1/* 2 * Copyright (c) 2012, 2013 Intel Corporation. All rights reserved. 3 * Copyright (c) 2006 - 2012 QLogic Corporation. All rights reserved. 4 * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved. 5 * 6 * This software is available to you under a choice of one of two 7 * licenses. You may choose to be licensed under the terms of the GNU 8 * General Public License (GPL) Version 2, available from the file 9 * COPYING in the main directory of this source tree, or the 10 * OpenIB.org BSD license below: 11 * 12 * Redistribution and use in source and binary forms, with or 13 * without modification, are permitted provided that the following 14 * conditions are met: 15 * 16 * - Redistributions of source code must retain the above 17 * copyright notice, this list of conditions and the following 18 * disclaimer. 19 * 20 * - Redistributions in binary form must reproduce the above 21 * copyright notice, this list of conditions and the following 22 * disclaimer in the documentation and/or other materials 23 * provided with the distribution. 24 * 25 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 26 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF 27 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 28 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS 29 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN 30 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN 31 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE 32 * SOFTWARE. 33 */ 34 35#include <linux/pci.h> 36#include <linux/netdevice.h> 37#include <linux/vmalloc.h> 38#include <linux/delay.h> 39#include <linux/module.h> 40#include <linux/printk.h> 41#ifdef CONFIG_INFINIBAND_QIB_DCA 42#include <linux/dca.h> 43#endif 44#include <rdma/rdma_vt.h> 45 46#include "qib.h" 47#include "qib_common.h" 48#include "qib_mad.h" 49#ifdef CONFIG_DEBUG_FS 50#include "qib_debugfs.h" 51#include "qib_verbs.h" 52#endif 53 54#undef pr_fmt 55#define pr_fmt(fmt) QIB_DRV_NAME ": " fmt 56 57/* 58 * min buffers we want to have per context, after driver 59 */ 60#define QIB_MIN_USER_CTXT_BUFCNT 7 61 62#define QLOGIC_IB_R_SOFTWARE_MASK 0xFF 63#define QLOGIC_IB_R_SOFTWARE_SHIFT 24 64#define QLOGIC_IB_R_EMULATOR_MASK (1ULL<<62) 65 66/* 67 * Number of ctxts we are configured to use (to allow for more pio 68 * buffers per ctxt, etc.) Zero means use chip value. 69 */ 70ushort qib_cfgctxts; 71module_param_named(cfgctxts, qib_cfgctxts, ushort, S_IRUGO); 72MODULE_PARM_DESC(cfgctxts, "Set max number of contexts to use"); 73 74unsigned qib_numa_aware; 75module_param_named(numa_aware, qib_numa_aware, uint, S_IRUGO); 76MODULE_PARM_DESC(numa_aware, 77 "0 -> PSM allocation close to HCA, 1 -> PSM allocation local to process"); 78 79/* 80 * If set, do not write to any regs if avoidable, hack to allow 81 * check for deranged default register values. 82 */ 83ushort qib_mini_init; 84module_param_named(mini_init, qib_mini_init, ushort, S_IRUGO); 85MODULE_PARM_DESC(mini_init, "If set, do minimal diag init"); 86 87unsigned qib_n_krcv_queues; 88module_param_named(krcvqs, qib_n_krcv_queues, uint, S_IRUGO); 89MODULE_PARM_DESC(krcvqs, "number of kernel receive queues per IB port"); 90 91unsigned qib_cc_table_size; 92module_param_named(cc_table_size, qib_cc_table_size, uint, S_IRUGO); 93MODULE_PARM_DESC(cc_table_size, "Congestion control table entries 0 (CCA disabled - default), min = 128, max = 1984"); 94 95static void verify_interrupt(struct timer_list *); 96 97DEFINE_XARRAY_FLAGS(qib_dev_table, XA_FLAGS_ALLOC | XA_FLAGS_LOCK_IRQ); 98u32 qib_cpulist_count; 99unsigned long *qib_cpulist; 100 101/* set number of contexts we'll actually use */ 102void qib_set_ctxtcnt(struct qib_devdata *dd) 103{ 104 if (!qib_cfgctxts) { 105 dd->cfgctxts = dd->first_user_ctxt + num_online_cpus(); 106 if (dd->cfgctxts > dd->ctxtcnt) 107 dd->cfgctxts = dd->ctxtcnt; 108 } else if (qib_cfgctxts < dd->num_pports) 109 dd->cfgctxts = dd->ctxtcnt; 110 else if (qib_cfgctxts <= dd->ctxtcnt) 111 dd->cfgctxts = qib_cfgctxts; 112 else 113 dd->cfgctxts = dd->ctxtcnt; 114 dd->freectxts = (dd->first_user_ctxt > dd->cfgctxts) ? 0 : 115 dd->cfgctxts - dd->first_user_ctxt; 116} 117 118/* 119 * Common code for creating the receive context array. 120 */ 121int qib_create_ctxts(struct qib_devdata *dd) 122{ 123 unsigned i; 124 int local_node_id = pcibus_to_node(dd->pcidev->bus); 125 126 if (local_node_id < 0) 127 local_node_id = numa_node_id(); 128 dd->assigned_node_id = local_node_id; 129 130 /* 131 * Allocate full ctxtcnt array, rather than just cfgctxts, because 132 * cleanup iterates across all possible ctxts. 133 */ 134 dd->rcd = kcalloc(dd->ctxtcnt, sizeof(*dd->rcd), GFP_KERNEL); 135 if (!dd->rcd) 136 return -ENOMEM; 137 138 /* create (one or more) kctxt */ 139 for (i = 0; i < dd->first_user_ctxt; ++i) { 140 struct qib_pportdata *ppd; 141 struct qib_ctxtdata *rcd; 142 143 if (dd->skip_kctxt_mask & (1 << i)) 144 continue; 145 146 ppd = dd->pport + (i % dd->num_pports); 147 148 rcd = qib_create_ctxtdata(ppd, i, dd->assigned_node_id); 149 if (!rcd) { 150 qib_dev_err(dd, 151 "Unable to allocate ctxtdata for Kernel ctxt, failing\n"); 152 kfree(dd->rcd); 153 dd->rcd = NULL; 154 return -ENOMEM; 155 } 156 rcd->pkeys[0] = QIB_DEFAULT_P_KEY; 157 rcd->seq_cnt = 1; 158 } 159 return 0; 160} 161 162/* 163 * Common code for user and kernel context setup. 164 */ 165struct qib_ctxtdata *qib_create_ctxtdata(struct qib_pportdata *ppd, u32 ctxt, 166 int node_id) 167{ 168 struct qib_devdata *dd = ppd->dd; 169 struct qib_ctxtdata *rcd; 170 171 rcd = kzalloc_node(sizeof(*rcd), GFP_KERNEL, node_id); 172 if (rcd) { 173 INIT_LIST_HEAD(&rcd->qp_wait_list); 174 rcd->node_id = node_id; 175 rcd->ppd = ppd; 176 rcd->dd = dd; 177 rcd->cnt = 1; 178 rcd->ctxt = ctxt; 179 dd->rcd[ctxt] = rcd; 180#ifdef CONFIG_DEBUG_FS 181 if (ctxt < dd->first_user_ctxt) { /* N/A for PSM contexts */ 182 rcd->opstats = kzalloc_node(sizeof(*rcd->opstats), 183 GFP_KERNEL, node_id); 184 if (!rcd->opstats) { 185 kfree(rcd); 186 qib_dev_err(dd, 187 "Unable to allocate per ctxt stats buffer\n"); 188 return NULL; 189 } 190 } 191#endif 192 dd->f_init_ctxt(rcd); 193 194 /* 195 * To avoid wasting a lot of memory, we allocate 32KB chunks 196 * of physically contiguous memory, advance through it until 197 * used up and then allocate more. Of course, we need 198 * memory to store those extra pointers, now. 32KB seems to 199 * be the most that is "safe" under memory pressure 200 * (creating large files and then copying them over 201 * NFS while doing lots of MPI jobs). The OOM killer can 202 * get invoked, even though we say we can sleep and this can 203 * cause significant system problems.... 