xref: /kernel/linux/linux-5.10/scripts/dtc/include-prefixes/arm64/freescale/fsl-ls1046a.dtsi

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Device Tree Include file for NXP Layerscape-1046A family SoC.
 *
 * Copyright 2016 Freescale Semiconductor, Inc.
 * Copyright 2018, 2020 NXP
 *
 * Mingkai Hu <mingkai.hu@nxp.com>
 */

#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>

/ {
	compatible = "fsl,ls1046a";
	interrupt-parent = <&gic>;
	#address-cells = <2>;
	#size-cells = <2>;

	aliases {
		crypto = &crypto;
		fman0 = &fman0;
		ethernet0 = &enet0;
		ethernet1 = &enet1;
		ethernet2 = &enet2;
		ethernet3 = &enet3;
		ethernet4 = &enet4;
		ethernet5 = &enet5;
		ethernet6 = &enet6;
		ethernet7 = &enet7;
		rtc1 = &ftm_alarm0;
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu0: cpu@0 {
			device_type = "cpu";
			compatible = "arm,cortex-a72";
			reg = <0x0>;
			clocks = <&clockgen 1 0>;
			next-level-cache = <&l2>;
			cpu-idle-states = <&CPU_PH20>;
			#cooling-cells = <2>;
		};

		cpu1: cpu@1 {
			device_type = "cpu";
			compatible = "arm,cortex-a72";
			reg = <0x1>;
			clocks = <&clockgen 1 0>;
			next-level-cache = <&l2>;
			cpu-idle-states = <&CPU_PH20>;
			#cooling-cells = <2>;
		};

		cpu2: cpu@2 {
			device_type = "cpu";
			compatible = "arm,cortex-a72";
			reg = <0x2>;
			clocks = <&clockgen 1 0>;
			next-level-cache = <&l2>;
			cpu-idle-states = <&CPU_PH20>;
			#cooling-cells = <2>;
		};

		cpu3: cpu@3 {
			device_type = "cpu";
			compatible = "arm,cortex-a72";
			reg = <0x3>;
			clocks = <&clockgen 1 0>;
			next-level-cache = <&l2>;
			cpu-idle-states = <&CPU_PH20>;
			#cooling-cells = <2>;
		};

		l2: l2-cache {
			compatible = "cache";
		};
	};

	idle-states {
		/*
		 * PSCI node is not added default, U-boot will add missing
		 * parts if it determines to use PSCI.
		 */
		entry-method = "psci";

		CPU_PH20: cpu-ph20 {
			compatible = "arm,idle-state";
			idle-state-name = "PH20";
			arm,psci-suspend-param = <0x0>;
			entry-latency-us = <1000>;
			exit-latency-us = <1000>;
			min-residency-us = <3000>;
		};
	};

	memory@80000000 {
		device_type = "memory";
		/* Real size will be filled by bootloader */
		reg = <0x0 0x80000000 0x0 0x0>;
	};

	sysclk: sysclk {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <100000000>;
		clock-output-names = "sysclk";
	};

	reboot {
		compatible ="syscon-reboot";
		regmap = <&dcfg>;
		offset = <0xb0>;
		mask = <0x02>;
	};

	thermal-zones {
		ddr-controller {
			polling-delay-passive = <1000>;
			polling-delay = <5000>;
			thermal-sensors = <&tmu 0>;

			trips {
				ddr-ctrler-alert {
					temperature = <85000>;
					hysteresis = <2000>;
					type = "passive";
				};

				ddr-ctrler-crit {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};
		};

		serdes {
			polling-delay-passive = <1000>;
			polling-delay = <5000>;
			thermal-sensors = <&tmu 1>;

			trips {
				serdes-alert {
					temperature = <85000>;
					hysteresis = <2000>;
					type = "passive";
				};

				serdes-crit {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};
		};

		fman {
			polling-delay-passive = <1000>;
			polling-delay = <5000>;
			thermal-sensors = <&tmu 2>;

			trips {
				fman-alert {
					temperature = <85000>;
					hysteresis = <2000>;
					type = "passive";
				};

				fman-crit {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};
		};

