1// SPDX-License-Identifier: GPL-2.0-or-later 2/* 3 * X-Gene SLIMpro I2C Driver 4 * 5 * Copyright (c) 2014, Applied Micro Circuits Corporation 6 * Author: Feng Kan <fkan@apm.com> 7 * Author: Hieu Le <hnle@apm.com> 8 * 9 * This driver provides support for X-Gene SLIMpro I2C device access 10 * using the APM X-Gene SLIMpro mailbox driver. 11 */ 12#include <acpi/pcc.h> 13#include <linux/acpi.h> 14#include <linux/dma-mapping.h> 15#include <linux/i2c.h> 16#include <linux/interrupt.h> 17#include <linux/io.h> 18#include <linux/mailbox_client.h> 19#include <linux/module.h> 20#include <linux/of.h> 21#include <linux/platform_device.h> 22 23#define MAILBOX_OP_TIMEOUT 1000 /* Operation time out in ms */ 24#define MAILBOX_I2C_INDEX 0 25#define SLIMPRO_IIC_BUS 1 /* Use I2C bus 1 only */ 26 27#define SMBUS_CMD_LEN 1 28#define BYTE_DATA 1 29#define WORD_DATA 2 30#define BLOCK_DATA 3 31 32#define SLIMPRO_IIC_I2C_PROTOCOL 0 33#define SLIMPRO_IIC_SMB_PROTOCOL 1 34 35#define SLIMPRO_IIC_READ 0 36#define SLIMPRO_IIC_WRITE 1 37 38#define IIC_SMB_WITHOUT_DATA_LEN 0 39#define IIC_SMB_WITH_DATA_LEN 1 40 41#define SLIMPRO_DEBUG_MSG 0 42#define SLIMPRO_MSG_TYPE_SHIFT 28 43#define SLIMPRO_DBG_SUBTYPE_I2C1READ 4 44#define SLIMPRO_DBGMSG_TYPE_SHIFT 24 45#define SLIMPRO_DBGMSG_TYPE_MASK 0x0F000000U 46#define SLIMPRO_IIC_DEV_SHIFT 23 47#define SLIMPRO_IIC_DEV_MASK 0x00800000U 48#define SLIMPRO_IIC_DEVID_SHIFT 13 49#define SLIMPRO_IIC_DEVID_MASK 0x007FE000U 50#define SLIMPRO_IIC_RW_SHIFT 12 51#define SLIMPRO_IIC_RW_MASK 0x00001000U 52#define SLIMPRO_IIC_PROTO_SHIFT 11 53#define SLIMPRO_IIC_PROTO_MASK 0x00000800U 54#define SLIMPRO_IIC_ADDRLEN_SHIFT 8 55#define SLIMPRO_IIC_ADDRLEN_MASK 0x00000700U 56#define SLIMPRO_IIC_DATALEN_SHIFT 0 57#define SLIMPRO_IIC_DATALEN_MASK 0x000000FFU 58 59/* 60 * SLIMpro I2C message encode 61 * 62 * dev - Controller number (0-based) 63 * chip - I2C chip address 64 * op - SLIMPRO_IIC_READ or SLIMPRO_IIC_WRITE 65 * proto - SLIMPRO_IIC_SMB_PROTOCOL or SLIMPRO_IIC_I2C_PROTOCOL 66 * addrlen - Length of the address field 67 * datalen - Length of the data field 68 */ 69#define SLIMPRO_IIC_ENCODE_MSG(dev, chip, op, proto, addrlen, datalen) \ 70 ((SLIMPRO_DEBUG_MSG << SLIMPRO_MSG_TYPE_SHIFT) | \ 71 ((SLIMPRO_DBG_SUBTYPE_I2C1READ << SLIMPRO_DBGMSG_TYPE_SHIFT) & \ 72 SLIMPRO_DBGMSG_TYPE_MASK) | \ 73 ((dev << SLIMPRO_IIC_DEV_SHIFT) & SLIMPRO_IIC_DEV_MASK) | \ 74 ((chip << SLIMPRO_IIC_DEVID_SHIFT) & SLIMPRO_IIC_DEVID_MASK) | \ 75 ((op << SLIMPRO_IIC_RW_SHIFT) & SLIMPRO_IIC_RW_MASK) | \ 76 ((proto << SLIMPRO_IIC_PROTO_SHIFT) & SLIMPRO_IIC_PROTO_MASK) | \ 77 ((addrlen << SLIMPRO_IIC_ADDRLEN_SHIFT) & SLIMPRO_IIC_ADDRLEN_MASK) | \ 78 ((datalen << SLIMPRO_IIC_DATALEN_SHIFT) & SLIMPRO_IIC_DATALEN_MASK)) 79 80#define SLIMPRO_MSG_TYPE(v) (((v) & 0xF0000000) >> 28) 81 82/* 83 * Encode for upper address for block data 84 */ 85#define SLIMPRO_IIC_ENCODE_FLAG_BUFADDR 0x80000000 86#define SLIMPRO_IIC_ENCODE_FLAG_WITH_DATA_LEN(a) ((u32) (((a) << 30) \ 87 & 0x40000000)) 88#define SLIMPRO_IIC_ENCODE_UPPER_BUFADDR(a) ((u32) (((a) >> 12) \ 89 & 0x3FF00000)) 90#define SLIMPRO_IIC_ENCODE_ADDR(a) ((a) & 0x000FFFFF) 91 92#define SLIMPRO_IIC_MSG_DWORD_COUNT 3 93 94/* PCC related defines */ 95#define PCC_SIGNATURE 0x50424300 96#define PCC_STS_CMD_COMPLETE BIT(0) 97#define PCC_STS_SCI_DOORBELL BIT(1) 98#define PCC_STS_ERR BIT(2) 99#define PCC_STS_PLAT_NOTIFY BIT(3) 100#define PCC_CMD_GENERATE_DB_INT BIT(15) 101 102struct slimpro_i2c_dev { 103 struct i2c_adapter adapter; 104 struct device *dev; 105 struct mbox_chan *mbox_chan; 106 struct pcc_mbox_chan *pcc_chan; 107 struct mbox_client mbox_client; 108 int mbox_idx; 109 struct completion rd_complete; 110 u8 dma_buffer[I2C_SMBUS_BLOCK_MAX + 1]; /* dma_buffer[0] is used for length */ 111 u32 *resp_msg; 112 phys_addr_t comm_base_addr; 113 void *pcc_comm_addr; 114}; 115 116#define to_slimpro_i2c_dev(cl) \ 117 container_of(cl, struct slimpro_i2c_dev, mbox_client) 118 119enum slimpro_i2c_version { 120 XGENE_SLIMPRO_I2C_V1 = 0, 121 XGENE_SLIMPRO_I2C_V2 = 1, 122}; 123 124/* 125 * This function tests and clears a bitmask then returns its old value 126 */ 127static u16 xgene_word_tst_and_clr(u16 *addr, u16 mask) 128{ 129 u16 ret, val; 130 131 val = le16_to_cpu(READ_ONCE(*addr)); 132 ret = val & mask; 133 val &= ~mask; 134 WRITE_ONCE(*addr, cpu_to_le16(val)); 135 136 return ret; 137} 138 139static void slimpro_i2c_rx_cb(struct mbox_client *cl, void *mssg) 140{ 141 struct slimpro_i2c_dev *ctx = to_slimpro_i2c_dev(cl); 142 143 /* 144 * Response message format: 145 * mssg[0] is the return code of the operation 146 * mssg[1] is the first data word 147 * mssg[2] is NOT used 148 */ 149 if (ctx->resp_msg) 150 *ctx->resp_msg = ((u32 *)mssg)[1]; 151 152 if (ctx->mbox_client.tx_block) 153 complete(&ctx->rd_complete); 154} 155 156static void slimpro_i2c_pcc_rx_cb(struct mbox_client *cl, void *msg) 157{ 158 struct slimpro_i2c_dev *ctx = to_slimpro_i2c_dev(cl); 159 struct