162306a36Sopenharmony_ci*LM87 hwmon sensor.
262306a36Sopenharmony_ci
362306a36Sopenharmony_ciRequired properties:
462306a36Sopenharmony_ci- compatible: Should be
562306a36Sopenharmony_ci	"ti,lm87"
662306a36Sopenharmony_ci
762306a36Sopenharmony_ci- reg: I2C address
862306a36Sopenharmony_ci
962306a36Sopenharmony_cioptional properties:
1062306a36Sopenharmony_ci- has-temp3: This configures pins 18 and 19 to be used as a second
1162306a36Sopenharmony_ci             remote temperature sensing channel. By default the pins
1262306a36Sopenharmony_ci             are configured as voltage input pins in0 and in5.
1362306a36Sopenharmony_ci
1462306a36Sopenharmony_ci- has-in6: When set, pin 5 is configured to be used as voltage input
1562306a36Sopenharmony_ci           in6. Otherwise the pin is set as FAN1 input.
1662306a36Sopenharmony_ci
1762306a36Sopenharmony_ci- has-in7: When set, pin 6 is configured to be used as voltage input
1862306a36Sopenharmony_ci           in7. Otherwise the pin is set as FAN2 input.
1962306a36Sopenharmony_ci
2062306a36Sopenharmony_ci- vcc-supply: a Phandle for the regulator supplying power, can be
2162306a36Sopenharmony_ci              configured to measure 5.0V power supply. Default is 3.3V.
2262306a36Sopenharmony_ci
2362306a36Sopenharmony_ciExample:
2462306a36Sopenharmony_ci
2562306a36Sopenharmony_cilm87@2e {
2662306a36Sopenharmony_ci	compatible = "ti,lm87";
2762306a36Sopenharmony_ci	reg = <0x2e>;
2862306a36Sopenharmony_ci	has-temp3;
2962306a36Sopenharmony_ci	vcc-supply = <&reg_5v0>;
3062306a36Sopenharmony_ci};
31