1// SPDX-License-Identifier: GPL-2.0-only 2/* 3 * Aspeed 24XX/25XX I2C Controller. 4 * 5 * Copyright (C) 2012-2017 ASPEED Technology Inc. 6 * Copyright 2017 IBM Corporation 7 * Copyright 2017 Google, Inc. 8 */ 9 10#include <linux/clk.h> 11#include <linux/completion.h> 12#include <linux/err.h> 13#include <linux/errno.h> 14#include <linux/i2c.h> 15#include <linux/init.h> 16#include <linux/interrupt.h> 17#include <linux/io.h> 18#include <linux/irq.h> 19#include <linux/kernel.h> 20#include <linux/module.h> 21#include <linux/of_address.h> 22#include <linux/of_irq.h> 23#include <linux/of_platform.h> 24#include <linux/platform_device.h> 25#include <linux/reset.h> 26#include <linux/slab.h> 27 28/* I2C Register */ 29#define ASPEED_I2C_FUN_CTRL_REG 0x00 30#define ASPEED_I2C_AC_TIMING_REG1 0x04 31#define ASPEED_I2C_AC_TIMING_REG2 0x08 32#define ASPEED_I2C_INTR_CTRL_REG 0x0c 33#define ASPEED_I2C_INTR_STS_REG 0x10 34#define ASPEED_I2C_CMD_REG 0x14 35#define ASPEED_I2C_DEV_ADDR_REG 0x18 36#define ASPEED_I2C_BYTE_BUF_REG 0x20 37 38/* Global Register Definition */ 39/* 0x00 : I2C Interrupt Status Register */ 40/* 0x08 : I2C Interrupt Target Assignment */ 41 42/* Device Register Definition */ 43/* 0x00 : I2CD Function Control Register */ 44#define ASPEED_I2CD_MULTI_MASTER_DIS BIT(15) 45#define ASPEED_I2CD_SDA_DRIVE_1T_EN BIT(8) 46#define ASPEED_I2CD_M_SDA_DRIVE_1T_EN BIT(7) 47#define ASPEED_I2CD_M_HIGH_SPEED_EN BIT(6) 48#define ASPEED_I2CD_SLAVE_EN BIT(1) 49#define ASPEED_I2CD_MASTER_EN BIT(0) 50 51/* 0x04 : I2CD Clock and AC Timing Control Register #1 */ 52#define ASPEED_I2CD_TIME_TBUF_MASK GENMASK(31, 28) 53#define ASPEED_I2CD_TIME_THDSTA_MASK GENMASK(27, 24) 54#define ASPEED_I2CD_TIME_TACST_MASK GENMASK(23, 20) 55#define ASPEED_I2CD_TIME_SCL_HIGH_SHIFT 16 56#define ASPEED_I2CD_TIME_SCL_HIGH_MASK GENMASK(19, 16) 57#define ASPEED_I2CD_TIME_SCL_LOW_SHIFT 12 58#define ASPEED_I2CD_TIME_SCL_LOW_MASK GENMASK(15, 12) 59#define ASPEED_I2CD_TIME_BASE_DIVISOR_MASK GENMASK(3, 0) 60#define ASPEED_I2CD_TIME_SCL_REG_MAX GENMASK(3, 0) 61/* 0x08 : I2CD Clock and AC Timing Control Register #2 */ 62#define ASPEED_NO_TIMEOUT_CTRL 0 63 64/* 0x0c : I2CD Interrupt Control Register & 65 * 0x10 : I2CD Interrupt Status Register 66 * 67 * These share bit definitions, so use the same values for the enable & 68 * status bits. 69 */ 70#define ASPEED_I2CD_INTR_RECV_MASK 0xf000ffff 71#define ASPEED_I2CD_INTR_SDA_DL_TIMEOUT BIT(14) 72#define ASPEED_I2CD_INTR_BUS_RECOVER_DONE BIT(13) 73#define ASPEED_I2CD_INTR_SLAVE_MATCH BIT(7) 74#define ASPEED_I2CD_INTR_SCL_TIMEOUT BIT(6) 75#define ASPEED_I2CD_INTR_ABNORMAL BIT(5) 76#define ASPEED_I2CD_INTR_NORMAL_STOP BIT(4) 77#define ASPEED_I2CD_INTR_ARBIT_LOSS BIT(3) 78#define ASPEED_I2CD_INTR_RX_DONE BIT(2) 79#define ASPEED_I2CD_INTR_TX_NAK BIT(1) 80#define ASPEED_I2CD_INTR_TX_ACK BIT(0) 81#define ASPEED_I2CD_INTR_MASTER_ERRORS \ 82 (ASPEED_I2CD_INTR_SDA_DL_TIMEOUT | \ 83 ASPEED_I2CD_INTR_SCL_TIMEOUT | \ 84 ASPEED_I2CD_INTR_ABNORMAL | \ 85 ASPEED_I2CD_INTR_ARBIT_LOSS) 86#define ASPEED_I2CD_INTR_ALL \ 87 (ASPEED_I2CD_INTR_SDA_DL_TIMEOUT | \ 88 ASPEED_I2CD_INTR_BUS_RECOVER_DONE | \ 89 ASPEED_I2CD_INTR_SCL_TIMEOUT | \ 90 ASPEED_I2CD_INTR_ABNORMAL | \ 91 ASPEED_I2CD_INTR_NORMAL_STOP | \ 92 ASPEED_I2CD_INTR_ARBIT_LOSS | \ 93 ASPEED_I2CD_INTR_RX_DONE | \ 94 ASPEED_I2CD_INTR_TX_NAK | \ 95 ASPEED_I2CD_INTR_TX_ACK) 96 97/* 0x14 : I2CD Command/Status Register */ 98#define ASPEED_I2CD_SCL_LINE_STS BIT(18) 99#define ASPEED_I2CD_SDA_LINE_STS BIT(17) 100#define ASPEED_I2CD_BUS_BUSY_STS BIT(16) 101#define ASPEED_I2CD_BUS_RECOVER_CMD BIT(11) 102 103/* Command Bit */ 104#define ASPEED_I2CD_M_STOP_CMD BIT(5) 105#define ASPEED_I2CD_M_S_RX_CMD_LAST BIT(4) 106#define ASPEED_I2CD_M_RX_CMD BIT(3) 107#define ASPEED_I2CD_S_TX_CMD BIT(2) 108#define ASPEED_I2CD_M_TX_CMD BIT(1) 109#define ASPEED_I2CD_M_START_CMD BIT(0) 110#define ASPEED_I2CD_MASTER_CMDS_MASK \ 111 (ASPEED_I2CD_M_STOP_CMD | \ 112 ASPEED_I2CD_M_S_RX_CMD_LAST | \ 113 ASPEED_I2CD_M_RX_CMD | \ 114 ASPEED_I2CD_M_TX_CMD | \ 115 ASPEED_I2CD_M_START_CMD) 116 117/* 0x18 : I2CD Slave Device Address Register */ 118#define ASPEED_I2CD_DEV_ADDR_MASK GENMASK(6, 0) 119 120enum aspeed_i2c_master_state { 121 ASPEED_I2C_MASTER_INACTIVE, 122 ASPEED_I2C_MASTER_PENDING, 123 ASPEED_I2C_MASTER_START, 124 ASPEED_I2C_MASTER_TX_FIRST, 125 ASPEED_I2C_MASTER_TX, 126 ASPEED_I2C_MASTER_RX_FIRST, 127 ASPEED_I2C_MASTER_RX, 128 ASPEED_I2C_MASTER_STOP, 129}; 130 131enum aspeed_i2c_slave_state { 132 