1/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ 2/* 3 * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org> et al. 4 * 5 * This program is free software; you can redistribute it and/or modify 6 * it under the terms of the GNU General Public License as published by 7 * the Free Software Foundation; either version 2 of the License, or 8 * (at your option) any later version. 9 * 10 * This program is distributed in the hope that it will be useful, 11 * but WITHOUT ANY WARRANTY; without even the implied warranty of 12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 * GNU General Public License for more details. 14 * 15 * You should have received a copy of the GNU General Public License 16 * along with this program; if not, write to the Free Software 17 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 18 * 19 */ 20 21#ifndef __MTD_ABI_H__ 22#define __MTD_ABI_H__ 23 24#include <linux/types.h> 25 26struct erase_info_user { 27 __u32 start; 28 __u32 length; 29}; 30 31struct erase_info_user64 { 32 __u64 start; 33 __u64 length; 34}; 35 36struct mtd_oob_buf { 37 __u32 start; 38 __u32 length; 39 unsigned char __user *ptr; 40}; 41 42struct mtd_oob_buf64 { 43 __u64 start; 44 __u32 pad; 45 __u32 length; 46 __u64 usr_ptr; 47}; 48 49/** 50 * MTD operation modes 51 * 52 * @MTD_OPS_PLACE_OOB: OOB data are placed at the given offset (default) 53 * @MTD_OPS_AUTO_OOB: OOB data are automatically placed at the free areas 54 * which are defined by the internal ecclayout 55 * @MTD_OPS_RAW: data are transferred as-is, with no error correction; 56 * this mode implies %MTD_OPS_PLACE_OOB 57 * 58 * These modes can be passed to ioctl(MEMWRITE) and are also used internally. 59 * See notes on "MTD file modes" for discussion on %MTD_OPS_RAW vs. 60 * %MTD_FILE_MODE_RAW. 61 */ 62enum { 63 MTD_OPS_PLACE_OOB = 0, 64 MTD_OPS_AUTO_OOB = 1, 65 MTD_OPS_RAW = 2, 66}; 67 68/** 69 * struct mtd_write_req - data structure for requesting a write operation 70 * 71 * @start: start address 72 * @len: length of data buffer 73 * @ooblen: length of OOB buffer 74 * @usr_data: user-provided data buffer 75 * @usr_oob: user-provided OOB buffer 76 * @mode: MTD mode (see "MTD operation modes") 77 * @padding: reserved, must be set to 0 78 * 79 * This structure supports ioctl(MEMWRITE) operations, allowing data and/or OOB 80 * writes in various modes. To write to OOB-only, set @usr_data == NULL, and to 81 * write data-only, set @usr_oob == NULL. However, setting both @usr_data and 82 * @usr_oob to NULL is not allowed. 83 */ 84struct mtd_write_req { 85 __u64 start; 86 __u64 len; 87 __u64 ooblen; 88 __u64 usr_data; 89 __u64 usr_oob; 90 __u8 mode; 91 __u8 padding[7]; 92}; 93 94#define MTD_ABSENT 0 95#define MTD_RAM 1 96#define MTD_ROM 2 97#define MTD_NORFLASH 3 98#define MTD_NANDFLASH 4 /* SLC NAND */ 99#define MTD_DATAFLASH 6 100#define MTD_UBIVOLUME 7 101#define MTD_MLCNANDFLASH 8 /* MLC NAND (including TLC) */ 102 103#define MTD_WRITEABLE 0x400 /* Device is writeable */ 104#define MTD_BIT_WRITEABLE 0x800 /* Single bits can be flipped */ 105#define MTD_NO_ERASE 0x1000 /* No erase necessary */ 106#define MTD_POWERUP_LOCK 0x2000 /* Always locked after reset */ 107#define MTD_SLC_ON_MLC_EMULATION 0x4000 /* Emulate SLC behavior on MLC NANDs */ 108 109/* Some common devices / combinations of capabilities */ 110#define MTD_CAP_ROM 0 111#define MTD_CAP_RAM (MTD_WRITEABLE | MTD_BIT_WRITEABLE | MTD_NO_ERASE) 112#define MTD_CAP_NORFLASH (MTD_WRITEABLE | MTD_BIT_WRITEABLE) 