		core-cluster {
			polling-delay-passive = <1000>;
			polling-delay = <5000>;
			thermal-sensors = <&tmu 3>;

			trips {
				core_cluster_alert: core-cluster-alert {
					temperature = <85000>;
					hysteresis = <2000>;
					type = "passive";
				};

				core_cluster_crit: core-cluster-crit {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};

			cooling-maps {
				map0 {
					trip = <&core_cluster_alert>;
					cooling-device =
						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
						<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
						<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
						<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};

		sec {
			polling-delay-passive = <1000>;
			polling-delay = <5000>;
			thermal-sensors = <&tmu 4>;

			trips {
				sec-alert {
					temperature = <85000>;
					hysteresis = <2000>;
					type = "passive";
				};

				sec-crit {
					temperature = <95000>;
					hysteresis = <2000>;
					type = "critical";
				};
			};
		};
	};

	timer {
		compatible = "arm,armv8-timer";
		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0xf) |
					  IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 14 (GIC_CPU_MASK_RAW(0xf) |
					  IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 11 (GIC_CPU_MASK_RAW(0xf) |
					  IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(0xf) |
					  IRQ_TYPE_LEVEL_LOW)>;
	};

	pmu {
		compatible = "arm,cortex-a72-pmu";
		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
		interrupt-affinity = <&cpu0>,
				     <&cpu1>,
				     <&cpu2>,
				     <&cpu3>;
	};

	gic: interrupt-controller@1400000 {
		compatible = "arm,gic-400";
		#interrupt-cells = <3>;
		interrupt-controller;
		reg = <0x0 0x1410000 0 0x10000>, /* GICD */
		      <0x0 0x1420000 0 0x20000>, /* GICC */
		      <0x0 0x1440000 0 0x20000>, /* GICH */
		      <0x0 0x1460000 0 0x20000>; /* GICV */
		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) |
					 IRQ_TYPE_LEVEL_LOW)>;
	};

	soc: soc {
		compatible = "simple-bus";
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		ddr: memory-controller@1080000 {
			compatible = "fsl,qoriq-memory-controller";
			reg = <0x0 0x1080000 0x0 0x1000>;
			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
			big-endian;
		};

		ifc: ifc@1530000 {
			compatible = "fsl,ifc", "simple-bus";
			reg = <0x0 0x1530000 0x0 0x10000>;
			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
			status = "disabled";
		};

		qspi: spi@1550000 {
			compatible = "fsl,ls1021a-qspi";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x0 0x1550000 0x0 0x10000>,
				<0x0 0x40000000 0x0 0x10000000>;
			reg-names = "QuadSPI", "QuadSPI-memory";
			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
			clock-names = "qspi_en", "qspi";
			clocks = <&clockgen 4 1>, <&clockgen 4 1>;
			status = "disabled";
		};

		esdhc: esdhc@1560000 {
			compatible = "fsl,ls1046a-esdhc", "fsl,esdhc";
			reg = <0x0 0x1560000 0x0 0x10000>;
			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&clockgen 2 1>;
			voltage-ranges = <1800 1800 3300 3300>;
			sdhci,auto-cmd12;
			big-endian;
			bus-width = <4>;
		};

		scfg: scfg@1570000 {
			compatible = "fsl,ls1046a-scfg", "syscon";
			reg = <0x0 0x1570000 0x0 0x10000>;
			big-endian;
		};

		crypto: crypto@1700000 {
			compatible = "fsl,sec-v5.4", "fsl,sec-v5.0",
				     "fsl,sec-v4.0";
			fsl,sec-era = <8>;
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0x0 0x00 0x1700000 0x100000>;
			reg = <0x00 0x1700000 0x0 0x100000>;
			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
			dma-coherent;

			sec_jr0: jr@10000 {
				compatible = "fsl,sec-v5.4-job-ring",
					     "fsl,sec-v5.0-job-ring",
					     "fsl,sec-v4.0-job-ring";
				reg	   = <0x10000 0x10000>;
				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
			};

