xref: /kernel/linux/linux-6.6/drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h

/* SPDX-License-Identifier: GPL-2.0+ OR MIT */
/**************************************************************************
 *
 * Copyright 2016-2021 VMware, Inc., Palo Alto, CA., USA
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the
 * "Software"), to deal in the Software without restriction, including
 * without limitation the rights to use, copy, modify, merge, publish,
 * distribute, sub license, and/or sell copies of the Software, and to
 * permit persons to whom the Software is furnished to do so, subject to
 * the following conditions:
 *
 * The above copyright notice and this permission notice (including the
 * next paragraph) shall be included in all copies or substantial portions
 * of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
 * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
 * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
 * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
 * USE OR OTHER DEALINGS IN THE SOFTWARE.
 *
 **************************************************************************
 *
 * Based on code from vmware.c and vmmouse.c.
 * Author:
 *   Sinclair Yeh <syeh@vmware.com>
 */
#ifndef _VMWGFX_MSG_X86_H
#define _VMWGFX_MSG_X86_H


#if defined(__i386__) || defined(__x86_64__)

#include <asm/vmware.h>

/**
 * Hypervisor-specific bi-directional communication channel.  Should never
 * execute on bare metal hardware.  The caller must make sure to check for
 * supported hypervisor before using these macros.
 *
 * The last two parameters are both input and output and must be initialized.
 *
 * @cmd: [IN] Message Cmd
 * @in_ebx: [IN] Message Len, through EBX
 * @in_si: [IN] Input argument through SI, set to 0 if not used
 * @in_di: [IN] Input argument through DI, set ot 0 if not used
 * @flags: [IN] hypercall flags + [channel id]
 * @magic: [IN] hypervisor magic value
 * @eax: [OUT] value of EAX register
 * @ebx: [OUT] e.g. status from an HB message status command
 * @ecx: [OUT] e.g. status from a non-HB message status command
 * @edx: [OUT] e.g. channel id
 * @si:  [OUT]
 * @di:  [OUT]
 */
#define VMW_PORT(cmd, in_ebx, in_si, in_di,	\
                 flags, magic,		\
                 eax, ebx, ecx, edx, si, di)	\
({						\
        asm volatile (VMWARE_HYPERCALL :	\
                "=a"(eax),			\
                "=b"(ebx),			\
                "=c"(ecx),			\
                "=d"(edx),			\
                "=S"(si),			\
                "=D"(di) :			\
                "a"(magic),			\
                "b"(in_ebx),			\
                "c"(cmd),			\
                "d"(flags),			\
                "S"(in_si),			\
                "D"(in_di) :			\
                "memory");			\
})


/**
 * Hypervisor-specific bi-directional communication channel.  Should never
 * execute on bare metal hardware.  The caller must make sure to check for
 * supported hypervisor before using these macros.
 *
 * The last 3 parameters are both input and output and must be initialized.
 *
 * @cmd: [IN] Message Cmd
 * @in_ecx: [IN] Message Len, through ECX
 * @in_si: [IN] Input argument through SI, set to 0 if not used
 * @in_di: [IN] Input argument through DI, set to 0 if not used
 * @flags: [IN] hypercall flags + [channel id]
 * @magic: [IN] hypervisor magic value
 * @bp:  [IN]
 * @eax: [OUT] value of EAX register
 * @ebx: [OUT] e.g. status from an HB message status command
 * @ecx: [OUT] e.g. status from a non-HB message status command
 * @edx: [OUT] e.g. channel id
 * @si:  [OUT]
 * @di:  [OUT]
 */
#ifdef __x86_64__

