1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Copyright 2012 Freescale Semiconductor, Inc.
4 * Copyright 2012 Linaro Ltd.
5 */
6
7#include <linux/clk.h>
8#include <linux/clk/mxs.h>
9#include <linux/clkdev.h>
10#include <linux/delay.h>
11#include <linux/err.h>
12#include <linux/gpio.h>
13#include <linux/init.h>
14#include <linux/reboot.h>
15#include <linux/micrel_phy.h>
16#include <linux/of_address.h>
17#include <linux/of_platform.h>
18#include <linux/phy.h>
19#include <linux/sys_soc.h>
20#include <asm/mach/arch.h>
21#include <asm/mach/map.h>
22#include <asm/mach/time.h>
23#include <asm/system_info.h>
24#include <asm/system_misc.h>
25
26#include "pm.h"
27
28/* MXS DIGCTL SAIF CLKMUX */
29#define MXS_DIGCTL_SAIF_CLKMUX_DIRECT		0x0
30#define MXS_DIGCTL_SAIF_CLKMUX_CROSSINPUT	0x1
31#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0		0x2
32#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR1		0x3
33
34#define HW_DIGCTL_CHIPID	0x310
35#define HW_DIGCTL_CHIPID_MASK	(0xffff << 16)
36#define HW_DIGCTL_REV_MASK	0xff
37#define HW_DIGCTL_CHIPID_MX23	(0x3780 << 16)
38#define HW_DIGCTL_CHIPID_MX28	(0x2800 << 16)
39
40#define MXS_CHIP_REVISION_1_0	0x10
41#define MXS_CHIP_REVISION_1_1	0x11
42#define MXS_CHIP_REVISION_1_2	0x12
43#define MXS_CHIP_REVISION_1_3	0x13
44#define MXS_CHIP_REVISION_1_4	0x14
45#define MXS_CHIP_REV_UNKNOWN	0xff
46
47#define MXS_GPIO_NR(bank, nr)	((bank) * 32 + (nr))
48
49#define MXS_SET_ADDR		0x4
50#define MXS_CLR_ADDR		0x8
51#define MXS_TOG_ADDR		0xc
52
53#define HW_OCOTP_OPS2		19	/* offset 0x150 */
54#define HW_OCOTP_OPS3		20	/* offset 0x160 */
55
56static u32 chipid;
57static u32 socid;
58
59static void __iomem *reset_addr;
60
61static inline void __mxs_setl(u32 mask, void __iomem *reg)
62{
63	__raw_writel(mask, reg + MXS_SET_ADDR);
64}
65
66static inline void __mxs_clrl(u32 mask, void __iomem *reg)
67{
68	__raw_writel(mask, reg + MXS_CLR_ADDR);
69}
70
71static inline void __mxs_togl(u32 mask, void __iomem *reg)
72{
73	__raw_writel(mask, reg + MXS_TOG_ADDR);
74}
75
76#define OCOTP_WORD_OFFSET		0x20
77#define OCOTP_WORD_COUNT		0x20
78
79#define BM_OCOTP_CTRL_BUSY		(1 << 8)
80#define BM_OCOTP_CTRL_ERROR		(1 << 9)
81#define BM_OCOTP_CTRL_RD_BANK_OPEN	(1 << 12)
82
83static DEFINE_MUTEX(ocotp_mutex);
84static u32 ocotp_words[OCOTP_WORD_COUNT];
85
86static const u32 *mxs_get_ocotp(void)
87{
88	struct device_node *np;
89	void __iomem *ocotp_base;
90	int timeout = 0x400;
91	size_t i;
92	static int once;
93
94	if (once)
95		return ocotp_words;
96
97	np = of_find_compatible_node(NULL, NULL, "fsl,ocotp");
98	ocotp_base = of_iomap(np, 0);
99	WARN_ON(!ocotp_base);
100
101	mutex_lock(&ocotp_mutex);
102
103	/*
104	 * clk_enable(hbus_clk) for ocotp can be skipped
105	 * as it must be on when system is running.
