1// SPDX-License-Identifier: GPL-2.0 2/* 3 * ALSA SoC Texas Instruments TAS6424 Quad-Channel Audio Amplifier 4 * 5 * Copyright (C) 2016-2017 Texas Instruments Incorporated - https://www.ti.com/ 6 * Author: Andreas Dannenberg <dannenberg@ti.com> 7 * Andrew F. Davis <afd@ti.com> 8 */ 9 10#include <linux/module.h> 11#include <linux/errno.h> 12#include <linux/device.h> 13#include <linux/i2c.h> 14#include <linux/pm_runtime.h> 15#include <linux/regmap.h> 16#include <linux/slab.h> 17#include <linux/regulator/consumer.h> 18#include <linux/delay.h> 19#include <linux/gpio/consumer.h> 20 21#include <sound/pcm.h> 22#include <sound/pcm_params.h> 23#include <sound/soc.h> 24#include <sound/soc-dapm.h> 25#include <sound/tlv.h> 26 27#include "tas6424.h" 28 29/* Define how often to check (and clear) the fault status register (in ms) */ 30#define TAS6424_FAULT_CHECK_INTERVAL 200 31 32static const char * const tas6424_supply_names[] = { 33 "dvdd", /* Digital power supply. Connect to 3.3-V supply. */ 34 "vbat", /* Supply used for higher voltage analog circuits. */ 35 "pvdd", /* Class-D amp output FETs supply. */ 36}; 37#define TAS6424_NUM_SUPPLIES ARRAY_SIZE(tas6424_supply_names) 38 39struct tas6424_data { 40 struct device *dev; 41 struct regmap *regmap; 42 struct regulator_bulk_data supplies[TAS6424_NUM_SUPPLIES]; 43 struct delayed_work fault_check_work; 44 unsigned int last_cfault; 45 unsigned int last_fault1; 46 unsigned int last_fault2; 47 unsigned int last_warn; 48 struct gpio_desc *standby_gpio; 49 struct gpio_desc *mute_gpio; 50}; 51 52/* 53 * DAC digital volumes. From -103.5 to 24 dB in 0.5 dB steps. Note that 54 * setting the gain below -100 dB (register value <0x7) is effectively a MUTE 55 * as per device datasheet. 56 */ 57static DECLARE_TLV_DB_SCALE(dac_tlv, -10350, 50, 0); 58 59static const struct snd_kcontrol_new tas6424_snd_controls[] = { 60 SOC_SINGLE_TLV("Speaker Driver CH1 Playback Volume", 61 TAS6424_CH1_VOL_CTRL, 0, 0xff, 0, dac_tlv), 62 SOC_SINGLE_TLV("Speaker Driver CH2 Playback Volume", 63 TAS6424_CH2_VOL_CTRL, 0, 0xff, 0, dac_tlv), 64 SOC_SINGLE_TLV("Speaker Driver CH3 Playback Volume", 65 TAS6424_CH3_VOL_CTRL, 0, 0xff, 0, dac_tlv), 66 SOC_SINGLE_TLV("Speaker Driver CH4 Playback Volume", 67 TAS6424_CH4_VOL_CTRL, 0, 0xff, 0, dac_tlv), 68 SOC_SINGLE_STROBE("Auto Diagnostics Switch", TAS6424_DC_DIAG_CTRL1, 69 TAS6424_LDGBYPASS_SHIFT, 1), 70}; 71 72static int tas6424_dac_event(struct snd_soc_dapm_widget *w, 73 struct snd_kcontrol *kcontrol, int event) 74{ 75 struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); 76 struct tas6424_data *tas6424 = snd_soc_component_get_drvdata(component); 77 78 dev_dbg(component->dev, "%s() event=0x%0x\n", __func__, event); 79 80 if (event & SND_SOC_DAPM_POST_PMU) { 81 /* Observe codec shutdown-to-active time */ 82 msleep(12); 83 84 /* Turn on TAS6424 periodic fault checking/handling */ 85 tas6424->last_fault1 = 0; 86 tas6424->last_fault2 = 0; 87 tas6424->last_warn = 0; 88 schedule_delayed_work(&tas6424->fault_check_work, 89 msecs_to_jiffies(TAS6424_FAULT_CHECK_INTERVAL)); 90 } else if (event & SND_SOC_DAPM_PRE_PMD) { 91 /* Disable TAS6424 periodic fault checking/handling */ 92 cancel_delayed_work_sync(&tas6424->fault_check_work); 93 } 94 95 return 