1/* SPDX-License-Identifier: GPL-2.0-or-later */
2/* SCTP kernel implementation
3 * (C) Copyright IBM Corp. 2001, 2004
4 * Copyright (c) 1999-2000 Cisco, Inc.
5 * Copyright (c) 1999-2001 Motorola, Inc.
6 * Copyright (c) 2001 Intel Corp.
7 *
8 * This file is part of the SCTP kernel implementation
9 *
10 * Please send any bug reports or fixes you make to the
11 * email address(es):
12 *    lksctp developers <linux-sctp@vger.kernel.org>
13 *
14 * Written or modified by:
15 *   La Monte H.P. Yarroll <piggy@acm.org>
16 *   Karl Knutson          <karl@athena.chicago.il.us>
17 *   Randall Stewart       <randall@stewart.chicago.il.us>
18 *   Ken Morneau           <kmorneau@cisco.com>
19 *   Qiaobing Xie          <qxie1@motorola.com>
20 *   Xingang Guo           <xingang.guo@intel.com>
21 *   Sridhar Samudrala     <samudrala@us.ibm.com>
22 *   Daisy Chang           <daisyc@us.ibm.com>
23 */
24
25#ifndef __sctp_constants_h__
26#define __sctp_constants_h__
27
28#include <linux/sctp.h>
29#include <linux/ipv6.h> /* For ipv6hdr. */
30#include <net/tcp_states.h>  /* For TCP states used in enum sctp_sock_state */
31
32/* Value used for stream negotiation. */
33enum { SCTP_MAX_STREAM = 0xffff };
34enum { SCTP_DEFAULT_OUTSTREAMS = 10 };
35enum { SCTP_DEFAULT_INSTREAMS = SCTP_MAX_STREAM };
36
37/* Since CIDs are sparse, we need all four of the following
38 * symbols.  CIDs are dense through SCTP_CID_BASE_MAX.
39 */
40#define SCTP_CID_BASE_MAX		SCTP_CID_SHUTDOWN_COMPLETE
41
42#define SCTP_NUM_BASE_CHUNK_TYPES	(SCTP_CID_BASE_MAX + 1)
43
44#define SCTP_NUM_ADDIP_CHUNK_TYPES	2
45
46#define SCTP_NUM_PRSCTP_CHUNK_TYPES	1
47
48#define SCTP_NUM_RECONF_CHUNK_TYPES	1
49
50#define SCTP_NUM_AUTH_CHUNK_TYPES	1
51
52#define SCTP_NUM_CHUNK_TYPES		(SCTP_NUM_BASE_CHUNK_TYPES + \
53					 SCTP_NUM_ADDIP_CHUNK_TYPES +\
54					 SCTP_NUM_PRSCTP_CHUNK_TYPES +\
55					 SCTP_NUM_RECONF_CHUNK_TYPES +\
56					 SCTP_NUM_AUTH_CHUNK_TYPES)
57
58/* These are the different flavours of event.  */
59enum sctp_event_type {
60	SCTP_EVENT_T_CHUNK = 1,
61	SCTP_EVENT_T_TIMEOUT,
62	SCTP_EVENT_T_OTHER,
63	SCTP_EVENT_T_PRIMITIVE
64};
65
66/* As a convenience for the state machine, we append SCTP_EVENT_* and
67 * SCTP_ULP_* to the list of possible chunks.