ASPEED_I2C_SLAVE_INACTIVE, 133 ASPEED_I2C_SLAVE_START, 134 ASPEED_I2C_SLAVE_READ_REQUESTED, 135 ASPEED_I2C_SLAVE_READ_PROCESSED, 136 ASPEED_I2C_SLAVE_WRITE_REQUESTED, 137 ASPEED_I2C_SLAVE_WRITE_RECEIVED, 138 ASPEED_I2C_SLAVE_STOP, 139}; 140 141struct aspeed_i2c_bus { 142 struct i2c_adapter adap; 143 struct device *dev; 144 void __iomem *base; 145 struct reset_control *rst; 146 /* Synchronizes I/O mem access to base. */ 147 spinlock_t lock; 148 struct completion cmd_complete; 149 u32 (*get_clk_reg_val)(struct device *dev, 150 u32 divisor); 151 unsigned long parent_clk_frequency; 152 u32 bus_frequency; 153 /* Transaction state. */ 154 enum aspeed_i2c_master_state master_state; 155 struct i2c_msg *msgs; 156 size_t buf_index; 157 size_t msgs_index; 158 size_t msgs_count; 159 bool send_stop; 160 int cmd_err; 161 /* Protected only by i2c_lock_bus */ 162 int master_xfer_result; 163 /* Multi-master */ 164 bool multi_master; 165#if IS_ENABLED(CONFIG_I2C_SLAVE) 166 struct i2c_client *slave; 167 enum aspeed_i2c_slave_state slave_state; 168#endif /* CONFIG_I2C_SLAVE */ 169}; 170 171static int aspeed_i2c_reset(struct aspeed_i2c_bus *bus); 172 173static int aspeed_i2c_recover_bus(struct aspeed_i2c_bus *bus) 174{ 175 unsigned long time_left, flags; 176 int ret = 0; 177 u32 command; 178 179 spin_lock_irqsave(&bus->lock, flags); 180 command = readl(bus->base + ASPEED_I2C_CMD_REG); 181 182 if (command & ASPEED_I2CD_SDA_LINE_STS) { 183 /* Bus is idle: no recovery needed. */ 184 if (command & ASPEED_I2CD_SCL_LINE_STS) 185 goto out; 186 dev_dbg(bus->dev, "SCL hung (state %x), attempting recovery\n", 187 command); 188 189 reinit_completion(&bus->cmd_complete); 190 writel(ASPEED_I2CD_M_STOP_CMD, bus->base + ASPEED_I2C_CMD_REG); 191 spin_unlock_irqrestore(&bus->lock, flags); 192 193 time_left = wait_for_completion_timeout( 194 &bus->cmd_complete, bus->adap.timeout); 195 196 spin_lock_irqsave(&bus->lock, flags); 197 if (time_left == 0) 198 goto reset_out; 199 else if (bus->cmd_err) 200 goto reset_out; 201 /* Recovery failed. */ 202 else if (!(readl(bus->base + ASPEED_I2C_CMD_REG) & 203 ASPEED_I2CD_SCL_LINE_STS)) 204 goto reset_out; 205 /* Bus error. */ 206 } else { 207 dev_dbg(bus->dev, "SDA hung (state %x), attempting recovery\n", 208 command); 209 210 reinit_completion(&bus->cmd_complete); 211 /* Writes 1 to 8 SCL clock cycles until SDA is released. */ 212 writel(ASPEED_I2CD_BUS_RECOVER_CMD, 213 bus->base + ASPEED_I2C_CMD_REG); 214 spin_unlock_irqrestore(&bus->lock, flags); 215 216 time_left = wait_for_completion_timeout( 217 &bus->cmd_complete, bus->adap.timeout); 218 219 spin_lock_irqsave(&bus->lock, flags); 220 if (time_left == 0) 221 goto reset_out; 222 else if (bus->cmd_err) 223 goto reset_out; 224 /* Recovery failed. */ 225 else if (!(readl(bus->base + ASPEED_I2C_CMD_REG) & 226 ASPEED_I2CD_SDA_LINE_STS)) 227 goto reset_out; 228 } 229 230out: 231 spin_unlock_irqrestore(&bus->lock, flags); 232 233 return ret; 234 235reset_out: 236 spin_unlock_irqrestore(&bus->lock, flags); 237 238 return aspeed_i2c_reset(bus); 239} 240 241#if IS_ENABLED(CONFIG_I2C_SLAVE) 242static u32 aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus, u32 irq_status) 243{ 244 u32 command, irq_handled = 0; 245 struct i2c_client *slave = bus->slave; 246 u8 value; 247 int ret; 248 249 if (!slave) 250 return 0; 251 252 /* 253 * Handle stop conditions early, prior to SLAVE_MATCH. Some masters may drive 254 * transfers with low enough latency between the nak/stop phase of the current 255 * command and the start/address phase of the following command that the 256 * interrupts are coalesced by the time we process them. 257 */ 258 if (irq_status & ASPEED_I2CD_INTR_NORMAL_STOP) { 259 irq_handled |= ASPEED_I2CD_INTR_NORMAL_STOP; 260 bus->slave_state = ASPEED_I2C_SLAVE_STOP; 261 } 262 263 if (irq_status & ASPEED_I2CD_INTR_TX_NAK && 264 bus->slave_state == ASPEED_I2C_SLAVE_READ_PROCESSED) { 265 irq_handled |= ASPEED_I2CD_INTR_TX_NAK; 266 bus->slave_state = ASPEED_I2C_SLAVE_STOP; 267 } 268 269 /* Propagate any stop conditions to the slave implementation. */ 270 if (bus->slave_state == ASPEED_I2C_SLAVE_STOP) { 271 i2c_slave_event(slave, I2C_SLAVE_STOP, &value); 272 bus->slave_state = ASPEED_I2C_SLAVE_INACTIVE; 273 } 274 275 /* 276 * Now that we've dealt with any potentially coalesced stop conditions, 277 * address any start conditions. 278 */ 279 if (irq_status & ASPEED_I2CD_INTR_SLAVE_MATCH) { 280 irq_handled |= ASPEED_I2CD_INTR_SLAVE_MATCH; 281 bus->slave_state = ASPEED_I2C_SLAVE_START; 282 } 283 284 /* 285 * If the slave has been stopped and not started then slave interrupt 286 * handling is complete. 