0; 96} 97 98static const struct snd_soc_dapm_widget tas6424_dapm_widgets[] = { 99 SND_SOC_DAPM_AIF_IN("DAC IN", "Playback", 0, SND_SOC_NOPM, 0, 0), 100 SND_SOC_DAPM_DAC_E("DAC", NULL, SND_SOC_NOPM, 0, 0, tas6424_dac_event, 101 SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), 102 SND_SOC_DAPM_OUTPUT("OUT") 103}; 104 105static const struct snd_soc_dapm_route tas6424_audio_map[] = { 106 { "DAC", NULL, "DAC IN" }, 107 { "OUT", NULL, "DAC" }, 108}; 109 110static int tas6424_hw_params(struct snd_pcm_substream *substream, 111 struct snd_pcm_hw_params *params, 112 struct snd_soc_dai *dai) 113{ 114 struct snd_soc_component *component = dai->component; 115 unsigned int rate = params_rate(params); 116 unsigned int width = params_width(params); 117 u8 sap_ctrl = 0; 118 119 dev_dbg(component->dev, "%s() rate=%u width=%u\n", __func__, rate, width); 120 121 switch (rate) { 122 case 44100: 123 sap_ctrl |= TAS6424_SAP_RATE_44100; 124 break; 125 case 48000: 126 sap_ctrl |= TAS6424_SAP_RATE_48000; 127 break; 128 case 96000: 129 sap_ctrl |= TAS6424_SAP_RATE_96000; 130 break; 131 default: 132 dev_err(component->dev, "unsupported sample rate: %u\n", rate); 133 return -EINVAL; 134 } 135 136 switch (width) { 137 case 16: 138 sap_ctrl |= TAS6424_SAP_TDM_SLOT_SZ_16; 139 break; 140 case 24: 141 break; 142 default: 143 dev_err(component->dev, "unsupported sample width: %u\n", width); 144 return -EINVAL; 145 } 146 147 snd_soc_component_update_bits(component, TAS6424_SAP_CTRL, 148 TAS6424_SAP_RATE_MASK | 149 TAS6424_SAP_TDM_SLOT_SZ_16, 150 sap_ctrl); 151 152 return 0; 153} 154 155static int tas6424_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt) 156{ 157 struct snd_soc_component *component = dai->component; 158 u8 serial_format = 0; 159 160 dev_dbg(component->dev, "%s() fmt=0x%0x\n", __func__, fmt); 161 162 /* clock masters */ 163 switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { 164 case SND_SOC_DAIFMT_CBS_CFS: 165 break; 166 default: 167 dev_err(component->dev, "Invalid DAI master/slave interface\n"); 168 return -EINVAL; 169 } 170 171 /* signal polarity */ 172 switch (fmt & SND_SOC_DAIFMT_INV_MASK) { 173 case SND_SOC_DAIFMT_NB_NF: 174 break; 175 default: 176 dev_err(component->dev, "Invalid DAI clock signal polarity\n"); 177 return -EINVAL; 178 } 179 180 /* interface format */ 181 switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { 182 case SND_SOC_DAIFMT_I2S: 183 serial_format |= TAS6424_SAP_I2S; 184 break; 185 case SND_SOC_DAIFMT_DSP_A: 186 serial_format |= TAS6424_SAP_DSP; 187 break; 188 case SND_SOC_DAIFMT_DSP_B: 189 /* 190 * We can use the fact that the TAS6424 does not care about the 191 * LRCLK duty cycle during TDM to receive DSP_B formatted data 192 * in LEFTJ mode (no delaying of the 1st data bit). 