UNSET, 707 }, 708 709 /* ---- card 0x1c ---------------------------------- */ 710 [BTTV_BOARD_TERRATV] = { 711 .name = "Terratec TerraTV+ Version 1.1 (bt878)", 712 .video_inputs = 3, 713 /* .audio_inputs= 1, */ 714 .svhs = 2, 715 .gpiomask = 0x1f0fff, 716 .muxsel = MUXSEL(2, 3, 1, 1), 717 .gpiomux = { 0x20000, 0x30000, 0x10000, 0x00000 }, 718 .gpiomute = 0x40000, 719 .tuner_type = TUNER_PHILIPS_PAL, 720 .tuner_addr = ADDR_UNSET, 721 .audio_mode_gpio= terratv_audio, 722 /* GPIO wiring: 723 External 20 pin connector (for Active Radio Upgrade board) 724 gpio00: i2c-sda 725 gpio01: i2c-scl 726 gpio02: om5610-data 727 gpio03: om5610-clk 728 gpio04: om5610-wre 729 gpio05: om5610-stereo 730 gpio06: rds6588-davn 731 gpio07: Pin 7 n.c. 732 gpio08: nIOW 733 gpio09+10: nIOR, nSEL ?? (bt878) 734 gpio09: nIOR (bt848) 735 gpio10: nSEL (bt848) 736 Sound Routing: 737 gpio16: u2-A0 (1st 4052bt) 738 gpio17: u2-A1 739 gpio18: u2-nEN 740 gpio19: u4-A0 (2nd 4052) 741 gpio20: u4-A1 742 u4-nEN - GND 743 Btspy: 744 00000 : Cdrom (internal audio input) 745 10000 : ext. Video audio input 746 20000 : TV Mono 747 a0000 : TV Mono/2 748 1a0000 : TV Stereo 749 30000 : Radio 750 40000 : Mute 751 */ 752 753 }, 754 [BTTV_BOARD_PXC200] = { 755 /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */ 756 .name = "Imagenation PXC200", 757 .video_inputs = 5, 758 /* .audio_inputs= 1, */ 759 .svhs = 1, /* was: 4 */ 760 .gpiomask = 0, 761 .muxsel = MUXSEL(2, 3, 1, 0, 0), 762 .gpiomux = { 0 }, 763 .tuner_type = TUNER_ABSENT, 764 .tuner_addr = ADDR_UNSET, 765 .muxsel_hook = PXC200_muxsel, 766 767 }, 768 [BTTV_BOARD_FLYVIDEO_98] = { 769 .name = "Lifeview FlyVideo 98 LR50", 770 .video_inputs = 4, 771 /* .audio_inputs= 1, */ 772 .svhs = 2, 773 .gpiomask = 0x1800, /* 0x8dfe00 */ 774 .muxsel = MUXSEL(2, 3, 1, 1), 775 .gpiomux = { 0, 0x0800, 0x1000, 0x1000 }, 776 .gpiomute = 0x1800, 777 .pll = PLL_28, 778 .tuner_type = UNSET, 779 .tuner_addr = ADDR_UNSET, 780 }, 781 [BTTV_BOARD_IPROTV] = { 782 .name = "Formac iProTV, Formac ProTV I (bt848)", 783 .video_inputs = 4, 784 /* .audio_inputs= 1, */ 785 .svhs = 3, 786 .gpiomask = 1, 787 .muxsel = MUXSEL(2, 3, 1, 1), 788 .gpiomux = { 1, 0, 0, 0 }, 789 .pll = PLL_28, 790 .tuner_type = TUNER_PHILIPS_PAL, 791 .tuner_addr = ADDR_UNSET, 792 }, 793 794 /* ---- card 0x20 ---------------------------------- */ 795 [BTTV_BOARD_INTEL_C_S_PCI] = { 796 .name = "Intel Create and Share PCI/ Smart Video Recorder III", 797 .video_inputs = 4, 798 /* .audio_inputs= 0, */ 799 .svhs = 2, 800 .gpiomask = 0, 801 .muxsel = MUXSEL(2, 3, 1, 1), 802 .gpiomux = { 0 }, 803 .tuner_type = TUNER_ABSENT, 804 .tuner_addr = ADDR_UNSET, 805 }, 806 [BTTV_BOARD_TERRATVALUE] = { 807 .name = "Terratec TerraTValue Version Bt878", 808 .video_inputs = 3, 809 /* .audio_inputs= 1, */ 810 .svhs = 2, 811 .gpiomask = 0xffff00, 812 .muxsel = MUXSEL(2, 3, 1, 1), 813 .gpiomux = { 0x500, 0, 0x300, 0x900 }, 814 .gpiomute = 0x900, 815 .pll = PLL_28, 816 .tuner_type = TUNER_PHILIPS_PAL, 817 .tuner_addr = ADDR_UNSET, 818 }, 819 [BTTV_BOARD_WINFAST2000] = { 820 .name = "Leadtek WinFast 2000/ WinFast 2000 XP", 821 .video_inputs = 4, 822 /* .audio_inputs= 1, */ 823 .svhs = 2, 824 /* TV, CVid, SVid, CVid over SVid connector */ 825 .muxsel = MUXSEL(2, 3, 1, 1, 0), 826 /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */ 827 .gpiomask = 0xb33000, 828 .gpiomux = { 0x122000,0x1000,0x0000,0x620000 }, 829 .gpiomute = 0x800000, 830 /* Audio Routing for "WinFast 2000 XP" (no tv stereo !) 831 gpio23 -- hef4052:nEnable (0x800000) 832 gpio12 -- hef4052:A1 833 gpio13 -- hef4052:A0 834 0x0000: external audio 835 0x1000: FM 836 0x2000: TV 837 0x3000: n.c. 838 Note: There exists another variant "Winfast 2000" with tv stereo !? 839 Note: eeprom only contains FF and pci subsystem id 107d:6606 840 */ 841 .pll = PLL_28, 842 .has_radio = 1, 843 .tuner_type = TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */ 844 .tuner_addr = ADDR_UNSET, 845 .audio_mode_gpio= winfast2000_audio, 846 .has_remote = 1, 847 }, 848 [BTTV_BOARD_CHRONOS_VS2] = { 849 .name = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II", 850 .video_inputs = 4, 851 /* .audio_inputs= 3, */ 852 .svhs = 2, 853 .gpiomask = 0x1800, 854 .muxsel = MUXSEL(2, 3, 1, 1), 855 .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, 856 .gpiomute = 0x1800, 857 .pll = PLL_28, 858 .tuner_type = UNSET, 859 .tuner_addr = ADDR_UNSET, 860 }, 861 862 /* ---- card 0x24 ---------------------------------- */ 863 [BTTV_BOARD_TYPHOON_TVIEW] = { 864 .name = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner", 865 .video_inputs = 4, 866 /* .audio_inputs= 3, */ 867 .svhs = 2, 868 .gpiomask = 0x1800, 869 .muxsel = MUXSEL(2, 3, 1, 1), 870 .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, 871 .gpiomute = 0x1800, 872 .pll = PLL_28, 873 .tuner_type = UNSET, 874 .tuner_addr = ADDR_UNSET, 875 .has_radio = 1, 876 }, 877 [BTTV_BOARD_PXELVWPLTVPRO] = { 878 .name = "Prolink PixelView PlayTV pro", 879 .video_inputs = 3, 880 /* .audio_inputs= 1, */ 881 .svhs = 2, 882 .gpiomask = 0xff, 883 .muxsel = MUXSEL(2, 3, 1, 1), 884 .gpiomux = { 0x21, 0x20, 0x24, 0x2c }, 885 .gpiomute = 0x29, 886 .no_msp34xx = 1, 887 .pll = PLL_28, 888 .tuner_type = UNSET, 889 .tuner_addr = ADDR_UNSET, 890 }, 891 [BTTV_BOARD_MAGICTVIEW063] = { 892 .name = "Askey CPH06X TView99", 893 .video_inputs = 4, 894 /* .audio_inputs= 1, */ 895 .svhs = 2, 896 .gpiomask = 0x551e00, 897 .muxsel = MUXSEL(2, 3, 1, 0), 898 .gpiomux = { 0x551400, 0x551200, 0, 0 }, 899 .gpiomute = 0x551c00, 900 .pll = PLL_28, 901 .tuner_type = TUNER_PHILIPS_PAL_I, 902 .tuner_addr = ADDR_UNSET, 903 .has_remote = 1, 904 }, 905 [BTTV_BOARD_PINNACLE] = { 906 .name = "Pinnacle PCTV Studio/Rave", 907 .video_inputs = 3, 908 /* .audio_inputs= 1, */ 909 .svhs = 2, 910 .gpiomask = 0x03000F, 911 .muxsel = MUXSEL(2, 3, 1, 1), 912 .gpiomux = { 2, 0xd0001, 0, 0 }, 913 .gpiomute = 1, 914 .pll = PLL_28, 915 .tuner_type = UNSET, 916 .tuner_addr = ADDR_UNSET, 917 }, 918 919 /* ---- card 0x28 ---------------------------------- */ 920 [BTTV_BOARD_STB2] = { 921 .name = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100", 922 .video_inputs = 3, 923 /* .audio_inputs= 1, */ 924 .svhs = 2, 925 .gpiomask = 7, 926 .muxsel = MUXSEL(2, 3, 1, 1), 927 .gpiomux = { 4, 0, 2, 3 }, 928 .gpiomute = 1, 929 .no_msp34xx = 1, 930 .tuner_type = TUNER_PHILIPS_NTSC, 931 .tuner_addr = ADDR_UNSET, 932 .pll = PLL_28, 933 .has_radio = 1, 934 }, 935 [BTTV_BOARD_AVPHONE98] = { 936 .name = "AVerMedia TVPhone 98", 937 .video_inputs = 3, 938 /* .audio_inputs= 4, */ 939 .svhs = 2, 940 .gpiomask = 15, 941 .muxsel = MUXSEL(2, 3, 1, 1), 942 .gpiomux = { 13, 4, 11, 7 }, 943 .pll = PLL_28, 944 .tuner_type = UNSET, 945 .tuner_addr = ADDR_UNSET, 946 .has_radio = 1, 947 .audio_mode_gpio= avermedia_tvphone_audio, 948 }, 949 [BTTV_BOARD_PV951] = { 950 .name = "ProVideo PV951", /* pic16c54 */ 951 .video_inputs = 3, 952 /* .audio_inputs= 1, */ 953 .svhs = 2, 954 .gpiomask = 0, 955 .muxsel = MUXSEL(2, 3, 1, 1), 956 .gpiomux = { 0, 0, 0, 0}, 957 .no_msp34xx = 1, 958 .pll = PLL_28, 959 .tuner_type = TUNER_PHILIPS_PAL_I, 960 .tuner_addr = ADDR_UNSET, 961 }, 962 [BTTV_BOARD_ONAIR_TV] = { 963 .name = "Little OnAir TV", 964 .video_inputs = 3, 965 /* .audio_inputs= 1, */ 966 .svhs = 2, 967 .gpiomask = 0xe00b, 968 .muxsel = MUXSEL(2, 3, 1, 1), 969 .gpiomux = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 }, 970 .gpiomute = 0xff3ffc, 971 .no_msp34xx = 1, 972 .tuner_type = UNSET, 973 .tuner_addr = ADDR_UNSET, 974 }, 975 976 /* ---- card 0x2c ---------------------------------- */ 977 [BTTV_BOARD_SIGMA_TVII_FM] = { 978 .name = "Sigma TVII-FM", 979 .video_inputs = 2, 980 /* .audio_inputs= 1, */ 981 .svhs = NO_SVHS, 982 .gpiomask = 3, 983 .muxsel = MUXSEL(2, 3, 1, 1), 984 .gpiomux = { 1, 1, 0, 2 }, 985 .gpiomute = 3, 986 .no_msp34xx = 1, 987 .pll = PLL_NONE, 988 .tuner_type = UNSET, 989 .tuner_addr = ADDR_UNSET, 990 }, 991 [BTTV_BOARD_MATRIX_VISION2] = { 992 .name = "MATRIX-Vision MV-Delta 2", 993 .video_inputs = 5, 994 /* .audio_inputs= 1, */ 995 .svhs = 3, 996 .gpiomask = 0, 997 .muxsel = MUXSEL(2, 3, 1, 0, 0), 998 .gpiomux = { 0 }, 999 .no_msp34xx = 1, 1000 .pll = PLL_28, 1001 .tuner_type = TUNER_ABSENT, 1002 .tuner_addr = ADDR_UNSET, 1003 }, 1004 [BTTV_BOARD_ZOLTRIX_GENIE] = { 1005 .name = "Zoltrix Genie TV/FM", 1006 .video_inputs = 3, 1007 /* .audio_inputs= 1, */ 1008 .svhs = 2, 1009 .gpiomask = 0xbcf03f, 1010 .muxsel = MUXSEL(2, 3, 1, 1), 1011 .gpiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 }, 1012 .gpiomute = 0xbcb03f, 1013 .no_msp34xx = 1, 1014 .pll = PLL_28, 1015 .tuner_type = TUNER_TEMIC_4039FR5_NTSC, 1016 .tuner_addr = ADDR_UNSET, 1017 }, 1018 [BTTV_BOARD_TERRATVRADIO] = { 1019 .name = "Terratec TV/Radio+", 1020 .video_inputs = 3, 1021 /* .audio_inputs= 1, */ 1022 .svhs = 2, 1023 .gpiomask = 0x70000, 1024 .muxsel = MUXSEL(2, 3, 1, 1), 1025 .gpiomux = { 0x20000, 0x30000, 0x10000, 0 }, 1026 .gpiomute = 0x40000, 1027 .no_msp34xx = 1, 1028 .pll = PLL_35, 1029 .tuner_type = TUNER_PHILIPS_PAL_I, 1030 .tuner_addr = ADDR_UNSET, 1031 .has_radio = 1, 1032 }, 1033 1034 /* ---- card 0x30 ---------------------------------- */ 1035 [BTTV_BOARD_DYNALINK] = { 1036 .name = "Askey CPH03x/ Dynalink Magic TView", 1037 .video_inputs = 3, 1038 /* .audio_inputs= 1, */ 1039 .svhs = 2, 1040 .gpiomask = 15, 1041 .muxsel = MUXSEL(2, 3, 1, 1), 1042 .gpiomux = {2,0,0,0 }, 1043 .gpiomute = 1, 1044 .pll = PLL_28, 1045 .tuner_type = UNSET, 1046 .tuner_addr = ADDR_UNSET, 1047 }, 1048 [BTTV_BOARD_GVBCTV3PCI] = { 1049 .name = "IODATA GV-BCTV3/PCI", 1050 .video_inputs = 3, 1051 /* .audio_inputs= 1, */ 1052 .svhs = 2, 1053 .gpiomask = 0x010f00, 1054 .muxsel = MUXSEL(2, 3, 0, 0), 1055 .gpiomux = {0x10000, 0, 0x10000, 0 }, 1056 .no_msp34xx = 1, 1057 .pll = PLL_28, 1058 .tuner_type = TUNER_ALPS_TSHC6_NTSC, 1059 .tuner_addr = ADDR_UNSET, 1060 .audio_mode_gpio= gvbctv3pci_audio, 1061 }, 1062 [BTTV_BOARD_PXELVWPLTVPAK] = { 1063 .name = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP", 1064 .video_inputs = 5, 1065 /* .audio_inputs= 1, */ 1066 .svhs = 3, 1067 .has_dig_in = 1, 1068 .gpiomask = 0xAA0000, 1069 .muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */ 1070 /* .digital_mode= DIGITAL_MODE_CAMERA, */ 1071 .gpiomux = { 0x20000, 0, 0x80000, 0x80000 }, 1072 .gpiomute = 0xa8000, 1073 .no_msp34xx = 1, 1074 .pll = PLL_28, 1075 .tuner_type = TUNER_PHILIPS_PAL_I, 1076 .tuner_addr = ADDR_UNSET, 1077 .has_remote = 1, 1078 /* GPIO wiring: (different from Rev.4C !) 1079 GPIO17: U4.A0 (first hef4052bt) 1080 GPIO19: U4.A1 1081 GPIO20: U5.A1 (second hef4052bt) 1082 GPIO21: U4.nEN 1083 GPIO22: BT832 Reset Line 1084 GPIO23: A5,A0, U5,nEN 1085 Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22 1086 */ 1087 }, 1088 [BTTV_BOARD_EAGLE] = { 1089 .name = "Eagle Wireless Capricorn2 (bt878A)", 1090 .video_inputs = 4, 1091 /* .audio_inputs= 1, */ 1092 .svhs = 2, 1093 .gpiomask = 7, 1094 .muxsel = MUXSEL(2, 0, 1, 1), 1095 .gpiomux = { 0, 1, 2, 3 }, 1096 .gpiomute = 4, 1097 .pll = PLL_28, 1098 .tuner_type = UNSET /* TUNER_ALPS_TMDH2_NTSC */, 1099 .tuner_addr = ADDR_UNSET, 1100 }, 1101 1102 /* ---- card 0x34 ---------------------------------- */ 1103 [BTTV_BOARD_PINNACLEPRO] = { 1104 /* David Härdeman <david@2gen.com> */ 1105 .name = "Pinnacle PCTV Studio Pro", 1106 .video_inputs = 4, 1107 /* .audio_inputs= 1, */ 1108 .svhs = 3, 1109 .gpiomask = 0x03000F, 1110 .muxsel = MUXSEL(2, 3, 1, 1), 1111 .gpiomux = { 1, 0xd0001, 0, 0 }, 1112 .gpiomute = 10, 1113 /* sound path (5 sources): 1114 MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable) 1115 0= ext. Audio IN 1116 1= from MUX2 1117 2= Mono TV sound from Tuner 1118 3= not connected 1119 MUX2 (mask 0x30000): 1120 0,2,3= from MSP34xx 1121 1= FM stereo Radio from Tuner */ 1122 .pll = PLL_28, 1123 .tuner_type = UNSET, 1124 .tuner_addr = ADDR_UNSET, 1125 }, 1126 [BTTV_BOARD_TVIEW_RDS_FM] = { 1127 /* Claas Langbehn <claas@bigfoot.com>, 1128 Sven Grothklags <sven@upb.de> */ 1129 .name = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS", 1130 .video_inputs = 4, 1131 /* .audio_inputs= 3, */ 1132 .svhs = 2, 1133 .gpiomask = 0x1c, 1134 .muxsel = MUXSEL(2, 3, 1, 1), 1135 .gpiomux = { 0, 0, 0x10, 8 }, 1136 .gpiomute = 4, 1137 .pll = PLL_28, 1138 .tuner_type = TUNER_PHILIPS_PAL, 1139 .tuner_addr = ADDR_UNSET, 1140 .has_radio = 1, 1141 }, 1142 [BTTV_BOARD_LIFETEC_9415] = { 1143 /* Tim Röstermundt <rosterm@uni-muenster.de> 1144 in de.comp.os.unix.linux.hardware: 1145 options bttv card=0 pll=1 radio=1 gpiomask=0x18e0 1146 gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff 1147 options tuner type=5 */ 1148 .name = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]", 1149 .video_inputs = 4, 1150 /* .audio_inputs= 1, */ 1151 .svhs = 2, 1152 .gpiomask = 0x18e0, 1153 .muxsel = MUXSEL(2, 3, 1, 1), 1154 .gpiomux = { 0x0000,0x0800,0x1000,0x1000 }, 1155 .gpiomute = 0x18e0, 1156 /* For cards with tda9820/tda9821: 1157 0x0000: Tuner normal stereo 1158 0x0080: Tuner A2 SAP (second audio program = Zweikanalton) 1159 0x0880: Tuner A2 stereo */ 1160 .pll = PLL_28, 1161 .tuner_type = UNSET, 1162 .tuner_addr = ADDR_UNSET, 1163 }, 1164 [BTTV_BOARD_BESTBUY_EASYTV] = { 1165 /* Miguel Angel Alvarez <maacruz@navegalia.com> 1166 old Easy TV BT848 version (model CPH031) */ 1167 .name = "Askey CPH031/ BESTBUY Easy TV", 1168 .video_inputs = 4, 1169 /* .audio_inputs= 1, */ 1170 .svhs = 2, 1171 .gpiomask = 0xF, 1172 .muxsel = MUXSEL(2, 3, 1, 0), 1173 .gpiomux = { 2, 0, 0, 0 }, 1174 .gpiomute = 10, 1175 .pll = PLL_28, 1176 .tuner_type = TUNER_TEMIC_PAL, 1177 .tuner_addr = ADDR_UNSET, 1178 }, 1179 1180 /* ---- card 0x38 ---------------------------------- */ 1181 [BTTV_BOARD_FLYVIDEO_98FM] = { 1182 /* Gordon Heydon <gjheydon@bigfoot.com ('98) */ 1183 .name = "Lifeview FlyVideo 98FM LR50", 1184 .video_inputs = 4, 1185 /* .audio_inputs= 3, */ 1186 .svhs = 2, 1187 .gpiomask = 0x1800, 1188 .muxsel = MUXSEL(2, 3, 1, 1), 1189 .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, 1190 .gpiomute = 0x1800, 1191 .pll = PLL_28, 1192 .tuner_type = TUNER_PHILIPS_PAL, 1193 .tuner_addr = ADDR_UNSET, 1194 }, 1195 /* This is the ultimate cheapo capture card 1196 * just a BT848A on a small PCB! 1197 * Steve Hosgood <steve@equiinet.com> */ 1198 [BTTV_BOARD_GRANDTEC] = { 1199 .name = "GrandTec 'Grand Video Capture' (Bt848)", 1200 .video_inputs = 2, 1201 /* .audio_inputs= 0, */ 1202 .svhs = 1, 1203 .gpiomask = 0, 1204 .muxsel = MUXSEL(3, 1), 1205 .gpiomux = { 0 }, 1206 .no_msp34xx = 1, 1207 .pll = PLL_35, 1208 .tuner_type = TUNER_ABSENT, 1209 .tuner_addr = ADDR_UNSET, 1210 }, 1211 [BTTV_BOARD_ASKEY_CPH060] = { 1212 /* Daniel Herrington <daniel.herrington@home.com> */ 1213 .name = "Askey CPH060/ Phoebe TV Master Only (No FM)", 1214 .video_inputs = 3, 1215 /* .audio_inputs= 1, */ 1216 .svhs = 2, 1217 .gpiomask = 0xe00, 1218 .muxsel = MUXSEL(2, 3, 1, 1), 1219 .gpiomux = { 0x400, 0x400, 0x400, 0x400 }, 1220 .gpiomute = 0x800, 1221 .pll = PLL_28, 1222 .tuner_type = TUNER_TEMIC_4036FY5_NTSC, 1223 .tuner_addr = ADDR_UNSET, 1224 }, 1225 [BTTV_BOARD_ASKEY_CPH03X] = { 1226 /* Matti Mottus <mottus@physic.ut.ee> */ 1227 .name = "Askey CPH03x TV Capturer", 1228 .video_inputs = 4, 1229 /* .audio_inputs= 1, */ 1230 .svhs = 2, 1231 .gpiomask = 0x03000F, 1232 .muxsel = MUXSEL(2, 3, 1, 0), 1233 .gpiomux = { 2, 0, 0, 0 }, 1234 .gpiomute = 1, 1235 .pll = PLL_28, 1236 .tuner_type = TUNER_TEMIC_PAL, 1237 .tuner_addr = ADDR_UNSET, 1238 .has_remote = 1, 1239 }, 1240 1241 /* ---- card 0x3c ---------------------------------- */ 1242 [BTTV_BOARD_MM100PCTV] = { 1243 /* Philip Blundell <philb@gnu.org> */ 1244 .name = "Modular Technology MM100PCTV", 1245 .video_inputs = 2, 1246 /* .audio_inputs= 2, */ 1247 .svhs = NO_SVHS, 1248 .gpiomask = 11, 1249 .muxsel = MUXSEL(2, 3, 1, 1), 1250 .gpiomux = { 2, 0, 0, 1 }, 1251 .gpiomute = 8, 1252 .pll = PLL_35, 1253 .tuner_type = TUNER_TEMIC_PAL, 1254 .tuner_addr = ADDR_UNSET, 1255 }, 1256 [BTTV_BOARD_GMV1] = { 1257 /* Adrian Cox <adrian@humboldt.co.uk */ 1258 .name = "AG Electronics GMV1", 1259 .video_inputs = 2, 1260 /* .audio_inputs= 0, */ 1261 .svhs = 1, 1262 .gpiomask = 0xF, 1263 .muxsel = MUXSEL(2, 2), 1264 .gpiomux = { }, 1265 .no_msp34xx = 1, 1266 .pll = PLL_28, 1267 .tuner_type = TUNER_ABSENT, 1268 .tuner_addr = ADDR_UNSET, 1269 }, 1270 [BTTV_BOARD_BESTBUY_EASYTV2] = { 1271 /* Miguel Angel Alvarez <maacruz@navegalia.com> 1272 new Easy TV BT878 version (model CPH061) 1273 special thanks to Informatica Mieres for providing the card */ 1274 .name = "Askey CPH061/ BESTBUY Easy TV (bt878)", 1275 .video_inputs = 