acpi_pcct_shared_memory *generic_comm_base = ctx->pcc_comm_addr; 160 161 /* Check if platform sends interrupt */ 162 if (!xgene_word_tst_and_clr(&generic_comm_base->status, 163 PCC_STS_SCI_DOORBELL)) 164 return; 165 166 if (xgene_word_tst_and_clr(&generic_comm_base->status, 167 PCC_STS_CMD_COMPLETE)) { 168 msg = generic_comm_base + 1; 169 170 /* Response message msg[1] contains the return value. */ 171 if (ctx->resp_msg) 172 *ctx->resp_msg = ((u32 *)msg)[1]; 173 174 complete(&ctx->rd_complete); 175 } 176} 177 178static void slimpro_i2c_pcc_tx_prepare(struct slimpro_i2c_dev *ctx, u32 *msg) 179{ 180 struct acpi_pcct_shared_memory *generic_comm_base = ctx->pcc_comm_addr; 181 u32 *ptr = (void *)(generic_comm_base + 1); 182 u16 status; 183 int i; 184 185 WRITE_ONCE(generic_comm_base->signature, 186 cpu_to_le32(PCC_SIGNATURE | ctx->mbox_idx)); 187 188 WRITE_ONCE(generic_comm_base->command, 189 cpu_to_le16(SLIMPRO_MSG_TYPE(msg[0]) | PCC_CMD_GENERATE_DB_INT)); 190 191 status = le16_to_cpu(READ_ONCE(generic_comm_base->status)); 192 status &= ~PCC_STS_CMD_COMPLETE; 193 WRITE_ONCE(generic_comm_base->status, cpu_to_le16(status)); 194 195 /* Copy the message to the PCC comm space */ 196 for (i = 0; i < SLIMPRO_IIC_MSG_DWORD_COUNT; i++) 197 WRITE_ONCE(ptr[i], cpu_to_le32(msg[i])); 198} 199 200static int start_i2c_msg_xfer(struct slimpro_i2c_dev *ctx) 201{ 202 if (ctx->mbox_client.tx_block || !acpi_disabled) { 203 if (!wait_for_completion_timeout(&ctx->rd_complete, 204 msecs_to_jiffies(MAILBOX_OP_TIMEOUT))) 205 return -ETIMEDOUT; 206 } 207 208 /* Check of invalid data or no device */ 209 if (*ctx->resp_msg == 0xffffffff) 210 return -ENODEV; 211 212 return 0; 213} 214 215static int slimpro_i2c_send_msg(struct slimpro_i2c_dev *ctx, 216 u32 *msg, 217 u32 *data) 218{ 219 int rc; 220 221 ctx->resp_msg = data; 222 223 if (!acpi_disabled) { 224 reinit_completion(&ctx->rd_complete); 225 slimpro_i2c_pcc_tx_prepare(ctx, msg); 226 } 227 228 rc = mbox_send_message(ctx->mbox_chan, msg); 229 if (rc < 0) 230 goto err; 231 232 rc = start_i2c_msg_xfer(ctx); 233 234err: 235 if (!acpi_disabled) 236 mbox_chan_txdone(ctx->mbox_chan, 0); 237 238 ctx->resp_msg = NULL; 239 240 return rc; 241} 242 243static int slimpro_i2c_rd(struct slimpro_i2c_dev *ctx, u32 chip, 244 u32 addr, u32 addrlen, u32 protocol, 245 u32 readlen, u32 *data) 246{ 247 u32 msg[3]; 248 249 msg[0] = SLIMPRO_IIC_ENCODE_MSG(SLIMPRO_IIC_BUS, chip, 250 SLIMPRO_IIC_READ, protocol, addrlen, readlen); 251 