193 */ 194 serial_format |= TAS6424_SAP_LEFTJ; 195 break; 196 case SND_SOC_DAIFMT_LEFT_J: 197 serial_format |= TAS6424_SAP_LEFTJ; 198 break; 199 default: 200 dev_err(component->dev, "Invalid DAI interface format\n"); 201 return -EINVAL; 202 } 203 204 snd_soc_component_update_bits(component, TAS6424_SAP_CTRL, 205 TAS6424_SAP_FMT_MASK, serial_format); 206 207 return 0; 208} 209 210static int tas6424_set_dai_tdm_slot(struct snd_soc_dai *dai, 211 unsigned int tx_mask, unsigned int rx_mask, 212 int slots, int slot_width) 213{ 214 struct snd_soc_component *component = dai->component; 215 unsigned int first_slot, last_slot; 216 bool sap_tdm_slot_last; 217 218 dev_dbg(component->dev, "%s() tx_mask=%d rx_mask=%d\n", __func__, 219 tx_mask, rx_mask); 220 221 if (!tx_mask || !rx_mask) 222 return 0; /* nothing needed to disable TDM mode */ 223 224 /* 225 * Determine the first slot and last slot that is being requested so 226 * we'll be able to more easily enforce certain constraints as the 227 * TAS6424's TDM interface is not fully configurable. 228 */ 229 first_slot = __ffs(tx_mask); 230 last_slot = __fls(rx_mask); 231 232 if (last_slot - first_slot != 4) { 233 dev_err(component->dev, "tdm mask must cover 4 contiguous slots\n"); 234 return -EINVAL; 235 } 236 237 switch (first_slot) { 238 case 0: 239 sap_tdm_slot_last = false; 240 break; 241 case 4: 242 sap_tdm_slot_last = true; 243 break; 244 default: 245 dev_err(component->dev, "tdm mask must start at slot 0 or 4\n"); 246 return -EINVAL; 247 } 248 249 snd_soc_component_update_bits(component, TAS6424_SAP_CTRL, TAS6424_SAP_TDM_SLOT_LAST, 250 sap_tdm_slot_last ? TAS6424_SAP_TDM_SLOT_LAST : 0); 251 252 return 0; 253} 254 255static int tas6424_mute(struct snd_soc_dai *dai, int mute, int direction) 256{ 257 struct snd_soc_component *component = dai->component; 258 struct tas6424_data *tas6424 = snd_soc_component_get_drvdata(component); 259 unsigned int val; 260 261 dev_dbg(component->dev, "%s() mute=%d\n", __func__, mute); 262 263 if (tas6424->mute_gpio) { 264 gpiod_set_value_cansleep(tas6424->mute_gpio, mute); 265 return 0; 266 } 267 268 if (mute) 269 val = TAS6424_ALL_STATE_MUTE; 270 else 271 val = TAS6424_ALL_STATE_PLAY; 272 273 snd_soc_component_write(component, TAS6424_CH_STATE_CTRL, val); 274 275 return 0; 276} 277 278static int tas6424_power_off(struct snd_soc_component *component) 279{ 280 struct tas6424_data *tas6424 = snd_soc_component_get_drvdata(component); 281 int ret; 282 283 snd_soc_component_write(component, TAS6424_CH_STATE_CTRL, TAS6424_ALL_STATE_HIZ); 284 285 regcache_cache_only(tas6424->regmap, true); 286 regcache_mark_dirty(tas6424->regmap); 287 288 ret = regulator_bulk_disable(ARRAY_SIZE(tas6424->supplies), 289 tas6424->supplies); 290 if (ret < 0) { 291 dev_err(component->dev, "failed to disable supplies: %d\n", ret); 292 return ret; 293 } 294 295 return 0; 296} 297 298static int tas6424_power_on(struct snd_soc_component *component) 299{ 300 struct tas6424_data *tas6424 = snd_soc_component_get_drvdata(component); 301 int ret; 302 u8 chan_states; 303 int no_auto_diags = 0; 304 unsigned int reg_val; 305 306 if (!regmap_read(tas6424->regmap, TAS6424_DC_DIAG_CTRL1, ®_val)) 307 no_auto_diags = reg_val & TAS6424_LDGBYPASS_MASK; 308 309 ret = regulator_bulk_enable(ARRAY_SIZE(tas6424->supplies), 310 tas6424->supplies); 311 if (ret < 0) { 312 dev_err(component->dev, "failed to enable supplies: %d\n", ret); 313 return ret; 314 } 315 316 regcache_cache_only(tas6424->regmap, false); 317 318 ret = regcache_sync(tas6424->regmap); 319 if (ret < 0) { 320 dev_err(component->dev, "failed to sync regcache: %d\n", ret); 321 return ret; 322 } 323 324 if (tas6424->mute_gpio) { 325 gpiod_set_value_cansleep(tas6424->mute_gpio, 