287 */ 288 if (bus->slave_state == ASPEED_I2C_SLAVE_INACTIVE) 289 return irq_handled; 290 291 command = readl(bus->base + ASPEED_I2C_CMD_REG); 292 dev_dbg(bus->dev, "slave irq status 0x%08x, cmd 0x%08x\n", 293 irq_status, command); 294 295 /* Slave was sent something. */ 296 if (irq_status & ASPEED_I2CD_INTR_RX_DONE) { 297 value = readl(bus->base + ASPEED_I2C_BYTE_BUF_REG) >> 8; 298 /* Handle address frame. */ 299 if (bus->slave_state == ASPEED_I2C_SLAVE_START) { 300 if (value & 0x1) 301 bus->slave_state = 302 ASPEED_I2C_SLAVE_READ_REQUESTED; 303 else 304 bus->slave_state = 305 ASPEED_I2C_SLAVE_WRITE_REQUESTED; 306 } 307 irq_handled |= ASPEED_I2CD_INTR_RX_DONE; 308 } 309 310 switch (bus->slave_state) { 311 case ASPEED_I2C_SLAVE_READ_REQUESTED: 312 if (unlikely(irq_status & ASPEED_I2CD_INTR_TX_ACK)) 313 dev_err(bus->dev, "Unexpected ACK on read request.\n"); 314 bus->slave_state = ASPEED_I2C_SLAVE_READ_PROCESSED; 315 i2c_slave_event(slave, I2C_SLAVE_READ_REQUESTED, &value); 316 writel(value, bus->base + ASPEED_I2C_BYTE_BUF_REG); 317 writel(ASPEED_I2CD_S_TX_CMD, bus->base + ASPEED_I2C_CMD_REG); 318 break; 319 case ASPEED_I2C_SLAVE_READ_PROCESSED: 320 if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) { 321 dev_err(bus->dev, 322 "Expected ACK after processed read.\n"); 323 break; 324 } 325 irq_handled |= ASPEED_I2CD_INTR_TX_ACK; 326 i2c_slave_event(slave, I2C_SLAVE_READ_PROCESSED, &value); 327 writel(value, bus->base + ASPEED_I2C_BYTE_BUF_REG); 328 writel(ASPEED_I2CD_S_TX_CMD, bus->base + ASPEED_I2C_CMD_REG); 329 break; 330 case ASPEED_I2C_SLAVE_WRITE_REQUESTED: 331 bus->slave_state = ASPEED_I2C_SLAVE_WRITE_RECEIVED; 332 ret = i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value); 333 /* 334 * Slave ACK's on this address phase already but as the backend driver 335 * returns an errno, the bus driver should nack the next incoming byte. 336 */ 337 if (ret < 0) 338 writel(ASPEED_I2CD_M_S_RX_CMD_LAST, bus->base + ASPEED_I2C_CMD_REG); 339 break; 340 case ASPEED_I2C_SLAVE_WRITE_RECEIVED: 341 i2c_slave_event(slave, I2C_SLAVE_WRITE_RECEIVED, &value); 342 break; 343 case ASPEED_I2C_SLAVE_STOP: 344 /* Stop event handling is done early. Unreachable. */ 345 break; 346 case ASPEED_I2C_SLAVE_START: 347 /* Slave was just started. Waiting for the next event. */; 348 break; 349 default: 350 dev_err(bus->dev, "unknown slave_state: %d\n", 351 bus->slave_state); 352 bus->slave_state = ASPEED_I2C_SLAVE_INACTIVE; 353 break; 354 } 355 356 return irq_handled; 357} 358#endif /* CONFIG_I2C_SLAVE */ 359 360/* precondition: bus.lock has been acquired. */ 361static void aspeed_i2c_do_start(struct aspeed_i2c_bus *bus) 362{ 363 u32 command = ASPEED_I2CD_M_START_CMD | ASPEED_I2CD_M_TX_CMD; 364 struct i2c_msg *msg = &bus->msgs[bus->msgs_index]; 365 u8 slave_addr = i2c_8bit_addr_from_msg(msg); 366 367#if IS_ENABLED(CONFIG_I2C_SLAVE) 368 /* 369 * If it's requested in the middle of a slave session, set the master 370 * state to 'pending' then H/W will continue handling this master 371 * command when the bus comes back to the idle state. 372 */ 373 if (bus->slave_state != ASPEED_I2C_SLAVE_INACTIVE) { 374 bus->master_state = ASPEED_I2C_MASTER_PENDING; 375 return; 376 } 377#endif /* CONFIG_I2C_SLAVE */ 378 379 bus->master_state = ASPEED_I2C_MASTER_START; 380 bus->buf_index = 0; 381 382 if (msg->flags & I2C_M_RD) { 383 command |= ASPEED_I2CD_M_RX_CMD; 384 /* Need to let the hardware know to NACK after RX. */ 385 if (msg->len == 1 && !(msg->flags & I2C_M_RECV_LEN)) 386 command |= ASPEED_I2CD_M_S_RX_CMD_LAST; 387 } 388 389 writel(slave_addr, bus->base + ASPEED_I2C_BYTE_BUF_REG); 390 writel(command, bus->base + ASPEED_I2C_CMD_REG); 391} 392 393/* precondition: bus.lock has been acquired. */ 394static void aspeed_i2c_do_stop(struct aspeed_i2c_bus *bus) 395{ 396 bus->master_state = ASPEED_I2C_MASTER_STOP; 397 writel(ASPEED_I2CD_M_STOP_CMD, bus->base + ASPEED_I2C_CMD_REG); 398} 399 400/* precondition: bus.lock has been acquired. */ 401static void aspeed_i2c_next_msg_or_stop(struct aspeed_i2c_bus *bus) 402{ 403 if (bus->msgs_index + 1 < bus->msgs_count) { 404 bus->msgs_index++; 405 aspeed_i2c_do_start(bus); 406 } else { 407 aspeed_i2c_do_stop(bus); 408 } 409} 410 411static int aspeed_i2c_is_irq_error(u32 irq_status) 412{ 413 if (irq_status & ASPEED_I2CD_INTR_ARBIT_LOSS) 414 return -EAGAIN; 415 if (irq_status & (ASPEED_I2CD_INTR_SDA_DL_TIMEOUT | 416 ASPEED_I2CD_INTR_SCL_TIMEOUT)) 417 return -EBUSY; 418 if (irq_status & (ASPEED_I2CD_INTR_ABNORMAL)) 419 return -EPROTO; 420 421 return 0; 422} 423 424static u32 aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus, u32 irq_status) 425{ 426 u32 irq_handled = 0, command = 0; 427 struct i2c_msg *msg; 428 u8 recv_byte; 429 int ret; 430 431 if (irq_status & ASPEED_I2CD_INTR_BUS_RECOVER_DONE) { 432 bus->master_state = ASPEED_I2C_MASTER_INACTIVE; 433 irq_handled |= ASPEED_I2CD_INTR_BUS_RECOVER_DONE; 434 goto out_complete; 435 } 436 437 /* 438 * We encountered an interrupt that reports an error: the hardware 439 * should clear the command queue effectively taking us back to the 440 * INACTIVE state. 441 */ 442 ret = aspeed_i2c_is_irq_error(irq_status); 443 if (ret) { 444 dev_dbg(bus->dev, "received error interrupt: 0x%08x\n", 445 irq_status); 446 irq_handled |= (irq_status & ASPEED_I2CD_INTR_MASTER_ERRORS); 447 if (bus->master_state != ASPEED_I2C_MASTER_INACTIVE) { 448 bus->cmd_err = ret; 449 bus->master_state = ASPEED_I2C_MASTER_INACTIVE; 450 goto out_complete; 451 } 452 } 453 454 /* Master is not currently active, irq was for someone else. */ 455 if (bus->master_state == ASPEED_I2C_MASTER_INACTIVE || 456 bus->master_state == ASPEED_I2C_MASTER_PENDING) 457 goto out_no_complete; 458 459 /* We are in an invalid state; reset bus to a known state. */ 460 if (!bus->msgs) { 461 dev_err(bus->dev, "bus in unknown state. irq_status: 0x%x\n", 462 irq_status); 463 bus->cmd_err = -EIO; 464 if (bus->master_state != ASPEED_I2C_MASTER_STOP && 465 bus->master_state != ASPEED_I2C_MASTER_INACTIVE) 466 aspeed_i2c_do_stop(bus); 467 goto out_no_complete; 468 } 469 msg = &bus->msgs[bus->msgs_index]; 470 471 /* 472 * START is a special case because we still have to handle a subsequent 473 * TX or RX immediately after we handle it, so we handle it here and 474 * then update the state and handle the new state below. 475 */ 476 if (bus->master_state == ASPEED_I2C_MASTER_START) { 477#if IS_ENABLED(CONFIG_I2C_SLAVE) 478 /* 479 * If a peer master starts a xfer immediately after it queues a 480 * master command, clear the queued master command and change 481 * its state to 'pending'. To simplify handling of pending 482 * cases, it uses S/W solution instead of H/W command queue 483 * handling. 484 */ 485 if (unlikely(irq_status & ASPEED_I2CD_INTR_SLAVE_MATCH)) { 486 writel(readl(bus->base + ASPEED_I2C_CMD_REG) & 487 ~ASPEED_I2CD_MASTER_CMDS_MASK, 488 bus->base + ASPEED_I2C_CMD_REG); 489 bus->master_state = ASPEED_I2C_MASTER_PENDING; 490 dev_dbg(bus->dev, 491 "master goes pending due to a slave start\n"); 492 goto out_no_complete; 493 } 494#endif /* CONFIG_I2C_SLAVE */ 495 if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) { 496 if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_NAK))) { 497 bus->cmd_err = -ENXIO; 498 bus->master_state = ASPEED_I2C_MASTER_INACTIVE; 499 goto out_complete; 500 } 501 pr_devel("no slave present at %02x\n", msg->addr); 502 irq_handled |= ASPEED_I2CD_INTR_TX_NAK; 503 bus->cmd_err = -ENXIO; 504 aspeed_i2c_do_stop(bus); 505 goto out_no_complete; 506 } 507 irq_handled |= ASPEED_I2CD_INTR_TX_ACK; 508 if (msg->len == 0) { /* SMBUS_QUICK */ 509 aspeed_i2c_do_stop(bus); 510 goto out_no_complete; 511 } 512 if (msg->flags & I2C_M_RD) 513 bus->master_state = ASPEED_I2C_MASTER_RX_FIRST; 514 else 515 bus->master_state = ASPEED_I2C_MASTER_TX_FIRST; 516 } 517 518 switch (bus->master_state) { 519 case ASPEED_I2C_MASTER_TX: 520 if (unlikely(irq_status & ASPEED_I2CD_INTR_TX_NAK)) { 521 dev_dbg(bus->dev, "slave NACKed TX\n"); 522 irq_handled |= ASPEED_I2CD_INTR_TX_NAK; 523 goto error_and_stop; 524 } else if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) { 525 dev_err(bus->dev, "slave failed to ACK TX\n"); 526 goto error_and_stop; 527 } 528 irq_handled |= ASPEED_I2CD_INTR_TX_ACK; 529 fallthrough; 530 case ASPEED_I2C_MASTER_TX_FIRST: 531 if (bus->buf_index < msg->len) { 532 bus->master_state = ASPEED_I2C_MASTER_TX; 533 writel(msg->buf[bus->buf_index++], 534 bus->base + ASPEED_I2C_BYTE_BUF_REG); 535 writel(ASPEED_I2CD_M_TX_CMD, 536 bus->base + ASPEED_I2C_CMD_REG); 537 } else { 538 aspeed_i2c_next_msg_or_stop(bus); 539 } 540 goto out_no_complete; 541 case ASPEED_I2C_MASTER_RX_FIRST: 542 /* RX may not have completed yet (only address cycle) */ 543 if (!(irq_status & ASPEED_I2CD_INTR_RX_DONE)) 544 goto out_no_complete; 545 fallthrough; 546 case ASPEED_I2C_MASTER_RX: 547 if (unlikely(!