xref: /kernel/linux/linux-6.6/Documentation/devicetree/bindings/iio/pressure/hoperf,hp03.yaml

# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/pressure/hoperf,hp03.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: HopeRF HP03 digital pressure/temperature sensors

maintainers:
  - Marek Vasut <marex@denx.de>

description: |
  Digital pressure and temperature sensor with an I2C interface.

properties:
  compatible:
    const: hoperf,hp03

  reg:
    maxItems: 1

  xclr-gpios:
    description:
      The XCLR pin is a reset of the ADC in the chip, it must be pulled
      HI before the conversion and readout of the value from the ADC
      registers and pulled LO afterward.
    maxItems: 1

required:
  - compatible
  - reg

additionalProperties: false

examples:
  - |
    i2c {
        #address-cells = <1>;
        #size-cells = <0>;

        pressure@77 {
            compatible = "hoperf,hp03";
            reg = <0x77>;
            xclr-gpios = <&portc 0 0x0>;
        };
    };
...