0); 326 /* 327 * channels are muted via the mute pin. Don't also mute 328 * them via the registers so that subsequent register 329 * access is not necessary to un-mute the channels 330 */ 331 chan_states = TAS6424_ALL_STATE_PLAY; 332 } else { 333 chan_states = TAS6424_ALL_STATE_MUTE; 334 } 335 snd_soc_component_write(component, TAS6424_CH_STATE_CTRL, chan_states); 336 337 /* any time we come out of HIZ, the output channels automatically run DC 338 * load diagnostics if autodiagnotics are enabled. wait here until this 339 * completes. 340 */ 341 if (!no_auto_diags) 342 msleep(230); 343 344 return 0; 345} 346 347static int tas6424_set_bias_level(struct snd_soc_component *component, 348 enum snd_soc_bias_level level) 349{ 350 dev_dbg(component->dev, "%s() level=%d\n", __func__, level); 351 352 switch (level) { 353 case SND_SOC_BIAS_ON: 354 case SND_SOC_BIAS_PREPARE: 355 break; 356 case SND_SOC_BIAS_STANDBY: 357 if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) 358 tas6424_power_on(component); 359 break; 360 case SND_SOC_BIAS_OFF: 361 tas6424_power_off(component); 362 break; 363 } 364 365 return 0; 366} 367 368static struct snd_soc_component_driver soc_codec_dev_tas6424 = { 369 .set_bias_level = tas6424_set_bias_level, 370 .controls = tas6424_snd_controls, 371 .num_controls = ARRAY_SIZE(tas6424_snd_controls), 372 .dapm_widgets = tas6424_dapm_widgets, 373 .num_dapm_widgets = ARRAY_SIZE(tas6424_dapm_widgets), 374 .dapm_routes = tas6424_audio_map, 375 .num_dapm_routes = ARRAY_SIZE(tas6424_audio_map), 376 .use_pmdown_time = 1, 377 .endianness = 1, 378 .non_legacy_dai_naming = 1, 379}; 380 381static const struct snd_soc_dai_ops tas6424_speaker_dai_ops = { 382 .hw_params = tas6424_hw_params, 383 .set_fmt = tas6424_set_dai_fmt, 384 .set_tdm_slot = tas6424_set_dai_tdm_slot, 385 .mute_stream = tas6424_mute, 386 .no_capture_mute = 1, 387}; 388 389static struct snd_soc_dai_driver tas6424_dai[] = { 390 { 391 .name = "tas6424-amplifier", 392 .playback = { 393 .stream_name = "Playback", 394 .channels_min = 1, 395 .channels_max = 4, 396 .rates = TAS6424_RATES, 397 .formats = TAS6424_FORMATS, 398 }, 399 .ops = &tas6424_speaker_dai_ops, 400 }, 401}; 402 403static void tas6424_fault_check_work(struct work_struct *work) 404{ 405 struct tas6424_data *tas6424 = container_of(work, struct tas6424_data, 406 fault_check_work.work); 407 struct device *dev = tas6424->dev; 408 unsigned int reg; 409 int ret; 410 411 ret = regmap_read(tas6424->regmap, TAS6424_CHANNEL_FAULT, ®); 412 if (ret < 0) { 413 dev_err(dev, "failed to read CHANNEL_FAULT register: %d\n", ret); 414 goto out; 415 } 416 417 if (!reg) { 418 tas6424->last_cfault = reg; 419 goto check_global_fault1_reg; 420 } 421 422 /* 423 * Only flag errors once for a given occurrence. This is needed as 424 * the TAS6424 will take time clearing the fault condition internally 425 * during which we don't want to bombard the system with the same 426 * error message over and over. 427 */ 428 if ((reg & TAS6424_FAULT_OC_CH1) && !(tas6424->last_cfault & TAS6424_FAULT_OC_CH1)) 429 dev_crit(dev, "experienced a channel 1 overcurrent fault\n"); 430 431 if ((reg & TAS6424_FAULT_OC_CH2) && !