68 */
69
70enum sctp_event_timeout {
71	SCTP_EVENT_TIMEOUT_NONE = 0,
72	SCTP_EVENT_TIMEOUT_T1_COOKIE,
73	SCTP_EVENT_TIMEOUT_T1_INIT,
74	SCTP_EVENT_TIMEOUT_T2_SHUTDOWN,
75	SCTP_EVENT_TIMEOUT_T3_RTX,
76	SCTP_EVENT_TIMEOUT_T4_RTO,
77	SCTP_EVENT_TIMEOUT_T5_SHUTDOWN_GUARD,
78	SCTP_EVENT_TIMEOUT_HEARTBEAT,
79	SCTP_EVENT_TIMEOUT_RECONF,
80	SCTP_EVENT_TIMEOUT_SACK,
81	SCTP_EVENT_TIMEOUT_AUTOCLOSE,
82};
83
84#define SCTP_EVENT_TIMEOUT_MAX		SCTP_EVENT_TIMEOUT_AUTOCLOSE
85#define SCTP_NUM_TIMEOUT_TYPES		(SCTP_EVENT_TIMEOUT_MAX + 1)
86
87enum sctp_event_other {
88	SCTP_EVENT_NO_PENDING_TSN = 0,
89	SCTP_EVENT_ICMP_PROTO_UNREACH,
90};
91
92#define SCTP_EVENT_OTHER_MAX		SCTP_EVENT_ICMP_PROTO_UNREACH
93#define SCTP_NUM_OTHER_TYPES		(SCTP_EVENT_OTHER_MAX + 1)
94
95/* These are primitive requests from the ULP.  */
96enum sctp_event_primitive {
97	SCTP_PRIMITIVE_ASSOCIATE = 0,
98	SCTP_PRIMITIVE_SHUTDOWN,
99	SCTP_PRIMITIVE_ABORT,
100	SCTP_PRIMITIVE_SEND,
101	SCTP_PRIMITIVE_REQUESTHEARTBEAT,
102	SCTP_PRIMITIVE_ASCONF,
103	SCTP_PRIMITIVE_RECONF,
104};
105
106#define SCTP_EVENT_PRIMITIVE_MAX	SCTP_PRIMITIVE_RECONF
107#define SCTP_NUM_PRIMITIVE_TYPES	(SCTP_EVENT_PRIMITIVE_MAX + 1)
108
109/* We define here a utility type for manipulating subtypes.
110 * The subtype constructors all work like this:
111 *
112 *   union sctp_subtype foo = SCTP_ST_CHUNK(SCTP_CID_INIT);
113 */
114
115union sctp_subtype {
116	enum sctp_cid chunk;
117	enum sctp_event_timeout timeout;
118	enum sctp_event_other other;
119	enum sctp_event_primitive primitive;
120};
121
122#define SCTP_SUBTYPE_CONSTRUCTOR(_name, _type, _elt) \
123static inline union sctp_subtype	\
124SCTP_ST_## _name (_type _arg)		\
125{ union sctp_subtype _retval; _retval._elt = _arg; return _retval; }
126
127SCTP_SUBTYPE_CONSTRUCTOR(CHUNK,		enum sctp_cid,		chunk)
128SCTP_SUBTYPE_CONSTRUCTOR(TIMEOUT,	enum sctp_event_timeout, timeout)
129SCTP_SUBTYPE_CONSTRUCTOR(OTHER,		enum sctp_event_other,	other)
130SCTP_SUBTYPE_CONSTRUCTOR(PRIMITIVE,	enum sctp_event_primitive, primitive)
131
132
133#define sctp_chunk_is_data(a) (a->chunk_hdr->type == SCTP_CID_DATA || \
134			       a->chunk_hdr->type == SCTP_CID_I_DATA)
135
136/* Internal error codes */
137enum sctp_ierror {
138	SCTP_IERROR_NO_ERROR	        = 0,
139	SCTP_IERROR_BASE		= 1000,
140	SCTP_IERROR_NO_COOKIE,
141	SCTP_IERROR_BAD_SIG,
142	SCTP_IERROR_STALE_COOKIE,
143	SCTP_IERROR_NOMEM,
144	SCTP_IERROR_MALFORMED,
145	SCTP_IERROR_BAD_TAG,
146	SCTP_IERROR_BIG_GAP,
147	SCTP_IERROR_DUP_TSN,
148	SCTP_IERROR_HIGH_TSN,
149	SCTP_IERROR_IGNORE_TSN,
150	SCTP_IERROR_NO_DATA,
151	SCTP_IERROR_BAD_STREAM,
152	SCTP_IERROR_BAD_PORTS,
153	SCTP_IERROR_AUTH_BAD_HMAC,
154	SCTP_IERROR_AUTH_BAD_KEYID,
155	SCTP_IERROR_PROTO_VIOLATION,
156	SCTP_IERROR_ERROR,
157	SCTP_IERROR_ABORT,
158};
159
160
161
162/* SCTP state defines for internal state machine */
163enum sctp_state {
164
165	SCTP_STATE_CLOSED		= 0,
166	SCTP_STATE_COOKIE_WAIT		= 1,
167	SCTP_STATE_COOKIE_ECHOED	= 2,
168	SCTP_STATE_ESTABLISHED		= 3,
169	SCTP_STATE_SHUTDOWN_PENDING	= 4,
170	SCTP_STATE_SHUTDOWN_SENT	= 5,
171	SCTP_STATE_SHUTDOWN_RECEIVED	= 6,
172	SCTP_STATE_SHUTDOWN_ACK_SENT	= 7,
173
174};
175
176#define SCTP_STATE_MAX			SCTP_STATE_SHUTDOWN_ACK_SENT
177#define SCTP_STATE_NUM_STATES		(SCTP_STATE_MAX + 1)
178
179/* These are values for sk->state.