204 */ 205 rcd->rcvegrbuf_size = 0x8000; 206 rcd->rcvegrbufs_perchunk = 207 rcd->rcvegrbuf_size / dd->rcvegrbufsize; 208 rcd->rcvegrbuf_chunks = (rcd->rcvegrcnt + 209 rcd->rcvegrbufs_perchunk - 1) / 210 rcd->rcvegrbufs_perchunk; 211 rcd->rcvegrbufs_perchunk_shift = 212 ilog2(rcd->rcvegrbufs_perchunk); 213 } 214 return rcd; 215} 216 217/* 218 * Common code for initializing the physical port structure. 219 */ 220int qib_init_pportdata(struct qib_pportdata *ppd, struct qib_devdata *dd, 221 u8 hw_pidx, u8 port) 222{ 223 int size; 224 225 ppd->dd = dd; 226 ppd->hw_pidx = hw_pidx; 227 ppd->port = port; /* IB port number, not index */ 228 229 spin_lock_init(&ppd->sdma_lock); 230 spin_lock_init(&ppd->lflags_lock); 231 spin_lock_init(&ppd->cc_shadow_lock); 232 init_waitqueue_head(&ppd->state_wait); 233 234 timer_setup(&ppd->symerr_clear_timer, qib_clear_symerror_on_linkup, 0); 235 236 ppd->qib_wq = NULL; 237 ppd->ibport_data.pmastats = 238 alloc_percpu(struct qib_pma_counters); 239 if (!ppd->ibport_data.pmastats) 240 return -ENOMEM; 241 ppd->ibport_data.rvp.rc_acks = alloc_percpu(u64); 242 ppd->ibport_data.rvp.rc_qacks = alloc_percpu(u64); 243 ppd->ibport_data.rvp.rc_delayed_comp = alloc_percpu(u64); 244 if (!(ppd->ibport_data.rvp.rc_acks) || 245 !(ppd->ibport_data.rvp.rc_qacks) || 246 !(ppd->ibport_data.rvp.rc_delayed_comp)) 247 return -ENOMEM; 248 249 if (qib_cc_table_size < IB_CCT_MIN_ENTRIES) 250 goto bail; 251 252 ppd->cc_supported_table_entries = min(max_t(int, qib_cc_table_size, 253 IB_CCT_MIN_ENTRIES), IB_CCT_ENTRIES*IB_CC_TABLE_CAP_DEFAULT); 254 255 ppd->cc_max_table_entries = 256 ppd->cc_supported_table_entries/IB_CCT_ENTRIES; 257 258 size = IB_CC_TABLE_CAP_DEFAULT * sizeof(struct ib_cc_table_entry) 259 * IB_CCT_ENTRIES; 260 ppd->ccti_entries = kzalloc(size, GFP_KERNEL); 261 if (!ppd->ccti_entries) 262 goto bail; 263 264 size = IB_CC_CCS_ENTRIES * sizeof(struct ib_cc_congestion_entry); 265 ppd->congestion_entries = kzalloc(size, GFP_KERNEL); 266 if (!ppd->congestion_entries) 267 goto bail_1; 268 269 size = sizeof(struct cc_table_shadow); 270 ppd->ccti_entries_shadow = kzalloc(size, GFP_KERNEL); 271 if (!ppd->ccti_entries_shadow) 272 goto bail_2; 273 274 size = sizeof(struct ib_cc_congestion_setting_attr); 275 ppd->congestion_entries_shadow = kzalloc(size, GFP_KERNEL); 276 if (!ppd->congestion_entries_shadow) 277 goto bail_3; 278 279 return 0; 280 281bail_3: 282 kfree(ppd->ccti_entries_shadow); 283 ppd->ccti_entries_shadow = NULL; 284bail_2: 285 kfree(ppd->congestion_entries); 286 ppd->congestion_entries = NULL; 287bail_1: 288 kfree(ppd->ccti_entries); 289 ppd->ccti_entries = NULL; 290bail: 291 /* User is intentionally disabling the congestion control agent */ 292 if (!qib_cc_table_size) 293 return 0; 294 295 if (qib_cc_table_size < IB_CCT_MIN_ENTRIES) { 296 qib_cc_table_size = 0; 297 qib_dev_err(dd, 298 "Congestion Control table size %d less than minimum %d for port %d\n", 299 qib_cc_table_size, IB_CCT_MIN_ENTRIES, port); 300 } 301 302 qib_dev_err(dd, "Congestion Control Agent disabled for port %d\n", 303 port); 304 return 0; 305} 306 307static int init_pioavailregs(struct qib_devdata *dd) 308{ 309 int ret, pidx; 310 u64 *status_page; 311 312 dd->pioavailregs_dma = dma_alloc_coherent( 313 &dd->pcidev->dev, PAGE_SIZE, &dd->pioavailregs_phys, 314 GFP_KERNEL); 315 if (!dd->pioavailregs_dma) { 316 qib_dev_err(dd, 317 "failed to allocate PIOavail reg area in memory\n"); 318 ret = -ENOMEM; 319 goto done; 320 } 321 322 /* 323 * We really want L2 cache aligned, but for current CPUs of 324 * interest, they are the same. 325 */ 326 status_page = (u64 *) 327 ((char *) dd->pioavailregs_dma + 328 ((2 * L1_CACHE_BYTES + 329 dd->pioavregs * sizeof(u64)) & ~L1_CACHE_BYTES)); 330 /* device status comes first, for backwards compatibility */ 331 dd->devstatusp = status_page; 332 *status_page++ = 0; 333 for (pidx = 0; pidx < dd->num_pports; ++pidx) { 334 dd->pport[pidx].statusp = status_page; 335 *status_page++ = 0; 336 } 337 338 /* 339 * Setup buffer to hold freeze and other messages, accessible to 340 * apps, following statusp. This is per-unit, not per port. 341 */ 342 dd->freezemsg = (char *) status_page; 343 *dd->freezemsg = 0; 344 /* length of msg buffer is "whatever is left" */ 345 ret = (char *) status_page - (char *) dd->pioavailregs_dma; 346 dd->freezelen = PAGE_SIZE - ret; 347 348 ret = 0; 349 350done: 351 return ret; 352} 353 354/** 355 * init_shadow_tids - allocate the shadow TID array 356 * @dd: the qlogic_ib device 357 * 358 * allocate the shadow TID array, so we can qib_munlock previous 359 * entries. It may make more sense to move the pageshadow to the 360 * ctxt data structure, so we only allocate memory for ctxts actually 361 * in use, since we at 8k per ctxt, now. 362 * We don't want failures here to prevent use of the driver/chip, 363 * so no return value. 364 */ 365static void init_shadow_tids(struct qib_devdata *dd) 366{ 367 struct page **pages; 368 dma_addr_t *addrs; 369 370 pages = vzalloc(array_size(sizeof(struct page *), 371 dd->cfgctxts * dd->rcvtidcnt)); 372 if (!pages) 373 goto bail; 374 375 addrs = vzalloc(array_size(sizeof(dma_addr_t), 376 dd->cfgctxts * dd->rcvtidcnt)); 377 if (!addrs) 378 goto bail_free; 379 380 dd->pageshadow = pages; 381 dd->physshadow = addrs; 382 return; 383 384bail_free: 385 vfree(pages); 386bail: 387 dd->pageshadow = NULL; 388} 389 390/* 391 * Do initialization for device that is only needed on 392 * first detect, not on resets. 393 */ 394static int loadtime_init(struct qib_devdata *dd) 395{ 396 int ret = 0; 397 398 if (((dd->revision >> QLOGIC_IB_R_SOFTWARE_SHIFT) & 399 QLOGIC_IB_R_SOFTWARE_MASK) != QIB_CHIP_SWVERSION) { 400 qib_dev_err(dd, 401 "Driver only handles version %d, chip swversion is %d (%llx), failing\n", 402 QIB_CHIP_SWVERSION, 403 (int)(dd->revision >> 404 QLOGIC_IB_R_SOFTWARE_SHIFT) & 405 QLOGIC_IB_R_SOFTWARE_MASK, 406 (unsigned long long) dd->revision); 407 ret = -ENOSYS; 408 goto done; 409 } 410 411 if (dd->revision & QLOGIC_IB_R_EMULATOR_MASK) 412 qib_devinfo(dd->pcidev, "%s", dd->boardversion); 413 414 spin_lock_init(&dd->pioavail_lock); 415 spin_lock_init(&dd->sendctrl_lock); 416 spin_lock_init(&dd->uctxt_lock); 417 spin_lock_init(&dd->qib_diag_trans_lock); 418 spin_lock_init(&dd->eep_st_lock); 419 mutex_init(&dd->eep_lock); 420 421 if (qib_mini_init) 422 goto done; 423 424 ret = init_pioavailregs(dd); 425 init_shadow_tids(dd); 426 427 qib_get_eeprom_info(dd); 428 429 /* setup time (don't start yet) to verify we got interrupt */ 430 timer_setup(&dd->intrchk_timer, verify_interrupt, 0); 431done: 432 return ret; 433} 434 435/** 436 * init_after_reset - re-initialize after a reset 437 * @dd: the qlogic_ib device 438 * 439 * sanity check at least some of the values after reset, and 440 * ensure no receive or transmit (explicitly, in case reset 441 * failed 442 */ 443static int init_after_reset(struct qib_devdata *dd) 444{ 445 int i; 446 447 /* 448 * Ensure chip does no sends or receives, tail updates, or 449 * pioavail updates while we re-initialize. This is mostly 450 * for the driver data structures, not chip registers. 