xref: /kernel/linux/linux-6.6/Documentation/devicetree/bindings/mtd/mtd.yaml (revision 62306a36)

# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/mtd/mtd.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: MTD (Memory Technology Device)

maintainers:
  - Miquel Raynal <miquel.raynal@bootlin.com>
  - Richard Weinberger <richard@nod.at>

properties:
  $nodename:
    pattern: "^(flash|.*sram|nand)(@.*)?$"

  label:
    description:
      User-defined MTD device name. Can be used to assign user friendly
      names to MTD devices (instead of the flash model or flash controller
      based name) in order to ease flash device identification and/or
      describe what they are used for.

  '#address-cells':
    deprecated: true

  '#size-cells':
    deprecated: true

  partitions:
    $ref: /schemas/mtd/partitions/partitions.yaml

    required:
      - compatible

patternProperties:
  "@[0-9a-f]+$":
    $ref: partitions/partition.yaml
    deprecated: true

  "^partition@[0-9a-f]+":
    $ref: partitions/partition.yaml
    deprecated: true

  "^otp(-[0-9]+)?$":
    $ref: ../nvmem/nvmem.yaml#
    unevaluatedProperties: false

    description: |
      An OTP memory region. Some flashes provide a one-time-programmable
      memory whose content can either be programmed by a user or is already
      pre-programmed by the factory. Some flashes might provide both.

    properties:
      compatible:
        enum:
          - user-otp
          - factory-otp

    required:
      - compatible

# This is a generic file other binding inherit from
additionalProperties: true

examples:
  - |
    spi {
        #address-cells = <1>;
        #size-cells = <0>;

        flash@0 {
            reg = <0>;
            compatible = "jedec,spi-nor";
            label = "System-firmware";
        };
    };

  - |
    spi {
        #address-cells = <1>;
        #size-cells = <0>;

        flash@0 {
            reg = <0>;
            compatible = "jedec,spi-nor";

            otp-1 {
                compatible = "factory-otp";
                #address-cells = <1>;
                #size-cells = <1>;

                electronic-serial-number@0 {
                    reg = <0 8>;
                };
            };

            otp-2 {
                compatible = "user-otp";
                #address-cells = <1>;
                #size-cells = <1>;

                mac-address@0 {
                    reg = <0 6>;
                };
            };
        };
    };

...