1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Texas Instruments TLV320AIC26 low power audio CODEC
4 * ALSA SoC CODEC driver
5 *
6 * Copyright (C) 2008 Secret Lab Technologies Ltd.
7 */
8
9#include <linux/module.h>
10#include <linux/moduleparam.h>
11#include <linux/init.h>
12#include <linux/delay.h>
13#include <linux/pm.h>
14#include <linux/device.h>
15#include <linux/sysfs.h>
16#include <linux/spi/spi.h>
17#include <linux/slab.h>
18#include <sound/core.h>
19#include <sound/pcm.h>
20#include <sound/pcm_params.h>
21#include <sound/soc.h>
22#include <sound/initval.h>
23
24#include "tlv320aic26.h"
25
26MODULE_DESCRIPTION("ASoC TLV320AIC26 codec driver");
27MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
28MODULE_LICENSE("GPL");
29
30/* AIC26 driver private data */
31struct aic26 {
32	struct spi_device *spi;
33	struct regmap *regmap;
34	struct snd_soc_component *component;
35	int master;
36	int datfm;
37	int mclk;
38
39	/* Keyclick parameters */
40	int keyclick_amplitude;
41	int keyclick_freq;
42	int keyclick_len;
43};
44
45static const struct snd_soc_dapm_widget tlv320aic26_dapm_widgets[] = {
46SND_SOC_DAPM_INPUT("MICIN"),
47SND_SOC_DAPM_INPUT("AUX"),
48
49SND_SOC_DAPM_OUTPUT("HPL"),
50SND_SOC_DAPM_OUTPUT("HPR"),
51};
52
53static const struct snd_soc_dapm_route tlv320aic26_dapm_routes[] = {
54	{ "Capture", NULL, "MICIN" },
55	{ "Capture", NULL, "AUX" },
56
57	{ "HPL", NULL, "Playback" },
58	{ "HPR", NULL, "Playback" },
59};
60
61/* ---------------------------------------------------------------------
62 * Digital Audio Interface Operations
63 */
64static int aic26_hw_params(struct snd_pcm_substream *substream,
65			   struct snd_pcm_hw_params *params,
66			   struct snd_soc_dai *dai)
67{
68	struct snd_soc_component *component = dai->component;
69	struct aic26 *aic26 = snd_soc_component_get_drvdata(component);
70	int fsref, divisor, wlen, pval, jval, dval, qval;
71	u16 reg;
72
73	dev_dbg(&aic26->spi->dev, "aic26_hw_params(substream=%p, params=%p)\n",
74		substream, params);
75	dev_dbg(&aic26->spi->dev, "rate=%i width=%d\n", params_rate(params),
76		params_width(params));
77
78	switch (params_rate(params)) {
79	case 8000:  fsref = 48000; divisor = AIC26_DIV_6; break;
80	case 11025: fsref = 44100; divisor = AIC26_DIV_4; break;
81	case 12000: fsref = 48000; divisor = AIC26_DIV_4; break;
82	case 16000: fsref = 48000; divisor = AIC26_DIV_3; break;
83	case 22050: fsref = 44100; divisor = AIC26_DIV_2; break;
84	case 24000: fsref = 48000; divisor = AIC26_DIV_2; break;
85	case 32000: fsref = 48000; divisor = AIC26_DIV_1_5; break;
86	case 44100: fsref = 44100; divisor = AIC26_DIV_1; break;
87	case 48000: fsref = 48000; divisor = AIC26_DIV_1; break;
88	default:
89		dev_dbg(&aic26->spi->dev, "bad rate\n"); return -EINVAL;
90	}
91
92	/* select data word length */
93	switch (params_width(params)) {
94	case 8:  wlen = AIC26_WLEN_16; break;
95	case 16: wlen = AIC26_WLEN_16; break;
96	case 24: wlen = AIC26_WLEN_24; break;
97	case 32: wlen = AIC26_WLEN_32; break;
98	default:
99		dev_dbg(&aic26->spi->dev, "bad format\n"); return -EINVAL;
100	}
101
102	/**
103	 * Configure PLL