451 */ 452 for (i = 0; i < dd->num_pports; ++i) { 453 /* 454 * ctxt == -1 means "all contexts". Only really safe for 455 * _dis_abling things, as here. 456 */ 457 dd->f_rcvctrl(dd->pport + i, QIB_RCVCTRL_CTXT_DIS | 458 QIB_RCVCTRL_INTRAVAIL_DIS | 459 QIB_RCVCTRL_TAILUPD_DIS, -1); 460 /* Redundant across ports for some, but no big deal. */ 461 dd->f_sendctrl(dd->pport + i, QIB_SENDCTRL_SEND_DIS | 462 QIB_SENDCTRL_AVAIL_DIS); 463 } 464 465 return 0; 466} 467 468static void enable_chip(struct qib_devdata *dd) 469{ 470 u64 rcvmask; 471 int i; 472 473 /* 474 * Enable PIO send, and update of PIOavail regs to memory. 475 */ 476 for (i = 0; i < dd->num_pports; ++i) 477 dd->f_sendctrl(dd->pport + i, QIB_SENDCTRL_SEND_ENB | 478 QIB_SENDCTRL_AVAIL_ENB); 479 /* 480 * Enable kernel ctxts' receive and receive interrupt. 481 * Other ctxts done as user opens and inits them. 482 */ 483 rcvmask = QIB_RCVCTRL_CTXT_ENB | QIB_RCVCTRL_INTRAVAIL_ENB; 484 rcvmask |= (dd->flags & QIB_NODMA_RTAIL) ? 485 QIB_RCVCTRL_TAILUPD_DIS : QIB_RCVCTRL_TAILUPD_ENB; 486 for (i = 0; dd->rcd && i < dd->first_user_ctxt; ++i) { 487 struct qib_ctxtdata *rcd = dd->rcd[i]; 488 489 if (rcd) 490 dd->f_rcvctrl(rcd->ppd, rcvmask, i); 491 } 492} 493 494static void verify_interrupt(struct timer_list *t) 495{ 496 struct qib_devdata *dd = from_timer(dd, t, intrchk_timer); 497 u64 int_counter; 498 499 if (!dd) 500 return; /* being torn down */ 501 502 /* 503 * If we don't have a lid or any interrupts, let the user know and 504 * don't bother checking again. 505 */ 506 int_counter = qib_int_counter(dd) - dd->z_int_counter; 507 if (int_counter == 0) { 508 if (!dd->f_intr_fallback(dd)) 509 dev_err(&dd->pcidev->dev, 510 "No interrupts detected, not usable.\n"); 511 else /* re-arm the timer to see if fallback works */ 512 mod_timer(&dd->intrchk_timer, jiffies + HZ/2); 513 } 514} 515 516static void init_piobuf_state(struct qib_devdata *dd) 517{ 518 int i, pidx; 519 u32 uctxts; 520 521 /* 522 * Ensure all buffers are free, and fifos empty. Buffers 523 * are common, so only do once for port 0. 524 * 525 * After enable and qib_chg_pioavailkernel so we can safely 526 * enable pioavail updates and PIOENABLE. After this, packets 527 * are ready and able to go out. 528 */ 529 dd->f_sendctrl(dd->pport, QIB_SENDCTRL_DISARM_ALL); 530 for (pidx = 0; pidx < dd->num_pports; ++pidx) 531 dd->f_sendctrl(dd->pport + pidx, QIB_SENDCTRL_FLUSH); 532 533 /* 534 * If not all sendbufs are used, add the one to each of the lower 535 * numbered contexts. pbufsctxt and lastctxt_piobuf are 536 * calculated in chip-specific code because it may cause some 537 * chip-specific adjustments to be made. 538 */ 539 uctxts = dd->cfgctxts - dd->first_user_ctxt; 540 dd->ctxts_extrabuf = dd->pbufsctxt ? 541 dd->lastctxt_piobuf - (dd->pbufsctxt * uctxts) : 0; 542 543 /* 544 * Set up the shadow copies of the piobufavail registers, 545 * which we compare against the chip registers for now, and 546 * the in memory DMA'ed copies of the registers. 547 * By now pioavail updates to memory should have occurred, so 548 * copy them into our working/shadow registers; this is in 549 * case something went wrong with abort, but mostly to get the 550 * initial values of the generation bit correct. 551 */ 552 for (i = 0; i < dd->pioavregs; i++) { 553 __le64 tmp; 554 555 tmp = dd->pioavailregs_dma[i]; 556 /* 557 * Don't need to worry about pioavailkernel here 558 * because we will call qib_chg_pioavailkernel() later 559 * in initialization, to busy out buffers as needed. 560 */ 561 dd->pioavailshadow[i] = le64_to_cpu(tmp); 562 } 563 while (i < ARRAY_SIZE(dd->pioavailshadow)) 564 dd->pioavailshadow[i++] = 0; /* for debugging sanity */ 565 566 /* after pioavailshadow is setup */ 567 qib_chg_pioavailkernel(dd, 0, dd->piobcnt2k + dd->piobcnt4k, 568 TXCHK_CHG_TYPE_KERN, NULL); 569 dd->f_initvl15_bufs(dd); 570} 571 572/** 573 * qib_create_workqueues - create per port workqueues 574 * @dd: the qlogic_ib device 575 */ 576static int qib_create_workqueues(struct qib_devdata *dd) 577{ 578 int pidx; 579 struct qib_pportdata *ppd; 580 581 for (pidx = 0; pidx < dd->num_pports; ++pidx) { 582 ppd = dd->pport + pidx; 583 if (!ppd->qib_wq) { 584 char wq_name[8]; /* 3 + 2 + 1 + 1 + 1 */ 585 586 snprintf(wq_name, sizeof(wq_name), "qib%d_%d", 587 dd->unit, pidx); 588 ppd->qib_wq = alloc_ordered_workqueue(wq_name, 589 WQ_MEM_RECLAIM); 590 if (!ppd->qib_wq) 591 goto wq_error; 592 } 593 } 594 return 0; 595wq_error: 596 pr_err("create_singlethread_workqueue failed for port %d\n", 597 pidx + 1); 598 for (pidx = 0; pidx < dd->num_pports; ++pidx) { 599 ppd = dd->pport + pidx; 600 if (ppd->qib_wq) { 601 destroy_workqueue(ppd->qib_wq); 602 ppd->qib_wq = NULL; 603 } 604 } 605 return -ENOMEM; 606} 607 608static void qib_free_pportdata(struct qib_pportdata *ppd) 609{ 610 free_percpu(ppd->ibport_data.pmastats); 611 free_percpu(ppd->ibport_data.rvp.rc_acks); 612 free_percpu(ppd->ibport_data.rvp.rc_qacks); 613 free_percpu(ppd->ibport_data.rvp.rc_delayed_comp); 614 ppd->ibport_data.pmastats = NULL; 615} 616 617/** 618 * qib_init - do the actual initialization sequence on the chip 619 * @dd: the qlogic_ib device 620 * @reinit: reinitializing, so don't allocate new memory 621 * 622 * Do the actual initialization sequence on the chip. This is done 623 * both from the init routine called from the PCI infrastructure, and 624 * when we reset the chip, or detect that it was reset internally, 625 * or it's administratively re-enabled. 626 * 627 * Memory allocation here and in called routines is only done in 628 * the first case (reinit == 0). We have to be careful, because even 629 * without memory allocation, we need to re-write all the chip registers 630 * TIDs, etc. after the reset or enable has completed. 