xref: /kernel/linux/linux-6.6/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/mfd/kontron,sl28cpld.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Kontron's sl28cpld board management controller

maintainers:
  - Michael Walle <michael@walle.cc>

description: |
  The board management controller may contain different IP blocks like
  watchdog, fan monitoring, PWM controller, interrupt controller and a
  GPIO controller.

properties:
  compatible:
    const: kontron,sl28cpld

  reg:
    description:
      I2C device address.
    maxItems: 1

  "#address-cells":
    const: 1

  "#size-cells":
    const: 0

  "#interrupt-cells":
    const: 2

  interrupts:
    maxItems: 1

  interrupt-controller: true

patternProperties:
  "^gpio(@[0-9a-f]+)?$":
    $ref: ../gpio/kontron,sl28cpld-gpio.yaml

  "^hwmon(@[0-9a-f]+)?$":
    $ref: ../hwmon/kontron,sl28cpld-hwmon.yaml

  "^interrupt-controller(@[0-9a-f]+)?$":
    $ref: ../interrupt-controller/kontron,sl28cpld-intc.yaml

  "^pwm(@[0-9a-f]+)?$":
    $ref: ../pwm/kontron,sl28cpld-pwm.yaml

  "^watchdog(@[0-9a-f]+)?$":
    $ref: ../watchdog/kontron,sl28cpld-wdt.yaml

required:
  - "#address-cells"
  - "#size-cells"
  - compatible
  - reg

additionalProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/irq.h>
    i2c {
        #address-cells = <1>;
        #size-cells = <0>;

        sl28cpld@4a {
            compatible = "kontron,sl28cpld";
            reg = <0x4a>;
            #address-cells = <1>;
            #size-cells = <0>;

            watchdog@4 {
                compatible = "kontron,sl28cpld-wdt";
                reg = <0x4>;
                kontron,assert-wdt-timeout-pin;
            };

            hwmon@b {
                compatible = "kontron,sl28cpld-fan";
                reg = <0xb>;
            };

            pwm@c {
                compatible = "kontron,sl28cpld-pwm";
                reg = <0xc>;
                #pwm-cells = <2>;
            };

            pwm@e {
                compatible = "kontron,sl28cpld-pwm";
                reg = <0xe>;
                #pwm-cells = <2>;
            };

            gpio@10 {
                compatible = "kontron,sl28cpld-gpio";
                reg = <0x10>;
                interrupts-extended = <&gpio2 6
                               IRQ_TYPE_EDGE_FALLING>;

                gpio-controller;
                #gpio-cells = <2>;
                gpio-line-names = "a", "b", "c";

                interrupt-controller;
                #interrupt-cells = <2>;
            };

            gpio@15 {
                compatible = "kontron,sl28cpld-gpio";
                reg = <0x15>;
                interrupts-extended = <&gpio2 6
                               IRQ_TYPE_EDGE_FALLING>;

                gpio-controller;
                #gpio-cells = <2>;

                interrupt-controller;
                #interrupt-cells = <2>;
            };

            gpio@1a {
                compatible = "kontron,sl28cpld-gpo";
                reg = <0x1a>;

                gpio-controller;
                #gpio-cells = <2>;
            };

            gpio@1b {
                compatible = "kontron,sl28cpld-gpi";
                reg = <0x1b>;

                gpio-controller;
                #gpio-cells = <2>;
            };

            interrupt-controller@1c {
                compatible = "kontron,sl28cpld-intc";
                reg = <0x1c>;
                interrupts-extended = <&gpio2 6
                               IRQ_TYPE_EDGE_FALLING>;

                interrupt-controller;
                #interrupt-cells = <2>;
            };
        };
    };