104	 * fsref = (mclk * PLLM) / 2048
105	 * where PLLM = J.DDDD (DDDD register ranges from 0 to 9999, decimal)
106	 */
107	pval = 1;
108	/* compute J portion of multiplier */
109	jval = fsref / (aic26->mclk / 2048);
110	/* compute fractional DDDD component of multiplier */
111	dval = fsref - (jval * (aic26->mclk / 2048));
112	dval = (10000 * dval) / (aic26->mclk / 2048);
113	dev_dbg(&aic26->spi->dev, "Setting PLLM to %d.%04d\n", jval, dval);
114	qval = 0;
115	reg = 0x8000 | qval << 11 | pval << 8 | jval << 2;
116	snd_soc_component_write(component, AIC26_REG_PLL_PROG1, reg);
117	reg = dval << 2;
118	snd_soc_component_write(component, AIC26_REG_PLL_PROG2, reg);
119
120	/* Audio Control 3 (master mode, fsref rate) */
121	if (aic26->master)
122		reg = 0x0800;
123	if (fsref == 48000)
124		reg = 0x2000;
125	snd_soc_component_update_bits(component, AIC26_REG_AUDIO_CTRL3, 0xf800, reg);
126
127	/* Audio Control 1 (FSref divisor) */
128	reg = wlen | aic26->datfm | (divisor << 3) | divisor;
129	snd_soc_component_update_bits(component, AIC26_REG_AUDIO_CTRL1, 0xfff, reg);
130
131	return 0;
132}
133
134/*
135 * aic26_mute - Mute control to reduce noise when changing audio format
136 */
137static int aic26_mute(struct snd_soc_dai *dai, int mute, int direction)
138{
139	struct snd_soc_component *component = dai->component;
140	struct aic26 *aic26 = snd_soc_component_get_drvdata(component);
141	u16 reg;
142
143	dev_dbg(&aic26->spi->dev, "aic26_mute(dai=%p, mute=%i)\n",
144		dai, mute);
145
146	if (mute)
147		reg = 0x8080;
148	else
149		reg = 0;
150	snd_soc_component_update_bits(component, AIC26_REG_DAC_GAIN, 0x8000, reg);
151
152	return 0;
153}
154
155static int aic26_set_sysclk(struct snd_soc_dai *codec_dai,
156			    int clk_id, unsigned int freq, int dir)
157{
158	struct snd_soc_component *component = codec_dai->component;
159	struct aic26 *aic26 = snd_soc_component_get_drvdata(component);
160
161	dev_dbg(&aic26->spi->dev, "aic26_set_sysclk(dai=%p, clk_id==%i,"
162		" freq=%i, dir=%i)\n",
163		codec_dai, clk_id, freq, dir);
164
165	/* MCLK needs to fall between 2MHz and 50 MHz */
166	if ((freq < 2000000) || (freq > 50000000))
167		return -EINVAL;
168
169	aic26->mclk = freq;
170	return 0;
171}
172
173static int aic26_set_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
174{
175	struct snd_soc_component *component = codec_dai->component;
176	struct aic26 *aic26 = snd_soc_component_get_drvdata(component);
177
178	dev_dbg(&aic26->spi->dev, "aic26_set_fmt(dai=%p, fmt==%i)\n",
179		codec_dai, fmt);
180
181	/* set master/slave audio interface */
182	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
183	case SND_SOC_DAIFMT_CBM_CFM: aic26->master = 1; break;
184	case SND_SOC_DAIFMT_CBS_CFS: aic26->master = 0; break;
185	default:
186		dev_dbg(&aic26->spi->dev, "bad master\n"); return -EINVAL;
187	}
188
189	/* interface format */
190	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
191	case SND_SOC_DAIFMT_I2S:     aic26->datfm = AIC26_DATFM_I2S; break;
192	case SND_SOC_DAIFMT_DSP_A:   aic26->datfm = AIC26_DATFM_DSP; break;
193	case SND_SOC_DAIFMT_RIGHT_J: aic26->datfm = AIC26_DATFM_RIGHTJ; break;