631 */ 632int qib_init(struct qib_devdata *dd, int reinit) 633{ 634 int ret = 0, pidx, lastfail = 0; 635 u32 portok = 0; 636 unsigned i; 637 struct qib_ctxtdata *rcd; 638 struct qib_pportdata *ppd; 639 unsigned long flags; 640 641 /* Set linkstate to unknown, so we can watch for a transition. */ 642 for (pidx = 0; pidx < dd->num_pports; ++pidx) { 643 ppd = dd->pport + pidx; 644 spin_lock_irqsave(&ppd->lflags_lock, flags); 645 ppd->lflags &= ~(QIBL_LINKACTIVE | QIBL_LINKARMED | 646 QIBL_LINKDOWN | QIBL_LINKINIT | 647 QIBL_LINKV); 648 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 649 } 650 651 if (reinit) 652 ret = init_after_reset(dd); 653 else 654 ret = loadtime_init(dd); 655 if (ret) 656 goto done; 657 658 /* Bypass most chip-init, to get to device creation */ 659 if (qib_mini_init) 660 return 0; 661 662 ret = dd->f_late_initreg(dd); 663 if (ret) 664 goto done; 665 666 /* dd->rcd can be NULL if early init failed */ 667 for (i = 0; dd->rcd && i < dd->first_user_ctxt; ++i) { 668 /* 669 * Set up the (kernel) rcvhdr queue and egr TIDs. If doing 670 * re-init, the simplest way to handle this is to free 671 * existing, and re-allocate. 672 * Need to re-create rest of ctxt 0 ctxtdata as well. 673 */ 674 rcd = dd->rcd[i]; 675 if (!rcd) 676 continue; 677 678 lastfail = qib_create_rcvhdrq(dd, rcd); 679 if (!lastfail) 680 lastfail = qib_setup_eagerbufs(rcd); 681 if (lastfail) 682 qib_dev_err(dd, 683 "failed to allocate kernel ctxt's rcvhdrq and/or egr bufs\n"); 684 } 685 686 for (pidx = 0; pidx < dd->num_pports; ++pidx) { 687 int mtu; 688 689 if (lastfail) 690 ret = lastfail; 691 ppd = dd->pport + pidx; 692 mtu = ib_mtu_enum_to_int(qib_ibmtu); 693 if (mtu == -1) { 694 mtu = QIB_DEFAULT_MTU; 695 qib_ibmtu = 0; /* don't leave invalid value */ 696 } 697 /* set max we can ever have for this driver load */ 698 ppd->init_ibmaxlen = min(mtu > 2048 ? 699 dd->piosize4k : dd->piosize2k, 700 dd->rcvegrbufsize + 701 (dd->rcvhdrentsize << 2)); 702 /* 703 * Have to initialize ibmaxlen, but this will normally 704 * change immediately in qib_set_mtu(). 705 */ 706 ppd->ibmaxlen = ppd->init_ibmaxlen; 707 qib_set_mtu(ppd, mtu); 708 709 spin_lock_irqsave(&ppd->lflags_lock, flags); 710 ppd->lflags |= QIBL_IB_LINK_DISABLED; 711 spin_unlock_irqrestore(&ppd->lflags_lock, flags); 712 713 lastfail = dd->f_bringup_serdes(ppd); 714 if (lastfail) { 715 qib_devinfo(dd->pcidev, 716 "Failed to bringup IB port %u\n", ppd->port); 717 lastfail = -ENETDOWN; 718 continue; 719 } 720 721 portok++; 722 } 723 724 if (!portok) { 725 /* none of the ports initialized */ 726 if (!ret && lastfail) 727 ret = lastfail; 728 else if (!ret) 729 ret = -ENETDOWN; 730 /* but continue on, so we can debug cause */ 731 } 732 733 enable_chip(dd); 734 735 init_piobuf_state(dd); 736 737done: 738 if (!ret) { 739 /* chip is OK for user apps; mark it as initialized */ 740 for (pidx = 0; pidx < dd->num_pports; ++pidx) { 741 ppd = dd->pport + pidx; 742 /* 743 * Set status even if port serdes is not initialized 744 * so that diags will work. 745 */ 746 *ppd->statusp |= QIB_STATUS_CHIP_PRESENT | 747 QIB_STATUS_INITTED; 748 if (!ppd->link_speed_enabled) 749 continue; 750 if (dd->flags & QIB_HAS_SEND_DMA) 751 ret = qib_setup_sdma(ppd); 752 timer_setup(&ppd->hol_timer, qib_hol_event, 0); 753 ppd->hol_state = QIB_HOL_UP; 754 } 755 756 /* now we can enable all interrupts from the chip */ 757 dd->f_set_intr_state(dd, 1); 758 759 /* 760 * Setup to verify we get an interrupt, and fallback 761 * to an alternate if necessary and possible. 762 */ 763 mod_timer(&dd->intrchk_timer, jiffies + HZ/2); 764 /* start stats retrieval timer */ 765 mod_timer(&dd->stats_timer, jiffies + HZ * ACTIVITY_TIMER); 766 } 767 768 /* if ret is non-zero, we probably should do some cleanup here... */ 769 return ret; 770} 771 772/* 773 * These next two routines are placeholders in case we don't have per-arch 774 * code for controlling write combining. If explicit control of write 775 * combining is not available, performance will probably be awful. 776 */ 777 778int __attribute__((weak)) qib_enable_wc(struct qib_devdata *dd) 779{ 780 return -EOPNOTSUPP; 781} 782 783void __attribute__((weak)) qib_disable_wc(struct qib_devdata *dd) 784{ 785} 786 787struct qib_devdata *qib_lookup(int unit) 788{ 789 return xa_load(&qib_dev_table, unit); 790} 791 792/* 793 * Stop the timers during unit shutdown, or after an error late 794 * in initialization. 795 */ 796static void qib_stop_timers(struct qib_devdata *dd) 797{ 798 struct qib_pportdata *ppd; 799 int pidx; 800 801 if (dd->stats_timer.function) 802 del_timer_sync(&dd->stats_timer); 803 if (dd->intrchk_timer.function) 804 del_timer_sync(&dd->intrchk_timer); 805 for (pidx = 0; pidx < dd->num_pports; ++pidx) { 806 ppd = dd->pport + pidx; 807 if (ppd->hol_timer.function) 808 del_timer_sync(&ppd->hol_timer); 809 if (ppd->led_override_timer.function) { 810 del_timer_sync(&ppd->led_override_timer); 811 atomic_set(&ppd->led_override_timer_active, 0); 812 } 813 if (ppd->symerr_clear_timer.function) 814 del_timer_sync(&ppd->symerr_clear_timer); 815 } 816} 817 818/** 819 * qib_shutdown_device - shut down a device 820 * @dd: the qlogic_ib device 821 * 822 * This is called to make the device quiet when we are about to 823 * unload the driver, and also when the device is administratively 824 * disabled. It does not free any data structures. 825 * Everything it does has to be setup again by qib_init(dd, 1) 826 */ 827static void qib_shutdown_device(struct qib_devdata *dd) 828{ 829 struct qib_pportdata *ppd; 830 unsigned pidx; 831 832 if (dd->flags & QIB_SHUTDOWN) 833 return; 834 dd->flags |= QIB_SHUTDOWN; 835 836 for (pidx = 0; pidx < dd->num_pports; ++pidx) { 837 ppd = dd->pport + pidx; 838 839 spin_lock_irq(&ppd->lflags_lock); 840 ppd->lflags &= ~(QIBL_LINKDOWN | QIBL_LINKINIT | 841 QIBL_LINKARMED | QIBL_LINKACTIVE | 842 QIBL_LINKV); 843 spin_unlock_irq(&ppd->lflags_lock); 844 *ppd->statusp &= ~(QIB_STATUS_IB_CONF | QIB_STATUS_IB_READY); 845 } 846 dd->flags &= ~QIB_INITTED; 847 848 /* mask interrupts, but not errors */ 849 dd->f_set_intr_state(dd, 0); 850 851 for (pidx = 0; pidx < dd->num_pports; ++pidx) { 852 ppd = dd->pport + pidx; 853 dd->f_rcvctrl(ppd, QIB_RCVCTRL_TAILUPD_DIS | 854 QIB_RCVCTRL_CTXT_DIS | 855 QIB_RCVCTRL_INTRAVAIL_DIS | 856 QIB_RCVCTRL_PKEY_ENB, -1); 857 /* 858 * Gracefully stop all sends allowing any in progress to 859 * trickle out first. 