1/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */
2/*
3 * This file is provided under a dual BSD/GPLv2 license.  When using or
4 * redistributing this file, you may do so under either license.
5 *
6 * Copyright(c) 2018 Intel Corporation. All rights reserved.
7 */
8
9#ifndef __INCLUDE_SOUND_SOF_HEADER_H__
10#define __INCLUDE_SOUND_SOF_HEADER_H__
11
12#include <linux/types.h>
13#include <uapi/sound/sof/abi.h>
14
15/** \addtogroup sof_uapi uAPI
16 *  SOF uAPI specification.
17 *  @{
18 */
19
20/*
21 * IPC messages have a prefixed 32 bit identifier made up as follows :-
22 *
23 * 0xGCCCNNNN where
24 * G is global cmd type (4 bits)
25 * C is command type (12 bits)
26 * I is the ID number (16 bits) - monotonic and overflows
27 *
28 * This is sent at the start of the IPM message in the mailbox. Messages should
29 * not be sent in the doorbell (special exceptions for firmware .
30 */
31
32/* Global Message - Generic */
33#define SOF_GLB_TYPE_SHIFT			28
34#define SOF_GLB_TYPE_MASK			(0xf << SOF_GLB_TYPE_SHIFT)
35#define SOF_GLB_TYPE(x)				((x) << SOF_GLB_TYPE_SHIFT)
36
37/* Command Message - Generic */
38#define SOF_CMD_TYPE_SHIFT			16
39#define SOF_CMD_TYPE_MASK			(0xfff << SOF_CMD_TYPE_SHIFT)
40#define SOF_CMD_TYPE(x)				((x) << SOF_CMD_TYPE_SHIFT)
41
42/* Global Message Types */
43#define SOF_IPC_GLB_REPLY			SOF_GLB_TYPE(0x1U)
44#define SOF_IPC_GLB_COMPOUND			SOF_GLB_TYPE(0x2U)
45#define SOF_IPC_GLB_TPLG_MSG			SOF_GLB_TYPE(0x3U)
46#define SOF_IPC_GLB_PM_MSG			SOF_GLB_TYPE(0x4U)
47#define SOF_IPC_GLB_COMP_MSG			SOF_GLB_TYPE(0x5U)
48#define SOF_IPC_GLB_STREAM_MSG			SOF_GLB_TYPE(0x6U)
49#define SOF_IPC_FW_READY			SOF_GLB_TYPE(0x7U)
50#define SOF_IPC_GLB_DAI_MSG			SOF_GLB_TYPE(0x8U)
51#define SOF_IPC_GLB_TRACE_MSG			SOF_GLB_TYPE(0x9U)
52#define SOF_IPC_GLB_GDB_DEBUG                   SOF_GLB_TYPE(0xAU)
53#define SOF_IPC_GLB_TEST_MSG			SOF_GLB_TYPE(0xBU)
54#define SOF_IPC_GLB_PROBE			SOF_GLB_TYPE(0xCU)
55
56/*
57 * DSP Command Message Types
58 */
59
60/* topology */
61#define SOF_IPC_TPLG_COMP_NEW			SOF_CMD_TYPE(0x001)
62#define SOF_IPC_TPLG_COMP_FREE			SOF_CMD_TYPE(0x002)
63#define SOF_IPC_TPLG_COMP_CONNECT		SOF_CMD_TYPE(0x003)
64#define SOF_IPC_TPLG_PIPE_NEW			SOF_CMD_TYPE(0x010)
65#define SOF_IPC_TPLG_PIPE_FREE			SOF_CMD_TYPE(0x011)
66#define SOF_IPC_TPLG_PIPE_CONNECT		SOF_CMD_TYPE(0x012)
67#define SOF_IPC_TPLG_PIPE_COMPLETE		SOF_CMD_TYPE(0x013)
68#define SOF_IPC_TPLG_BUFFER_NEW			SOF_CMD_TYPE(0x020)
69#define SOF_IPC_TPLG_BUFFER_FREE		SOF_CMD_TYPE(0x021)
70
71/* PM */
72#define SOF_IPC_PM_CTX_SAVE			SOF_CMD_TYPE(0x001)
73#define SOF_IPC_PM_CTX_RESTORE			SOF_CMD_TYPE(0x002)
74#define SOF_IPC_PM_CTX_SIZE			SOF_CMD_TYPE(0x003)
75#define SOF_IPC_PM_CLK_SET			SOF_CMD_TYPE(0x004)
76#define SOF_IPC_PM_CLK_GET			SOF_CMD_TYPE(0x005)
77#define SOF_IPC_PM_CLK_REQ			SOF_CMD_TYPE(0x006)
78#define SOF_IPC_PM_CORE_ENABLE			SOF_CMD_TYPE(0x007)
79#define SOF_IPC_PM_GATE				SOF_CMD_TYPE(0x008)
80
81/* component runtime config - multiple different types */
82#define SOF_IPC_COMP_SET_VALUE			SOF_CMD_TYPE(0x001)
83#define SOF_IPC_COMP_GET_VALUE			SOF_CMD_TYPE(0x002)
84#define SOF_IPC_COMP_SET_DATA			SOF_CMD_TYPE(0x003)
85#define SOF_IPC_COMP_GET_DATA			SOF_CMD_TYPE(0x004)
86#define SOF_IPC_COMP_NOTIFICATION		SOF_CMD_TYPE(0x005)
87
88/* DAI messages */
89#define SOF_IPC_DAI_CONFIG			SOF_CMD_TYPE(0x001)
90#define SOF_IPC_DAI_LOOPBACK			SOF_CMD_TYPE(0x002)
91
92/* stream */
93#define SOF_IPC_STREAM_PCM_PARAMS		SOF_CMD_TYPE(0x001)
94#define SOF_IPC_STREAM_PCM_PARAMS_REPLY		SOF_CMD_TYPE(0x002)
95#define SOF_IPC_STREAM_PCM_FREE			SOF_CMD_TYPE(0x003)