msg[1] = SLIMPRO_IIC_ENCODE_ADDR(addr); 252 msg[2] = 0; 253 254 return slimpro_i2c_send_msg(ctx, msg, data); 255} 256 257static int slimpro_i2c_wr(struct slimpro_i2c_dev *ctx, u32 chip, 258 u32 addr, u32 addrlen, u32 protocol, u32 writelen, 259 u32 data) 260{ 261 u32 msg[3]; 262 263 msg[0] = SLIMPRO_IIC_ENCODE_MSG(SLIMPRO_IIC_BUS, chip, 264 SLIMPRO_IIC_WRITE, protocol, addrlen, writelen); 265 msg[1] = SLIMPRO_IIC_ENCODE_ADDR(addr); 266 msg[2] = data; 267 268 return slimpro_i2c_send_msg(ctx, msg, msg); 269} 270 271static int slimpro_i2c_blkrd(struct slimpro_i2c_dev *ctx, u32 chip, u32 addr, 272 u32 addrlen, u32 protocol, u32 readlen, 273 u32 with_data_len, void *data) 274{ 275 dma_addr_t paddr; 276 u32 msg[3]; 277 int rc; 278 279 paddr = dma_map_single(ctx->dev, ctx->dma_buffer, readlen, DMA_FROM_DEVICE); 280 if (dma_mapping_error(ctx->dev, paddr)) { 281 dev_err(&ctx->adapter.dev, "Error in mapping dma buffer %p\n", 282 ctx->dma_buffer); 283 return -ENOMEM; 284 } 285 286 msg[0] = SLIMPRO_IIC_ENCODE_MSG(SLIMPRO_IIC_BUS, chip, SLIMPRO_IIC_READ, 287 protocol, addrlen, readlen); 288 msg[1] = SLIMPRO_IIC_ENCODE_FLAG_BUFADDR | 289 SLIMPRO_IIC_ENCODE_FLAG_WITH_DATA_LEN(with_data_len) | 290 SLIMPRO_IIC_ENCODE_UPPER_BUFADDR(paddr) | 291 SLIMPRO_IIC_ENCODE_ADDR(addr); 292 msg[2] = (u32)paddr; 293 294 rc = slimpro_i2c_send_msg(ctx, msg, msg); 295 296 /* Copy to destination */ 297 memcpy(data, ctx->dma_buffer, readlen); 298 299 dma_unmap_single(ctx->dev, paddr, readlen, DMA_FROM_DEVICE); 300 return rc; 301} 302 303static int slimpro_i2c_blkwr(struct slimpro_i2c_dev *ctx, u32 chip, 304 u32 addr, u32 addrlen, u32 protocol, u32 writelen, 305 void *data) 306{ 307 dma_addr_t paddr; 308 u32 msg[3]; 309 int rc; 310 311 if (writelen > I2C_SMBUS_BLOCK_MAX) 312 return -EINVAL; 313 314 memcpy(ctx->dma_buffer, data, writelen); 315 paddr = dma_map_single(ctx->dev, ctx->dma_buffer, writelen, 316 DMA_TO_DEVICE); 317 if (dma_mapping_error(ctx->dev, paddr)) { 318 dev_err(&ctx->adapter.dev, "Error in mapping dma buffer %p\n", 319 ctx->dma_buffer); 320 return -ENOMEM; 321 } 322 323 msg[0] = SLIMPRO_IIC_ENCODE_MSG(SLIMPRO_IIC_BUS, chip, SLIMPRO_IIC_WRITE, 324 protocol, addrlen, writelen); 325 msg[1] = SLIMPRO_IIC_ENCODE_FLAG_BUFADDR | 326 SLIMPRO_IIC_ENCODE_UPPER_BUFADDR(paddr) | 327 SLIMPRO_IIC_ENCODE_ADDR(addr); 328 msg[2] = (u32)paddr; 329 330 if (ctx->mbox_client.tx_block) 331 reinit_completion(&ctx->rd_complete); 332 333 rc = slimpro_i2c_send_msg(ctx, msg, msg); 