106	 */
107
108	/* try to clear ERROR bit */
109	__mxs_clrl(BM_OCOTP_CTRL_ERROR, ocotp_base);
110
111	/* check both BUSY and ERROR cleared */
112	while ((__raw_readl(ocotp_base) &
113		(BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR)) && --timeout)
114		cpu_relax();
115
116	if (unlikely(!timeout))
117		goto error_unlock;
118
119	/* open OCOTP banks for read */
120	__mxs_setl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base);
121
122	/* approximately wait 32 hclk cycles */
123	udelay(1);
124
125	/* poll BUSY bit becoming cleared */
126	timeout = 0x400;
127	while ((__raw_readl(ocotp_base) & BM_OCOTP_CTRL_BUSY) && --timeout)
128		cpu_relax();
129
130	if (unlikely(!timeout))
131		goto error_unlock;
132
133	for (i = 0; i < OCOTP_WORD_COUNT; i++)
134		ocotp_words[i] = __raw_readl(ocotp_base + OCOTP_WORD_OFFSET +
135						i * 0x10);
136
137	/* close banks for power saving */
138	__mxs_clrl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base);
139
140	once = 1;
141
142	mutex_unlock(&ocotp_mutex);
143
144	return ocotp_words;
145
146error_unlock:
147	mutex_unlock(&ocotp_mutex);
148	pr_err("%s: timeout in reading OCOTP\n", __func__);
149	return NULL;
150}
151
152enum mac_oui {
153	OUI_FSL,
154	OUI_DENX,
155	OUI_CRYSTALFONTZ,
156	OUI_I2SE,
157	OUI_ARMADEUS,
158};
159
160static void __init update_fec_mac_prop(enum mac_oui oui)
161{
162	struct device_node *np, *from = NULL;
163	struct property *newmac;
164	const u32 *ocotp = mxs_get_ocotp();
165	u8 *macaddr;
166	u32 val;
167	int i;
168
169	for (i = 0; i < 2; i++) {
170		np = of_find_compatible_node(from, NULL, "fsl,imx28-fec");
171		if (!np)
172			return;
173
174		from = np;
175
176		if (of_property_present(np, "local-mac-address"))
177			continue;
178
179		newmac = kzalloc(sizeof(*newmac) + 6, GFP_KERNEL);
180		if (!newmac)
181			return;
182		newmac->value = newmac + 1;
183		newmac->length = 6;
184
185		newmac->name = kstrdup("local-mac-address", GFP_KERNEL);
186		if (!newmac->name) {
187			kfree(newmac);
188			return;
189		}
190
191		/*
192		 * OCOTP only stores the last 4 octets for each mac address,
193		 * so hard-code OUI here.
194		 */
195		macaddr = newmac->value;
196		switch (oui) {
197		case OUI_FSL:
198			macaddr[0] = 0x00;
199			macaddr[1] = 0x04;
200			macaddr[2] = 0x9f;
201			break;
202		case OUI_DENX:
203			macaddr[0] = 0xc0;
204			macaddr[1] = 0xe5;
205			macaddr[2] = 0x4e;
206			break;
207		case OUI_CRYSTALFONTZ:
208			macaddr[0] = 0x58;
209			macaddr[1] = 0xb9;
210			macaddr[2] = 0xe1;
211			break;
212		case OUI_I2SE:
213			macaddr[0] = 0x00;
214			macaddr[1] = 0x01;
215			macaddr[2] = 0x87;
216			break;
217		case OUI_ARMADEUS:
218			macaddr[0] = 0x00;
219			macaddr[1] = 0x1e;
220			macaddr[2] = 0xac;
221			break;
222		}
223		val = ocotp[i];
224		macaddr[3] = (val >> 16) & 0xff;
225		macaddr[4] = (val >> 8) & 0xff;
226		macaddr[5] = (val >> 0) & 0xff;
227
228		of_update_property(np, newmac);
229	}
230}
231
232static inline void enable_clk_enet_out(void)
233{
234	struct clk *clk = clk_get_sys("enet_out", NULL);
235
236	if (!IS_ERR(clk))