860 */ 861 dd->f_sendctrl(ppd, QIB_SENDCTRL_CLEAR); 862 } 863 864 /* 865 * Enough for anything that's going to trickle out to have actually 866 * done so. 867 */ 868 udelay(20); 869 870 for (pidx = 0; pidx < dd->num_pports; ++pidx) { 871 ppd = dd->pport + pidx; 872 dd->f_setextled(ppd, 0); /* make sure LEDs are off */ 873 874 if (dd->flags & QIB_HAS_SEND_DMA) 875 qib_teardown_sdma(ppd); 876 877 dd->f_sendctrl(ppd, QIB_SENDCTRL_AVAIL_DIS | 878 QIB_SENDCTRL_SEND_DIS); 879 /* 880 * Clear SerdesEnable. 881 * We can't count on interrupts since we are stopping. 882 */ 883 dd->f_quiet_serdes(ppd); 884 885 if (ppd->qib_wq) { 886 destroy_workqueue(ppd->qib_wq); 887 ppd->qib_wq = NULL; 888 } 889 qib_free_pportdata(ppd); 890 } 891 892} 893 894/** 895 * qib_free_ctxtdata - free a context's allocated data 896 * @dd: the qlogic_ib device 897 * @rcd: the ctxtdata structure 898 * 899 * free up any allocated data for a context 900 * This should not touch anything that would affect a simultaneous 901 * re-allocation of context data, because it is called after qib_mutex 902 * is released (and can be called from reinit as well). 903 * It should never change any chip state, or global driver state. 904 */ 905void qib_free_ctxtdata(struct qib_devdata *dd, struct qib_ctxtdata *rcd) 906{ 907 if (!rcd) 908 return; 909 910 if (rcd->rcvhdrq) { 911 dma_free_coherent(&dd->pcidev->dev, rcd->rcvhdrq_size, 912 rcd->rcvhdrq, rcd->rcvhdrq_phys); 913 rcd->rcvhdrq = NULL; 914 if (rcd->rcvhdrtail_kvaddr) { 915 dma_free_coherent(&dd->pcidev->dev, PAGE_SIZE, 916 rcd->rcvhdrtail_kvaddr, 917 rcd->rcvhdrqtailaddr_phys); 918 rcd->rcvhdrtail_kvaddr = NULL; 919 } 920 } 921 if (rcd->rcvegrbuf) { 922 unsigned e; 923 924 for (e = 0; e < rcd->rcvegrbuf_chunks; e++) { 925 void *base = rcd->rcvegrbuf[e]; 926 size_t size = rcd->rcvegrbuf_size; 927 928 dma_free_coherent(&dd->pcidev->dev, size, 929 base, rcd->rcvegrbuf_phys[e]); 930 } 931 kfree(rcd->rcvegrbuf); 932 rcd->rcvegrbuf = NULL; 933 kfree(rcd->rcvegrbuf_phys); 934 rcd->rcvegrbuf_phys = NULL; 935 rcd->rcvegrbuf_chunks = 0; 936 } 937 938 kfree(rcd->tid_pg_list); 939 vfree(rcd->user_event_mask); 940 vfree(rcd->subctxt_uregbase); 941 vfree(rcd->subctxt_rcvegrbuf); 942 vfree(rcd->subctxt_rcvhdr_base); 943#ifdef CONFIG_DEBUG_FS 944 kfree(rcd->opstats); 945 rcd->opstats = NULL; 946#endif 947 kfree(rcd); 948} 949 950/* 951 * Perform a PIO buffer bandwidth write test, to verify proper system 952 * configuration. Even when all the setup calls work, occasionally 953 * BIOS or other issues can prevent write combining from working, or 954 * can cause other bandwidth problems to the chip. 955 * 956 * This test simply writes the same buffer over and over again, and 957 * measures close to the peak bandwidth to the chip (not testing 958 * data bandwidth to the wire). On chips that use an address-based 959 * trigger to send packets to the wire, this is easy. On chips that 960 * use a count to trigger, we want to make sure that the packet doesn't 961 * go out on the wire, or trigger flow control checks. 962 */ 963static void qib_verify_pioperf(struct qib_devdata *dd) 964{ 965 u32 pbnum, cnt, lcnt; 966 u32 __iomem *piobuf; 967 u32 *addr; 968 u64 msecs, emsecs; 969 970 piobuf = dd->f_getsendbuf(dd->pport, 0ULL, &pbnum); 971 if (!piobuf) { 972 qib_devinfo(dd->pcidev, 973 "No PIObufs for checking perf, skipping\n"); 974 return; 975 } 976 977 /* 978 * Enough to give us a reasonable test, less than piobuf size, and 979 * likely multiple of store buffer length. 980 */ 981 cnt = 1024; 982 983 addr = vmalloc(cnt); 984 if (!addr) 985 goto done; 986 987 preempt_disable(); /* we want reasonably accurate elapsed time */ 988 msecs = 1 + jiffies_to_msecs(jiffies); 989 for (lcnt = 0; lcnt < 10000U; lcnt++) { 990 /* wait until we cross msec boundary */ 991 if (jiffies_to_msecs(jiffies) >= msecs) 992 break; 993 udelay(1); 994 } 995 996 dd->f_set_armlaunch(dd, 0); 997 998 /* 999 * length 0, no dwords actually sent 1000 */ 1001 writeq(0, piobuf); 1002 qib_flush_wc(); 1003 1004 /* 1005 * This is only roughly accurate, since even with preempt we 1006 * still take interrupts that could take a while. Running for 1007 * >= 5 msec seems to get us "close enough" to accurate values. 1008 */ 1009 msecs = jiffies_to_msecs(jiffies); 1010 for (emsecs = lcnt = 0; emsecs <= 5UL; lcnt++) { 1011 qib_pio_copy(piobuf + 64, addr, cnt >> 2); 1012 emsecs = jiffies_to_msecs(jiffies) - msecs; 1013 } 1014 1015 /* 1 GiB/sec, slightly over IB SDR line rate */ 1016 if (lcnt < (emsecs * 1024U)) 1017 qib_dev_err(dd, 1018 "Performance problem: bandwidth to PIO buffers is only %u MiB/sec\n", 1019 lcnt / (u32) emsecs); 1020 1021 preempt_enable(); 1022 1023 vfree(addr); 1024 1025done: 1026 /* disarm piobuf, so it's available again */ 1027 dd->f_sendctrl(dd->pport, QIB_SENDCTRL_DISARM_BUF(pbnum)); 1028 qib_sendbuf_done(dd, pbnum); 1029 dd->f_set_armlaunch(dd, 1); 1030} 1031 1032void qib_free_devdata(struct qib_devdata *dd) 1033{ 1034 unsigned long flags; 1035 1036 xa_lock_irqsave(&qib_dev_table, flags); 1037 __xa_erase(&qib_dev_table, dd->unit); 1038 xa_unlock_irqrestore(&qib_dev_table, flags); 1039 1040#ifdef CONFIG_DEBUG_FS 1041 qib_dbg_ibdev_exit(&dd->verbs_dev); 1042#endif 1043 free_percpu(dd->int_counter); 1044 rvt_dealloc_device(&dd->verbs_dev.rdi); 1045} 1046 1047u64 qib_int_counter(struct qib_devdata *dd) 1048{ 1049 int cpu; 1050 u64 int_counter = 0; 1051 1052 for_each_possible_cpu(cpu) 1053 int_counter += *per_cpu_ptr(dd->int_counter, cpu); 1054 return int_counter; 1055} 1056 1057u64 qib_sps_ints(void) 1058{ 1059 unsigned long index, flags; 1060 struct qib_devdata *dd; 1061 u64 sps_ints = 0; 1062 1063 xa_lock_irqsave(&qib_dev_table, flags); 1064 xa_for_each(&qib_dev_table, index, dd) { 1065 sps_ints += qib_int_counter(dd); 1066 } 1067 xa_unlock_irqrestore(&qib_dev_table, flags); 1068 return sps_ints; 1069} 1070 1071/* 1072 * Allocate our primary per-unit data structure. Must be done via verbs 1073 * allocator, because the verbs cleanup process both does cleanup and 1074 * free of the data structure. 