113#define MTD_CAP_NANDFLASH (MTD_WRITEABLE) 114#define MTD_CAP_NVRAM (MTD_WRITEABLE | MTD_BIT_WRITEABLE | MTD_NO_ERASE) 115 116/* Obsolete ECC byte placement modes (used with obsolete MEMGETOOBSEL) */ 117#define MTD_NANDECC_OFF 0 /* Switch off ECC (Not recommended) */ 118#define MTD_NANDECC_PLACE 1 /* Use the given placement in the structure (YAFFS1 legacy mode) */ 119#define MTD_NANDECC_AUTOPLACE 2 /* Use the default placement scheme */ 120#define MTD_NANDECC_PLACEONLY 3 /* Use the given placement in the structure (Do not store ecc result on read) */ 121#define MTD_NANDECC_AUTOPL_USR 4 /* Use the given autoplacement scheme rather than using the default */ 122 123/* OTP mode selection */ 124#define MTD_OTP_OFF 0 125#define MTD_OTP_FACTORY 1 126#define MTD_OTP_USER 2 127 128struct mtd_info_user { 129 __u8 type; 130 __u32 flags; 131 __u32 size; /* Total size of the MTD */ 132 __u32 erasesize; 133 __u32 writesize; 134 __u32 oobsize; /* Amount of OOB data per block (e.g. 16) */ 135 __u64 padding; /* Old obsolete field; do not use */ 136}; 137 138struct region_info_user { 139 __u32 offset; /* At which this region starts, 140 * from the beginning of the MTD */ 141 __u32 erasesize; /* For this region */ 142 __u32 numblocks; /* Number of blocks in this region */ 143 __u32 regionindex; 144}; 145 146struct otp_info { 147 __u32 start; 148 __u32 length; 149 __u32 locked; 150}; 151 152/* 153 * Note, the following ioctl existed in the past and was removed: 154 * #define MEMSETOOBSEL _IOW('M', 9, struct nand_oobinfo) 155 * Try to avoid adding a new ioctl with the same ioctl number. 156 */ 157 158/* Get basic MTD characteristics info (better to use sysfs) */ 159#define MEMGETINFO _IOR('M', 1, struct mtd_info_user) 160/* Erase segment of MTD */ 161#define MEMERASE _IOW('M', 2, struct erase_info_user) 162/* Write out-of-band data from MTD */ 163#define MEMWRITEOOB _IOWR('M', 3, struct mtd_oob_buf) 164/* Read out-of-band data from MTD */ 165#define MEMREADOOB _IOWR('M', 4, struct mtd_oob_buf) 166/* Lock a chip (for MTD that supports it) */ 167#define MEMLOCK _IOW('M', 5, struct erase_info_user) 168/* Unlock a chip (for MTD that supports it) */ 169#define MEMUNLOCK _IOW('M', 6, struct erase_info_user) 170/* Get the number of different erase regions */ 171#define MEMGETREGIONCOUNT _IOR('M', 7, int) 172/* Get information about the erase region for a specific index */ 173#define MEMGETREGIONINFO _IOWR('M', 8, struct region_info_user) 174/* Get info about OOB modes (e.g., RAW, PLACE, AUTO) - legacy interface */ 175#define MEMGETOOBSEL _IOR('M', 10, struct nand_oobinfo) 176/* Check if an eraseblock is bad */ 177#define MEMGETBADBLOCK _IOW('M', 11, __kernel_loff_t) 178/* Mark an eraseblock as bad */ 179#define MEMSETBADBLOCK _IOW('M', 12, __kernel_loff_t) 180/* Set OTP (One-Time Programmable) mode (factory vs. user) */ 181#define OTPSELECT _IOR('M', 13, int) 182/* Get number of OTP (One-Time Programmable) regions */ 183#define OTPGETREGIONCOUNT _IOW('M', 14, int) 184/* Get all OTP (One-Time Programmable) info about MTD */ 185#define OTPGETREGIONINFO _IOW('M', 15, struct otp_info) 186/* Lock a given range of user data (must be in mode %MTD_FILE_MODE_OTP_USER) */ 187#define OTPLOCK _IOR('M', 16, struct otp_info) 188/* Get ECC layout (deprecated) */ 189#define ECCGETLAYOUT _IOR('M', 17, struct nand_ecclayout_user) 190/* Get statistics about corrected/uncorrected errors */ 191#define ECCGETSTATS _IOR('M', 18, struct mtd_ecc_stats) 192/* Set MTD mode on a