(tas6424->last_cfault & TAS6424_FAULT_OC_CH2)) 432 dev_crit(dev, "experienced a channel 2 overcurrent fault\n"); 433 434 if ((reg & TAS6424_FAULT_OC_CH3) && !(tas6424->last_cfault & TAS6424_FAULT_OC_CH3)) 435 dev_crit(dev, "experienced a channel 3 overcurrent fault\n"); 436 437 if ((reg & TAS6424_FAULT_OC_CH4) && !(tas6424->last_cfault & TAS6424_FAULT_OC_CH4)) 438 dev_crit(dev, "experienced a channel 4 overcurrent fault\n"); 439 440 if ((reg & TAS6424_FAULT_DC_CH1) && !(tas6424->last_cfault & TAS6424_FAULT_DC_CH1)) 441 dev_crit(dev, "experienced a channel 1 DC fault\n"); 442 443 if ((reg & TAS6424_FAULT_DC_CH2) && !(tas6424->last_cfault & TAS6424_FAULT_DC_CH2)) 444 dev_crit(dev, "experienced a channel 2 DC fault\n"); 445 446 if ((reg & TAS6424_FAULT_DC_CH3) && !(tas6424->last_cfault & TAS6424_FAULT_DC_CH3)) 447 dev_crit(dev, "experienced a channel 3 DC fault\n"); 448 449 if ((reg & TAS6424_FAULT_DC_CH4) && !(tas6424->last_cfault & TAS6424_FAULT_DC_CH4)) 450 dev_crit(dev, "experienced a channel 4 DC fault\n"); 451 452 /* Store current fault1 value so we can detect any changes next time */ 453 tas6424->last_cfault = reg; 454 455check_global_fault1_reg: 456 ret = regmap_read(tas6424->regmap, TAS6424_GLOB_FAULT1, ®); 457 if (ret < 0) { 458 dev_err(dev, "failed to read GLOB_FAULT1 register: %d\n", ret); 459 goto out; 460 } 461 462 /* 463 * Ignore any clock faults as there is no clean way to check for them. 464 * We would need to start checking for those faults *after* the SAIF 465 * stream has been setup, and stop checking *before* the stream is 466 * stopped to avoid any false-positives. However there are no 467 * appropriate hooks to monitor these events. 468 */ 469 reg &= TAS6424_FAULT_PVDD_OV | 470 TAS6424_FAULT_VBAT_OV | 471 TAS6424_FAULT_PVDD_UV | 472 TAS6424_FAULT_VBAT_UV; 473 474 if (!reg) { 475 tas6424->last_fault1 = reg; 476 goto check_global_fault2_reg; 477 } 478 479 if ((reg & TAS6424_FAULT_PVDD_OV) && !(tas6424->last_fault1 & TAS6424_FAULT_PVDD_OV)) 480 dev_crit(dev, "experienced a PVDD overvoltage fault\n"); 481 482 if ((reg & TAS6424_FAULT_VBAT_OV) && !(tas6424->last_fault1 & TAS6424_FAULT_VBAT_OV)) 483 dev_crit(dev, "experienced a VBAT overvoltage fault\n"); 484 485 if ((reg & TAS6424_FAULT_PVDD_UV) && !(tas6424->last_fault1 & TAS6424_FAULT_PVDD_UV)) 486 dev_crit(dev, "experienced a PVDD undervoltage fault\n"); 487 488 if ((reg & TAS6424_FAULT_VBAT_UV) && !(tas6424->last_fault1 & TAS6424_FAULT_VBAT_UV)) 489 dev_crit(dev, "experienced a VBAT undervoltage fault\n"); 490 491 /* Store current fault1 value so we can detect any changes next time */ 492 tas6424->last_fault1 = reg; 493 494check_global_fault2_reg: 495 ret = regmap_read(tas6424->regmap, TAS6424_GLOB_FAULT2, ®); 496 if (ret < 0) { 497 dev_err(dev, "failed to read GLOB_FAULT2 register: %d\n", ret); 498 goto out; 499 } 500 501 reg &= TAS6424_FAULT_OTSD | 502 TAS6424_FAULT_OTSD_CH1 | 503 TAS6424_FAULT_OTSD_CH2 | 504 TAS6424_FAULT_OTSD_CH3 | 505 TAS6424_FAULT_OTSD_CH4; 506 507 if (!reg) { 508 tas6424->last_fault2 = reg; 509 goto check_warn_reg; 510 } 511 512 if ((reg & TAS6424_FAULT_OTSD) && !(tas6424->last_fault2 & TAS6424_FAULT_OTSD)) 513 dev_crit(dev, "experienced a global overtemp shutdown\n"); 514 515 if ((reg & TAS6424_FAULT_OTSD_CH1) && !