(irq_status & ASPEED_I2CD_INTR_RX_DONE))) { 548 dev_err(bus->dev, "master failed to RX\n"); 549 goto error_and_stop; 550 } 551 irq_handled |= ASPEED_I2CD_INTR_RX_DONE; 552 553 recv_byte = readl(bus->base + ASPEED_I2C_BYTE_BUF_REG) >> 8; 554 msg->buf[bus->buf_index++] = recv_byte; 555 556 if (msg->flags & I2C_M_RECV_LEN) { 557 if (unlikely(recv_byte > I2C_SMBUS_BLOCK_MAX)) { 558 bus->cmd_err = -EPROTO; 559 aspeed_i2c_do_stop(bus); 560 goto out_no_complete; 561 } 562 msg->len = recv_byte + 563 ((msg->flags & I2C_CLIENT_PEC) ? 2 : 1); 564 msg->flags &= ~I2C_M_RECV_LEN; 565 } 566 567 if (bus->buf_index < msg->len) { 568 bus->master_state = ASPEED_I2C_MASTER_RX; 569 command = ASPEED_I2CD_M_RX_CMD; 570 if (bus->buf_index + 1 == msg->len) 571 command |= ASPEED_I2CD_M_S_RX_CMD_LAST; 572 writel(command, bus->base + ASPEED_I2C_CMD_REG); 573 } else { 574 aspeed_i2c_next_msg_or_stop(bus); 575 } 576 goto out_no_complete; 577 case ASPEED_I2C_MASTER_STOP: 578 if (unlikely(!(irq_status & ASPEED_I2CD_INTR_NORMAL_STOP))) { 579 dev_err(bus->dev, 580 "master failed to STOP. irq_status:0x%x\n", 581 irq_status); 582 bus->cmd_err = -EIO; 583 /* Do not STOP as we have already tried. */ 584 } else { 585 irq_handled |= ASPEED_I2CD_INTR_NORMAL_STOP; 586 } 587 588 bus->master_state = ASPEED_I2C_MASTER_INACTIVE; 589 goto out_complete; 590 case ASPEED_I2C_MASTER_INACTIVE: 591 dev_err(bus->dev, 592 "master received interrupt 0x%08x, but is inactive\n", 593 irq_status); 594 bus->cmd_err = -EIO; 595 /* Do not STOP as we should be inactive. */ 596 goto out_complete; 597 default: 598 WARN(1, "unknown master state\n"); 599 bus->master_state = ASPEED_I2C_MASTER_INACTIVE; 600 bus->cmd_err = -EINVAL; 601 goto out_complete; 602 } 603error_and_stop: 604 bus->cmd_err = -EIO; 605 aspeed_i2c_do_stop(bus); 606 goto out_no_complete; 607out_complete: 608 bus->msgs = NULL; 609 if (bus->cmd_err) 610 bus->master_xfer_result = bus->cmd_err; 611 else 612 bus->master_xfer_result = bus->msgs_index + 1; 613 complete(&bus->cmd_complete); 614out_no_complete: 615 return irq_handled; 616} 617 618static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id) 619{ 620 struct aspeed_i2c_bus *bus = dev_id; 621 u32 irq_received, irq_remaining, irq_handled; 622 623 spin_lock(&bus->lock); 624 irq_received = readl(bus->base + ASPEED_I2C_INTR_STS_REG); 625 /* Ack all interrupts except for Rx done */ 626 writel(irq_received & ~ASPEED_I2CD_INTR_RX_DONE, 627 bus->base + ASPEED_I2C_INTR_STS_REG); 628 readl(bus->base + ASPEED_I2C_INTR_STS_REG); 629 irq_received &= ASPEED_I2CD_INTR_RECV_MASK; 630 irq_remaining = irq_received; 631 632#if IS_ENABLED(CONFIG_I2C_SLAVE) 633 /* 634 * In most cases, interrupt bits will be set one by one, although 635 * multiple interrupt bits could be set at the same time. It's also 636 * possible that master interrupt bits could be set along with slave 637 * interrupt bits. Each case needs to be handled using corresponding 638 * handlers depending on the current state. 639 */ 640 if (bus->master_state != ASPEED_I2C_MASTER_INACTIVE && 641 bus->master_state != ASPEED_I2C_MASTER_PENDING) { 642 irq_handled = aspeed_i2c_master_irq(bus, irq_remaining); 643 irq_remaining &= ~irq_handled; 644 if (irq_remaining) 645 irq_handled |= aspeed_i2c_slave_irq(bus, irq_remaining); 646 } else { 647 irq_handled = aspeed_i2c_slave_irq(bus, irq_remaining); 648 irq_remaining &= ~irq_handled; 649 if (irq_remaining) 650 irq_handled |= aspeed_i2c_master_irq(bus, 651 irq_remaining); 652 } 653 654 /* 655 * Start a pending master command at here if a slave operation is 656 * completed. 657 */ 658 if (bus->master_state == ASPEED_I2C_MASTER_PENDING && 659 bus->slave_state == ASPEED_I2C_SLAVE_INACTIVE) 660 aspeed_i2c_do_start(bus); 661#else 662 irq_handled = aspeed_i2c_master_irq(bus, irq_remaining); 663#endif /* CONFIG_I2C_SLAVE */ 664 665 irq_remaining &= ~irq_handled; 666 if (irq_remaining) 667 dev_err(bus->dev, 668 "irq handled != irq. expected 0x%08x, but was 0x%08x\n", 669 irq_received, irq_handled); 670 671 /* Ack Rx done */ 672 if (irq_received & ASPEED_I2CD_INTR_RX_DONE) { 673 writel(ASPEED_I2CD_INTR_RX_DONE, 674 bus->base + ASPEED_I2C_INTR_STS_REG); 675 readl(bus->base + ASPEED_I2C_INTR_STS_REG); 676 } 677 spin_unlock(&bus->lock); 678 return irq_remaining ? IRQ_NONE : IRQ_HANDLED; 679} 680 681static int aspeed_i2c_master_xfer(struct i2c_adapter *adap, 682 struct i2c_msg *msgs, int num) 683{ 684 struct aspeed_i2c_bus *bus = i2c_get_adapdata(adap); 685 unsigned long