xref: /kernel/linux/linux-6.6/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml

# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/msm/qcom,sm6115-dpu.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Qualcomm Display DPU on SM6115

maintainers:
  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

$ref: /schemas/display/msm/dpu-common.yaml#

properties:
  compatible:
    const: qcom,sm6115-dpu

  reg:
    items:
      - description: MDP register set
      - description: VBIF register set

  reg-names:
    items:
      - const: mdp
      - const: vbif

  clocks:
    items:
      - description: Display AXI
      - description: Display AHB
      - description: Display core
      - description: Display lut
      - description: Display rotator
      - description: Display vsync

  clock-names:
    items:
      - const: bus
      - const: iface
      - const: core
      - const: lut
      - const: rot
      - const: vsync

required:
  - compatible
  - reg
  - reg-names
  - clocks
  - clock-names

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/clock/qcom,sm6115-dispcc.h>
    #include <dt-bindings/clock/qcom,gcc-sm6115.h>
    #include <dt-bindings/power/qcom-rpmpd.h>

    display-controller@5e01000 {
        compatible = "qcom,sm6115-dpu";
        reg = <0x05e01000 0x8f000>,
              <0x05eb0000 0x2008>;
        reg-names = "mdp", "vbif";

        clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
                 <&dispcc DISP_CC_MDSS_AHB_CLK>,
                 <&dispcc DISP_CC_MDSS_MDP_CLK>,
                 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
                 <&dispcc DISP_CC_MDSS_ROT_CLK>,
                 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
        clock-names = "bus", "iface", "core", "lut", "rot", "vsync";

        operating-points-v2 = <&mdp_opp_table>;
        power-domains = <&rpmpd SM6115_VDDCX>;

        interrupt-parent = <&mdss>;
        interrupts = <0>;

        ports {
            #address-cells = <1>;
            #size-cells = <0>;

            port@0 {
                reg = <0>;
                endpoint {
                    remote-endpoint = <&dsi0_in>;
                };
            };
        };
    };
...