180 * For a UDP-style SCTP socket, the states are defined as follows
181 * - A socket in SCTP_SS_CLOSED state indicates that it is not willing to
182 *   accept new associations, but it can initiate the creation of new ones.
183 * - A socket in SCTP_SS_LISTENING state indicates that it is willing to
184 *   accept new  associations and can initiate the creation of new ones.
185 * - A socket in SCTP_SS_ESTABLISHED state indicates that it is a peeled off
186 *   socket with one association.
187 * For a TCP-style SCTP socket, the states are defined as follows
188 * - A socket in SCTP_SS_CLOSED state indicates that it is not willing to
189 *   accept new associations, but it can initiate the creation of new ones.
190 * - A socket in SCTP_SS_LISTENING state indicates that it is willing to
191 *   accept new associations, but cannot initiate the creation of new ones.
192 * - A socket in SCTP_SS_ESTABLISHED state indicates that it has a single
193 *   association.
194 */
195enum sctp_sock_state {
196	SCTP_SS_CLOSED         = TCP_CLOSE,
197	SCTP_SS_LISTENING      = TCP_LISTEN,
198	SCTP_SS_ESTABLISHING   = TCP_SYN_SENT,
199	SCTP_SS_ESTABLISHED    = TCP_ESTABLISHED,
200	SCTP_SS_CLOSING        = TCP_CLOSE_WAIT,
201};
202
203/* These functions map various type to printable names.  */
204const char *sctp_cname(const union sctp_subtype id);	/* chunk types */
205const char *sctp_oname(const union sctp_subtype id);	/* other events */
206const char *sctp_tname(const union sctp_subtype id);	/* timeouts */
207const char *sctp_pname(const union sctp_subtype id);	/* primitives */
208
209/* This is a table of printable names of sctp_state_t's.  */
210extern const char *const sctp_state_tbl[];
211extern const char *const sctp_evttype_tbl[];
212extern const char *const sctp_status_tbl[];
213
214/* Maximum chunk length considering padding requirements. */
215enum { SCTP_MAX_CHUNK_LEN = ((1<<16) - sizeof(__u32)) };
216
217/* Encourage Cookie-Echo bundling by pre-fragmenting chunks a little
218 * harder (until reaching ESTABLISHED state).
219 */
220enum { SCTP_ARBITRARY_COOKIE_ECHO_LEN = 200 };
221
222/* Guess at how big to make the TSN mapping array.
223 * We guarantee that we can handle at least this big a gap between the
224 * cumulative ACK and the highest TSN.  In practice, we can often
225 * handle up to twice this value.
226 *
227 * NEVER make this more than 32767 (2^15-1).  The Gap Ack Blocks in a
228 * SACK (see  section 3.3.4) are only 16 bits, so 2*SCTP_TSN_MAP_SIZE
229 * must be less than 65535 (2^16 - 1), or we will have overflow
230 * problems creating SACK's.
231 */
232#define SCTP_TSN_MAP_INITIAL BITS_PER_LONG
233#define SCTP_TSN_MAP_INCREMENT SCTP_TSN_MAP_INITIAL
234#define SCTP_TSN_MAP_SIZE 4096
235
236/* We will not record more than this many duplicate TSNs between two
237 * SACKs.  The minimum PMTU is 512.  Remove all the headers and there
238 * is enough room for 117 duplicate reports.  Round down to the
239 * nearest power of 2.