3, 1276 /* .audio_inputs= 2, */ 1277 .svhs = 2, 1278 .gpiomask = 0xFF, 1279 .muxsel = MUXSEL(2, 3, 1, 0), 1280 .gpiomux = { 1, 0, 4, 4 }, 1281 .gpiomute = 9, 1282 .pll = PLL_28, 1283 .tuner_type = TUNER_PHILIPS_PAL, 1284 .tuner_addr = ADDR_UNSET, 1285 }, 1286 [BTTV_BOARD_ATI_TVWONDER] = { 1287 /* Lukas Gebauer <geby@volny.cz> */ 1288 .name = "ATI TV-Wonder", 1289 .video_inputs = 3, 1290 /* .audio_inputs= 1, */ 1291 .svhs = 2, 1292 .gpiomask = 0xf03f, 1293 .muxsel = MUXSEL(2, 3, 1, 0), 1294 .gpiomux = { 0xbffe, 0, 0xbfff, 0 }, 1295 .gpiomute = 0xbffe, 1296 .pll = PLL_28, 1297 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL, 1298 .tuner_addr = ADDR_UNSET, 1299 }, 1300 1301 /* ---- card 0x40 ---------------------------------- */ 1302 [BTTV_BOARD_ATI_TVWONDERVE] = { 1303 /* Lukas Gebauer <geby@volny.cz> */ 1304 .name = "ATI TV-Wonder VE", 1305 .video_inputs = 2, 1306 /* .audio_inputs= 1, */ 1307 .svhs = NO_SVHS, 1308 .gpiomask = 1, 1309 .muxsel = MUXSEL(2, 3, 0, 1), 1310 .gpiomux = { 0, 0, 1, 0 }, 1311 .no_msp34xx = 1, 1312 .pll = PLL_28, 1313 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL, 1314 .tuner_addr = ADDR_UNSET, 1315 }, 1316 [BTTV_BOARD_FLYVIDEO2000] = { 1317 /* DeeJay <deejay@westel900.net (2000S) */ 1318 .name = "Lifeview FlyVideo 2000S LR90", 1319 .video_inputs = 3, 1320 /* .audio_inputs= 3, */ 1321 .svhs = 2, 1322 .gpiomask = 0x18e0, 1323 .muxsel = MUXSEL(2, 3, 0, 1), 1324 /* Radio changed from 1e80 to 0x800 to make 1325 FlyVideo2000S in .hu happy (gm)*/ 1326 /* -dk-???: set mute=0x1800 for tda9874h daughterboard */ 1327 .gpiomux = { 0x0000,0x0800,0x1000,0x1000 }, 1328 .gpiomute = 0x1800, 1329 .audio_mode_gpio= fv2000s_audio, 1330 .no_msp34xx = 1, 1331 .pll = PLL_28, 1332 .tuner_type = TUNER_PHILIPS_PAL, 1333 .tuner_addr = ADDR_UNSET, 1334 }, 1335 [BTTV_BOARD_TERRATVALUER] = { 1336 .name = "Terratec TValueRadio", 1337 .video_inputs = 3, 1338 /* .audio_inputs= 1, */ 1339 .svhs = 2, 1340 .gpiomask = 0xffff00, 1341 .muxsel = MUXSEL(2, 3, 1, 1), 1342 .gpiomux = { 0x500, 0x500, 0x300, 0x900 }, 1343 .gpiomute = 0x900, 1344 .pll = PLL_28, 1345 .tuner_type = TUNER_PHILIPS_PAL, 1346 .tuner_addr = ADDR_UNSET, 1347 .has_radio = 1, 1348 }, 1349 [BTTV_BOARD_GVBCTV4PCI] = { 1350 /* TANAKA Kei <peg00625@nifty.com> */ 1351 .name = "IODATA GV-BCTV4/PCI", 1352 .video_inputs = 3, 1353 /* .audio_inputs= 1, */ 1354 .svhs = 2, 1355 .gpiomask = 0x010f00, 1356 .muxsel = MUXSEL(2, 3, 0, 0), 1357 .gpiomux = {0x10000, 0, 0x10000, 0 }, 1358 .no_msp34xx = 1, 1359 .pll = PLL_28, 1360 .tuner_type = TUNER_SHARP_2U5JF5540_NTSC, 1361 .tuner_addr = ADDR_UNSET, 1362 .audio_mode_gpio= gvbctv3pci_audio, 1363 }, 1364 1365 /* ---- card 0x44 ---------------------------------- */ 1366 [BTTV_BOARD_VOODOOTV_FM] = { 1367 .name = "3Dfx VoodooTV FM (Euro)", 1368 /* try "insmod msp3400 simple=0" if you have 1369 * sound problems with this card. */ 1370 .video_inputs = 4, 1371 /* .audio_inputs= 1, */ 1372 .svhs = NO_SVHS, 1373 .gpiomask = 0x4f8a00, 1374 /* 0x100000: 1=MSP enabled (0=disable again) 1375 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */ 1376 .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff }, 1377 .gpiomute = 0x947fff, 1378 /* tvtuner, radio, external,internal, mute, stereo 1379 * tuner, Composite, SVid, Composite-on-Svid-adapter */ 1380 .muxsel = MUXSEL(2, 3, 0, 1), 1381 .tuner_type = TUNER_MT2032, 1382 .tuner_addr = ADDR_UNSET, 1383 .pll = PLL_28, 1384 .has_radio = 1, 1385 }, 1386 [BTTV_BOARD_VOODOOTV_200] = { 1387 .name = "VoodooTV 200 (USA)", 1388 /* try "insmod msp3400 simple=0" if you have 1389 * sound problems with this card. */ 1390 .video_inputs = 4, 1391 /* .audio_inputs= 1, */ 1392 .svhs = NO_SVHS, 1393 .gpiomask = 0x4f8a00, 1394 /* 0x100000: 1=MSP enabled (0=disable again) 1395 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */ 1396 .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff }, 1397 .gpiomute = 0x947fff, 1398 /* tvtuner, radio, external,internal, mute, stereo 1399 * tuner, Composite, SVid, Composite-on-Svid-adapter */ 1400 .muxsel = MUXSEL(2, 3, 0, 1), 1401 .tuner_type = TUNER_MT2032, 1402 .tuner_addr = ADDR_UNSET, 1403 .pll = PLL_28, 1404 .has_radio = 1, 1405 }, 1406 [BTTV_BOARD_AIMMS] = { 1407 /* Philip Blundell <pb@nexus.co.uk> */ 1408 .name = "Active Imaging AIMMS", 1409 .video_inputs = 1, 1410 /* .audio_inputs= 0, */ 1411 .tuner_type = TUNER_ABSENT, 1412 .tuner_addr = ADDR_UNSET, 1413 .pll = PLL_28, 1414 .muxsel = MUXSEL(2), 1415 .gpiomask = 0 1416 }, 1417 [BTTV_BOARD_PV_BT878P_PLUS] = { 1418 /* Tomasz Pyra <hellfire@sedez.iq.pl> */ 1419 .name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)", 1420 .video_inputs = 3, 1421 /* .audio_inputs= 4, */ 1422 .svhs = 2, 1423 .gpiomask = 15, 1424 .muxsel = MUXSEL(2, 3, 1, 1), 1425 .gpiomux = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */ 1426 .gpiomute = 13, 1427 .pll = PLL_28, 1428 .tuner_type = TUNER_LG_PAL_I_FM, 1429 .tuner_addr = ADDR_UNSET, 1430 .has_remote = 1, 1431 /* GPIO wiring: 1432 GPIO0: U4.A0 (hef4052bt) 1433 GPIO1: U4.A1 1434 GPIO2: U4.A1 (second hef4052bt) 1435 GPIO3: U4.nEN, U5.A0, A5.nEN 1436 GPIO8-15: vrd866b ? 1437 */ 1438 }, 1439 [BTTV_BOARD_FLYVIDEO98EZ] = { 1440 .name = "Lifeview FlyVideo 98EZ (capture only) LR51", 1441 .video_inputs = 4, 1442 /* .audio_inputs= 0, */ 1443 .svhs = 2, 1444 /* AV1, AV2, SVHS, CVid adapter on SVHS */ 1445 .muxsel = MUXSEL(2, 3, 1, 1), 1446 .pll = PLL_28, 1447 .no_msp34xx = 1, 1448 .tuner_type = TUNER_ABSENT, 1449 .tuner_addr = ADDR_UNSET, 1450 }, 1451 1452 /* ---- card 0x48 ---------------------------------- */ 1453 [BTTV_BOARD_PV_BT878P_9B] = { 1454 /* Dariusz Kowalewski <darekk@automex.pl> */ 1455 .name = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)", 1456 .video_inputs = 4, 1457 /* .audio_inputs= 1, */ 1458 .svhs = 2, 1459 .gpiomask = 0x3f, 1460 .muxsel = MUXSEL(2, 3, 1, 1), 1461 .gpiomux = { 0x01, 0x00, 0x03, 0x03 }, 1462 .gpiomute = 0x09, 1463 .no_msp34xx = 1, 1464 .pll = PLL_28, 1465 .tuner_type = TUNER_PHILIPS_PAL, 1466 .tuner_addr = ADDR_UNSET, 1467 .audio_mode_gpio= pvbt878p9b_audio, /* Note: not all cards have stereo */ 1468 .has_radio = 1, /* Note: not all cards have radio */ 1469 .has_remote = 1, 1470 /* GPIO wiring: 1471 GPIO0: A0 hef4052 1472 GPIO1: A1 hef4052 1473 GPIO3: nEN hef4052 1474 GPIO8-15: vrd866b 1475 GPIO20,22,23: R30,R29,R28 1476 */ 1477 }, 1478 [BTTV_BOARD_SENSORAY311_611] = { 1479 /* Clay Kunz <ckunz@mail.arc.nasa.gov> */ 1480 /* you must jumper JP5 for the 311 card (PC/104+) to work */ 1481 .name = "Sensoray 311/611", 1482 .video_inputs = 5, 1483 /* .audio_inputs= 0, */ 1484 .svhs = 4, 1485 .gpiomask = 0, 1486 .muxsel = MUXSEL(2, 3, 1, 0, 0), 1487 .gpiomux = { 0 }, 1488 .tuner_type = TUNER_ABSENT, 1489 .tuner_addr = ADDR_UNSET, 1490 }, 1491 [BTTV_BOARD_RV605] = { 1492 /* Miguel Freitas <miguel@cetuc.puc-rio.br> */ 1493 .name = "RemoteVision MX (RV605)", 1494 .video_inputs = 16, 1495 /* .audio_inputs= 0, */ 1496 .svhs = NO_SVHS, 1497 .gpiomask = 0x00, 1498 .gpiomask2 = 0x07ff, 1499 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3), 1500 .no_msp34xx = 1, 1501 .tuner_type = TUNER_ABSENT, 1502 .tuner_addr = ADDR_UNSET, 1503 .muxsel_hook = rv605_muxsel, 1504 }, 1505 [BTTV_BOARD_POWERCLR_MTV878] = { 1506 .name = "Powercolor MTV878/ MTV878R/ MTV878F", 1507 .video_inputs = 3, 1508 /* .audio_inputs= 2, */ 1509 .svhs = 2, 1510 .gpiomask = 0x1C800F, /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */ 1511 .muxsel = MUXSEL(2, 1, 1), 1512 .gpiomux = { 0, 1, 2, 2 }, 1513 .gpiomute = 4, 1514 .tuner_type = TUNER_PHILIPS_PAL, 1515 .tuner_addr = ADDR_UNSET, 1516 .pll = PLL_28, 1517 .has_radio = 1, 1518 }, 1519 1520 /* ---- card 0x4c ---------------------------------- */ 1521 [BTTV_BOARD_WINDVR] = { 1522 /* Masaki Suzuki <masaki@btree.org> */ 1523 .name = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)", 1524 .video_inputs = 3, 1525 /* .audio_inputs= 1, */ 1526 .svhs = 2, 1527 .gpiomask = 0x140007, 1528 .muxsel = MUXSEL(2, 3, 1, 1), 1529 .gpiomux = { 0, 1, 2, 3 }, 1530 .gpiomute = 4, 1531 .tuner_type = TUNER_PHILIPS_NTSC, 1532 .tuner_addr = ADDR_UNSET, 1533 .audio_mode_gpio= windvr_audio, 1534 }, 1535 [BTTV_BOARD_GRANDTEC_MULTI] = { 1536 .name = "GrandTec Multi Capture Card (Bt878)", 1537 .video_inputs = 4, 1538 /* .audio_inputs= 0, */ 1539 .svhs = NO_SVHS, 1540 .gpiomask = 0, 1541 .muxsel = MUXSEL(2, 3, 1, 0), 1542 .gpiomux = { 0 }, 1543 .no_msp34xx = 1, 1544 .pll = PLL_28, 1545 .tuner_type = TUNER_ABSENT, 1546 .tuner_addr = ADDR_UNSET, 1547 }, 1548 [BTTV_BOARD_KWORLD] = { 1549 .name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF", 1550 .video_inputs = 4, 1551 /* .audio_inputs= 3, */ 1552 .svhs = 2, 1553 .gpiomask = 7, 1554 /* Tuner, SVid, SVHS, SVid to SVHS connector */ 1555 .muxsel = MUXSEL(2, 3, 1, 1), 1556 .gpiomux = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio! 1557 * This card lacks external Audio In, so we mute it on Ext. & Int. 1558 * The PCB can take a sbx1637/sbx1673, wiring unknown. 1559 * This card lacks PCI subsystem ID, sigh. 1560 * gpiomux =1: lower volume, 2+3: mute 1561 * btwincap uses 0x80000/0x80003 1562 */ 1563 .gpiomute = 4, 1564 .no_msp34xx = 1, 1565 .pll = PLL_28, 1566 .tuner_type = TUNER_PHILIPS_PAL, 1567 .tuner_addr = ADDR_UNSET, 1568 /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and 1569 radio signal strength indicators work fine. */ 1570 .has_radio = 1, 1571 /* GPIO Info: 1572 GPIO0,1: HEF4052 A0,A1 1573 GPIO2: HEF4052 nENABLE 1574 GPIO3-7: n.c. 1575 GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card] 1576 GPIO14,15: ?? 1577 GPIO16-21: n.c. 1578 GPIO22,23: ?? 1579 ?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/ 1580 }, 1581 [BTTV_BOARD_DSP_TCVIDEO] = { 1582 /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */ 1583 .name = "DSP Design TCVIDEO", 1584 .video_inputs = 4, 1585 .svhs = NO_SVHS, 1586 .muxsel = MUXSEL(2, 3, 1, 0), 1587 .pll = PLL_28, 1588 .tuner_type = UNSET, 1589 .tuner_addr = ADDR_UNSET, 1590 }, 1591 1592 /* ---- card 0x50 ---------------------------------- */ 1593 [BTTV_BOARD_HAUPPAUGEPVR] = { 1594 .name = "Hauppauge WinTV PVR", 1595 .video_inputs = 4, 1596 /* .audio_inputs= 1, */ 1597 .svhs = 2, 1598 .muxsel = MUXSEL(2, 0, 1, 1), 1599 .pll = PLL_28, 1600 .tuner_type = UNSET, 1601 .tuner_addr = ADDR_UNSET, 1602 1603 .gpiomask = 7, 1604 .gpiomux = {7}, 1605 }, 1606 [BTTV_BOARD_GVBCTV5PCI] = { 1607 .name = "IODATA GV-BCTV5/PCI", 1608 .video_inputs = 3, 1609 /* .audio_inputs= 1, */ 1610 .svhs = 2, 1611 .gpiomask = 0x0f0f80, 1612 .muxsel = MUXSEL(2, 3, 1, 0), 1613 .gpiomux = {0x030000, 0x010000, 0, 0 }, 1614 .gpiomute = 0x020000, 1615 .no_msp34xx = 1, 1616 .pll = PLL_28, 1617 .tuner_type = TUNER_PHILIPS_NTSC_M, 1618 .tuner_addr = ADDR_UNSET, 1619 .audio_mode_gpio= gvbctv5pci_audio, 1620 .has_radio = 1, 1621 }, 1622 [BTTV_BOARD_OSPREY1x0] = { 1623 .name = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */ 1624 .video_inputs = 4, /* id-inputs-clock */ 1625 /* .audio_inputs= 0, */ 1626 .svhs = 3, 1627 .muxsel = MUXSEL(3, 2, 0, 1), 1628 .pll = PLL_28, 1629 .tuner_type = TUNER_ABSENT, 1630 .tuner_addr = ADDR_UNSET, 1631 .no_msp34xx = 1, 1632 .no_tda7432 = 1, 1633 }, 1634 [BTTV_BOARD_OSPREY1x0_848] = { 1635 .name = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */ 1636 .video_inputs = 3, 1637 /* .audio_inputs= 0, */ 1638 .svhs = 2, 1639 .muxsel = MUXSEL(2, 3, 1), 1640 .pll = PLL_28, 1641 .tuner_type = TUNER_ABSENT, 1642 .tuner_addr = ADDR_UNSET, 1643 .no_msp34xx = 1, 1644 .no_tda7432 = 1, 1645 }, 1646 1647 /* ---- card 0x54 ---------------------------------- */ 1648 [BTTV_BOARD_OSPREY101_848] = { 1649 .name = "Osprey 101 (848)", /* 0x05-40C0-C1 */ 1650 .video_inputs = 2, 1651 /* .audio_inputs= 0, */ 1652 .svhs = 1, 1653 .muxsel = MUXSEL(3, 1), 1654 .pll = PLL_28, 1655 .tuner_type = TUNER_ABSENT, 1656 .tuner_addr = ADDR_UNSET, 1657 .no_msp34xx = 1, 1658 .no_tda7432 = 1, 1659 }, 1660 [BTTV_BOARD_OSPREY1x1] = { 1661 .name = "Osprey 101/151", /* 0x1(4|5)-0004-C4 */ 1662 .video_inputs = 1, 1663 /* .audio_inputs= 0, */ 1664 .svhs = NO_SVHS, 1665 .muxsel = MUXSEL(0), 1666 .pll = PLL_28, 1667 .tuner_type = TUNER_ABSENT, 1668 .tuner_addr = ADDR_UNSET, 1669 .no_msp34xx = 1, 1670 .no_tda7432 = 1, 1671 }, 1672 [BTTV_BOARD_OSPREY1x1_SVID] = { 1673 .name = "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */ 1674 .video_inputs = 2, 1675 /* .audio_inputs= 0, */ 1676 .svhs = 1, 1677 .muxsel = MUXSEL(0, 1), 1678 .pll = PLL_28, 1679 .tuner_type = TUNER_ABSENT, 1680 .tuner_addr = ADDR_UNSET, 1681 .no_msp34xx = 1, 1682 .no_tda7432 = 1, 1683 }, 1684 [BTTV_BOARD_OSPREY2xx] = { 1685 .name = "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */ 1686 .video_inputs = 1, 1687 /* .audio_inputs= 1, */ 1688 .svhs = NO_SVHS, 1689 .muxsel = MUXSEL(0), 1690 .pll = PLL_28, 1691 .tuner_type = TUNER_ABSENT, 1692 .tuner_addr = ADDR_UNSET, 1693 .no_msp34xx = 1, 1694 .no_tda7432 = 1, 1695 }, 1696 1697 /* ---- card 0x58 ---------------------------------- */ 1698 [BTTV_BOARD_OSPREY2x0_SVID] = { 1699 .name = "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */ 1700 .video_inputs = 2, 1701 /* .audio_inputs= 1, */ 1702 .svhs = 1, 1703 .muxsel = MUXSEL(0, 1), 1704 .pll = PLL_28, 1705 .tuner_type = TUNER_ABSENT, 1706 .tuner_addr = ADDR_UNSET, 1707 .no_msp34xx = 1, 1708 .no_tda7432 = 1, 1709 }, 1710 [BTTV_BOARD_OSPREY2x0] = { 1711 .name = "Osprey 210/220/230", /* 0x1(A|B)-04C0-C1 */ 1712 .video_inputs = 2, 1713 /* .audio_inputs= 1, */ 1714 .svhs = 1, 1715 .muxsel = MUXSEL(2, 3), 1716 .pll = PLL_28, 1717 .tuner_type = TUNER_ABSENT, 1718 .tuner_addr = ADDR_UNSET, 1719 .no_msp34xx = 1, 1720 .no_tda7432 = 1, 1721 }, 1722 [BTTV_BOARD_OSPREY500] = { 1723 .name = "Osprey 500", /* 500 */ 1724 .video_inputs = 2, 1725 /* .audio_inputs= 1, */ 1726 .svhs = 1, 1727 .muxsel = MUXSEL(2, 3), 1728 .pll = PLL_28, 1729 .tuner_type = TUNER_ABSENT, 1730 .tuner_addr = ADDR_UNSET, 1731 .no_msp34xx = 1, 1732 .no_tda7432 = 1, 1733 }, 1734 [BTTV_BOARD_OSPREY540] = { 1735 .name = "Osprey 540", /* 540 */ 1736 .video_inputs = 4, 1737 /* .audio_inputs= 1, */ 1738 .pll = PLL_28, 1739 .tuner_type = TUNER_ABSENT, 1740 .tuner_addr = ADDR_UNSET, 1741 .no_msp34xx = 1, 1742 .no_tda7432 = 1, 1743 }, 1744 1745 /* ---- card 0x5C ---------------------------------- */ 1746 [BTTV_BOARD_OSPREY2000] = { 1747 .name = "Osprey 2000", /* 2000 */ 1748 .video_inputs = 2, 1749 /* .audio_inputs= 1, */ 1750 .svhs = 1, 1751 .muxsel = MUXSEL(2, 3), 1752 .pll = PLL_28, 1753 .tuner_type = TUNER_ABSENT, 1754 .tuner_addr = ADDR_UNSET, 1755 .no_msp34xx = 1, 1756 .no_tda7432 = 1, /* must avoid, conflicts with the bt860 */ 1757 }, 1758 [BTTV_BOARD_IDS_EAGLE] = { 1759 /* M G Berberich <berberic@forwiss.uni-passau.de> */ 1760 .name = "IDS Eagle", 1761 .video_inputs = 4, 1762 /* .audio_inputs= 0, */ 1763 .tuner_type = TUNER_ABSENT, 1764 .tuner_addr = ADDR_UNSET, 1765 .svhs = NO_SVHS, 1766 .gpiomask = 0, 1767 .muxsel = MUXSEL(2, 2, 2, 2), 1768 .muxsel_hook = eagle_muxsel, 1769 .no_msp34xx = 1, 1770 .pll = PLL_28, 1771 }, 1772 [BTTV_BOARD_PINNACLESAT] = { 1773 .name = "Pinnacle PCTV Sat", 1774 .video_inputs = 2, 1775 /* .audio_inputs= 0, */ 1776 .svhs = 1, 1777 .tuner_type = TUNER_ABSENT, 1778 .tuner_addr = ADDR_UNSET, 1779 .no_msp34xx = 1, 1780 .no_tda7432 = 1, 1781 .muxsel = MUXSEL(3, 1), 1782 .pll = PLL_28, 1783 .no_gpioirq = 1, 1784 .has_dvb = 1, 1785 }, 1786 [BTTV_BOARD_FORMAC_PROTV] = { 1787 .name = "Formac ProTV II (bt878)", 1788 .video_inputs = 4, 1789 /* .audio_inputs= 1, */ 1790 .svhs = 3, 1791 .gpiomask = 2, 1792 /* TV, Comp1, Composite over SVID con, SVID */ 1793 .muxsel = MUXSEL(2, 3, 1, 1), 1794 .gpiomux = { 2, 2, 0, 0 }, 1795 .pll = PLL_28, 1796 .has_radio = 1, 1797 .tuner_type = TUNER_PHILIPS_PAL, 1798 .tuner_addr = ADDR_UNSET, 1799 /* sound routing: 1800 GPIO=0x00,0x01,0x03: mute (?) 1801 0x02: both TV and radio (tuner: FM1216/I) 1802 The card has onboard audio connectors labeled "cdrom" and "board", 1803 not soldered here, though unknown wiring. 