xref: /kernel/linux/linux-6.6/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.yaml (revision 62306a36)

# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/brcm,bcm11351-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Broadcom BCM281xx pin controller

maintainers:
  - Florian Fainelli <florian.fainelli@broadcom.com>
  - Ray Jui <rjui@broadcom.com>
  - Scott Branden <sbranden@broadcom.com>

allOf:
  - $ref: pinctrl.yaml#

properties:
  compatible:
    const: brcm,bcm11351-pinctrl

  reg:
    maxItems: 1

patternProperties:
  '-pins$':
    type: object
    additionalProperties: false

    patternProperties:
      '-grp[0-9]$':
        type: object
        unevaluatedProperties: false

        properties:
          pins:
            description:
              Specifies the name(s) of one or more pins to be configured by
              this node.
            items:
              enum: [ adcsync, bat_rm, bsc1_scl, bsc1_sda, bsc2_scl, bsc2_sda,
                      classgpwr, clk_cx8, clkout_0, clkout_1, clkout_2,
                      clkout_3, clkreq_in_0, clkreq_in_1, cws_sys_req1,
                      cws_sys_req2, cws_sys_req3, digmic1_clk, digmic1_dq,
                      digmic2_clk, digmic2_dq, gpen13, gpen14, gpen15, gpio00,
                      gpio01, gpio02, gpio03, gpio04, gpio05, gpio06, gpio07,
                      gpio08, gpio09, gpio10, gpio11, gpio12, gpio13, gpio14,
                      gps_pablank, gps_tmark, hdmi_scl, hdmi_sda, ic_dm, ic_dp,
                      kp_col_ip_0, kp_col_ip_1, kp_col_ip_2, kp_col_ip_3,
                      kp_row_op_0, kp_row_op_1, kp_row_op_2, kp_row_op_3,
                      lcd_b_0, lcd_b_1, lcd_b_2, lcd_b_3, lcd_b_4, lcd_b_5,
                      lcd_b_6, lcd_b_7, lcd_g_0, lcd_g_1, lcd_g_2, lcd_g_3,
                      lcd_g_4, lcd_g_5, lcd_g_6, lcd_g_7, lcd_hsync, lcd_oe,
                      lcd_pclk, lcd_r_0, lcd_r_1, lcd_r_2, lcd_r_3, lcd_r_4,
                      lcd_r_5, lcd_r_6, lcd_r_7, lcd_vsync, mdmgpio0, mdmgpio1,
                      mdmgpio2, mdmgpio3, mdmgpio4, mdmgpio5, mdmgpio6,
                      mdmgpio7, mdmgpio8, mphi_data_0, mphi_data_1, mphi_data_2,
                      mphi_data_3, mphi_data_4, mphi_data_5, mphi_data_6,
                      mphi_data_7, mphi_data_8, mphi_data_9, mphi_data_10,
                      mphi_data_11, mphi_data_12, mphi_data_13, mphi_data_14,
                      mphi_data_15, mphi_ha0, mphi_hat0, mphi_hat1, mphi_hce0_n,
                      mphi_hce1_n, mphi_hrd_n, mphi_hwr_n, mphi_run0, mphi_run1,
                      mtx_scan_clk, mtx_scan_data, nand_ad_0, nand_ad_1,
                      nand_ad_2, nand_ad_3, nand_ad_4, nand_ad_5, nand_ad_6,
                      nand_ad_7, nand_ale, nand_cen_0, nand_cen_1, nand_cle,
                      nand_oen, nand_rdy_0, nand_rdy_1, nand_wen, nand_wp, pc1,
                      pc2, pmu_int, pmu_scl, pmu_sda, rfst2g_mtsloten3g,
                      rgmii_0_rx_ctl, rgmii_0_rxc, rgmii_0_rxd_0, rgmii_0_rxd_1,
                      rgmii_0_rxd_2, rgmii_0_rxd_3, rgmii_0_tx_ctl, rgmii_0_txc,
                      rgmii_0_txd_0, rgmii_0_txd_1, rgmii_0_txd_2,
                      rgmii_0_txd_3, rgmii_1_rx_ctl, rgmii_1_rxc, rgmii_1_rxd_0,
                      rgmii_1_rxd_1, rgmii_1_rxd_2, rgmii_1_rxd_3,
                      rgmii_1_tx_ctl, rgmii_1_txc, rgmii_1_txd_0, rgmii_1_txd_1,
                      rgmii_1_txd_2, rgmii_1_txd_3, rgmii_gpio_0, rgmii_gpio_1,
                      rgmii_gpio_2, rgmii_gpio_3, rtxdata2g_txdata3g1,
                      rtxen2g_txdata3g2, rxdata3g0, rxdata3g1, rxdata3g2,
                      sdio1_clk, sdio1_cmd, sdio1_data_0, sdio1_data_1,
                      sdio1_data_2, sdio1_data_3, sdio4_clk, sdio4_cmd,
                      sdio4_data_0, sdio4_data_1, sdio4_data_2, sdio4_data_3,
                      sim_clk, sim_data, sim_det, sim_resetn, sim2_clk,
                      sim2_data, sim2_det, sim2_resetn, sri_c, sri_d, sri_e,
                      ssp_extclk, ssp0_clk, ssp0_fs, ssp0_rxd, ssp0_txd,
                      ssp2_clk, ssp2_fs_0, ssp2_fs_1, ssp2_fs_2, ssp2_fs_3,
                      ssp2_rxd_0, ssp2_rxd_1, ssp2_txd_0, ssp2_txd_1, ssp3_clk,
                      ssp3_fs, ssp3_rxd, ssp3_txd, ssp4_clk, ssp4_fs, ssp4_rxd,
                      ssp4_txd, ssp5_clk, ssp5_fs, ssp5_rxd, ssp5_txd, ssp6_clk,
                      ssp6_fs, ssp6_rxd, ssp6_txd, stat_1, stat_2, sysclken,
                      traceclk, tracedt00, tracedt01, tracedt02, tracedt03,
                      tracedt04, tracedt05, tracedt06, tracedt07, tracedt08
                      tracedt09, tracedt10, tracedt11, tracedt12, tracedt13
                      tracedt14, tracedt15, txdata3g0, txpwrind, uartb1_ucts,
                      uartb1_urts, uartb1_urxd, uartb1_utxd, uartb2_urxd,
                      uartb2_utxd, uartb3_ucts, uartb3_urts, uartb3_urxd,
                      uartb3_utxd, uartb4_ucts, uartb4_urts, uartb4_urxd,
                      uartb4_utxd, vc_cam1_scl, vc_cam1_sda, vc_cam2_scl,
                      vc_cam2_sda, vc_cam3_scl, vc_cam3_sda ]