240 */
241enum { SCTP_MAX_DUP_TSNS = 16 };
242enum { SCTP_MAX_GABS = 16 };
243
244/* Heartbeat interval - 30 secs */
245#define SCTP_DEFAULT_TIMEOUT_HEARTBEAT	(30*1000)
246
247/* Delayed sack timer - 200ms */
248#define SCTP_DEFAULT_TIMEOUT_SACK	(200)
249
250/* RTO.Initial              - 3  seconds
251 * RTO.Min                  - 1  second
252 * RTO.Max                  - 60 seconds
253 * RTO.Alpha                - 1/8
254 * RTO.Beta                 - 1/4
255 */
256#define SCTP_RTO_INITIAL	(3 * 1000)
257#define SCTP_RTO_MIN		(1 * 1000)
258#define SCTP_RTO_MAX		(60 * 1000)
259
260#define SCTP_RTO_ALPHA          3   /* 1/8 when converted to right shifts. */
261#define SCTP_RTO_BETA           2   /* 1/4 when converted to right shifts. */
262
263/* Maximum number of new data packets that can be sent in a burst.  */
264#define SCTP_DEFAULT_MAX_BURST		4
265
266#define SCTP_CLOCK_GRANULARITY	1	/* 1 jiffy */
267
268#define SCTP_DEFAULT_COOKIE_LIFE	(60 * 1000) /* 60 seconds */
269
270#define SCTP_DEFAULT_MINWINDOW	1500	/* default minimum rwnd size */
271#define SCTP_DEFAULT_MAXWINDOW	65535	/* default rwnd size */
272#define SCTP_DEFAULT_RWND_SHIFT  4	/* by default, update on 1/16 of
273					 * rcvbuf, which is 1/8 of initial
274					 * window
275					 */
276#define SCTP_DEFAULT_MAXSEGMENT 1500	/* MTU size, this is the limit
277                                         * to which we will raise the P-MTU.
278					 */
279#define SCTP_DEFAULT_MINSEGMENT 512	/* MTU size ... if no mtu disc */
280
281#define SCTP_SECRET_SIZE 32		/* Number of octets in a 256 bits. */
282
283#define SCTP_SIGNATURE_SIZE 20	        /* size of a SLA-1 signature */
284
285#define SCTP_COOKIE_MULTIPLE 32 /* Pad out our cookie to make our hash
286				 * functions simpler to write.
287				 */
288
289/* These are the values for pf exposure, UNUSED is to keep compatible with old
290 * applications by default.
291 */
292enum {
293	SCTP_PF_EXPOSE_UNSET,
294	SCTP_PF_EXPOSE_DISABLE,
295	SCTP_PF_EXPOSE_ENABLE,
296};
297#define SCTP_PF_EXPOSE_MAX	SCTP_PF_EXPOSE_ENABLE
298
299#define SCTP_PS_RETRANS_MAX	0xffff
300
301/* These return values describe the success or failure of a number of
302 * routines which form the lower interface to SCTP_outqueue.
303 */
304enum sctp_xmit {
305	SCTP_XMIT_OK,
306	SCTP_XMIT_PMTU_FULL,
307	SCTP_XMIT_RWND_FULL,
308	SCTP_XMIT_DELAY,
309};
310
311/* These are the commands for manipulating transports.  */
312enum sctp_transport_cmd {
313	SCTP_TRANSPORT_UP,
314	SCTP_TRANSPORT_DOWN,
315	SCTP_TRANSPORT_PF,
316};
317
318/* These are the address scopes defined mainly for IPv4 addresses
319 * based on draft of SCTP IPv4 scoping <draft-stewart-tsvwg-sctp-ipv4-00.txt>.
320 * These scopes are hopefully generic enough to be used on scoping both
321 * IPv4 and IPv6 addresses in SCTP.
322 * At this point, the IPv6 scopes will be mapped to these internal scopes
323 * as much as possible.
324 */
325enum sctp_scope {
326	SCTP_SCOPE_GLOBAL,		/* IPv4 global addresses */
327	SCTP_SCOPE_PRIVATE,		/* IPv4 private addresses */
328	SCTP_SCOPE_LINK,		/* IPv4 link local address */
329	SCTP_SCOPE_LOOPBACK,		/* IPv4 loopback address */
330	SCTP_SCOPE_UNUSABLE,		/* IPv4 unusable addresses */
331};
332
333enum {
334	SCTP_SCOPE_POLICY_DISABLE,	/* Disable IPv4 address scoping */
335	SCTP_SCOPE_POLICY_ENABLE,	/* Enable IPv4 address scoping */
336	SCTP_SCOPE_POLICY_PRIVATE,	/* Follow draft but allow IPv4 private addresses */
337	SCTP_SCOPE_POLICY_LINK,		/* Follow draft but allow IPv4 link local addresses */
338};
339
340#define SCTP_SCOPE_POLICY_MAX	SCTP_SCOPE_POLICY_LINK
341
342/* Based on IPv4 scoping <draft-stewart-tsvwg-sctp-ipv4-00.txt>,
343 * SCTP IPv4 unusable addresses: 0.0.0.0/8, 224.0.0.0/4, 192.88.99.0/24.