(tas6424->last_fault2 & TAS6424_FAULT_OTSD_CH1)) 516 dev_crit(dev, "experienced an overtemp shutdown on CH1\n"); 517 518 if ((reg & TAS6424_FAULT_OTSD_CH2) && !(tas6424->last_fault2 & TAS6424_FAULT_OTSD_CH2)) 519 dev_crit(dev, "experienced an overtemp shutdown on CH2\n"); 520 521 if ((reg & TAS6424_FAULT_OTSD_CH3) && !(tas6424->last_fault2 & TAS6424_FAULT_OTSD_CH3)) 522 dev_crit(dev, "experienced an overtemp shutdown on CH3\n"); 523 524 if ((reg & TAS6424_FAULT_OTSD_CH4) && !(tas6424->last_fault2 & TAS6424_FAULT_OTSD_CH4)) 525 dev_crit(dev, "experienced an overtemp shutdown on CH4\n"); 526 527 /* Store current fault2 value so we can detect any changes next time */ 528 tas6424->last_fault2 = reg; 529 530check_warn_reg: 531 ret = regmap_read(tas6424->regmap, TAS6424_WARN, ®); 532 if (ret < 0) { 533 dev_err(dev, "failed to read WARN register: %d\n", ret); 534 goto out; 535 } 536 537 reg &= TAS6424_WARN_VDD_UV | 538 TAS6424_WARN_VDD_POR | 539 TAS6424_WARN_VDD_OTW | 540 TAS6424_WARN_VDD_OTW_CH1 | 541 TAS6424_WARN_VDD_OTW_CH2 | 542 TAS6424_WARN_VDD_OTW_CH3 | 543 TAS6424_WARN_VDD_OTW_CH4; 544 545 if (!reg) { 546 tas6424->last_warn = reg; 547 goto out; 548 } 549 550 if ((reg & TAS6424_WARN_VDD_UV) && !(tas6424->last_warn & TAS6424_WARN_VDD_UV)) 551 dev_warn(dev, "experienced a VDD under voltage condition\n"); 552 553 if ((reg & TAS6424_WARN_VDD_POR) && !(tas6424->last_warn & TAS6424_WARN_VDD_POR)) 554 dev_warn(dev, "experienced a VDD POR condition\n"); 555 556 if ((reg & TAS6424_WARN_VDD_OTW) && !(tas6424->last_warn & TAS6424_WARN_VDD_OTW)) 557 dev_warn(dev, "experienced a global overtemp warning\n"); 558 559 if ((reg & TAS6424_WARN_VDD_OTW_CH1) && !(tas6424->last_warn & TAS6424_WARN_VDD_OTW_CH1)) 560 dev_warn(dev, "experienced an overtemp warning on CH1\n"); 561 562 if ((reg & TAS6424_WARN_VDD_OTW_CH2) && !(tas6424->last_warn & TAS6424_WARN_VDD_OTW_CH2)) 563 dev_warn(dev, "experienced an overtemp warning on CH2\n"); 564 565 if ((reg & TAS6424_WARN_VDD_OTW_CH3) && !(tas6424->last_warn & TAS6424_WARN_VDD_OTW_CH3)) 566 dev_warn(dev, "experienced an overtemp warning on CH3\n"); 567 568 if ((reg & TAS6424_WARN_VDD_OTW_CH4) && !(tas6424->last_warn & TAS6424_WARN_VDD_OTW_CH4)) 569 dev_warn(dev, "experienced an overtemp warning on CH4\n"); 570 571 /* Store current warn value so we can detect any changes next time */ 572 tas6424->last_warn = reg; 573 574 /* Clear any warnings by toggling the CLEAR_FAULT control bit */ 575 ret = regmap_write_bits(tas6424->regmap, TAS6424_MISC_CTRL3, 576 TAS6424_CLEAR_FAULT, TAS6424_CLEAR_FAULT); 577 if (ret < 0) 578 dev_err(dev, "failed to write MISC_CTRL3 register: %d\n", ret); 579 580 ret = regmap_write_bits(tas6424->regmap, TAS6424_MISC_CTRL3, 581 TAS6424_CLEAR_FAULT, 0); 582 if (ret < 0) 583 dev_err(dev, "failed to write MISC_CTRL3 register: %d\n", ret); 584 585out: 586 /* Schedule the next fault check at the specified interval */ 587 schedule_delayed_work(&tas6424->fault_check_work, 588 msecs_to_jiffies(TAS6424_FAULT_CHECK_INTERVAL)); 589} 590 591static const struct reg_default tas6424_reg_defaults[] = { 592 { TAS6424_MODE_CTRL, 0x00 }, 593 { TAS6424_MISC_CTRL1, 0x32 }, 594 { TAS6424_MISC_CTRL2, 0x62 }, 595 { TAS6424_SAP_CTRL, 0x04 }, 596 { TAS6424_CH_STATE_CTRL, 0x55 }, 597 { TAS6424_CH1_VOL_CTRL, 