334 335 dma_unmap_single(ctx->dev, paddr, writelen, DMA_TO_DEVICE); 336 return rc; 337} 338 339static int xgene_slimpro_i2c_xfer(struct i2c_adapter *adap, u16 addr, 340 unsigned short flags, char read_write, 341 u8 command, int size, 342 union i2c_smbus_data *data) 343{ 344 struct slimpro_i2c_dev *ctx = i2c_get_adapdata(adap); 345 int ret = -EOPNOTSUPP; 346 u32 val; 347 348 switch (size) { 349 case I2C_SMBUS_BYTE: 350 if (read_write == I2C_SMBUS_READ) { 351 ret = slimpro_i2c_rd(ctx, addr, 0, 0, 352 SLIMPRO_IIC_SMB_PROTOCOL, 353 BYTE_DATA, &val); 354 data->byte = val; 355 } else { 356 ret = slimpro_i2c_wr(ctx, addr, command, SMBUS_CMD_LEN, 357 SLIMPRO_IIC_SMB_PROTOCOL, 358 0, 0); 359 } 360 break; 361 case I2C_SMBUS_BYTE_DATA: 362 if (read_write == I2C_SMBUS_READ) { 363 ret = slimpro_i2c_rd(ctx, addr, command, SMBUS_CMD_LEN, 364 SLIMPRO_IIC_SMB_PROTOCOL, 365 BYTE_DATA, &val); 366 data->byte = val; 367 } else { 368 val = data->byte; 369 ret = slimpro_i2c_wr(ctx, addr, command, SMBUS_CMD_LEN, 370 SLIMPRO_IIC_SMB_PROTOCOL, 371 BYTE_DATA, val); 372 } 373 break; 374 case I2C_SMBUS_WORD_DATA: 375 if (read_write == I2C_SMBUS_READ) { 376 ret = slimpro_i2c_rd(ctx, addr, command, SMBUS_CMD_LEN, 377 SLIMPRO_IIC_SMB_PROTOCOL, 378 WORD_DATA, &val); 379 data->word = val; 380 } else { 381 val = data->word; 382 ret = slimpro_i2c_wr(ctx, addr, command, SMBUS_CMD_LEN, 383 SLIMPRO_IIC_SMB_PROTOCOL, 384 WORD_DATA, val); 385 } 386 break; 387 case I2C_SMBUS_BLOCK_DATA: 388 if (read_write == I2C_SMBUS_READ) { 389 ret = slimpro_i2c_blkrd(ctx, addr, command, 390 SMBUS_CMD_LEN, 391 SLIMPRO_IIC_SMB_PROTOCOL, 392 I2C_SMBUS_BLOCK_MAX + 1, 393 IIC_SMB_WITH_DATA_LEN, 394 &data->block[0]); 395 396 } else { 397 ret = slimpro_i2c_blkwr(ctx, addr, command, 398 SMBUS_CMD_LEN, 399 SLIMPRO_IIC_SMB_PROTOCOL, 400 data->block[0] + 1, 401 &data->block[0]); 402 } 403 break; 404 case I2C_SMBUS_I2C_BLOCK_DATA: 405 if (read_write == I2C_SMBUS_READ) { 406 ret = slimpro_i2c_blkrd(ctx, addr, 407 command, 408 SMBUS_CMD_LEN, 409 SLIMPRO_IIC_I2C_PROTOCOL, 410 I2C_SMBUS_BLOCK_MAX, 411 IIC_SMB_WITHOUT_DATA_LEN, 412 &data->block[1]); 413 } else { 414 ret = slimpro_i2c_blkwr(ctx, addr, command, 415 SMBUS_CMD_LEN, 416 SLIMPRO_IIC_I2C_PROTOCOL, 417 data->block[0], 418 &data->block[1]); 419 } 420 break; 421 default: 422 break; 423 } 424 return ret; 425} 426 427/* 428* Return list of supported functionality. 