1804 Card lacks: external audio in, pci subsystem id. 1805 */ 1806 }, 1807 1808 /* ---- card 0x60 ---------------------------------- */ 1809 [BTTV_BOARD_MACHTV] = { 1810 .name = "MachTV", 1811 .video_inputs = 3, 1812 /* .audio_inputs= 1, */ 1813 .svhs = NO_SVHS, 1814 .gpiomask = 7, 1815 .muxsel = MUXSEL(2, 3, 1, 1), 1816 .gpiomux = { 0, 1, 2, 3}, 1817 .gpiomute = 4, 1818 .tuner_type = TUNER_PHILIPS_PAL, 1819 .tuner_addr = ADDR_UNSET, 1820 .pll = PLL_28, 1821 }, 1822 [BTTV_BOARD_EURESYS_PICOLO] = { 1823 .name = "Euresys Picolo", 1824 .video_inputs = 3, 1825 /* .audio_inputs= 0, */ 1826 .svhs = 2, 1827 .gpiomask = 0, 1828 .no_msp34xx = 1, 1829 .no_tda7432 = 1, 1830 .muxsel = MUXSEL(2, 0, 1), 1831 .pll = PLL_28, 1832 .tuner_type = TUNER_ABSENT, 1833 .tuner_addr = ADDR_UNSET, 1834 }, 1835 [BTTV_BOARD_PV150] = { 1836 /* Luc Van Hoeylandt <luc@e-magic.be> */ 1837 .name = "ProVideo PV150", /* 0x4f */ 1838 .video_inputs = 2, 1839 /* .audio_inputs= 0, */ 1840 .svhs = NO_SVHS, 1841 .gpiomask = 0, 1842 .muxsel = MUXSEL(2, 3), 1843 .gpiomux = { 0 }, 1844 .no_msp34xx = 1, 1845 .pll = PLL_28, 1846 .tuner_type = TUNER_ABSENT, 1847 .tuner_addr = ADDR_UNSET, 1848 }, 1849 [BTTV_BOARD_AD_TVK503] = { 1850 /* Hiroshi Takekawa <sian@big.or.jp> */ 1851 /* This card lacks subsystem ID */ 1852 .name = "AD-TVK503", /* 0x63 */ 1853 .video_inputs = 4, 1854 /* .audio_inputs= 1, */ 1855 .svhs = 2, 1856 .gpiomask = 0x001e8007, 1857 .muxsel = MUXSEL(2, 3, 1, 0), 1858 /* Tuner, Radio, external, internal, off, on */ 1859 .gpiomux = { 0x08, 0x0f, 0x0a, 0x08 }, 1860 .gpiomute = 0x0f, 1861 .no_msp34xx = 1, 1862 .pll = PLL_28, 1863 .tuner_type = TUNER_PHILIPS_NTSC, 1864 .tuner_addr = ADDR_UNSET, 1865 .audio_mode_gpio= adtvk503_audio, 1866 }, 1867 1868 /* ---- card 0x64 ---------------------------------- */ 1869 [BTTV_BOARD_HERCULES_SM_TV] = { 1870 .name = "Hercules Smart TV Stereo", 1871 .video_inputs = 4, 1872 /* .audio_inputs= 1, */ 1873 .svhs = 2, 1874 .gpiomask = 0x00, 1875 .muxsel = MUXSEL(2, 3, 1, 1), 1876 .no_msp34xx = 1, 1877 .pll = PLL_28, 1878 .tuner_type = TUNER_PHILIPS_PAL, 1879 .tuner_addr = ADDR_UNSET, 1880 /* Notes: 1881 - card lacks subsystem ID 1882 - stereo variant w/ daughter board with tda9874a @0xb0 1883 - Audio Routing: 1884 always from tda9874 independent of GPIO (?) 1885 external line in: unknown 1886 - Other chips: em78p156elp @ 0x96 (probably IR remote control) 1887 hef4053 (instead 4052) for unknown function 1888 */ 1889 }, 1890 [BTTV_BOARD_PACETV] = { 1891 .name = "Pace TV & Radio Card", 1892 .video_inputs = 4, 1893 /* .audio_inputs= 1, */ 1894 .svhs = 2, 1895 /* Tuner, CVid, SVid, CVid over SVid connector */ 1896 .muxsel = MUXSEL(2, 3, 1, 1), 1897 .gpiomask = 0, 1898 .no_tda7432 = 1, 1899 .tuner_type = TUNER_PHILIPS_PAL_I, 1900 .tuner_addr = ADDR_UNSET, 1901 .has_radio = 1, 1902 .pll = PLL_28, 1903 /* Bt878, Bt832, FI1246 tuner; no pci subsystem id 1904 only internal line out: (4pin header) RGGL 1905 Radio must be decoded by msp3410d (not routed through)*/ 1906 /* 1907 .digital_mode = DIGITAL_MODE_CAMERA, todo! 1908 */ 1909 }, 1910 [BTTV_BOARD_IVC200] = { 1911 /* Chris Willing <chris@vislab.usyd.edu.au> */ 1912 .name = "IVC-200", 1913 .video_inputs = 1, 1914 /* .audio_inputs= 0, */ 1915 .tuner_type = TUNER_ABSENT, 1916 .tuner_addr = ADDR_UNSET, 1917 .svhs = NO_SVHS, 1918 .gpiomask = 0xdf, 1919 .muxsel = MUXSEL(2), 1920 .pll = PLL_28, 1921 }, 1922 [BTTV_BOARD_IVCE8784] = { 1923 .name = "IVCE-8784", 1924 .video_inputs = 1, 1925 /* .audio_inputs= 0, */ 1926 .tuner_type = TUNER_ABSENT, 1927 .tuner_addr = ADDR_UNSET, 1928 .svhs = NO_SVHS, 1929 .gpiomask = 0xdf, 1930 .muxsel = MUXSEL(2), 1931 .pll = PLL_28, 1932 }, 1933 [BTTV_BOARD_XGUARD] = { 1934 .name = "Grand X-Guard / Trust 814PCI", 1935 .video_inputs = 16, 1936 /* .audio_inputs= 0, */ 1937 .svhs = NO_SVHS, 1938 .tuner_type = TUNER_ABSENT, 1939 .tuner_addr = ADDR_UNSET, 1940 .gpiomask2 = 0xff, 1941 .muxsel = MUXSEL(2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0), 1942 .muxsel_hook = xguard_muxsel, 1943 .no_msp34xx = 1, 1944 .no_tda7432 = 1, 1945 .pll = PLL_28, 1946 }, 1947 1948 /* ---- card 0x68 ---------------------------------- */ 1949 [BTTV_BOARD_NEBULA_DIGITV] = { 1950 .name = "Nebula Electronics DigiTV", 1951 .video_inputs = 1, 1952 .svhs = NO_SVHS, 1953 .muxsel = MUXSEL(2, 3, 1, 0), 1954 .no_msp34xx = 1, 1955 .no_tda7432 = 1, 1956 .pll = PLL_28, 1957 .tuner_type = TUNER_ABSENT, 1958 .tuner_addr = ADDR_UNSET, 1959 .has_dvb = 1, 1960 .has_remote = 1, 1961 .gpiomask = 0x1b, 1962 .no_gpioirq = 1, 1963 }, 1964 [BTTV_BOARD_PV143] = { 1965 /* Jorge Boncompte - DTI2 <jorge@dti2.net> */ 1966 .name = "ProVideo PV143", 1967 .video_inputs = 4, 1968 /* .audio_inputs= 0, */ 1969 .svhs = NO_SVHS, 1970 .gpiomask = 0, 1971 .muxsel = MUXSEL(2, 3, 1, 0), 1972 .gpiomux = { 0 }, 1973 .no_msp34xx = 1, 1974 .pll = PLL_28, 1975 .tuner_type = TUNER_ABSENT, 1976 .tuner_addr = ADDR_UNSET, 1977 }, 1978 [BTTV_BOARD_VD009X1_VD011_MINIDIN] = { 1979 /* M.Klahr@phytec.de */ 1980 .name = "PHYTEC VD-009-X1 VD-011 MiniDIN (bt878)", 1981 .video_inputs = 4, 1982 /* .audio_inputs= 0, */ 1983 .svhs = 3, 1984 .gpiomask = 0x00, 1985 .muxsel = MUXSEL(2, 3, 1, 0), 1986 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 1987 .pll = PLL_28, 1988 .tuner_type = TUNER_ABSENT, 1989 .tuner_addr = ADDR_UNSET, 1990 }, 1991 [BTTV_BOARD_VD009X1_VD011_COMBI] = { 1992 .name = "PHYTEC VD-009-X1 VD-011 Combi (bt878)", 1993 .video_inputs = 4, 1994 /* .audio_inputs= 0, */ 1995 .svhs = 3, 1996 .gpiomask = 0x00, 1997 .muxsel = MUXSEL(2, 3, 1, 1), 1998 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 1999 .pll = PLL_28, 2000 .tuner_type = TUNER_ABSENT, 2001 .tuner_addr = ADDR_UNSET, 2002 }, 2003 2004 /* ---- card 0x6c ---------------------------------- */ 2005 [BTTV_BOARD_VD009_MINIDIN] = { 2006 .name = "PHYTEC VD-009 MiniDIN (bt878)", 2007 .video_inputs = 10, 2008 /* .audio_inputs= 0, */ 2009 .svhs = 9, 2010 .gpiomask = 0x00, 2011 .gpiomask2 = 0x03, /* used for external video mux */ 2012 .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 0), 2013 .muxsel_hook = phytec_muxsel, 2014 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 2015 .pll = PLL_28, 2016 .tuner_type = TUNER_ABSENT, 2017 .tuner_addr = ADDR_UNSET, 2018 }, 2019 [BTTV_BOARD_VD009_COMBI] = { 2020 .name = "PHYTEC VD-009 Combi (bt878)", 2021 .video_inputs = 10, 2022 /* .audio_inputs= 0, */ 2023 .svhs = 9, 2024 .gpiomask = 0x00, 2025 .gpiomask2 = 0x03, /* used for external video mux */ 2026 .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), 2027 .muxsel_hook = phytec_muxsel, 2028 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 2029 .pll = PLL_28, 2030 .tuner_type = TUNER_ABSENT, 2031 .tuner_addr = ADDR_UNSET, 2032 }, 2033 [BTTV_BOARD_IVC100] = { 2034 .name = "IVC-100", 2035 .video_inputs = 4, 2036 /* .audio_inputs= 0, */ 2037 .tuner_type = TUNER_ABSENT, 2038 .tuner_addr = ADDR_UNSET, 2039 .svhs = NO_SVHS, 2040 .gpiomask = 0xdf, 2041 .muxsel = MUXSEL(2, 3, 1, 0), 2042 .pll = PLL_28, 2043 }, 2044 [BTTV_BOARD_IVC120] = { 2045 /* IVC-120G - Alan Garfield <alan@fromorbit.com> */ 2046 .name = "IVC-120G", 2047 .video_inputs = 16, 2048 /* .audio_inputs= 0, */ 2049 .tuner_type = TUNER_ABSENT, 2050 .tuner_addr = ADDR_UNSET, 2051 .svhs = NO_SVHS, /* card has no svhs */ 2052 .no_msp34xx = 1, 2053 .no_tda7432 = 1, 2054 .gpiomask = 0x00, 2055 .muxsel = MUXSEL(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0), 2056 .muxsel_hook = ivc120_muxsel, 2057 .pll = PLL_28, 2058 }, 2059 2060 /* ---- card 0x70 ---------------------------------- */ 2061 [BTTV_BOARD_PC_HDTV] = { 2062 .name = "pcHDTV HD-2000 TV", 2063 .video_inputs = 4, 2064 /* .audio_inputs= 1, */ 2065 .svhs = 2, 2066 .muxsel = MUXSEL(2, 3, 1, 0), 2067 .tuner_type = TUNER_PHILIPS_FCV1236D, 2068 .tuner_addr = ADDR_UNSET, 2069 .has_dvb = 1, 2070 }, 2071 [BTTV_BOARD_TWINHAN_DST] = { 2072 .name = "Twinhan DST + clones", 2073 .no_msp34xx = 1, 2074 .no_tda7432 = 1, 2075 .tuner_type = TUNER_ABSENT, 2076 .tuner_addr = ADDR_UNSET, 2077 .no_video = 1, 2078 .has_dvb = 1, 2079 }, 2080 [BTTV_BOARD_WINFASTVC100] = { 2081 .name = "Winfast VC100", 2082 .video_inputs = 3, 2083 /* .audio_inputs= 0, */ 2084 .svhs = 1, 2085 /* Vid In, SVid In, Vid over SVid in connector */ 2086 .muxsel = MUXSEL(3, 1, 1, 3), 2087 .no_msp34xx = 1, 2088 .no_tda7432 = 1, 2089 .tuner_type = TUNER_ABSENT, 2090 .tuner_addr = ADDR_UNSET, 2091 .pll = PLL_28, 2092 }, 2093 [BTTV_BOARD_TEV560] = { 2094 .name = "Teppro TEV-560/InterVision IV-560", 2095 .video_inputs = 3, 2096 /* .audio_inputs= 1, */ 2097 .svhs = 2, 2098 .gpiomask = 3, 2099 .muxsel = MUXSEL(2, 3, 1, 1), 2100 .gpiomux = { 1, 1, 1, 1 }, 2101 .tuner_type = TUNER_PHILIPS_PAL, 2102 .tuner_addr = ADDR_UNSET, 2103 .pll = PLL_35, 2104 }, 2105 2106 /* ---- card 0x74 ---------------------------------- */ 2107 [BTTV_BOARD_SIMUS_GVC1100] = { 2108 .name = "SIMUS GVC1100", 2109 .video_inputs = 4, 2110 /* .audio_inputs= 0, */ 2111 .svhs = NO_SVHS, 2112 .tuner_type = TUNER_ABSENT, 2113 .tuner_addr = ADDR_UNSET, 2114 .pll = PLL_28, 2115 .muxsel = MUXSEL(2, 2, 2, 2), 2116 .gpiomask = 0x3F, 2117 .muxsel_hook = gvc1100_muxsel, 2118 }, 2119 [BTTV_BOARD_NGSTV_PLUS] = { 2120 /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */ 2121 .name = "NGS NGSTV+", 2122 .video_inputs = 3, 2123 .svhs = 2, 2124 .gpiomask = 0x008007, 2125 .muxsel = MUXSEL(2, 3, 0, 0), 2126 .gpiomux = { 0, 0, 0, 0 }, 2127 .gpiomute = 0x000003, 2128 .pll = PLL_28, 2129 .tuner_type = TUNER_PHILIPS_PAL, 2130 .tuner_addr = ADDR_UNSET, 2131 .has_remote = 1, 2132 }, 2133 [BTTV_BOARD_LMLBT4] = { 2134 /* http://linuxmedialabs.com */ 2135 .name = "LMLBT4", 2136 .video_inputs = 4, /* IN1,IN2,IN3,IN4 */ 2137 /* .audio_inputs= 0, */ 2138 .svhs = NO_SVHS, 2139 .muxsel = MUXSEL(2, 3, 1, 0), 2140 .no_msp34xx = 1, 2141 .no_tda7432 = 1, 2142 .tuner_type = TUNER_ABSENT, 2143 .tuner_addr = ADDR_UNSET, 2144 }, 2145 [BTTV_BOARD_TEKRAM_M205] = { 2146 /* Helmroos Harri <harri.helmroos@pp.inet.fi> */ 2147 .name = "Tekram M205 PRO", 2148 .video_inputs = 3, 2149 /* .audio_inputs= 1, */ 2150 .tuner_type = TUNER_PHILIPS_PAL, 2151 .tuner_addr = ADDR_UNSET, 2152 .svhs = 2, 2153 .gpiomask = 0x68, 2154 .muxsel = MUXSEL(2, 3, 1), 2155 .gpiomux = { 0x68, 0x68, 0x61, 0x61 }, 2156 .pll = PLL_28, 2157 }, 2158 2159 /* ---- card 0x78 ---------------------------------- */ 2160 [BTTV_BOARD_CONTVFMI] = { 2161 /* Javier Cendan Ares <jcendan@lycos.es> */ 2162 /* bt878 TV + FM without subsystem ID */ 2163 .name = "Conceptronic CONTVFMi", 2164 .video_inputs = 3, 2165 /* .audio_inputs= 1, */ 2166 .svhs = 2, 2167 .gpiomask = 0x008007, 2168 .muxsel = MUXSEL(2, 3, 1, 1), 2169 .gpiomux = { 0, 1, 2, 2 }, 2170 .gpiomute = 3, 2171 .pll = PLL_28, 2172 .tuner_type = TUNER_PHILIPS_PAL, 2173 .tuner_addr = ADDR_UNSET, 2174 .has_remote = 1, 2175 .has_radio = 1, 2176 }, 2177 [BTTV_BOARD_PICOLO_TETRA_CHIP] = { 2178 /*Eric DEBIEF <debief@telemsa.com>*/ 2179 /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controlled*/ 2180 /*adds picolo_tetra_muxsel(), picolo_tetra_init(), the following declaration*/ 2181 /*structure and #define BTTV_BOARD_PICOLO_TETRA_CHIP 0x79 in bttv.h*/ 2182 .name = "Euresys Picolo Tetra", 2183 .video_inputs = 4, 2184 /* .audio_inputs= 0, */ 2185 .svhs = NO_SVHS, 2186 .gpiomask = 0, 2187 .gpiomask2 = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/ 2188 .no_msp34xx = 1, 2189 .no_tda7432 = 1, 2190 /*878A input is always MUX0, see above.*/ 2191 .muxsel = MUXSEL(2, 2, 2, 2), 2192 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 2193 .pll = PLL_28, 2194 .muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/ 2195 .tuner_type = TUNER_ABSENT, 2196 .tuner_addr = ADDR_UNSET, 2197 }, 2198 [BTTV_BOARD_SPIRIT_TV] = { 2199 /* Spirit TV Tuner from http://spiritmodems.com.au */ 2200 /* Stafford Goodsell <surge@goliath.homeunix.org> */ 2201 .name = "Spirit TV Tuner", 2202 .video_inputs = 3, 2203 /* .audio_inputs= 1, */ 2204 .svhs = 2, 2205 .gpiomask = 0x0000000f, 2206 .muxsel = MUXSEL(2, 1, 1), 2207 .gpiomux = { 0x02, 0x00, 0x00, 0x00 }, 2208 .tuner_type = TUNER_TEMIC_PAL, 2209 .tuner_addr = ADDR_UNSET, 2210 .no_msp34xx = 1, 2211 }, 2212 [BTTV_BOARD_AVDVBT_771] = { 2213 /* Wolfram Joost <wojo@frokaschwei.de> */ 2214 .name = "AVerMedia AVerTV DVB-T 771", 2215 .video_inputs = 2, 2216 .svhs = 1, 2217 .tuner_type = TUNER_ABSENT, 2218 .tuner_addr = ADDR_UNSET, 2219 .muxsel = MUXSEL(3, 3), 2220 .no_msp34xx = 1, 2221 .no_tda7432 = 1, 2222 .pll = PLL_28, 2223 .has_dvb = 1, 2224 .no_gpioirq = 1, 2225 .has_remote = 1, 2226 }, 2227 /* ---- card 0x7c ---------------------------------- */ 2228 [BTTV_BOARD_AVDVBT_761] = { 2229 /* Matt Jesson <dvb@jesson.eclipse.co.uk> */ 2230 /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */ 2231 .name = "AverMedia AverTV DVB-T 761", 2232 .video_inputs = 2, 2233 .svhs = 1, 2234 .muxsel = MUXSEL(3, 1, 2, 0), /* Comp0, S-Video, ?, ? */ 2235 .no_msp34xx = 1, 2236 .no_tda7432 = 1, 2237 .pll = PLL_28, 2238 .tuner_type = TUNER_ABSENT, 2239 .tuner_addr = ADDR_UNSET, 2240 .has_dvb = 1, 2241 .no_gpioirq = 1, 2242 .has_remote = 1, 2243 }, 2244 [BTTV_BOARD_MATRIX_VISIONSQ] = { 2245 /* andre.schwarz@matrix-vision.de */ 2246 .name = "MATRIX Vision Sigma-SQ", 2247 .video_inputs = 16, 2248 /* .audio_inputs= 0, */ 2249 .svhs = NO_SVHS, 2250 .gpiomask = 0x0, 2251 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3), 2252 .muxsel_hook = sigmaSQ_muxsel, 2253 .gpiomux = { 0 }, 2254 .no_msp34xx = 1, 2255 .pll = PLL_28, 2256 .tuner_type = TUNER_ABSENT, 2257 .tuner_addr = ADDR_UNSET, 2258 }, 2259 [BTTV_BOARD_MATRIX_VISIONSLC] = { 2260 /* andre.schwarz@matrix-vision.de */ 2261 .name = "MATRIX Vision Sigma-SLC", 2262 .video_inputs = 4, 2263 /* .audio_inputs= 0, */ 2264 .svhs = NO_SVHS, 2265 .gpiomask = 0x0, 2266 .muxsel = MUXSEL(2, 2, 2, 2), 2267 .muxsel_hook = sigmaSLC_muxsel, 2268 .gpiomux = { 0 }, 2269 .no_msp34xx = 1, 2270 .pll = PLL_28, 2271 .tuner_type = TUNER_ABSENT, 2272 .tuner_addr = ADDR_UNSET, 2273 }, 2274 /* BTTV_BOARD_APAC_VIEWCOMP */ 2275 [BTTV_BOARD_APAC_VIEWCOMP] = { 2276 /* Attila Kondoros <attila.kondoros@chello.hu> */ 2277 /* bt878 TV + FM 0x00000000 subsystem ID */ 2278 .name = "APAC Viewcomp 878(AMAX)", 2279 .video_inputs = 2, 2280 /* .audio_inputs= 1, */ 2281 .svhs = NO_SVHS, 2282 .gpiomask = 0xFF, 2283 .muxsel = MUXSEL(2, 3, 1, 1), 2284 .gpiomux = { 2, 0, 0, 0 }, 2285 .gpiomute = 10, 2286 .pll = PLL_28, 2287 .tuner_type = TUNER_PHILIPS_PAL, 2288 .tuner_addr = ADDR_UNSET, 2289 .has_remote = 1, /* miniremote works, see ir-kbd-gpio.c */ 2290 .has_radio = 1, /* not every card has radio */ 2291 }, 2292 2293 /* ---- card 0x80 ---------------------------------- */ 2294 [BTTV_BOARD_DVICO_DVBT_LITE] = { 2295 /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */ 2296 .name = "DViCO FusionHDTV DVB-T Lite", 2297 .no_msp34xx = 1, 2298 .no_tda7432 = 1, 2299 .pll = PLL_28, 2300 .no_video = 1, 2301 .has_dvb = 1, 2302 .tuner_type = TUNER_ABSENT, 2303 .tuner_addr = ADDR_UNSET, 2304 }, 2305 [BTTV_BOARD_VGEAR_MYVCD] = { 2306 /* Steven <photon38@pchome.com.tw> */ 2307 .name = "V-Gear MyVCD", 2308 .video_inputs = 3, 2309 /* .audio_inputs= 1, */ 2310 .svhs = 2, 2311 .gpiomask = 0x3f, 2312 .muxsel = MUXSEL(2, 3, 1, 0), 2313 .gpiomux = {0x31, 0x31, 0x31, 0x31 }, 2314 .gpiomute = 0x31, 2315 .no_msp34xx = 1, 2316 .pll = PLL_28, 2317 .tuner_type = TUNER_PHILIPS_NTSC_M, 2318 .tuner_addr = ADDR_UNSET, 2319 .has_radio = 0, 2320 }, 2321 [BTTV_BOARD_SUPER_TV] = { 2322 /* Rick C <cryptdragoon@gmail.com> */ 2323 .name = "Super TV Tuner", 2324 .video_inputs = 4, 2325 /* .audio_inputs= 1, */ 2326 .svhs = 2, 2327 .muxsel = MUXSEL(2, 3, 1, 0), 2328 .tuner_type = TUNER_PHILIPS_NTSC, 2329 .tuner_addr = ADDR_UNSET, 2330 .gpiomask = 0x008007, 2331 .gpiomux = { 0, 0x000001,0,0 }, 2332 .has_radio = 1, 2333 }, 2334 [BTTV_BOARD_TIBET_CS16] = { 2335 /* Chris Fanning <video4linux@haydon.net> */ 2336 .name = "Tibet Systems 'Progress DVR' CS16", 2337 .video_inputs = 16, 2338 /* .audio_inputs= 0, */ 2339 .svhs = NO_SVHS, 2340 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2), 2341 .pll = PLL_28, 2342 .no_msp34xx = 1, 2343 .no_tda7432 = 1, 2344 .tuner_type = TUNER_ABSENT, 2345 .tuner_addr = ADDR_UNSET, 2346 .muxsel_hook = tibetCS16_muxsel, 2347 }, 2348 [BTTV_BOARD_KODICOM_4400R] = { 2349 /* Bill Brack <wbrack@mmm.com.hk> */ 2350 /* 2351 * Note that, because of the card's wiring, the "master" 2352 * BT878A chip (i.e. the one which controls the analog switch 2353 * and must use this card type) is the 2nd one detected. The 2354 * other 3 chips should use card type 0x85, whose description 2355 * follows this one. There is a EEPROM on the card (which is 2356 * connected to the I2C of one of those other chips), but is 2357 * not currently handled. There is also a facility for a 2358 * "monitor", which is also not currently implemented. 