344 * Also, RFC 8.4, non-unicast addresses are not considered valid SCTP
345 * addresses.
346 */
347#define IS_IPV4_UNUSABLE_ADDRESS(a)	    \
348	((htonl(INADDR_BROADCAST) == a) ||  \
349	 ipv4_is_multicast(a) ||	    \
350	 ipv4_is_zeronet(a) ||		    \
351	 ipv4_is_anycast_6to4(a))
352
353/* Flags used for the bind address copy functions.  */
354#define SCTP_ADDR4_ALLOWED	0x00000001	/* IPv4 address is allowed by
355						   local sock family */
356#define SCTP_ADDR6_ALLOWED	0x00000002	/* IPv6 address is allowed by
357						   local sock family */
358#define SCTP_ADDR4_PEERSUPP	0x00000004	/* IPv4 address is supported by
359						   peer */
360#define SCTP_ADDR6_PEERSUPP	0x00000008	/* IPv6 address is supported by
361						   peer */
362
363/* Reasons to retransmit. */
364enum sctp_retransmit_reason {
365	SCTP_RTXR_T3_RTX,
366	SCTP_RTXR_FAST_RTX,
367	SCTP_RTXR_PMTUD,
368	SCTP_RTXR_T1_RTX,
369};
370
371/* Reasons to lower cwnd. */
372enum sctp_lower_cwnd {
373	SCTP_LOWER_CWND_T3_RTX,
374	SCTP_LOWER_CWND_FAST_RTX,
375	SCTP_LOWER_CWND_ECNE,
376	SCTP_LOWER_CWND_INACTIVE,
377};
378
379
380/* SCTP-AUTH Necessary constants */
381
382/* SCTP-AUTH, Section 3.3
383 *
384 *  The following Table 2 shows the currently defined values for HMAC
385 *  identifiers.
386 *
387 *  +-----------------+--------------------------+
388 *  | HMAC Identifier | Message Digest Algorithm |
389 *  +-----------------+--------------------------+
390 *  | 0               | Reserved                 |
391 *  | 1               | SHA-1 defined in [8]     |
392 *  | 2               | Reserved                 |
393 *  | 3               | SHA-256 defined in [8]   |
394 *  +-----------------+--------------------------+
395 */
396enum {
397	SCTP_AUTH_HMAC_ID_RESERVED_0,
398	SCTP_AUTH_HMAC_ID_SHA1,
399	SCTP_AUTH_HMAC_ID_RESERVED_2,
400#if defined (CONFIG_CRYPTO_SHA256) || defined (CONFIG_CRYPTO_SHA256_MODULE)
401	SCTP_AUTH_HMAC_ID_SHA256,
402#endif
403	__SCTP_AUTH_HMAC_MAX
404};
405
406#define SCTP_AUTH_HMAC_ID_MAX	__SCTP_AUTH_HMAC_MAX - 1
407#define SCTP_AUTH_NUM_HMACS 	__SCTP_AUTH_HMAC_MAX
408#define SCTP_SHA1_SIG_SIZE 20
409#define SCTP_SHA256_SIG_SIZE 32
410
411/*  SCTP-AUTH, Section 3.2
412 *     The chunk types for INIT, INIT-ACK, SHUTDOWN-COMPLETE and AUTH chunks
413 *     MUST NOT be listed in the CHUNKS parameter
414 */
415#define SCTP_NUM_NOAUTH_CHUNKS	4
416#define SCTP_AUTH_MAX_CHUNKS	(SCTP_NUM_CHUNK_TYPES - SCTP_NUM_NOAUTH_CHUNKS)
417
418/* SCTP-AUTH Section 6.1
419 * The RANDOM parameter MUST contain a 32 byte random number.
420 */
421#define SCTP_AUTH_RANDOM_LENGTH 32
422
423#endif /* __sctp_constants_h__ */
424