429*/ 430static u32 xgene_slimpro_i2c_func(struct i2c_adapter *adapter) 431{ 432 return I2C_FUNC_SMBUS_BYTE | 433 I2C_FUNC_SMBUS_BYTE_DATA | 434 I2C_FUNC_SMBUS_WORD_DATA | 435 I2C_FUNC_SMBUS_BLOCK_DATA | 436 I2C_FUNC_SMBUS_I2C_BLOCK; 437} 438 439static const struct i2c_algorithm xgene_slimpro_i2c_algorithm = { 440 .smbus_xfer = xgene_slimpro_i2c_xfer, 441 .functionality = xgene_slimpro_i2c_func, 442}; 443 444static int xgene_slimpro_i2c_probe(struct platform_device *pdev) 445{ 446 struct slimpro_i2c_dev *ctx; 447 struct i2c_adapter *adapter; 448 struct mbox_client *cl; 449 int rc; 450 451 ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); 452 if (!ctx) 453 return -ENOMEM; 454 455 ctx->dev = &pdev->dev; 456 platform_set_drvdata(pdev, ctx); 457 cl = &ctx->mbox_client; 458 459 /* Request mailbox channel */ 460 cl->dev = &pdev->dev; 461 init_completion(&ctx->rd_complete); 462 cl->tx_tout = MAILBOX_OP_TIMEOUT; 463 cl->knows_txdone = false; 464 if (acpi_disabled) { 465 cl->tx_block = true; 466 cl->rx_callback = slimpro_i2c_rx_cb; 467 ctx->mbox_chan = mbox_request_channel(cl, MAILBOX_I2C_INDEX); 468 if (IS_ERR(ctx->mbox_chan)) { 469 dev_err(&pdev->dev, "i2c mailbox channel request failed\n"); 470 return PTR_ERR(ctx->mbox_chan); 471 } 472 } else { 473 struct pcc_mbox_chan *pcc_chan; 474 const struct acpi_device_id *acpi_id; 475 int version = XGENE_SLIMPRO_I2C_V1; 476 477 acpi_id = acpi_match_device(pdev->dev.driver->acpi_match_table, 478 &pdev->dev); 479 if (!acpi_id) 480 return -EINVAL; 481 482 version = (int)acpi_id->driver_data; 483 484 if (device_property_read_u32(&pdev->dev, "pcc-channel", 485 &ctx->mbox_idx)) 486 ctx->mbox_idx = MAILBOX_I2C_INDEX; 487 488 cl->tx_block = false; 489 cl->rx_callback = slimpro_i2c_pcc_rx_cb; 490 pcc_chan = pcc_mbox_request_channel(cl, ctx->mbox_idx); 491 if (IS_ERR(pcc_chan)) { 492 dev_err(&pdev->dev, "PCC mailbox channel request failed\n"); 493 return PTR_ERR(pcc_chan); 494 } 495 496 ctx->pcc_chan = pcc_chan; 497 ctx->mbox_chan = pcc_chan->mchan; 498 499 if (!ctx->mbox_chan->mbox->txdone_irq) { 500 dev_err(&pdev->dev, "PCC IRQ not supported\n"); 501 rc = -ENOENT; 502 goto mbox_err; 503 } 504 505 /* 506 * This is the shared communication region 507 * for the OS and Platform to communicate over. 508 */ 509 ctx->comm_base_addr = pcc_chan->shmem_base_addr; 510 if (ctx->comm_base_addr) { 511 if (version == XGENE_SLIMPRO_I2C_V2) 512 ctx->pcc_comm_addr = memremap( 513 ctx->comm_base_addr, 514 pcc_chan->shmem_size, 515 MEMREMAP_WT); 516 else 517 ctx->pcc_comm_addr = memremap( 518 