0xcf }, 598 { TAS6424_CH2_VOL_CTRL, 0xcf }, 599 { TAS6424_CH3_VOL_CTRL, 0xcf }, 600 { TAS6424_CH4_VOL_CTRL, 0xcf }, 601 { TAS6424_DC_DIAG_CTRL1, 0x00 }, 602 { TAS6424_DC_DIAG_CTRL2, 0x11 }, 603 { TAS6424_DC_DIAG_CTRL3, 0x11 }, 604 { TAS6424_PIN_CTRL, 0xff }, 605 { TAS6424_AC_DIAG_CTRL1, 0x00 }, 606 { TAS6424_MISC_CTRL3, 0x00 }, 607 { TAS6424_CLIP_CTRL, 0x01 }, 608 { TAS6424_CLIP_WINDOW, 0x14 }, 609 { TAS6424_CLIP_WARN, 0x00 }, 610 { TAS6424_CBC_STAT, 0x00 }, 611 { TAS6424_MISC_CTRL4, 0x40 }, 612}; 613 614static bool tas6424_is_writable_reg(struct device *dev, unsigned int reg) 615{ 616 switch (reg) { 617 case TAS6424_MODE_CTRL: 618 case TAS6424_MISC_CTRL1: 619 case TAS6424_MISC_CTRL2: 620 case TAS6424_SAP_CTRL: 621 case TAS6424_CH_STATE_CTRL: 622 case TAS6424_CH1_VOL_CTRL: 623 case TAS6424_CH2_VOL_CTRL: 624 case TAS6424_CH3_VOL_CTRL: 625 case TAS6424_CH4_VOL_CTRL: 626 case TAS6424_DC_DIAG_CTRL1: 627 case TAS6424_DC_DIAG_CTRL2: 628 case TAS6424_DC_DIAG_CTRL3: 629 case TAS6424_PIN_CTRL: 630 case TAS6424_AC_DIAG_CTRL1: 631 case TAS6424_MISC_CTRL3: 632 case TAS6424_CLIP_CTRL: 633 case TAS6424_CLIP_WINDOW: 634 case TAS6424_CLIP_WARN: 635 case TAS6424_CBC_STAT: 636 case TAS6424_MISC_CTRL4: 637 return true; 638 default: 639 return false; 640 } 641} 642 643static bool tas6424_is_volatile_reg(struct device *dev, unsigned int reg) 644{ 645 switch (reg) { 646 case TAS6424_DC_LOAD_DIAG_REP12: 647 case TAS6424_DC_LOAD_DIAG_REP34: 648 case TAS6424_DC_LOAD_DIAG_REPLO: 649 case TAS6424_CHANNEL_STATE: 650 case TAS6424_CHANNEL_FAULT: 651 case TAS6424_GLOB_FAULT1: 652 case TAS6424_GLOB_FAULT2: 653 case TAS6424_WARN: 654 case TAS6424_AC_LOAD_DIAG_REP1: 655 case TAS6424_AC_LOAD_DIAG_REP2: 656 case TAS6424_AC_LOAD_DIAG_REP3: 657 case TAS6424_AC_LOAD_DIAG_REP4: 658 return true; 659 default: 660 return false; 661 } 662} 663 664static const struct regmap_config tas6424_regmap_config = { 665 .reg_bits = 8, 666 .val_bits = 8, 667 668 .writeable_reg = tas6424_is_writable_reg, 669 .volatile_reg = tas6424_is_volatile_reg, 670 671 .max_register = TAS6424_MAX, 672 .reg_defaults = tas6424_reg_defaults, 673 .num_reg_defaults = ARRAY_SIZE(tas6424_reg_defaults), 674 .cache_type = REGCACHE_RBTREE, 675}; 676 677#if IS_ENABLED(CONFIG_OF) 678static const struct of_device_id tas6424_of_ids[] = { 679 { .compatible = "ti,tas6424", }, 680 { }, 681}; 682MODULE_DEVICE_TABLE(of, tas6424_of_ids); 683#endif 684 685static int tas6424_i2c_probe(struct i2c_client *client, 686 const struct i2c_device_id *id) 687{ 688 struct device *dev = &client->dev; 689 struct tas6424_data *tas6424; 690 int ret; 691 int i; 692 693 tas6424 = devm_kzalloc(dev, sizeof(*tas6424), GFP_KERNEL); 694 if (!tas6424) 695 return -ENOMEM; 696 dev_set_drvdata(dev, tas6424); 697 698 tas6424->dev = dev; 699 700 tas6424->regmap = devm_regmap_init_i2c(client, &tas6424_regmap_config); 701 if (IS_ERR(tas6424->regmap)) { 702 ret = PTR_ERR(tas6424->regmap); 703 dev_err(dev, "unable to allocate register map: %d\n", ret); 704 return ret; 705 } 706 707 /* 708 * Get control of the standby pin and set it LOW to take the codec 709 * out of the stand-by mode. 710 * Note: The actual pin polarity is taken care of in the GPIO lib 711 * according the polarity specified in the DTS. 712 */ 713 tas6424->standby_gpio = devm_gpiod_get_optional(dev, "standby", 714 GPIOD_OUT_LOW); 715 if (IS_ERR(tas6424->standby_gpio)) { 716 if (PTR_ERR(tas6424->standby_gpio) == -EPROBE_DEFER) 717 return -EPROBE_DEFER; 718 dev_info(dev, "failed to get standby GPIO: %ld\n", 719 PTR_ERR(tas6424->standby_gpio)); 720 tas6424->standby_gpio = NULL; 721 } 722 723 /* 724 * Get control of the mute pin and set it HIGH in order to start with 725 * all the output muted. 