2359 */ 2360 .name = "Kodicom 4400R (master)", 2361 .video_inputs = 16, 2362 /* .audio_inputs= 0, */ 2363 .tuner_type = TUNER_ABSENT, 2364 .tuner_addr = ADDR_UNSET, 2365 .svhs = NO_SVHS, 2366 /* GPIO bits 0-9 used for analog switch: 2367 * 00 - 03: camera selector 2368 * 04 - 06: channel (controller) selector 2369 * 07: data (1->on, 0->off) 2370 * 08: strobe 2371 * 09: reset 2372 * bit 16 is input from sync separator for the channel 2373 */ 2374 .gpiomask = 0x0003ff, 2375 .no_gpioirq = 1, 2376 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3), 2377 .pll = PLL_28, 2378 .no_msp34xx = 1, 2379 .no_tda7432 = 1, 2380 .muxsel_hook = kodicom4400r_muxsel, 2381 }, 2382 [BTTV_BOARD_KODICOM_4400R_SL] = { 2383 /* Bill Brack <wbrack@mmm.com.hk> */ 2384 /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the 2385 * one which controls the analog switch, and must use the card type) 2386 * is the 2nd one detected. The other 3 chips should use this card 2387 * type 2388 */ 2389 .name = "Kodicom 4400R (slave)", 2390 .video_inputs = 16, 2391 /* .audio_inputs= 0, */ 2392 .tuner_type = TUNER_ABSENT, 2393 .tuner_addr = ADDR_UNSET, 2394 .svhs = NO_SVHS, 2395 .gpiomask = 0x010000, 2396 .no_gpioirq = 1, 2397 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3), 2398 .pll = PLL_28, 2399 .no_msp34xx = 1, 2400 .no_tda7432 = 1, 2401 .muxsel_hook = kodicom4400r_muxsel, 2402 }, 2403 /* ---- card 0x86---------------------------------- */ 2404 [BTTV_BOARD_ADLINK_RTV24] = { 2405 /* Michael Henson <mhenson@clarityvi.com> */ 2406 /* Adlink RTV24 with special unlock codes */ 2407 .name = "Adlink RTV24", 2408 .video_inputs = 4, 2409 /* .audio_inputs= 1, */ 2410 .svhs = 2, 2411 .muxsel = MUXSEL(2, 3, 1, 0), 2412 .tuner_type = UNSET, 2413 .tuner_addr = ADDR_UNSET, 2414 .pll = PLL_28, 2415 }, 2416 /* ---- card 0x87---------------------------------- */ 2417 [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = { 2418 /* Michael Krufky <mkrufky@linuxtv.org> */ 2419 .name = "DViCO FusionHDTV 5 Lite", 2420 .tuner_type = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */ 2421 .tuner_addr = ADDR_UNSET, 2422 .video_inputs = 3, 2423 /* .audio_inputs= 1, */ 2424 .svhs = 2, 2425 .muxsel = MUXSEL(2, 3, 1), 2426 .gpiomask = 0x00e00007, 2427 .gpiomux = { 0x00400005, 0, 0x00000001, 0 }, 2428 .gpiomute = 0x00c00007, 2429 .no_msp34xx = 1, 2430 .no_tda7432 = 1, 2431 .has_dvb = 1, 2432 }, 2433 /* ---- card 0x88---------------------------------- */ 2434 [BTTV_BOARD_ACORP_Y878F] = { 2435 /* Mauro Carvalho Chehab <mchehab@kernel.org> */ 2436 .name = "Acorp Y878F", 2437 .video_inputs = 3, 2438 /* .audio_inputs= 1, */ 2439 .svhs = 2, 2440 .gpiomask = 0x01fe00, 2441 .muxsel = MUXSEL(2, 3, 1, 1), 2442 .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 }, 2443 .gpiomute = 0x002000, 2444 .pll = PLL_28, 2445 .tuner_type = TUNER_YMEC_TVF66T5_B_DFF, 2446 .tuner_addr = 0xc1 >>1, 2447 .has_radio = 1, 2448 }, 2449 /* ---- card 0x89 ---------------------------------- */ 2450 [BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = { 2451 .name = "Conceptronic CTVFMi v2", 2452 .video_inputs = 3, 2453 /* .audio_inputs= 1, */ 2454 .svhs = 2, 2455 .gpiomask = 0x001c0007, 2456 .muxsel = MUXSEL(2, 3, 1, 1), 2457 .gpiomux = { 0, 1, 2, 2 }, 2458 .gpiomute = 3, 2459 .pll = PLL_28, 2460 .tuner_type = TUNER_TENA_9533_DI, 2461 .tuner_addr = ADDR_UNSET, 2462 .has_remote = 1, 2463 .has_radio = 1, 2464 }, 2465 /* ---- card 0x8a ---------------------------------- */ 2466 [BTTV_BOARD_PV_BT878P_2E] = { 2467 .name = "Prolink Pixelview PV-BT878P+ (Rev.2E)", 2468 .video_inputs = 5, 2469 /* .audio_inputs= 1, */ 2470 .svhs = 3, 2471 .has_dig_in = 1, 2472 .gpiomask = 0x01fe00, 2473 .muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */ 2474 /* .digital_mode= DIGITAL_MODE_CAMERA, */ 2475 .gpiomux = { 0x00400, 0x10400, 0x04400, 0x80000 }, 2476 .gpiomute = 0x12400, 2477 .no_msp34xx = 1, 2478 .pll = PLL_28, 2479 .tuner_type = TUNER_LG_PAL_FM, 2480 .tuner_addr = ADDR_UNSET, 2481 .has_remote = 1, 2482 }, 2483 /* ---- card 0x8b ---------------------------------- */ 2484 [BTTV_BOARD_PV_M4900] = { 2485 /* Sérgio Fortier <sergiofortier@yahoo.com.br> */ 2486 .name = "Prolink PixelView PlayTV MPEG2 PV-M4900", 2487 .video_inputs = 3, 2488 /* .audio_inputs= 1, */ 2489 .svhs = 2, 2490 .gpiomask = 0x3f, 2491 .muxsel = MUXSEL(2, 3, 1, 1), 2492 .gpiomux = { 0x21, 0x20, 0x24, 0x2c }, 2493 .gpiomute = 0x29, 2494 .no_msp34xx = 1, 2495 .pll = PLL_28, 2496 .tuner_type = TUNER_YMEC_TVF_5533MF, 2497 .tuner_addr = ADDR_UNSET, 2498 .has_radio = 1, 2499 .has_remote = 1, 2500 }, 2501 /* ---- card 0x8c ---------------------------------- */ 2502 /* Has four Bt878 chips behind a PCI bridge, each chip has: 2503 one external BNC composite input (mux 2) 2504 three internal composite inputs (unknown muxes) 2505 an 18-bit stereo A/D (CS5331A), which has: 2506 one external stereo unbalanced (RCA) audio connection 2507 one (or 3?) internal stereo balanced (XLR) audio connection 2508 input is selected via gpio to a 14052B mux 2509 (mask=0x300, unbal=0x000, bal=0x100, ??=0x200,0x300) 2510 gain is controlled via an X9221A chip on the I2C bus @0x28 2511 sample rate is controlled via gpio to an MK1413S 2512 (mask=0x3, 32kHz=0x0, 44.1kHz=0x1, 48kHz=0x2, ??=0x3) 2513 There is neither a tuner nor an svideo input. */ 2514 [BTTV_BOARD_OSPREY440] = { 2515 .name = "Osprey 440", 2516 .video_inputs = 4, 2517 /* .audio_inputs= 2, */ 2518 .svhs = NO_SVHS, 2519 .muxsel = MUXSEL(2, 3, 0, 1), /* 3,0,1 are guesses */ 2520 .gpiomask = 0x303, 2521 .gpiomute = 0x000, /* int + 32kHz */ 2522 .gpiomux = { 0, 0, 0x000, 0x100}, 2523 .pll = PLL_28, 2524 .tuner_type = TUNER_ABSENT, 2525 .tuner_addr = ADDR_UNSET, 2526 .no_msp34xx = 1, 2527 .no_tda7432 = 1, 2528 }, 2529 /* ---- card 0x8d ---------------------------------- */ 2530 [BTTV_BOARD_ASOUND_SKYEYE] = { 2531 .name = "Asound Skyeye PCTV", 2532 .video_inputs = 3, 2533 /* .audio_inputs= 1, */ 2534 .svhs = 2, 2535 .gpiomask = 15, 2536 .muxsel = MUXSEL(2, 3, 1, 1), 2537 .gpiomux = { 2, 0, 0, 0 }, 2538 .gpiomute = 1, 2539 .pll = PLL_28, 2540 .tuner_type = TUNER_PHILIPS_NTSC, 2541 .tuner_addr = ADDR_UNSET, 2542 }, 2543 /* ---- card 0x8e ---------------------------------- */ 2544 [BTTV_BOARD_SABRENT_TVFM] = { 2545 .name = "Sabrent TV-FM (bttv version)", 2546 .video_inputs = 3, 2547 /* .audio_inputs= 1, */ 2548 .svhs = 2, 2549 .gpiomask = 0x108007, 2550 .muxsel = MUXSEL(2, 3, 1, 1), 2551 .gpiomux = { 100000, 100002, 100002, 100000 }, 2552 .no_msp34xx = 1, 2553 .no_tda7432 = 1, 2554 .pll = PLL_28, 2555 .tuner_type = TUNER_TNF_5335MF, 2556 .tuner_addr = ADDR_UNSET, 2557 .has_radio = 1, 2558 }, 2559 /* ---- card 0x8f ---------------------------------- */ 2560 [BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = { 2561 .name = "Hauppauge ImpactVCB (bt878)", 2562 .video_inputs = 4, 2563 /* .audio_inputs= 0, */ 2564 .svhs = NO_SVHS, 2565 .gpiomask = 0x0f, /* old: 7 */ 2566 .muxsel = MUXSEL(0, 1, 3, 2), /* Composite 0-3 */ 2567 .no_msp34xx = 1, 2568 .no_tda7432 = 1, 2569 .tuner_type = TUNER_ABSENT, 2570 .tuner_addr = ADDR_UNSET, 2571 }, 2572 [BTTV_BOARD_MACHTV_MAGICTV] = { 2573 /* Julian Calaby <julian.calaby@gmail.com> 2574 * Slightly different from original MachTV definition (0x60) 2575 2576 * FIXME: RegSpy says gpiomask should be "0x001c800f", but it 2577 * stuffs up remote chip. Bug is a pin on the jaecs is not set 2578 * properly (methinks) causing no keyup bits being set */ 2579 2580 .name = "MagicTV", /* rebranded MachTV */ 2581 .video_inputs = 3, 2582 /* .audio_inputs= 1, */ 2583 .svhs = 2, 2584 .gpiomask = 7, 2585 .muxsel = MUXSEL(2, 3, 1, 1), 2586 .gpiomux = { 0, 1, 2, 3 }, 2587 .gpiomute = 4, 2588 .tuner_type = TUNER_TEMIC_4009FR5_PAL, 2589 .tuner_addr = ADDR_UNSET, 2590 .pll = PLL_28, 2591 .has_radio = 1, 2592 .has_remote = 1, 2593 }, 2594 [BTTV_BOARD_SSAI_SECURITY] = { 2595 .name = "SSAI Security Video Interface", 2596 .video_inputs = 4, 2597 /* .audio_inputs= 0, */ 2598 .svhs = NO_SVHS, 2599 .muxsel = MUXSEL(0, 1, 2, 3), 2600 .tuner_type = TUNER_ABSENT, 2601 .tuner_addr = ADDR_UNSET, 2602 }, 2603 [BTTV_BOARD_SSAI_ULTRASOUND] = { 2604 .name = "SSAI Ultrasound Video Interface", 2605 .video_inputs = 2, 2606 /* .audio_inputs= 0, */ 2607 .svhs = 1, 2608 .muxsel = MUXSEL(2, 0, 1, 3), 2609 .tuner_type = TUNER_ABSENT, 2610 .tuner_addr = ADDR_UNSET, 2611 }, 2612 /* ---- card 0x94---------------------------------- */ 2613 [BTTV_BOARD_DVICO_FUSIONHDTV_2] = { 2614 .name = "DViCO FusionHDTV 2", 2615 .tuner_type = TUNER_PHILIPS_FCV1236D, 2616 .tuner_addr = ADDR_UNSET, 2617 .video_inputs = 3, 2618 /* .audio_inputs= 1, */ 2619 .svhs = 2, 2620 .muxsel = MUXSEL(2, 3, 1), 2621 .gpiomask = 0x00e00007, 2622 .gpiomux = { 0x00400005, 0, 0x00000001, 0 }, 2623 .gpiomute = 0x00c00007, 2624 .no_msp34xx = 1, 2625 .no_tda7432 = 1, 2626 }, 2627 /* ---- card 0x95---------------------------------- */ 2628 [BTTV_BOARD_TYPHOON_TVTUNERPCI] = { 2629 .name = "Typhoon TV-Tuner PCI (50684)", 2630 .video_inputs = 3, 2631 /* .audio_inputs= 1, */ 2632 .svhs = 2, 2633 .gpiomask = 0x3014f, 2634 .muxsel = MUXSEL(2, 3, 1, 1), 2635 .gpiomux = { 0x20001,0x10001, 0, 0 }, 2636 .gpiomute = 10, 2637 .pll = PLL_28, 2638 .tuner_type = TUNER_PHILIPS_PAL_I, 2639 .tuner_addr = ADDR_UNSET, 2640 }, 2641 [BTTV_BOARD_GEOVISION_GV600] = { 2642 /* emhn@usb.ve */ 2643 .name = "Geovision GV-600", 2644 .video_inputs = 16, 2645 /* .audio_inputs= 0, */ 2646 .svhs = NO_SVHS, 2647 .gpiomask = 0x0, 2648 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2), 2649 .muxsel_hook = geovision_muxsel, 2650 .gpiomux = { 0 }, 2651 .no_msp34xx = 1, 2652 .pll = PLL_28, 2653 .tuner_type = TUNER_ABSENT, 2654 .tuner_addr = ADDR_UNSET, 2655 }, 2656 [BTTV_BOARD_KOZUMI_KTV_01C] = { 2657 /* Mauro Lacy <mauro@lacy.com.ar> 2658 * Based on MagicTV and Conceptronic CONTVFMi */ 2659 2660 .name = "Kozumi KTV-01C", 2661 .video_inputs = 3, 2662 /* .audio_inputs= 1, */ 2663 .svhs = 2, 2664 .gpiomask = 0x008007, 2665 .muxsel = MUXSEL(2, 3, 1, 1), 2666 .gpiomux = { 0, 1, 2, 2 }, /* CONTVFMi */ 2667 .gpiomute = 3, /* CONTVFMi */ 2668 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */ 2669 .tuner_addr = ADDR_UNSET, 2670 .pll = PLL_28, 2671 .has_radio = 1, 2672 .has_remote = 1, 2673 }, 2674 [BTTV_BOARD_ENLTV_FM_2] = { 2675 /* Encore TV Tuner Pro ENL TV-FM-2 2676 Mauro Carvalho Chehab <mchehab@kernel.org> */ 2677 .name = "Encore ENL TV-FM-2", 2678 .video_inputs = 3, 2679 /* .audio_inputs= 1, */ 2680 .svhs = 2, 2681 /* bit 6 -> IR disabled 2682 bit 18/17 = 00 -> mute 2683 01 -> enable external audio input 2684 10 -> internal audio input (mono?) 2685 11 -> internal audio input 2686 */ 2687 .gpiomask = 0x060040, 2688 .muxsel = MUXSEL(2, 3, 3), 2689 .gpiomux = { 0x60000, 0x60000, 0x20000, 0x20000 }, 2690 .gpiomute = 0, 2691 .tuner_type = TUNER_TCL_MF02GIP_5N, 2692 .tuner_addr = ADDR_UNSET, 2693 .pll = PLL_28, 2694 .has_radio = 1, 2695 .has_remote = 1, 2696 }, 2697 [BTTV_BOARD_VD012] = { 2698 /* D.Heer@Phytec.de */ 2699 .name = "PHYTEC VD-012 (bt878)", 2700 .video_inputs = 4, 2701 /* .audio_inputs= 0, */ 2702 .svhs = NO_SVHS, 2703 .gpiomask = 0x00, 2704 .muxsel = MUXSEL(0, 2, 3, 1), 2705 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 2706 .pll = PLL_28, 2707 .tuner_type = TUNER_ABSENT, 2708 .tuner_addr = ADDR_UNSET, 2709 }, 2710 [BTTV_BOARD_VD012_X1] = { 2711 /* D.Heer@Phytec.de */ 2712 .name = "PHYTEC VD-012-X1 (bt878)", 2713 .video_inputs = 4, 2714 /* .audio_inputs= 0, */ 2715 .svhs = 3, 2716 .gpiomask = 0x00, 2717 .muxsel = MUXSEL(2, 3, 1), 2718 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 2719 .pll = PLL_28, 2720 .tuner_type = TUNER_ABSENT, 2721 .tuner_addr = ADDR_UNSET, 2722 }, 2723 [BTTV_BOARD_VD012_X2] = { 2724 /* D.Heer@Phytec.de */ 2725 .name = "PHYTEC VD-012-X2 (bt878)", 2726 .video_inputs = 4, 2727 /* .audio_inputs= 0, */ 2728 .svhs = 3, 2729 .gpiomask = 0x00, 2730 .muxsel = MUXSEL(3, 2, 1), 2731 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 2732 .pll = PLL_28, 2733 .tuner_type = TUNER_ABSENT, 2734 .tuner_addr = ADDR_UNSET, 2735 }, 2736 [BTTV_BOARD_GEOVISION_GV800S] = { 2737 /* Bruno Christo <bchristo@inf.ufsm.br> 2738 * 2739 * GeoVision GV-800(S) has 4 Conexant Fusion 878A: 2740 * 1 audio input per BT878A = 4 audio inputs 2741 * 4 video inputs per BT878A = 16 video inputs 2742 * This is the first BT878A chip of the GV-800(S). It's the 2743 * "master" chip and it controls the video inputs through an 2744 * analog multiplexer (a CD22M3494) via some GPIO pins. The 2745 * slaves should use card type 0x9e (following this one). 2746 * There is a EEPROM on the card which is currently not handled. 2747 * The audio input is not working yet. 2748 */ 2749 .name = "Geovision GV-800(S) (master)", 2750 .video_inputs = 4, 2751 /* .audio_inputs= 1, */ 2752 .tuner_type = TUNER_ABSENT, 2753 .tuner_addr = ADDR_UNSET, 2754 .svhs = NO_SVHS, 2755 .gpiomask = 0xf107f, 2756 .no_gpioirq = 1, 2757 .muxsel = MUXSEL(2, 2, 2, 2), 2758 .pll = PLL_28, 2759 .no_msp34xx = 1, 2760 .no_tda7432 = 1, 2761 .muxsel_hook = gv800s_muxsel, 2762 }, 2763 [BTTV_BOARD_GEOVISION_GV800S_SL] = { 2764 /* Bruno Christo <bchristo@inf.ufsm.br> 2765 * 2766 * GeoVision GV-800(S) has 4 Conexant Fusion 878A: 2767 * 1 audio input per BT878A = 4 audio inputs 2768 * 4 video inputs per BT878A = 16 video inputs 2769 * The 3 other BT878A chips are "slave" chips of the GV-800(S) 2770 * and should use this card type. 2771 * The audio input is not working yet. 2772 */ 2773 .name = "Geovision GV-800(S) (slave)", 2774 .video_inputs = 4, 2775 /* .audio_inputs= 1, */ 2776 .tuner_type = TUNER_ABSENT, 2777 .tuner_addr = ADDR_UNSET, 2778 .svhs = NO_SVHS, 2779 .gpiomask = 0x00, 2780 .no_gpioirq = 1, 2781 .muxsel = MUXSEL(2, 2, 2, 2), 2782 .pll = PLL_28, 2783 .no_msp34xx = 1, 2784 .no_tda7432 = 1, 2785 .muxsel_hook = gv800s_muxsel, 2786 }, 2787 [BTTV_BOARD_PV183] = { 2788 .name = "ProVideo PV183", /* 0x9f */ 2789 .video_inputs = 2, 2790 /* .audio_inputs= 0, */ 2791 .svhs = NO_SVHS, 2792 .gpiomask = 0, 2793 .muxsel = MUXSEL(2, 3), 2794 .gpiomux = { 0 }, 2795 .no_msp34xx = 1, 2796 .pll = PLL_28, 2797 .tuner_type = TUNER_ABSENT, 2798 .tuner_addr = ADDR_UNSET, 2799 }, 2800 /* ---- card 0xa0---------------------------------- */ 2801 [BTTV_BOARD_TVT_TD3116] = { 2802 .name = "Tongwei Video Technology TD-3116", 2803 .video_inputs = 16, 2804 .gpiomask = 0xc00ff, 2805 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2), 2806 .muxsel_hook = td3116_muxsel, 2807 .svhs = NO_SVHS, 2808 .pll = PLL_28, 2809 .tuner_type = TUNER_ABSENT, 2810 }, 2811 [BTTV_BOARD_APOSONIC_WDVR] = { 2812 .name = "Aposonic W-DVR", 2813 .video_inputs = 4, 2814 .svhs = NO_SVHS, 2815 .muxsel = MUXSEL(2, 3, 1, 0), 2816 .tuner_type = TUNER_ABSENT, 2817 }, 2818 [BTTV_BOARD_ADLINK_MPG24] = { 2819 /* Adlink MPG24 */ 2820 .name = "Adlink MPG24", 2821 .video_inputs = 1, 2822 /* .audio_inputs= 1, */ 2823 .svhs = NO_SVHS, 2824 .muxsel = MUXSEL(2, 2, 2, 2), 2825 .tuner_type = UNSET, 2826 .tuner_addr = ADDR_UNSET, 2827 .pll = PLL_28, 2828 }, 2829 [BTTV_BOARD_BT848_CAP_14] = { 2830 .name = "Bt848 Capture 14MHz", 2831 .video_inputs = 4, 2832 .svhs = 2, 2833 .muxsel = MUXSEL(2, 3, 1, 0), 2834 .pll = PLL_14, 2835 .tuner_type = TUNER_ABSENT, 2836 }, 2837 [BTTV_BOARD_CYBERVISION_CV06] = { 2838 .name = "CyberVision CV06 (SV)", 2839 .video_inputs = 4, 2840 /* .audio_inputs= 0, */ 2841 .svhs = NO_SVHS, 2842 .muxsel = MUXSEL(2, 3, 1, 0), 2843 .pll = PLL_28, 2844 .tuner_type = TUNER_ABSENT, 2845 .tuner_addr = ADDR_UNSET, 2846 }, 2847 [BTTV_BOARD_KWORLD_VSTREAM_XPERT] = { 2848 /* Pojar George <geoubuntu@gmail.com> */ 2849 .name = "Kworld V-Stream Xpert TV PVR878", 2850 .video_inputs = 3, 2851 /* .audio_inputs= 1, */ 2852 .svhs = 2, 2853 .gpiomask = 0x001c0007, 2854 .muxsel = MUXSEL(2, 3, 1, 1), 2855 .gpiomux = { 0, 1, 2, 2 }, 2856 .gpiomute = 3, 2857 .pll = PLL_28, 2858 .tuner_type = TUNER_TENA_9533_DI, 2859 .tuner_addr = ADDR_UNSET, 2860 .has_remote = 1, 2861 .has_radio = 1, 2862 }, 2863 /* ---- card 0xa6---------------------------------- */ 2864 [BTTV_BOARD_PCI_8604PW] = { 2865 /* PCI-8604PW with special unlock sequence */ 2866 .name = "PCI-8604PW", 2867 .video_inputs = 2, 2868 /* .audio_inputs= 0, */ 2869 .svhs = NO_SVHS, 2870 /* The second input is available on CN4, if populated. 