194	case SND_SOC_DAIFMT_LEFT_J:  aic26->datfm = AIC26_DATFM_LEFTJ; break;
195	default:
196		dev_dbg(&aic26->spi->dev, "bad format\n"); return -EINVAL;
197	}
198
199	return 0;
200}
201
202/* ---------------------------------------------------------------------
203 * Digital Audio Interface Definition
204 */
205#define AIC26_RATES	(SNDRV_PCM_RATE_8000  | SNDRV_PCM_RATE_11025 |\
206			 SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |\
207			 SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |\
208			 SNDRV_PCM_RATE_48000)
209#define AIC26_FORMATS	(SNDRV_PCM_FMTBIT_S8     | SNDRV_PCM_FMTBIT_S16_BE |\
210			 SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S32_BE)
211
212static const struct snd_soc_dai_ops aic26_dai_ops = {
213	.hw_params	= aic26_hw_params,
214	.mute_stream	= aic26_mute,
215	.set_sysclk	= aic26_set_sysclk,
216	.set_fmt	= aic26_set_fmt,
217	.no_capture_mute = 1,
218};
219
220static struct snd_soc_dai_driver aic26_dai = {
221	.name = "tlv320aic26-hifi",
222	.playback = {
223		.stream_name = "Playback",
224		.channels_min = 2,
225		.channels_max = 2,
226		.rates = AIC26_RATES,
227		.formats = AIC26_FORMATS,
228	},
229	.capture = {
230		.stream_name = "Capture",
231		.channels_min = 2,
232		.channels_max = 2,
233		.rates = AIC26_RATES,
234		.formats = AIC26_FORMATS,
235	},
236	.ops = &aic26_dai_ops,
237};
238
239/* ---------------------------------------------------------------------
240 * ALSA controls
241 */
242static const char *aic26_capture_src_text[] = {"Mic", "Aux"};
243static SOC_ENUM_SINGLE_DECL(aic26_capture_src_enum,
244			    AIC26_REG_AUDIO_CTRL1, 12,
245			    aic26_capture_src_text);
246
247static const struct snd_kcontrol_new aic26_snd_controls[] = {
248	/* Output */
249	SOC_DOUBLE("PCM Playback Volume", AIC26_REG_DAC_GAIN, 8, 0, 0x7f, 1),
250	SOC_DOUBLE("PCM Playback Switch", AIC26_REG_DAC_GAIN, 15, 7, 1, 1),
251	SOC_SINGLE("PCM Capture Volume", AIC26_REG_ADC_GAIN, 8, 0x7f, 0),
252	SOC_SINGLE("PCM Capture Mute", AIC26_REG_ADC_GAIN, 15, 1, 1),
253	SOC_SINGLE("Keyclick activate", AIC26_REG_AUDIO_CTRL2, 15, 0x1, 0),
254	SOC_SINGLE("Keyclick amplitude", AIC26_REG_AUDIO_CTRL2, 12, 0x7, 0),
255	SOC_SINGLE("Keyclick frequency", AIC26_REG_AUDIO_CTRL2, 8, 0x7, 0),
256	SOC_SINGLE("Keyclick period", AIC26_REG_AUDIO_CTRL2, 4, 0xf, 0),
257	SOC_ENUM("Capture Source", aic26_capture_src_enum),
258};
259
260/* ---------------------------------------------------------------------
261 * SPI device portion of driver: sysfs files for debugging
262 */
263
264static ssize_t aic26_keyclick_show(struct device *dev,
265				   struct device_attribute *attr, char *buf)
266{
267	struct aic26 *aic26 = dev_get_drvdata(dev);
268	int val, amp, freq, len;
269
270	val = snd_soc_component_read(aic26->component, AIC26_REG_AUDIO_CTRL2);
271	amp = (val >> 12) & 0x7;
272	freq = (125 << ((val >> 8) & 0x7)) >> 1;
273	len = 2 * (1 + ((val >> 4) & 0xf));
274
275	return sprintf(buf, "amp=%x freq=%iHz len=%iclks\n", amp, freq, len);
276}
277
278/* Any write to the keyclick attribute will trigger the keyclick event */