96#define SOF_IPC_STREAM_TRIG_START		SOF_CMD_TYPE(0x004)
97#define SOF_IPC_STREAM_TRIG_STOP		SOF_CMD_TYPE(0x005)
98#define SOF_IPC_STREAM_TRIG_PAUSE		SOF_CMD_TYPE(0x006)
99#define SOF_IPC_STREAM_TRIG_RELEASE		SOF_CMD_TYPE(0x007)
100#define SOF_IPC_STREAM_TRIG_DRAIN		SOF_CMD_TYPE(0x008)
101#define SOF_IPC_STREAM_TRIG_XRUN		SOF_CMD_TYPE(0x009)
102#define SOF_IPC_STREAM_POSITION			SOF_CMD_TYPE(0x00a)
103#define SOF_IPC_STREAM_VORBIS_PARAMS		SOF_CMD_TYPE(0x010)
104#define SOF_IPC_STREAM_VORBIS_FREE		SOF_CMD_TYPE(0x011)
105
106/* probe */
107#define SOF_IPC_PROBE_INIT			SOF_CMD_TYPE(0x001)
108#define SOF_IPC_PROBE_DEINIT			SOF_CMD_TYPE(0x002)
109#define SOF_IPC_PROBE_DMA_ADD			SOF_CMD_TYPE(0x003)
110#define SOF_IPC_PROBE_DMA_INFO			SOF_CMD_TYPE(0x004)
111#define SOF_IPC_PROBE_DMA_REMOVE		SOF_CMD_TYPE(0x005)
112#define SOF_IPC_PROBE_POINT_ADD		SOF_CMD_TYPE(0x006)
113#define SOF_IPC_PROBE_POINT_INFO		SOF_CMD_TYPE(0x007)
114#define SOF_IPC_PROBE_POINT_REMOVE		SOF_CMD_TYPE(0x008)
115
116/* trace */
117#define SOF_IPC_TRACE_DMA_PARAMS		SOF_CMD_TYPE(0x001)
118#define SOF_IPC_TRACE_DMA_POSITION		SOF_CMD_TYPE(0x002)
119#define SOF_IPC_TRACE_DMA_PARAMS_EXT		SOF_CMD_TYPE(0x003)
120
121/* debug */
122#define SOF_IPC_TEST_IPC_FLOOD                  SOF_CMD_TYPE(0x001)
123
124/* Get message component id */
125#define SOF_IPC_MESSAGE_ID(x)			((x) & 0xffff)
126
127/* maximum message size for mailbox Tx/Rx */
128#define SOF_IPC_MSG_MAX_SIZE			384
129
130/*
131 * Structure Header - Header for all IPC structures except command structs.
132 * The size can be greater than the structure size and that means there is
133 * extended bespoke data beyond the end of the structure including variable
134 * arrays.
135 */
136
137struct sof_ipc_hdr {
138	uint32_t size;			/**< size of structure */
139} __packed;
140
141/*
142 * Command Header - Header for all IPC commands. Identifies IPC message.
143 * The size can be greater than the structure size and that means there is
144 * extended bespoke data beyond the end of the structure including variable
145 * arrays.
146 */
147
148struct sof_ipc_cmd_hdr {
149	uint32_t size;			/**< size of structure */
150	uint32_t cmd;			/**< SOF_IPC_GLB_ + cmd */
151} __packed;
152
153/*
154 * Generic reply message. Some commands override this with their own reply
155 * types that must include this at start.
156 */
157struct sof_ipc_reply {
158	struct sof_ipc_cmd_hdr hdr;
159	int32_t error;			/**< negative error numbers */
160}  __packed;
161
162/*
163 * Compound commands - SOF_IPC_GLB_COMPOUND.
164 *
165 * Compound commands are sent to the DSP as a single IPC operation. The
166 * commands are split into blocks and each block has a header. This header
167 * identifies the command type and the number of commands before the next
168 * header.
169 */
170
171struct sof_ipc_compound_hdr {
172	struct sof_ipc_cmd_hdr hdr;
173	uint32_t count;		/**< count of 0 means end of compound sequence */
174}  __packed;
175
176/**
177 * OOPS header architecture specific data.
178 */
179struct sof_ipc_dsp_oops_arch_hdr {
180	uint32_t arch;		/* Identifier of architecture */
181	uint32_t totalsize;	/* Total size of oops message */
182}  __packed;
183
184/**
185 * OOPS header platform specific data.
186 */
187struct sof_ipc_dsp_oops_plat_hdr {
188	uint32_t configidhi;	/* ConfigID hi 32bits */
189	uint32_t configidlo;	/* ConfigID lo 32bits */
190	uint32_t numaregs;	/* Special regs num */
191	uint32_t stackoffset;	/* Offset to stack pointer from beginning of
192				 * oops message
193				 */
194	uint32_t stackptr;	/* Stack ptr */
195}  __packed;
196
197/** @}*/
198
199#endif
200