2871 * The other 5x2 header (CN2?) connects to the same inputs 2872 * as the on-board BNCs */ 2873 .muxsel = MUXSEL(2, 3), 2874 .tuner_type = TUNER_ABSENT, 2875 .no_msp34xx = 1, 2876 .no_tda7432 = 1, 2877 .pll = PLL_35, 2878 }, 2879}; 2880 2881static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards); 2882 2883/* ----------------------------------------------------------------------- */ 2884 2885static unsigned char eeprom_data[256]; 2886 2887/* 2888 * identify card 2889 */ 2890void bttv_idcard(struct bttv *btv) 2891{ 2892 unsigned int gpiobits; 2893 int i,type; 2894 2895 /* read PCI subsystem ID */ 2896 btv->cardid = btv->c.pci->subsystem_device << 16; 2897 btv->cardid |= btv->c.pci->subsystem_vendor; 2898 2899 if (0 != btv->cardid && 0xffffffff != btv->cardid) { 2900 /* look for the card */ 2901 for (type = -1, i = 0; cards[i].id != 0; i++) 2902 if (cards[i].id == btv->cardid) 2903 type = i; 2904 2905 if (type != -1) { 2906 /* found it */ 2907 pr_info("%d: detected: %s [card=%d], PCI subsystem ID is %04x:%04x\n", 2908 btv->c.nr, cards[type].name, cards[type].cardnr, 2909 btv->cardid & 0xffff, 2910 (btv->cardid >> 16) & 0xffff); 2911 btv->c.type = cards[type].cardnr; 2912 } else { 2913 /* 404 */ 2914 pr_info("%d: subsystem: %04x:%04x (UNKNOWN)\n", 2915 btv->c.nr, btv->cardid & 0xffff, 2916 (btv->cardid >> 16) & 0xffff); 2917 pr_debug("please mail id, board name and the correct card= insmod option to linux-media@vger.kernel.org\n"); 2918 } 2919 } 2920 2921 /* let the user override the autodetected type */ 2922 if (card[btv->c.nr] < bttv_num_tvcards) 2923 btv->c.type=card[btv->c.nr]; 2924 2925 /* print which card config we are using */ 2926 pr_info("%d: using: %s [card=%d,%s]\n", 2927 btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type, 2928 card[btv->c.nr] < bttv_num_tvcards 2929 ? "insmod option" : "autodetected"); 2930 2931 /* overwrite gpio stuff ?? */ 2932 if (UNSET == audioall && UNSET == audiomux[0]) 2933 return; 2934 2935 if (UNSET != audiomux[0]) { 2936 gpiobits = 0; 2937 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) { 2938 bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i]; 2939 gpiobits |= audiomux[i]; 2940 } 2941 } else { 2942 gpiobits = audioall; 2943 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) { 2944 bttv_tvcards[btv->c.type].gpiomux[i] = audioall; 2945 } 2946 } 2947 bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits; 2948 pr_info("%d: gpio config override: mask=0x%x, mux=", 2949 btv->c.nr, bttv_tvcards[btv->c.type].gpiomask); 2950 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) { 2951 pr_cont("%s0x%x", 2952 i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]); 2953 } 2954 pr_cont("\n"); 2955} 2956 2957/* 2958 * (most) board specific initialisations goes here 2959 */ 2960 2961/* Some Modular Technology cards have an eeprom, but no subsystem ID */ 2962static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256]) 2963{ 2964 int type = -1; 2965 2966 if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13)) 2967 type = BTTV_BOARD_MODTEC_205; 2968 else if (0 == strncmp(eeprom_data+20,"Picolo",7)) 2969 type = BTTV_BOARD_EURESYS_PICOLO; 2970 else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0) 2971 type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */ 2972 2973 if (-1 != type) { 2974 btv->c.type = type; 2975 pr_info("%d: detected by eeprom: %s [card=%d]\n", 2976 btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type); 2977 } 2978} 2979 2980static void flyvideo_gpio(struct bttv *btv) 2981{ 2982 int gpio, has_remote, has_radio, is_capture_only; 2983 int is_lr90, has_tda9820_tda9821; 2984 int tuner_type = UNSET, ttype; 2985 2986 gpio_inout(0xffffff, 0); 2987 udelay(8); /* without this we would see the 0x1800 mask */ 2988 gpio = gpio_read(); 2989 /* FIXME: must restore OUR_EN ??? */ 2990 2991 /* all cards provide GPIO info, some have an additional eeprom 2992 * LR50: GPIO coding can be found lower right CP1 .. CP9 2993 * CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1. 2994 * GPIO14-12: n.c. 2995 * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878) 2996 2997 * lowest 3 bytes are remote control codes (no handshake needed) 2998 * xxxFFF: No remote control chip soldered 2999 * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered 3000 * Note: Some bits are Audio_Mask ! 3001 */ 3002 ttype = (gpio & 0x0f0000) >> 16; 3003 switch (ttype) { 3004 case 0x0: 3005 tuner_type = 2; /* NTSC, e.g. TPI8NSR11P */ 3006 break; 3007 case 0x2: 3008 tuner_type = 39; /* LG NTSC (newer TAPC series) TAPC-H701P */ 3009 break; 3010 case 0x4: 3011 tuner_type = 5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */ 3012 break; 3013 case 0x6: 3014 tuner_type = 37; /* LG PAL (newer TAPC series) TAPC-G702P */ 3015 break; 3016 case 0xC: 3017 tuner_type = 3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */ 3018 break; 3019 default: 3020 pr_info("%d: FlyVideo_gpio: unknown tuner type\n", btv->c.nr); 3021 break; 3022 } 3023 3024 has_remote = gpio & 0x800000; 3025 has_radio = gpio & 0x400000; 3026 /* unknown 0x200000; 3027 * unknown2 0x100000; */ 3028 is_capture_only = !(gpio & 0x008000); /* GPIO15 */ 3029 has_tda9820_tda9821 = !(gpio & 0x004000); 3030 is_lr90 = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */ 3031 /* 3032 * gpio & 0x001000 output bit for audio routing */ 3033 3034 if (is_capture_only) 3035 tuner_type = TUNER_ABSENT; /* No tuner present */ 3036 3037 pr_info("%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n", 3038 btv->c.nr, has_radio ? "yes" : "no", 3039 has_remote ? "yes" : "no", tuner_type, gpio); 3040 pr_info("%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n", 3041 btv->c.nr, is_lr90 ? "yes" : "no", 3042 has_tda9820_tda9821 ? "yes" : "no", 3043 is_capture_only ? "yes" : "no"); 3044 3045 if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */ 3046 btv->tuner_type = tuner_type; 3047 btv->has_radio = has_radio; 3048 3049 /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80 3050 * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00 3051 * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */ 3052 if (has_tda9820_tda9821) 3053 btv->audio_mode_gpio = lt9415_audio; 3054 /* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */ 3055} 3056 3057static int miro_tunermap[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1, 3058 14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 }; 3059static int miro_fmtuner[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1, 3060 1,1,1,1, 1,1,1,0, 0,0,0,0, 0,1,0,0 }; 3061 3062static void miro_pinnacle_gpio(struct bttv *btv) 3063{ 3064 int id,msp,gpio; 3065 char *info; 3066 3067 gpio_inout(0xffffff, 0); 3068 gpio = gpio_read(); 3069 id = ((gpio>>10) & 63) -1; 3070 msp = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx"); 3071 if (id < 32) { 3072 btv->tuner_type = miro_tunermap[id]; 3073 if (0 == (gpio & 0x20)) { 3074 btv->has_radio = 1; 3075 if (!miro_fmtuner[id]) { 3076 btv->has_tea575x = 1; 3077 btv->tea_gpio.wren = 6; 3078 btv->tea_gpio.most = 7; 3079 btv->tea_gpio.clk = 8; 3080 btv->tea_gpio.data = 9; 3081 tea575x_init(btv); 3082 } 3083 } else { 3084 btv->has_radio = 0; 3085 } 3086 if (-1 != msp) { 3087 if (btv->c.type == BTTV_BOARD_MIRO) 3088 btv->c.type = BTTV_BOARD_MIROPRO; 3089 if (btv->c.type == BTTV_BOARD_PINNACLE) 3090 btv->c.type = BTTV_BOARD_PINNACLEPRO; 3091 } 3092 pr_info("%d: miro: id=%d tuner=%d radio=%s stereo=%s\n", 3093 btv->c.nr, id+1, btv->tuner_type, 3094 !btv->has_radio ? "no" : 3095 (btv->has_tea575x ? "tea575x" : "fmtuner"), 3096 (-1 == msp) ? "no" : "yes"); 3097 } else { 3098 /* new cards with microtune tuner */ 3099 id = 63 - id; 3100 btv->has_radio = 0; 3101 switch (id) { 3102 case 1: 3103 info = "PAL / mono"; 3104 btv->tda9887_conf = TDA9887_INTERCARRIER; 3105 break; 3106 case 2: 3107 info = "PAL+SECAM / stereo"; 3108 btv->has_radio = 1; 3109 btv->tda9887_conf = TDA9887_QSS; 3110 break; 3111 case 3: 3112 info = "NTSC / stereo"; 3113 btv->has_radio = 1; 3114 btv->tda9887_conf = TDA9887_QSS; 3115 break; 3116 case 4: 3117 info = "PAL+SECAM / mono"; 3118 btv->tda9887_conf = TDA9887_QSS; 3119 break; 3120 case 5: 3121 info = "NTSC / mono"; 3122 btv->tda9887_conf = TDA9887_INTERCARRIER; 3123 break; 3124 case 6: 3125 info = "NTSC / stereo"; 3126 btv->tda9887_conf = TDA9887_INTERCARRIER; 3127 break; 3128 case 7: 3129 info = "PAL / stereo"; 3130 btv->tda9887_conf = TDA9887_INTERCARRIER; 3131 break; 3132 default: 3133 info = "oops: unknown card"; 3134 break; 3135 } 3136 if (-1 != msp) 3137 btv->c.type = BTTV_BOARD_PINNACLEPRO; 3138 pr_info("%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n", 3139 btv->c.nr, id, info, btv->has_radio ? "yes" : "no"); 3140 btv->tuner_type = TUNER_MT2032; 3141 } 3142} 3143 3144/* GPIO21 L: Buffer aktiv, H: Buffer inaktiv */ 3145#define LM1882_SYNC_DRIVE 0x200000L 3146 3147static void init_ids_eagle(struct bttv *btv) 3148{ 3149 gpio_inout(0xffffff,0xFFFF37); 3150 gpio_write(0x200020); 3151 3152 /* flash strobe inverter ?! */ 3153 gpio_write(0x200024); 3154 3155 /* switch sync drive off */ 3156 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE); 3157 3158 /* set BT848 muxel to 2 */ 3159 btaor((2)<<5, ~(2<<5), BT848_IFORM); 3160} 3161 3162/* Muxsel helper for the IDS Eagle. 3163 * the eagles does not use the standard muxsel-bits but 3164 * has its own multiplexer */ 3165static void eagle_muxsel(struct bttv *btv, unsigned int input) 3166{ 3167 gpio_bits(3, input & 3); 3168 3169 /* composite */ 3170 /* set chroma ADC to sleep */ 3171 btor(BT848_ADC_C_SLEEP, BT848_ADC); 3172 /* set to composite video */ 3173 btand(~BT848_CONTROL_COMP, BT848_E_CONTROL); 3174 btand(~BT848_CONTROL_COMP, BT848_O_CONTROL); 3175 3176 /* switch sync drive off */ 3177 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE); 3178} 3179 3180static void gvc1100_muxsel(struct bttv *btv, unsigned int input) 3181{ 3182 static const int masks[] = {0x30, 0x01, 0x12, 0x23}; 3183 gpio_write(masks[input%4]); 3184} 3185 3186/* LMLBT4x initialization - to allow access to GPIO bits for sensors input and 3187 alarms output 3188 3189 GPIObit | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | 3190 assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1| | | 3191 3192 IN - sensor inputs, INx - sensor inputs and TI XORed together 3193 O1,O2,O3 - alarm outputs (relays) 3194 3195 OUT ENABLE 1 1 0 . 1 1 0 0 . 0 0 0 0 = 0x6C0 3196 3197*/ 3198 3199static void init_lmlbt4x(struct bttv *btv) 3200{ 3201 pr_debug("LMLBT4x init\n"); 3202 btwrite(0x000000, BT848_GPIO_REG_INP); 3203 gpio_inout(0xffffff, 0x0006C0); 3204 gpio_write(0x000000); 3205} 3206 3207static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input) 3208{ 3209 unsigned int inmux = input % 8; 3210 gpio_inout( 0xf, 0xf ); 3211 gpio_bits( 0xf, inmux ); 3212} 3213 3214static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input) 3215{ 3216 unsigned int inmux = input % 4; 3217 gpio_inout( 3<<9, 3<<9 ); 3218 gpio_bits( 3<<9, inmux<<9 ); 3219} 3220 3221static void geovision_muxsel(struct bttv *btv, unsigned int input) 3222{ 3223 unsigned int inmux = input % 16; 3224 gpio_inout(0xf, 0xf); 3225 gpio_bits(0xf, inmux); 3226} 3227 3228/* 3229 * The TD3116 has 2 74HC4051 muxes wired to the MUX0 input of a bt878. 3230 * The first 74HC4051 has the lower 8 inputs, the second one the higher 8. 3231 * The muxes are controlled via a 74HC373 latch which is connected to 3232 * GPIOs 0-7. GPIO 18 is connected to the LE signal of the latch. 3233 * Q0 of the latch is connected to the Enable (~E) input of the first 3234 * 74HC4051. Q1 - Q3 are connected to S0 - S2 of the same 74HC4051. 3235 * Q4 - Q7 are connected to the second 74HC4051 in the same way. 3236 */ 3237 3238static void td3116_latch_value(struct bttv *btv, u32 value) 3239{ 3240 gpio_bits((1<<18) | 0xff, value); 3241 gpio_bits((1<<18) | 0xff, (1<<18) | value); 3242 udelay(1); 3243 gpio_bits((1<<18) | 0xff, value); 3244} 3245 3246static void td3116_muxsel(struct bttv *btv, unsigned int input) 3247{ 3248 u32 value; 3249 u32 highbit; 3250 3251 highbit = (input & 0x8) >> 3 ; 3252 3253 /* Disable outputs and set value in the mux */ 3254 value = 0x11; /* Disable outputs */ 3255 value |= ((input & 0x7) << 1) << (4 * highbit); 3256 td3116_latch_value(btv, value); 3257 3258 /* Enable the correct output */ 3259 value &= ~0x11; 3260 value |= ((highbit ^ 0x1) << 4) | highbit; 3261 td3116_latch_value(btv, value); 3262} 3263 3264/* ----------------------------------------------------------------------- */ 3265 3266static void bttv_reset_audio(struct bttv *btv) 3267{ 3268 /* 3269 * BT878A has a audio-reset register. 3270 * 1. This register is an audio reset function but it is in 3271 * function-0 (video capture) address space. 3272 * 2. It is enough to do this once per power-up of the card. 3273 * 3. There is a typo in the Conexant doc -- it is not at 3274 * 0x5B, but at 0x058. (B is an odd-number, obviously a typo!). 3275 * --//Shrikumar 030609 3276 */ 3277 if (btv->id != 878) 3278 return; 3279 3280 if (bttv_debug) 3281 pr_debug("%d: BT878A ARESET\n", btv->c.nr); 3282 btwrite((1<<7), 0x058); 3283 udelay(10); 3284 btwrite( 0, 0x058); 3285} 3286 3287/* initialization part one -- before registering i2c bus */ 3288void bttv_init_card1(struct bttv *btv) 3289{ 3290 switch (btv->c.type) { 3291 case BTTV_BOARD_HAUPPAUGE: 3292 case BTTV_BOARD_HAUPPAUGE878: 3293 boot_msp34xx(btv,5); 3294 break; 3295 case BTTV_BOARD_VOODOOTV_200: 3296 case BTTV_BOARD_VOODOOTV_FM: 3297 boot_msp34xx(btv,20); 3298 break; 3299 case BTTV_BOARD_AVERMEDIA98: 3300 boot_msp34xx(btv,11); 3301 break; 3302 case BTTV_BOARD_HAUPPAUGEPVR: 3303 pvr_boot(btv); 3304 break; 3305 case BTTV_BOARD_TWINHAN_DST: 3306 case BTTV_BOARD_AVDVBT_771: 3307 case BTTV_BOARD_PINNACLESAT: 3308 btv->use_i2c_hw = 1; 3309 break; 3310 case BTTV_BOARD_ADLINK_RTV24: 3311 init_RTV24( btv ); 3312 break; 3313 case BTTV_BOARD_PCI_8604PW: 3314 init_PCI8604PW(btv); 3315 break; 3316 3317 } 3318 if (!bttv_tvcards[btv->c.type].has_dvb) 3319 bttv_reset_audio(btv); 3320} 3321 3322/* initialization part two -- after registering i2c bus */ 3323void bttv_init_card2(struct bttv *btv) 3324{ 3325 btv->tuner_type = UNSET; 3326 3327 if (BTTV_BOARD_UNKNOWN == btv->c.type) { 3328 bttv_readee(btv,eeprom_data,0xa0); 3329 identify_by_eeprom(btv,eeprom_data); 3330 } 3331 3332 switch (btv->c.type) { 3333 case BTTV_BOARD_MIRO: 3334 case BTTV_BOARD_MIROPRO: 3335 case BTTV_BOARD_PINNACLE: 3336 case BTTV_BOARD_PINNACLEPRO: 3337 /* miro/pinnacle */ 3338 miro_pinnacle_gpio(btv); 3339 break; 3340 case BTTV_BOARD_FLYVIDEO_98: 3341 case BTTV_BOARD_MAXI: 3342 case BTTV_BOARD_LIFE_FLYKIT: 3343 case BTTV_BOARD_FLYVIDEO: 3344 case BTTV_BOARD_TYPHOON_TVIEW: 3345 case BTTV_BOARD_CHRONOS_VS2: 3346 case BTTV_BOARD_FLYVIDEO_98FM: 3347 case BTTV_BOARD_FLYVIDEO2000: 3348 case BTTV_BOARD_FLYVIDEO98EZ: 3349 case BTTV_BOARD_CONFERENCETV: 3350 case BTTV_BOARD_LIFETEC_9415: 3351 flyvideo_gpio(btv); 3352 break; 3353 case BTTV_BOARD_HAUPPAUGE: 3354 case BTTV_BOARD_HAUPPAUGE878: 3355 case BTTV_BOARD_HAUPPAUGEPVR: 3356 /* pick up some config infos from the eeprom */ 3357 bttv_readee(btv,eeprom_data,0xa0); 3358 hauppauge_eeprom(btv); 3359 break; 3360 case BTTV_BOARD_AVERMEDIA98: 3361 case BTTV_BOARD_AVPHONE98: 3362 bttv_readee(btv,eeprom_data,0xa0); 3363 avermedia_eeprom(btv); 3364 break; 3365 case BTTV_BOARD_PXC200: 3366 init_PXC200(btv); 3367 break; 3368 case BTTV_BOARD_PICOLO_TETRA_CHIP: 3369 picolo_tetra_init(btv); 3370 break; 3371 case BTTV_BOARD_VHX: 3372 btv->has_radio = 1; 3373 btv->has_tea575x = 1; 3374 btv->tea_gpio.wren = 5; 3375 btv->tea_gpio.most = 6; 3376 btv->tea_gpio.clk = 3; 3377 btv->tea_gpio.data = 4; 3378 tea575x_init(btv); 3379 break; 3380 case BTTV_BOARD_VOBIS_BOOSTAR: 3381 case BTTV_BOARD_TERRATV: 3382 terratec_active_radio_upgrade(btv); 3383 break; 3384 case BTTV_BOARD_MAGICTVIEW061: 3385 if (btv->cardid == 0x3002144f) { 3386 btv->has_radio=1; 3387 pr_info("%d: radio detected by subsystem id (CPH05x)\n", 3388 btv->c.nr); 3389 } 3390 break; 3391 case BTTV_BOARD_STB2: 3392 if (btv->cardid == 0x3060121a) { 3393 /* Fix up entry for 3DFX VoodooTV 100, 3394 which is an OEM STB card variant. */ 3395 btv->has_radio=0; 3396 btv->tuner_type=TUNER_TEMIC_NTSC; 3397 } 3398 break; 3399 case BTTV_BOARD_OSPREY1x0: 3400 case BTTV_BOARD_OSPREY1x0_848: 3401 case BTTV_BOARD_OSPREY101_848: 3402 case BTTV_BOARD_OSPREY1x1: 3403 case BTTV_BOARD_OSPREY1x1_SVID: 3404 case BTTV_BOARD_OSPREY2xx: 3405 case BTTV_BOARD_OSPREY2x0_SVID: 3406 case BTTV_BOARD_OSPREY2x0: 3407 case BTTV_BOARD_OSPREY440: 3408 case BTTV_BOARD_OSPREY500: 3409 case BTTV_BOARD_OSPREY540: 3410 case BTTV_BOARD_OSPREY2000: 3411 bttv_readee(btv,eeprom_data,0xa0); 3412 osprey_eeprom(btv, eeprom_data); 3413 break; 3414 case BTTV_BOARD_IDS_EAGLE: 3415 init_ids_eagle(btv); 3416 break; 3417 case BTTV_BOARD_MODTEC_205: 3418 bttv_readee(btv,eeprom_data,0xa0); 3419 modtec_eeprom(btv); 3420 break; 3421 case BTTV_BOARD_LMLBT4: 3422 init_lmlbt4x(btv); 3423 break; 3424 case BTTV_BOARD_TIBET_CS16: 3425 tibetCS16_init(btv); 3426 break; 3427 case BTTV_BOARD_KODICOM_4400R: 3428 kodicom4400r_init(btv); 3429 break; 3430 case BTTV_BOARD_GEOVISION_GV800S: 3431 gv800s_init(btv); 3432 break; 3433 } 3434 3435 /* pll configuration */ 3436 if (!