          function:
            description:
              Specifies the pin mux selection.
            enum: [ alt1, alt2, alt3, alt4 ]

          slew-rate:
            description: |
              Meaning depends on configured pin mux:
                *_scl or *_sda:
                  0: Standard (100 kbps) & Fast (400 kbps) mode
                  1: Highspeed (3.4 Mbps) mode
                ic_dm or ic_dp:
                  0: normal slew rate
                  1: fast slew rate
                Otherwise:
                  0: fast slew rate
                  1: normal slew rate

          bias-disable: true
          input-disable: true
          input-enable: true

        required:
          - pins

        allOf:
          - $ref: pincfg-node.yaml#

          # Optional properties for standard pins
          - if:
              properties:
                pins:
                  contains:
                    enum: [ adcsync, bat_rm, classgpwr, clk_cx8, clkout_0,
                            clkout_1, clkout_2, clkout_3, clkreq_in_0,
                            clkreq_in_1, cws_sys_req1, cws_sys_req2,
                            cws_sys_req3, digmic1_clk, digmic1_dq, digmic2_clk,
                            digmic2_dq, gpen13, gpen14, gpen15, gpio00, gpio01,
                            gpio02, gpio03, gpio04, gpio05, gpio06, gpio07,
                            gpio08, gpio09, gpio10, gpio11, gpio12, gpio13,
                            gpio14, gps_pablank, gps_tmark, ic_dm, ic_dp,
                            kp_col_ip_0, kp_col_ip_1, kp_col_ip_2, kp_col_ip_3,
                            kp_row_op_0, kp_row_op_1, kp_row_op_2, kp_row_op_3,
                            lcd_b_0, lcd_b_1, lcd_b_2, lcd_b_3, lcd_b_4, lcd_b_5,
                            lcd_b_6, lcd_b_7, lcd_g_0, lcd_g_1, lcd_g_2, lcd_g_3,
                            lcd_g_4, lcd_g_5, lcd_g_6, lcd_g_7, lcd_hsync,
                            lcd_oe, lcd_pclk, lcd_r_0, lcd_r_1, lcd_r_2,
                            lcd_r_3, lcd_r_4, lcd_r_5, lcd_r_6, lcd_r_7,
                            lcd_vsync, mdmgpio0, mdmgpio1, mdmgpio2, mdmgpio3,
                            mdmgpio4, mdmgpio5, mdmgpio6, mdmgpio7, mdmgpio8,
                            mphi_data_0, mphi_data_1, mphi_data_2, mphi_data_3,
                            mphi_data_4, mphi_data_5, mphi_data_6, mphi_data_7,
                            mphi_data_8, mphi_data_9, mphi_data_10,
                            mphi_data_11, mphi_data_12, mphi_data_13,
                            mphi_data_14, mphi_data_15, mphi_ha0, mphi_hat0,
                            mphi_hat1, mphi_hce0_n, mphi_hce1_n, mphi_hrd_n,
                            mphi_hwr_n, mphi_run0, mphi_run1, mtx_scan_clk,
                            mtx_scan_data, nand_ad_0, nand_ad_1, nand_ad_2,
                            nand_ad_3, nand_ad_4, nand_ad_5, nand_ad_6,
                            nand_ad_7, nand_ale, nand_cen_0, nand_cen_1,
                            nand_cle, nand_oen, nand_rdy_0, nand_rdy_1,
                            nand_wen, nand_wp, pc1, pc2, pmu_int,
                            rfst2g_mtsloten3g, rgmii_0_rx_ctl, rgmii_0_rxc,
                            rgmii_0_rxd_0, rgmii_0_rxd_1, rgmii_0_rxd_2,
                            rgmii_0_rxd_3, rgmii_0_tx_ctl, rgmii_0_txc,
                            rgmii_0_txd_0, rgmii_0_txd_1, rgmii_0_txd_2,
                            rgmii_0_txd_3, rgmii_1_rx_ctl, rgmii_1_rxc,
                            rgmii_1_rxd_0, rgmii_1_rxd_1, rgmii_1_rxd_2,
                            rgmii_1_rxd_3, rgmii_1_tx_ctl, rgmii_1_txc,
                            rgmii_1_txd_0, rgmii_1_txd_1, rgmii_1_txd_2,
