1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Raspberry Pi voltage sensor driver
4 *
5 * Based on firmware/raspberrypi.c by Noralf Trønnes
6 *
7 * Copyright (C) 2018 Stefan Wahren <stefan.wahren@i2se.com>
8 */
9#include <linux/device.h>
10#include <linux/devm-helpers.h>
11#include <linux/err.h>
12#include <linux/hwmon.h>
13#include <linux/module.h>
14#include <linux/platform_device.h>
15#include <linux/slab.h>
16#include <linux/workqueue.h>
17#include <soc/bcm2835/raspberrypi-firmware.h>
18
19#define UNDERVOLTAGE_STICKY_BIT	BIT(16)
20
21struct rpi_hwmon_data {
22	struct device *hwmon_dev;
23	struct rpi_firmware *fw;
24	u32 last_throttled;
25	struct delayed_work get_values_poll_work;
26};
27
28static void rpi_firmware_get_throttled(struct rpi_hwmon_data *data)
29{
30	u32 new_uv, old_uv, value;
31	int ret;
32
33	/* Request firmware to clear sticky bits */
34	value = 0xffff;
35
36	ret = rpi_firmware_property(data->fw, RPI_FIRMWARE_GET_THROTTLED,
37				    &value, sizeof(value));
38	if (ret) {
39		dev_err_once(data->hwmon_dev, "Failed to get throttled (%d)\n",
40			     ret);
41		return;
42	}
43
44	new_uv = value & UNDERVOLTAGE_STICKY_BIT;
45	old_uv = data->last_throttled & UNDERVOLTAGE_STICKY_BIT;
46	data->last_throttled = value;
47
48	if (new_uv == old_uv)
49		return;
50
51	if (new_uv)
52		dev_crit(data->hwmon_dev, "Undervoltage detected!\n");
53	else
54		dev_info(data->hwmon_dev, "Voltage normalised\n");
55
56	hwmon_notify_event(data->hwmon_dev, hwmon_in, hwmon_in_lcrit_alarm, 0);
57}
58
59static void get_values_poll(struct work_struct *work)
60{
61	struct rpi_hwmon_data *data;
62
63	data = container_of(work, struct rpi_hwmon_data,
64			    get_values_poll_work.work);
65
66	rpi_firmware_get_throttled(data);
67
68	/*
69	 * We can't run faster than the sticky shift (100ms) since we get
70	 * flipping in the sticky bits that are cleared.
71	 */
72	schedule_delayed_work(&data->get_values_poll_work, 2 * HZ);
73}
74
75static int rpi_read(struct device *dev, enum hwmon_sensor_types type,
76		    u32 attr, int channel, long *val)
77{
78	struct rpi_hwmon_data *data = dev_get_drvdata(dev);
79
80	*val = !!(data->last_throttled & UNDERVOLTAGE_STICKY_BIT);
81	return 0;
82}
83
84static umode_t rpi_is_visible(const void *_data, enum hwmon_sensor_types type,
85			      u32 attr, int channel)
86{
87	return 0444;
88}
89
90static const struct hwmon_channel_info * const rpi_info[] = {
91	HWMON_CHANNEL_INFO(in,
92			   HWMON_I_LCRIT_ALARM),
93	NULL
94};
95
96static const struct hwmon_ops rpi_hwmon_ops = {
97	.is_visible = rpi_is_visible,
98	.read = rpi_read,
99};
100
101static const struct hwmon_chip_info rpi_chip_info = {
102	.ops = &rpi_hwmon_ops,
103	.info = rpi_info,
104};
105
106static int rpi_hwmon_probe(struct platform_device *pdev)
107{
108	struct device *dev = &pdev->dev;
109	struct rpi_hwmon_data *data;
110	int ret;
111
112	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
113	if (!data)
114		return -ENOMEM;
115
116	/* Parent driver assure that firmware is correct */
117	data->fw = dev_get_drvdata(dev->parent);
118
119	data->hwmon_dev = devm_hwmon_device_register_with_info(dev, "rpi_volt",
120							       data,
121							       &rpi_chip_info,
122							       NULL);
123	if (IS_ERR(data->hwmon_dev))
124		return PTR_ERR(data->hwmon_dev);
125
126	ret = devm_delayed_work_autocancel(dev, &data->get_values_poll_work,
127					   get_values_poll);
128	if (ret)
129		return ret;
130	platform_set_drvdata(pdev, data);
131
132	schedule_delayed_work(&data->get_values_poll_work, 2 * HZ);
133
134	return 0;
135}
136
137static struct platform_driver rpi_hwmon_driver = {
138	.probe = rpi_hwmon_probe,
139	.driver = {
140		.name = "raspberrypi-hwmon",
141	},
142};
143module_platform_driver(rpi_hwmon_driver);
144
145MODULE_AUTHOR("Stefan Wahren <wahrenst@gmx.net>");
146MODULE_DESCRIPTION("Raspberry Pi voltage sensor driver");
147MODULE_LICENSE("GPL v2");
148MODULE_ALIAS("platform:raspberrypi-hwmon");
149