(btv->id==848 && btv->revision==0x11)) { 3437 /* defaults from card list */ 3438 if (PLL_28 == bttv_tvcards[btv->c.type].pll) { 3439 btv->pll.pll_ifreq=28636363; 3440 btv->pll.pll_crystal=BT848_IFORM_XT0; 3441 } 3442 if (PLL_35 == bttv_tvcards[btv->c.type].pll) { 3443 btv->pll.pll_ifreq=35468950; 3444 btv->pll.pll_crystal=BT848_IFORM_XT1; 3445 } 3446 if (PLL_14 == bttv_tvcards[btv->c.type].pll) { 3447 btv->pll.pll_ifreq = 14318181; 3448 btv->pll.pll_crystal = BT848_IFORM_XT0; 3449 } 3450 /* insmod options can override */ 3451 switch (pll[btv->c.nr]) { 3452 case 0: /* none */ 3453 btv->pll.pll_crystal = 0; 3454 btv->pll.pll_ifreq = 0; 3455 btv->pll.pll_ofreq = 0; 3456 break; 3457 case 1: /* 28 MHz */ 3458 case 28: 3459 btv->pll.pll_ifreq = 28636363; 3460 btv->pll.pll_ofreq = 0; 3461 btv->pll.pll_crystal = BT848_IFORM_XT0; 3462 break; 3463 case 2: /* 35 MHz */ 3464 case 35: 3465 btv->pll.pll_ifreq = 35468950; 3466 btv->pll.pll_ofreq = 0; 3467 btv->pll.pll_crystal = BT848_IFORM_XT1; 3468 break; 3469 case 3: /* 14 MHz */ 3470 case 14: 3471 btv->pll.pll_ifreq = 14318181; 3472 btv->pll.pll_ofreq = 0; 3473 btv->pll.pll_crystal = BT848_IFORM_XT0; 3474 break; 3475 } 3476 } 3477 btv->pll.pll_current = -1; 3478 3479 /* tuner configuration (from card list / autodetect / insmod option) */ 3480 if (UNSET != bttv_tvcards[btv->c.type].tuner_type) 3481 if (UNSET == btv->tuner_type) 3482 btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type; 3483 if (UNSET != tuner[btv->c.nr]) 3484 btv->tuner_type = tuner[btv->c.nr]; 3485 3486 if (btv->tuner_type == TUNER_ABSENT) 3487 pr_info("%d: tuner absent\n", btv->c.nr); 3488 else if (btv->tuner_type == UNSET) 3489 pr_warn("%d: tuner type unset\n", btv->c.nr); 3490 else 3491 pr_info("%d: tuner type=%d\n", btv->c.nr, btv->tuner_type); 3492 3493 if (autoload != UNSET) { 3494 pr_warn("%d: the autoload option is obsolete\n", btv->c.nr); 3495 pr_warn("%d: use option msp3400, tda7432 or tvaudio to override which audio module should be used\n", 3496 btv->c.nr); 3497 } 3498 3499 if (UNSET == btv->tuner_type) 3500 btv->tuner_type = TUNER_ABSENT; 3501 3502 btv->dig = bttv_tvcards[btv->c.type].has_dig_in ? 3503 bttv_tvcards[btv->c.type].video_inputs - 1 : UNSET; 3504 btv->svhs = bttv_tvcards[btv->c.type].svhs == NO_SVHS ? 3505 UNSET : bttv_tvcards[btv->c.type].svhs; 3506 if (svhs[btv->c.nr] != UNSET) 3507 btv->svhs = svhs[btv->c.nr]; 3508 if (remote[btv->c.nr] != UNSET) 3509 btv->has_remote = remote[btv->c.nr]; 3510 3511 if (bttv_tvcards[btv->c.type].has_radio) 3512 btv->has_radio = 1; 3513 if (bttv_tvcards[btv->c.type].has_remote) 3514 btv->has_remote = 1; 3515 if (!bttv_tvcards[btv->c.type].no_gpioirq) 3516 btv->gpioirq = 1; 3517 if (bttv_tvcards[btv->c.type].volume_gpio) 3518 btv->volume_gpio = bttv_tvcards[btv->c.type].volume_gpio; 3519 if (bttv_tvcards[btv->c.type].audio_mode_gpio) 3520 btv->audio_mode_gpio = bttv_tvcards[btv->c.type].audio_mode_gpio; 3521 3522 if (btv->tuner_type == TUNER_ABSENT) 3523 return; /* no tuner or related drivers to load */ 3524 3525 if (btv->has_saa6588 || saa6588[btv->c.nr]) { 3526 /* Probe for RDS receiver chip */ 3527 static const unsigned short addrs[] = { 3528 0x20 >> 1, 3529 0x22 >> 1, 3530 I2C_CLIENT_END 3531 }; 3532 struct v4l2_subdev *sd; 3533 3534 sd = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3535 &btv->c.i2c_adap, "saa6588", 0, addrs); 3536 btv->has_saa6588 = (sd != NULL); 3537 } 3538 3539 /* try to detect audio/fader chips */ 3540 3541 /* First check if the user specified the audio chip via a module 3542 option. */ 3543 3544 switch (audiodev[btv->c.nr]) { 3545 case -1: 3546 return; /* do not load any audio module */ 3547 3548 case 0: /* autodetect */ 3549 break; 3550 3551 case 1: { 3552 /* The user specified that we should probe for msp3400 */ 3553 static const unsigned short addrs[] = { 3554 I2C_ADDR_MSP3400 >> 1, 3555 I2C_ADDR_MSP3400_ALT >> 1, 3556 I2C_CLIENT_END 3557 }; 3558 3559 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3560 &btv->c.i2c_adap, "msp3400", 0, addrs); 3561 if (btv->sd_msp34xx) 3562 return; 3563 goto no_audio; 3564 } 3565 3566 case 2: { 3567 /* The user specified that we should probe for tda7432 */ 3568 static const unsigned short addrs[] = { 3569 I2C_ADDR_TDA7432 >> 1, 3570 I2C_CLIENT_END 3571 }; 3572 3573 if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3574 &btv->c.i2c_adap, "tda7432", 0, addrs)) 3575 return; 3576 goto no_audio; 3577 } 3578 3579 case 3: { 3580 /* The user specified that we should probe for tvaudio */ 3581 btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3582 &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs()); 3583 if (btv->sd_tvaudio) 3584 return; 3585 goto no_audio; 3586 } 3587 3588 default: 3589 pr_warn("%d: unknown audiodev value!\n", btv->c.nr); 3590 return; 3591 } 3592 3593 /* There were no overrides, so now we try to discover this through the 3594 card definition */ 3595 3596 /* probe for msp3400 first: this driver can detect whether or not 3597 it really is a msp3400, so it will return NULL when the device 3598 found is really something else (e.g. a tea6300). */ 3599 if (!bttv_tvcards[btv->c.type].no_msp34xx) { 3600 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3601 &btv->c.i2c_adap, "msp3400", 3602 0, I2C_ADDRS(I2C_ADDR_MSP3400 >> 1)); 3603 } else if (bttv_tvcards[btv->c.type].msp34xx_alt) { 3604 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3605 &btv->c.i2c_adap, "msp3400", 3606 0, I2C_ADDRS(I2C_ADDR_MSP3400_ALT >> 1)); 3607 } 3608 3609 /* If we found a msp34xx, then we're done. */ 3610 if (btv->sd_msp34xx) 3611 return; 3612 3613 /* Now see if we can find one of the tvaudio devices. */ 3614 btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3615 &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs()); 3616 if (btv->sd_tvaudio) { 3617 /* There may be two tvaudio chips on the card, so try to 3618 find another. */ 3619 v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3620 &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs()); 3621 } 3622 3623 /* it might also be a tda7432. */ 3624 if (!bttv_tvcards[btv->c.type].no_tda7432) { 3625 static const unsigned short addrs[] = { 3626 I2C_ADDR_TDA7432 >> 1, 3627 I2C_CLIENT_END 3628 }; 3629 3630 btv->sd_tda7432 = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3631 &btv->c.i2c_adap, "tda7432", 0, addrs); 3632 if (btv->sd_tda7432) 3633 return; 3634 } 3635 if (btv->sd_tvaudio) 3636 return; 3637 3638no_audio: 3639 pr_warn("%d: audio absent, no audio device found!\n", btv->c.nr); 3640} 3641 3642 3643/* initialize the tuner */ 3644void bttv_init_tuner(struct bttv *btv) 3645{ 3646 int addr = ADDR_UNSET; 3647 3648 if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr) 3649 addr = bttv_tvcards[btv->c.type].tuner_addr; 3650 3651 if (btv->tuner_type != TUNER_ABSENT) { 3652 struct tuner_setup tun_setup; 3653 3654 /* Load tuner module before issuing tuner config call! */ 3655 if (btv->has_radio) 3656 v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3657 &btv->c.i2c_adap, "tuner", 3658 0, v4l2_i2c_tuner_addrs(ADDRS_RADIO)); 3659 v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3660 &btv->c.i2c_adap, "tuner", 3661 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD)); 3662 v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3663 &btv->c.i2c_adap, "tuner", 3664 0, v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD)); 3665 3666 tun_setup.mode_mask = T_ANALOG_TV; 3667 tun_setup.type = btv->tuner_type; 3668 tun_setup.addr = addr; 3669 3670 if (btv->has_radio) 3671 tun_setup.mode_mask |= T_RADIO; 3672 3673 bttv_call_all(btv, tuner, s_type_addr, &tun_setup); 3674 } 3675 3676 if (btv->tda9887_conf) { 3677 struct v4l2_priv_tun_config tda9887_cfg; 3678 3679 tda9887_cfg.tuner = TUNER_TDA9887; 3680 tda9887_cfg.priv = &btv->tda9887_conf; 3681 3682 bttv_call_all(btv, tuner, s_config, &tda9887_cfg); 3683 } 3684} 3685 3686/* ----------------------------------------------------------------------- */ 3687 3688static void modtec_eeprom(struct bttv *btv) 3689{ 3690 if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) { 3691 btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I; 3692 pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n", 3693 btv->c.nr, &eeprom_data[0x1e]); 3694 } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) { 3695 btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I; 3696 pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n", 3697 btv->c.nr, &eeprom_data[0x1e]); 3698 } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) { 3699 btv->tuner_type=TUNER_PHILIPS_NTSC; 3700 pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n", 3701 btv->c.nr, &eeprom_data[0x1e]); 3702 } else { 3703 pr_info("%d: Modtec: Unknown TunerString: %s\n", 3704 btv->c.nr, &eeprom_data[0x1e]); 3705 } 3706} 3707 3708static void hauppauge_eeprom(struct bttv *btv) 3709{ 3710 struct tveeprom tv; 3711 3712 tveeprom_hauppauge_analog(&tv, eeprom_data); 3713 btv->tuner_type = tv.tuner_type; 3714 btv->has_radio = tv.has_radio; 3715 3716 pr_info("%d: Hauppauge eeprom indicates model#%d\n", 3717 btv->c.nr, tv.model); 3718 3719 /* 3720 * Some of the 878 boards have duplicate PCI IDs. Switch the board 3721 * type based on model #. 3722 */ 3723 if(tv.model == 64900) { 3724 pr_info("%d: Switching board type from %s to %s\n", 3725 btv->c.nr, 3726 bttv_tvcards[btv->c.type].name, 3727 bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name); 3728 btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB; 3729 } 3730 3731 /* The 61334 needs the msp3410 to do the radio demod to get sound */ 3732 if (tv.model == 61334) 3733 btv->radio_uses_msp_demodulator = 1; 3734} 3735 3736/* ----------------------------------------------------------------------- */ 3737 3738static void bttv_tea575x_set_pins(struct snd_tea575x *tea, u8 pins) 3739{ 3740 struct bttv *btv = tea->private_data; 3741 struct bttv_tea575x_gpio gpio = btv->tea_gpio; 3742 u16 val = 0; 3743 3744 val |= (pins & TEA575X_DATA) ? (1 << gpio.data) : 0; 3745 val |= (pins & TEA575X_CLK) ? (1 << gpio.clk) : 0; 3746 val |= (pins & TEA575X_WREN) ? (1 << gpio.wren) : 0; 3747 3748 gpio_bits((1 << gpio.data) | (1 << gpio.clk) | (1 << gpio.wren), val); 3749 if (btv->mbox_ior) { 3750 /* IOW and CSEL active */ 3751 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0); 3752 udelay(5); 3753 /* all inactive */ 3754 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel, 3755 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel); 3756 } 3757} 3758 3759static u8 bttv_tea575x_get_pins(struct snd_tea575x *tea) 3760{ 3761 struct bttv *btv = tea->private_data; 3762 struct bttv_tea575x_gpio gpio = btv->tea_gpio; 3763 u8 ret = 0; 3764 u16 val; 3765 3766 if (btv->mbox_ior) { 3767 /* IOR and CSEL active */ 3768 gpio_bits(btv->mbox_ior | btv->mbox_csel, 0); 3769 udelay(5); 3770 } 3771 val = gpio_read(); 3772 if (btv->mbox_ior) { 3773 /* all inactive */ 3774 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel, 3775 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel); 3776 } 3777 3778 if (val & (1 << gpio.data)) 3779 ret |= TEA575X_DATA; 3780 if (val & (1 << gpio.most)) 3781 ret |= TEA575X_MOST; 3782 3783 return ret; 3784} 3785 3786static void bttv_tea575x_set_direction(struct snd_tea575x *tea, bool output) 3787{ 3788 struct bttv *btv = tea->private_data; 3789 struct bttv_tea575x_gpio gpio = btv->tea_gpio; 3790 u32 mask = (1 << gpio.clk) | (1 << gpio.wren) | (1 << gpio.data) | 3791 (1 << gpio.most); 3792 3793 if (output) 3794 gpio_inout(mask, (1 << gpio.data) | (1 << gpio.clk) | 3795 (1 << gpio.wren)); 3796 else 3797 gpio_inout(mask, (1 << gpio.clk) | (1 << gpio.wren)); 3798} 3799 3800static const struct snd_tea575x_ops bttv_tea_ops = { 3801 .set_pins = bttv_tea575x_set_pins, 3802 .get_pins = bttv_tea575x_get_pins, 3803 .set_direction = bttv_tea575x_set_direction, 3804}; 3805 3806static int tea575x_init(struct bttv *btv) 3807{ 3808 btv->tea.private_data = btv; 3809 btv->tea.ops = &bttv_tea_ops; 3810 if (!snd_tea575x_hw_init(&btv->tea)) { 3811 pr_info("%d: detected TEA575x radio\n", btv->c.nr); 3812 btv->tea.mute = false; 3813 return 0; 3814 } 3815 3816 btv->has_tea575x = 0; 3817 btv->has_radio = 0; 3818 3819 return -ENODEV; 3820} 3821 3822/* ----------------------------------------------------------------------- */ 3823 3824static int terratec_active_radio_upgrade(struct bttv *btv) 3825{ 3826 btv->has_radio = 1; 3827 btv->has_tea575x = 1; 3828 btv->tea_gpio.wren = 4; 3829 btv->tea_gpio.most = 5; 3830 btv->tea_gpio.clk = 3; 3831 btv->tea_gpio.data = 2; 3832 3833 btv->mbox_iow = 1 << 8; 3834 btv->mbox_ior = 1 << 9; 3835 btv->mbox_csel = 1 << 10; 3836 3837 if (!tea575x_init(btv)) { 3838 pr_info("%d: Terratec Active Radio Upgrade found\n", btv->c.nr); 3839 btv->has_saa6588 = 1; 3840 } 3841 3842 return 0; 3843} 3844 3845 3846/* ----------------------------------------------------------------------- */ 3847 3848/* 3849 * minimal bootstrap for the WinTV/PVR -- upload altera firmware. 3850 * 3851 * The hcwamc.rbf firmware file is on the Hauppauge driver CD. Have 3852 * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be 3853 * unpacked with unzip). 3854 */ 3855#define PVR_GPIO_DELAY 10 3856 3857#define BTTV_ALT_DATA 0x000001 3858#define BTTV_ALT_DCLK 0x100000 3859#define BTTV_ALT_NCONFIG 0x800000 3860 3861static int pvr_altera_load(struct bttv *btv, const u8 *micro, u32 microlen) 3862{ 3863 u32 n; 3864 u8 bits; 3865 int i; 3866 3867 gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG); 3868 gpio_write(0); 3869 udelay(PVR_GPIO_DELAY); 3870 3871 gpio_write(BTTV_ALT_NCONFIG); 3872 udelay(PVR_GPIO_DELAY); 3873 3874 for (n = 0; n < microlen; n++) { 3875 bits = micro[n]; 3876 for (i = 0 ; i < 8 ; i++) { 3877 gpio_bits(BTTV_ALT_DCLK,0); 3878 if (bits & 0x01) 3879 gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA); 3880 else 3881 gpio_bits(BTTV_ALT_DATA,0); 3882 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK); 3883 bits >>= 1; 3884 } 3885 } 3886 gpio_bits(BTTV_ALT_DCLK,0); 3887 udelay(PVR_GPIO_DELAY); 3888 3889 /* begin Altera init loop (Not necessary,but doesn't hurt) */ 3890 for (i = 0 ; i < 30 ; i++) { 3891 gpio_bits(BTTV_ALT_DCLK,0); 3892 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK); 3893 } 3894 gpio_bits(BTTV_ALT_DCLK,0); 3895 return 0; 3896} 3897 3898static int pvr_boot(struct bttv *btv) 3899{ 3900 const struct firmware *fw_entry; 3901 int rc; 3902 3903 rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev); 3904 if (rc != 0) { 3905 pr_warn("%d: no altera firmware [via hotplug]\n", btv->c.nr); 3906 return rc; 3907 } 3908 rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size); 3909 pr_info("%d: altera firmware upload %s\n", 3910 btv->c.nr, (rc < 0) ? "failed" : "ok"); 3911 release_firmware(fw_entry); 3912 return rc; 3913} 3914 3915/* ----------------------------------------------------------------------- */ 3916/* some osprey specific stuff */ 3917 3918static void osprey_eeprom(struct bttv *btv, const u8 ee[256]) 3919{ 3920 int i; 3921 u32 serial = 0; 3922 int cardid = -1; 3923 3924 /* This code will never actually get called in this case.... */ 3925 if (btv->c.type == BTTV_BOARD_UNKNOWN) { 3926 /* this might be an antique... check for MMAC label in eeprom */ 3927 if (!strncmp(ee, "MMAC", 4)) { 3928 u8 checksum = 0; 3929 for (i = 0; i < 21; i++) 3930 checksum += ee[i]; 3931 if (checksum != ee[21]) 3932 return; 3933 cardid = BTTV_BOARD_OSPREY1x0_848; 3934 for (i = 12; i < 21; i++) { 3935 serial *= 10; 3936 serial += ee[i] - '0'; 3937 } 3938 } 3939 } else { 3940 unsigned short type; 3941 3942 for (i = 4 * 16; i < 8 * 16; i += 16) { 3943 u16 checksum = (__force u16)ip_compute_csum(ee + i, 16); 3944 3945 if ((checksum & 0xff) + (checksum >> 8) == 0xff) 3946 break; 3947 } 3948 if (i >= 8*16) 3949 return; 3950 ee += i; 3951 3952 /* found a valid descriptor */ 3953 type = get_unaligned_be16((__be16 *)(ee+4)); 3954 3955 switch(type) { 3956 /* 848 based */ 3957 case 0x0004: 3958 cardid = BTTV_BOARD_OSPREY1x0_848; 3959 break; 3960 case 0x0005: 3961 cardid = BTTV_BOARD_OSPREY101_848; 3962 break; 3963 3964 /* 878 based */ 3965 case 0x0012: 3966 case 0x0013: 3967 cardid = BTTV_BOARD_OSPREY1x0; 3968 break; 3969 case 0x0014: 3970 case 0x0015: 3971 cardid = BTTV_BOARD_OSPREY1x1; 3972 break; 3973 case 0x0016: 3974 case 0x0017: 3975 case 0x0020: 3976 cardid = BTTV_BOARD_OSPREY1x1_SVID; 3977 break; 3978 case 0x0018: 3979 case 0x0019: 3980 case 0x001E: 3981 case 0x001F: 3982 cardid = BTTV_BOARD_OSPREY2xx; 3983 break; 3984 case 0x001A: 3985 case 0x001B: 3986 cardid = BTTV_BOARD_OSPREY2x0_SVID; 3987 break; 3988 case 0x0040: 3989 cardid = BTTV_BOARD_OSPREY500; 3990 break; 3991 case 0x0050: 3992 case 0x0056: 3993 cardid = BTTV_BOARD_OSPREY540; 3994 /* bttv_osprey_540_init(btv); */ 3995 break; 3996 case 0x0060: 3997 case 0x0070: 3998 case 0x00A0: 3999 cardid = BTTV_BOARD_OSPREY2x0; 4000 /* enable output on select control lines */ 4001 gpio_inout(0xffffff,0x000303); 4002 break; 4003 case 0x00D8: 4004 cardid = BTTV_BOARD_OSPREY440; 4005 break; 4006 default: 4007 /* unknown...leave generic, but get serial # */ 4008 pr_info("%d: osprey eeprom: unknown card type 0x%04x\n", 4009 btv->c.nr, type); 4010 break; 4011 } 4012 serial = get_unaligned_be32((__be32 *)(ee+6)); 4013 } 4014 4015 pr_info("%d: osprey eeprom: card=%d '%s' serial=%u\n", 4016 btv->c.nr, cardid, 4017 cardid > 0 ? bttv_tvcards[cardid].name : "Unknown", serial); 4018 4019 if (cardid<0 || btv->c.type == cardid) 4020 return; 4021 4022 /* card type isn't set correctly */ 4023 if (card[btv->c.nr] < bttv_num_tvcards) { 4024 pr_warn("%d: osprey eeprom: Not overriding user specified card type\n", 4025 btv->c.nr); 4026 } else { 4027 pr_info("%d: osprey eeprom: Changing card type from %d to %d\n", 4028 btv->c.nr, btv->c.type, cardid); 4029 btv->c.type = cardid; 4030 } 4031} 4032 4033/* ----------------------------------------------------------------------- */ 4034/* AVermedia specific stuff, from bktr_card.c */ 4035 4036static int tuner_0_table[] = { 4037 TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL /* PAL-BG*/, 4038 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL /* PAL-I*/, 4039 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL, 4040 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM, 4041 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL, 4042 TUNER_PHILIPS_FM1216ME_MK3 }; 4043 4044static int tuner_1_table[] = { 4045 TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL, 4046 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL, 4047 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL, 4048 TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */ 4049 TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL}; 4050 4051static void avermedia_eeprom(struct bttv *btv) 4052{ 4053 int tuner_make, tuner_tv_fm, tuner_format, tuner_type = 0; 4054 4055 tuner_make = (eeprom_data[0x41] & 0x7); 4056 tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3; 4057 tuner_format = (eeprom_data[0x42] & 0xf0) >> 4; 4058 btv->has_remote = (eeprom_data[0x42] & 0x01); 4059 4060 if (tuner_make == 0 || tuner_make == 2) 4061 if (tuner_format <= 0x0a) 4062 tuner_type = tuner_0_table[tuner_format]; 4063 if (tuner_make == 1) 4064 if (tuner_format <= 9) 4065 tuner_type = tuner_1_table[tuner_format]; 4066 4067 if (tuner_make == 4) 4068 if (tuner_format == 0x09) 4069 tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */ 4070 4071 pr_info("%d: Avermedia eeprom[0x%02x%02x]: tuner=", 4072 btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]); 4073 if (tuner_type) { 4074 btv->tuner_type = tuner_type; 4075 pr_cont("%d", tuner_type); 4076 } else 4077 pr_cont("Unknown type"); 4078 pr_cont(" radio:%s remote control:%s\n", 4079 tuner_tv_fm ? "yes" : "no", 4080 btv->has_remote ? "yes" : "no"); 4081} 4082 4083/* 4084 * For Voodoo TV/FM and Voodoo 200. These cards' tuners use a TDA9880 4085 * analog demod, which is not I2C controlled like the newer and more common 4086 * TDA9887 series. Instead it has two tri-state input pins, S0 and S1, 4087 * that control the IF for the video and audio. Apparently, bttv GPIO 4088 * 0x10000 is connected to S0. S0 low selects a 38.9 MHz VIF for B/G/D/K/I 4089 * (i.e., PAL) while high selects 45.75 MHz for M/N (i.e., NTSC). 4090 */ 4091u32 bttv_tda9880_setnorm(struct bttv *btv, u32 gpiobits) 4092{ 4093 4094 if (btv->audio_input == TVAUDIO_INPUT_TUNER) { 4095 if (bttv_tvnorms[btv->tvnorm].v4l2_id & V4L2_STD_MN) 4096 gpiobits |= 0x10000; 4097 else 4098 gpiobits &= ~0x10000; 4099 } 4100 4101 gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpiobits); 4102 return gpiobits; 4103} 4104 4105 4106/* 4107 * reset/enable the MSP on some Hauppauge cards 4108 * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)! 4109 * 4110 * Hauppauge: pin 5 4111 * Voodoo: pin 20 4112 */ 4113static void boot_msp34xx(struct bttv *btv, int pin) 4114{ 4115 int mask = (1 << pin); 4116 4117 gpio_inout(mask,mask); 4118 gpio_bits(mask,0); 4119 mdelay(2); 4120 udelay(500); 4121 gpio_bits(mask,mask); 4122 4123 if (bttv_gpio) 4124 bttv_gpio_tracking(btv,"msp34xx"); 4125 if (bttv_verbose) 4126 pr_info("%d: Hauppauge/Voodoo msp34xx: reset line init [%d]\n", 4127 btv->c.nr, pin); 4128} 4129 4130/* ----------------------------------------------------------------------- */ 4131/* Imagenation L-Model PXC200 Framegrabber */ 4132/* This is basically the same procedure as 4133 * used by Alessandro Rubini in his pxc200 4134 * driver, but using BTTV functions */ 4135 4136static void init_PXC200(struct bttv *btv) 4137{ 4138 static int vals[] = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d, 0x01, 0x02, 4139 0x03, 0x04, 0x05, 0x06, 0x00 }; 4140 unsigned int i; 4141 int tmp; 4142 u32 val; 4143 4144 /* Initialise GPIO-connected stuff */ 4145 gpio_inout(0xffffff, (1<<13)); 4146 gpio_write(0); 4147 udelay(3); 4148 gpio_write(1<<13); 4149 /* GPIO inputs are pulled up, so no need to drive 4150 * reset pin any longer */ 4151 gpio_bits(0xffffff, 0); 4152 if (bttv_gpio) 4153 bttv_gpio_tracking(btv,"pxc200"); 4154 4155 /* we could/should try and reset/control the AD pots? but 4156 right now we simply turned off the crushing. Without 4157 this the AGC drifts drifts 4158 remember the EN is reverse logic --> 4159 setting BT848_ADC_AGC_EN disable the AGC 4160 tboult@eecs.lehigh.edu 4161 */ 4162 4163 btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC); 4164 4165 /* Initialise MAX517 DAC */ 4166 pr_info("Setting DAC reference voltage level ...\n"); 4167 bttv_I2CWrite(btv,0x5E,0,0x80,1); 4168 4169 /* Initialise 12C508 PIC */ 4170 /* The I2CWrite and I2CRead commands are actually to the 4171 * same chips - but the R/W bit is included in the address 4172 * argument so the numbers are different */ 4173 4174 4175 pr_info("Initialising 12C508 PIC chip ...\n"); 4176 4177 /* First of all, enable the clock line. This is used in the PXC200-F */ 4178 val = btread(BT848_GPIO_DMA_CTL); 4179 val |= BT848_GPIO_DMA_CTL_GPCLKMODE; 4180 btwrite(val, BT848_GPIO_DMA_CTL); 4181 4182 /* Then, push to 0 the reset pin long enough to reset the * 4183 * device same as above for the reset line, but not the same 4184 * value sent to the GPIO-connected stuff 4185 * which one is the good one? */ 4186 gpio_inout(0xffffff,(1<<2)); 4187 gpio_write(0); 4188 udelay(10); 4189 gpio_write(1<<2); 4190 4191 for (i = 0; i < ARRAY_SIZE(vals); i++) { 4192 tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1); 4193 if (tmp != -1) { 4194 pr_info("I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n", 4195 vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL)); 4196 } 4197 } 4198 4199 pr_info("PXC200 Initialised\n"); 4200} 4201 4202 4203 4204/* ----------------------------------------------------------------------- */ 4205/* 4206 * The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock 4207 * it. This apparently involves the following procedure for each 878 chip: 4208 * 4209 * 1) write 0x00C3FEFF to the GPIO_OUT_EN register 4210 * 4211 * 2) write to GPIO_DATA 4212 * - 0x0E 4213 * - sleep 1ms 4214 * - 0x10 + 0x0E 4215 * - sleep 10ms 4216 * - 0x0E 4217 * read from GPIO_DATA into buf (uint_32) 4218 * - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 ) 4219 * error. ERROR_CPLD_Check_Failed stop. 4220 * 4221 * 3) write to GPIO_DATA 4222 * - write 0x4400 + 0x0E 4223 * - sleep 10ms 4224 * - write 0x4410 + 0x0E 4225 * - sleep 1ms 4226 * - write 0x0E 4227 * read from GPIO_DATA into buf (uint_32) 4228 * - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 ) 4229 * error. ERROR_CPLD_Check_Failed. 4230 */ 4231/* ----------------------------------------------------------------------- */ 4232static void 4233init_RTV24 (struct bttv *btv) 4234{ 4235 uint32_t dataRead = 0; 4236 long watchdog_value = 0x0E; 4237 4238 pr_info("%d: Adlink RTV-24 initialisation in progress ...\n", 4239 btv->c.nr); 4240 4241 btwrite (0x00c3feff, BT848_GPIO_OUT_EN); 4242 4243 btwrite (0 + watchdog_value, BT848_GPIO_DATA); 4244 msleep (1); 4245 btwrite (0x10 + watchdog_value, BT848_GPIO_DATA); 4246 msleep (10); 4247 btwrite (0 + watchdog_value, BT848_GPIO_DATA); 4248 4249 dataRead = btread (BT848_GPIO_DATA); 4250 4251 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) { 4252 pr_info("%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n", 4253 btv->c.nr, dataRead); 4254 } 4255 4256 btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA); 4257 msleep (10); 4258 btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA); 4259 msleep (1); 4260 btwrite (watchdog_value, BT848_GPIO_DATA); 4261 msleep (1); 4262 dataRead = btread (BT848_GPIO_DATA); 4263 4264 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) { 4265 pr_info("%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n", 4266 btv->c.nr, dataRead); 4267 4268 return; 4269 } 4270 4271 pr_info("%d: Adlink RTV-24 initialisation complete\n", btv->c.nr); 4272} 4273 4274 4275 4276/* ----------------------------------------------------------------------- */ 4277/* 4278 * The PCI-8604PW contains a CPLD, probably an ispMACH 4A, that filters 4279 * the PCI REQ signals coming from the four BT878 chips. After power 4280 * up, the CPLD does not forward requests to the bus, which prevents 4281 * the BT878 from fetching RISC instructions from memory. While the 4282 * CPLD is connected to most of the GPIOs of PCI device 0xD, only 4283 * five appear to play a role in unlocking the REQ signal. The following 4284 * sequence has been determined by trial and error without access to the 4285 * original driver. 4286 * 4287 * Eight GPIOs of device 0xC are provided on connector CN4 (4 in, 4 out). 4288 * Devices 0xE and 0xF do not appear to have anything connected to their 4289 * GPIOs. 4290 * 4291 * The correct GPIO_OUT_EN value might have some more bits set. It should 4292 * be possible to derive it from a boundary scan of the CPLD. Its JTAG 4293 * pins are routed to test points. 4294 * 4295 */ 4296/* ----------------------------------------------------------------------- */ 4297static void 4298init_PCI8604PW(struct bttv *btv) 4299{ 4300 int state; 4301 4302 if ((PCI_SLOT(btv->c.pci->devfn) & ~3) != 0xC) { 4303 pr_warn("This is not a PCI-8604PW\n"); 4304 return; 4305 } 4306 4307 if (PCI_SLOT(btv->c.pci->devfn) != 0xD) 4308 return; 4309 4310 btwrite(0x080002, BT848_GPIO_OUT_EN); 4311 4312 state = (btread(BT848_GPIO_DATA) >> 21) & 7; 4313 4314 for (;;) { 4315 switch (state) { 4316 case 1: 4317 case 5: 4318 case 6: 4319 case 4: 4320 pr_debug("PCI-8604PW in state %i, toggling pin\n", 4321 state); 4322 btwrite(0x080000, BT848_GPIO_DATA); 4323 msleep(1); 4324 btwrite(0x000000, BT848_GPIO_DATA); 4325 msleep(1); 4326 break; 4327 case 7: 4328 pr_info("PCI-8604PW unlocked\n"); 4329 return; 4330 case 0: 4331 /* FIXME: If we are in state 7 and toggle GPIO[19] one 4332 more time, the CPLD goes into state 0, where PCI bus 4333 mastering is inhibited again. We have not managed to 4334 get out of that state. */ 4335 4336 pr_err("PCI-8604PW locked until reset\n"); 4337 return; 4338 default: 4339 pr_err("PCI-8604PW in unknown state %i\n", state); 4340 return; 4341 } 4342 4343 state = (state << 4) | ((btread(BT848_GPIO_DATA) >> 21) & 7); 4344 4345 switch (state) { 4346 case 0x15: 4347 case 0x56: 4348 case 0x64: 4349 case 0x47: 4350 /* The transition from state 7 to state 0 is, as explained 4351 above, valid but undesired and with this code impossible 4352 as we exit as soon as we are in state 7. 4353 case 0x70: */ 4354 break; 4355 default: 4356 pr_err("PCI-8604PW invalid transition %i -> %i\n", 4357 state >> 4, state & 7); 4358 return; 4359 } 4360 state &= 7; 4361 } 4362} 4363 4364/* RemoteVision MX (rv605) muxsel helper [Miguel Freitas] 4365 * 4366 * This is needed because rv605 don't use a normal multiplex, but a crosspoint 4367 * switch instead (CD22M3494E). This IC can have multiple active connections 4368 * between Xn (input) and Yn (output) pins. We need to clear any existing 4369 * connection prior to establish a new one, pulsing the STROBE pin. 4370 * 4371 * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin. 4372 * GPIO pins are wired as: 4373 * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller) 4374 * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller) 4375 * GPIO[7] - DATA (xpoint) - P1[7] (microcontroller) 4376 * GPIO[8] - - P3[5] (microcontroller) 4377 * GPIO[9] - RESET (xpoint) - P3[6] (microcontroller) 4378 * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroller) 4379 * GPINTR - - P3[4] (microcontroller) 4380 * 4381 * The microcontroller is a 80C32 like. It should be possible to change xpoint 4382 * configuration either directly (as we are doing) or using the microcontroller 4383 * which is also wired to I2C interface. I have no further info on the 4384 * microcontroller features, one would need to disassembly the firmware. 4385 * note: the vendor refused to give any information on this product, all 4386 * that stuff was found using a multimeter! :) 4387 */ 4388static void rv605_muxsel(struct bttv *btv, unsigned int input) 4389{ 4390 static const u8 muxgpio[] = { 0x3, 0x1, 0x2, 0x4, 0xf, 0x7, 0xe, 0x0, 4391 0xd, 0xb, 0xc, 0x6, 0x9, 0x5, 0x8, 0xa }; 4392 4393 gpio_bits(0x07f, muxgpio[input]); 4394 4395 /* reset all connections */ 4396 gpio_bits(0x200,0x200); 4397 mdelay(1); 4398 gpio_bits(0x200,0x000); 4399 mdelay(1); 4400 4401 /* create a new connection */ 4402 gpio_bits(0x480,0x480); 4403 mdelay(1); 4404 gpio_bits(0x480,0x080); 4405 mdelay(1); 4406} 4407 4408/* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning] 4409 * 4410 * The CS16 (available on eBay cheap) is a PCI board with four Fusion 4411 * 878A chips, a PCI bridge, an Atmel microcontroller, four sync separator 4412 * chips, ten eight input analog multiplexors, a not chip and a few 4413 * other components. 4414 * 4415 * 16 inputs on a secondary bracket are provided and can be selected 4416 * from each of the four capture chips. Two of the eight input 4417 * multiplexors are used to select from any of the 16 input signals. 4418 * 4419 * Unsupported hardware capabilities: 4420 * . A video output monitor on the secondary bracket can be selected from 4421 * one of the 878A chips. 4422 * . Another passthrough but I haven't spent any time investigating it. 4423 * . Digital I/O (logic level connected to GPIO) is available from an 4424 * onboard header. 4425 * 4426 * The on chip input mux should always be set to 2. 4427 * GPIO[16:19] - Video input selection 4428 * GPIO[0:3] - Video output monitor select (only available from one 878A) 4429 * GPIO[?:?] - Digital I/O. 4430 * 4431 * There is an ATMEL microcontroller with an 8031 core on board. I have not 4432 * determined what function (if any) it provides. With the microcontroller 4433 * and sync separator chips a guess is that it might have to do with video 4434 * switching and maybe some digital I/O. 4435 */ 4436static void tibetCS16_muxsel(struct bttv *btv, unsigned int input) 4437{ 4438 /* video mux */ 4439 gpio_bits(0x0f0000, input << 16); 4440} 4441 4442static void tibetCS16_init(struct bttv *btv) 4443{ 4444 /* enable gpio bits, mask obtained via btSpy */ 4445 gpio_inout(0xffffff, 0x0f7fff); 4446 gpio_write(0x0f7fff); 4447} 4448 4449/* 4450 * The following routines for the Kodicom-4400r get a little mind-twisting. 4451 * There is a "master" controller and three "slave" controllers, together 4452 * an analog switch which connects any of 16 cameras to any of the BT87A's. 4453 * The analog switch is controlled by the "master", but the detection order 4454 * of the four BT878A chips is in an order which I just don't understand. 4455 * The "master" is actually the second controller to be detected. The 4456 * logic on the board uses logical numbers for the 4 controllers, but 4457 * those numbers are different from the detection sequence. When working 4458 * with the analog switch, we need to "map" from the detection sequence 4459 * over to the board's logical controller number. This mapping sequence 4460 * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical 4461 * unit 3, the second (which is the master) is logical unit 0, etc. 4462 * We need to maintain the status of the analog switch (which of the 16 4463 * cameras is connected to which of the 4 controllers) in sw_status array. 