1075 * "extra" is for chip-specific data. 1076 */ 1077struct qib_devdata *qib_alloc_devdata(struct pci_dev *pdev, size_t extra) 1078{ 1079 struct qib_devdata *dd; 1080 int ret, nports; 1081 1082 /* extra is * number of ports */ 1083 nports = extra / sizeof(struct qib_pportdata); 1084 dd = (struct qib_devdata *)rvt_alloc_device(sizeof(*dd) + extra, 1085 nports); 1086 if (!dd) 1087 return ERR_PTR(-ENOMEM); 1088 1089 ret = xa_alloc_irq(&qib_dev_table, &dd->unit, dd, xa_limit_32b, 1090 GFP_KERNEL); 1091 if (ret < 0) { 1092 qib_early_err(&pdev->dev, 1093 "Could not allocate unit ID: error %d\n", -ret); 1094 goto bail; 1095 } 1096 rvt_set_ibdev_name(&dd->verbs_dev.rdi, "%s%d", "qib", dd->unit); 1097 1098 dd->int_counter = alloc_percpu(u64); 1099 if (!dd->int_counter) { 1100 ret = -ENOMEM; 1101 qib_early_err(&pdev->dev, 1102 "Could not allocate per-cpu int_counter\n"); 1103 goto bail; 1104 } 1105 1106 if (!qib_cpulist_count) { 1107 u32 count = num_online_cpus(); 1108 1109 qib_cpulist = bitmap_zalloc(count, GFP_KERNEL); 1110 if (qib_cpulist) 1111 qib_cpulist_count = count; 1112 } 1113#ifdef CONFIG_DEBUG_FS 1114 qib_dbg_ibdev_init(&dd->verbs_dev); 1115#endif 1116 return dd; 1117bail: 1118 if (!list_empty(&dd->list)) 1119 list_del_init(&dd->list); 1120 rvt_dealloc_device(&dd->verbs_dev.rdi); 1121 return ERR_PTR(ret); 1122} 1123 1124/* 1125 * Called from freeze mode handlers, and from PCI error 1126 * reporting code. Should be paranoid about state of 1127 * system and data structures. 1128 */ 1129void qib_disable_after_error(struct qib_devdata *dd) 1130{ 1131 if (dd->flags & QIB_INITTED) { 1132 u32 pidx; 1133 1134 dd->flags &= ~QIB_INITTED; 1135 if (dd->pport) 1136 for (pidx = 0; pidx < dd->num_pports; ++pidx) { 1137 struct qib_pportdata *ppd; 1138 1139 ppd = dd->pport + pidx; 1140 if (dd->flags & QIB_PRESENT) { 1141 qib_set_linkstate(ppd, 1142 QIB_IB_LINKDOWN_DISABLE); 1143 dd->f_setextled(ppd, 0); 1144 } 1145 *ppd->statusp &= ~QIB_STATUS_IB_READY; 1146 } 1147 } 1148 1149 /* 1150 * Mark as having had an error for driver, and also 1151 * for /sys and status word mapped to user programs. 1152 * This marks unit as not usable, until reset. 1153 */ 1154 if (dd->devstatusp) 1155 *dd->devstatusp |= QIB_STATUS_HWERROR; 1156} 1157 1158static void qib_remove_one(struct pci_dev *); 1159static int qib_init_one(struct pci_dev *, const struct pci_device_id *); 1160static void qib_shutdown_one(struct pci_dev *); 1161 1162#define DRIVER_LOAD_MSG "Intel " QIB_DRV_NAME " loaded: " 1163#define PFX QIB_DRV_NAME ": " 1164 1165static const struct pci_device_id qib_pci_tbl[] = { 1166 { PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE, PCI_DEVICE_ID_QLOGIC_IB_6120) }, 1167 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_IB_7220) }, 1168 { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_IB_7322) }, 1169 { 0, } 1170}; 1171 1172MODULE_DEVICE_TABLE(pci, qib_pci_tbl); 1173 1174static struct pci_driver qib_driver = { 1175 .name = QIB_DRV_NAME, 1176 .probe = qib_init_one, 1177 .remove = qib_remove_one, 1178 .shutdown = qib_shutdown_one, 1179 .id_table = qib_pci_tbl, 1180 .err_handler = &qib_pci_err_handler, 1181}; 1182 1183#ifdef CONFIG_INFINIBAND_QIB_DCA 1184 1185static int qib_notify_dca(struct notifier_block *, unsigned long, void *); 1186static struct notifier_block dca_notifier = { 1187 .notifier_call = qib_notify_dca, 1188 .next = NULL, 1189 .priority = 0 1190}; 1191 1192static int qib_notify_dca_device(struct device *device, void *data) 1193{ 1194 struct qib_devdata *dd = dev_get_drvdata(device); 1195 unsigned long event = *(unsigned long *)data; 1196 1197 return dd->f_notify_dca(dd, event); 1198} 1199 1200static int qib_notify_dca(struct notifier_block *nb, unsigned long event, 1201 void *p) 1202{ 1203 int rval; 1204 1205 rval = driver_for_each_device(&qib_driver.driver, NULL, 1206 &event, qib_notify_dca_device); 1207 return rval ? NOTIFY_BAD : NOTIFY_DONE; 1208} 1209 1210#endif 1211 1212/* 1213 * Do all the generic driver unit- and chip-independent memory 1214 * allocation and initialization. 1215 */ 1216static int __init qib_ib_init(void) 1217{ 1218 int ret; 1219 1220 ret = qib_dev_init(); 1221 if (ret) 1222 goto bail; 1223 1224 /* 1225 * These must be called before the driver is registered with 1226 * the PCI subsystem. 1227 */ 1228#ifdef CONFIG_INFINIBAND_QIB_DCA 1229 dca_register_notify(&dca_notifier); 1230#endif 1231#ifdef CONFIG_DEBUG_FS 1232 qib_dbg_init(); 1233#endif 1234 ret = pci_register_driver(&qib_driver); 1235 if (ret < 0) { 1236 pr_err("Unable to register driver: error %d\n", -ret); 1237 goto bail_dev; 1238 } 1239 1240 /* not fatal if it doesn't work */ 1241 if (qib_init_qibfs()) 1242 pr_err("Unable to register ipathfs\n"); 1243 goto bail; /* all OK */ 1244 1245bail_dev: 1246#ifdef CONFIG_INFINIBAND_QIB_DCA 1247 dca_unregister_notify(&dca_notifier); 1248#endif 1249#ifdef CONFIG_DEBUG_FS 1250 qib_dbg_exit(); 1251#endif 1252 qib_dev_cleanup(); 1253bail: 1254 return ret; 1255} 1256 1257module_init(qib_ib_init); 1258 1259/* 1260 * Do the non-unit driver cleanup, memory free, etc. at unload. 1261 */ 1262static void __exit qib_ib_cleanup(void) 1263{ 1264 int ret; 1265 1266 ret = qib_exit_qibfs(); 1267 if (ret) 1268 pr_err( 1269 "Unable to cleanup counter filesystem: error %d\n", 1270 -ret); 1271 1272#ifdef CONFIG_INFINIBAND_QIB_DCA 1273 dca_unregister_notify(&dca_notifier); 1274#endif 1275 pci_unregister_driver(&qib_driver); 1276#ifdef CONFIG_DEBUG_FS 1277 qib_dbg_exit(); 1278#endif 1279 1280 qib_cpulist_count = 0; 1281 bitmap_free(qib_cpulist); 1282 1283 WARN_ON(!xa_empty(&qib_dev_table)); 1284 qib_dev_cleanup(); 1285} 1286 1287module_exit(qib_ib_cleanup); 1288 1289/* this can only be called after a successful initialization */ 1290static void cleanup_device_data(struct qib_devdata *dd) 1291{ 1292 int ctxt; 1293 int pidx; 1294 struct qib_ctxtdata **tmp; 1295 unsigned long flags; 1296 1297 /* users can't do anything more with chip */ 1298 for (pidx = 0; pidx < dd->num_pports; ++pidx) { 1299 if (dd->pport[pidx].statusp) 1300 *dd->pport[pidx].statusp &= ~QIB_STATUS_CHIP_PRESENT; 1301 1302 spin_lock(&dd->pport[pidx].cc_shadow_lock); 1303 1304 kfree(dd->pport[pidx].congestion_entries); 1305 dd->pport[pidx].congestion_entries = NULL; 1306 kfree(dd->pport[pidx].ccti_entries); 1307 dd->pport[pidx].ccti_entries = NULL; 1308 kfree(dd->pport[pidx].ccti_entries_shadow); 1309 dd->pport[pidx].ccti_entries_shadow = NULL; 1310 kfree(dd->pport[pidx].congestion_entries_shadow); 1311 dd->pport[pidx].congestion_entries_shadow = NULL; 1312 1313 spin_unlock(&dd->pport[pidx].cc_shadow_lock); 1314 } 1315 1316 qib_disable_wc(dd); 1317 1318 if (dd->pioavailregs_dma) { 1319 dma_free_coherent(&dd->pcidev->dev, PAGE_SIZE, 1320 (void *) dd->pioavailregs_dma, 1321 dd->pioavailregs_phys); 1322 dd->pioavailregs_dma = NULL; 1323 } 1324 1325 if (dd->pageshadow) { 1326 struct page **tmpp = dd->pageshadow; 1327 dma_addr_t *tmpd = dd->physshadow; 1328 int i; 1329 1330 for (ctxt = 0; ctxt < dd->cfgctxts; ctxt++) { 1331 int ctxt_tidbase = ctxt * dd->rcvtidcnt; 1332 int maxtid = ctxt_tidbase + dd->rcvtidcnt; 1333 1334 for (i = ctxt_tidbase; i < maxtid; i++) { 1335 if (!tmpp[i]) 1336 continue; 1337 dma_unmap_page(&dd->pcidev->dev, tmpd[i], 1338 PAGE_SIZE, DMA_FROM_DEVICE); 1339 qib_release_user_pages(&tmpp[i], 1); 1340 tmpp[i] = NULL; 1341 } 1342 } 1343 1344 dd->pageshadow = NULL; 1345 vfree(tmpp); 1346 dd->physshadow = NULL; 1347 vfree(tmpd); 1348 } 1349 1350 /* 1351 * Free any resources still in use (usually just kernel contexts) 1352 * at unload; we do for ctxtcnt, because that's what we allocate. 