                            rgmii_1_txd_3, rgmii_gpio_0, rgmii_gpio_1,
                            rgmii_gpio_2, rgmii_gpio_3, rtxdata2g_txdata3g1,
                            rtxen2g_txdata3g2, rxdata3g0, rxdata3g1, rxdata3g2,
                            sdio1_clk, sdio1_cmd, sdio1_data_0, sdio1_data_1,
                            sdio1_data_2, sdio1_data_3, sdio4_clk, sdio4_cmd,
                            sdio4_data_0, sdio4_data_1, sdio4_data_2,
                            sdio4_data_3, sim_clk, sim_data, sim_det,
                            sim_resetn, sim2_clk, sim2_data, sim2_det,
                            sim2_resetn, sri_c, sri_d, sri_e, ssp_extclk,
                            ssp0_clk, ssp0_fs, ssp0_rxd, ssp0_txd, ssp2_clk,
                            ssp2_fs_0, ssp2_fs_1, ssp2_fs_2, ssp2_fs_3,
                            ssp2_rxd_0, ssp2_rxd_1, ssp2_txd_0, ssp2_txd_1,
                            ssp3_clk, ssp3_fs, ssp3_rxd, ssp3_txd, ssp4_clk,
                            ssp4_fs, ssp4_rxd, ssp4_txd, ssp5_clk, ssp5_fs,
                            ssp5_rxd, ssp5_txd, ssp6_clk, ssp6_fs, ssp6_rxd,
                            ssp6_txd, stat_1, stat_2, sysclken, traceclk,
                            tracedt00, tracedt01, tracedt02, tracedt03,
                            tracedt04, tracedt05, tracedt06, tracedt07,
                            tracedt08, tracedt09, tracedt10, tracedt11,
                            tracedt12, tracedt13, tracedt14, tracedt15,
                            txdata3g0, txpwrind, uartb1_ucts, uartb1_urts,
                            uartb1_urxd, uartb1_utxd, uartb2_urxd, uartb2_utxd,
                            uartb3_ucts, uartb3_urts, uartb3_urxd, uartb3_utxd,
                            uartb4_ucts, uartb4_urts, uartb4_urxd, uartb4_utxd ]
            then:
              properties:
                drive-strength:
                  enum: [ 2, 4, 6, 8, 10, 12, 14, 16 ]

                bias-disable: true
                bias-pull-up: true
                bias-pull-down: true
                input-schmitt-enable: true
                input-schmitt-disable: true

          # Optional properties for I2C pins
          - if:
              properties:
                pins:
                  contains:
                    enum: [ bsc1_scl, bsc1_sda, bsc2_scl, bsc2_sda, pmu_scl,
                            pmu_sda, vc_cam1_scl, vc_cam1_sda, vc_cam2_scl,
                            vc_cam2_sda, vc_cam3_scl, vc_cam3_sda ]
            then:
              properties:
                bias-pull-up:
                  description:
                    There are 3 pull-up resistors (1.2k, 1.8k, 2.7k) available
                    in parallel for I2C pins.
                  enum: [ 568, 720, 831, 1080, 1200, 1800, 2700 ]

                bias-disable: true

required:
  - compatible
  - reg

unevaluatedProperties: false

examples:
  - |
    pinctrl@35004800 {
      compatible = "brcm,bcm11351-pinctrl";
      reg = <0x35004800 0x430>;

      dev-a-active-pins {
        /* group node defining 1 standard pin */
        std-grp0 {
          pins = "gpio00";
          function = "alt1";
          input-schmitt-enable;
          bias-disable;
          slew-rate = <1>;
          drive-strength = <4>;
        };

        /* group node defining 2 I2C pins */
        i2c-grp0 {
          pins = "bsc1_scl", "bsc1_sda";
          function = "alt2";
          bias-pull-up = <720>;
          input-enable;
        };

        /* group node defining 2 HDMI pins */
        hdmi-grp0 {
          pins = "hdmi_scl", "hdmi_sda";
          function = "alt3";
          slew-rate = <1>;
        };
      };
    };
...