4464 */ 4465 4466/* 4467 * First a routine to set the analog switch, which controls which camera 4468 * is routed to which controller. The switch comprises an X-address 4469 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a 4470 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3). 4471 * A data value (gpio bit 7) of '1' enables the switch, and '0' disables 4472 * the switch. A STROBE bit (gpio bit 8) latches the data value into the 4473 * specified address. The idea is to set the address and data, then bring 4474 * STROBE high, and finally bring STROBE back to low. 4475 */ 4476static void kodicom4400r_write(struct bttv *btv, 4477 unsigned char xaddr, 4478 unsigned char yaddr, 4479 unsigned char data) { 4480 unsigned int udata; 4481 4482 udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf); 4483 gpio_bits(0x1ff, udata); /* write ADDR and DAT */ 4484 gpio_bits(0x1ff, udata | (1 << 8)); /* strobe high */ 4485 gpio_bits(0x1ff, udata); /* strobe low */ 4486} 4487 4488/* 4489 * Next the mux select. Both the "master" and "slave" 'cards' (controllers) 4490 * use this routine. The routine finds the "master" for the card, maps 4491 * the controller number from the detected position over to the logical 4492 * number, writes the appropriate data to the analog switch, and housekeeps 4493 * the local copy of the switch information. The parameter 'input' is the 4494 * requested camera number (0 - 15). 4495 */ 4496static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input) 4497{ 4498 int xaddr, yaddr; 4499 struct bttv *mctlr; 4500 static unsigned char map[4] = {3, 0, 2, 1}; 4501 4502 mctlr = master[btv->c.nr]; 4503 if (mctlr == NULL) { /* ignore if master not yet detected */ 4504 return; 4505 } 4506 yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */ 4507 yaddr = map[yaddr]; 4508 xaddr = input & 0xf; 4509 /* Check if the controller/camera pair has changed, else ignore */ 4510 if (mctlr->sw_status[yaddr] != xaddr) 4511 { 4512 /* "open" the old switch, "close" the new one, save the new */ 4513 kodicom4400r_write(mctlr, mctlr->sw_status[yaddr], yaddr, 0); 4514 mctlr->sw_status[yaddr] = xaddr; 4515 kodicom4400r_write(mctlr, xaddr, yaddr, 1); 4516 } 4517} 4518 4519/* 4520 * During initialisation, we need to reset the analog switch. We 4521 * also preset the switch to map the 4 connectors on the card to the 4522 * *user's* (see above description of kodicom4400r_muxsel) channels 4523 * 0 through 3 4524 */ 4525static void kodicom4400r_init(struct bttv *btv) 4526{ 4527 int ix; 4528 4529 gpio_inout(0x0003ff, 0x0003ff); 4530 gpio_write(1 << 9); /* reset MUX */ 4531 gpio_write(0); 4532 /* Preset camera 0 to the 4 controllers */ 4533 for (ix = 0; ix < 4; ix++) { 4534 btv->sw_status[ix] = ix; 4535 kodicom4400r_write(btv, ix, ix, 1); 4536 } 4537 /* 4538 * Since this is the "master", we need to set up the 4539 * other three controller chips' pointers to this structure 4540 * for later use in the muxsel routine. 4541 */ 4542 if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3)) 4543 return; 4544 master[btv->c.nr-1] = btv; 4545 master[btv->c.nr] = btv; 4546 master[btv->c.nr+1] = btv; 4547 master[btv->c.nr+2] = btv; 4548} 4549 4550/* The Grandtec X-Guard framegrabber card uses two Dual 4-channel 4551 * video multiplexers to provide up to 16 video inputs. These 4552 * multiplexers are controlled by the lower 8 GPIO pins of the 4553 * bt878. The multiplexers probably Pericom PI5V331Q or similar. 4554 4555 * xxx0 is pin xxx of multiplexer U5, 4556 * yyy1 is pin yyy of multiplexer U2 4557 */ 4558#define ENA0 0x01 4559#define ENB0 0x02 4560#define ENA1 0x04 4561#define ENB1 0x08 4562 4563#define IN10 0x10 4564#define IN00 0x20 4565#define IN11 0x40 4566#define IN01 0x80 4567 4568static void xguard_muxsel(struct bttv *btv, unsigned int input) 4569{ 4570 static const int masks[] = { 4571 ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10, 4572 ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10, 4573 ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11, 4574 ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11, 4575 }; 4576 gpio_write(masks[input%16]); 4577} 4578static void picolo_tetra_init(struct bttv *btv) 4579{ 4580 /*This is the video input redirection functionality : I DID NOT USE IT. */ 4581 btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */ 4582 btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A] set to 1*/ 4583} 4584static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input) 4585{ 4586 4587 dprintk("%d : picolo_tetra_muxsel => input = %d\n", btv->c.nr, input); 4588 /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/ 4589 /*GPIO[20]&GPIO[21] used to choose the right input*/ 4590 btwrite (input<<20,BT848_GPIO_DATA); 4591 4592} 4593 4594/* 4595 * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>] 4596 * 4597 * The IVC120G security card has 4 i2c controlled TDA8540 matrix 4598 * switchers to provide 16 channels to MUX0. The TDA8540's have 4599 * 4 independent outputs and as such the IVC120G also has the 4600 * optional "Monitor Out" bus. This allows the card to be looking 4601 * at one input while the monitor is looking at another. 4602 * 4603 * Since I've couldn't be bothered figuring out how to add an 4604 * independent muxsel for the monitor bus, I've just set it to 4605 * whatever the card is looking at. 4606 * 4607 * OUT0 of the TDA8540's is connected to MUX0 (0x03) 4608 * OUT1 of the TDA8540's is connected to "Monitor Out" (0x0C) 4609 * 4610 * TDA8540_ALT3 IN0-3 = Channel 13 - 16 (0x03) 4611 * TDA8540_ALT4 IN0-3 = Channel 1 - 4 (0x03) 4612 * TDA8540_ALT5 IN0-3 = Channel 5 - 8 (0x03) 4613 * TDA8540_ALT6 IN0-3 = Channel 9 - 12 (0x03) 4614 * 4615 */ 4616 4617/* All 7 possible sub-ids for the TDA8540 Matrix Switcher */ 4618#define I2C_TDA8540 0x90 4619#define I2C_TDA8540_ALT1 0x92 4620#define I2C_TDA8540_ALT2 0x94 4621#define I2C_TDA8540_ALT3 0x96 4622#define I2C_TDA8540_ALT4 0x98 4623#define I2C_TDA8540_ALT5 0x9a 4624#define I2C_TDA8540_ALT6 0x9c 4625 4626static void ivc120_muxsel(struct bttv *btv, unsigned int input) 4627{ 4628 /* Simple maths */ 4629 int key = input % 4; 4630 int matrix = input / 4; 4631 4632 dprintk("%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n", 4633 btv->c.nr, input, matrix, key); 4634 4635 /* Handles the input selection on the TDA8540's */ 4636 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00, 4637 ((matrix == 3) ? (key | key << 2) : 0x00), 1); 4638 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00, 4639 ((matrix == 0) ? (key | key << 2) : 0x00), 1); 4640 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00, 4641 ((matrix == 1) ? (key | key << 2) : 0x00), 1); 4642 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00, 4643 ((matrix == 2) ? (key | key << 2) : 0x00), 1); 4644 4645 /* Handles the output enables on the TDA8540's */ 4646 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02, 4647 ((matrix == 3) ? 0x03 : 0x00), 1); /* 13 - 16 */ 4648 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02, 4649 ((matrix == 0) ? 0x03 : 0x00), 1); /* 1-4 */ 4650 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02, 4651 ((matrix == 1) ? 0x03 : 0x00), 1); /* 5-8 */ 4652 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02, 4653 ((matrix == 2) ? 0x03 : 0x00), 1); /* 9-12 */ 4654 4655 /* 878's MUX0 is already selected for input via muxsel values */ 4656} 4657 4658 4659/* PXC200 muxsel helper 4660 * luke@syseng.anu.edu.au 4661 * another transplant 4662 * from Alessandro Rubini (rubini@linux.it) 4663 * 4664 * There are 4 kinds of cards: 4665 * PXC200L which is bt848 4666 * PXC200F which is bt848 with PIC controlling mux 4667 * PXC200AL which is bt878 4668 * PXC200AF which is bt878 with PIC controlling mux 4669 */ 4670#define PX_CFG_PXC200F 0x01 4671#define PX_FLAG_PXC200A 0x00001000 /* a pxc200A is bt-878 based */ 4672#define PX_I2C_PIC 0x0f 4673#define PX_PXC200A_CARDID 0x200a1295 4674#define PX_I2C_CMD_CFG 0x00 4675 4676static void PXC200_muxsel(struct bttv *btv, unsigned int input) 4677{ 4678 int rc; 4679 long mux; 4680 int bitmask; 4681 unsigned char buf[2]; 4682 4683 /* Read PIC config to determine if this is a PXC200F */ 4684 /* PX_I2C_CMD_CFG*/ 4685 buf[0]=0; 4686 buf[1]=0; 4687 rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1); 4688 if (rc) { 4689 pr_debug("%d: PXC200_muxsel: pic cfg write failed:%d\n", 4690 btv->c.nr, rc); 4691 /* not PXC ? do nothing */ 4692 return; 4693 } 4694 4695 rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL); 4696 if (!(rc & PX_CFG_PXC200F)) { 4697 pr_debug("%d: PXC200_muxsel: not PXC200F rc:%d\n", 4698 btv->c.nr, rc); 4699 return; 4700 } 4701 4702 4703 /* The multiplexer in the 200F is handled by the GPIO port */ 4704 /* get correct mapping between inputs */ 4705 /* mux = bttv_tvcards[btv->type].muxsel[input] & 3; */ 4706 /* ** not needed!? */ 4707 mux = input; 4708 4709 /* make sure output pins are enabled */ 4710 /* bitmask=0x30f; */ 4711 bitmask=0x302; 4712 /* check whether we have a PXC200A */ 4713 if (btv->cardid == PX_PXC200A_CARDID) { 4714 bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */ 4715 bitmask |= 7<<4; /* the DAC */ 4716 } 4717 btwrite(bitmask, BT848_GPIO_OUT_EN); 4718 4719 bitmask = btread(BT848_GPIO_DATA); 4720 if (btv->cardid == PX_PXC200A_CARDID) 4721 bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7); 4722 else /* older device */ 4723 bitmask = (bitmask & ~0x300) | ((mux & 3) << 8); 4724 btwrite(bitmask,BT848_GPIO_DATA); 4725 4726 /* 4727 * Was "to be safe, set the bt848 to input 0" 4728 * Actually, since it's ok at load time, better not messing 4729 * with these bits (on PXC200AF you need to set mux 2 here) 4730 * 4731 * needed because bttv-driver sets mux before calling this function 4732 */ 4733 if (btv->cardid == PX_PXC200A_CARDID) 4734 btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM); 4735 else /* older device */ 4736 btand(~BT848_IFORM_MUXSEL,BT848_IFORM); 4737 4738 pr_debug("%d: setting input channel to:%d\n", btv->c.nr, (int)mux); 4739} 4740 4741static void phytec_muxsel(struct bttv *btv, unsigned int input) 4742{ 4743 unsigned int mux = input % 4; 4744 4745 if (input == btv->svhs) 4746 mux = 0; 4747 4748 gpio_bits(0x3, mux); 4749} 4750 4751/* 4752 * GeoVision GV-800(S) functions 4753 * Bruno Christo <bchristo@inf.ufsm.br> 4754*/ 4755 4756/* This is a function to control the analog switch, which determines which 4757 * camera is routed to which controller. The switch comprises an X-address 4758 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a 4759 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3). 4760 * A data value (gpio bit 18) of '1' enables the switch, and '0' disables 4761 * the switch. A STROBE bit (gpio bit 17) latches the data value into the 4762 * specified address. There is also a chip select (gpio bit 16). 4763 * The idea is to set the address and chip select together, bring 4764 * STROBE high, write the data, and finally bring STROBE back to low. 4765 */ 4766static void gv800s_write(struct bttv *btv, 4767 unsigned char xaddr, 4768 unsigned char yaddr, 4769 unsigned char data) { 4770 /* On the "master" 878A: 4771 * GPIO bits 0-9 are used for the analog switch: 4772 * 00 - 03: camera selector 4773 * 04 - 06: 878A (controller) selector 4774 * 16: cselect 4775 * 17: strobe 4776 * 18: data (1->on, 0->off) 4777 * 19: reset 4778 */ 4779 const u32 ADDRESS = ((xaddr&0xf) | (yaddr&3)<<4); 4780 const u32 CSELECT = 1<<16; 4781 const u32 STROBE = 1<<17; 4782 const u32 DATA = data<<18; 4783 4784 gpio_bits(0x1007f, ADDRESS | CSELECT); /* write ADDRESS and CSELECT */ 4785 gpio_bits(0x20000, STROBE); /* STROBE high */ 4786 gpio_bits(0x40000, DATA); /* write DATA */ 4787 gpio_bits(0x20000, ~STROBE); /* STROBE low */ 4788} 4789 4790/* 4791 * GeoVision GV-800(S) muxsel 4792 * 4793 * Each of the 4 cards (controllers) use this function. 4794 * The controller using this function selects the input through the GPIO pins 4795 * of the "master" card. A pointer to this card is stored in master[btv->c.nr]. 4796 * 4797 * The parameter 'input' is the requested camera number (0-4) on the controller. 4798 * The map array has the address of each input. Note that the addresses in the 4799 * array are in the sequence the original GeoVision driver uses, that is, set 4800 * every controller to input 0, then to input 1, 2, 3, repeat. This means that 4801 * the physical "camera 1" connector corresponds to controller 0 input 0, 4802 * "camera 2" corresponds to controller 1 input 0, and so on. 4803 * 4804 * After getting the input address, the function then writes the appropriate 4805 * data to the analog switch, and housekeeps the local copy of the switch 4806 * information. 4807 */ 4808static void gv800s_muxsel(struct bttv *btv, unsigned int input) 4809{ 4810 struct bttv *mctlr; 4811 int xaddr, yaddr; 4812 static unsigned int map[4][4] = { { 0x0, 0x4, 0xa, 0x6 }, 4813 { 0x1, 0x5, 0xb, 0x7 }, 4814 { 0x2, 0x8, 0xc, 0xe }, 4815 { 0x3, 0x9, 0xd, 0xf } }; 4816 input = input%4; 4817 mctlr = master[btv->c.nr]; 4818 if (mctlr == NULL) { 4819 /* do nothing until the "master" is detected */ 4820 return; 4821 } 4822 yaddr = (btv->c.nr - mctlr->c.nr) & 3; 4823 xaddr = map[yaddr][input] & 0xf; 4824 4825 /* Check if the controller/camera pair has changed, ignore otherwise */ 4826 if (mctlr->sw_status[yaddr] != xaddr) { 4827 /* disable the old switch, enable the new one and save status */ 4828 gv800s_write(mctlr, mctlr->sw_status[yaddr], yaddr, 0); 4829 mctlr->sw_status[yaddr] = xaddr; 4830 gv800s_write(mctlr, xaddr, yaddr, 1); 4831 } 4832} 4833 4834/* GeoVision GV-800(S) "master" chip init */ 4835static void gv800s_init(struct bttv *btv) 4836{ 4837 int ix; 4838 4839 gpio_inout(0xf107f, 0xf107f); 4840 gpio_write(1<<19); /* reset the analog MUX */ 4841 gpio_write(0); 4842 4843 /* Preset camera 0 to the 4 controllers */ 4844 for (ix = 0; ix < 4; ix++) { 4845 btv->sw_status[ix] = ix; 4846 gv800s_write(btv, ix, ix, 1); 4847 } 4848 4849 /* Inputs on the "master" controller need this brightness fix */ 4850 bttv_I2CWrite(btv, 0x18, 0x5, 0x90, 1); 4851 4852 if (btv->c.nr > BTTV_MAX-4) 4853 return; 4854 /* 4855 * Store the "master" controller pointer in the master 4856 * array for later use in the muxsel function. 4857 */ 4858 master[btv->c.nr] = btv; 4859 master[btv->c.nr+1] = btv; 4860 master[btv->c.nr+2] = btv; 4861 master[btv->c.nr+3] = btv; 4862} 4863 4864/* ----------------------------------------------------------------------- */ 4865/* motherboard chipset specific stuff */ 4866 4867void __init bttv_check_chipset(void) 4868{ 4869 struct pci_dev *dev = NULL; 4870 4871 if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF)) 4872 triton1 = 1; 4873 if (pci_pci_problems & PCIPCI_VSFX) 4874 vsfx = 1; 4875#ifdef PCIPCI_ALIMAGIK 4876 if (pci_pci_problems & PCIPCI_ALIMAGIK) 4877 latency = 0x0A; 4878#endif 4879 4880 4881 /* print warnings about any quirks found */ 4882 if (triton1) 4883 pr_info("Host bridge needs ETBF enabled\n"); 4884 if (vsfx) 4885 pr_info("Host bridge needs VSFX enabled\n"); 4886 if (UNSET != latency) 4887 pr_info("pci latency fixup [%d]\n", latency); 4888 while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL, 4889 PCI_DEVICE_ID_INTEL_82441, dev))) { 4890 unsigned char b; 4891 pci_read_config_byte(dev, 0x53, &b); 4892 if (bttv_debug) 4893 pr_info("Host bridge: 82441FX Natoma, bufcon=0x%02x\n", 4894 b); 4895 } 4896} 4897 4898int bttv_handle_chipset(struct bttv *btv) 4899{ 4900 unsigned char command; 4901 4902 if (!triton1 && !vsfx && UNSET == latency) 4903 return 0; 4904 4905 if (bttv_verbose) { 4906 if (triton1) 4907 pr_info("%d: enabling ETBF (430FX/VP3 compatibility)\n", 4908 btv->c.nr); 4909 if (vsfx && btv->id >= 878) 4910 pr_info("%d: enabling VSFX\n", btv->c.nr); 4911 if (UNSET != latency) 4912 pr_info("%d: setting pci timer to %d\n", 4913 btv->c.nr, latency); 4914 } 4915 4916 if (btv->id < 878) { 4917 /* bt848 (mis)uses a bit in the irq mask for etbf */ 4918 if (triton1) 4919 btv->triton1 = BT848_INT_ETBF; 4920 } else { 4921 /* bt878 has a bit in the pci config space for it */ 4922 pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command); 4923 if (triton1) 4924 command |= BT878_EN_TBFX; 4925 if (vsfx) 4926 command |= BT878_EN_VSFX; 4927 pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command); 4928 } 4929 if (UNSET != latency) 4930 pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency); 4931 return 0; 4932} 4933