ctx->comm_base_addr, 519 pcc_chan->shmem_size, 520 MEMREMAP_WB); 521 } else { 522 dev_err(&pdev->dev, "Failed to get PCC comm region\n"); 523 rc = -ENOENT; 524 goto mbox_err; 525 } 526 527 if (!ctx->pcc_comm_addr) { 528 dev_err(&pdev->dev, 529 "Failed to ioremap PCC comm region\n"); 530 rc = -ENOMEM; 531 goto mbox_err; 532 } 533 } 534 rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); 535 if (rc) 536 dev_warn(&pdev->dev, "Unable to set dma mask\n"); 537 538 /* Setup I2C adapter */ 539 adapter = &ctx->adapter; 540 snprintf(adapter->name, sizeof(adapter->name), "MAILBOX I2C"); 541 adapter->algo = &xgene_slimpro_i2c_algorithm; 542 adapter->class = I2C_CLASS_HWMON; 543 adapter->dev.parent = &pdev->dev; 544 adapter->dev.of_node = pdev->dev.of_node; 545 ACPI_COMPANION_SET(&adapter->dev, ACPI_COMPANION(&pdev->dev)); 546 i2c_set_adapdata(adapter, ctx); 547 rc = i2c_add_adapter(adapter); 548 if (rc) 549 goto mbox_err; 550 551 dev_info(&pdev->dev, "Mailbox I2C Adapter registered\n"); 552 return 0; 553 554mbox_err: 555 if (acpi_disabled) 556 mbox_free_channel(ctx->mbox_chan); 557 else 558 pcc_mbox_free_channel(ctx->pcc_chan); 559 560 return rc; 561} 562 563static void xgene_slimpro_i2c_remove(struct platform_device *pdev) 564{ 565 struct slimpro_i2c_dev *ctx = platform_get_drvdata(pdev); 566 567 i2c_del_adapter(&ctx->adapter); 568 569 if (acpi_disabled) 570 mbox_free_channel(ctx->mbox_chan); 571 else 572 pcc_mbox_free_channel(ctx->pcc_chan); 573} 574 575static const struct of_device_id xgene_slimpro_i2c_dt_ids[] = { 576 {.compatible = "apm,xgene-slimpro-i2c" }, 577 {}, 578}; 579MODULE_DEVICE_TABLE(of, xgene_slimpro_i2c_dt_ids); 580 581#ifdef CONFIG_ACPI 582static const struct acpi_device_id xgene_slimpro_i2c_acpi_ids[] = { 583 {"APMC0D40", XGENE_SLIMPRO_I2C_V1}, 584 {"APMC0D8B", XGENE_SLIMPRO_I2C_V2}, 585 {} 586}; 587MODULE_DEVICE_TABLE(acpi, xgene_slimpro_i2c_acpi_ids); 588#endif 589 590static struct platform_driver xgene_slimpro_i2c_driver = { 591 .probe = xgene_slimpro_i2c_probe, 592 .remove_new = xgene_slimpro_i2c_remove, 593 .driver = { 594 .name = "xgene-slimpro-i2c", 595 .of_match_table = of_match_ptr(xgene_slimpro_i2c_dt_ids), 596 .acpi_match_table = ACPI_PTR(xgene_slimpro_i2c_acpi_ids) 597 }, 598}; 599 600module_platform_driver(xgene_slimpro_i2c_driver); 601 602MODULE_DESCRIPTION("APM X-Gene SLIMpro I2C driver"); 603MODULE_AUTHOR("Feng Kan <fkan@apm.com>"); 604MODULE_AUTHOR("Hieu Le <hnle@apm.com>"); 605MODULE_LICENSE("GPL"); 606