#define VMW_PORT_HB_OUT(cmd, in_ecx, in_si, in_di,	\
                        flags, magic, bp,		\
                        eax, ebx, ecx, edx, si, di)	\
({							\
        asm volatile (					\
		UNWIND_HINT_SAVE			\
		"push %%rbp;"				\
		UNWIND_HINT_UNDEFINED			\
                "mov %12, %%rbp;"			\
                VMWARE_HYPERCALL_HB_OUT			\
                "pop %%rbp;"				\
		UNWIND_HINT_RESTORE :			\
                "=a"(eax),				\
                "=b"(ebx),				\
                "=c"(ecx),				\
                "=d"(edx),				\
                "=S"(si),				\
                "=D"(di) :				\
                "a"(magic),				\
                "b"(cmd),				\
                "c"(in_ecx),				\
                "d"(flags),				\
                "S"(in_si),				\
                "D"(in_di),				\
                "r"(bp) :				\
                "memory", "cc");			\
})


#define VMW_PORT_HB_IN(cmd, in_ecx, in_si, in_di,	\
                       flags, magic, bp,		\
                       eax, ebx, ecx, edx, si, di)	\
({							\
        asm volatile (					\
		UNWIND_HINT_SAVE			\
		"push %%rbp;"				\
		UNWIND_HINT_UNDEFINED			\
                "mov %12, %%rbp;"			\
                VMWARE_HYPERCALL_HB_IN			\
                "pop %%rbp;"				\
		UNWIND_HINT_RESTORE :			\
                "=a"(eax),				\
                "=b"(ebx),				\
                "=c"(ecx),				\
                "=d"(edx),				\
                "=S"(si),				\
                "=D"(di) :				\
                "a"(magic),				\
                "b"(cmd),				\
                "c"(in_ecx),				\
                "d"(flags),				\
                "S"(in_si),				\
                "D"(in_di),				\
                "r"(bp) :				\
                "memory", "cc");			\
})

#elif defined(__i386__)

/*
 * In the 32-bit version of this macro, we store bp in a memory location
 * because we've ran out of registers.
 * Now we can't reference that memory location while we've modified
 * %esp or %ebp, so we first push it on the stack, just before we push
 * %ebp, and then when we need it we read it from the stack where we
 * just pushed it.
 */
#define VMW_PORT_HB_OUT(cmd, in_ecx, in_si, in_di,	\
                        flags, magic, bp,		\
                        eax, ebx, ecx, edx, si, di)	\
({							\
        asm volatile ("push %12;"			\
                "push %%ebp;"				\
                "mov 0x04(%%esp), %%ebp;"		\
                VMWARE_HYPERCALL_HB_OUT			\
                "pop %%ebp;"				\
                "add $0x04, %%esp;" :			\
                "=a"(eax),				\
                "=b"(ebx),				\
                "=c"(ecx),				\
                "=d"(edx),				\
                "=S"(si),				\
                "=D"(di) :				\
                "a"(magic),				\
                "b"(cmd),				\
                "c"(in_ecx),				\
                "d"(flags),				\
                "S"(in_si),				\
                "D"(in_di),				\
                "m"(bp) :				\
                "memory", "cc");			\
})


#define VMW_PORT_HB_IN(cmd, in_ecx, in_si, in_di,	\
                       flags, magic, bp,		\
                       eax, ebx, ecx, edx, si, di)	\
({							\
        asm volatile ("push %12;"			\
                "push %%ebp;"				\
                "mov 0x04(%%esp), %%ebp;"		\
                VMWARE_HYPERCALL_HB_IN			\
                "pop %%ebp;"				\
                "add $0x04, %%esp;" :			\
                "=a"(eax),				\
                "=b"(ebx),				\
                "=c"(ecx),				\
                "=d"(edx),				\
                "=S"(si),				\
                "=D"(di) :				\
                "a"(magic),				\
                "b"(cmd),				\
                "c"(in_ecx),				\
                "d"(flags),				\
                "S"(in_si),				\
                "D"(in_di),				\
                "m"(bp) :				\
                "memory", "cc");			\
})
#endif /* defined(__i386__) */

#endif /* defined(__i386__) || defined(__x86_64__) */

#endif /* _VMWGFX_MSG_X86_H */