xref: /kernel/linux/linux-6.6/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/bridge/samsung,mipi-dsim.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Samsung MIPI DSIM bridge controller

maintainers:
  - Inki Dae <inki.dae@samsung.com>
  - Jagan Teki <jagan@amarulasolutions.com>
  - Marek Szyprowski <m.szyprowski@samsung.com>

description: |
  Samsung MIPI DSIM bridge controller can be found it on Exynos
  and i.MX8M Mini/Nano/Plus SoC's.

properties:
  compatible:
    oneOf:
      - enum:
          - samsung,exynos3250-mipi-dsi
          - samsung,exynos4210-mipi-dsi
          - samsung,exynos5410-mipi-dsi
          - samsung,exynos5422-mipi-dsi
          - samsung,exynos5433-mipi-dsi
          - fsl,imx8mm-mipi-dsim
          - fsl,imx8mp-mipi-dsim
      - items:
          - const: fsl,imx8mn-mipi-dsim
          - const: fsl,imx8mm-mipi-dsim

  reg:
    maxItems: 1

  interrupts:
    maxItems: 1

  '#address-cells':
    const: 1

  '#size-cells':
    const: 0

  clocks:
    minItems: 2
    maxItems: 5

  clock-names:
    minItems: 2
    maxItems: 5

  samsung,phy-type:
    $ref: /schemas/types.yaml#/definitions/uint32
    description: phandle to the samsung phy-type

  power-domains:
    maxItems: 1

  samsung,power-domain:
    $ref: /schemas/types.yaml#/definitions/phandle
    description: phandle to the associated samsung power domain

  vddcore-supply:
    description: MIPI DSIM Core voltage supply (e.g. 1.1V)

  vddio-supply:
    description: MIPI DSIM I/O and PLL voltage supply (e.g. 1.8V)

  samsung,burst-clock-frequency:
    $ref: /schemas/types.yaml#/definitions/uint32
    description:
      DSIM high speed burst mode frequency.  If absent,
      the pixel clock from the attached device or bridge
      will be used instead.

  samsung,esc-clock-frequency:
    $ref: /schemas/types.yaml#/definitions/uint32
    description:
      DSIM escape mode frequency.

  samsung,pll-clock-frequency:
    $ref: /schemas/types.yaml#/definitions/uint32
    description:
      DSIM oscillator clock frequency. If absent, the clock frequency
      of sclk_mipi will be used instead.

  phys:
    maxItems: 1

  phy-names:
    const: dsim

  ports:
    $ref: /schemas/graph.yaml#/properties/ports

    properties:
      port@0:
        $ref: /schemas/graph.yaml#/properties/port
        description:
          Input port node to receive pixel data from the
          display controller. Exactly one endpoint must be
          specified.

      port@1:
        $ref: /schemas/graph.yaml#/$defs/port-base
        unevaluatedProperties: false
        description:
          DSI output port node to the panel or the next bridge
          in the chain.

        properties:
          endpoint:
            $ref: /schemas/media/video-interfaces.yaml#
            unevaluatedProperties: false

            properties:
              data-lanes:
                minItems: 1
                maxItems: 4
                uniqueItems: true
                items:
                  enum: [ 1, 2, 3, 4 ]

              lane-polarities:
                minItems: 1
                maxItems: 5
                description:
                  The Samsung MIPI DSI IP requires that all the data lanes have
                  the same polarity.

            dependencies:
              lane-polarities: [data-lanes]

required:
  - clock-names
  - clocks
  - compatible
  - interrupts
  - reg
  - samsung,esc-clock-frequency

allOf:
  - $ref: ../dsi-controller.yaml#
  - if:
      properties:
        compatible:
          contains:
            const: samsung,exynos5433-mipi-dsi

    then:
      properties:
        clocks:
          minItems: 5

        clock-names:
          items:
            - const: bus_clk
            - const: phyclk_mipidphy0_bitclkdiv8
            - const: phyclk_mipidphy0_rxclkesc0
            - const: sclk_rgb_vclk_to_dsim0
            - const: sclk_mipi

        ports:
          required:
            - port@0

      required:
        - ports
        - vddcore-supply
        - vddio-supply

  - if:
      properties:
        compatible:
          contains:
            const: samsung,exynos5410-mipi-dsi

    then:
      properties:
        clocks:
          minItems: 2

        clock-names:
          items:
            - const: bus_clk
            - const: pll_clk

      required:
        - vddcore-supply
        - vddio-supply

  - if:
      properties:
        compatible:
          contains:
            const: samsung,exynos4210-mipi-dsi

    then:
      properties:
        clocks:
          minItems: 2

        clock-names:
          items:
            - const: bus_clk
            - const: sclk_mipi

      required:
        - vddcore-supply
        - vddio-supply

  - if:
      properties:
        compatible:
          contains:
            const: samsung,exynos3250-mipi-dsi

    then:
      properties:
        clocks:
          minItems: 2

        clock-names:
          items:
            - const: bus_clk
            - const: pll_clk

      required:
        - vddcore-supply
        - vddio-supply
        - samsung,phy-type

additionalProperties:
  type: object

examples:
  - |
    #include <dt-bindings/clock/exynos5433.h>
    #include <dt-bindings/gpio/gpio.h>
    #include <dt-bindings/interrupt-controller/arm-gic.h>

    dsi@13900000 {
       compatible = "samsung,exynos5433-mipi-dsi";
       reg = <0x13900000 0xC0>;
       interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
       phys = <&mipi_phy 1>;
       phy-names = "dsim";
       clocks = <&cmu_disp CLK_PCLK_DSIM0>,
                <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8>,
                <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0>,
                <&cmu_disp CLK_SCLK_RGB_VCLK_TO_DSIM0>,
                <&cmu_disp CLK_SCLK_DSIM0>;
       clock-names = "bus_clk",
                     "phyclk_mipidphy0_bitclkdiv8",
                     "phyclk_mipidphy0_rxclkesc0",
                     "sclk_rgb_vclk_to_dsim0",
                     "sclk_mipi";
       power-domains = <&pd_disp>;
       vddcore-supply = <&ldo6_reg>;
       vddio-supply = <&ldo7_reg>;
       samsung,burst-clock-frequency = <512000000>;
       samsung,esc-clock-frequency = <16000000>;
       samsung,pll-clock-frequency = <24000000>;
       pinctrl-names = "default";
       pinctrl-0 = <&te_irq>;

       ports {
          #address-cells = <1>;
          #size-cells = <0>;

          port@0 {
             reg = <0>;

             dsi_to_mic: endpoint {
                remote-endpoint = <&mic_to_dsi>;
             };
          };
       };
    };