time_left, flags; 686 687 spin_lock_irqsave(&bus->lock, flags); 688 bus->cmd_err = 0; 689 690 /* If bus is busy in a single master environment, attempt recovery. */ 691 if (!bus->multi_master && 692 (readl(bus->base + ASPEED_I2C_CMD_REG) & 693 ASPEED_I2CD_BUS_BUSY_STS)) { 694 int ret; 695 696 spin_unlock_irqrestore(&bus->lock, flags); 697 ret = aspeed_i2c_recover_bus(bus); 698 if (ret) 699 return ret; 700 spin_lock_irqsave(&bus->lock, flags); 701 } 702 703 bus->cmd_err = 0; 704 bus->msgs = msgs; 705 bus->msgs_index = 0; 706 bus->msgs_count = num; 707 708 reinit_completion(&bus->cmd_complete); 709 aspeed_i2c_do_start(bus); 710 spin_unlock_irqrestore(&bus->lock, flags); 711 712 time_left = wait_for_completion_timeout(&bus->cmd_complete, 713 bus->adap.timeout); 714 715 if (time_left == 0) { 716 /* 717 * In a multi-master setup, if a timeout occurs, attempt 718 * recovery. But if the bus is idle, we still need to reset the 719 * i2c controller to clear the remaining interrupts. 720 */ 721 if (bus->multi_master && 722 (readl(bus->base + ASPEED_I2C_CMD_REG) & 723 ASPEED_I2CD_BUS_BUSY_STS)) 724 aspeed_i2c_recover_bus(bus); 725 else 726 aspeed_i2c_reset(bus); 727 728 /* 729 * If timed out and the state is still pending, drop the pending 730 * master command. 731 */ 732 spin_lock_irqsave(&bus->lock, flags); 733 if (bus->master_state == ASPEED_I2C_MASTER_PENDING) 734 bus->master_state = ASPEED_I2C_MASTER_INACTIVE; 735 spin_unlock_irqrestore(&bus->lock, flags); 736 737 return -ETIMEDOUT; 738 } 739 740 return bus->master_xfer_result; 741} 742 743static u32 aspeed_i2c_functionality(struct i2c_adapter *adap) 744{ 745 return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA; 746} 747 748#if IS_ENABLED(CONFIG_I2C_SLAVE) 749/* precondition: bus.lock has been acquired. */ 750static void __aspeed_i2c_reg_slave(struct aspeed_i2c_bus *bus, u16 slave_addr) 751{ 752 u32 addr_reg_val, func_ctrl_reg_val; 753 754 /* 755 * Set slave addr. Reserved bits can all safely be written with zeros 756 * on all of ast2[456]00, so zero everything else to ensure we only 757 * enable a single slave address (ast2500 has two, ast2600 has three, 758 * the enable bits for which are also in this register) so that we don't 759 * end up with additional phantom devices responding on the bus. 760 */ 761 addr_reg_val = slave_addr & ASPEED_I2CD_DEV_ADDR_MASK; 762 writel(addr_reg_val, bus->base + ASPEED_I2C_DEV_ADDR_REG); 763 764 /* Turn on slave mode. */ 765 func_ctrl_reg_val = readl(bus->base + ASPEED_I2C_FUN_CTRL_REG); 766 func_ctrl_reg_val |= ASPEED_I2CD_SLAVE_EN; 767 writel(func_ctrl_reg_val, bus->base + ASPEED_I2C_FUN_CTRL_REG); 768 769 bus->slave_state = ASPEED_I2C_SLAVE_INACTIVE; 770} 771 772static int aspeed_i2c_reg_slave(struct i2c_client *client) 773{ 774 struct aspeed_i2c_bus *bus = i2c_get_adapdata(client->adapter); 775 unsigned long flags; 776 777 spin_lock_irqsave(&bus->lock, flags); 778 if (bus->slave) { 779 spin_unlock_irqrestore(&bus->lock, flags); 780 return -EINVAL; 781 } 782 783 __aspeed_i2c_reg_slave(bus, client->addr); 784 785 bus->slave = client; 786 spin_unlock_irqrestore(&bus->lock, flags); 787 788 return 0; 789} 790 791static int aspeed_i2c_unreg_slave(struct i2c_client *client) 792{ 793 struct aspeed_i2c_bus *bus = i2c_get_adapdata(client->adapter); 794 u32 func_ctrl_reg_val; 795 unsigned long flags; 796 797 spin_lock_irqsave(&bus->lock, flags); 798 if (!bus->slave) { 799 spin_unlock_irqrestore(&bus->lock, flags); 800 return -EINVAL; 801 } 802 803 /* Turn off slave mode. */ 804 func_ctrl_reg_val = readl(bus->base + ASPEED_I2C_FUN_CTRL_REG); 805 func_ctrl_reg_val &= ~ASPEED_I2CD_SLAVE_EN; 806 writel(func_ctrl_reg_val, bus->base + ASPEED_I2C_FUN_CTRL_REG); 807 808 bus->slave = NULL; 809 spin_unlock_irqrestore(&bus->lock, flags); 810 811 return 0; 812} 813#endif /* CONFIG_I2C_SLAVE */ 814 815static const struct i2c_algorithm aspeed_i2c_algo = { 816 .master_xfer = aspeed_i2c_master_xfer, 817 .functionality = aspeed_i2c_functionality, 818#if IS_ENABLED(CONFIG_I2C_SLAVE) 819 .reg_slave = aspeed_i2c_reg_slave, 820 .unreg_slave = aspeed_i2c_unreg_slave, 821#endif /* CONFIG_I2C_SLAVE */ 822}; 823 824static u32 aspeed_i2c_get_clk_reg_val(struct device *dev, 825 u32 clk_high_low_mask, 826 u32 divisor) 827{ 828 u32 base_clk_divisor, clk_high_low_max, clk_high, clk_low, tmp; 829 830 /* 831 * SCL_high and SCL_low represent a value 1 greater than what is stored 832 * since a zero divider is meaningless. Thus, the max value each can 833 * store