			sec_jr1: jr@20000 {
				compatible = "fsl,sec-v5.4-job-ring",
					     "fsl,sec-v5.0-job-ring",
					     "fsl,sec-v4.0-job-ring";
				reg	   = <0x20000 0x10000>;
				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
			};

			sec_jr2: jr@30000 {
				compatible = "fsl,sec-v5.4-job-ring",
					     "fsl,sec-v5.0-job-ring",
					     "fsl,sec-v4.0-job-ring";
				reg	   = <0x30000 0x10000>;
				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
			};

			sec_jr3: jr@40000 {
				compatible = "fsl,sec-v5.4-job-ring",
					     "fsl,sec-v5.0-job-ring",
					     "fsl,sec-v4.0-job-ring";
				reg	   = <0x40000 0x10000>;
				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
			};
		};

		qman: qman@1880000 {
			compatible = "fsl,qman";
			reg = <0x0 0x1880000 0x0 0x10000>;
			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
			memory-region = <&qman_fqd &qman_pfdr>;

		};

		bman: bman@1890000 {
			compatible = "fsl,bman";
			reg = <0x0 0x1890000 0x0 0x10000>;
			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
			memory-region = <&bman_fbpr>;

		};

		qportals: qman-portals@500000000 {
			ranges = <0x0 0x5 0x00000000 0x8000000>;
		};

		bportals: bman-portals@508000000 {
			ranges = <0x0 0x5 0x08000000 0x8000000>;
		};

		dcfg: dcfg@1ee0000 {
			compatible = "fsl,ls1046a-dcfg", "syscon";
			reg = <0x0 0x1ee0000 0x0 0x1000>;
			big-endian;
		};

		clockgen: clocking@1ee1000 {
			compatible = "fsl,ls1046a-clockgen";
			reg = <0x0 0x1ee1000 0x0 0x1000>;
			#clock-cells = <2>;
			clocks = <&sysclk>;
		};

		tmu: tmu@1f00000 {
			compatible = "fsl,qoriq-tmu";
			reg = <0x0 0x1f00000 0x0 0x10000>;
			interrupts = <0 33 0x4>;
			fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
			fsl,tmu-calibration =
				/* Calibration data group 1 */
				<0x00000000 0x00000026
				0x00000001 0x0000002d
				0x00000002 0x00000032
				0x00000003 0x00000039
				0x00000004 0x0000003f
				0x00000005 0x00000046
				0x00000006 0x0000004d
				0x00000007 0x00000054
				0x00000008 0x0000005a
				0x00000009 0x00000061
				0x0000000a 0x0000006a
				0x0000000b 0x00000071
				/* Calibration data group 2 */
				0x00010000 0x00000025
				0x00010001 0x0000002c
				0x00010002 0x00000035
				0x00010003 0x0000003d
				0x00010004 0x00000045
				0x00010005 0x0000004e
				0x00010006 0x00000057
				0x00010007 0x00000061
				0x00010008 0x0000006b
				0x00010009 0x00000076
				/* Calibration data group 3 */
				0x00020000 0x00000029
				0x00020001 0x00000033
				0x00020002 0x0000003d
				0x00020003 0x00000049
				0x00020004 0x00000056
				0x00020005 0x00000061
				0x00020006 0x0000006d
				/* Calibration data group 4 */
				0x00030000 0x00000021
				0x00030001 0x0000002a
				0x00030002 0x0000003c
				0x00030003 0x0000004e>;
			big-endian;
			#thermal-sensor-cells = <1>;
		};

		dspi: spi@2100000 {
			compatible = "fsl,ls1021a-v1.0-dspi";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x0 0x2100000 0x0 0x10000>;
			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
			clock-names = "dspi";
			clocks = <&clockgen 4 1>;
			spi-num-chipselects = <5>;
			big-endian;
			status = "disabled";
		};

		i2c0: i2c@2180000 {
			compatible = "fsl,vf610-i2c";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x0 0x2180000 0x0 0x10000>;
			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&clockgen 4 1>;
			dmas = <&edma0 1 39>,
			       <&edma0 1 38>;
			dma-names = "tx", "rx";
			status = "disabled";
		};