1353 * We acquire lock to be really paranoid that rcd isn't being 1354 * accessed from some interrupt-related code (that should not happen, 1355 * but best to be sure). 1356 */ 1357 spin_lock_irqsave(&dd->uctxt_lock, flags); 1358 tmp = dd->rcd; 1359 dd->rcd = NULL; 1360 spin_unlock_irqrestore(&dd->uctxt_lock, flags); 1361 for (ctxt = 0; tmp && ctxt < dd->ctxtcnt; ctxt++) { 1362 struct qib_ctxtdata *rcd = tmp[ctxt]; 1363 1364 tmp[ctxt] = NULL; /* debugging paranoia */ 1365 qib_free_ctxtdata(dd, rcd); 1366 } 1367 kfree(tmp); 1368} 1369 1370/* 1371 * Clean up on unit shutdown, or error during unit load after 1372 * successful initialization. 1373 */ 1374static void qib_postinit_cleanup(struct qib_devdata *dd) 1375{ 1376 /* 1377 * Clean up chip-specific stuff. 1378 * We check for NULL here, because it's outside 1379 * the kregbase check, and we need to call it 1380 * after the free_irq. Thus it's possible that 1381 * the function pointers were never initialized. 1382 */ 1383 if (dd->f_cleanup) 1384 dd->f_cleanup(dd); 1385 1386 qib_pcie_ddcleanup(dd); 1387 1388 cleanup_device_data(dd); 1389 1390 qib_free_devdata(dd); 1391} 1392 1393static int qib_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) 1394{ 1395 int ret, j, pidx, initfail; 1396 struct qib_devdata *dd = NULL; 1397 1398 ret = qib_pcie_init(pdev, ent); 1399 if (ret) 1400 goto bail; 1401 1402 /* 1403 * Do device-specific initialiation, function table setup, dd 1404 * allocation, etc. 1405 */ 1406 switch (ent->device) { 1407 case PCI_DEVICE_ID_QLOGIC_IB_6120: 1408#ifdef CONFIG_PCI_MSI 1409 dd = qib_init_iba6120_funcs(pdev, ent); 1410#else 1411 qib_early_err(&pdev->dev, 1412 "Intel PCIE device 0x%x cannot work if CONFIG_PCI_MSI is not enabled\n", 1413 ent->device); 1414 dd = ERR_PTR(-ENODEV); 1415#endif 1416 break; 1417 1418 case PCI_DEVICE_ID_QLOGIC_IB_7220: 1419 dd = qib_init_iba7220_funcs(pdev, ent); 1420 break; 1421 1422 case PCI_DEVICE_ID_QLOGIC_IB_7322: 1423 dd = qib_init_iba7322_funcs(pdev, ent); 1424 break; 1425 1426 default: 1427 qib_early_err(&pdev->dev, 1428 "Failing on unknown Intel deviceid 0x%x\n", 1429 ent->device); 1430 ret = -ENODEV; 1431 } 1432 1433 if (IS_ERR(dd)) 1434 ret = PTR_ERR(dd); 1435 if (ret) 1436 goto bail; /* error already printed */ 1437 1438 ret = qib_create_workqueues(dd); 1439 if (ret) 1440 goto bail; 1441 1442 /* do the generic initialization */ 1443 initfail = qib_init(dd, 0); 1444 1445 ret = qib_register_ib_device(dd); 1446 1447 /* 1448 * Now ready for use. this should be cleared whenever we 1449 * detect a reset, or initiate one. If earlier failure, 1450 * we still create devices, so diags, etc. can be used 1451 * to determine cause of problem. 1452 */ 1453 if (!qib_mini_init && !initfail && !ret) 1454 dd->flags |= QIB_INITTED; 1455 1456 j = qib_device_create(dd); 1457 if (j) 1458 qib_dev_err(dd, "Failed to create /dev devices: %d\n", -j); 1459 j = qibfs_add(dd); 1460 if (j) 1461 qib_dev_err(dd, "Failed filesystem setup for counters: %d\n", 1462 -j); 1463 1464 if (qib_mini_init || initfail || ret) { 1465 qib_stop_timers(dd); 1466 flush_workqueue(ib_wq); 1467 for (pidx = 0; pidx < dd->num_pports; ++pidx) 1468 dd->f_quiet_serdes(dd->pport + pidx); 1469 if (qib_mini_init) 1470 goto bail; 1471 if (!j) { 1472 (void) qibfs_remove(dd); 1473 qib_device_remove(dd); 1474 } 1475 if (!ret) 1476 qib_unregister_ib_device(dd); 1477 qib_postinit_cleanup(dd); 1478 if (initfail) 1479 ret = initfail; 1480 goto bail; 1481 } 1482 1483 ret = qib_enable_wc(dd); 1484 if (ret) { 1485 qib_dev_err(dd, 1486 "Write combining not enabled (err %d): performance may be poor\n", 1487 -ret); 1488 ret = 0; 1489 } 1490 1491 qib_verify_pioperf(dd); 1492bail: 1493 return ret; 1494} 1495 1496static void qib_remove_one(struct pci_dev *pdev) 1497{ 1498 struct qib_devdata *dd = pci_get_drvdata(pdev); 1499 int ret; 1500 1501 /* unregister from IB core */ 1502 qib_unregister_ib_device(dd); 1503 1504 /* 1505 * Disable the IB link, disable interrupts on the device, 1506 * clear dma engines, etc. 1507 */ 1508 if (!qib_mini_init) 1509 qib_shutdown_device(dd); 1510 1511 qib_stop_timers(dd); 1512 1513 /* wait until all of our (qsfp) queue_work() calls complete */ 1514 flush_workqueue(ib_wq); 1515 1516 ret = qibfs_remove(dd); 1517 if (ret) 1518 qib_dev_err(dd, "Failed counters filesystem cleanup: %d\n", 1519 -ret); 1520 1521 qib_device_remove(dd); 1522 1523 qib_postinit_cleanup(dd); 1524} 1525 1526static void qib_shutdown_one(struct pci_dev *pdev) 1527{ 1528 struct qib_devdata *dd = pci_get_drvdata(pdev); 1529 1530 qib_shutdown_device(dd); 1531} 1532 1533/** 1534 * qib_create_rcvhdrq - create a receive header queue 1535 * @dd: the qlogic_ib device 1536 * @rcd: the context data 1537 * 1538 * This must be contiguous memory (from an i/o perspective), and must be 1539 * DMA'able (which means for some systems, it will go through an IOMMU, 1540 * or be forced into a low address range). 1541 */ 1542int qib_create_rcvhdrq(struct qib_devdata *dd, struct qib_ctxtdata *rcd) 1543{ 1544 unsigned amt; 1545 int old_node_id; 1546 1547 if (!rcd->rcvhdrq) { 1548 dma_addr_t phys_hdrqtail; 1549 1550 amt = ALIGN(dd->rcvhdrcnt * dd->rcvhdrentsize * 1551 sizeof(u32), PAGE_SIZE); 1552 1553 old_node_id = dev_to_node(&dd->pcidev->dev); 1554 set_dev_node(&dd->pcidev->dev, rcd->node_id); 1555 rcd->rcvhdrq = dma_alloc_coherent(&dd->pcidev->dev, amt, 1556 &rcd->rcvhdrq_phys, GFP_KERNEL); 1557 set_dev_node(&dd->pcidev->dev, old_node_id); 1558 1559 if (!rcd->rcvhdrq) { 1560 qib_dev_err(dd, 1561 "attempt to allocate %d bytes for ctxt %u rcvhdrq failed\n", 1562 amt, rcd->ctxt); 1563 goto bail; 1564 } 1565 1566 if (rcd->ctxt >= dd->first_user_ctxt) { 1567 rcd->user_event_mask = vmalloc_user(PAGE_SIZE); 1568 if (!rcd->user_event_mask) 1569 goto bail_free_hdrq; 1570 } 1571 1572 if (!