per-file-descriptor basis (see "MTD file modes") */ 193#define MTDFILEMODE _IO('M', 19) 194/* Erase segment of MTD (supports 64-bit address) */ 195#define MEMERASE64 _IOW('M', 20, struct erase_info_user64) 196/* Write data to OOB (64-bit version) */ 197#define MEMWRITEOOB64 _IOWR('M', 21, struct mtd_oob_buf64) 198/* Read data from OOB (64-bit version) */ 199#define MEMREADOOB64 _IOWR('M', 22, struct mtd_oob_buf64) 200/* Check if chip is locked (for MTD that supports it) */ 201#define MEMISLOCKED _IOR('M', 23, struct erase_info_user) 202/* 203 * Most generic write interface; can write in-band and/or out-of-band in various 204 * modes (see "struct mtd_write_req"). This ioctl is not supported for flashes 205 * without OOB, e.g., NOR flash. 206 */ 207#define MEMWRITE _IOWR('M', 24, struct mtd_write_req) 208 209/* 210 * Obsolete legacy interface. Keep it in order not to break userspace 211 * interfaces 212 */ 213struct nand_oobinfo { 214 __u32 useecc; 215 __u32 eccbytes; 216 __u32 oobfree[8][2]; 217 __u32 eccpos[32]; 218}; 219 220struct nand_oobfree { 221 __u32 offset; 222 __u32 length; 223}; 224 225#define MTD_MAX_OOBFREE_ENTRIES 8 226#define MTD_MAX_ECCPOS_ENTRIES 64 227/* 228 * OBSOLETE: ECC layout control structure. Exported to user-space via ioctl 229 * ECCGETLAYOUT for backwards compatbility and should not be mistaken as a 230 * complete set of ECC information. The ioctl truncates the larger internal 231 * structure to retain binary compatibility with the static declaration of the 232 * ioctl. Note that the "MTD_MAX_..._ENTRIES" macros represent the max size of 233 * the user struct, not the MAX size of the internal OOB layout representation. 234 */ 235struct nand_ecclayout_user { 236 __u32 eccbytes; 237 __u32 eccpos[MTD_MAX_ECCPOS_ENTRIES]; 238 __u32 oobavail; 239 struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES]; 240}; 241 242/** 243 * struct mtd_ecc_stats - error correction stats 244 * 245 * @corrected: number of corrected bits 246 * @failed: number of uncorrectable errors 247 * @badblocks: number of bad blocks in this partition 248 * @bbtblocks: number of blocks reserved for bad block tables 249 */ 250struct mtd_ecc_stats { 251 __u32 corrected; 252 __u32 failed; 253 __u32 badblocks; 254 __u32 bbtblocks; 255}; 256 257/* 258 * MTD file modes - for read/write access to MTD 259 * 260 * @MTD_FILE_MODE_NORMAL: OTP disabled, ECC enabled 261 * @MTD_FILE_MODE_OTP_FACTORY: OTP enabled in factory mode 262 * @MTD_FILE_MODE_OTP_USER: OTP enabled in user mode 263 * @MTD_FILE_MODE_RAW: OTP disabled, ECC disabled 264 * 265 * These modes can be set via ioctl(MTDFILEMODE). The mode will be retained 266 * separately for each open file descriptor. 267 * 268 * Note: %MTD_FILE_MODE_RAW provides the same functionality as %MTD_OPS_RAW - 269 * raw access to the flash, without error correction or autoplacement schemes. 270 * Wherever possible, the MTD_OPS_* mode will override the MTD_FILE_MODE_* mode 271 * (e.g., when using ioctl(MEMWRITE)), but in some cases, the MTD_FILE_MODE is 272 * used out of necessity (e.g., `write()', ioctl(MEMWRITEOOB64)). 273 */ 274enum mtd_file_modes { 275 MTD_FILE_MODE_NORMAL = MTD_OTP_OFF, 276 MTD_FILE_MODE_OTP_FACTORY = MTD_OTP_FACTORY, 277 MTD_FILE_MODE_OTP_USER = MTD_OTP_USER, 278 MTD_FILE_MODE_RAW, 279}; 280 281static inline int mtd_type_is_nand_user(const struct mtd_info_user *mtd) 282{ 283 return mtd->type == MTD_NANDFLASH || mtd->type == MTD_MLCNANDFLASH; 284} 285 286#endif /* __MTD_ABI_H__ */ 287