		i2c1: i2c@2190000 {
			compatible = "fsl,vf610-i2c";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x0 0x2190000 0x0 0x10000>;
			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&clockgen 4 1>;
			status = "disabled";
		};

		i2c2: i2c@21a0000 {
			compatible = "fsl,vf610-i2c";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x0 0x21a0000 0x0 0x10000>;
			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&clockgen 4 1>;
			status = "disabled";
		};

		i2c3: i2c@21b0000 {
			compatible = "fsl,vf610-i2c";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x0 0x21b0000 0x0 0x10000>;
			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&clockgen 4 1>;
			status = "disabled";
		};

		duart0: serial@21c0500 {
			compatible = "fsl,ns16550", "ns16550a";
			reg = <0x00 0x21c0500 0x0 0x100>;
			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&clockgen 4 1>;
			status = "disabled";
		};

		duart1: serial@21c0600 {
			compatible = "fsl,ns16550", "ns16550a";
			reg = <0x00 0x21c0600 0x0 0x100>;
			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&clockgen 4 1>;
			status = "disabled";
		};

		duart2: serial@21d0500 {
			compatible = "fsl,ns16550", "ns16550a";
			reg = <0x0 0x21d0500 0x0 0x100>;
			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&clockgen 4 1>;
			status = "disabled";
		};

		duart3: serial@21d0600 {
			compatible = "fsl,ns16550", "ns16550a";
			reg = <0x0 0x21d0600 0x0 0x100>;
			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&clockgen 4 1>;
			status = "disabled";
		};

		gpio0: gpio@2300000 {
			compatible = "fsl,qoriq-gpio";
			reg = <0x0 0x2300000 0x0 0x10000>;
			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			#gpio-cells = <2>;
			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpio1: gpio@2310000 {
			compatible = "fsl,qoriq-gpio";
			reg = <0x0 0x2310000 0x0 0x10000>;
			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			#gpio-cells = <2>;
			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpio2: gpio@2320000 {
			compatible = "fsl,qoriq-gpio";
			reg = <0x0 0x2320000 0x0 0x10000>;
			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			#gpio-cells = <2>;
			interrupt-controller;
			#interrupt-cells = <2>;
		};

		gpio3: gpio@2330000 {
			compatible = "fsl,qoriq-gpio";
			reg = <0x0 0x2330000 0x0 0x10000>;
			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			#gpio-cells = <2>;
			interrupt-controller;
			#interrupt-cells = <2>;
		};

		lpuart0: serial@2950000 {
			compatible = "fsl,ls1021a-lpuart";
			reg = <0x0 0x2950000 0x0 0x1000>;
			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&clockgen 4 0>;
			clock-names = "ipg";
			status = "disabled";
		};

		lpuart1: serial@2960000 {
			compatible = "fsl,ls1021a-lpuart";
			reg = <0x0 0x2960000 0x0 0x1000>;
			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&clockgen 4 1>;
			clock-names = "ipg";
			status = "disabled";
		};

		lpuart2: serial@2970000 {
			compatible = "fsl,ls1021a-lpuart";
			reg = <0x0 0x2970000 0x0 0x1000>;
			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&clockgen 4 1>;
			clock-names = "ipg";
			status = "disabled";
		};

		lpuart3: serial@2980000 {
			compatible = "fsl,ls1021a-lpuart";
			reg = <0x0 0x2980000 0x0 0x1000>;
			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&clockgen 4 1>;
			clock-names = "ipg";
			status = "disabled";
		};

		lpuart4: serial@2990000 {
			compatible = "fsl,ls1021a-lpuart";
			reg = <0x0 0x2990000 0x0 0x1000>;
			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&clockgen 4 1>;
			clock-names = "ipg";
			status = "disabled";
		};

		lpuart5: serial@29a0000 {
			compatible = "fsl,ls1021a-lpuart";
			reg = <0x0 0x29a0000 0x0 0x1000>;
			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&clockgen 4 1>;
			clock-names = "ipg";
			status = "disabled";
		};

		wdog0: watchdog@2ad0000 {
			compatible = "fsl,imx21-wdt";
			reg = <0x0 0x2ad0000 0x0 0x10000>;
			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&clockgen 4 1>;
			big-endian;
		};