726 * Note: The actual pin polarity is taken care of in the GPIO lib 727 * according the polarity specified in the DTS. 728 */ 729 tas6424->mute_gpio = devm_gpiod_get_optional(dev, "mute", 730 GPIOD_OUT_HIGH); 731 if (IS_ERR(tas6424->mute_gpio)) { 732 if (PTR_ERR(tas6424->mute_gpio) == -EPROBE_DEFER) 733 return -EPROBE_DEFER; 734 dev_info(dev, "failed to get nmute GPIO: %ld\n", 735 PTR_ERR(tas6424->mute_gpio)); 736 tas6424->mute_gpio = NULL; 737 } 738 739 for (i = 0; i < ARRAY_SIZE(tas6424->supplies); i++) 740 tas6424->supplies[i].supply = tas6424_supply_names[i]; 741 ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(tas6424->supplies), 742 tas6424->supplies); 743 if (ret) { 744 dev_err(dev, "unable to request supplies: %d\n", ret); 745 return ret; 746 } 747 748 ret = regulator_bulk_enable(ARRAY_SIZE(tas6424->supplies), 749 tas6424->supplies); 750 if (ret) { 751 dev_err(dev, "unable to enable supplies: %d\n", ret); 752 return ret; 753 } 754 755 /* Reset device to establish well-defined startup state */ 756 ret = regmap_update_bits(tas6424->regmap, TAS6424_MODE_CTRL, 757 TAS6424_RESET, TAS6424_RESET); 758 if (ret) { 759 dev_err(dev, "unable to reset device: %d\n", ret); 760 return ret; 761 } 762 763 INIT_DELAYED_WORK(&tas6424->fault_check_work, tas6424_fault_check_work); 764 765 ret = devm_snd_soc_register_component(dev, &soc_codec_dev_tas6424, 766 tas6424_dai, ARRAY_SIZE(tas6424_dai)); 767 if (ret < 0) { 768 dev_err(dev, "unable to register codec: %d\n", ret); 769 return ret; 770 } 771 772 return 0; 773} 774 775static int tas6424_i2c_remove(struct i2c_client *client) 776{ 777 struct device *dev = &client->dev; 778 struct tas6424_data *tas6424 = dev_get_drvdata(dev); 779 int ret; 780 781 cancel_delayed_work_sync(&tas6424->fault_check_work); 782 783 /* put the codec in stand-by */ 784 if (tas6424->standby_gpio) 785 gpiod_set_value_cansleep(tas6424->standby_gpio, 1); 786 787 ret = regulator_bulk_disable(ARRAY_SIZE(tas6424->supplies), 788 tas6424->supplies); 789 if (ret < 0) { 790 dev_err(dev, "unable to disable supplies: %d\n", ret); 791 return ret; 792 } 793 794 return 0; 795} 796 797static const struct i2c_device_id tas6424_i2c_ids[] = { 798 { "tas6424", 0 }, 799 { } 800}; 801MODULE_DEVICE_TABLE(i2c, tas6424_i2c_ids); 802 803static struct i2c_driver tas6424_i2c_driver = { 804 .driver = { 805 .name = "tas6424", 806 .of_match_table = of_match_ptr(tas6424_of_ids), 807 }, 808 .probe = tas6424_i2c_probe, 809 .remove = tas6424_i2c_remove, 810 .id_table = tas6424_i2c_ids, 811}; 812module_i2c_driver(tas6424_i2c_driver); 813 814MODULE_AUTHOR("Andreas Dannenberg <dannenberg@ti.com>"); 815MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>"); 816MODULE_DESCRIPTION("TAS6424 Audio amplifier driver"); 817MODULE_LICENSE("GPL v2"); 818