xref: /kernel/linux/linux-6.6/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi

/*
 * T1040/T1042 Silicon/SoC Device Tree Source (pre include)
 *
 * Copyright 2013-2014 Freescale Semiconductor Inc.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *     * Redistributions of source code must retain the above copyright
 *	 notice, this list of conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above copyright
 *	 notice, this list of conditions and the following disclaimer in the
 *	 documentation and/or other materials provided with the distribution.
 *     * Neither the name of Freescale Semiconductor nor the
 *	 names of its contributors may be used to endorse or promote products
 *	 derived from this software without specific prior written permission.
 *
 *
 * ALTERNATIVELY, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") as published by the Free Software
 * Foundation, either version 2 of that License or (at your option) any
 * later version.
 *
 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/dts-v1/;

/include/ "e5500_power_isa.dtsi"

/ {
	#address-cells = <2>;
	#size-cells = <2>;
	interrupt-parent = <&mpic>;

	aliases {
		ccsr = &soc;
		dcsr = &dcsr;

		serial0 = &serial0;
		serial1 = &serial1;
		serial2 = &serial2;
		serial3 = &serial3;
		pci0 = &pci0;
		pci1 = &pci1;
		pci2 = &pci2;
		pci3 = &pci3;
		usb0 = &usb0;
		usb1 = &usb1;
		sdhc = &sdhc;

		crypto = &crypto;

		fman0 = &fman0;
		ethernet0 = &enet0;
		ethernet1 = &enet1;
		ethernet2 = &enet2;
		ethernet3 = &enet3;
		ethernet4 = &enet4;
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu0: PowerPC,e5500@0 {
			device_type = "cpu";
			reg = <0>;
			clocks = <&clockgen 1 0>;
			next-level-cache = <&L2_1>;
			#cooling-cells = <2>;
			L2_1: l2-cache {
				next-level-cache = <&cpc>;
			};
		};
		cpu1: PowerPC,e5500@1 {
			device_type = "cpu";
			reg = <1>;
			clocks = <&clockgen 1 1>;
			next-level-cache = <&L2_2>;
			#cooling-cells = <2>;
			L2_2: l2-cache {
				next-level-cache = <&cpc>;
			};
		};
		cpu2: PowerPC,e5500@2 {
			device_type = "cpu";
			reg = <2>;
			clocks = <&clockgen 1 2>;
			next-level-cache = <&L2_3>;
			#cooling-cells = <2>;
			L2_3: l2-cache {
				next-level-cache = <&cpc>;
			};
		};
		cpu3: PowerPC,e5500@3 {
			device_type = "cpu";
			reg = <3>;
			clocks = <&clockgen 1 3>;
			next-level-cache = <&L2_4>;
			#cooling-cells = <2>;
			L2_4: l2-cache {
				next-level-cache = <&cpc>;
			};
		};
	};
};