(dd->flags & QIB_NODMA_RTAIL)) { 1573 set_dev_node(&dd->pcidev->dev, rcd->node_id); 1574 rcd->rcvhdrtail_kvaddr = dma_alloc_coherent( 1575 &dd->pcidev->dev, PAGE_SIZE, &phys_hdrqtail, 1576 GFP_KERNEL); 1577 set_dev_node(&dd->pcidev->dev, old_node_id); 1578 if (!rcd->rcvhdrtail_kvaddr) 1579 goto bail_free; 1580 rcd->rcvhdrqtailaddr_phys = phys_hdrqtail; 1581 } 1582 1583 rcd->rcvhdrq_size = amt; 1584 } 1585 1586 /* clear for security and sanity on each use */ 1587 memset(rcd->rcvhdrq, 0, rcd->rcvhdrq_size); 1588 if (rcd->rcvhdrtail_kvaddr) 1589 memset(rcd->rcvhdrtail_kvaddr, 0, PAGE_SIZE); 1590 return 0; 1591 1592bail_free: 1593 qib_dev_err(dd, 1594 "attempt to allocate 1 page for ctxt %u rcvhdrqtailaddr failed\n", 1595 rcd->ctxt); 1596 vfree(rcd->user_event_mask); 1597 rcd->user_event_mask = NULL; 1598bail_free_hdrq: 1599 dma_free_coherent(&dd->pcidev->dev, amt, rcd->rcvhdrq, 1600 rcd->rcvhdrq_phys); 1601 rcd->rcvhdrq = NULL; 1602bail: 1603 return -ENOMEM; 1604} 1605 1606/** 1607 * qib_setup_eagerbufs - allocate eager buffers, both kernel and user contexts. 1608 * @rcd: the context we are setting up. 1609 * 1610 * Allocate the eager TID buffers and program them into hip. 1611 * They are no longer completely contiguous, we do multiple allocation 1612 * calls. Otherwise we get the OOM code involved, by asking for too 1613 * much per call, with disastrous results on some kernels. 1614 */ 1615int qib_setup_eagerbufs(struct qib_ctxtdata *rcd) 1616{ 1617 struct qib_devdata *dd = rcd->dd; 1618 unsigned e, egrcnt, egrperchunk, chunk, egrsize, egroff; 1619 size_t size; 1620 int old_node_id; 1621 1622 egrcnt = rcd->rcvegrcnt; 1623 egroff = rcd->rcvegr_tid_base; 1624 egrsize = dd->rcvegrbufsize; 1625 1626 chunk = rcd->rcvegrbuf_chunks; 1627 egrperchunk = rcd->rcvegrbufs_perchunk; 1628 size = rcd->rcvegrbuf_size; 1629 if (!rcd->rcvegrbuf) { 1630 rcd->rcvegrbuf = 1631 kcalloc_node(chunk, sizeof(rcd->rcvegrbuf[0]), 1632 GFP_KERNEL, rcd->node_id); 1633 if (!rcd->rcvegrbuf) 1634 goto bail; 1635 } 1636 if (!rcd->rcvegrbuf_phys) { 1637 rcd->rcvegrbuf_phys = 1638 kmalloc_array_node(chunk, 1639 sizeof(rcd->rcvegrbuf_phys[0]), 1640 GFP_KERNEL, rcd->node_id); 1641 if (!rcd->rcvegrbuf_phys) 1642 goto bail_rcvegrbuf; 1643 } 1644 for (e = 0; e < rcd->rcvegrbuf_chunks; e++) { 1645 if (rcd->rcvegrbuf[e]) 1646 continue; 1647 1648 old_node_id = dev_to_node(&dd->pcidev->dev); 1649 set_dev_node(&dd->pcidev->dev, rcd->node_id); 1650 rcd->rcvegrbuf[e] = 1651 dma_alloc_coherent(&dd->pcidev->dev, size, 1652 &rcd->rcvegrbuf_phys[e], 1653 GFP_KERNEL); 1654 set_dev_node(&dd->pcidev->dev, old_node_id); 1655 if (!rcd->rcvegrbuf[e]) 1656 goto bail_rcvegrbuf_phys; 1657 } 1658 1659 rcd->rcvegr_phys = rcd->rcvegrbuf_phys[0]; 1660 1661 for (e = chunk = 0; chunk < rcd->rcvegrbuf_chunks; chunk++) { 1662 dma_addr_t pa = rcd->rcvegrbuf_phys[chunk]; 1663 unsigned i; 1664 1665 /* clear for security and sanity on each use */ 1666 memset(rcd->rcvegrbuf[chunk], 0, size); 1667 1668 for (i = 0; e < egrcnt && i < egrperchunk; e++, i++) { 1669 dd->f_put_tid(dd, e + egroff + 1670 (u64 __iomem *) 1671 ((char __iomem *) 1672 dd->kregbase + 1673 dd->rcvegrbase), 1674 RCVHQ_RCV_TYPE_EAGER, pa); 1675 pa += egrsize; 1676 } 1677 cond_resched(); /* don't hog the cpu */ 1678 } 1679 1680 return 0; 1681 1682bail_rcvegrbuf_phys: 1683 for (e = 0; e < rcd->rcvegrbuf_chunks && rcd->rcvegrbuf[e]; e++) 1684 dma_free_coherent(&dd->pcidev->dev, size, 1685 rcd->rcvegrbuf[e], rcd->rcvegrbuf_phys[e]); 1686 kfree(rcd->rcvegrbuf_phys); 1687 rcd->rcvegrbuf_phys = NULL; 1688bail_rcvegrbuf: 1689 kfree(rcd->rcvegrbuf); 1690 rcd->rcvegrbuf = NULL; 1691bail: 1692 return -ENOMEM; 1693} 1694 1695/* 1696 * Note: Changes to this routine should be mirrored 1697 * for the diagnostics routine qib_remap_ioaddr32(). 1698 * There is also related code for VL15 buffers in qib_init_7322_variables(). 1699 * The teardown code that unmaps is in qib_pcie_ddcleanup() 1700 */ 1701int init_chip_wc_pat(struct qib_devdata *dd, u32 vl15buflen) 1702{ 1703 u64 __iomem *qib_kregbase = NULL; 1704 void __iomem *qib_piobase = NULL; 1705 u64 __iomem *qib_userbase = NULL; 1706 u64 qib_kreglen; 1707 u64 qib_pio2koffset = dd->piobufbase & 0xffffffff; 1708 u64 qib_pio4koffset = dd->piobufbase >> 32; 1709 u64 qib_pio2klen = dd->piobcnt2k * dd->palign; 1710 u64 qib_pio4klen = dd->piobcnt4k * dd->align4k; 1711 u64 qib_physaddr = dd->physaddr; 1712 u64 qib_piolen; 1713 u64 qib_userlen = 0; 1714 1715 /* 1716 * Free the old mapping because the kernel will try to reuse the 1717 * old mapping and not create a new mapping with the 1718 * write combining attribute. 1719 */ 1720 iounmap(dd->kregbase); 1721 dd->kregbase = NULL; 1722 1723 /* 1724 * Assumes chip address space looks like: 1725 * - kregs + sregs + cregs + uregs (in any order) 1726 * - piobufs (2K and 4K bufs in either order) 1727 * or: 1728 * - kregs + sregs + cregs (in any order) 1729 * - piobufs (2K and 4K bufs in either order) 1730 * - uregs 1731 */ 1732 if (dd->piobcnt4k == 0) { 1733 qib_kreglen = qib_pio2koffset; 1734 qib_piolen = qib_pio2klen; 1735 } else if (qib_pio2koffset < qib_pio4koffset) { 1736 qib_kreglen = qib_pio2koffset; 1737 qib_piolen = qib_pio4koffset + qib_pio4klen - qib_kreglen; 1738 } else { 1739 qib_kreglen = qib_pio4koffset; 1740 qib_piolen = qib_pio2koffset + qib_pio2klen - qib_kreglen; 1741 } 1742 qib_piolen += vl15buflen; 1743 /* Map just the configured ports (not all hw ports) */ 1744 if (dd->uregbase > qib_kreglen) 1745 qib_userlen = dd->ureg_align * dd->cfgctxts; 1746 1747 /* Sanity checks passed, now create the new mappings */ 1748 qib_kregbase = ioremap(qib_physaddr, qib_kreglen); 1749 if (!qib_kregbase) 1750 goto bail; 1751 1752 qib_piobase = ioremap_wc(qib_physaddr + qib_kreglen, qib_piolen); 1753 if (!qib_piobase) 1754 goto bail_kregbase; 1755 1756 if (qib_userlen) { 1757 qib_userbase = ioremap(qib_physaddr + dd->uregbase, 1758 qib_userlen); 1759 if (!qib_userbase) 1760 goto bail_piobase; 1761 } 1762 1763 dd->kregbase = qib_kregbase; 1764 dd->kregend = (u64 __iomem *) 1765 ((char __iomem *) qib_kregbase + qib_kreglen); 1766 dd->piobase = qib_piobase; 1767 dd->pio2kbase = (void __iomem *) 1768 (((char __iomem *) dd->piobase) + 1769 qib_pio2koffset - qib_kreglen); 1770 if (dd->piobcnt4k) 1771 dd->pio4kbase = (void __iomem *) 1772 (((char __iomem *) dd->piobase) + 1773 qib_pio4koffset - qib_kreglen); 1774 if (qib_userlen) 1775 /* ureg will now be accessed relative to dd->userbase */ 1776 dd->userbase = qib_userbase; 1777 return 0; 1778 1779bail_piobase: 1780 iounmap(qib_piobase); 1781bail_kregbase: 1782 iounmap(qib_kregbase); 1783bail: 1784 return -ENOMEM; 1785} 1786