		edma0: edma@2c00000 {
			#dma-cells = <2>;
			compatible = "fsl,vf610-edma";
			reg = <0x0 0x2c00000 0x0 0x10000>,
			      <0x0 0x2c10000 0x0 0x10000>,
			      <0x0 0x2c20000 0x0 0x10000>;
			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "edma-tx", "edma-err";
			dma-channels = <32>;
			big-endian;
			clock-names = "dmamux0", "dmamux1";
			clocks = <&clockgen 4 1>,
				 <&clockgen 4 1>;
		};

		usb0: usb@2f00000 {
			compatible = "snps,dwc3";
			reg = <0x0 0x2f00000 0x0 0x10000>;
			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
			dr_mode = "host";
			snps,quirk-frame-length-adjustment = <0x20>;
			snps,dis_rxdet_inp3_quirk;
			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
		};

		usb1: usb@3000000 {
			compatible = "snps,dwc3";
			reg = <0x0 0x3000000 0x0 0x10000>;
			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
			dr_mode = "host";
			snps,quirk-frame-length-adjustment = <0x20>;
			snps,dis_rxdet_inp3_quirk;
			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
		};

		usb2: usb@3100000 {
			compatible = "snps,dwc3";
			reg = <0x0 0x3100000 0x0 0x10000>;
			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
			dr_mode = "host";
			snps,quirk-frame-length-adjustment = <0x20>;
			snps,dis_rxdet_inp3_quirk;
			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
		};

		sata: sata@3200000 {
			compatible = "fsl,ls1046a-ahci";
			reg = <0x0 0x3200000 0x0 0x10000>,
				<0x0 0x20140520 0x0 0x4>;
			reg-names = "ahci", "sata-ecc";
			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&clockgen 4 1>;
		};

		msi1: msi-controller@1580000 {
			compatible = "fsl,ls1046a-msi";
			msi-controller;
			reg = <0x0 0x1580000 0x0 0x10000>;
			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
		};

		msi2: msi-controller@1590000 {
			compatible = "fsl,ls1046a-msi";
			msi-controller;
			reg = <0x0 0x1590000 0x0 0x10000>;
			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
		};

		msi3: msi-controller@15a0000 {
			compatible = "fsl,ls1046a-msi";
			msi-controller;
			reg = <0x0 0x15a0000 0x0 0x10000>;
			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
		};

		pcie1: pcie@3400000 {
			compatible = "fsl,ls1046a-pcie";
			reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
			       0x40 0x00000000 0x0 0x00002000>; /* configuration space */
			reg-names = "regs", "config";
			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
			interrupt-names = "aer", "pme";
			#address-cells = <3>;
			#size-cells = <2>;
			device_type = "pci";
			dma-coherent;
			num-viewport = <8>;
			bus-range = <0x0 0xff>;
			ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
				  0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
			msi-parent = <&msi1>, <&msi2>, <&msi3>;
			#interrupt-cells = <1>;
			interrupt-map-mask = <0 0 0 7>;
			interrupt-map = <0000 0 0 1 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
					<0000 0 0 2 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
					<0000 0 0 3 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
					<0000 0 0 4 &gic GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
			status = "disabled";
		};

		pcie_ep1: pcie_ep@3400000 {
			compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep";
			reg = <0x00 0x03400000 0x0 0x00100000
				0x40 0x00000000 0x8 0x00000000>;
			reg-names = "regs", "addr_space";
			num-ib-windows = <6>;
			num-ob-windows = <8>;
			status = "disabled";
		};

		pcie2: pcie@3500000 {
			compatible = "fsl,ls1046a-pcie";
			reg = <0x00 0x03500000 0x0 0x00100000   /* controller registers */
			       0x48 0x00000000 0x0 0x00002000>; /* configuration space */
			reg-names = "regs", "config";
			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
			interrupt-names = "aer", "pme";
			#address-cells = <3>;
			#size-cells = <2>;
			device_type = "pci";
			dma-coherent;
			num-viewport = <8>;
			bus-range = <0x0 0xff>;
			ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000   /* downstream I/O */
				  0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
			msi-parent = <&msi2>, <&msi3>, <&msi1>;
			#interrupt-cells = <1>;
			interrupt-map-mask = <0 0 0 7>;
			interrupt-map = <0000 0 0 1 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
					<0000 0 0 2 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
					<0000 0 0 3 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
					<0000 0 0 4 &gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
			status = "disabled";
		};