279static ssize_t aic26_keyclick_set(struct device *dev,
280				  struct device_attribute *attr,
281				  const char *buf, size_t count)
282{
283	struct aic26 *aic26 = dev_get_drvdata(dev);
284
285	snd_soc_component_update_bits(aic26->component, AIC26_REG_AUDIO_CTRL2,
286			    0x8000, 0x800);
287
288	return count;
289}
290
291static DEVICE_ATTR(keyclick, 0644, aic26_keyclick_show, aic26_keyclick_set);
292
293/* ---------------------------------------------------------------------
294 * SoC CODEC portion of driver: probe and release routines
295 */
296static int aic26_probe(struct snd_soc_component *component)
297{
298	struct aic26 *aic26 = dev_get_drvdata(component->dev);
299	int ret, reg;
300
301	aic26->component = component;
302
303	/* Reset the codec to power on defaults */
304	snd_soc_component_write(component, AIC26_REG_RESET, 0xBB00);
305
306	/* Power up CODEC */
307	snd_soc_component_write(component, AIC26_REG_POWER_CTRL, 0);
308
309	/* Audio Control 3 (master mode, fsref rate) */
310	reg = snd_soc_component_read(component, AIC26_REG_AUDIO_CTRL3);
311	reg &= ~0xf800;
312	reg |= 0x0800; /* set master mode */
313	snd_soc_component_write(component, AIC26_REG_AUDIO_CTRL3, reg);
314
315	/* Register the sysfs files for debugging */
316	/* Create SysFS files */
317	ret = device_create_file(component->dev, &dev_attr_keyclick);
318	if (ret)
319		dev_info(component->dev, "error creating sysfs files\n");
320
321	return 0;
322}
323
324static const struct snd_soc_component_driver aic26_soc_component_dev = {
325	.probe			= aic26_probe,
326	.controls		= aic26_snd_controls,
327	.num_controls		= ARRAY_SIZE(aic26_snd_controls),
328	.dapm_widgets		= tlv320aic26_dapm_widgets,
329	.num_dapm_widgets	= ARRAY_SIZE(tlv320aic26_dapm_widgets),
330	.dapm_routes		= tlv320aic26_dapm_routes,
331	.num_dapm_routes	= ARRAY_SIZE(tlv320aic26_dapm_routes),
332	.idle_bias_on		= 1,
333	.use_pmdown_time	= 1,
334	.endianness		= 1,
335	.non_legacy_dai_naming	= 1,
336};
337
338static const struct regmap_config aic26_regmap = {
339	.reg_bits = 16,
340	.val_bits = 16,
341};
342
343/* ---------------------------------------------------------------------
344 * SPI device portion of driver: probe and release routines and SPI
345 * 				 driver registration.
346 */
347static int aic26_spi_probe(struct spi_device *spi)
348{
349	struct aic26 *aic26;
350	int ret;
351
352	dev_dbg(&spi->dev, "probing tlv320aic26 spi device\n");
353
354	/* Allocate driver data */
355	aic26 = devm_kzalloc(&spi->dev, sizeof *aic26, GFP_KERNEL);
356	if (!aic26)
357		return -ENOMEM;
358
359	aic26->regmap = devm_regmap_init_spi(spi, &aic26_regmap);
360	if (IS_ERR(aic26->regmap))
361		return PTR_ERR(aic26->regmap);
362
363	/* Initialize the driver data */
364	aic26->spi = spi;
365	dev_set_drvdata(&spi->dev, aic26);
366	aic26->master = 1;
367
368	ret = devm_snd_soc_register_component(&spi->dev,
369			&aic26_soc_component_dev, &aic26_dai, 1);
370	return ret;
371}
372
373static struct spi_driver aic26_spi = {
374	.driver = {
375		.name = "tlv320aic26-codec",
376	},
377	.probe = aic26_spi_probe,
378};
379
380module_spi_driver(aic26_spi);
381