is every bit set + 1. Since SCL_high and SCL_low are added 834 * together (see below), the max value of both is the max value of one 835 * them times two. 836 */ 837 clk_high_low_max = (clk_high_low_mask + 1) * 2; 838 839 /* 840 * The actual clock frequency of SCL is: 841 * SCL_freq = APB_freq / (base_freq * (SCL_high + SCL_low)) 842 * = APB_freq / divisor 843 * where base_freq is a programmable clock divider; its value is 844 * base_freq = 1 << base_clk_divisor 845 * SCL_high is the number of base_freq clock cycles that SCL stays high 846 * and SCL_low is the number of base_freq clock cycles that SCL stays 847 * low for a period of SCL. 848 * The actual register has a minimum SCL_high and SCL_low minimum of 1; 849 * thus, they start counting at zero. So 850 * SCL_high = clk_high + 1 851 * SCL_low = clk_low + 1 852 * Thus, 853 * SCL_freq = APB_freq / 854 * ((1 << base_clk_divisor) * (clk_high + 1 + clk_low + 1)) 855 * The documentation recommends clk_high >= clk_high_max / 2 and 856 * clk_low >= clk_low_max / 2 - 1 when possible; this last constraint 857 * gives us the following solution: 858 */ 859 base_clk_divisor = divisor > clk_high_low_max ? 860 ilog2((divisor - 1) / clk_high_low_max) + 1 : 0; 861 862 if (base_clk_divisor > ASPEED_I2CD_TIME_BASE_DIVISOR_MASK) { 863 base_clk_divisor = ASPEED_I2CD_TIME_BASE_DIVISOR_MASK; 864 clk_low = clk_high_low_mask; 865 clk_high = clk_high_low_mask; 866 dev_err(dev, 867 "clamping clock divider: divider requested, %u, is greater than largest possible divider, %u.\n", 868 divisor, (1 << base_clk_divisor) * clk_high_low_max); 869 } else { 870 tmp = (divisor + (1 << base_clk_divisor) - 1) 871 >> base_clk_divisor; 872 clk_low = tmp / 2; 873 clk_high = tmp - clk_low; 874 875 if (clk_high) 876 clk_high--; 877 878 if (clk_low) 879 clk_low--; 880 } 881 882 883 return ((clk_high << ASPEED_I2CD_TIME_SCL_HIGH_SHIFT) 884 & ASPEED_I2CD_TIME_SCL_HIGH_MASK) 885 | ((clk_low << ASPEED_I2CD_TIME_SCL_LOW_SHIFT) 886 & ASPEED_I2CD_TIME_SCL_LOW_MASK) 887 | (base_clk_divisor 888 & ASPEED_I2CD_TIME_BASE_DIVISOR_MASK); 889} 890 891static u32 aspeed_i2c_24xx_get_clk_reg_val(struct device *dev, u32 divisor) 892{ 893 /* 894 * clk_high and clk_low are each 3 bits wide, so each can hold a max 895 * value of 8 giving a clk_high_low_max of 16. 896 */ 897 return aspeed_i2c_get_clk_reg_val(dev, GENMASK(2, 0), divisor); 898} 899 900static u32 aspeed_i2c_25xx_get_clk_reg_val(struct device *dev, u32 divisor) 901{ 902 /* 903 * clk_high and clk_low are each 4 bits wide, so each can hold a max 904 * value of 16 giving a clk_high_low_max of 32. 905 */ 906 return aspeed_i2c_get_clk_reg_val(dev, GENMASK(3, 0), divisor); 907} 908 909/* precondition: bus.lock has been acquired. */ 910static int aspeed_i2c_init_clk(struct aspeed_i2c_bus *bus) 911{ 912 u32 divisor, clk_reg_val; 913 914 divisor = DIV_ROUND_UP(bus->parent_clk_frequency, bus->bus_frequency); 915 clk_reg_val = readl(bus->base + ASPEED_I2C_AC_TIMING_REG1); 916 clk_reg_val &= (ASPEED_I2CD_TIME_TBUF_MASK | 917 ASPEED_I2CD_TIME_THDSTA_MASK | 918 ASPEED_I2CD_TIME_TACST_MASK); 919 clk_reg_val |= bus->get_clk_reg_val(bus->dev, divisor); 920 writel(clk_reg_val, bus->base + ASPEED_I2C_AC_TIMING_REG1); 921 writel(ASPEED_NO_TIMEOUT_CTRL, bus->base + ASPEED_I2C_AC_TIMING_REG2); 922 923 return 0; 924} 925 926/* precondition: bus.lock has been acquired. */ 927static int aspeed_i2c_init(struct aspeed_i2c_bus *bus, 928 struct platform_device *pdev) 929{ 930 u32 fun_ctrl_reg = ASPEED_I2CD_MASTER_EN; 931 int ret; 932 933 /* Disable everything. */ 934 writel(0, bus->base + ASPEED_I2C_FUN_CTRL_REG); 935 936 ret = aspeed_i2c_init_clk(bus); 937 if (ret < 0) 938 return ret; 939 940 if (of_property_read_bool(pdev->dev.of_node, "multi-master")) 941 bus->multi_master = true; 942 else 943 fun_ctrl_reg |= ASPEED_I2CD_MULTI_MASTER_DIS; 944 945 /* Enable Master Mode */ 946 writel(readl(bus->base + ASPEED_I2C_FUN_CTRL_REG) | fun_ctrl_reg, 947 bus->base + ASPEED_I2C_FUN_CTRL_REG); 948 949#if IS_ENABLED(CONFIG_I2C_SLAVE) 950 /* If slave has already been registered, re-enable it. */ 951 if (bus->slave) 952 __aspeed_i2c_reg_slave(bus, bus->slave->addr); 953#endif /* CONFIG_I2C_SLAVE */ 954 955 /* Set interrupt generation of I2C controller */ 956 writel(ASPEED_I2CD_INTR_ALL, bus->base + ASPEED_I2C_INTR_CTRL_REG); 957 958 return 0; 959} 960 961static int aspeed_i2c_reset(struct aspeed_i2c_bus *bus) 962{ 963 struct platform_device *pdev = to_platform_device(bus->dev); 964 unsigned long