		pcie_ep2: pcie_ep@3500000 {
			compatible = "fsl,ls1046a-pcie-ep","fsl,ls-pcie-ep";
			reg = <0x00 0x03500000 0x0 0x00100000
				0x48 0x00000000 0x8 0x00000000>;
			reg-names = "regs", "addr_space";
			num-ib-windows = <6>;
			num-ob-windows = <8>;
			status = "disabled";
		};

		pcie3: pcie@3600000 {
			compatible = "fsl,ls1046a-pcie";
			reg = <0x00 0x03600000 0x0 0x00100000   /* controller registers */
			       0x50 0x00000000 0x0 0x00002000>; /* configuration space */
			reg-names = "regs", "config";
			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
			interrupt-names = "aer", "pme";
			#address-cells = <3>;
			#size-cells = <2>;
			device_type = "pci";
			dma-coherent;
			num-viewport = <8>;
			bus-range = <0x0 0xff>;
			ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000   /* downstream I/O */
				  0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
			msi-parent = <&msi3>, <&msi1>, <&msi2>;
			#interrupt-cells = <1>;
			interrupt-map-mask = <0 0 0 7>;
			interrupt-map = <0000 0 0 1 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
					<0000 0 0 2 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
					<0000 0 0 3 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
					<0000 0 0 4 &gic GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
			status = "disabled";
		};

		pcie_ep3: pcie_ep@3600000 {
			compatible = "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep";
			reg = <0x00 0x03600000 0x0 0x00100000
				0x50 0x00000000 0x8 0x00000000>;
			reg-names = "regs", "addr_space";
			num-ib-windows = <6>;
			num-ob-windows = <8>;
			status = "disabled";
		};

		qdma: dma-controller@8380000 {
			compatible = "fsl,ls1046a-qdma", "fsl,ls1021a-qdma";
			reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */
			      <0x0 0x8390000 0x0 0x10000>, /* Status regs */
			      <0x0 0x83a0000 0x0 0x40000>; /* Block regs */
			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "qdma-error", "qdma-queue0",
				"qdma-queue1", "qdma-queue2", "qdma-queue3";
			dma-channels = <8>;
			block-number = <1>;
			block-offset = <0x10000>;
			fsl,dma-queues = <2>;
			status-sizes = <64>;
			queue-sizes = <64 64>;
			big-endian;
		};

		rcpm: power-controller@1ee2140 {
			compatible = "fsl,ls1046a-rcpm", "fsl,qoriq-rcpm-2.1+";
			reg = <0x0 0x1ee2140 0x0 0x4>;
			#fsl,rcpm-wakeup-cells = <1>;
		};

		ftm_alarm0: timer@29d0000 {
			compatible = "fsl,ls1046a-ftm-alarm";
			reg = <0x0 0x29d0000 0x0 0x10000>;
			fsl,rcpm-wakeup = <&rcpm 0x20000>;
			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
			big-endian;
		};
	};

	reserved-memory {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		bman_fbpr: bman-fbpr {
			compatible = "shared-dma-pool";
			size = <0 0x1000000>;
			alignment = <0 0x1000000>;
			no-map;
		};

		qman_fqd: qman-fqd {
			compatible = "shared-dma-pool";
			size = <0 0x800000>;
			alignment = <0 0x800000>;
			no-map;
		};

		qman_pfdr: qman-pfdr {
			compatible = "shared-dma-pool";
			size = <0 0x2000000>;
			alignment = <0 0x2000000>;
			no-map;
		};
	};

	firmware {
		optee {
			compatible = "linaro,optee-tz";
			method = "smc";
		};
	};
};

#include "qoriq-qman-portals.dtsi"
#include "qoriq-bman-portals.dtsi"