237		clk_prepare_enable(clk);
238}
239
240static void __init imx28_evk_init(void)
241{
242	update_fec_mac_prop(OUI_FSL);
243
244	mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
245}
246
247static void __init imx28_apf28_init(void)
248{
249	update_fec_mac_prop(OUI_ARMADEUS);
250}
251
252static int apx4devkit_phy_fixup(struct phy_device *phy)
253{
254	phy->dev_flags |= MICREL_PHY_50MHZ_CLK;
255	return 0;
256}
257
258static void __init apx4devkit_init(void)
259{
260	enable_clk_enet_out();
261
262	if (IS_BUILTIN(CONFIG_PHYLIB))
263		phy_register_fixup_for_uid(PHY_ID_KSZ8051, MICREL_PHY_ID_MASK,
264					   apx4devkit_phy_fixup);
265}
266
267static void __init crystalfontz_init(void)
268{
269	update_fec_mac_prop(OUI_CRYSTALFONTZ);
270}
271
272static void __init duckbill_init(void)
273{
274	update_fec_mac_prop(OUI_I2SE);
275}
276
277static void __init m28cu3_init(void)
278{
279	update_fec_mac_prop(OUI_DENX);
280}
281
282static const char __init *mxs_get_soc_id(void)
283{
284	struct device_node *np;
285	void __iomem *digctl_base;
286
287	np = of_find_compatible_node(NULL, NULL, "fsl,imx23-digctl");
288	digctl_base = of_iomap(np, 0);
289	WARN_ON(!digctl_base);
290
291	chipid = readl(digctl_base + HW_DIGCTL_CHIPID);
292	socid = chipid & HW_DIGCTL_CHIPID_MASK;
293
294	iounmap(digctl_base);
295	of_node_put(np);
296
297	switch (socid) {
298	case HW_DIGCTL_CHIPID_MX23:
299		return "i.MX23";
300	case HW_DIGCTL_CHIPID_MX28:
301		return "i.MX28";
302	default:
303		return "Unknown";
304	}
305}
306
307static u32 __init mxs_get_cpu_rev(void)
308{
309	u32 rev = chipid & HW_DIGCTL_REV_MASK;
310
311	switch (socid) {
312	case HW_DIGCTL_CHIPID_MX23:
313		switch (rev) {
314		case 0x0:
315			return MXS_CHIP_REVISION_1_0;
316		case 0x1:
317			return MXS_CHIP_REVISION_1_1;
318		case 0x2:
319			return MXS_CHIP_REVISION_1_2;
320		case 0x3:
321			return MXS_CHIP_REVISION_1_3;
322		case 0x4:
323			return MXS_CHIP_REVISION_1_4;
324		default:
325			return MXS_CHIP_REV_UNKNOWN;
326		}
327	case HW_DIGCTL_CHIPID_MX28:
328		switch (rev) {
329		case 0x0:
330			return MXS_CHIP_REVISION_1_1;
331		case 0x1:
332			return MXS_CHIP_REVISION_1_2;
333		default:
334			return MXS_CHIP_REV_UNKNOWN;
335		}
336	default:
337		return MXS_CHIP_REV_UNKNOWN;
338	}
339}
340
341static const char __init *mxs_get_revision(void)
342{
343	u32 rev = mxs_get_cpu_rev();
344
345	if (rev != MXS_CHIP_REV_UNKNOWN)
346		return kasprintf(GFP_KERNEL, "%d.%d", (rev >> 4) & 0xf,
347				rev & 0xf);
348	else
349		return kasprintf(GFP_KERNEL, "%s", "Unknown");
350}
351
352#define MX23_CLKCTRL_RESET_OFFSET	0x120
353#define MX28_CLKCTRL_RESET_OFFSET	0x1e0
354
355static int __init mxs_restart_init(void)
356{
357	struct device_node *np;
358
359	np = of_find_compatible_node(NULL, NULL, "fsl,clkctrl");
360	reset_addr = of_iomap(np, 0);
361	if (!reset_addr)
362		return -ENODEV;
363
364	if (of_device_is_compatible(np, "fsl,imx23-clkctrl"))
365		reset_addr += MX23_CLKCTRL_RESET_OFFSET;
366	else
367		reset_addr += MX28_CLKCTRL_RESET_OFFSET;
368	of_node_put(np);
369
370	return 0;