flags; 965 int ret; 966 967 spin_lock_irqsave(&bus->lock, flags); 968 969 /* Disable and ack all interrupts. */ 970 writel(0, bus->base + ASPEED_I2C_INTR_CTRL_REG); 971 writel(0xffffffff, bus->base + ASPEED_I2C_INTR_STS_REG); 972 973 ret = aspeed_i2c_init(bus, pdev); 974 975 spin_unlock_irqrestore(&bus->lock, flags); 976 977 return ret; 978} 979 980static const struct of_device_id aspeed_i2c_bus_of_table[] = { 981 { 982 .compatible = "aspeed,ast2400-i2c-bus", 983 .data = aspeed_i2c_24xx_get_clk_reg_val, 984 }, 985 { 986 .compatible = "aspeed,ast2500-i2c-bus", 987 .data = aspeed_i2c_25xx_get_clk_reg_val, 988 }, 989 { 990 .compatible = "aspeed,ast2600-i2c-bus", 991 .data = aspeed_i2c_25xx_get_clk_reg_val, 992 }, 993 { }, 994}; 995MODULE_DEVICE_TABLE(of, aspeed_i2c_bus_of_table); 996 997static int aspeed_i2c_probe_bus(struct platform_device *pdev) 998{ 999 const struct of_device_id *match; 1000 struct aspeed_i2c_bus *bus; 1001 struct clk *parent_clk; 1002 int irq, ret; 1003 1004 bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL); 1005 if (!bus) 1006 return -ENOMEM; 1007 1008 bus->base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL); 1009 if (IS_ERR(bus->base)) 1010 return PTR_ERR(bus->base); 1011 1012 parent_clk = devm_clk_get(&pdev->dev, NULL); 1013 if (IS_ERR(parent_clk)) 1014 return PTR_ERR(parent_clk); 1015 bus->parent_clk_frequency = clk_get_rate(parent_clk); 1016 /* We just need the clock rate, we don't actually use the clk object. */ 1017 devm_clk_put(&pdev->dev, parent_clk); 1018 1019 bus->rst = devm_reset_control_get_shared(&pdev->dev, NULL); 1020 if (IS_ERR(bus->rst)) { 1021 dev_err(&pdev->dev, 1022 "missing or invalid reset controller device tree entry\n"); 1023 return PTR_ERR(bus->rst); 1024 } 1025 reset_control_deassert(bus->rst); 1026 1027 ret = of_property_read_u32(pdev->dev.of_node, 1028 "bus-frequency", &bus->bus_frequency); 1029 if (ret < 0) { 1030 dev_err(&pdev->dev, 1031 "Could not read bus-frequency property\n"); 1032 bus->bus_frequency = I2C_MAX_STANDARD_MODE_FREQ; 1033 } 1034 1035 match = of_match_node(aspeed_i2c_bus_of_table, pdev->dev.of_node); 1036 if (!match) 1037 bus->get_clk_reg_val = aspeed_i2c_24xx_get_clk_reg_val; 1038 else 1039 bus->get_clk_reg_val = (u32 (*)(struct device *, u32)) 1040 match->data; 1041 1042 /* Initialize the I2C adapter */ 1043 spin_lock_init(&bus->lock); 1044 init_completion(&bus->cmd_complete); 1045 bus->adap.owner = THIS_MODULE; 1046 bus->adap.retries = 0; 1047 bus->adap.algo = &aspeed_i2c_algo; 1048 bus->adap.dev.parent = &pdev->dev; 1049 bus->adap.dev.of_node = pdev->dev.of_node; 1050 strscpy(bus->adap.name, pdev->name, sizeof(bus->adap.name)); 1051 i2c_set_adapdata(&bus->adap, bus); 1052 1053 bus->dev = &pdev->dev; 1054 1055 /* Clean up any left over interrupt state. */ 1056 writel(0, bus->base + ASPEED_I2C_INTR_CTRL_REG); 1057 writel(0xffffffff, bus->base + ASPEED_I2C_INTR_STS_REG); 1058 /* 1059 * bus.lock does not need to be held because the interrupt handler has 1060 * not been enabled yet. 1061 */ 1062 ret = aspeed_i2c_init(bus, pdev); 1063 if (ret < 0) 1064 return ret; 1065 1066 irq = irq_of_parse_and_map(pdev->dev.of_node, 0); 1067 ret = devm_request_irq(&pdev->dev, irq, aspeed_i2c_bus_irq, 1068 0, dev_name(&pdev->dev), bus); 1069 if (ret < 0) 1070 return ret; 1071 1072 ret = i2c_add_adapter(&bus->adap); 1073 if (ret < 0) 1074 return ret; 1075 1076 platform_set_drvdata(pdev, bus); 1077 1078 dev_info(bus->dev, "i2c bus %d registered, irq %d\n", 1079 bus->adap.nr, irq); 1080 1081 return 0; 1082} 1083 1084static void aspeed_i2c_remove_bus(struct platform_device *pdev) 1085{ 1086 struct aspeed_i2c_bus *bus = platform_get_drvdata(pdev); 1087 unsigned long flags; 1088 1089 spin_lock_irqsave(&bus->lock, flags); 1090 1091 /* Disable everything. */ 1092 writel(0, bus->base + ASPEED_I2C_FUN_CTRL_REG); 1093 writel(0, bus->base + ASPEED_I2C_INTR_CTRL_REG); 1094 1095 spin_unlock_irqrestore(&bus->lock, flags); 1096 1097 reset_control_assert(bus->rst); 1098 1099 i2c_del_adapter(&bus->adap); 1100} 1101 1102static struct platform_driver aspeed_i2c_bus_driver = { 1103 .probe = aspeed_i2c_probe_bus, 1104 .remove_new = aspeed_i2c_remove_bus, 1105 .driver = { 1106 .name = "aspeed-i2c-bus", 1107 .of_match_table = aspeed_i2c_bus_of_table, 1108 }, 1109}; 1110module_platform_driver(aspeed_i2c_bus_driver); 1111 1112MODULE_AUTHOR("Brendan Higgins <brendanhiggins@google.com>"); 1113MODULE_DESCRIPTION("Aspeed I2C Bus Driver"); 1114MODULE_LICENSE("GPL v2"); 1115