371}
372
373static void __init eukrea_mbmx283lc_init(void)
374{
375	mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
376}
377
378static void __init mxs_machine_init(void)
379{
380	struct device_node *root;
381	struct device *parent;
382	struct soc_device *soc_dev;
383	struct soc_device_attribute *soc_dev_attr;
384	u64 soc_uid = 0;
385	const u32 *ocotp = mxs_get_ocotp();
386	int ret;
387
388	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
389	if (!soc_dev_attr)
390		return;
391
392	root = of_find_node_by_path("/");
393	ret = of_property_read_string(root, "model", &soc_dev_attr->machine);
394	if (ret) {
395		kfree(soc_dev_attr);
396		return;
397	}
398
399	soc_dev_attr->family = "Freescale MXS Family";
400	soc_dev_attr->soc_id = mxs_get_soc_id();
401	soc_dev_attr->revision = mxs_get_revision();
402
403	if (socid == HW_DIGCTL_CHIPID_MX23) {
404		soc_uid = system_serial_low = ocotp[HW_OCOTP_OPS3];
405	} else if (socid == HW_DIGCTL_CHIPID_MX28) {
406		soc_uid = system_serial_high = ocotp[HW_OCOTP_OPS2];
407		soc_uid <<= 32;
408		system_serial_low = ocotp[HW_OCOTP_OPS3];
409		soc_uid |= system_serial_low;
410	}
411
412	if (soc_uid)
413		soc_dev_attr->serial_number = kasprintf(GFP_KERNEL, "%016llX", soc_uid);
414
415	soc_dev = soc_device_register(soc_dev_attr);
416	if (IS_ERR(soc_dev)) {
417		kfree(soc_dev_attr->serial_number);
418		kfree(soc_dev_attr->revision);
419		kfree(soc_dev_attr);
420		return;
421	}
422
423	parent = soc_device_to_device(soc_dev);
424
425	if (of_machine_is_compatible("fsl,imx28-evk"))
426		imx28_evk_init();
427	if (of_machine_is_compatible("armadeus,imx28-apf28"))
428		imx28_apf28_init();
429	else if (of_machine_is_compatible("bluegiga,apx4devkit"))
430		apx4devkit_init();
431	else if (of_machine_is_compatible("crystalfontz,cfa10036"))
432		crystalfontz_init();
433	else if (of_machine_is_compatible("eukrea,mbmx283lc"))
434		eukrea_mbmx283lc_init();
435	else if (of_machine_is_compatible("i2se,duckbill") ||
436		 of_machine_is_compatible("i2se,duckbill-2"))
437		duckbill_init();
438	else if (of_machine_is_compatible("msr,m28cu3"))
439		m28cu3_init();
440
441	of_platform_default_populate(NULL, NULL, parent);
442
443	mxs_restart_init();
444}
445
446#define MXS_CLKCTRL_RESET_CHIP		(1 << 1)
447
448/*
449 * Reset the system. It is called by machine_restart().
450 */
451static void mxs_restart(enum reboot_mode mode, const char *cmd)
452{
453	if (reset_addr) {
454		/* reset the chip */
455		__mxs_setl(MXS_CLKCTRL_RESET_CHIP, reset_addr);
456
457		pr_err("Failed to assert the chip reset\n");
458
459		/* Delay to allow the serial port to show the message */
460		mdelay(50);
461	}
462
463	/* We'll take a jump through zero as a poor second */
464	soft_restart(0);
465}
466
467static const char *const mxs_dt_compat[] __initconst = {
468	"fsl,imx28",
469	"fsl,imx23",
470	NULL,
471};
472
473DT_MACHINE_START(MXS, "Freescale MXS (Device Tree)")
474	.init_machine	= mxs_machine_init,
475	.init_late      = mxs_pm_init,
476	.dt_compat	= mxs_dt_compat,
477	.restart	= mxs_restart,
478MACHINE_END
479